Diels-Alder Research Articles

A comprehensive understanding of the mechanism of the biomimetic total synthesis of brevianamide A.

Recently, several studies on the chemical synthesis of brevianamide A (BA) were reported. In particular, a highly efficient and remarkably selective synthetic strategy was reported by Lawrence's group. However, a unified mechanistic understanding of these results is still lacking. We have carried out a DFT study and proposed a unified mechanism to understand these experimental results. Starting from intermediate 2, the most favorable reaction sequence is a fast tautomerization, followed by a σ-migration of the base moiety, and a final inverse-electron demanding Diels-Alder reaction, resulting in the formation of the BA product stereoselectively. This reaction mechanism can also be applied to understand the biosynthesis of BA that involves enzymatic catalysis.

Serendipitous synthesis of phenanthrene derivatives by exploiting electrocyclization during thermolysis of Diels-Alder intermediate dihydrodibenzothiophene-S,S-dioxides.

The Diels-Alder reaction of tetraaryl cyclopentadienones with benzo[b]thiophene-S,S-dioxides in nitrobenzene under reflux led to the formation of aryl/hetero-aryl fused phenanthrene derivatives via SO2 elimination of the intermediate dihydrodibenzothiophene-S,S-dioxides followed by 6π-electrocyclization and subsequent aromatization. The 6π-electrocyclization methodology was found to be applicable for assembling a wide variety of phenanthrene derivatives in good to moderate yields.

Enantioselective synthesis of spirooxindole-pyran derivatives via a remote inverse-electron-demand Diels-Alder reaction of β,γ-unsaturated amides.

Novel construction methods for obtaining 3,4'-pyran spirooxindole heterocyclic skeletons have always been the focus of attention. Herein, we report a highly enantioselective inverse-electron-demand oxa-Diels-Alder cycloaddition reaction of a β,γ-unsaturated pyrazole amide and a N-diphenyl isatin-derived oxodiene using a bifunctional catalyst. In addition, large-scale experiments confirmed the reliability of the reaction. The resultant products of this study can be further transformed.

Development of Functional Compounds Using Chemically Unstable Compounds Obtained from Medicinal Plants

Sulfur- or nitrogen-containing compounds from medicinal plants exhibit various biological activities such as anticancer potential. Developing efficient strategies to isolate or synthesize these compounds or their derivatives is a remarkable achievement. We have isolated several sulfur-containing compounds such as tetrahydro-2H-difuro[3,2-b:2',3'-c]furan-5(5aH)-one derivatives from Allium plants. We have devised a unique approach for the rapid preparation of thiopyranones using the regioselective sequential double Diels-Alder reaction; we used a naturally-occurring chemically-unstable intermediate such as thioacrolein, which is produced from allicin, a major component in garlic. The cytotoxicity of the synthetic thiopyranones against cancer stem cells (CSCs) was equal to or higher than that of (Z)-ajoene, the reference compound.

Useful 1,2-dioxygenated dienes: syntheses and Diels–Alder reactions en route to substituted 2-naphthols and phenols

The alkenylation reaction of vinylene carbonate with vinyl triflates using a Pd catalyst provides an access to 1,2-dioxygenated dienes, which undergo a tandem DA cycloaddition/decarboxylative aromatization reaction to give 2-naphthols and phenols.

Synthesis and biological evaluation of cleistocaltone A, an inhibitor of respiratory syncytial virus (RSV).

The first chemical synthesis of the phloroglucinol meroterpenoid cleistocaltone A (1) is presented. This compound, previously isolated from Cleistocalyx operculatus was reported to show promising antiviral properties. Based on a modified biosynthesis proposal, a synthetic strategy was devised featuring an intramolecular Diels-Alder reaction and an epoxidation/elimination sequence to generate the allyl alcohol handle in the side chain. The strategy was successfully executed and synthetic cleistcaltone A was evaluated against a contemporary RSV-A strain.

Formal (2+2) ring expansion prevails over (4+2) cycloaddition of a kinetically stabilized benzoborirene with reactive cycloaddends.

Benzoborirene carrying a bulky Trip2C6H3 (Trip = 2,4,6-tri-iso-Pr3C6H2) group at boron reacts with the dienophile 4-phenyl-1,2,4-triazoline-3,5-dione and the diene 3,6-di(4-pyridyl)-1,2,4,5-tetrazine by opening of the borirene ring rather than undergoing the typical Diels-Alder reactions. The formal insertion results in diazaborole and azaborolo[1,5-b][1,2,4,5]tetrazine derivatives, respectively.

A one-pot telescopic synthesis of benzo[b]carbazoles and exploration of their liquid crystalline properties.

We describe a diversity-oriented one-pot telescopic synthesis of various benzo[b]carbazoles with the naphthannulation of indoles as the key step, enabled by an intramolecular furan-olefin Diels-Alder reaction. This strategy is general and efficient across a wide range of substrates. We applied this method to synthesize and characterize the first benzo[b]carbazole-based liquid crystalline materials, where the unique molecular design led to the formation of a rare nematic phase at room temperature.

Furan and benzene ring formation in cellulose char: the roles of 5-HMF and reducing ends.

The authors previously proposed that 5-hydroxymethylfurfural (5-HMF) can be produced from the reducing ends of cellulose as a key intermediate during carbonization. The present work investigated the mechanisms by which furan and benzene rings are formed in cellulose char based on carbonization at 280 °C using 13C-labeled 5-HMF together with 13C-labeled glucose (as a model for the cellulose reducing ends). Glycerol was added to the 5-HMF to prevent the formation of stable glassy polymers. The resulting char was subjected to pyrolysis gas chromatography/mass spectrometry (764 °C, 5 s hold time) and the incorporation of 13C in furan-, phenol-, benzofuran- and benzene-type fragments was assessed. The apparent formation mechanisms include a direct rearrangement of the six carbons of 5-HMF to phenols, Diels-Alder reactions of furan rings with double bonds to give benzofurans and a more random process involving reactive fragments producing benzene rings. On the basis of these results, the roles of 5-HMF and reducing ends during cellulose carbonization are discussed herein.

Direct photochemical intramolecular [4 + 2] cycloadditions of dehydrosecodine-type substrates for the synthesis of the iboga-type scaffold and divergent [2 + 2] cycloadditions employing micro-flow system.

Photocyclisation reactions offer a convenient and versatile method for constructing complex polycyclic scaffolds, particularly in the synthesis of natural products. While the [2 + 2] photocycloaddition reaction is well-established and extensively reported, the [4 + 2] counterpart via direct photochemical means remains challenging and relatively unexplored. In this work, we devised the rapid assembly of the iboga-type scaffold through photochemical intramolecular Diels-Alder reaction using a common biomimetic dehydrosecodine-type intermediate having vinyl indole and dihydropyridine (DHP) sub-units. Exploiting a micro-flow system, the medicinally important iboga-type scaffold was obtained up to 77% yield under mild, neutral conditions at room temperature. This study demonstrated the site-selective activation of the DHP moiety by direct UV-LED irradiation, eliminating the need for external photocatalysts or photosensitisers and showing good tolerance to a wide range of stabilised dehydrosecodine-type substrates. By adjusting the spatial arrangement of the DHP ring and the vinyl indole group, this versatile photochemical approach efficiently facilitates both [4 + 2] and [2 + 2] cyclisations, assembling architecturally complex multicyclic scaffolds. Precise photoactivation of the DHP subunit, generating short-lived biradical species, enabled the new way of harnessing the hidden but innately pre-encoded reactivity of the polyunsaturated dehydrosecodine-type intermediate. These photo-mediated [4 + 2] cyclisation and divergent [2 + 2] cycloadditions are distinct from biosynthetic processes, which are mainly mediated through concerted thermal cycloadditions.

Substituent effects on the selectivity of ambimodal [6+4]/[4+2] cycloaddition.

In this work, we report a density functional theory (DFT) study and a dynamical trajectory study of substituent effects on the ambimodal [6+4]/[4+2] cycloaddition proposed for 1,3,5,10,12-cycloheptadecapentaene, referred to as cycloheptadecapentaene. The proposed cycloaddition proceeds through an ambimodal transition state, which results in both a [6+4] adduct a [4+2] adduct directly. The [6+4] adduct can be readily converted to the [4+2] adduct via a Cope rearrangement. We study the selectivity of the reaction with regard to the position of substituents, steric effects of substituents, and electronic effects of substituents. In the dynamical trajectory study, we find that nitro-substituted reactants lead to a new product from the ambimodal transition state via the hetero Diels-Alder reaction, and this new product can then be converted to a [4+2] adduct by a hetero [3, 3]-sigmatropic rearrangement. These results may provide insights for designing more bridged heterocyclic compounds.

Is aromaticity loss necessary for transition-metal promoted arene-alkene cycloadditions?

Computed gas-phase reaction profiles for Diels-Alder reactions, nucleus-independent chemical shifts, and bonding analyses for substituted and metal complexed, η2-, η4-, η6-coordinated arenes reveal that dearomatization is necessary for arenes to exhibit ene- and diene-like reactivity. Substituted arenes and η6-arenes exhibit high free energy barriers towards cycloaddition reactions, but strongly dearomatized η2- and η4-arenes can display low free energy barriers (∼20 kcal mol-1 or less) for [4 + 2] cycloaddition reactions.

Unveiling the reactivity of 2H-(thio)pyran-2-(thi)ones in cycloaddition reactions with strained alkynes through density functional theory studies.

Over the past two decades, click chemistry transformations have revolutionized chemical and biological sciences. Among the different strain-promoted cycloadditions, the inverse electron demand Diels-Alder reaction (IEDDA) has been established as a benchmark reaction. We have theoretically investigated the IEDDA reaction of endo-bicyclo[6.1.0]nonyne (endo-BCN) with 2H-pyran-2-one, 2H-thiopyran-2-one, 2H-pyran-2-thione and 2H-thiopyran-2-thione. These 2H-(thio)pyran-2-(thi)ones have displayed different reactivity towards endo-BCN. Density functional theory (DFT) calculations show, in agreement with experiments, that endo-BCN reacts significantly faster with 2H-thiopyran-2-one compared to other 2H-(thio)pyran-2-(thi)one derivatives because of the lower distortion energy. Experimentally determined second-order rate constants for the reaction of a 2H-pyran-2-thione with different strained derivatives, including a 1-methylcyclopropene derivative and several cycloalkynes (exo-BCN, (1R,8S)-bicyclo[6.1.0]non-4-yne-9,9-diyl)dimethanol, dibenzocycylooctyne and a light activatable silacycloheptyne, were used to validate the computational investigations and shed light on this reaction.

Asymmetric synthesis of penostatins A-D from L-ascorbic acid.

The first asymmetric synthesis of (-)-penostatins B and D and the practical synthesis of (+)-penostatins A and C have been accomplished through a flexible strategy. The features of the synthesis are a BF3·OEt2-mediated Diels-Alder reaction of chiral dienophiles and methylcyclopentadienes with high chemo-, regio-, and stereoselectivity, followed by ozonolysis to install the common trisubstituted cyclopentane intermediate, and a hetero-Diels-Alder reaction with easily tunable facial selectivity, followed by sulfonate elimination to construct both enantiomeric tricyclic systems for penostatins A/C and B/D, respectively.

Asymmetric total syntheses of sarglamides A, C, D, E, and F.

Sarglamides A-E were identified as a structurally new class of alkaloids with potential application for inflammation-associated diseases. Reported is the first asymmetric total synthesis of sarglamides A, C, D, E, and F within 7 steps, featuring an intermolecular Diels-Alder cycloaddition of (S)-phellandrene and 1,4-benzoquinone and intramolecular (aza-)Michael addition to construct the tetracyclic core of sarglamides. Importantly, our work demonstrated that the hypothetic Diels-Alder reaction of α-phellandrene with dienophile toussaintine C (or analogues) originally proposed as a biosynthetic pathway was not viable under non-enzymatic conditions. Additionally, we discovered novel and efficient double cyclization (cycloetherification and oxa-Michael cyclization) to construct the core framework of sarglamides E and D. Our concise synthetic strategy might allow rapid access to a library of sarglamide analogues for further evaluation of their bioactivity and mode of action.

Photo-induced synthesis of polymeric nanoparticles and chemiluminescent degradable materials via flow chemistry.

We report the photo-induced, additive-free, continuous synthesis of polymeric particles using flow chemistry. Not only can these particles be formed under ambient conditions in a solely light-induced precipitation polymerisation, they can be prepared via continuous flow techniques to up-scale the synthetic process. We carefully assess the flow chemical parameters and analyse the resulting particles quantitatively using scanning electron microscopy (SEM). Particle formation is a direct result of the step-growth polymerisation via a photochemically induced AA + BB Diels-Alder reaction, which we herein base on the dialdehyde monomer (AA) derived from the sustainable precursor, thymol. By employing a peroxyoxalate bismaleimide (BB), we introduce particles that can be selectively degraded on-demand, self-reported by light emission through chemiluminescence.

Contribution of Dispersion to the Intrinsic Energy Barriers of Neutral Model Diels-Alder Reactions

The intrinsic reaction coordinates for the cycloadditions between ethene and 1,3-butadiene, and ethene and cyclopentadiene, were determined at the SCS-MP2/aug-cc-pVTZ level of theory. The energy contents of the points determined for both coordinates were decomposed into their deformation and interaction contributions. From this analysis it is concluded that the higher reaction barrier for the butadiene-ethene cycloaddition can be attributed primarily to the conformational change of butadiene required by the reaction (higher deformation energy). There is also a minor contribution of the interaction term, which is more stabilizing for the cyclopentadiene-ethene reaction. An additional decomposition of these terms into their Hartree-Fock and SCS-MP2 correlation components suggests that the higher stabilization of the transition state of the cyclopentadiene-ethene cycloaddition is mostly due to stronger dispersion interactions between reactants, resulting from the larger contact surface between them, and not to stabilizing electronic effects. Resumen. Se determinaron las coordenadas intrínsecas de reacción para las cicloadiciones entre eteno y 1,3-butadieno, y eteno y ciclopentadieno al nivel de teoría SCS-MP2/aug-cc-pVTZ. La energía de los puntos obtenidos en ambas coordenadas se descompuso en sus contribuciones de deformación e interacción. A partir de este análisis se concluye que la mayor barrera energética para la cicloadición eteno-butadieno puede atribuirse, principalmente, al cambio conformacional del butadieno requerido por la reacción (mayor energía de deformación). También se encuentra que el término de interacción es más estabilizante para la reacción entre ciclopentadieno y eteno, aunque la contribución de este término es menor. La descomposición adicional de las energías de interacción de estas reacciones en sus componentes de Hartree-Fock y de correlación SCS-MP2, sugiere que la mayor estabilización del estado de transición en la reacción entre ciclopentadieno y eteno, se debe principalmente a la interacción de dispersión más fuertemente estabilizante entre estos reactantes, resultado de la mayor superficie de contacto entre ellos y no a efectos electrónicos estabilizantes.

Recyclable polytriazole resins with high performance based on Diels-Alder dynamic covalent crosslinking

Abstract N,N-Di-2-propyn-1-yl-2-furanmethanamine (DPFA) was synthesized from 2-furanemethylamine and 3-chloropropyne. Then, furan-containing polytriazoles were made from DPFA and diazide compounds. The Diels-Alder (DA) reaction between 4,4′-bismaleimidodiphenylmethane and furan-containing polytriazoles was used to prepare recyclable polytriazole resins. The effects of the main chain structures on the reversible processes and mechanical properties of the resins were investigated. The results show that the flexibility of the chain structures could be regulated by introducing different contents of azide-terminated polyethylene glycol (PEG) in the polymerization process. The PEG segments could not only promote the degree of the DA reaction but also play a role in reinforcing and/or toughening the recyclable polytriazole resins. RFPTA-5 resin film displays a tensile strength of 107.2 MPa and RFPTA-20 resin film shows an elongation at break of 224.8%. Moreover, the resin films demonstrate high recyclability.

Heterodimers of Aromadendrane Sesquiterpenoid with Benzoquinone from the Chinese Liverwort Mylia nuda.

Mylnudones A-G (1-7), unprecedented 1,10-seco-aromadendrane-benzoquinone-type heterodimers, and a highly rearranged aromadendrane-type sesquiterpenoid (8), along with four known analogs (9-12), were isolated from the liverwort Mylia nuda. Compounds 1-6 and 7, bearing tricyclo[6.2.1.02,7] undecane and tricyclo[5.3.1.02,6] undecane backbones, likely formed via a Diels-Alder reaction and radical cyclization, respectively. Their structures were determined by spectroscopic analysis, computational calculation, and single-crystal X-ray diffraction analysis. Dimeric compounds displayed cytoprotective effects against glutamic acid-induced neurological deficits.

Production of light olefins and monocyclic aromatic hydrocarbons from the pyrolysis of waste plastic straws over high-silica zeolite-based catalysts

Owing to the ever-increasing generation of plastic waste, the need to develop environmentally friendly disposal methods has increased. This study explored the potential of waste plastic straw to generate valuable light olefins and monocyclic aromatic hydrocarbons (MAHs) via catalytic pyrolysis using high-silica zeolite-based catalysts. HZSM-5 (SiO2/Al2O3:200) exhibited superior performance, yielding more light olefins (49.8 wt%) and a higher MAH content than Hbeta (300). This was attributed to the increased acidity and proper shape selectivity. HZSM-5 displayed better coking resistance (0.7 wt%) than Hbeta (4.4 wt%) by impeding secondary reactions, limiting coke precursor formation. The use of HZSM-5 (80) resulted in higher MAHs and lower light olefins than HZSM-5 (200) because of its higher acidity. Incorporation of Co into HZSM-5 (200) marginally lowered light olefin yield (to 44.0 wt%) while notably enhancing MAH production and boosting propene selectivity within the olefin composition. These observations are attributed to the well-balanced coexistence of Lewis and Brønsted acid sites, which stimulated the carbonium ion mechanism and induced H-transfer, cyclization, Diels-alder, and dehydrogenation reactions. The catalytic pyrolysis of plastic straw over high-silica and metal-loaded HZSM-5 catalysts has been suggested as an efficient and sustainable method for transforming plastic waste materials into valuable light olefins and MAHs.