Retrieve Cloud Microphysical Properties Research Articles

A Method for Retrieving Cloud Microphysical Properties Using Combined Measurement of Millimeter-Wave Radar and Lidar

Clouds are an important component of weather systems and are difficult to effectively characterize using current climate models and estimation of radiative forcing. Due to the limitations in observational capabilities, it remains difficult to obtain high-spatiotemporal-resolution, continuous, and accurate observations of clouds. To overcome this issue, we propose a novel and practical combined retrieval method using millimeter-wave radar and lidar, which enables the microphysical properties of thin liquid water clouds, such as cloud droplet effective radius, number concentration, and liquid water content, to be retrieved. This method was utilized to analyze the clouds observed at the Shanghai World Expo Park and was validated through synchronous observations with a microwave radiometer. Furthermore, the most suitable extinction backscatter ratio was determined through sensitivity analysis. This study provides vertical distributions of cloud microphysical properties with a time resolution of 1 min and a spatial resolution of 30 m, demonstrating the scientific potential of this combined retrieval method.

Microphysical Properties of Convective Clouds in Summer over the Tibetan Plateau from SNPP/VIIRS Satellite Data

The Tibetan Plateau (TP) plays an important role in formation and development of the East Asian atmospheric circulation, climate variability, and disastrous weathers in China. Among the many topics on TP meteorology, it is critical to understand the microphysical characteristics of clouds over the TP; however, observations of the cloud micro-physics in this area are insufficient mainly due to sparse stations and limited cloud physical data. The Visible Infrared Imaging Radiometer Suite (VIIRS), onboard the Suomi National Polar-orbiting Partnership (SNPP) satellite, has an improved imaging spectroradiometer with 17 channels of 750-m moderate resolution and 5 channels of 375-m image resolution. The high-resolution instrument has an advantage for observing the small or initial convective clouds. Based on the methodologies that we proposed before for retrieving cloud microphysical properties from SNPP, an automated mapping software package named Automatic Mapping of Convective Clouds (AMCC) has been developed at the scale of satellite swath. The properties of convective clouds are retrieved by AMCC and their values are averaged over 0.33° × 0.33° grids based on the SNPP/VIIRS satellite data over the TP during the summers of 2013–17. The results show that: (1) the temperature of lifting condensation level (TLCL) at Naqu meteorological station and the cloud base temperature (Tb) retrieved from VIIRS are linearly correlated, with a correlation coefficient of 0.87 and standard deviation (STD) of 3.0°C; (2) convective clouds over the TP have the following macro- and micro-physical properties. First, the cloud base temperature (Tb) is about −5°C, the cloud base height above the ground (Hb) ranges between 1800 and 2200 m, and the cloud water content is low. Second, the cloud condensation nuclei concentration (NCCN) is between 200 and 400 mg−1 with 0.7% in maximum supersaturation (Smax); consequently, the condensation growth of water cloud droplet with less NCCN and higher Smax is fast. Third, because the precipitation initiation depth (D14) varies within 1500–2000 m and 500–1000 m at the Yarlung Zangbo River basin and southern Tibet, respectively, the clouds over these areas are more prone to precipitation. Fourth, mean height of the cloud top above sea level (Htop) is between 10 and 13 km, but the cloud depth (Dcld) is rather small, which is about 5000 m in southern TP and gradually reduces to 2500 m in northern TP. Fifth, the glaciation temperature (Tg) ranges from −30°C in central and southern TP to −25°C in northern TP, which, combined with the warmer Tg and the Tb less than 0°C, leads to the domination of ice process in the clouds; (3) the macro- and microphysical properties of convective clouds over the TP explain why rainfall there is frequent and lasts over a short time with small amount and large rain drops.

Comparisons of bispectral and polarimetric retrievals of marine boundary layer cloud microphysics: case studies using a LES–satellite retrieval simulator

Abstract. Many passive remote-sensing techniques have been developed to retrieve cloud microphysical properties from satellite-based sensors, with the most common approaches being the bispectral and polarimetric techniques. These two vastly different retrieval techniques have been implemented for a variety of polar-orbiting and geostationary satellite platforms, providing global climatological data sets. Prior instrument comparison studies have shown that there are systematic differences between the droplet size retrieval products (effective radius) of bispectral (e.g., MODIS, Moderate Resolution Imaging Spectroradiometer) and polarimetric (e.g., POLDER, Polarization and Directionality of Earth's Reflectances) instruments. However, intercomparisons of airborne bispectral and polarimetric instruments have yielded results that do not appear to be systematically biased relative to one another. Diagnosing this discrepancy is complicated, because it is often difficult for instrument intercomparison studies to isolate differences between retrieval technique sensitivities and specific instrumental differences such as calibration and atmospheric correction. In addition to these technical differences the polarimetric retrieval is also sensitive to the dispersion of the droplet size distribution (effective variance), which could influence the interpretation of the droplet size retrieval. To avoid these instrument-dependent complications, this study makes use of a cloud remote-sensing retrieval simulator. Created by coupling a large-eddy simulation (LES) cloud model with a 1-D radiative transfer model, the simulator serves as a test bed for understanding differences between bispectral and polarimetric retrievals. With the help of this simulator we can not only compare the two techniques to one another (retrieval intercomparison) but also validate retrievals directly against the LES cloud properties. Using the satellite retrieval simulator, we are able to verify that at high spatial resolution (50 m) the bispectral and polarimetric retrievals are highly correlated with one another within expected observational uncertainties. The relatively small systematic biases at high spatial resolution can be attributed to different sensitivity limitations of the two retrievals. In contrast, a systematic difference between the two retrievals emerges at coarser resolution. This bias largely stems from differences related to sensitivity of the two retrievals to unresolved inhomogeneities in effective variance and optical thickness. The influence of coarse angular resolution is found to increase uncertainty in the polarimetric retrieval but generally maintains a constant mean value.

Cloud vertical distribution from combined surface and space radar–lidar observations at two Arctic atmospheric observatories

Abstract. Detailed and accurate vertical distributions of cloud properties (such as cloud fraction, cloud phase, and cloud water content) and their changes are essential to accurately calculate the surface radiative flux and to depict the mean climate state. Surface and space-based active sensors including radar and lidar are ideal to provide this information because of their superior capability to detect clouds and retrieve cloud microphysical properties. In this study, we compare the annual cycles of cloud property vertical distributions from space-based active sensors and surface-based active sensors at two Arctic atmospheric observatories, Barrow and Eureka. Based on the comparisons, we identify the sensors' respective strengths and limitations, and develop a blended cloud property vertical distribution by combining both sets of observations. Results show that surface-based observations offer a more complete cloud property vertical distribution from the surface up to 11 km above mean sea level (a.m.s.l.) with limitations in the middle and high altitudes; the annual mean total cloud fraction from space-based observations shows 25–40 % fewer clouds below 0.5 km than from surface-based observations, and space-based observations also show much fewer ice clouds and mixed-phase clouds, and slightly more liquid clouds, from the surface to 1 km. In general, space-based observations show comparable cloud fractions between 1 and 2 km a.m.s.l., and larger cloud fractions above 2 km a.m.s.l. than from surface-based observations. A blended product combines the strengths of both products to provide a more reliable annual cycle of cloud property vertical distributions from the surface to 11 km a.m.s.l. This information can be valuable for deriving an accurate surface radiative budget in the Arctic and for cloud parameterization evaluation in weather and climate models. Cloud annual cycles show similar evolutions in total cloud fraction and ice cloud fraction, and lower liquid-containing cloud fraction at Eureka than at Barrow; the differences can be attributed to the generally colder and drier conditions at Eureka relative to Barrow.

On Depolarization Lidar-Based Method for The Determination of Liquid-Cloud Microphysical Properties

Abstract : Under single scattering conditions, water droplets clouds do not depolarize the backscattered light. However, backscattered light from multiple scattering will be depolarized. The level of depolarization is a function of the droplets size, the cloud extinction coefficient value and profile; it has also an important dependency on the lidar field-of-view (FOV). The use of depolarization information to retrieve cloud microphysical properties, using Multiple-FOV has been the object of studies, [1], [2]. Recently the use of the depolarization, at a single FOV, has been studied for cloud with linear liquid water content profiles, [3], [4]. In this paper we present the mechanism leading to depolarization and identify the FOV values for which the information on particle size is high. Also Monte Carlo simulations for cloud with constant and ramp up profiles are presented. The degree of linear depolarization as a function of cloud penetration is significantly different for both cloud profiles. This suggests that the use of the degree of linear depolarization at a single FOV should be used with caution to determine clouds micro-physical parameters.

Dual-field-of-view Raman lidar measurements for the retrieval of cloud microphysical properties

Dual-field-of-view Raman lidar measurements, detecting Raman-scattered light with two fields of view simultaneously, are used for the first time to retrieve cloud microphysical properties. The measurements are performed with the Multiwavelength Atmospheric Raman Lidar for Temperature, Humidity, and Aerosol Profiling (MARTHA) at the Leibniz Institute for Tropospheric Research in Leipzig, Germany. Light that is scattered in forward direction by cloud droplets and inelastically backscattered by N2 molecules is detected. A forward iterative algorithm uses the measured signals to derive profiles of the effective cloud droplet radius, extinction coefficient, and liquid-water content of the investigated clouds. The setup, algorithm, error analysis, and a measurement example are presented. The obtained liquid-water path is validated by observations with a microwave radiometer. With the capability to retrieve aerosol properties as well as cloud microphysical properties, the Raman lidar MARTHA is an ideal tool for studies of the aerosol indirect effect.

Evaluation of AIRS cloud properties using MPACE data

Retrieval of cloud properties from the Atmospheric Infrared Sounder (AIRS) aboard the NASA Aqua satellite has been investigated. The cloud products from the collocated MODerate resolution Imaging Spectroradiometer (MODIS) data are used to characterize the AIRS sub‐pixel cloud information such as cloud phase, cloud coverage, and cloud layer information. A Minimum Residual (MR) approach is used to retrieve cloud microphysical properties once the cloud top pressure (CTP) and effective cloud amount (ECA) are determined from AIRS CO2 absorption channels between 720 and 790 cm−1. The cloud microphysical properties can be retrieved by minimizing the differences between the observations and the calculations using AIRS longwave window channels between 790 and 1130 cm−1. AIRS is used to derive cloud properties during the Mixed Phase Arctic Cloud Experiment (MPACE) field campaign. Comparison with measurements obtained from lidar data is made for a test day, showing that AIRS cloud property retrievals agree with in situ lidar observations. Due to the large solar zenith angle, the MODIS operational retrieval approach is not able to provide cloud microphysics north of Barrow, Alaska; however, AIRS provides cloud microphysical properties with its high spectral resolution IR measurements.

Cirrus cloud optical, microphysical, and radiative properties observed during the CRYSTAL‐FACE experiment: A lidar‐radar retrieval system

A method of retrieving cloud microphysical properties using combined observations from both cloud radar and lidar is introduced. The description of the lidar‐radar model accounts for nonspherical effects of the ice crystals, with a treatment for multiple scattering and Mie effects. This retrieval makes use of an improvement to the traditional optimal estimation retrieval method, whereby a series of corrections are applied to the state vector during the search for an iterative solution. This allows faster convergence to a solution and is less processor intensive. The retrieval method is applied to radar and lidar observations from the CRYSTAL‐FACE experiment, and vertical profiles of ice crystal characteristic diameter, number concentration, and ice water content are retrieved for a cirrus cloud layer observed 1 day of that experiment. Empirical relationships between ice water content and radar reflectivity as well as between particle number concentrations and characteristic diameter are also examined. The results indicate that a distinct and robust relationship exists between the latter two parameters, offering insight into the nature of cirrus microphysical processes.

Objective Determination of Cloud Heights and Radar Reflectivities Using a Combination of Active Remote Sensors at the ARM CART Sites

Abstract The U.S. Department of Energy’s Atmospheric Radiation Measurement (ARM) Program is deploying sensitive, millimeter-wave cloud radars at its Cloud and Radiation Test Bed (CART) sites in Oklahoma, Alaska, and the tropical western Pacific Ocean. The radars complement optical devices, including a Belfort or Vaisala laser ceilometer and a micropulse lidar, in providing a comprehensive source of information on the vertical distribution of hydrometeors overhead at the sites. An algorithm is described that combines data from these active remote sensors to produce an objective determination of hydrometeor height distributions and estimates of their radar reflectivities, vertical velocities, and Doppler spectral widths, which are optimized for accuracy. These data provide fundamental information for retrieving cloud microphysical properties and assessing the radiative effects of clouds on climate. The algorithm is applied to nine months of data from the CART site in Oklahoma for initial evaluation. Much of...

Retrieval of effective microphysical properties of clouds: A wave cloud case study

One of the important objectives of the SUbsonic aircraft: Contrail and Cloud Effecs Special Study (SUCCESS) field campaign data analysis is to investigate retrieving cloud microphysical properties using remote sensing observations. This paper presents the results of an infrared based retrieval of effective particle radius Re using brightness temperature observations near 8.5, 11 and 12µm. The retrieval method relies on comparing 8.5–11 and 11–12µm observed brightness temperature differences to theoretical simulations. During SUCCESS, conducted in April–May 1996 out of Salina KS, the MODIS Airborne Simulator (MAS) on the NASA ER‐2 made observations of contrails, cirrus and mountain lee wave clouds. Observations indicate that contrail and cirrus clouds are distinguishable by their radiative properties. Retrieval of Re for the lee wave cloud case on 2 May agrees with in situ observations from probes mounted on a NASA DC‐8 aircraft, validating the infrared retrieval. The addition of the 8.5µm information to the Re retrieval greatly enhances the sensitivity of the retrieval at small particle sizes (< 10µm)