Gas Chromatography-mass Spectrometry Results Research Articles

A Scientific Analysis of Decorative Metal Foil Used in Pouch for the Sutra Embroidered with a Sun and Moon Design Designated as National Folklore Cultural Heritage

Through scientific analysis, this study identified the material characteristics of metal foil decorating the border line and knotting of the National Folklore Cultural Heritage ‘Pouch for the Sutra Embroidered with a Sun and Moon Design’. Through Scanning Electron Microscope-Energy Dispersive Spectroscopy results, it was estimated that silver (Ag) and sulfur (S) were present in the metal foil, and silver leaf was also attached to the medium. S may discolor Ag from yellow to black depending on its concsentration and contact time. Yellow color could not be identified in metal foil at present. But there existed an example of the preparation of a gold-colored flat silver thread; therefore, further research is needed to estimate the original color. The lamella was reddish brown on the back. Aluminum, silicon, and iron were also detected and were the main components found in red soil. This is believed to be the red adhesive in traditional flat gold thread and is considered to be an adhesive-related component of the metal foil. From the gas chromatography mass spectrometry results, the adhesive component was confirmed to be animal glue.

Effect of Response Surface Methodology-Optimized Ultrasound-Assisted Pretreatment Extraction on the Composition of Essential Oil Released From Tribute citrus Peels.

The traditional hydrodistillation (HD) and ultrasound-assisted pretreatment extraction (UAPE) methods were proposed to obtain essential oil (EO) from Tribute citrus (TC) peels. The Box-Behnken design was employed to optimize the HD and UAPE procedures. Moreover, gas chromatography-mass spectrometry (GC-MS) and electronic nose (E-nose) were applied to identify the discrepancy of the extraction methods. The yield of EO extracted by UAPE (114.02 mg/g) was significantly higher than that by HD (85.67 mg/g) (p < 0.01) undergoing 40 min short time-consuming UPAE. A total of 28 compounds were extracted from the TC peels as terpenes were the predominant components. d-Limonene was the most vital compound in the T. citrus essential oil (TCEO), accounting for 86.38% of the total volatile concentration in HD and 86.75% in UAPE, respectively, followed by α-pinene, sabinene, γ-myrcene, and β-phellandrene. The chart of radar and graphic of the principal component analysis by E-nose displayed no significance, which was similar to the GC-MS results. This study demonstrated that UAPE is an efficient and short time-consuming method for TCEO extraction, which provides a promising method for the separation of EO from aromatic plant materials.

Nitrogen recovery from a palladium leachate via membrane distillation: System performance and ammonium chloride crystallization

Ammonia leaching process was often used to separate precious and rare-earth metals during their recovery via hydrometallurgy, resulting in the generation of nitrogen-rich leachate. Therefore, it is significantly important to recover the nitrogen from the leachate for reuse. In this work, we explored the treatment of palladium leachate (PL) via direct contact membrane distillation (DCMD) for nitrogen recovery. Effects of temperature and pH on system performance and nitrogen recovery mainly in the form of ammonium chloride (NH4Cl) were evaluated. Results showed that DCMD performance decline caused by membrane scaling was primarily impacted by feed temperature rather than pH. The higher temperature, the more severe membrane scaling occurrence. However, there was little to no effect of initial pH on distillate flux decline. Nitrogen in the form of NH4Cl was successfully recovered from PL, which was significantly influenced by initial pH. The weight of NH4Cl obtained ranged from 17.4 to 21.5 g/L under various operating conditions, and the purity of the NH4Cl was up to 97.4%, near the industrial grade, at feed temperature of 40°C and initial pH of 8.5. Additionally, results of gas chromatography-mass spectrometry (GC–MS) revealed that the primary dissolved organic matter (DOM) in the virgin PL were tetradecanoic acid and isosorbide. Our results suggest that DCMD can be used as a promising and feasible solution for nitrogen recovery from the PL.

Metal removal capability of two cyanobacterial species in autotrophic and mixotrophic mode of nutrition

BackgroundCyanobacteria are ecologically significant prokaryotes that can be found in heavy metals contaminated environments. As their photosynthetic machinery imposes high demands for metals, homeostasis of these micronutrients has been extensively considered in cyanobacteria. Recently, most studies have been focused on different habitats using microalgae leads to a remarkable reduction of an array of organic and inorganic nutrients, but what takes place in the extracellular environment when cells are exposed to external supplementation with heavy metals remains largely unknown.MethodsHere, extracellular polymeric substances (EPS) production in strains Nostoc sp. N27P72 and Nostoc sp. FB71 was isolated from different habitats and thenthe results were compared and reported.ResultCultures of both strains, supplemented separately with either glucose, sucrose, lactose, or maltose showed that production of EPS and cell dry weight were boosted by maltose supplementation. The production of EPS (9.1 ± 0.05 μg/ml) and increase in cell dry weight (1.01 ± 0.06 g/l) were comparatively high in Nostoc sp. N27P72 which was isolated from lime stones.The cultures were evaluated for their ability to remove Cu (II), Cr (III), and Ni (II) in culture media with and without maltose. The crude EPS showed metal adsorption capacity assuming the order Ni (II) > Cu (II) > Cr (III) from the metal-binding experiments.Nickel was preferentially biosorbed with a maximal uptake of 188.8 ± 0.14 mg (g cell dry wt) −1 crude EPS. We found that using maltose as a carbon source can increase the production of EPS, protein, and carbohydrates content and it could be a significant reason for the high ability of metal absorbance. FT-IR spectroscopy revealed that the treatment with Ni can change the functional groups and glycoside linkages in both strains. Results of Gas Chromatography-Mass Spectrometry (GC–MS) were used to determine the biochemical composition of Nostoc sp. N27P72, showed that strong Ni (II) removal capability could be associated with the high silicon containing heterocyclic compound and aromatic diacid compounds content.ConclusionThe results of this studyindicatede that strains Nostoc sp. N27P72 can be a good candidate for the commercial production of EPS and might be utilized in bioremediation field as an alternative to synthetic and abiotic flocculants.

Quantification of Bioactive Compounds in Piper Betle Leaf Extract by Gas Chromatography-Mass Spectrometry (GC-MS)

Piper betleis a Piperaceae family scented perennial creeper. The leaves are high in phenol, a compound with anti-tumor, anti-mutagenic, and immunomodulatory activities. This study aims to evaluate the bioactive compound in Piper betle leaves extract using Gas Chromatography Mass Spectrometry (GC-MS). Over 100 compounds were found in the GC-MS results, with 19 of them having a probability of greater than 30. The compound phentermine shows the highest peak at a retention time of 9.346 minutes, followed by Hexadecanoic acid, Tetradecanoic acid, Eugenol, Dodecanoic acid. Hexadecanoic acid shows the highest area% about 26.665%, indicating the highest composition of hexadecanoic acid in the betel leaf extract. The result revealed that the compound in betel leaf extract possesses medicinal properties.

Enhanced degradation of organic contaminants by Fe(III)/peroxymonosulfate process with l-cysteine

The difficulty in Fe(III)/Fe(II) conversion in the Fe(III)/peroxymonosulfate (PMS) process limits its efficiency and application. Herein, l-cysteine (Cys), a green natural organic ligand with reducing capability, was innovatively introduced into Fe(III)/PMS to construct an excellent Cys/Fe(III)/PMS process. The Cys/Fe(III)/PMS process, at room temperature, can degrade a variety of organic contaminants, including dyes, phenolic compounds, and pharmaceuticals. In subsequent experiments with acid orange 7 (AO7), the AO7 degradation efficiency followed pseudo-first-order kinetic which exhibited an initial “fast stage” and a second “slow stage”. The rate constant values ranged depending on the initial Cys, Fe(III), PMS, and AO7 concentrations, reaction temperature, and pH values. In addition, the presence of Cl−, NO3−, and SO42− had negligible impact while HCO3− and humic acid inhibited the degradation of AO7. Furthermore, radical scavenger experiments and methyl phenyl sulfoxide (PMSO) transformation assay indicated that sulfate radical, hydroxyl radical, and ferryl ion (Fe(IV)) were the dominant reactive species involved in the Cys/Fe(III)/PMS process. Finally, based on the results of gas chromatography-mass spectrometry, several AO7 degradation pathways, including N=N cleavage, hydroxylation, and ring opening were proposed. This study provided a new insight to improve the efficiency of Fe(III)/PMS process by accelerating Fe(III)/Fe(II) cycle with Cys.

Banana Tree Infected with Banana Bunchy Top Virus Attracts Pentalonia nigronervosa Aphids Through Increased Volatile Organic Compounds Emission.

Banana plants are affected by various viral diseases, among which the most devastating is the "bunchy top", caused by the Banana bunchy top virus (BBTV) and transmitted by the aphid Pentalonia nigronervosa Coquerel. The effect of BBTV on attraction mechanisms of dessert and plantain banana plants on the vector remains far from elucidated. For that, attractiveness tests were carried out using a two columns olfactometer for apterous aphids, and a flight cage experiment for alate aphids. Volatile Organic Compounds (VOCs) emitted by either healthy or BBTV-infected banana plants were identified using a dynamic extraction system and gas-chromatography mass-spectrometry (GC-MS) analysis. Behavioral results revealed a stronger attraction of aphids towards infected banana plants (independently from the variety), and towards the plantain variety (independently from the infection status). GC-MS results revealed that infected bananaplants produced VOCs of the same mixture as healthy bananaplants but in much higher quantities. In addition, VOCs produced by dessert and plantain banana plants were different in nature, and plantains produced higher quantities than dessert banana trees. This work opens interesting opportunities for biological control of P. nigronervosa, for example by luring away the aphid from banana plants through manipulation of olfactory cues.

Variation of Yield and Chemical Composition of Essential Oil from Cupressus lusitanica Growing in Different Agro-ecological Zones of Rwanda

Chemical composition and essential oil contents among essential oil-bearing plants are mostly influenced by different factors including ecological features of habitat. In this study, variation in yield and chemical composition of essential oils (EOs) from the leaves of Cupressus lusitanica Mill. (Cupressaceae) in different regions of Rwanda was investigated. Extraction of essential oils from fresh leaves of C. lusitanica collected in March 2021 and April, 2021 from three different ecological zones of Rwanda, Buberuka highland zone (Burera), Central plateau zone (Huye) and Eastern savannah zone (Kayonza) was realized through steam distillation. The chemical compositions of distilled EOs were analyzed using both Fourier transform infrared (FT-IR) spectroscopy and gas chromatography-mass spectrometry (GC-MS), while their yields were determined by simple calculus. The average yields of the EOs were 0.27 ± 0.02, 0.34 ± 0.02 and 0.39 ± 0.01% (v/w) for Burera, Huye and Kayonza, respectively. Results of FT-IR analysis were confirmed by those of GC-MS analysis, and indicated the presence of different groups of compounds including aliphatic alkanes, carboxylic acids, alkenes, aldehydes, aromatics and ketones in the EOs. GC-MS results revealed that sabinene (20.84%), myrcene (19.63%), α-pinene (10.23%) and δ-3-carene (10.13%) were the dominant chemical constituents for EOs of C. lusitanica from Burera. Umbellulone (24.21%), δ-3-carene (16.76%), sabinene (10.54%) and α-pinene (8.21%) were the main constituents for EOs of C. lusitanica from Huye, while γ-terpinene (18.77%), umbellulone (18.16%), isobornyl acetate (9.972%), and myrcene (7.20%) were the major components of EOs of C. lusitanica from Kayonza. The current results demonstrated an intraspecific variation in content and chemical profile of C. lusitanica EOs from one geographical region to another. The observed variations are mostly due to the interactions of C. lusitanica species with climatic and environmental conditions of ecological habitat. However, it could also be the effects of various biotic factors, as well as maturity of plant and stage of plant growth. Further studies are needed to establish the influence of different geo-climatic and environmental factors on each single major component of C. lusitanica EOs.

Mushroom waste biomass alters the yield, total phenolic content, antioxidant activity and essential oil composition of Tagetes patula L.

Champignon stalks are organic waste material widely underrated as a source of nutrients and substances with bio-stimulatory properties. French marigold (Tagetes patula L., Asteraceae) is an important crop plant that can be used in variety of different industries. This study assessed the usefulness of waste mushroom biomass - WMB (obtained in the production of champignon Agaricus bisporus), in the pot cultivation of two T. patula cultivars (‘Mikrus’ and ‘Petit Yellow’). It examined growth, plant biomass, photosynthetic pigments content, leaves and petals color and their antioxidant potential as well as the essential oil content and composition of plants grown in 100 % peat (control) and peat supplemented with WMB (5 % by volume). Postharvest physicochemical properties and nutrient status of the media were also investigated. The addition of WMB enriched the medium in nitrogen, potassium and sulfur (by 14−28 %, 106−160 % and 33−100 %, respectively), and reduced its C:N ratio without affecting its electrical conductivity and pH. The plants growing in peat supplemented with WMB had greater fresh weight (by 32−54 %) and number of flowers (by 35−46 %), higher total chlorophyll content in the leaves (by 73−117 %) and more intense color of leaves and petals than those growing in peat alone. Moreover, the leaves and petals had greater content of total polyphenols and higher antioxidant activity (determined by DPPH, ABTS and FRAP). The results of gas chromatography-mass spectrometry (GC–MS) analysis of essential oils revealed that the oils of leaves contained higher amounts of spathulenol (2.3−2.9 %), isopropyl myristate (2.6−13.3 %) and palmitic acid (20.7 %−22.7 %). Whereas, the oils of the petals showed higher concentration of caryophyllene (1.5−4.6 %), myristic acid (11.0−19.1 %) and 2,2′:5′2″-terthiophene (7.7−12.8 %). Interestingly, dodecanoic acid (2.7−3.8 %) was found only in the oils obtained from T. patula petals. Moreover, the slightly higher content of this compound was found in the plants growing in peat supplemented with WMB (3.8 % and 2.9 % for ‘Mikrus’ and ‘Petite Yellow’ cultivars, respectively). In conclusion, the present study suggests a new, environmental-friendly strategy to increase plant productivity and bioactive compounds content by using champignon stalks as a medium supplement.

Biosensor applications in contaminated estuaries: Implications for disaster research response

Background: Given the time and monetary costs associated with traditional analytical chemistry, there remains a need to rapidly characterize environmental samples for priority analysis, especially within disaster research response (DR2). As PAHs are both ubiquitous and occur as complex mixtures at many National Priority List sites, these compounds are of interest for post-disaster exposures. Objective: This study tests the field application of the KinExA Inline Biosensor in Galveston Bay and the Houston Ship Channel (GB/HSC) and in the Elizabeth River, characterizing the PAH profiles of these region's soils and sediments. To our knowledge, this is the first application of the biosensor to include soils. Methods: The biosensor enables calculation of total free PAHs in porewater (C free), which is confirmed through gas chromatography-mass spectrometry (GC-MS) analysis. To determine potential risk of the collected soils the United States Environmental Protection (USEPA) Agency's Regional Screening Level (RSL) Calculator is used along with the USEPA Region 4 Ecological Screening Values (R4-ESV) and Refined Screening Values (R4-RSV). Results: Based on GC-MS results, all samples had PAH-related hazard indices below 1, indicating low noncarcinogenic risks, but some samples exceeded screening levels for PAH-associated cancer risks. Combining biosensor-based C free with Total Organic Carbon yields predictions highly correlated (r > 0.5) both with total PAH concentrations as well as with hazard indices and cancer risks. Additionally, several individual parent PAH concentrations in both the GB/HSC and Elizabeth River sediments exceeded the R4- ESV and R4-RSV values, indicating a need for follow-up sediment studies. Conclusions: The resulting data support the utility of the biosensor for future DR2 efforts to characterize PAH contamination, enabling preliminary PAH exposure risk screening to aid in prioritization of environmental sample analysis.

Construction of Z-scheme CuFe2O4/MnO2 photocatalyst and activating peroxymonosulfate for phenol degradation: Synergistic effect, degradation pathways, and mechanism

Photocatalysis coupled with sulfate radical-based advanced oxidation process (SR-AOPs) is an efficient strategy to enhance the degradation efficiency of organic pollution. Herein, a Z-scheme CuFe2O4/MnO2 composite catalyst was successfully fabricated by the hydrothermal method. A series of characterizations demonstrated that the higher CuFe2O4 particle dispersion and larger BET surface area of CuFe2O4/MnO2 catalyst contributed to a high catalytic activity toward the phenol removal compared with pure CuFe2O4. The effects of catalyst concentration, pH, and peroxymonosulfate (PMS) concentration were studied according to the Box-Behnken Design (BBD) method. The results indicated that 100 mg/L 100 mL phenol could be degraded completely at 0.5 g/L CuFe2O4/MnO2 catalyst, pH = 4.8 and 0.5 mM PMS within 30 min. Moreover, the excellent reusability and stability of CuFe2O4/MnO2 were indicated by the results of recycling degradation and ion leaching test. The free radical quenching experiments and electron spin resonance (ESR) confirmed that h+, SO4•-, and •OH were the main reaction species for phenol oxidation. Based on the results of gas chromatography-mass spectrometry (GC-MS) and ion chromatography, the degradation pathway of phenol was proposed, and the toxicity of phenol degradation intermediates was evaluated. This work may provide new insights into the design of heterojunction photocatalysts for PMS activation to remove organic pollutants.

Simultaneous anaerobic decolorization/degradation of Reactive Black-5 azo dye and chromium(VI) removal by Bacillus cereus strain MS038EH followed by UV-C/H2O2 post-treatment for detoxification of biotransformed products.

The existence of synthetic dyes and heavy metals in textile wastewater is a serious problem. These compounds should be removed before discharge into the environment by an appropriate method. The present study was conducted for the characterization of efficient multi-functional strain Bacillus cereus MS038EH for the simultaneous removal of Reactive Black-5 and Chromium(VI). Maximum decolorization efficiency of 94.74% was achieved at pH 7, 35°C, and 4% inoculum size for 900mg/L of Reactive Black-5. Also, 94.10% efficiency was observed in the presence of 8g/L of yeast extract as an optimum nitrogen source, while carbon sources had no significant effect on decolorization. It should be pointed out that the decolorization efficiency was decreased from 94 to 64% by increasing NaCl concentrations from 0 to 50g/L, respectively. Bacillus cereus strain MS038EH could decolorize 94.31% of Reactive Black-5 (900mg/L) and remove 87.31% of chromium(VI) (30mg/L) within 36h. Results of Gas chromatography-mass spectrometry and Fourier transform-infrared spectroscopy proved that Reactive Black-5 was cleaved into the lower molecular weight products without any azo bonds. However, the phyto-toxicity analysis showed that Reactive Black-5 was not toxic for Triticum aestivum and Maize, while biologically treated Reactive Black-5 was toxic for seeds. Therefore, ultraviolet-C/H2O2 was applied for the detoxification of biotransformed products. When ultraviolet-C/H2O2 was applied as post-treatment, the seeds were germinated completely. It is demonstrated that the application of ultraviolet-C/H2O2 after anaerobic treatment is effective for toxicity reduction of textile wastewater.

Profiling of volatile compounds with characteristic odors in Bambusa oldhamii shoots from Taiwan

This study focuses on volatile aromatic constituents extracted using solid-phase microextraction (SPME) from underground and aboveground Bambusa oldhamii shoots. Analysis was conducted using the extracts after heating at various temperatures and for various durations. Results of gas chromatography-mass spectrometry (GC-MS) revealed six SPME-extracted volatile aromatic compounds in underground B. oldhamii shoots and eleven in aboveground B. oldhamii shoots. Methyl salicylate with a characteristic mint aroma and methoxy-phenyl oxime that gives a smell of fresh shrimp and crabs are the main volatile compounds found in underground and aboveground shoots of B. oldhamii, respectively. Moreover, the two types of shoots tested also contain volatile compounds including fatty acids: n-hexadecanoic acid (27.94%) and aliphatic aldehyde: trans-2-nonenal (16.31%), respectively. The GC-MS analysis of underground and aboveground B. oldhamii shoots steamed at 100 C for 60 min revealed n-hexadecanoic acid as the main fatty acid compound.

Studies on antibacterial and chemotaxis properties of Pseudomonas aeruginosa TEN01 biomass-derived sustainable biosurfactant

Biosurfactant producing bacterial strains were isolated from oil-contaminated sites at Chennai Petroleum Corporation Limited, Chennai, the potential strain was selected and identified as Pseudomonas aeruginosa TEN01 by 16 S rRNA sequencing technique. Biosurfactant was produced from cassava solid waste from the sago industry. Further, it was extracted by solvent extraction and partially purified by column chromatography. The partially purified biosurfactant was qualitatively analyzed by Thin Layer Chromatography (TLC), quantitatively analyzed by anthrone assay and characterized by Fourier Transform Infra-Red Spectroscopy (FT-IR) and Gas Chromatography-Mass Spectrometry (GC-MS). Rf value and chemical groups confirm the presence of glycolipid in the partially purified biosurfactant. GC-MS results confirmed the presence of long-chain fatty acids and carbohydrate which is found to be mainly present in glycolipids. Biosurfactants are surface-active molecules which have been found to be the best alternative to chemical-based surfactants. The present study focuses on modifying the cell surface using a biosurfactant from P. aeruginosa TEN01 to enhance membrane permeabilization. Antibacterial and chemotaxis properties of biosurfactant from P. aeruginosa TEN01 were found to be better towards Xenorhabdus poinarii, a bio-pesticide producing microbial strain, X. poinarii exhibited 81.7% adhesion to hydrocarbons upon biosurfactant treatment as analyzed by Bacterial Adhesion to Hydrocarbon (BATH) assay. The alteration in the membrane permeability was tested in X. poinarii using biosurfactant and chemical surfactants viz. Sodium dodecyl sulfate (SDS) and toluene by estimating the amount of intracellular protein released. High protein recovery (51.55%) was achieved with a biosurfactant. Cell viability in the biosurfactant-treated cells was also high (93.98%) in comparison to cells treated with chemical surfactants. Increased recovery of intracellular protein along with high cell viability makes the biosurfactant a potential candidate for application in numerous environmental fields.

Antibacterial and antioxidant potential of GC-MS analysis of crude ethyl acetate extract from the tropical mangrove plant Avicennia officinalis L.

Avicennia officinalis L. is an important mangrove plant used in traditional medicine to treat various diseases like asthma, dyspepsia, paralysis, tumor and rheumatism in aboriginal peoples in Andaman and Nicobar Islands (ANI). The study analyzed and separated bioactive speciation of ethyl acetate leaves extract of A. officinalis from tropical mangrove plants by Gas Chromatography-Mass Spectrometry (GC-MS) and further antimicrobial and antioxidant potential assay. GC-MS results of A. officinalis identified eight different bioactive compounds namely Trans-cinnamic acid, 2,4-Di-tert-butyl phenol, Phenol, 3-(2-phenylethyl, n-hexadecanoic acid, Dibutyl phthalate, Phytol, β – Sitosterol, Androst-7-ene-6, 17-dione and 2,3,14-trihydroxy. The natural products present in A. officinalis showed strong antibacterial activity against different bacteria like gram-positive strain: Streptococcus mutans (19 mm maximum zone of inhibition), Bacillus subtilis (17 mm), Pseudomonas aeruginosa (16 mm), and gram-negative: Klebsiella pneumonia (22 mm) and Enterobacter aerohenes (14 mm). Further, this crude extract showed good antioxidant activity with IC50 values of 23.60±0.43 µg/ml measured using the DPPH method. Thus, the study put forth the promising role of ethyl acetate leaves extract of A. officinalis in the formulation of therapeutic drugs against bacterial infections, antioxidants and cancer.

Decolorization mechanism, identification of an FMN-dependent NADH-azoreductase from a moderately halotolerant Staphylococcus sp. MEH038S, and toxicity assessment of biotransformed metabolites.

The application of halotolerant microorganisms capable of decolorizing is attractive. Decolorization mechanism, the effect of different parameters on the decolorization percentage, and toxicity analysis of Reactive Black 5 before and after decolorization were investigated in the present study. The decolorization percentage for live cells of Staphylococcus sp. strain MEH038S was more than dead cells, which demonstrated that Reactive Black 5 was decolorized through the degradation process. The results confirmed that an FMN-dependent NADH-azoreductase gene was responsible for the decolorization and then was identified as Staphylococcus sp. EFS01 azoreductase from a moderately halotolerant Staphylococcus strain for the first time. The maximal decolorization of 98.15% was observed at pH 6.5 and 35 ° C for 50mg/L of Reactive Black 5. In addition, more than 90% decolorization was achieved with 5-40g/L of NaCl. The results of Gas chromatography-mass spectrometry and Fourier transform infrared spectroscopy showed that Reactive Black 5 was broken to the lower molecular weight compounds without any chromophoric azo groups. Phytotoxicity and fish toxicity proved that the biotransformed metabolites of Reactive Black 5degradation were more toxic than the original dye. The moderate halotolerant strain exhibited a remarkable decolorization capability and can be applied for textile wastewater treatment. PRACTITIONER POINTS: An azoreductase gene from a moderately halotolerant Staphylococcus was identified. More than 90% decolorization efficiency was observed under high-salt conditions. Biotransformed metabolites of RB5degradation were identified. Toxicity analysis of biotransformed metabolites was investigated.

Attainment and characterization of a microbial consortium that efficiently degrades biphenyl and related substances

Persistent organic pollutants (POPs) mainly including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and organochlorine pesticides (OPs), have long-term harmful effects on human health and the environment. In this study, a natural consortium BP-W was attained from oil-contaminated soil using biphenyl as the sole carbon source, which is a relatively simple PAH and can form PCBs under certain catalytic conditions. PCR-DGGE techniques were used to analyze the structure of the consortium BP-W. The results showed that this consortium was composed of Chryseobacterium BP-1, Pseudomonas putida BP-2, Stenotrophomonas BP-3, Achromobacter BP-4, and an uncultured bacterium. The consortium BP-W degraded 99.88 % of 1 g L−1 biphenyl in 72 h. The degradation ratios of 100 mg L−1 naphthalene, phenanthrene, pyrene, and PCB77 in 5 days were 100 %, 97.54 %, 42.26 %, and 26.73 %, respectively. Notably, the consortium BP-W exhibited a high tolerance for these POPs. In the binary-substrate and ternary-substrate systems, the consortium BP-W was still able to rapidly degrade organic substrates. The results of gas chromatography-mass spectrometry showed that biphenyl was completely degraded by BP-W and entered the TCA cycle through the protocatechuic acid pathway, and no other highly toxic metabolites were produced during the degradation process. Thus, this consortium BP-W may have potential utility for the environmental-friendly and cost-effective bioremediation of POPs.

GC-MS Analysis and Evaluation of Antibacterial and Antifungal Activity of Essential Oils Extracted From Fruit Peel of Citrus aurantium L. (Rutaceae) Grown in the West Anatolian Area

In this study, chemical composition and in vitro antibacterial and antifungal effects of essential oils extracted from fruit peel of Citrus aurantium L. grown in West Anatolian ecological conditions, were investigated. Antibacterial and antifungal activities were determined with the use of Minimum Inhibitory Concentration (MIC) method. Essential oils were obtained in a clevenger apparatus and their compositions were analysed by Gas Chromatography-Mass Spectrometry (GC-MS). According to the GC-MS results, dl-limonene (72.51%) and hexasiloxane (13.28%) were the major components in the essential oil obtained from C. aurantium Central population. Limonene (77.27%) and hexasiloxane (6.19%) dominated in the samples originated from Germencik region. Limonene (79.77%) was found to be in the highest concentration in the essential oil obtained from C. aurantium Kocarli population. Limonene (95.70%) followed by β‑myrcene (0.76%) were the major components of the essential oil obtained from Citrus aurantium Nazilli population. MIC values ranged from 2.5 to 5 µL/mL for gram (−) bacteria and from 0.3125 to 5 µL/mL for gram (+) bacteria. Essential oil from Germencik region generally showed the best effect against fungi. Essential oil obtained from Citrus aurantium fruit peel could be an alternative to synthetic antimicrobial agents.

Anti-inflammatory potential of dichloromethane leaf extracts of Eucalyptus globulus (Labill) and Senna didymobotrya (Fresenius) in mice

Inflammation is an immune response characterized by swelling, redness, pain and heat. Inflammation is mainly managed using conventional medicines that are associated with many side effects. Plant-based remedies are considerably better alternative therapies for they have fewer side effects. This study aimed at determining the anti-inflammatory potential of dichloromethane (DCM) leaf extracts of Eucalyptus globulus and Senna didymobotrya in mice. Fresh leaves of these plants were harvested from Embu County, Kenya. Quantitative phytochemical analysis was done using Gas Chromatography-Mass Spectrometry (GC-MS). Anti-inflammatory test comprised nine groups of five animals each: normal, negative, positive controls and 6 experimental groups. Inflammation was induced with Carrageenan. One hour post-treatment, the different groups were intraperitoneally administered with the reference drug, diclofenac, 3% DMSO and six DCM leaf extracts at doses of 25, 50, 100, 150, 200 and 250mg/kgbw. GC-MS results revealed α-phellandrene, camphene, terpinolene, and limonene among others. Anti-inflammatory effects showed that extract doses of 100,150,200 and 250mg/kg bw significantly reduced the inflamed paw. Doses of 200 and 250mg/kgbw in both plants were more potent and compared with diclofenac. E. globulus extract dose of 250mg kg bw reduced inflamed paw in the 1st, 2nd, 3rd and 4th hours, by 2.27,6.52,9.09 and 10.90% respectively while S.didymobotrya at similar dose ranges, inflamed paw reduced by 2.41, 5.43, 8.31 and 9.05% respectively. E. globulus and S. didymobotrya have potent anti-inflammatory activities, attributed to their constituent phytochemicals. This study confirms the traditional use of these plants in treating inflammation.

Heterogeneous Photo-Fenton Catalytic Degradation of Practical Pharmaceutical Wastewater by Modified Attapulgite Supported Multi-Metal Oxides

Chemical synthetic pharmaceutical wastewater has characteristics of high concentration, high toxicity and poor biodegradability, so it is difficult to directly biodegrade. We used acid modified attapulgite (ATP) supported Fe-Mn-Cu polymetallic oxide as catalyst for multi-phase Fenton-like ultraviolet photocatalytic oxidation (photo-Fenton) treatment with actual chemical synthetic pharmaceutical wastewater as the treatment object. The results showed that at the initial pH of 2.0, light distance of 20 cm, and catalyst dosage and hydrogen peroxide concentration of 10.0 g/L and 0.5 mol/L respectively, the COD removal rate of wastewater reached 65% and BOD5/COD increased to 0.387 when the reaction lasted for 180 min. The results of gas chromatography-mass spectrometry (GC-MS) indicated that Fenton-like reaction with Fe-Mn-Cu@ATP had good catalytic potential and significant synergistic effect, and could remove almost all heterocycle compounds well. 3D-EEM (3D electron microscope) fluorescence spectra showed that the fluorescence intensity decreased significantly during catalytic degradation, and the UV humus-like and fulvic acid were effectively removed. The degradation efficiency of the nanocomposite only decreased by 5.8% after repeated use for 6 cycles. It seems appropriate to use this process as a pre-treatment for actual pharmaceutical wastewater to facilitate further biological treatment.