Reverse Martensitic Transformation Temperature Research Articles

Reverse martensitic transformation in yttria-partially stabilized zirconia with TiO 2 addition

Reverse martensitic transformations of monoclinic to tetragonal ZrO 2 in yttria-partially stabilized zirconia with various amounts of TiO 2 solution were studied by a grinding test. The relative amount of m-ZrO 2 was estimated by X-ray diffraction. The results indicate that TiO 2 decreases the tetragonal-to-monoclinic ZrO 2 martensitic transformation temperature but increases the reverse martensitic transformation temperature.

The shape memory effect and martensitic transformation in alloyed titanium nickelide

1. A change in direct and reverse martensitic transformation temperatures and also thermomechanical shape change for titanium nickelide depend on the nature of alloying elements. Alloying elements of group VA (V, Nb, Ta) lead to a small reduction or even an increase (with addition of tantalum) in these temperatures. In contrast, elements of groups VIA and VIIIA (Fe, Co, Cr) sharply reduce the transformation temperatures. 2. Alloys containing niobium have a positive martensitic transformation hysteresis AS-MS with all of the test concentrations both under load and without it. 3. Hot plastic deformation affects in different ways the martensitic points in relation to alloying element content and its nature: in slightly alloyed materials the MS temperature is reduced, but in more highly alloyed materials it increases; the AS point in alloys with iron and niobium is increased with plastic deformation.