Results Of Feasibility Test Research Articles

MERANCANG MATERIAL MENGAJAR BAHASA INGGRIS UNTUK BIMBINGAN DAN SISWA KONSELING DI UNIVERSITAS NEGERI MEDAN

The objectives of this study are (1) to know the English teaching materials taught in Guidance and Counselling at this time, (2) to know the skills needed by students in the Guidance and Counselling department in communication using English, (3) to know the English materials needed students to face the world of work. The type of data obtained in the preliminary study is qualitative data and the results of the needs analysis of students' profile. This data is obtained by using interview and questionnaires. The type of data that results in the development of the model is qualitative data, which is the result of the validation of a team of experts; The results of individual test , and small group tests. The effectiveness test data is quantitative data. The results of this study are: (1) Descriptions of the needs of English language teaching materials, (2) Skills needed by students in communication using English, (3) English language teaching materials and (4) Effectiveness test results with T-Tests indicating that teaching materials English based on English for Specific Purposess developed in this field of research, effective; and the feasibility test of teaching materials shows the test results of 82, the results of the language feasibility test 87, the results of the feasibility test presentation 78, and the results of the feasibility test of decorative elements 75. Keywords: ESP, Guidance and Counsel l ing, Material

Developing video for agriculture product processing course in the subject of garlic snack production

The study aims to 1) develop an instructional video of garlic snack production for Agriculture Product Processing course, 2) measure the feasibility of the video. This is a research & development (R & D) study using 4D models (Define, Design, Develop, and Disseminate). The feasibility test was performed by two material experts, one media expert, and 30 students of XI grade in State Vocational High School 1 Cangkringan. The data were collected using 4-point Likert scale questionnaires and analyzed descriptively. The video had a duration of 12 min 9 sec with mp4 format. This video consisted of a) an opening section delivered by the presenter containing the introduction about snack product, main ingredients, and the selection of packaging materials, b) a content section consisting equipment and ingredients preparation, production process, packaging process, and expired date determination, c) a closing section delivered by the presenter containing evaluation and conclusion. The video was uploaded to YouTube channel Boga UNY of https://youtu.be/s04y8VGoTak. The feasibility test results of the video according to the material experts, the media expert, and the students were respectively 94.60%, 98.96%, and 93.85%. It can be concluded that the video is very feasible to be used as a learning media.

EFFECT OF QUALITY SERVICE, PRICE AND STORE ATMOSPHERE ON CUSTOMER SATISFACTION (STUDY ON CANGKIR COFFEE SHOP IN SURABAYA)

This is study aimed to investigate the effect of service quality, price and store atmosphere on customer satisfaction. The research object was Cangkir Coffee in Surabaya. The population of this study were customer of cangkir Coffee Surabaya. The sampling technique was incidental sampling technique; thus the samples were 100 customers who were unintentionally met at Cangkir Coffee Surabaya. Moreover, the analysis technique for this research data applied multiple regression models.The result of classic assumption test that were obtained from normality, multicollinearity and heteroscedasticity indicated that all variables did not contravene the specified condition. While, the result of feasibility test, the regression model that was utilized in this study was feasible. As the result of multiple determination coefficient, the variables of sevice quality, price, and store atmosphere were about 58.8%, indicating the customer satisfaction variable. Furthemore, the partial test result found that the service quality, price and store atmosphere variables had significant and positive effects on customer satisfaction.

Development of mobile game base learning on buffer solution to improve student performance

This study aims to develop innovative learning media that is Mobile Learning and know the quality of media produced and know the feasibility of media to be used in learning on buffer solution. This research was conducted at 107 Senior High School Jakarta and 42 Senior High School Jakarta starting in January 2018 until May 2018. The research method used is Design-Based Research which includes 4 stages, namely: (1) needs analysis, (2) development of mobile learning media, (3) Feasibility and trial test. Mobile learning media that generates an app on Android-based smartphones (smartphone) called “ChemBuff” is 167 MB compatible on Android devices up to v.7.1 Nougat with features such as material, video and educational features about the solution buffer. Based on the feasibility test results and the small scale and large scale effectiveness tests, it can be concluded that the mobile learning media is feasible and effective. The result of the effectiveness test shows that there is a very significant difference between the pre-test and post-test value as well as an increase in the average learning outcomes of learners after using mobile learning media buffer solution. The resulting media test can improve student learning outcomes.

The making of metal coating props oriented chemical representation

The purpose of this research is to produce metal coating props that oriented to chemical representation and find out the results of validation and feasibility of the props that has been made. This research used research and development method with stages of analysis, design and development. Based on the results of this research, the product is obtained in the form of metal coating props with the characteristics of combining macroscopic, submicroscopic and symbolic representations with guidebooks and worksheets. Validation results indicate that the product is valid with the acquisition of the value of rcount on props of 0.93. The results of feasibility tests conducted on 3rd grade of 27 Senior High School Bandung showed that props are very feasible with the percentage of successive value of 97%. High validation and feasibility values are caused by props that have met the criteria as a good medium and in accordance with metal coating material. The impact, the resulting props can be used as a medium that can help students gain a complete understanding of the concept of metal coating.

MEDIA PEMBELAJARAN BERBASIS CAI (COMPUTER ASSITED INSTRUCTION) PADA MATA PELAJARAN PPKn SEKOLAH DASAR

Research Objectives This development develops CAI (Computer Assisted Instruction) -based learning products on Pancasila and Citizenship Education (PPKn) classes 1 and 2 of Primary Schools. The subject of discussion of the symbolic subject matter of the Republic of Indonesia and the values contained in the symbol of the state of the Republic of Indonesia. The research method used in the development of interactive multimedia is ADDIE (Analyze, Design, Development, Implementation, Evalution). The method includes 5 stages, namely: needs analysis; model design; model development; implementation; and evaluation. The product instruments used were the validation sheets of material experts, media experts, field experts and questionnaires. The results of the development research produced a product supporting PPKn learning with interactive multimedia in the classroom. The feasibility test results showed very decent results from media experts with a percentage of 83.33% and very feasible from material experts with a percentage of 86.67%, and from field experts it was considered very feasible to obtain a percentage of 87.50%. For the results of the testing of interactive multimedia development products, the results were very feasible and interesting for students from small group trials with a percentage of 88% and large group trials 92.44%. Based on the results of the feasibility test and trial of interactive multimedia products for PPKn subjects for grade 1 and grade 2 elementary school students are feasible to be used as learning media in the activities of teaching and learning in schools.

Aplikasi Simulasi Tes Toefl Berbasis Android di Fakultas Keguruan dan Ilmu Pendidikan Universitas Hamzanwadi

This study aims to develop and appropriateness discover of the Android-based TOEFL test simulation application at FKIP of Hamzanwadi University and discover the response of students to the Android-based TOEFL test simulation application at FKIP of Hamzanwadi University. This research is Research and Development with ADDIE development model. The results of this study are the Android-based TOEFL Test Simulation Application at FKIP of Hamzanwadi University, with the display in the form of a main menu page consisting of six navigation buttons: navigation structure material, listening material, reading material, tips and trick, simulation test, and developer profile. The results of the media expert feasibility test are based on two aspects of assessment, namely the software engineering aspect and the display aspect are in the very feasible category with a total percentage of eligibility of 91%. And the results of the feasibility test from material experts are based on two aspects of assessment, namely the aspect of material content and language & communication, which is in the feasible category with a total percentage of eligibility of 79%. Meanwhile, based on student responses tested to 30 students on the developed application is positive with a total percentage of 78%.

DEVELOPMENT LEARNING MEDIA BASED ON MACROMEDIA FLASH ON MATRIX MATERIAL

Mathematics is a compulsory subject at the secondary school level, especially on matrix material, sometimes students are still difficult to distinguish rows and columns. It is not easy to do multiplications on matrices. Learning media are expected to be a facility that supports learning. This study aims to develop learning tools based on Macromedia flash subject matter matrix class XI. In developing this learning media based on using Research and Development with the ADDIE model (Analysis, Design, Development, Implementation, and Evaluation). This research was conducted at Islamic Senior High School (MA) Muallimin Yogyakarta. The research instrument used was a questionnaire. The quantitative data analysis technique calculates the score of the developed learning media's feasibility test results. The results of research on the development of interactive learning media mathematics based on Macromedia flash subject matter matrix XI based on the quality of each indicator in terms of material experts in the excellent category with an average percentage score of 86.84%, in terms of media experts in the category are very feasible with a percentage score an average of 88.33%, and student responses in the exciting category with an average percentage score of 77.37. The learning media based on Macromedia flash subject matter matrix XI class material is very feasible in the learning process.

Implementing an intervention to improve decision making around referral and admission to intensive care: Results of feasibility testing in three NHS hospitals.

Rationale, aims, and objectivesDecisions about whether to refer or admit a patient to an intensive care unit (ICU) are clinically, organizationally, and ethically challenging. Many explicit and implicit factors influence these decisions, and there is substantial variability in how they are made, leading to concerns about access to appropriate treatment for critically ill patients. There is currently no guidance to support doctors making these decisions. We developed an intervention with the aim of supporting doctors to make more transparent, consistent, patient‐centred, and ethically justified decisions. This paper reports on the implementation of the intervention at three NHS hospitals in England and evaluates its feasibility in terms of usage, acceptability, and perceived impact on decision making.MethodsA mixed method study including quantitative assessment of usage and qualitative interviews.ResultsThere was moderate uptake of the framework (28.2% of referrals to ICU across all sites during the 3‐month study period). Organizational structure and culture affected implementation. Concerns about increased workload in the context of limited resources were obstacles to its use. Doctors who used it reported a positive impact on decision making, with better articulation and communication of reasons for decisions, and greater attention to patient wishes. The intervention made explicit the uncertainty inherent in these decisions, and this was sometimes challenging. The patient and family information leaflets were not used.ConclusionsWhile it is feasible to implement an intervention to improve decision making around referral and admission to ICU, embedding the intervention into existing organizational culture and practice would likely increase adoption. The doctor‐facing elements of the intervention were generally acceptable and were perceived as making ICU decision making more transparent and patient‐centred. While there remained difficulties in articulating the clinical reasoning behind some decisions, the intervention offers an important step towards establishing a more clinically and ethically sound approach to ICU admission.

Recent advances in porous piezoceramics applications

In this paper, recent advances in porous piezoceramics applications are considered. Technological aspects of large-scale manufacture and use of porous piezoceramics in HIFU, NDT and medical ultrasonic transducers are considered. Two recently appeared application fields of porous piezoceramics, namely HIFU medical transdusers based on ferroelecally hard porous focusing elements and piezoelectrically active membranes for reverse osmosis, ultra- and microfiltration processes are considered. Theoretical aspects of ferroelectrically hard porous ceramics application in HIFU transducers are presented. The original designs of HIFU transducers made from porous piezoelectric ceramics as well as manufacturing technology of porous focusing elements are described. Designs, as well as practical aspects of the use of nano- and microporous piezoceramic elements as piezoelectrically active membranes are considered. The results of feasibility test of experimental samples of composite piezoelectrically active membranes are discussed.

Konsepsi Penerapan Keterampilan Proses Sains (KPS) dan Sikap Ilmiah Dalam Desain Pengembangan Modul Panduan Eksperimen Ipa SD/MI

This research moved from the problem of the lack of availability of science books (modules) based on the development of science process skills (scienific process) and scientific attitude of students. Generally textbooks that are often used by teachers or students emphasize mastery of science concepts (scientific knowledge), while science process skills (scienific process) and what scientific attitudes to be developed are not clearly defined and detailed, so that the impact on activity and acquisition of student learning outcomes. Based on the description of the above problems, the purpose of this research and development is to produce a product in the form of an experimental module for science in elementary school that based on science process skills (scienific process) and scientific attitudes, expecially in term : Human Circulatory System. The model used refers to Borg and Gall. To assess the feasibility of the module, validation was carried out by experts (material experts, media experts, and linguists) and also involved education practitioners. To assess the attractiveness of the module a trial was conducted, which began with a small group and then in a large group. Furthermore, the process of data analysis uses quantitative and qualitative techniques. The research and development (R D) results are 1) The development step begins with analyzing potential and problems, collecting data / information, designing products, validating products, revising products, conducting product feasibility trials, and revising products again. 2) Based on the results of validation and feasibility tests, the development of the science module experiment for SD / MI based on science process skills (scienific process) and scientific attitudes in the term of the Human Circulatory System successfully meet the level of feasibility and attractiveness, therefore it can be used as teaching material in science learning in elementary school (SD/MI)

Pengembangan Alat Ukur Kecepatan Angin Berbasis Adobe Audition 1.5

Researchers have completed research on the development of wind speed measuring tools based on Adobe Audition 1.5 in innovation and implementation of scientific physics. The purpose of this research is to get a calibrated wind speed measuring instrument, valid, and have good feasibility. The method used was an experimental method, that is designing, making, calibration, and validation. The results reveal that the tool made is well calibrated. The calibration results indicates that the tools is very well, with a fault tolerance of 1.77%. Based on the result of feasibility test by two validators, it is obtained score of 100 which means the tool made is very feasible.

Information System of International Conference Management Based on Web

<p>Technological advances can be utilized to make information dissemination faster and more efficient. One example of the use of technology as a medium of information and management in the implementation of the conference is an information management system based on WEB. Based on the observations that have been conducted, found various problems, among others for the preparation of activity data reports, data participants, and so forth, actually already utilizing information technology, but still less effective. So many weaknesses that appear like; less effective and efficient in data processing, the time required for the preparation of reports long enough and the risk of error becomes large. Then from the side of presence also still printed manually. In addition, all the participants who register will be placed certificates, although the participants are not present in the conference, this happens because of the organizers difficult to sort out which participants are present and not present. In this article presented the feasibility test results of the conference management information system developed. Testing is performed on system experts, substance experts, and users. Expert testing system using the instrument referring to ISO 9126 get 93% percentage. Expert testing of substance using instrument referring to ISO 9126 get 86% percentage. While testing of users using the instruments that refer to ISO 9126 aspects of functionality gets an average percentage of 88.2%.</p>

ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI KINERJA MANAJERIAL PADA INDUSTRI MANUFAKTUR DI JAWA TENGAH

This study examined the effect budget adequacy, timelines accountancy management information and organizational commitment on managerial performance, by using the unit analysis is manager who worked at the manufacturing company in Central Java. The sampling technique used is the purposive method, where the entire population sampled. Result from data processing, so can be taken conclusion as follows there positive influence and significant between variable budget adequacy, timelines accountancy management information and organizational commitment on managerial performance. The feasibility test results of the research model show a positive value significant influence between variables budget adequacy, timelines accountancy management information and organizational commitment are simultaneously on variable managerial performance. Result analysis of the coefficient determination indicates that the variables budget adequacy, timelines accountancy management information and organizational commitment variation affecting the variable managerial performance.

SISTEM PENDUKUNG KEPUTUSAN PENJURUSAN SISWA MENGGUNAKAN ALGORITMA SIMPLE ADDITIVE WEIGHTING

Inappropriately high school majors can be detrimental to students in the future. With the right majors are expected to maximize the potential, talent and ability of individual students, so that will maximize the academic value of these students. The method of majors conducted in a school is basically still using conventional methods so there are some weaknesses of the method and in the determination of its course only based on ranking, without specifying the weight of each criteria, with the method based on the analysis and experience that happened there are still some students can not compete with his classmates in developing his academic potential and ultimately to solve the problem in one school to re-clarify at the beginning of the even semester which aims to map the ability of each student and the necessity to build a student majors application based on the academic potential that is able to generate maximum decisions from each student, by looking at the existing problems it is needed an alternative solution that is by designing and building Supporting System Decision in Simple Additive Weighting (SAW) method, supported by Unified Modeling Language (UML) as application design, PHP as programming language and MySQL as its database. In the test of the built application, using the Blackbox method, and the system feasibility test results using 25 test attributes, 21 valid attributes and 4 invalid attributes and a feasibility value generated from the system of 84%, thus the application is eligible to use despite the repair and development still needs to be improved.

Pengembangan Media Pembelajaran Berbasis Android Pada Mata Kuliah Sistem Operasi di Universitas Hamzanwadi

The purpose of this study is to find out: (1) Results of Development of Android-Based Learning Media At the Course of Operation System Semester II Informatics Education Study Program Hamzanwadi University, (2) the level of feasibility of learning media developed. This research is a Research and Development research with ADDIE development model, which are: Analisys, Design, Development, Implementation and Evaluation. Instrument used in this research is lift (quisioner) by using likert scale. Sources of research data are 2 media experts, 2 material experts, and 30 students of study program of informatics education. The results of this study are the Development of Android-Based Learning Media with the display of a list of menu pages, Profile, Material, Submenu Matter, Video, submenu Video, RPS, Instructions. Feasibility test results of Media Expert reviewed from 2 aspects included into the category Very Eligible (90%). And the test results from the Master of Materials into the category of Very Eligible (86%). Based on the response of media usage by 30 Students of Second Semester of Informatics Education Study Program is categorized as feasible (78

Design of Interactive Learning Multimedia Development in General Administration Subject

This study was a research and development. This study aimed to find out the feasibility and validity of interactive learning multimedia in general administration subject. Lectora Inspire-based interactive learning media was tried out through validation by media expert, linguist, material expert, practitioners, and with the students through learning process.The result of validation by material expert on the media developed obtained total score of 87.5% belonging to very good criterion, the result of validation by material expert obtained total score of 95% belonging to very good criterion, the result of validation by linguist obtained total score of 100% belonging to very good criterion, and the result of validation by practitioners obtained total score of 93.10% belonging to very good criterion. The result of validation conducted by expert was also supported with the result of feasibility test in product tryout obtaining score of 87.5% belonging to very good criterion.The conclusion of research was that Lectora inspire based interactive learning in general administration subject was valid and feasible to use as learning media in school.

ANALISIS POTENSI LAHAN DAN STRATEGI PENGEMBANGAN SAWAH BARU SECARA BERKELANJUTAN DI KECAMATAN JATIGEDE, KABUPATEN SUMEDANG, PROVINSI JAWA BARAT

The landuse change from paddy field to non-rice field in Java is increasing every year and this has an impact on the decreasing of national food security. Likewise the occurrence of land conversion of around 2,000 ha for the construction of Jatigede reservoir in Sumedang Regency, West Java Province has an impact on the decrease of rice production about 24 thousand tons of GKG (assuming rice productivity 6 ton/ha). The development of new sustainable rice fields is one of the solutions to improve food security and sustainability in the future both in Sumedang and Indonesia. The objectives of this research are: 1) to analyze the availability and suitability of land for the development of new paddy fields; 2) to analyze environmental feasibility and cost (environmental cost) in new rice field development activities; 3) analyze farmer institutional support in new rice field development activities; 4) to formulate the direction of new rice field development plan; and 5) to formulate a new rice field development strategy in Jatigede sub-district. The results are expected to be input for future planning for the development of new rice fields in Jatigede Subdistrict, Sumedang Regency. The study was conducted from December 2016 to May 2017. The type of data used consists of primary data and secondary data. Primary data is obtained from direct surveys to the field by conducting ground checks or through interviews. The results showed that the potential land available for the development of new paddy fields in Jatigede sub-district was 3,419 ha and from the potential land area will be developed into new paddy fields of 346 ha (4.18%) spread over 4 (four) villages, ie Cipicung 54 ha, Ciranggem Village covering 94 ha, Cisampih Village covering 107 ha and Karedok Village area of 91 ha. The result of feasibility test on new paddy field development activity in Jatigede subdistrict shows Net Present Value (NPV) is Rp. 92,893,000,000 and Benefit Cost Ratio (B/C) 3.32. Development strategies are: Respectively development strategies comprise (1) Optimize government financing assistance to accelerate the implementation of new paddy field target, (2) Together with the head of the farmer group association assist the paddy field construction process, (3) Conduct a survey of water resources and other supporting infrastructure around paddy field area, (4) Ensuring the new paddy field is not overlapping with other area, (5) Socialize the long-term benefits of the development of new paddy field by getting subsidy for three year since the first year development. (6) Encourage local governments to established immediately as LP2B areas and included in the RTRW of Jatigede District.

Development of web-based dental health ladder snake game for public elementary school students in Indonesia

AbstractEducation of oral and dental hygiene for elementary students is often constrained by the nature of children who are easily saturated, so that media and games need to be an interactive, interesting and fun simulation that entices their interest and curiosity in learning. The purpose of this research is to develop a web-based dental health ladder snake game for oral health education of the elementary school students in Indonesia. The analysis, design, development, implementation and evaluation model approach is applied and tested by material and media experts. In this study, the fifth grade elementary students were participated as a trial group, and they were asked to use the designed ladder snake game. Questionnaire about the feasibility of learning media ladder snake game using a Likert scale was developed. The feasibility test results showed that the material experts were 80% (very good), media experts were 75% (Good) and 83% (excellent) for elementary students.Keywords: Ladder snake game, dental health, multimedia designing.

Development of Letshoot Applications as an Instructional Media of Computer Network Troubleshooting

Based on the observations made in Class XII TKJ SMK Negeri 1 Banyudono, it is known that the interest of students on computer network troubleshooting material is low because the learning materials are delivered through the presentation media in one direction from teacher to student. This makes students less understand the material presented by the teacher. Based on the background of the problem, we propose to build an android based learning media that can help students learn independently, this application is called Letshoot. Letshoot were made as an instructional media of computer network troubleshooting that can help students learn independently without being hindered by place, time and teacher attendance. This research aims to develop and measure the feasibility level of Letshoot application. This app will help student to learn computer network troubleshooting. Using Borg and Gall's research and development model with the application developed in five stages: (1) data collection, (2) planning, (3) develop the preliminary form of product, (4) preliminary field testing, and (5) main product revision. The result of feasibility test of Letshoot application measured by using Likertscale from expert media get percentage 90,64% which belongs in very feasible category, from expert material equal to 82% which belongs very feasible category and from user equal to 82,11% which belongs to very feasible category to be used as a medium of learning. On these results can be concluded that the Letshoot application very feasible to use as a learning media of computer network troubleshooting in vocational high school