Resistance Behavior Research Articles

The Impact of Non‐Monolithic Semiconductor Capacitance on Organic Electrochemical Transistors Performance and Design

AbstractThe existing device models for organic electrochemical transistors (OECTs) fail to provide any device design guidelines for optimized performance parameters such as transconductance that are pivotal for the applications OECTs in sensing. Moreover, the current models are based on the questionable assumption of a homogenous organic semiconductor layer, and all predict a linear behavior of the resistance with the OECT channel length. Consequently, the experimentally observed nonlinear resistance behavior in OECTs has been overlooked thus far. Here, an OECT device model is developed that accurately describes the nonlinear behavior of the OECT channel resistance and offers the first guidelines for maximizing transconductance. The model is inherently nonlinear and the nonlinearity stem from the non‐monolithic capacitance of the organic semiconductor layer. Moreover, the model provides a consistent and reliable estimations for the contact resistance in OECTs. The success of the model in accurately describing and providing predictions of the OECT operation by relating the device's geometrical parameters with electrochemical parameters of the semiconductor layer paves the way toward unlocking OECT potentials in diverse applications, from biosensing to neuromorphic computing and flexible electronics.

Research on the Effect of Microstructure Modulation on the Corrosion Resistance Behaviour of L-PBF alloy 718

Abstract The micro-structures and corrosion behavior of laser powder bed fusion (L-PBF) alloy 718 (power 140W, speed 800 mm/s) after various heat treatments (650 °C, 940 °C, and 1020 °C) were investigated by electrochemical analysis. The result shows that as-received samples, the most prone to pitting corrosion is melt-pool boundary (MPB). The heat treatment at 940°C demonstrates the best corrosion resistance due to the precipitation of a considerable number of needle-like and short rod-like δ phases. This indirectly reduces the dislocation density and defect density of the passivate film, resulting in improved stability and corrosion resistance.

Research Progress on the Relationship Between Microstructure and Properties of AISI 321 Stainless Steel

AISI 321 stainless steel is widely used in chemical pipelines and nuclear power, prompting research on its high-temperature performance and corrosion resistance. This review focuses on the effects of alloy elements, second-phase particle formation, and heat treatment processes on the microstructure and properties of AISI 321 stainless steel. Fine tuning of alloying elements can affect the mode and effect of dynamic recrystallization, altering the high-temperature flow deformation of AISI 321 stainless steel. In order to achieve phase equilibrium, the relationship between corrosion resistance and high-temperature creep behavior and high-temperature mechanical behavior in the presence of second-phase particles was also analyzed. This review outlines the basic heat treatment procedures for improving material properties, providing a new perspective for solution treatment and improving corrosion resistance. In addition, the latest research progress on other factors affecting the high-temperature performance of AISI 321, such as coatings, was briefly introduced.

The Influence of In-Mould Annealing and Accelerated Ageing on the Properties of Impact-Modified Poly(Lactic Acid)/Biochar Composites

In the last few decades, a large number of natural additives have been analysed in connection with the improvement of the properties of poly(lactic acid) (PLA) bioplastic materials. This article comprehensively analyses the applicability of a highly stable and progressive multifunctional additive produced from renewable resources—biochar. The effect of biochar on the structural development and various thermo-mechanical properties was evaluated as a function of the biochar size and volume, addition of an impact modifier and in-mould annealing during injection moulding. In addition, the effect of accelerated ageing on the change in properties was also analysed. The evaluated results showed a significant influence of the particle size and biochar content on the properties of PLA biocomposites. However, the crucial aspect was the production process with a higher mould temperature and longer production time. Consequently, the effect of additives with adjusted processing worked synergistically on the performance of the resulting biocomposites. The accelerated ageing process did not induce any significant changes in the mechanical, impact and heat resistance behaviour of neat PLA. On the other hand, significant effects on the behaviour of the modified PLA biocomposites were observed. Impact-modified PLA achieved a toughness of 28 kJ/m2, an increase of 61% compared to neat PLA. Similar observations were made when submicron biochar was incorporated into the PLA matrix (a 22% increase with PLA/5B1). These increases were even more pronounced when injected into a 100 °C mould. Due to the synergistic effect, excellent impact toughness results of 95 kJ/m2 (a 428% increase) were achieved with PLA/IM/5B1. Moreover, these results persisted even after accelerated ageing.

Exploring the impacts of liquid accelerators on sulfate resistance and calcium leaching behavior of wet-mixed shotcrete

The performance of shotcrete used in underground tunnel construction is often compromised by the challenging service environment, causing severe deterioration and structural integrity concerns. Developing high-quality accelerating agents can be a viable approach to mitigate this effect. This study formulates alkali-free fluorine-free (AF-I); alkali-free fluorine-containing (AF-II); and low-alkaline (AC) liquid accelerators and explores their impacts on sulfate resistance and calcium leaching behavior of shotcrete, utilizing semi-immersion and short-term tank water testing protocols on a time-resolved basis. Microstructural analysis of eroded shotcrete was conducted employing XRD, TGA and SEM to reveal underlying mechanisms. Additionally, ionic analyses of simulated leaching systems, including groundwater and 5% sodium sulfate solution were performed using ICP-OES to monitor calcium activity and assess leaching behaviors. Results indicate that shotcrete accelerated with AF-II exhibits the strongest resistance, whereas shotcrete with AC suffers the severest deterioration. The primary deterioration mechanism of shotcrete with AC was majorly due to high ettringite and gypsum corrosion, whereas AF-I and AF-II induces little ettringite corrosion. In terms of leaching behavior, AF-II demonstrates superior calcium leaching mitigation, with leachability indices in groundwater and sodium sulfate solution measuring 0.06 and 0.19, and 0.02 and 0.16 higher values, respectively, compared to AF-I and AC. Findings of this study provide valuable insights into the application and performance of shotcrete in sulfate-prone environments, aiming to mitigate potential deterioration through optimal accelerator selection.

Corrosion resistance and wear behavior of CoCrFeNiMn@Gr high entropy alloy-based composite coatings prepared by laser cladding

In this study, we utilize laser cladding to apply a CoCrFeNiMn HEA with 2 wt.% few-layer graphene (Gr) coating onto the surface of Q235B mild steel. Alcohol stirring method was used for HEA and Gr preparation of composite powder. Raman spectroscopy and energy dispersion spectroscope (EDS) indicate the successful mixing of HEA and Gr powders, with Gr adhering to the surface of the HEA powder in a lamellar structure. The X-ray diffraction (XRD), scanning electron microscope (SEM), EDS, and Electron backscatter diffraction (EBSD) analyses revealed that grain refinement and the formation of fine carbide-hard phases in the HEA/Gr coating improve microhardness and wear resistance. The average Schmidt factors of the coating decreased from 0.47 to 0.45 with the addition of Gr, indicating enhanced resistance to plastic deformation and anisotropy. Nanoindentation experiments demonstrated that the HEA/Gr coatings exhibit superior resistance to plastic deformation, effectively enhancing the coating’s durability against spalling under stress and wear conditions. The microhardness of the HEA/Gr coating increased by 99.25%, and the wear rate decreased by 86.31% compared to the HEA coating alone. The open circuit potential (OCP), linear polarization curve, Tafel curves, electrochemical impedance spectroscopy (EIS), and Mott-Schottky tests all indicated that the HEA/Gr coating possesses superior corrosion resistance. X-ray Photoelectron Spectroscopy (XPS) results suggest that the passivation film of the HEA/Gr coating, which contains more oxides and less hydroxide, is more protective and denser, thereby slowing the corrosion rate.

Functional Roles of Long Non-coding RNAs on Stem Cell-related Pathways in Glioblastoma

: Long non-coding RNAs (lncRNAs), characterized by their length exceeding 200 nucleotides and lack of protein-coding capacity, are intricately associated with a wide array of cellular processes, encompassing cell invasion, differentiation, proliferation, migration, apoptosis, and regeneration. Perturbations in lncRNA expression have been observed in numerous diseases and have emerged as pivotal players in the pathogenesis of diverse tumor types. Glioblastoma, a highly malignant primary tumor of the central nervous system (CNS), remains a formidable challenge even with the advent of novel therapeutic interventions, as primary glioblastomas invariably exhibit therapy resistance and aggressive behavior. Glioblastomas can arise from progenitor cells or neuroglial stem cells, revealing profound cellular heterogeneity, notably in the form of glioblastoma stem cells (GSCs) possessing stem-like properties. Glioblastomas comprise neural precursors that harbor essential characteristics of neural stem cells (NSCs). Several signaling pathways have been implicated in the regulation of self-renewal in both cancer cells and stem cells. In addition to their involvement in therapy resistance and survival of glioblastoma, lncRNAs are implicated in the modulation of GSC behaviors through diverse pathways and the intricate regulation of various genes and proteins. This review aims to comprehensively discuss the interplay between lncRNAs, their associated pathways, and GSCs, shedding light on their potential implications in glioblastoma.

Evaluation of the Effect of Static and Flowing Conditions on the Corrosion Behavior of the Hull of Marine Ships

Marine ship hulls' corrosion resistance behavior under static and flowing conditions was investigated. The metal of the hull panels of marine ships was chemically and mechanically examined and analyzed, revealing that carbon steel type DIN 1.0501 C35 is employed in constructing the hull of ships in the port of Basrah in Iraq. A corrosion resistance test for this metal was carried out in laboratory-prepared seawater under static and flowing conditions at a flow rate of 1500 liter/hour and various immersion times (12, 24, 48, 120, 168, 336) hours. The temperature was kept constant at 30°C, and a fixed salt concentration of (3.5% sodium chloride). The corrosion rate of C35 carbon steel was calculated using the weight loss method is an effective method for calculating the corrosion rate of carbon steel. The samples were examined using a scanning electron microscope (SEM) for corrosion analysis. Conclusions from this research indicate that an increase in the flow rate resulted in an elevation of the corrosion rate, doubling the corrosion rate compared to samples under static conditions. The corrosion rate exhibited a significant increase during the first 24 hours, followed by a gradual decrease with increasing immersion time. The corrosion rate increased by 682.9%. The speed of corrosion was fast initially, but the weight loss slowed after 24 hours of immersion. A scanning electron microscope (SEM) examination revealed that the flow environment was aggressive for carbon steel. It was much more severe, and the pits and grooves were more significant than the static condition.

Effect of Ce co-doping on radiation resistance behavior and laser performance of Er/Yb/Ce co-doped high-phosphorous polarization-maintaining silica fiber

Er/Yb/Ce co-doped high-phosphorus silica fiber core glasses with varying Ce2O3 concentrations were prepared and systematically studied. Based on this research, optimized Er/Yb/Ce co-doped high-phosphorus polarization-maintaining silica fibers were subsequently fabricated using the modified chemical vapor deposition (MCVD) technique and hole drilling method. The study confirmed that there is an optimal range of Ce doping concentrations for spectral performance, Ce doping effectively suppressing the formation of P-related defects during X-ray irradiation, and the dynamic valence state transformation of Ce3+/Ce4+ ions during irradiation enhanced the radiation-resistant properties, as demonstrated through radiation-induced absorption (RIA), electron paramagnetic resonance (EPR), and L3-edge X-ray absorption near edge structure (XANES) spectra. The homemade fiber, with optimized element concentrations, exhibited high laser efficiency comparable to commercial high-power fibers. Furthermore, the radiation-induced background loss of the fiber was 0.16 dB/m under 60 krad γ-rays at a low dose rate of 100 rad/h, and the radiation-induced gain variation (RIGV) was 0.019 dB/krad.

Investigation of the Softening Resistance Behavior and Its Mechanism in Cu-Ni-Si Alloys with Discontinuous Precipitates

In this study, isothermal annealing experiments were conducted on copper-nickel-silicon alloys containing continuous precipitates (CP) and discontinuous precipitates (DP) to investigate the effects of different types of precipitate phases on the microstructural evolution and softening temperature during annealing, as well as to analyze the differences in softening mechanisms. The experimental results revealed that the softening temperature of the CP alloy, subjected to 75% cold deformation, was 505 °C. In contrast, the DP alloy achieved softening temperatures of 575 °C and 515 °C after 75% and 97.5% cold deformation, respectively. This indicates that the DP alloy exhibits significantly superior softening resistance compared to the CP alloy, attributed to the distinct softening mechanisms of the two alloys. In the CP alloy, softening is primarily influenced by factors such as the coarsening of the precipitate phase, the occurrence of recrystallization, and the reduction in dislocation density. In the DP alloy, the balling phenomenon of the DP phase is more pronounced, and its unique microstructure exerts a stronger hindrance to dislocation and grain boundary motion. This hindrance effect reduces the extent of recrystallization and results in a smaller decrease in dislocation density. In summary, the DP alloy, due to its unique microstructure and softening mechanisms, demonstrates better softening resistance, providing higher durability and stability for high-temperature applications.

The preparation and construction of biomimetic mineralization compatible interface of wood fiber/foamed magnesium oxychloride lightweight composites

The purpose of this study is to improve the application performance of foamed magnesium oxychloride cement (FMOC) and solve the problem of poor interfacial compatibility between the organic-inorganic interface of traditional inorganic composite materials. Inspired by the adhesion mechanism of barnacles to inorganic substrates through amyloid nanofibers and phosphoprotein, a simple green method was proposed to improve the strength and water resistance of the system. The FMOC composites (30×30×30 mm) were prepared by adding wood flour (WF) and phytic acid (PA) to the mixture of magnesium oxide and magnesium chloride. The influences of WF and PA on the compressive strength, composition, microstructure, pore structure, water resistance and flame retardant properties of FMOC were investigated. WF was used as a skeleton structure to induce cement particle aggregation, the PA molecule was used as a connecting bridge to activate the fiber skeleton to increase the active sites, and promote crystal nucleation and aggregation through hydrogen and ionic bond interactions to construct the biomimetic mineralized structure. The results show that the introduction of PA improves the compressive strength and water resistance of the FMOC/WF/PA composite system. When the PA addition amount is 0.8 %, the compressive strength of FMOC/WF/PA-0.8 % composites reached 6.64 MPa, which was 3 times compared to the FMOC composites. The softening coefficient and water absorption of the obtained FMOC/WF/PA-0.8 % composites were 0.81 and 13.84 %, respectively, which were superior to FMOC composites and presented better behavior in water resistance. Meanwhile, the modified composites have more stable pore structure and flame retardant properties, thus these green FMOC/WF/PA composites displayed potential application value in building energy conservation, aerospace and other fields.

Functionalized polyaniline nanofibrils on lamellar structured zirconium for effective bone mineralization

The surface physiology of certain implant material has the ability to promote implant–cell signalling process through which a stable environment is formed. The formation of this favourable environment hastens the process of biomineralization and regeneration. In this context, Zirconium (Zr) when treated with alkali undergoes a surface modification which results in the development of a lamellar structured Zirconium (ATZ). Further, encapsulation of polyaniline (PAni) on ATZ was achieved through the electropolymerization technique which results in an effective and homogeneous electrodeposition of PAni nanofibrils on ATZ surface. A high resolution scanning electron microscope analysis (HR-SEM), phase analysis and functional group analysis were carried out confirming the semi-crystalline PAni nanofibrils braided on the ATZ surface. Potentiodynamic polarization studies of the coated sample exhibited higher Ecorr (−0.060 V) and lower icorr (0.007 µA/cm2) values signifying its better corrosion resistance behaviour in higher potentials coupled with lower electrochemical activity in the SBF medium. The porosity of PAni/ATZ nanofibril was 0.007 % and it provides an effective platform for implant-tissue attachment. The In-vitro biomineralization studies proved the bioactivity of PAni/ATZ which forms well-matured HAp spherules over the surface. Further, hemocompatibility studies of PAni/ATZ expressed a hemolytic rate of ∼0.39 % which denotes it’s biocompatible and non-hemolytic behaviour with the blood cells. Further, the coated sample on gram-positive and gram-negative bacteria causes demise of bacterial cell wall and exhibits higher inhibition percentage. In addition, a standard MTT assay of PAni/ATZ provides an effective support in maintaining cell viability and aids in proliferation of MG-63 cells. Thus, the results demonstrate that the nanoscale surface architecture of PAni/ATZ could serve as a potential and conducive environment for bone-implant interaction on the implant material for better osseointegration.

Effect of milling time on structural and electrical properties of thermomechanically synthesized of Ba0.1 (Bi0.45Na0.45)TiO3 nanoceramics for ferroelectric random-access memory device

Lead-free Ba0.1(Bi0.45Na0.45)TiO3 (BBNTO) nanoceramics were synthesized using high-energy ball milling, followed by a solid-state reaction method. XRD analysis of the microstructure indicated the formation of tetragonal symmetry. The crystallite size of the nanoceramic powder decreased from ∼ 28 nm to 10 nm after milling for 0, 30, 60, and 90 hours. The dielectric properties of the nanoceramics showed significant improvement, with a diffuse phase transition occurring around 80 °C). The dielectric constant increased with temperature across various frequencies, reached a maximum value at approximately at temperature ∼ 380 °C. At lower temperatures and higher frequencies, the relative permittivity and tangent loss depend on the crystallite size and milling duration. Impedance spectroscopy data analysis revealed size-dependent impedance characteristics and dielectric relaxation. The ac conductivity plot adhered to the Arrhenius relation, and the calculated activation energy confirmed the negative temperature coefficient of resistance (NTCR) behavior. P-E loops confirmed ferroelectric properties, indicating potential for use in future ferroelectric-based storage devices.

Impact of Virtual Reality Intervention on Anxiety and Level of Cooperation in Children and Adolescents with Autism Spectrum Disorder during the Dental Examination.

Background: Individuals with Autism Spectrum Disorder (ASD) frequently encounter increased levels of anxiety and display resistant behaviors during dental examinations, which negatively affects their oral care and maintenance. This study employed a cross-sectional design to evaluate the impact of virtual reality (VR) intervention on the anxiety and level of cooperation in children and adolescents with ASD during dental examinations. Methods: A total of 140 participants diagnosed with ASD, aged from 4- to 18-years-old, were selected from two specialized ASD management centers in Riyadh/Saudi Arabia. The participants were randomly allocated into either the control group or the VR group. Control group participants were subjected to a conventional dental examination, while the VR group utilized VR intervention to immerse themselves in a simulated natural and soothing environment. The Venham anxiety and behavior scale (VABS) was utilized to measure anxiety levels, while the Frankl behavior rating scale (FBRS) was employed to assess the level of cooperation. Data were analyzed using a Mann-Whitney U test with a significance level of p < 0.05. Results: The baseline anxiety and level of cooperation between the groups were comparable (p > 0.05). During the dental examination, the VR group had significantly reduced anxiety scores (2.48 ± 1.76) compared to the control group (1.50 ± 1.74) (p < 0.001). Regarding the level of cooperation, the VR group exhibited significantly greater levels of cooperation (3.41 ± 0.96) than the control group (2.86 ± 1.03) (p = 0.002). Conclusions: These findings suggest that VR intervention is a successful technique for decreasing anxiety and enhancing cooperation among children with ASD during dental examination. Integrating VR technology in dental environments can potentially improve the dental experience and results for children diagnosed with ASD.

A curcumin quantum dot blended polyacrylonitrile electrospun nanofiber coating on 316 L SS for improved corrosion resistance in the marine environment.

Corrosion of 316 L SS is a significant global concern and recently polymeric nanofibers have been gaining attention for their potential in enhancing the corrosion resistance of metals. In this work, an electrospinning technique was deployed for the deposition of a curcumin quantum dot (CMQD) blended polyacrylonitrile (PAN) nanofibrous anticorrosive coating on 316 L SS. The optimized PAN-CMQD coated samples obtained from the weight loss studies were examined to assess their corrosion inhibition characteristics in 3.5 wt% NaCl electrolyte as the corrosion environment using potentiodynamic polarization and electrochemical impedance spectroscopy. The PAN-CMQD coated samples showed two-order reduction in I corr compared to the uncoated 316 L SS. The results of the long-term analysis for 30 days revealed no significant changes in I corr and E corr values and no pit formation for PAN-CMQD coated samples, proving the longevity of the coating. Thus, this work will serve as a cost-effective futuristic strategy for the large-scale development of anticorrosive nanofibrous coatings for enhancing the corrosion resistance behavior of metals and alloys in various industrial sectors.

8788 Implications of NTRK gene fusion in Papillary thyroid cancer

Abstract Disclosure: W. Medina-Torres: None. L. El Musa Penna: None. J. Segarra-Villafane: None. L.R. Sepulveda-Garcia: None. Z. Maisonet -Feliciano: None. I.C. Arroyo: None. M. Ramirez: None. M. Alvarado: None. L.A. Gonzalez-Rodriguez: None. V.J. Carlo: None. Thyroid cancer (TC) is the most common endocrine cancer. Papillary thyroid carcinoma (PTC) is the predominant contributor of this occurrence, comprising approximately 80% of all thyroid carcinomas. PTC has a good prognosis with a 5-year survival rate of more than 90% after resection. Nonetheless, factors such as tumor size, multifocality, nodal and distant metastases, characterize more aggressive cases including tall cell variant, columnar cell variant, and hobnail variant Aside from staging parameters, PTC behavior is mostly determined by morphologic variant. This is the case of 31 y/o female without known past medical history who was evaluated at endocrinology clinic due to a fine needle thyroid aspiration (FNA) positive for PTC, tall cell variant. Total thyroidectomy with central compartment dissection was performed. Pathology report presented a main tumoral mass of 3 cm but permeating multinodular pattern involving the entire gland with focal extrathyroidal extension, positive margins and six level VI positive lymph nodes. As per report, the tumor presented both papillary and follicular patterns of growth and other findings including oncocytic change, foci of clear cell change, low mitotic rate, and most notably "reverse polarization”. This pattern has the pathological features suggestive of the novel NTRK gene fusion mutation. The patient was treated with radioactive iodine (RAI) and one year post treatment there was evidence of elevated Thyroglobulin level at 904 ng/mLand thyroglobulin Ab at 2.48 IU/mL. A WBS +SPECT was done resulting in small uptake at left posterior thyroid bed and pulmonary intake. A chest CT revealed multiple bilateral sub centimeter nodules. Based on this result, a second course of RAI was given. Follow up neck ultrasound and chest CT presented persistent left level VI lymph nodes, increased amount of bilateral sub-centimeter pulmonary nodules and new thoracic(T11) lesion. FNA of left neck lymph nodes were positive for metastatic PTC for which left neck dissection was performed. Evaluation for actionable somatic mutations was requested based on resistance behavior, remarkable for TRIM33-NTRK1 chromosomal rearrangement. Patient was evaluated by Oncology service who started Larotrectinib treatment since it was approved for NTRK driven malignancies. Six-month post therapy patient achieved clinical and biochemical improvement. In the thyroid, NTRK-driven malignancies are rare and aggressive but treatable, in the evolving genomic era. As reviewed in the literature, NTRK fusion-positive TC exhibits distinctive clinicopathological features that could aid in identifying potential patients. Thus, in such patients who have PTC with non-classic pathologic patterns, specific molecular profile of the main tumor may have significant prognostic value that must be integrated into stratification system in order to provide target therapy on time. Presentation: 6/3/2024

Decoding algorithm fatigue: The role of algorithmic literacy, information cocoons, and algorithmic opacity

Algorithmic technologies are dominating our online experiences, from content recommendations to personalized services. However, it also introduces a new challenge: algorithm fatigue. Algorithm fatigue describes the phenomenon where users experience mental and emotional exhaustion in prolonged interaction with algorithms. To decode this phenomenon, we explored personal and technical antecedents of algorithm fatigue and its impact on user behavior. Using data collected from 393 users of algorithm-driven applications, we identified three key drivers of algorithm fatigue: algorithmic literacy (understanding how algorithms work), information cocoons (being exposed to repetitive content), and algorithmic opacity (a lack of transparency in how algorithms make decisions). Interestingly, while greater algorithmic literacy is often thought to enhance user satisfaction, our findings suggest it actually exacerbates fatigue. Both information cocoons and algorithmic opacity also contribute to algorithm fatigue, highlighting the need for diverse content and transparent algorithm designs. Additionally, we found a strong link between algorithm fatigue and resistance behavior, with fatigued users more likely to resist algorithmic recommendations. Overall, this study suggests developers and policymakers design more user-centric algorithms that not only excel in personalization but also reduce potential fatigue and resistance in algorithmic interactions.

Investigation of the electrical quality and long-term stability of aluminum ground stud connections in automotive applications

The rapid advancement in the electrification of modern vehicles has led to a continuous increase in electrical consumers for various comfort and safety functions. Ground studs serve as the electrical interface between the conductive vehicle body and the onboard network. Drawn arc stud welding is an economical and established joining process for producing ground stud joints. The circuits in the onboard network are increasingly subject to greater demands regarding current-carrying capacity and long-term stability. Reliable signal and power transmission require minimal contact resistance at the electrical connection points of the ground stud system and must withstand various operating and environmental conditions over the entire service life. In this study, a ground stud made of AlMg5, with a ZnNi-coated steel cap nut was used on a 2.0 mm thick sheet of AlMg3. The electrical connection of the ground studs was made using tinned copper cable lugs and 35 mm² cables. To analyze the electrical resistance behavior in an accelerated test, the ground studs were subjected to a superimposed load with a cyclic current profile for 1008 hours under changing climatic conditions. The results show that under the chosen operational and environmental conditions, accelerated aging and intermittent resistance behavior occur. A characteristic drop in resistance during the test indicates the failure point of the electrical connection. The cause of failure can be attributed to media penetration into the electrical contact zone. A failure of the electrical connection was observed after 512 hours.

Comprehensive evaluation of corrosion resistance and biocompatibility of ultrafine-grained TiMoNb alloy for dental implants

To address the limited wear resistance observed in traditional titanium alloys, we have developed an ultrafine-grained equiatomic TiMoNb compositionally complex alloy (CCA) with exceptional wear resistance. However, there is a significant lack of in vitro and in vivo evaluation of the TiMoNb CCA for biomedical applications. In this study, we comprehensively evaluate the corrosion behavior, tribo-corrosion performance, biocompatibility, and osseointegration of the TiMoNb alloy. Our findings indicate that the alloy exhibits strong corrosion resistance and stable tribo-corrosion behavior, attributed to the presence of Ti-rich nanoscale precipitates that impede tribo-corrosion-induced shear deformation, along with a protective nanoscale oxide layer. Furthermore, in vitro and in vivo evaluations demonstrate the excellent biocompatibility of the TiMoNb alloy and reveal its ability to promote the regeneration of defective femurs and its favorable bone osseointegration capability. Overall, our study underscores the potential of the TiMoNb alloy as a promising material for dental implants and provides valuable insights into the tribo-corrosion mechanisms of ultrafine-grained alloys.

Friction and wear characteristics of DLC-terminated coatings deposited on AlSi10Mg alloy produced by Additive Manufacturing

Al–Si alloys are attractive materials for the fabrication of mechanical components, mainly because of their high strength-to-density ratio. Though the advent of Selective Laser Melting (SLM) has potentially expanded the range of their applicability, their poor tribological performances limit their effective use. Identifying post-processing protocols and coating strategies enhancing these properties and compatible with large-scale production is fundamental to the industrial uptake of SLM-fabricated Al–Si parts. This work tests the possibility of depositing self-lubricating Diamond-Like Carbon (DLC)-terminated films on AlSi10Mg built by SLM and subjected to different surface finishing processes. The applied coating architectures consist of an electroless nickel‐phosphorus buffer layer deposited on the AlSi10Mg surface, plus a series of interlayers and a DLC top film grown by Plasma Assisted – Chemical Vapor Deposition. The wear resistance and frictional behavior of the samples are evaluated for different substrate pre-treatments and coating assemblies under two applied loads. Cast substrates, processed and coated in a similar way, are also studied for comparison. The DLC film lends good tribological performances to all the coating-substrate combinations explored, being mechanically assisted by the underlying Ni–P layer. The friction coefficients stabilize around 0.20 at the lowest load, independently of the sample surface roughness (Sq), which spans the range 0.47–4.6 μm. Conversely, the counterpart wear rates increase with roughness up to 10−5 mm3/(N⋅m). Both tribological parameters decrease by nearly 20 % and 70 %, respectively, after a tenfold increase in load. These results indicate that DLC-terminated multilayers are extremely efficient on AlSi10Mg even in the presence of significant roughness. Their application requires a limited number of well-established processing steps also in the case of SLM grown parts.