Resonance Energy Transfer Effect Research Articles

Double base mismatches mediated catalytic hairpin assembly for enzyme-free single-base mutation detection: integrating signal recognition and amplification in one.

Single nucleotide polymorphism (SNP) biosensors are emerging rapidly for their promising applications in human disease prevention diagnosis, treatment, and prognosis. However, it remains a bottleneck in equipping simple and stable biosensors with the traits of high sensitivity, non-enzyme, and low cost. Double base mismatches mediated chain displacement reactions have attracted fascinating advantages of tailorable thermodynamics stability, non-enzyme, and excellent assembly compliance to involvement in SNP identification. As the base mismatch position and amount in DNA sequence can be artificially adjusted, it provides plenty of selectivity and specificity for exploring perfect biosensors. Herein, abiosensor with double base mismatches mediated catalytic hairpin assembly (CHA) is designed via one base mismatch in the toehold domain and the other base mismatch in the stem sequence of hairpin 1 (H1) by triggering CHA reaction to achieve selective amplification of the mutation target (MT) and fluorescence resonance energy transfer (FRET) effect that is composed of Cy3 and Cy5 terminally attached H1 and hairpin 2 (H2). Depending on the rationally designed base mismatch position and toehold length, the fabricated biosensors show superior SNP detection performance, exhibiting a good linearity with high sensitivity of 6.6 fM detection limitand a broad detection abundance of 1%. The proposed biosensor can be used to detect the KRAS mutation gene in real samples and obtain good recoveries between 106 and 116.99%. Remarkably, these extendible designs of base mismatches can be used for more types of SNP detection, providing flexible adjustment based on base mismatch position and toehold length variations, especially for their thermodynamic model for DNA-strand displacement reactions.

Synthesis of phenol formaldehyde resin (PFR) based fluorescence resonance energy transfer (FRET) composites for double channel detection of latent fingerprints.

A reversible two-channel fluorescent nanocomposite with fluorescence resonance energy transfer (FRET) effect was designed for the development, analysis, and characterization of latent fingerprints (LFPs). For the construction of the FRET probe, a core of mesoporous silicas (MSNs) were used to encapsulate the organic dye rhodamine 6G (RhD-6) as an acceptor, while green-emitting monodisperse phenolic resin nanoparticles (PFR NPs) were selected as a donor. The up-conversion material (UC) of NaYF4:Yb,Er was synthesized using a simple hydrothermal method, and the MSNs-RhD-6/PFR (PRM) was electrostatically adsorbed onto the UC nanoparticles using a layer-by-layer method to obtain MSNs-RhD-6/PFR-UC (PMU). Compared to ordinary single-channel materials, PMU can be excited by different light sources (365 nm UV/980 nm laser) and its fluorescence can be reversibly switched between yellow and green, demonstrating excellent light reversibility. The PMU composites were successfully used to visualize and detect LFPs on various substrate surfaces using a simple powder coating method. Due to the existing FRET effect and dual-channel characteristics, this composite material displays excellent contrast, outperforming commercially available products for wider applicability. Even on complex backgrounds and after aging or washing treatments, it still clearly recognizes fingerprints in first-, second-, and third-level details, showing its great potential in latent fingerprint detection.

Formulating biomolecular crowns on micelles: A potential strategy for improving micelle stability

The complex environment in blood circulation has a tremendous destabilizing effect on the micelles structure, which is a vital issue to be addressed in micelles design and application. Biomolecule crowns, quickly formed on the surface of nanocarriers in vivo, may alter the physicochemical properties of nanocarriers. In this study, bovine serum albumin (BSA) or fetal bovine serum (FBS) was formulated as the biomolecular crown of the bacterial lipase-responsive micelles encapsulating the hydrophobic antibiotics chloramphenicol (CHL) to investigate their stabilization effect on the micelles. Compared with BSA-crowned micelles (BSA/PM@CHL), FBS-crowned micelles (FBS/PM@CHL) reduced drug leakage by more than 90 % without masking their lipase responsiveness, it also inhibited 77 % of bacterial growth in in vitro antibacterial activity study and significantly increased the area under plasma concentration curve and in vivo half-life in pharmacokinetic study. Then the Förster resonance energy transfer (Fret) Effect was used to further explore the mechanisms responsible for the differences between the BSA-crown and FBS-crown. The in vitro anti-dilution tests below the critical micellar concentration showed that FBS-crown could improve the thermodynamic stability of the micelles, the micelle integrity of FBS/PM was 2 times higher than that of PM diluted with aqueous dilution and 6.5 times higher than that diluted with rat plasma dilution. In vivo optical imaging study showed that micelles with dual-labeled FBS/PM (mean value = 0.363) maintained better structural integrity than dual-labeled PM (mean value = 0.325) after 4 h of injection, explaining the ability of FBS-crowned micelles to improve pharmacokinetic parameters in terms of thermodynamic stability. Besides, the destruction of PM integrity slowed down after injection into the blood circulation for 4–8h, indicating that the baring of biomolecular-crown may be in the late cycle. Overall, the biomolecular-crowned micelles strategy presents a promising strategy for maintaining the structural and functional stability of micelles under physiological conditions.

Multidimensional detection of roxarsone via AIE-based sulfates

Improper abuse of roxarsone (ROX) in industrial production leads to harmful effects on water, soil, food, and living creatures. It is significant to detect its concentration in the environment and biosystem. Herein, two aggregation-induced emission (AIE)-active fluorescence probes, TPE-TPE and TPE-TPE-CN, are successfully synthesized via a sulfur (VI) fluoride exchange (SuFEx) click reaction and first employed to detect ROX in the environment and living 3T3 cells. These two probes can selectively detect ROX in water due to the synergistic effect of photoinduced electron transfer (PET) and fluorescence resonance energy transfer (FRET) between the probes and ROX. The detection limit of TPE-TPE and TPE-TPE-CN is 0.154 and 0.385 μmol/L, respectively, much lower than the safety concentration stipulated by the World Health Organization (WHO). In addition, with the aid of a color discrimination application in a smartphone, these two probes can also detect ROX in real samples (such as water, soil, and cabbage), demonstrating their excellent potential for monitoring ROX in a practical environment.

Less interference fluorescence analytical strategy: Bridging substance-triggered ratiometric sensor with convenient preparation and application

High interference and narrow application range are key of bottleneck of recent fluorescence analysis methods, which limit their wide application in the sensing field. Therefore, to overcome these disadvantages, a ratiometric fluorescence sensing system utilizing berberine (BER) and silver nanoclusters protected by dihydrolipoic acid (DHLA-AgNCs) was constructed for the first time in this work, to achieve determination of BER and daunorubicin (Dau). BER aqueous solution (non-planar conformation) has no fluorescence emission. When it was mixed with DHLA-AgNCs, the conformation of BER became planar, producing fluorescence emission at 515 nm besides the fluorescence emission peak of DHLA-AgNCs at 653 nm. With the increase of BER concentration added in system, the fluorescence intensity of BER (planar conformation) at 515 nm increased obviously and the fluorescence intensity of DHLA-AgNCs decreased slightly. Therefore, the dual emission fluorescence sensing system was constructed based on a fluorescence substance and non fluorescence substance, to achieve determination of BER. Meanwhile, based on the bridging effect of BER and fluorescence resonance energy transfer effect from Dau, the altering of two peaks intensity was utilized to achieve determination of Dau. Thus, this dual emission sensing system can not only be used for fluorescence analysis of BER and its analogues, but also based on the bridging effect of BER, allowing the determination of Dau and its analogues that could not be directly measured with silver nanoclusters, expanding the application range of traditional dual emission detection systems. Meanwhile, this system has strong anti-interference ability and low toxicity to the human body and less pollution to the sample and environment. This provides a new direction and universal research strategy for the construction of new fluorescence sensing systems in the future for the analysis of target substances that cannot be directly detected with conventional fluorescence analysis methods.

Simulation and design of dual-wavelength all-optical semiconductor optical amplifier with solution-processed quantum dots

All-optical semiconductor optical amplifiers (SOAs) present a cost-effective and highly efficient solution for long-distance WDM networks. In this study, the investigation of a dual-wavelength all-optical SOA incorporating two distinct sizes of solution-processed InAs/AlAs core/shell quantum dots (QDs), operating at 1.31 and 1.55 μm wavelengths, both simultaneously and individually, has been proposed. To comprehensively evaluate the optical performance of our proposed dual-wavelength all-optical SOA, the modified coupled rate equations governing carriers dynamics and the optical photon propagation equations have been solved numerically while taking into account both homogeneous and inhomogeneous broadening, as well as fluorescence or förster resonance energy transfer (FRET) effects. This computational approach provides valuable insights into the optical behavior of dual-wavelength all-optical SOA. In our proposed structure, cost-effective solution-based methods for implementing QDs of varying sizes offer flexibility to adjust QD size across a broad range, from as small as 0.1 nm to meet specific requirements. This adjustment is made with meticulous consideration of appropriate synthesis techniques.

Design and Construction of a Mixed-Ligand Coordinated Fluorescent Complex and Its Application for Sensing Ions, Antibiotics, and Pesticides in Aqueous Solution

In this work, a fluorescent complex [Zn(NTD)2(DTP)2(H2O)2]·(H2O)0.8 (Complex Zn), (H2NTD = 1,4-naphthalenedicarboxylic acid and DTP = 3,5-di(1,2,4-triazol-1-yl)pyridine) was synthesized. The fluorescent complex was characterized by single-crystal X-ray diffraction, powder X-ray diffraction, and thermogravimetric, elemental, infrared spectroscopy, and fluorescence analyses. In the fluorescence sensing tests, Complex Zn exhibited excellent fluorescence quenching efficiency towards Fe3+, MnO4−, Cr2O72−, nitrofurantoin, and imidacloprid in aqueous media. A mechanism investigation suggested that the fluorescence quenching caused by the quenchers toward the sensor was due to the inner filter effect and the fluorescence resonance energy transfer effect in the fluorescent sensing process.

Bacterial-mediated FRET between AIE and ACQ photosensitizers for enhanced antimicrobial photodynamic therapy

Antimicrobial photodynamic therapy (aPDT) effectively treats multidrug-resistant bacterial infections by utilizing photosensitizers to generate cytotoxic reactive oxygen species. Exploiting fluorescence resonance energy transfer (FRET) effect shows great potential for enhancing the efficacy of aPDT. Typically, this method involves encapsulating fluorescent molecules, including photosensitizers, into nanomaterials or coadsorbing them onto materials. Here, we develop a strategy that directly utilizes bacteria as carriers to bring two types of photosensitizers together to induce the FRET. We designed an aggregation-induced emission (AIE) photosensitizer (CPVBP3) and an aggregation-caused quenching (ACQ) photosensitizer (TPP3), both featuring the same bacterial membrane-targeting group to direct them to bacteria. Under white light exposure (12 J/cm2), the bactericidal effect of the combination of CPVBP3 and TPP3 at 5 µM each on Escherichia coli (4.7 log10) was much stronger than their individual use at 5 or 10 µM, highlighting synergistic antibacterial action. In Escherichia coli, TPP3 absorbed the fluorescence of CPVBP3, reducing its lifetime from 0.98 ns to 0.74 ns, confirming the occurrence of FRET. This combination also demonstrated a significantly stronger synergistic aPDT effect on Acinetobacter baumannii. Moreover, CPVBP3 synergized with methylene blue against Escherichia coli, indicating the universality of this strategy. Additionally, the efficacy and biosafety of this therapeutic approach were validated in a mouse wound model infected with Escherichia coli. In summary, this FRET strategy overcomes the limitations associated with the need for pre-binding photosensitizers with materials and the challenge of these mixtures penetrating bacteria (for greater damage), ultimately opening new avenues for further enhancing the efficacy of aPDT.

A novel fluorescent aptasensor based on H-shaped DNA nanostructure and hollow carbon-doped nitrogen nanospheres for sensitive detection of AFB1

The existence of aflatoxin B1 (AFB1) in food has a high carcinogenic effect on humans and animals. In this study, a fluorescent aptasensor for AFB1 detection was studied by designing a unique H-shaped DNA nanostructure and using novel hollow carbon-doped nitrogen nanospheres (HCNS) as the quenching material. The two DNA strands were hybridized to form the skeleton of the H-shaped DNA nanostructure, and the signal probe (S1-FAM) was paired with complementary bases to form the complete H-shaped DNA nanostructure. When AFB1 was absent, the S1-FAM was replaced by AFB1-Apt and was adsorbed by HCNS to generate a fluorescence resonance energy transfer effect (FRET), causing the signal to turn off. In the presence of AFB1, AFB1 specifically bound to AFB1-Apt to form a complex, which led to the stable formation of the S1-FAM into the H-shaped DNA nanostructure, resulting in the signal turn-on. Under the optimal conditions, an excellent linear relationship (R2 = 0.992) was observed between LgCAFB1 and fluorescent intensity ratio in the range of 0.05–500 ng/mL, and the detection limit was 0.023 ng/mL. The designed aptasensor platform was applied to analyze the spiked AFB1 in peanut, corn flour, wheat flour, wine, and black tea with recoveries ranging from 93.6% to 107.2%.

Superior Visible Photoelectric Response with Au/Cu2NiSnS4 Core-Shell Nanocrystals.

The incorporation of plasmonic metal nanostructures into semiconducting chalcogenides in the form of core-shell structures provides a promising approach to enhancing the performance of photodetectors. In this study, we combined Au nanoparticles with newly developed copper-based chalcogenides Cu2NiSnS4 (Au/CNTS) to achieve an ultrahigh optoelectronic response in the visible regime. The high-quality Au/CNTS core-shell nanocrystals (NCs) were synthesized by developing a unique colloidal hot-injection method, which allowed for excellent control over sizes, shapes, and elemental compositions. The as-synthesized Au/CNTS hybrid core-shell NCs exhibited enhanced optical absorption, carrier extraction efficiency, and improved photosensing performance owing to the plasmonic-induced resonance energy transfer effect of the Au core. This effect led to a significant increase in the carrier density of the Au/CNTS NCs, resulting in a measured responsivity of 1.2 × 103 AW-1, a specific detectivity of 6.2 × 1011 Jones, and an external quantum efficiency of 3.8 × 105 % at an incident power density of 318.5 μW cm-2. These results enlighten a new era in the development of plasmonic core-shell nanostructure-based visible photodetectors.

Fluorimetric determination of tetracycline antibiotics in animal derived foods using boron and nitrogen co-doped ceria-based nanoparticles.

Aninnovative synthesis of boron and nitrogen co-doped ceria-based nanoparticles (B/N-CeFNPs) with bright blue fluorescence emission is reportedusing the hydrothermal method. Based on the aggregation-induced emission enhancement (AIEE) effect between B/N-CeFNPs and chlortetracycline (CTC), a rapid detection method for CTC through fluorescence enhancement was developed. In addition, through the electron transfer process (ET), fluorescence resonance energy transfer (FRET) effect and static quenching between B/N-CeFNPs and oxytetracycline (OTC), a ratio fluorescence strategy for detecting OTC was generated. The fluorescence of B/N-CeFNPs at 410nm can be effectively quenched by OTC, and new fluorescence emission appears at a wavelength of 500nm. B/N-CeFNPs showed good linear responses with CTC and OTC in the range 0.1-1 µM and 1-40 µM, respectively. This system was used to simultaneously detect the CTC and OTC in milk and honey, realizing multi-residues detection of TCs in actual samples by using the same ceria-based fluorescence nanomaterial.

Fluorescence-Recovered Wearable Hydrogel Patch for In Vitro Detection of Glucose Based on Rare-Earth Nanoparticles.

The physiological state of the human body can be indicated by analyzing the composition of sweat. In this research, a fluorescence-recovered wearable hydrogel patch has been designed and realized which can noninvasively monitor the glucose concentration in human sweat. Rare-earth nanoparticles (RENPs) of NaGdF4 doped with different elements (Yb, Er, and Ce) are synthesized and optimized for better luminescence in the near-infrared second (NIR-II) and visible region. In addition, RENPs are coated with CoOOH of which the absorbance has an extensive peak in the visible and NIR regions. The concentration of H2O2 in the environment can be detected by the fluorescence recovery degree of CoOOH-modified RENPs based on the fluorescence resonance energy transfer effect. For in vivo detection, the physiological state of oxidative stress at tumor sites can be visualized through its fluorescence in NIR-II with low background noise and high penetration depth. For the in vitro detection, CoOOH-modified RENP and glucose oxidase (GOx) were doped into a polyacrylamide hydrogel, and a patch that can emit green upconversion fluorescence under a 980 nm laser was prepared. Compared with the conventional electrochemical detection method, the fluorescence we presented has higher sensitivity and linear detection region to detect the glucose. This improved anti-interference sweat patch that can work in the dark environment was obtained, and the physiological state of the human body is conveniently monitored, which provides a new facile and convenient method to monitor the sweat status.

A magnetic-enhanced FRET biosensor for simultaneous detection of multiple antibodies

Accurate, rapid and sensitive detection of specific immunoglobulin G (IgG) and immunoglobulin M (IgM) antibodies in human samples is crucial for preventing and assessing pandemics, especially in the case of recent COVID-19 outbreaks. However, simultaneous and efficient detection of IgG and IgM in a single system remains challenging. Herein, we developed a multicolor nanosystem capable of quantitatively analyzing anti-SARS-CoV-2 IgG and IgM with high sensitivity within 20 ​min. The detection system consists of core-shell upconversion nanoparticles (csUCNPs), secondary antibodies labeled with fluorescent dyes (sab), and magnetic nanocrystals (PMF). By leveraging the Förster resonance energy transfer (FRET) effect, the photoluminescence (PL) intensity of blue and green regions is restored for IgG and IgM detection, respectively. Inspiringly, owing to the introducing of PMF, the limits of detection (LODs) of IgG and IgM tested are improved to 89 ​fmol ​L−1 and 19.4 ​fmol ​L−1, representing about 416-folds and 487-folds improvement over only-dye dependent system, respectively. Mechanistic investigations reveal that the high collective effect and surface energy transfer efficiency from csUCNPs to PMF contribute to the enhanced detection sensitivity. The assay enables us to quantify clinical vaccinated samples with high specificity and precision, suggesting our multicolor platform can be a promising alternative for clinical point-of-care serological assay.

A novel “on-off-on” electrochemiluminescence strategy based on RNA cleavage propelled signal amplification and resonance energy transfer for Pb2+ detection

BackgroundLead (Pb) is one of the most toxic heavy-metal pollutants. Additionally, lead ions (Pb2+) can accumulate in the human body through the food chain, causing irreversible damage through organ damage and system disorders. In the past few years, the detection of Pb2+ has mainly relied on instrumental methods such as atomic absorption spectroscopy (AAS) and inductively coupled plasma mass spectrometry (ICP-MS). Nonetheless, these techniques are complicated in terms of equipment and procedures, along with being time-intensive and expensive in terms of detection. These drawbacks have limited their wide application. Hence, there is a pressing need to develop detection techniques for Pb2+ that are not only cost-efficient but also highly sensitive and specific. ResultsA novel “on-off-on” electrochemiluminescence (ECL) sensor for detecting Pb2+ was developed based on the resonance energy transfer (RET) effect between AuNPs and boron nitride quantum dots (BN QDs) and the recognition of Pb2+ by DNAzyme along with the cleavage reaction of the substrate chain. Poly(6-carboxyindole)/stannic sulfide (P6ICA/SnS2) nanocomposite was employed as a co-reaction accelerator to consequently facilitate the production of intermediate SO4•−. This effective enhancement of the reaction led to an improved ECL intensity of BN QDs and enabled the sensor platform to exhibit a higher original ECL response. Benefiting from the combination of the DNAzyme signal amplification strategy with the “on-off-on” design, the ECL sensor showed satisfactory selectivity, good stability, and high sensitivity. This ECL sensor exhibited a linear detection range (LDR) of 10−12-10−5 M and a limit of detection (LOD) of 2.6 × 10−13 M. SignificanceIn the present work, an “on-off-on” ECL sensor is constructed based on RET effect for ultrasensitive detection of Pb2+. P6ICA/SnS2 was investigated as the co-reaction accelerator in this sensor. Moreover, this ECL sensor exhibited excellent analytical capability for detecting Pb2+ in actual water samples, providing a method for detecting other heavy metal ions as well.

Construction of a three-mode sensor based on gold nanoparticles and carbon quantum dots as probes for the detection of thiosemicarbazone.

In this study, ginkgo leaves were used as a carbon source to synthesize carbon quantum dots (CQDs) with uniform particle size, high fluorescence (FL) intensity and strong stability, using a hydrothermal method. FL could be quenched by the FL resonance energy transfer effect between CQDs and gold nanoparticles (AuNPs), an important FL quenching agent. The electrostatic attraction between thiosemicarbazone (TSC) and citrate on the surface of AuNPs and the formation of a stable Au-S bond between TSC and AuNPs led to the aggregation of AuNPs and thus weakened the quenching effect on CQDs and partly recovered the FL. A sensor in FL mode for the detection of TSC was constructed based on the above-mentioned FL "off" and "on" phenomena. The results showed a good linear correlation in the concentration range 0-1.75 μM, and the limit of detection was as low as 0.05 μM. In addition, the aggregation of AuNPs caused by TSC also led to a change in the absorbance curve and color of the solution; colorimetric and chrominance detection modes were also constructed using these two types of changes, with sensitive responses ranging 0-2.25 μM and 0-1.60 μM and the limits of detection of 0.03 μM and 0.08 μM, respectively. More importantly, these three detection modes obtained satisfactory recovery rates in the detection of the TSC content in river water, liquor and wheat samples, and the detection results were mutually verified (95.18% to 104.96%).

Ultrasensitive fluorescence immunoassay of pepsinogen I based on enzyme-triggered decomposition of AuNCs/MnO2.

Gastric cancer is a prevalent malignant tumor of the gastrointestinal tract accompanied by a high mortality rate; therefore, early gastric cancer screening is critical for improving patient survival. In this study, we present a facile fluorescence immunoassay for highly sensitive screening of pepsinogen I (PG I) based on a one-pot biomimetic mineralization process for the synthesis of gold nanocluster-anchored manganese dioxide (AuNCs/MnO2) nanosheets. MnO2 first quenches the fluorescence of AuNCs through the Förster resonance energy transfer effect, whereas the introduction of ascorbic acid (AA) leads to the decomposition of MnO2 and rapidly recovers the fluorescence of AuNCs. Based on the above principles and phenomena, we developed a sensitive fluorescence immunoassay for the in situ generation of AA to detect PG I. Specifically, in the presence of PG I, the sandwich-type immunoreactivity-enriched alkaline phosphatase-labeled secondary antibody catalyzes the production of AA from the substrate, which enhances the fluorescence intensity. Under optimized conditions, the fluorescence intensity increased linearly with the concentration of PG I (0.05 to 200 ng mL-1) with a limit of detection (LOD) of 0.013 ng mL-1 (S/N = 3). The designed sensing platform has good stability (more than one year) and excellent anti-interference capability and demonstrates satisfactory accuracy for detection in real samples compared to commercial ELISA kits.

Encoding fluorescence intensity with tetrahedron DNA nanostructure based FRET effect for bio-detection

Biocoding technology constructed by readable tags with distinct signatures is a brand-new bioanalysis method to realize multiplexed identification and bio-information decoding. In this study, a novel fluorescence intensity coding technology termed Tetra-FICT was reported based on tetrahedron DNA nanostructure (TDN) carrier and Főrster Resonance Energy Transfer (FRET) effect. By modulating numbers and distances of Cy3 and Cy5 at four vertexes of TDN, different fluorescence intensities of twenty-six samples were produced at ∼565.0 nm (FICy3) and ∼665.0 nm (FICy5) by detecting fluorescence spectra. By developing an error correction mechanism, eleven codes were established based on divided intensity ranges of the final FICy3 together with FICy5 (Final-FICy3&FICy5). These resulting codes were used to construct barcode probes, with three miRNA biomarkers (miRNA-210, miRNA-199a and miRNA-21) as cases for multiplexed bio-assay. The high specificity and sensitivity were also demonstrated for the detection of miRNA-210. Overall, the proposed Tetra-FICT enriched the toolbox of fluorescence coding, which could be applied to multiplexing biomarkers detection.

A label-free ratiometric fluorescent aptasensor based on a peroxidase-mimetic multifunctional ZrFe-MOF for the determination of tetrodotoxin.

A Fe/Zr bimetal-organic framework (ZrFe-MOF) is utilized to establish a ratiometric fluorescent aptasensor for the determination of tetrodotoxin (TTX). The multifunctional ZrFe-MOF possesses inherent fluorescence at 445nm wavelength, peroxidase-mimetic activity, and specific recognition and adsorption capabilities for aptamers, owing to its organic ligand, and Fe and Zr nodes. The peroxidation of o-phenylenediamine (OPD) substrate generates fluorescent 2,3-diaminophenazine (OPDox) at 555nm wavelength, thus quenching the inherent fluorescence of ZrFe-MOF because of the fluorescence resonance energy transfer (FRET) effect. TTX aptamers, which are absorbed on the material surface without immobilization or fluorescent labeling, inhibit the peroxidase-mimetic activity of ZrFe-MOF. It causes the decreased OPDox fluorescence at 555nm wavelength and the inverse restoration of ZrFe-MOF fluorescence at 445nm wavelength. With TTX, the aptamers specifically bind to TTX, triggering rigid complex release from ZrFe-MOF surface and reactivating its peroxidase-mimetic activity. Consequently, the two fluorescence signals exhibit opposite changes. Employing this ratiometric strategy, the determination of TTX is achieved with a detection limit of 0.027ng/mL and a linear range of 0.05-500ng/mL. This aptasensor also successfully determines TTX concentrations in puffer fish and clam samples, demonstrating its promising application for monitoring trace TTX in food safety.

3D walkable DNA gears for ultrasensitive detection of multiple microRNAs in lung cancer cell lysates

As a tumor biomarker with therapeutic application potential, microRNA (miRNA) was crucial for the accurate and sensitive detection of early-stage tumors. Herein, a unique three dimensional (3D) DNA nanomachine (DNM) was created, which was capable detecting lung cancer-related biomarkers miRNA-21, miRNA-205 and miRNA-125b in lung cancer cell lysates with extreme sensitivity. The 3D DNM was composed of DNA scissors and three flexible walkable DNA gears modified with various species of silver nanoclusters (AgNCs). Based on the flexibility of DNA scissors and the walkability of DNA gears, neighboring DNA gears closed the distance between different species of AgNCs by walking in the presence of targets, generating fluorescence resonance energy transfer (FRET) effect and emitting different kinds of fluorescence to complete the highly sensitive detection of single targets and multiple targets. The findings demonstrated that a linear model provided an excellent match for the association between fluorescence signal and target miRNAs. For miRNA-21, miRNA-205, and miRNA-125b, the limits of detection (LODs) (signal/noise = 3) were 4.2 pmol/L (pM), 6.3 pM, and 10.2 pM, respectively. Their recoveries in A549 cell lysate samples ranged from 95.3 to 108.8 % with relative standard deviations of 1.26 %–4.88 %. Satisfactorily, the 3D DNM displayed exceptional analytical performance with high sensitivity and stability, strong specificity and reproducibility, which was triumphantly employed to identify miRNAs in tumor cell lysates, providing a workable technique in creating adaptable nanostructure for dependable bioanalysis and clinical diagnosis of cancer biomarkers.

A bubble-enhanced lanthanide-doped up/down-conversion platform with tumor microenvironment response for dual-modal photoacoustic and near-infrared-II fluorescence imaging

As an important tumor diagnosis strategy in precision medicine, multimodal imaging has been widely studied. However, the weak imaging signal with low spatial resolution and the constant signal of lack of specific activation severely limit its disease diagnosis. Herein, a bubble-enhanced lanthanide-based up/down-conversion platform with tumor microenvironment response for dual-mode imaging, LDNP@DMSN-Au@CaCO3 nanoparticles (named as LDAC NPs) were successfully developed. Combining the advantages of photoacoustic imaging (PAI) and the second near-infrared window (NIR-II) fluorescence imaging (FI), significantly improved the accuracy of diseases diagnosis. LDAC NPs with flower-like structure were synthesized through the encapsulation of uniform lanthanide-doped nanoparticles (NaYbF4:Ce,Er@NaYF4 named LDNPs) with dendritic mesoporous silica (DMSN). The gold nanoparticles (Au NPs) were then in situ grown on the surface of DMSN and the surface were finally coated with a layer of calcium carbonate (CaCO3). Under the excitation of the 980 nm laser, LDNPs showed strong emission of NIR-II at 1550 nm due to the doping of Ce and Er ions, showcasing excellent spatial resolution and deep tissue penetration characteristics, while the resulting visible light emission (540 nm) enables Au NPs to generate PAI signals with the aid of LDNPs via the fluorescence resonance energy transfer effect. In acidic tumoral environment, CaCO3 layer could produce CO2 microbubbles, and the PAI signals of LDAC NPs could be further enhanced with the generation of CO2 bubbles due to the bubble cavitation effect. Simultaneously, the NIR-II FI of LDAC NPs was self-enhanced with the degradation of the CaCO3. This intelligent nanoparticle with stimulus-activated dual-mode imaging capability holds great promise in future precision diagnostics.