Reversible Hydrogen Electrode Research Articles

Designing a Phenalenyl-Based Dinuclear Ni(II) Complex: An Electrocatalyst with Two Single Ni Sites for the Oxygen Evolution Reaction (OER).

A new dinuclear Ni(II) complex 1, [Ni2II(dtbh-PLY)2], is synthesized from 9-(2-(3,6-di-tert-butyl-2-hydroxybenzylidene)hydrazineyl)-1H-phenalen-1-one, dtbh-PLYH2 ligand, and structurally characterized by various analytical tools including the single-crystal X-ray diffraction (SCXRD) technique. In the solid state, both Ni(II) metal centers in complex 1 exist in a distorted square planar geometry and display the presence of rare Ni···H-C anagostic interactions to form a one-dimensional (1-D) linear motif in the supramolecular array. Complex 1 is further stabilized in the solid state by π-π-stacking interactions between the highly delocalized phenalenyl rings. The redox features of complex 1 have been analyzed by the cyclic voltammetry (CV) technique in solution as well as in the solid state, revealing the crucial involvement of both the Ni(II) metal centers for undergoing quasi-reversible oxidation reactions on the application of an anodic sweep. A complex 1-modified glassy carbon electrode, GC-1, is employed as an electrocatalyst for oxygen evolution reaction (OER) in 1.0 M KOH, giving an OER onset at 1.45 V, and very low OER overpotential, 300 mV vs the reversible hydrogen electrode (RHE) to reach 10 mA cm-2 current density. Furthermore, GC-1 displayed fast OER kinetics with a Tafel slope of 40 mV dec-1, a significantly lower Tafel slope value than those of previously reported molecular Ni(II) catalysts. In situ electrochemical experiments and postoperational UV-vis, Fourier transform infrared (FT-IR), scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDS), and X-ray photoelectron spectroscopy (XPS) studies were performed to analyze the stability of the molecular nature of complex 1 and to gain reasonable insights into the true OER catalyst.

Cu-Mo Dual Sites in Cu-Doped MoSe2 for Enhanced Electrosynthesis of Urea.

The quest for sustainable urea production has directed attention toward electrocatalytic methods that bypass the energy-intensive traditional Haber-Bosch process. This study introduces an approach to urea synthesis through the coreduction of CO2 and NO3- using copper-doped molybdenum diselenide (Cu-MoSe2) with Cu-Mo dual sites as electrocatalysts. The electrocatalytic activity of the Cu-MoSe2 electrode is characterized by a urea yield rate of 1235 μg h-1 mgcat.-1 at -0.7 V versus the reversible hydrogen electrode and a maximum Faradaic efficiency of 23.43% at -0.6 V versus RHE. Besides, a continuous urea production with an enhanced average yield rate of 9145 μg h-1 mgcat.-1 can be achieved in a flow cell. These figures represent a substantial advancement over that of the baseline MoSe2 electrode. Density functional theory (DFT) calculations elucidate that Cu doping accelerates *NO2 deoxygenation and significantly decreases the energy barriers for C-N bond formation. Consequently, Cu-MoSe2 demonstrates a more favorable pathway for urea production, enhancing both the efficiency and feasibility of the process. This study offers valuable insights into electrode design and understanding of the facilitated electrochemical pathways.

Asymmetric Coordination of Bimetallic Fe-Co Single-Atom Pairs toward Enhanced Bifunctional Activity for Rechargeable Zinc-Air Batteries.

The advancement of rechargeable zinc-air batteries (RZABs) faces challenges from the pronounced polarization and sluggish kinetics of oxygen reduction and evolution reactions (ORR and OER). Single-atom catalysts offer an effective solution, yet their insufficient or singular catalytic activity hinders their development. In this work, a dual single-atom catalyst, FeCo-SAs, was fabricated, featuring atomically dispersed N3-Fe-Co-N4 sites on N-doped graphene nanosheets for bifunctional activity. Introducing Co into Fe single-atoms and secondary pyrolysis altered Fe coordination with N, creating an asymmetric environment that promoted charge transfer and increased the density of states near the Fermi level. This catalyst achieved a narrow potential gap of 0.616 V, with a half-wave potential of 0.884 V for ORR (vs the reversible hydrogen electrode) and a low OER overpotential of 270 mV at 10 mA cm-2. Owing to the superior activity of FeCo-SAs, RZABs exhibited a peak power density of 203.36 mW cm-2 and an extended cycle life of over 550 h, exceeding the commercial Pt/C + IrO2 catalyst. Furthermore, flexible RZABs with FeCo-SAs demonstrated the promising future of bimetallic pairs in wearable energy storage devices.

Crystalline Silicon Photocathode with Tapered Microwire Arrays Achieving a High Current Density of 41.7 mA cm⁻2

AbstractTo design a high‐efficiency crystalline silicon (c‐Si) photocathode, the photovoltage and photocurrent generated by the device must be maximized because these factors directly affect the hydrogen evolution reaction (HER). In this study, a c‐Si p–n junction is used to enhance the photovoltage of the c‐Si photocathode, and a tapered microwire array structure is introduced to increase the photocurrent. When tapered microwire arrays are employed on the front surface of the c‐Si photocathode, a current density of ≈41.7 mA cm−2 is achieved at 0 VRHE (reversible hydrogen electrode); this current density is the highest among all reported photocathodes including c‐Si, approaching the theoretical maximum value for c‐Si. Furthermore, a Ni foil/Pt catalyst is introduced on the opposite side of the incident light, simultaneously serving as an electrocatalyst to reduce side reactions in the HER and encapsulation layer to prevent c‐Si from contacting the electrolyte. Thus, a stable device is developed using c‐Si photoelectrochemical cells that have an efficiency exceeding 97% for >1000 h.

Electrocatalytic Glycerol Conversion: A Low-Voltage Pathway to Efficient Carbon-Negative Green Hydrogen and Value-Added Chemical Production.

Electrochemical glycerol oxidation reaction (GLYOR) could be a promising way to use the abundantly available glycerol for production of value-added chemicals and fuels. Completely avoiding the oxygen evolution reaction (OER) with GLYOR is an evolving strategy to reduce the overall cell potential and generate value-added chemicals and fuels on both the anode and cathode. We demonstrate the morphology-controlled palladium nanocrystals, afforded by colloidal chemistry, and their established morphology-dependent GLYOR performance. Although it is known that controlling the morphology of an electrocatalyst can modulate the activity and selectivity of the products, still it is a relatively underexplored area for many reactions, including GLYOR. Among nanocube (Pd-NC), truncated octahedron (Pd-TO), spherical and polycrystalline (Pd-PC) morphologies, the Pd-NC electrocatalyst deposited on a Ni foam exhibits the highest glycerol conversion (85%) along with 42% glyceric acid selectivity at a low applied potential of 0.6 V (vs reversible hydrogen electrode (RHE)) in 0.1 M glycerol and 1 M KOH at ambient temperature. Owing to the much favorable thermodynamics of GLYOR on the Pd-NC surface, the assembled electrolyzer requires an electricity input of only ∼3.7 kWh/m3 of H2 at a current density of 100 mA/cm2, in contrast to the requirement of ≥5 kWh/m3 of H2 with an alkaline/PEM electrolyzer. Sustainability has been successfully demonstrated at 10 and 50 mA/cm2 and up to 120 h with GLYOR in water and simulated seawater.

Synthesis of N‐propanol from CO2 Electroreduction on Bicontinuous Cu2O/Cu Nanodomains

n‐propanol is an important pharmaceutical and pesticide intermediate. To produce n‐propanol by electrochemical reduction of CO2 is a promising way, but is largely restricted by the very low selectivity and activity. How to promote the coupling of *C1 and *C2 intermediates to form the *C3 intermediate for n‐propanol formation is challenging. Here, we propose the construction of bicontinuous structure of Cu2O/Cu electrocatalyst, which consists of ultra‐small Cu2O nanodomains, Cu nanodomains and large amounts of grain boundaries between Cu2O and Cu nanodomains. The n‐propanol current density is as high as 101.6 mA cm−2 at the applied potential of −1.1 V vs. reversible hydrogen electrode in flow cell, with the Faradaic efficiency up to 12.1%. Moreover, the catalyst keeps relatively stable during electrochemical CO2 reduction process. Experimental studies and theoretical calculations reveal that the bicontinuous structure of Cu2O/Cu can facilitate the *CO formation, *CO‐*CO coupling and *CO‐*OCCO coupling for the final generation of n‐propanol.

Strategies for Achieving Ultra-Long ORR Durability-Rh Activates Interatomic Interactions in Alloys.

The stability of platinum-based alloy catalysts is crucial for the future development of proton exchange membrane fuel cells, considering the potential dissolution of transition metals under complex operating conditions. Here, we report on a Rh-doped Pt3Co alloy that exhibits strong interatomic interactions, thereby enhancing the durability of fuel cells. The Rh-Pt3Co/C catalyst demonstrates exceptional catalytic activity for oxygen reduction reactions (ORR) (1.31 A mgPt -1 at 0.9 V vs. the reversible hydrogen electrode (RHE) and maintaining 92 % of its mass activity after 170,000 potential cycles). Long-term testing has shown direct inhibition of Co dissolution in Rh-Pt3Co/C. Furthermore, tests on proton exchange membrane fuel cells (PEMFC) have shown excellent performance and long-term durability with low Pt loading. After 50,000 cycles, there was no voltage loss at 0.8 A cm-2 for Rh-Pt3Co/C, while Pt3Co/C experienced a loss of 200 mV. Theoretical calculations suggest that introducing transition metal atoms through doping creates a stronger compressive strain, which in turn leads to increased catalytic activity. Additionally, Rh doping increases the energy barrier for Co diffusion in the bulk phase, while also raising the vacancy formation energy of the surface Pt. This ensures the long-term stability of the alloy over the course of the cycle.

Strategies for Achieving Ultra‐Long ORR Durability—Rh Activates Interatomic Interactions in Alloys

AbstractThe stability of platinum‐based alloy catalysts is crucial for the future development of proton exchange membrane fuel cells, considering the potential dissolution of transition metals under complex operating conditions. Here, we report on a Rh‐doped Pt3Co alloy that exhibits strong interatomic interactions, thereby enhancing the durability of fuel cells. The Rh−Pt3Co/C catalyst demonstrates exceptional catalytic activity for oxygen reduction reactions (ORR) (1.31 A mgPt−1 at 0.9 V vs. the reversible hydrogen electrode (RHE) and maintaining 92 % of its mass activity after 170,000 potential cycles). Long‐term testing has shown direct inhibition of Co dissolution in Rh−Pt3Co/C. Furthermore, tests on proton exchange membrane fuel cells (PEMFC) have shown excellent performance and long‐term durability with low Pt loading. After 50,000 cycles, there was no voltage loss at 0.8 A cm−2 for Rh−Pt3Co/C, while Pt3Co/C experienced a loss of 200 mV. Theoretical calculations suggest that introducing transition metal atoms through doping creates a stronger compressive strain, which in turn leads to increased catalytic activity. Additionally, Rh doping increases the energy barrier for Co diffusion in the bulk phase, while also raising the vacancy formation energy of the surface Pt. This ensures the long‐term stability of the alloy over the course of the cycle.

Synthesis of N-propanol from CO2 Electroreduction on Bicontinuous Cu2O/Cu Nanodomains.

n-propanol is an important pharmaceutical and pesticide intermediate. To produce n-propanol by electrochemical reduction of CO2 is a promising way, but is largely restricted by the very low selectivity and activity. How to promote the coupling of *C1 and *C2 intermediates to form the *C3 intermediate for n-propanol formation is challenging. Here, we propose the construction of bicontinuous structure of Cu2O/Cu electrocatalyst, which consists of ultra-small Cu2O nanodomains, Cu nanodomains and large amounts of grain boundaries between Cu2O and Cu nanodomains. The n-propanol current density is as high as 101.6 mA cm-2 at the applied potential of -1.1 V vs. reversible hydrogen electrode in flow cell, with the Faradaic efficiency up to 12.1%. Moreover, the catalyst keeps relatively stable during electrochemical CO2 reduction process. Experimental studies and theoretical calculations reveal that the bicontinuous structure of Cu2O/Cu can facilitate the *CO formation, *CO-*CO coupling and *CO-*OCCO coupling for the final generation of n-propanol.

Rapid Surface Reconstruction of In2S3 Photoanode via Flame Treatment for Enhanced Photoelectrochemical Performance.

Surface reconstruction, re-organizing the surface atoms or structure, is a promising strategy to manipulate materials' electrical, electrochemical, and surface catalytic properties. Herein, we demonstrate a rapid surface reconstruction of indium sulfide (In2S3) via a high-temperature flame treatment to improve its charge collection properties. The flame process selectively transforms the In2S3 surface into a diffusionless In2O3 layer with high crystallinity. Additionally, it controllably generates bulk sulfur (S) vacancies within a few seconds, leading to surface-reconstructed In2S3 (sr-In2S3). When using those sr-In2S3 as photoanode for photoelectrochemical (PEC) water splitting devices, these dual functions of surface In2O3/bulk In2S3 reduce the charge recombination in the surface and bulk region, thus improving photocurrent density and stability. With optimized surface reconstruction, the sr-In2S3 photoanode demonstrates a significant photocurrent density of 8.5mA/cm2 at 1.23V versus a reversible hydrogen electrode (RHE), marking a 2.5-fold increase compared to pristine In2S3 (3.5mA/cm2). More importantly, the sr-In2S3 photoanode exhibited an impressive photocurrent density of 7.3mA/cm2 at 0.6V versus RHE for iodide oxidation reaction (IOR). We also showcase a practical and scalable surface reconstruction via flame treatment. Our work provides new insights for surface reconstruction engineering in sulfide-based semiconductors, making a breakthrough in developing efficient solar-fuel energy devices. This article is protected by copyright. All rights reserved.

Systematic Constructing FeOCl/BiVO4 Hetero-Interfacial Hybrid Photoanodes for Efficient Photoelectrochemical Water Splitting.

Bismuth vanadate (BiVO4), as a promising photoanode for photoelectrochemical (PEC) water splitting, suffers from poor charge separation efficiency and light absorption efficiency. Herein, iron oxychloride (FeOCl) is introduced as a novel cocatalyst simply grafted on BiVO4 to construct an integrated photoanode, enhancing PEC performance. The optimized FeOCl/BiVO4 photoanode exhibits a superior photocurrent density value of 5.23mAcm-2 at 1.23V versus reversible hydrogen electrode (RHE) under AM 1.5G illuminations. From experimental analysis, such high PEC performance is ascribed to the unique properties of FeOCl, facilitating charge transport, increasing light absorption efficiency, and promoting water oxidation kinetics. Density functional theory calculations further confirm that FeOCl optimizes the Gibbs free energy of H and O-containing intermediates (OOH*) during PEC processes, boosting the catalytic kinetics of PEC water splitting. This work presents FeOCl as a promising catalyst for constructing high efficient PEC water-splitting photoanodes.

Understanding the Activation Mechanism of RhCrOx Cocatalysts for Hydrogen Evolution with Nanoparticulate Electrodes.

Mixed oxides of Rh-Cr (RhCrOx), containing Rh3+ and Cr3+ cations, are commonly used as cocatalysts for the hydrogen evolution reaction (HER) on particulate photocatalysts. The precise physicochemical mechanisms of the HER at the catalytic sites of these oxides are not well understood. In this study, model cocatalyst electrodes, composed of nanoparticulate RhCrOx, were fabricated to investigate the physicochemical mechanisms of the HER. Electroanalytical and X-ray photoelectron spectroscopic measurements revealed that nanoparticulate RhCrOx produces reduced Rh (Rh0) species by maintaining an electrode potential more negative than 0.03 V versus the reversible hydrogen electrode (VRHE). This results in significant enhancement of the HER activity. The catalytic activity for the HER stems from the reduced Rh species, and the inclusion of Cr3+ (CrOx) aided in the electron transfer process at the solid/liquid interface, resulting in a higher current density during the HER. To achieve a solar-to-hydrogen efficiency of over 3%, the conduction band minimum of the particulate photocatalyst should be positioned more negatively than -0.10 VRHE. Moreover, the formation of electron trap states at potentials more positive than 0.03 VRHE should be avoided. This study highlights the importance of understanding the catalytic sites on metal oxide cocatalysts. Moreover, it offers a design strategy for enhancing the efficiency of photocatalytic water splitting.

Breaking the Scaling Relationship in C−N Coupling via the Doping Effects for Efficient Urea Electrosynthesis

AbstractElectrochemical C−N coupling reaction based on carbon dioxide and nitrate have been emerged as a new “green synthetic strategy” for the synthesis of urea, but the catalytic efficiency is seriously restricted by the inherent scaling relations of adsorption energies of the active sites, the improvement of catalytic activity is frequently accompanied by the decrease in selectivity. Herein, a doping engineering strategy was proposed to break the scaling relationship of intermediate binding and minimize the kinetic barrier of C−N coupling. A thus designed SrCo0.39Ru0.61O3−δ catalyst achieves a urea yield rate of 1522 μg h−1 mgcat.−1 and faradic efficiency of 34.1 % at −0.7 V versus reversible hydrogen electrode. A series of characterizations revealed that Co doping not only induces lattice distortion but also creates rich oxygen vacancies (OV) in the SrRuO3. The oxygen vacancies weaken the adsorption of *CO and *NH2 intermediates on the Co and Ru sites respectively, and the strain effects over the Co−Ru dual sites promoting the occurrence of C−N coupling of the two monomers instead of selective hydrogenating to form by‐products. This work presents an insight into molecular coupling reactions towards urea synthesis via the doping engineering on SrRuO3.

Steering benzyl alcohol electrooxidation coupled with hydrogen evolution via hetero‐interface construction

AbstractIt is still a challenge to develop electrocatalyst for the efficient adsorption and conversion of organic molecule in aqueous media. Herein, a hetero‐interface structure based on CuO@Ni(OH)2 is rationally designed to enhance the performance of benzyl alcohol oxidation to benzoic acid. A high Faradaic efficiency of 99% and the yield of 3.09 mmol cm−2 h−1 are achieved at 1.70 V versus reversible hydrogen electrode, outperforming the previously reported electrocatalysts. Furthermore, a membrane‐free flow electrolyzer was assembled based on CuO@Ni(OH)2 hetero‐interface, exhibiting a much high yielding of benzoic acid (6.73 mmol cm−2 h−1) and hydrogen (0.35 L cm−2 h−1) with excellent stability. Both experimental data and density functional theory calculations verify that the electron is tend to accumulate at the hetero‐interface, thus accelerating the adsorption of reactant and intermediate and reducing the energy barrier of the conversion of benzyl alcohol to benzoic acid.

3D printed CuFe2O4 electrode with dominant facet (111) for boosting hydrogen evolution performance

The utilization of hydrogen energy is an important way to low carbon economy, and the development of active electrodes is the most critical step for efficient hydrogen evolution reaction. With the addition of KNO3 as a capping agent, the exposed crystal facet of CuFe2O4 is regulated, and the crystal facet (111) becomes dominant. Compared to CuFe2O4 (3 1 1), CuFe2O4 (111) exhibits low barrier of water dissociation and suitable *H binding strength, resulting in high intrinsic activity. Furthermore, the 3D printed electrodes show more excellent performance. At 3D printed CuFe2O4 (111) electrode, the overpotential is only 152 mV (vs. reversible hydrogen electrode) at 100 mA cm−2, and Tafel slope is as low as 33 mV dec-1. In addition, 3D printed CuFe2O4 (111) electrodes shows high stability. The superior performance of 3D printed CuFe2O4 (111) electrodes originates from high intrinsic activity and more exposed active sites. This study provides a new path for the development of efficient, stable and inexpensive monolithic catalyst electrodes for alkaline hydrogen evolution.

Carbon Corrosion Induced by Surface Defects Accelerates Degradation of Platinum/Graphene Catalysts in Oxygen Reduction Reaction.

Graphene supported electrocatalysts have demonstrated remarkable catalytic performance for oxygen reduction reaction (ORR). However, their durability and cycling performance are greatly limited by Oswald ripening of platinum (Pt) and graphene support corrosion. Moreover, comprehensive studies on the mechanisms of catalysts degradation under 0.6-1.6V versus RHE (Reversible Hydrogen Electrode) is still lacking. Herein, degradation mechanisms triggered by different defects on graphene supports are investigated by two cycling protocols. In the start-up/shutdown cycling (1.0-1.6V vs.RHE), carbon oxidation reaction (COR) leads to shedding or swarm-like aggregation of Pt nanoparticles (NPs). Theoretical simulation results show that the expansion of vacancy defects promotes reaction kinetics of the decisive step in COR, reducing its reaction overpotential. While under the load cycling (0.6-1.0V vs.RHE), oxygen containing defects lead to an elevated content of Pt in its oxidation state which intensifies Oswald ripening of Pt. The presence of vacancy defects can enhance the transfer of electrons from graphene to the Pt surface, reducing the d-band center of Pt and making it more difficult for the oxidation state of platinum to form in the cycling. This work will provide comprehensive understanding on Pt/Graphene catalysts degradation mechanisms.

Facile Preparation of Stable NiII‐ and CoII‐tetraaminophthalocyanine Electropolymers for Highly Efficient Heterogeneous Carbon Dioxide Reduction

This study focused on preparation of stable polymer films of NiII‐ and CoII‐tetraaminophthalocyanines, p‐NiTAPc and p‐CoTAPc, respectively, for highly efficient heterogeneous electrochemical carbon dioxide (CO2) reduction in a flow electrolysis cell. Major development represented in this work was fabrication of p‐NiTAPc and p‐CoTAPc films via electropolymerization of their corresponding monomers on carbon‐based substrates without using binder or conducting additive materials to obtain efficient gas diffusion electrodes (GDEs) for scalable, productive and selective CO2‐to‐CO conversion. The target polymers were characterized by UV‐visible spectrophotometry, attenuated total reflection‐Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X‐ray spectroscopy and cyclic voltammetry. According to controlled potential electrolysis and gas chromatography, p‐NiTAPc‐catalyzed CO2 reduction at –0.99V vs. reversible hydrogen electrode (RHE) gave 953 mL of CO in a period of 16 hours with current density and Faradaic efficiency (FE) of 109±1 mA·cm‐2 and 99±2%, respectively. A p‐CoTAPc‐modified GDE exhibited superior catalytic performance to the case of p‐NiTAPc in terms of catalyst stability and CO productivity by performing the continuous CO2 reduction at the potential of –1.10 V vs. RHE for up to 41 hours and affording almost 3 times higher amount of CO with the current density of 161±5 mA/cm2 and 95±2% FE.

Lattice-dislocated bismuth nanowires formed by in-situ chemical etching on copper foam for enhanced electrocatalytic CO2 reduction

Electrochemical CO2 reduction reaction (CO2RR) to HCOOH is one of the most feasible and economical methods to achieve carbon neutrality. Bismuth (Bi), as a metal catalyst for CO2RR, is considered to have great potential for application and has been widely studied due to its high formate selectivity, low toxicity, cheapness, and abundance. Unfortunately, low current density and short electrode lifetime have hindered its progress towards practical applications. In this work, we present a method that enables the chemical etching of Bi on Cu, which is capable of spontaneously accomplishing the loading of Bi on Cu foam in the liquid phase at room temperature. Additionally, to provide more abundant catalytically active sites, twisted Bi nanowires (BiNWs) with lattice dislocations were successfully prepared on the surface of Cu foam using a three-step chemical method involving oxidation, reduction, and in-situ etching. The Cu Foam@BiNWs was found to be a highly active electrocatalyst for CO2 reduction to formate at a low applied potential, achieving a faradaic efficiency for formate (FEFormate) of 95 % and a formate partial current density of ∼ 12 mA cm−2 at −0.78 V vs. RHE (reversible hydrogen electrode). Even within such a wide potential window of −0.68 ∼ -1.08 V vs. RHE, the FEFormate is consistently above 90 %. Such exceptional CO2 reduction activity can be attributed to the distortions and lattice dislocations present in the surface BiNWs. Furthermore, the Cu Foam@BiNWs electrode demonstrated a total current density close to 100 mA cm−2 at −0.98 V in an alkaline flow cell, while maintaining excellent catalytic stability over a prolonged 30-hour period of high current density electrochemical activity, thus showing potential for advancing the industrialisation of formate production. This work emphasizes the crucial role of size-dependent catalysis and crystal defect engineering strategies in the field of electrocatalysis, elucidates the mechanism of the rate-determining step (RDS) in the electrocatalytic CO2 reduction process on the developed catalysts, which can provide valuable insights into the design and development of high performance electrocatalysts not only in CO2RR but also in other fields.

Highly coordinated Ni-N5 sites for efficient electrocatalytic CO2 reduction toward CO with faradaic efficiency exceeding 99%

Electrochemical production of high value-added CO from CO2 on transition metal-nitrogen-carbon (M−N−C) catalysts is a promising approach to achieve carbon neutral economy, yet the quest for robust catalysts is driven by achieving > 96 % CO faradaic efficiency (FE) under low overpotential and wide potential range. Herein, we report a novel synthetic approach involving post-metallization of the pre-synthesized N-doped carbon (NC-T) support for the fabrication of robust and efficient Ni@NC-T quasi-molecular catalysts toward CO2 electroreduction reaction (CO2RR). The optimum Ni@NC-1100 catalyst exhibited an extremely high FECO > 99 % at −0.72 V vs. reversible hydrogen electrode (RHE). Of interest is the FECO maintained above 96 % over a wide potential window from −0.52 V to −1.12 V. Density functional theory (DFT) calculation validated that the presence of axial pyrrolic-N significantly enhances the Ni-N5 active site for CO2 activation, resulting in the lowest activation energy for the *COOH intermediate generation compared to other axial ligands.

Selective glucose electro-oxidation catalyzed by TEMPO on graphite felt

Long-term electrolyses of glucose in a potassium carbonate (K2CO3) aqueous electrolyte have been performed on graphite felt electrodes with TEMPO as a homogeneous catalyst. The influences of the operating conditions (initial concentrations of glucose, TEMPO, and K2CO3 along with applied anode potential) on the conversion, selectivity toward gluconate/glucarate, and faradaic efficiency were assessed first. Then, optimizations of the conversion, selectivity, and faradaic efficiency were performed using design of experiments based on the L9 (34) Taguchi table, which resulted in 84% selectivity toward gluconate with 71% faradaic efficiency for up to 79% glucose conversion. Side products such as glucaric acid were also obtained when the applied potential exceeded 1.5 V vs. reversible hydrogen electrode.