Ridge Resorption Research Articles

Clinical Evaluation of Stability of Short Deep Threaded Dental Implant During Early Healing Period: A Prospective Controlled Clinical Trial

Objectives: To assess the initial stability of short, deep-threaded dental implants placed in the posterior mandible and to determine the influence of deep-thread design on implant stability during early healing. Methods: Twenty short, deep-threaded implants were placed in the posterior mandibular region of ten patients. Insertion torque value (ITV) was recorded at implant placement. Implant stability quotient (ISQ) was measured immediately post-surgery and at weeks 2, 3, 4, and 5. Results: No significant difference in ITV was observed between short and standard implants. ISQ values did not significantly differ between implant types across the evaluation period (F = 1.17, p = 0.3). Conclusion; Short, deep-threaded implants demonstrate comparable primary stability to standard implants in the posterior mandible. These findings support their use as a viable treatment option for patients with advanced alveolar ridge resorption

Effects of Simvastatin-Loaded Nanomicelles on the Early Preservation of Tooth Extraction Sites.

The present study intended to evaluate the effect of simvastatin-loaded nanomicelles (SVNs) on promoting new bone formation and reducing alveolar ridge resorption at the tooth extraction sites at the early healing of the extraction sockets. SVNs were synthesized using a dialysis method. The rabbit tooth extraction model was established, SVNs and simvastatin (SV) were loaded on gelatin sponge and inserted into the extraction socket. CBCT scans were performed at 0, 2, and 4weeks postoperatively to evaluate bone formation and alveolar ridge absorption in the extraction sockets. And all the animals were sacrificed and the mandibles were harvested. And HE staining and Masson staining were used for histological evaluation of the bone formation in the extraction sockets. Radiographic evaluation showed that compared with the blank control group, at 2 and 4weeks after extraction, SVNs increased the new bone density in the extraction sockets by 75.7% and 96.5%, and reduced the absorption rate of alveolar ridge length at the extraction sites by 60.8% and 49.1%, respectively. Histological evaluation showed that SVNs significantly improved the maturation of new bone tissue in the extraction sockets. SVNs can significantly accelerate healing and effectively reduce the absorption of alveolar ridge at the extraction sites in the early stage of tooth extraction socket healing.

Effect of different implant positions for two implant-retained mandibular overdenture: a retrospective 5-years radiographic evaluation of the circumferential peri-implant bone loss and posterior ridge resorptive changes

BackgroundStudies did not recommend which position for implant overdenture poses the lowest biomechanical risk and the least chance of peri-implant bone loss and ridge resorption for those who might need a mandibular two-implant overdenture. The study objectives were to investigate the impact of implant position, in lateral incisors or canine positions, on peri-implant bone loss and posterior ridge resorption.MethodsFifty patients with mandibular two-implants were recalled and divided according to the implant position into two groups (group L: implants in lateral incisor positions and group C: implants in canine positions). The circumferential peri-implant bone level and posterior ridge resorption were assessed at implant insertion (T0), one year later (T1), and five years later (T5) using the follow-up CBCT. Data were analyzed using the Statistical Package of Social Science (SPSS) program. A Mann-Whitney test was used to compare two different groups. Paired groups were compared using the Wilcoxon signed-rank test. The threshold of significance is fixed at a 5% level (p-value).ResultsSignificant differences in the vertical bone loss between groups appeared at (T5 - T1) (Mann Whitney test, (P = 0.01)) and at (T5 - T0) (Mann Whitney test, (P = 0.005)), and a significant difference in horizontal bone loss between groups was found at (T1 - T0) (Mann Whitney test, (P = 0.041)) and (T5 - T1) (Mann Whitney test, (P = 0.041)). Also, there were significant differences over the evaluation period between groups at certain points along the ridge at M1 (Mann Whitney test, (P = 0.021)), M3 (Mann Whitney test, (P = 0.008)), and M4 (Mann Whitney test, (P = 0.015)).ConclusionsAccording to the findings of this clinical study, the placement of implants in the lateral incisor position for two implant-retained overdentures is a viable choice. In comparison to the canine position, the lateral incisor position demonstrated superior peri-implant responses, which could potentially enhance the longevity of the implants. Furthermore, the placement of implants in the lateral incisor position can promote a more even distribution of stress and help mitigate posterior ridge resorption. Conversely, implants in the canine position may cause a seesaw effect and result in greater posterior ridge resorption.Clinical Trial Registry Number(NCT06055842) (13/03/2024).

Autologous platelet concentrates in alveolar ridge preservation: A systematic review with meta-analyses.

In order to evaluate the therapeutic advantages of various autologous platelet concentrates (APC) as a single biomaterial during alveolar ridge preservation (ARP), a systematic review with meta-analyses was conducted. PubMed, EMBASE, Web of Science, and Scopus were screened for randomized controlled trials (RCTs) that were released prior to 2024. The selected papers compared an APC with either unassisted healing (blood clot) or another biomaterial during ARP (third molars were not included). The outcome parameters included alveolar bone dimension alterations, soft tissue healing, and post-op pain intensity. The search yielded 35 papers (33 studies), one applying platelet-rich plasma (PRP), six using plasma rich in growth factors (PRGF), and 28 using leukocyte- and platelet-rich fibrin (L-PRF). These studies showed a large heterogeneity (e.g., outcome parameters, timing, surgical approach, and inclusion criteria), which hindered drawing strong conclusions. In most studies, however, ARP with PRP, PRGF, and L-PRF alone produced faster soft tissue healing, less post-extraction pain, less alveolar ridge resorption, more socket bone fill, and a higher bone density when compared to unassisted (spontaneous) healing. The ultimate benefit appears to be significantly influenced by the surgical approach. Limited literature exists comparing APC with other biomaterials for ARP, resulting in inconclusive data. APC application for ARP is a promising strategy to improve soft and hard tissue healing and reduce post-extraction pain.

POLYAMIDE FLEXIBLE DENTURES – A BETTER OR WORSE STRATEGY

Background: Polyamide dentures have added advantages over the acrylic dentures in terms of esthetics, comfort and versatility to adapt to the undercut areas. However, the effect of flexibility of these dentures from the view of residual ridge resorption has always been obscure. The aim of this study is to compare the type of denture base with the distribution of masticatory forces by examining the changes on the alveolar mucosa in the histological picture before and after insertion of two widely used dentures. Materials and methods: A total of 20 participants were included in the study, among which 10 patients were allocated for acrylic removable partial dentures and 10 patients were allocated for polyamide flexible removable partial dentures. The patients were asked to rinse their mouth and cement spatula was used to collect the epithelial mucous cells noninvasively by scraping the crest of the residual alveolar ridge with light pressure in premolar-molar area both before insertion and 2 weeks after insertion of the removable partial dentures. The said swab was then smeared on a clean glass slide and fixed in 95% ethyl alcohol and was stained by Papanicolaou (PAP) stain. The PAP-stained smear was analyzed for the presence of keratinized cells and the number of keratinocytes was counted for both acrylic and polyamide denture groups. Results: The results show that both types of denture bases altered the alveolar mucosal keratinization but there was a significant difference in number of keratinized cells between all the three groups. Polyamide flexible partial dentures showed more ortho-keratinized epithelium, which favours better occlusal load distribution. Conclusion: The results concluded that there was decreased masticatory load on the residual alveolar ridge under polyamide denture group due to the flexibility of the denture base material compared to that of the acrylic denture group.

An Overview of Prosthetic Implant Attachments in EdentulousPatients

Edentulism is an unresolved health care issue of sustained significance and prevalence in the aged population. Adaptation to wearing complete dentures is a complex process and must be considered from both somatic and psychological standpoints. The difficulties of wearing dentures have been attributed to deficiencies of the denture-bearing tissues, reduced salivary flow,vulnerable tissue and severe ridge resorption. The prosthetic management of the edentulous patient has always been a major challenge. Complete maxillary and mandibular dentures have been the traditional treatment option. However, most of the patients report problems adapting to the mandibular denture due to lack of comfort, retention and stability. It is well known that implantretained/supported overdentures provide improved retention, support, stability, function, and comfort for patients

Effect of thermocycling on tensile bond strength of autopolymerized, heat-polymerized, milled, and 3D printed denture base materials bonded to 4 different denture liners: an in vitro study

BackgroundDigitally fabricated dentures may require relining due to continual alveolar ridge resorption. However, studies evaluating the tensile bond strength (TBS) of digitally fabricated dentures bonded to denture liners are lacking. This study aimed to evaluate the TBS of autopolymerized, heat-polymerized, milled, and 3D printed denture base materials bonded to 2 acrylic-based and 2 silicone-based denture liners, both before and after thermocycling. Additionally, the impact of thermocycling on the TBS were also evaluated.MethodsThe TBS of 4 different denture base materials (Palapress (PL), Vertex Rapid Simplified (VR), Smile CAM total prosthesis (SC), and NextDent denture 3D+ (ND)) bonded to 2 acrylic-based (GC Soft-Liner (GC) and Tokuyama Rebase II (RB)) and 2 silicone-based (Ufi Gel P (UP) and Sofreliner Tough M (ST)) denture liners were tested. Specimens (n = 8) were divided into non-thermocycling and thermocycling groups. Non-thermocycling specimens were tested after 24-hours water immersion, while thermocycling specimens were underwent 5000 cycle and were immediately tested. Mode of failure was examined under a stereomicroscope. Data were analyzed using 2-way ANOVA and Tukey HSD tests (α = 0.05), and independent samples t test (α = 0.05) for TBS between non-thermocycling and thermocycling groups.ResultsFor the non-thermocycling groups, within the same denture liner material, no significant differences were found between denture base materials, except the ND + RB group, which had significantly lower TBS. For the thermocycling groups, within the same denture liner material, the TBS in the PL group exhibited the highest and the ND group exhibited the lowest. Within the same denture base material, in both non-thermocycling and thermocycling groups, the TBS in the ST group exhibited the highest; in contrast, that in the GC group exhibited the lowest. No significant differences were observed in TBS between non-thermocycling and thermocycling groups, except for denture base materials bonded to the ST group, SC + UP, and ND + UP groups.ConclusionsMilled denture base can be relined with acrylic-based or silicone-based denture liner. However, cautions should be exercised when relining 3D printed denture base. Thermocycling did not affect TBS between acrylic-based denture liners and denture bases. In contrast, it affected the bond between silicone-based denture liner and denture base.

Modified Combined Impression Technique for Cawood & Howell Class V/VI Mandibular Ridges: A Case Report

Geriatric prosthodontic rehabilitation with compromised residual ridge has become challenging, the principal concern being rejuvenating and maintaining complex stomatognathic functional harmony with severe residual ridge resorption (RRR). Modification of contemporary treatment techniques should be considered to achieve a patient’s functional and esthetic requirements. Contemporary prosthodontics utilizing combination of Neutral zone technique (NZ) and all green impression (AGI) for the management of Cawood & Howell Class V/VI (severely resorbed) ridges are innovative techniques for the construction of removable prosthesis with a profound effect in denture stability and retention, particularly in mandible. NZ implies the principle of synergistic activity of Oro-muscular function in denture stability by arranging the prosthetic teeth within the neutral zone area, hence preventing their interfere with the oro-muscular function, while AGI aimed at achieving prosthesis retention through functional moulding and the viscosity of impression material helps disseminate the forces transmitted to the denture-bearing area reducing the potential for discomfort arise from the soft tissue folds over atrophic ridge. This case report attempts to present a combination of modified impression techniques utilizing all green impression techniques and neutral zone techniques in a 66-year-old patient for C&H Class V mandibular ridge. The goal of this technique is to provide optimal stability covering the maximum denture bearing area and selectively distributing the pressure and to produce a denture molded by oro-muscular function in harmony with its surrounding structures thereby enhancing stability and retention.

Four locator attachments of mandibular implant-retained overdentures with two different distributions: A 10-year retrospective preliminary study of residual alveolar ridge changes.

There is little information on the long-term function of the four Locator attachment of the mandibular implant retained overdenture (OD), particularly with different distributions. To compare the effect of different four inter-foraminal implant distributions retaining a mandibular OD after 10 years of function on posterior mandibular ridge resorption (PMandRR), anterior maxillary ridge resorption (AMaxRR), and the amount of marginal bone loss (MBL) around all four implants. Twenty-two participants with total edentulism who had worn mandibular OVDs retained by four inter-foraminal implants for 10 years of functional life were selected for this study. They were divided into two groups based on implant distribution: Group I with a quadrilateral distribution (QD) of implants and Group II with a linear distribution (LD) of implants. PMandRR, AMaxRR, and MBL around implants were measured. After 10 years of function, PMandRR was significantly higher in the LD group than in the QD group (p < 0.001*). There was no significant difference in AMaxRR between the QD and LD groups (p = 0.431). The QD group showed a significantly greater amount of MBL around dental implants when compared with the LD group (p = 0.002*). The LD of implants demonstrates more PMandRR compared with the QD. The QD of implants demonstrates a greater amount of MBL around dental implants compared with the LD. Both implant distributions demonstrate the same effect on the AMaxRR. MBL around implants remained within normal accepted values after 10 years of function.

Exploring Genetic Link of Residual Ridge Resorption in Completely Edentulous Individuals: A Prospective Case-Control Clinical Study.

Residual ridge resorption presents obstacles in prosthodontic treatment, affecting denture stability and the success of dental implants. Genetic elements, specifically the single nucleotide polymorphism (SNP) 1772C>T variant within the hypoxia-inducible factor 1 subunit alpha (HIF-1α) gene, are hypothesized to contribute to residual ridge resorption progression. Nevertheless, its impact remains insufficiently investigated, especially within the context of South Indian populations. We sought to investigate the connection between SNP 1772C>T and residual ridge resorption (RRR) among fully edentulous individuals, considering demographic factors, genotyping methodologies, and statistical evaluations. In a prospective case-control study, we recruited 100 completely edentulous participants from South India. Participants were categorized based on alveolar ridge height. Saliva samples were non-invasively collected for DNA extraction, and polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) analysis was employed to determine genotype distribution using the HphI restriction enzyme. The statistical evaluations comprised the utilization of chi-square and Fisher's exact tests. We observed no significant variations in genotype distributions between the case and control cohorts (CT: p=0.24; CC: p=0.65; TT: p=0.30). The heterozygous genotype CT was prevalent in both groups. Although we did not observe significant associations between SNP 1772C>T and RRR, our findings imply a genetic predisposition to residual ridge resorption that warrants further exploration. Variations in genetic susceptibility across ethnicities and the influence of other genetic variants on residual ridge resorption require additional investigation. This study lays the groundwork for personalized prosthodontic care by highlighting the potential of genetic analysis in routine dental practice to improve treatment strategies.

Fish scale-derived hydroxyapatite for alveolar ridge preservation.

Alveolar ridge resorption following tooth extraction poses significant challenges for future dental restorations. This study investigated the efficacy of fish scale-derived hydroxyapatite (FSHA) as a socket preservation graft material to maintain alveolar bone volume and architecture. FSHA was extracted from *Labeo rohita* fish scales and characterized using Fourier transform infrared (FTIR) analysis. In vitro, biocompatibility and osteogenic potential were assessed using Saos-2 human osteosarcoma cells. Cell viability, migration, and proliferation were evaluated using MTT and scratch assays. In vivo performance was assessed in a rat model, and FSHA was compared to a commercial xenograft (Osseograft) and ungrafted controls. Histological analysis was performed at 8-week post-implantation to quantify new bone formation. FTIR confirmed the purity and homogeneity of FSHA. In vitro, FSHA enhanced Saos-2 viability, migration, and proliferation compared to controls. In vivo, FSHA demonstrated superior bone regeneration compared to Osseograft and ungrafted sites, with balanced graft resorption and new bone formation. Histological analysis revealed an active incorporation of FSHA into new bone, with minimal gaps and ongoing remodeling. Approximately 50%-60% of FSHA was resorbed by 8 weeks, closely matching the rate of new bone deposition. FSHA stimulated more bone formation in the apical socket region than in coronal areas. In conclusion, FSHA is a promising biomaterial for alveolar ridge preservation, exhibiting excellent biocompatibility, osteogenic potential, and balanced resorption. Its ability to promote robust bone regeneration highlights its potential as an effective alternative to currently used graft materials in socket preservation procedures.

Efficacy of Platelet-Rich Fibrin in Preserving Alveolar Ridge Volume and Reducing Postoperative Pain in Site Preservation of Post-Extracted Sockets.

Background and Objectives: In socket preservation, the goal is to minimize bone resorption after tooth extraction to maintain the volume and contour of the alveolar ridge. The use of PRF in post extraction sites may reduce ridge resorption by encouraging the growth of new bone and acting as a scaffold for tissue. In addition, PRF may enhance healing and minimize postoperative pain. The aim of this study was to evaluate the effectiveness of platelet-rich fibrin (PRF) in maintaining the ridges' dimensions at the extraction site, in the maxilla and mandible, as well as its impact on post-extraction discomfort. Methods: The study was conducted on 60 patients presenting for extraction of posterior teeth and was randomly divided into three groups: group I PRF (n = 20), group II PRF + collagen (n = 20), and group III control (n = 20). Sockets were filled with PRF (group I) and PRF + collagen (group II). At baseline and follow-up after 3 months, CBCT was used to assess the bone dimensions. The postoperative pain evaluations were performed at 24 h, 3 days, and 7 days after the tooth extraction. The pain rate was evaluated using a numerical rating scale from the British Pain Society. Results: The study examined the effects of platelet-rich fibrin (PRF) and PRF combined with collagen on the height and width of the ridges, as well as the pain experienced by the patients following alveolar ridge preservation surgery. ANOVA and t-tests were used to evaluate and compare the ridge dimensions. Comparing the results to the control group, there were no significant differences in the height or width of the ridges. However, both the PRF and PRF + Collaplug® treatments effectively reduced the short-term postoperative pain. Conclusions: The study findings suggest that platelet-rich fibrin (PRF) and PRF combined with collagen do not exert significant effects on ridge width and height compared to the standard treatment following alveolar ridge preservation. However, it is noteworthy that both the PRF and PRF + collagen treatments demonstrated efficacy in reducing postoperative pain in the short term, offering a potential advantage over standard treatment protocols.

A Soft-Tissue Driven Bone Remodeling Algorithm for Mandibular Residual Ridge Resorption Based on Patient CT Image Data.

The role of the biomechanical stimulation generated from soft tissue has not been well quantified or separated from the self-regulated hard tissue remodeling governed by Wolff's Law. Prosthodontic overdentures, commonly used to restore masticatory functions, can cause localized ischemia and inflammation as they often compress patients' oral mucosa and impede local circulation. This biomechanical stimulus in mucosa is found to accelerate the self-regulated residual ridge resorption (RRR), posing ongoing clinical challenges. Based on the dedicated long-term clinical datasets, this work develops an in-silico framework with a combination of techniques, including advanced image post-processing, patient-specific finite element models and unsupervised machine learning Self-Organizing map algorithm, to identify the soft tissue induced RRR and quantitatively elucidate the governing relationship between the RRR and hydrostatic pressure in mucosa. The proposed governing equation has not only enabled a predictive simulation for RRR as showcased in this study, providing a biomechanical basis for optimizing prosthodontic treatments, but also extended the understanding of the mechanobiological responses in the soft-hard tissue interfaces and the role in bone remodeling.

Effect of alveolar ridge preservation at periodontally compromised molar extraction sockets: A retrospective cohort study.

To date, the clinical evidence regarding the effectiveness of alveolar ridge preservation (ARP) in restricting alveolar bone height and width change after extraction at periodontally compromised molar extraction sockets still remains controversial. This retrospective cohort study aims to evaluate the effect of ARP in molars extracted for periodontal reasons. Retrospective data were collected from patient electronic records from January 2019 to December 2023. Patients with Stage III/IV periodontitis who underwent extraction of molars for periodontal reasons were screened for eligibility. The outcomes included the horizontal and vertical dimensions of alveolar bone. The need for additional augmentation procedure during implantation was also evaluated. A linear regression model was used to adjust for known confounders. A total of 80 sockets were included in this study, of which 27 sockets received ARP therapy after extraction while 53 sockets experienced natural healing (NH). ARP resulted in significantly less bone height change in the periodontally compromised molar sites compared to the NH group (p<0.001). In sockets displaying a height disparity of >2mm between the buccal and palatal/lingual walls, the ARP group exhibited advantageous outcomes in terms of ridge width change, surpassing the NH group (p=0.004). Moreover, the percentage for additional augmentation was significantly reduced in the ARP compared to the NH group (p=0.006). Age, sex, smoking, jaw, location, and buccal wall thickness did not show any significant effect on bone height change. ARP had benefits on limiting ridge resorption subsequent to molar extraction for periodontal reasons.

Prevalence of Osteoporosis and Its Effect on Residual Ridge Resorption in Postmenopausal Females of Rural Central Indian Region.

To determine the correlation between body mass index (BMI), bone mineral density (BMD), and residual ridge resorption (RRR) in postmenopausal females and the effect of osteoporosis on RRR. A study was conducted with 60 postmenopausal female individuals. BMI was calculated using the weight and height of the patient using a formula. BMD was assessed and graded using a T-score. RRR was determined using the Tallgren method. Most individuals showed a higher BMI (63.33%), which is in the overweight or obese category. BMD was lower in approximately 68.33% of patients, and RRR was significantly higher in about 60% of total patients. The higher the BMI values, the lesser the BMDand the higher the RRR.

Half- and full-grafting alveolar ridge preservation with different sealing materials: A three-arm randomized clinical trial.

The objective of this study is to investigate the effect of different alveolar ridge preservation (ARP) approaches on bone resorption and their potential for facilitating implant placement. Patients who underwent one or two tooth extractions with a desire for restoration were included in the study. The participants were randomly assigned to one of three groups for ARP. The groups were as follows: (1) Half grafting of bovine bone mineral (DBBM-C) covered with non-resorbable dense polytetrafluoroethylene (dPTFE) membrane (Test 1 group); (2) Half grafting of bovine bone mineral (DBBM-C) covered with collagen membrane (Test 2 group); and (3) Full grafting with collagen membrane (DBBM-C + Collagen membrane) as the Control group. After 6-month healing period, the evaluation encompassed clinical, radiographic, implant-related outcomes, and the factors contributing to hard and soft tissue alterations. Enrollment in this study comprised 56 patients. At the 6-month follow-up, radiographic analysis in computed beam computed tomography images was conducted for 18, 19, and 19 patients with 18, 20, and 20 tooth sites in Test 1, Test 2, and Control groups, respectively. Additionally, a total of 15, 17, and 17 patients with 15, 18, and 17 implants were evaluated. Based on radiographic analysis, all groups showed limited ridge resorption at 1 mm from crest horizontally (Test 1: 1.29 ± 1.37; Test 2: 1.07 ± 1.07; Control: 1.54 ± 1.33 mm, p = 0.328), while the Control group showed greater radiographic bone height gain in mid-crestal part vertically (Test 1: 0.11 ± 1.02; Test 2: 0.29 ± 0.83; Control: -0.46 ± 0.95 mm, p = 0.032). There were no significant intergroup differences in terms of keratinized mucosal width, bone density, insertion torque, and the need of additional bone graft. However, the use of a dPTFE membrane resulted in a significantly higher vertical mucosal thickness (Test 1: 2.67 ± 0.90; Test 2: 3.89 ± 1.08; Control: 2.41 ± 0.51 mm, p < 0.001). The study showed comparable dimensional preservation with limited vertical shrinkage, while thin buccal bone plate, non-molar sites, and large discrepancy between buccal and palatal/lingual height may contribute to greater shrinkage. Thicker mucosa with dPTFE membrane required further investigation for interpretation. NCT06049823. This clinical trial was not registered prior to participant recruitment and randomization.

Digital denture with mucostatic base and functional borders: A cast-free digital technique.

Digital complete dentures fabricated using a mucostatic impression, like intraoral scans, are desirable for their beneficial effect on long-term residual ridge stability but may have less retention than those fabricated with a mucocompressive impression. Border molding procedure may improve initial retention, thus favoring adaptation to new dentures, especially in cases where neuromuscular dysfunctions may diminish the patient's ability to cope with adapting to existing motor patterns or learn new ones. However, a mucocompressive impression may cause higher residual ridge resorption, thus resulting in a retention decrease over time. A desirable combination would be a digital denture with a mucostatic intaglio surface obtained from intraoral scans and functional borders. A cast-free digital workflow for that is demonstrated in this technical report.

Tooth-Supported Overdenture – Preventive Prosthodontics to Redeem Ridge Resorption

Abstract This case series elaborates on tooth-supported overdenture for prosthetic rehabilitation as a treatment modality in partially edentulous patients. Loss of teeth causes continuous ridge resorption and poor denture foundation affecting the success of prosthesis. Retained natural teeth act as abutments for prosthetic rehabilitation of partial edentulous arches. Tooth-supported overdenture is the mainstay of preventive prosthodontics which preserves natural teeth and/or roots. The cases describe the use of tooth-supported complete overdenture and removable partial overdenture with metal denture base to rehabilitate partially edentulous arches. The natural teeth maintain proprioception and provide additional support, stability, retention, and psychological benefit to the patient than the conventional complete denture with completely edentulous ridges.

Utilizing Neutral Zone Technique In Denture Fabrication For A Patient With Severe Mandibular Ridge Resorption - A Case Report.

Residual ridge resorption remains a significant concern in the field of prosthodontics and implant dentistry, posing challenges in the successful rehabilitation of edentulous patients. Residual ridge resorption is a common phenomenon following a tooth extraction, leading to significant changes in the alveolar ridge's shape and volume. This article aims to provide a comprehensive overview of the various treatment modalities available for managing residual ridge resorption. The case report presents a novel treatment modality for managing residual ridge resorption and its successful application in a clinical case

Immediate Loading Using the Digitalized Customized Restoration of Single-tooth Implants Placed in Fresh Extraction Sockets in the Aesthetic Anterior Maxilla: A 10-Year Prospective Study of Marginal Bone Level.

The objective of this study was to assess marginal bone level around single implants inserted in fresh extraction sockets in the anterior maxillary region and instantly restored with computer-aided design/computer-aided manufacturing customized temporary crowns cemented on the final abutment. A total of 20 patients (15 females and 5 males, with a mean age of 30 years), where 20 were placed in fresh extraction sockets. After raising a full-thickness flap, atraumatic extraction was performed the implant site was prepared and fixtures were stabilized on the palatal bone wall. The implant location was immediately transmitted to the prepared master model using the pick-up impression coping seated in the surgical guide template. Prefabricated abutments were used as the final abutment on the master model, scanned and the crown was planned using computer-aided manufacturing customized software. Later on 8th weeks, abutments were torqued as per the manufacturer's recommendation, and the final crowns were cemented. Using personalized intraoral radiographs marginal bone level was evaluated mesially and distally to the implant shoulder as a reference at implant placement, 8 weeks, 1, 3, 5, and 10 years after loading. Wholly implants were osteo-integrated positively after 10 years of practical loading, but only 18 were available for clinical and radiological follow-up, and 2 patients with two implants were excluded from the study due to relocation abroad without any implant failure. The average marginal bone loss (MBL) in the current report was 0.16 ± 0.167 mm at crown cementation, 0.275 ± 0.171 mm after 1 year, 0.265 ± 0.171 mm after 3 years, 0.213 ± 0.185 mm after 5 years, and 0.217 ± 0.194 mm at 10 years. The strategy of inserting and not removing the final abutment at the time of implant placement facilitates the establishment of adequate attachment of both soft and hard tissues to the abutment surface, ensuring uninterrupted organization of tissue architecture and offers advantages in helping maintain soft tissue maturation and preventing marginal bone level. Immediately loaded implants in freshly extracted sockets lead to a significant reduction in marginal ridge resorption. The use of a temporary crown on a prefabricated abutment, exclusive of successive abutment manipulation, proved effective in preserving the primarily founding blood clot and served as a prototype for shaping the soft tissue around the previously wounded gum. How to cite this article: Berberi A, El Zoghbi A, Aad G, et al. Immediate Loading Using the Digitalized Customized Restoration of Single-tooth Implants Placed in Fresh Extraction Sockets in the Aesthetic Anterior Maxilla: A 10-Year Prospective Study of Marginal Bone Level. J Contemp Dent Pract 2024;25(3):213-220.