Biofilm Resistance Research Articles

Enhanced inactivation of Aspergillus niger biofilms by the combination of UV-LEDs with chlorine-based disinfectants

The presence of pathogenic fungal biofilms in drinking water distribution systems poses significant challenges in maintaining the safety of drinking water. This research delved into the formation of Aspergillus niger (A. niger) biofilms and evaluated their susceptibility to inactivation using combinations of ultraviolet light emitting diodes (UV-LEDs) with chlorine-based disinfectants, including UV-LEDs/chlorine (Cl2), UV-LEDs/chlorine dioxide (ClO2), and UV-LEDs/chloramine (NH2Cl) at 265 nm, 280 nm and 265/280 nm. Results indicated that A. niger biofilms reached initial maturity within 24 h, with matured three-dimensional filamentous structures and conidiospores by 96 h. UV-LEDs combined with chlorine-based disinfectants enhanced A. niger biofilm inactivation compared to UV-LEDs alone and low-pressure UV combined with chlorine-based disinfectants. At an UV fluence of 400 mJ/cm2, log reductions of UV265, UV280, and UV265/280 combined with chlorine-based disinfectants were 2.95-fold, 3.20-fold, and 2.38-fold higher than that of UV265, UV280, and UV265/280, respectively. During the inactivation, A. niger biofilm cells experienced increased membrane permeability and intracellular reactive oxygen species levels, resulting in cellular apoptosis. Extracellular polymeric substances contributed to the higher resistance of biofilms. Regarding electrical energy consumption, the order was: UV-LEDs/ClO2 > UV-LEDs/NH2Cl > UV-LEDs/Cl2. These findings provide insights into the effective utilization of UV-LEDs for fungal biofilm disinfection.

Inducible clindamycin-resistant and biofilm formation in the Staphylococcus aureus isolated from healthcare worker’s anterior nasal carriage

ObjectiveThe purpose of this study is a new update on the resistance profile, Macrolide–Lincosamide–Streptogramin B resistance mechanisms and biofilm formation in the Staphylococcus aureus isolated from health care workers (HCWs) nasal carriage at a children’s teaching hospital in Babol (Northern Iran).ResultsA total of 143 non-repetitive nasal swab samples were collected from volunteers, where 53.8% (n; 77/143) were HCWs, 33.6% (n; 48/143) medical students, and 12.6% (n; 18/143) resident students. The prevalence of nasal carriers of S. aureus was 22.4% (n; 32/143), among them, 40.6% (n; 13/32) were identified as methicillin-resistant Staphylococcus aureus (MRSA( carriers. Antimicrobial susceptibility testing showed that erythromycin (68.8%, n; 22/32) and ciprofloxacin (15.6%, n; 5/32) had the highest and lowest resistance rate, respectively. The frequency of resistance genes in the strains was as follows; ermC (n; 17/32, 53.1%), ermA (n; 11/32, 34.4%), ermB (n; 6/32, 18.7%), ereA (n; 3/32, 9.4%). Moreover, 50.0% (n; 16/32), 28.1% (n; 9/32) and 21.8% (n; 7/32) of isolates were strongly, weakly and moderately biofilm producer, respectively. Macrolides-lincosamides-streptogramins B (MLSB) antibiotic resistance among S. aureus isolates from HCWs nasal carriage have found significant prevalence rates throughout the globe. It is crucial to remember that the development of biofilms and MLS B antibiotic resistance are both dynamic processes.

Plastic Debris in the Aquatic Environment: An Emerging Substratum for Antimicrobial Resistant (AMR) Biofilms.

Plastic pollution has quadrupled over the past years and has become a global concern due to its direct impact on life forms. The present study analysed whether the plastic debris in aquatic environments could act as the substratum for the antimicrobial-resistant (AMR) bacteria to form biofilm for survival. We have collected various plastic debris (n = 32) from six sites of the Periyar River, the drinking water source for the entire city and one of the most polluted rivers in Kerala (India). The chemical composition of plastics was screened via FTIR analysis and found that they comprised two types, viz., polyethylene and polypropylene. Bacteria isolated from the samples were screened for the AMR characteristics towards eight different classes of antibiotics. All isolates showed 100% resistance towards colistin and obtained the MAR index value of 0.1-0.4 range. Six representative bacterial isolates with high multiple antibiotic resistance (MAR) index were selected and identified by 16sRNA sequencing as Lysinibacillus mangiferihumi, Bacillus pumilus, Bacillus safensis, Bacillus cereus, Bacillus altitudins and Bacillus pumilus. In vitro biofilm formation was experimented on the purchased plastic samples in artificial media and river water using two selected strains, Bacillus pumilus and Bacillus cereus. Significant variations were observed in biofilm growth in different media (P < 0.05) regardless of plastic types (P > 0.05). The extracellular polymeric substances (EPS) and the characteristic holes on the surface morphology were visualized in SEM analysis, thus indicating the conditioning of the plastics by the isolates for biofilm formation.

Diterpenoids of Caryopteris trichosphaera W. W. Sm. inhibiting MRSA and VRE in vitro and in vivo

Ethnopharmacological relevanceCaryopteris trichosphaera W. W. Sm., a traditional ethnic medicine, was recorded in the Compendium of Materia Medica for treating wound infection by pathogenic infection. However, its antibacterial potential and bioactive compositions against drug-resistant bacteria need to be validated. Aim of the studyTo investigate the chemical constituents of C. trichosphaera and explore its anti-MRSA component in vitro and in vivo, together with the antibacterial mechanism. Materials and methodsBioactive constituents investigation was carried out by phytochemical method and antibacterial screening. The antibacterial mechanism was predicted by network pharmacology, which was further validated by time-kill analysis, membrane function tests, multigenerational resistance induction assay and biofilm test, and metabolomics analysis in vitro. In addition, MRSA-induced epidermal infection in mice was selected to evaluate its pharmacological effect in vivo. ResultsSix antibacterial diterpenoids against MRSA and VRE with MIC values 4–32 μg/mL from C. trichosphaera were reported for the first time, in which the major compound cativic acid (1) disrupted MRSA cell membranes by modulating permeability, depolarization, and fluidity while increasing reactive oxygen species (ROS) and malondialdehyde (MDA) levels. It also displayed remarkable anti-biofilm activity without inducing bacterial resistance or cytotoxicity. Moreover, cativic acid affected MRSA biosynthesis of cofactors, amino acid biosynthesis, nucleotide metabolism by metabolomics analysis. Furthermore, cativic acid accelerated wound healing in MRSA-infected mouse skin wounds, even better than vancomycin. ConclusionsThe results supported the traditional use of C. trichosphaera, and presented unreported anti-MRSA agent, cativic acid, as a plant-derived bactericide in vitro and in vivo for the first time.

Ciprofloxacin's Role in Disrupting Biofilms and Antibiotic Resistance in Uropathogenic Escherichia coli from Anbar Provinces

Ciprofloxacin's Role in Disrupting Biofilms and Antibiotic Resistance in Uropathogenic Escherichia coli from Anbar Provinces

Activity of Fluoroquinolones and Proton Pump Inhibitors against Resistant Oral Bacterial Biofilms, in silico and in vitro Analysis.

Oral bacterial infections are a great health concern worldwide especially in diabetic patients. Emergence of antimicrobial resistance with reference to biofilms in oral cavity is of great concern. We investigated antibiotics combination with proton pump inhibitors against oral clinical isolates. The strains were identified as Staphylococcus epidermidis and Staphylococcus aureus by the 16S rRNA gene sequencing. In molecular docking, ciprofloxacin, levofloxacin, and omeprazole best fit to active pockets of transcriptional regulators 4BXI and 3QP1. None of the proton pump inhibitors were active against S. epidermidis, whereas omeprazole showed significant inhibition (MIC 3.9 μg/ml). Fluoroquinolones were active against both S. epidermidis and S. aureus. In combination analysis, a marked decrease in minimum inhibitory concentration was noticed with omeprazole (MIC 0.12 μg/ml). In antiquorum sensing experiments, a significant inhibitory zone was shown for all fluoroquinolones (14-20 mm), whereas among proton pump inhibitors, only omeprazole (12 ± 0.12 mm) was active against Chromobacterium violaceum. In combination analysis, a moderate increase in antiquorum sensing activity was recorded for ciprofloxacin, ofloxacin, and proton pump inhibitors. Further, significant S. aureus biofilm eradication was recorded using of ciprofloxacin, levofloxacin, and omeprazole combination (78 ± 2.1%). The time-kill kinetic studies indicated a bactericidal effect by ciprofloxacin: levofloxacin: omeprazole combination over 24 hrs. It was concluded that fluoroquinolone combined with omeprazole could be an effective treatment option for eradicating oral bacterial biofilms.

Unravelling the complex mechanisms of multidrug resistance in bovine mastitis pathogens: Insights into antimicrobial resistance genes, biofilm dynamics, and efflux systems

Mastitis remains a paramount economic threat to dairy livestock, with antibiotic resistance severely compromising treatment efficacy. This study provides an in-depth investigation into the multidrug resistance (MDR) mechanisms in bacterial isolates from bovine mastitis, emphasizing the roles of antimicrobial resistance genes (ARGs), biofilm formation, and active efflux systems. A total of 162 Staphylococci, eight Escherichia coli, and seven Klebsiella spp. isolates were obtained from 215 milk samples of clinical and subclinical mastitis cases. Antibiotic susceptibility testing identified Twenty Staphylococci (12.35 %), six E. coli (75 %) and seven Klebsiella (100 %) identified as MDR displaying significant resistance to β-lactams and tetracyclines The Multiple Antibiotic Resistance (MAR) index of these isolates ranged from 0.375 to 1.0, highlighting extensive resistance. Notably, 29 of the 33 MDR isolates produced biofilms on Congo red agar, while all exhibited biofilm formation in the Microtitre Plate assay. Critical ARGs (blaZ, blaTEM, blaCTX-M, tetM, tetA, tetB, tetC, strA/B, aadA) and efflux pump genes (acrB, acrE, acrF, emrB, norB) regulating active efflux were identified. This pioneering study elucidates the synergistic contribution of ARGs, biofilm production, and efflux pump activity to MDR in bovine mastitis pathogens. To our knowledge, this comprehensive study is the first of its kind, offering novel insights into the complex resistance mechanisms. The findings underscore the imperative need for advanced antibiotic stewardship and strategic interventions in dairy farming to curb the rise of antibiotic-resistant infections, thereby protecting both animal and public health.

FTIR and GC-MS analyses of raw materials produced from food wastes used in synthesis of biofilms

The present study carried out the GC-MS and FTIR analyses of raw materials (ripe plantain peel powder, cassava starch, glycerol, acetic acid (vinegar) and eggshell powder) produced from food wastes that are used in production of biofilm. The GC-MS results revealed the presence of pentadecane, bis (2-methylpropyl) ester and benzoic acid, 3-(2-Hydroxy-6-methylphenyl)-4(3H)-quinazolinone). The FTIR analysis revealed 17 peaks for glycerol, 16 peaks for vinegar, 15 peaks for cassava starch, 16 peaks for eggshell; representing the functional groups of ether, ethene, amine, carboxylic acid, nitriles, methylene cyclic ester, primary, secondary and tertiary alcohols common to hydrocarbons. The presence of carboxylic acid was important for enhancing the mechanical and chemical properties of biofilms thereby making them viable alternatives to petroleum-based plastics. Amines contributed to the flexibility, strength, and thermal degradation resistance of biofilms, thus aiding in their biodegradability. In conclusion, the study showed that the raw materials possessed biological activities and their functional groups indicated that the raw materials are safe to humans and the environment.

Evaluation of Antimicrobial Resistance Patterns of Pseudomonas aeruginosa Strains Isolated among COVID-19 Patients in Brazil Typed by Fourier-Transform Infrared Spectroscopy.

This study aimed to characterize Pseudomonas aeruginosa strains isolated from hospitalized patients during the COVID-19 pandemic. This was achieved using phenotypic and molecular techniques, including their antimicrobial resistance profile and biofilm formation. Eighteen strains were isolated from a hospital in Rio de Janeiro, Brazil, and identified by VITEK®2, MALDI-TOF/MS (VITEK MS® and MALDI Biotyper®), and 16S rRNA sequencing. Fourier-transform infrared (FTIR) spectroscopy, antimicrobial susceptibility testing, and biofilm formation and disinfectant tolerance tests were applied to evaluate the virulence characteristics of the strains. VITEK®2 (≥99%), VITEK MS® (≥82.7%), and MALDI Biotyper® (score ≥ 2.01) accurately identified the P. aeruginosa strains, but 16S rRNA sequencing did not differentiate the species P. aeruginosa from P. paraeruginosa. FTIR typing identified three different clusters, but no correlation between the phenotypical or antimicrobial susceptibility testing patterns was found. Most strains exhibited resistance to various antimicrobials. The exceptions were sensitivity to amikacin and norfloxacin, and consequently, these could be considered potential treatment options. Most strains (n = 15, 83.3%) produced biofilms on polystyrene. Sodium hypochlorite treatment (0.5%/15 min) was shown to be the most effective disinfectant for biofilm elimination. P. aeruginosa biofilm formation and tolerance to disinfectants demonstrate the need for effective cleaning protocols to eliminate contamination by this organism in the hospital environment and medical equipment.

Enhanced microbial electrosynthesis performance with 3-D algal electrodes under high CO2 sparging: Superior biofilm stability and biocathode-plankton interactions

Microbial electrosynthesis (MES) shows great promise for converting CO2 into high-value chemicals. However, cathode biofilm erosion by high CO2 sparging and the unclear role of plankton in MES hinders the continuous improvement of its performance. This study aims to enhance biofilm resistance and improve interactions between bio-cathode and plankton by upgrading waste algal biomass into 3-D porous algal electrode (PAE) with rough surface. Results showed that the acetate synthesis of PAE under 20 mL/min CO2 sparging (PAE-20) was up to 3330.61 mol/m3, 4.63 times that of carbon felt under the same conditions (CF-20). The microbial loading of PAE-20 biofilm was twice that of CF-20. Furthermore, higher cumulative abundance of functional microorganisms was observed in plankton of PAE-20 (55 %), compared to plankton of CF-20 (14 %), and enhanced biocathode-plankton interactions significantly suppressed acetate consumption. Thus, this efficient and sustainable 3-D electrode advances MES technology and offers new perspectives for waste biomass recycling.

Characterization of Clonal Groups of Antibiotic-Resistant Biofilm-Forming Staphylococcus aureus Strains Isolated from Patients with Urinary Tract Infections in Isfahan, Iran

Background: Over the past decades, the role of biofilm-forming Staphylococcus aureus strains in urinary tract infections (UTIs) has garnered significant attention. Objectives: This study aimed to determine the epidemiological characteristics and diversity of S. aureus strains isolated from patients with UTIs in Isfahan, Iran, in 2017, with regard to their antimicrobial resistance, biofilm formation, and phylogenetic profiles. Additionally, the study investigated potential relationships among these factors statistically to develop efficient control and treatment approaches. Methods: All patients with symptomatic UTIs who had positive urine cultures for S. aureus during the study period at the laboratory of a referral hospital in Isfahan were included. All isolates were identified using specific primers for the nucA gene. Their biofilm formation capacity was evaluated using a combination of the microtiter plate and Congo-red agar methods. Antibiotic susceptibility testing was performed using the disk diffusion method. The presence of genes involved in biofilm formation and resistance to cefoxitin, aminoglycosides, and fluoroquinolones was detected using polymerase chain reaction (PCR). Staphylococcal cassette chromosome mec (SCCmec) typing, agr typing, and phene plate (PhP) typing were employed to investigate the diversity of collected strains. Results: Results showed that 19%, 57%, and 24% of confirmed S. aureus strains were strong, intermediate, and non-biofilm formers, respectively. The highest rate of resistance was against nalidixic acid (77%), followed by streptomycin (73%). The icaD and icaA genes had the highest frequency among biofilm-producing strains. gyrA (44%) and grlA (35%) were the most frequent genes among fluoroquinolone-resistant strains, while aph(3′)-IIIa was the most prevalent aminoglycoside-modifying enzyme gene. The majority of bacterial strains harbored SCCmec type III and agr type I. PhP typing of strains revealed the presence of 8 common types (CTs) and 14 single types (STs), with CT2 being the dominant type. Conclusions: The present investigation revealed various biofilm production capacities, antimicrobial resistance profiles, and clonal lineages in S. aureus isolated from patients with UTIs. These findings provide further insights into the epidemiology and pathogenicity of S. aureus strains in Iran, thereby improving the quality of surveillance and therapeutic protocols.

Genetic determinants of increased sodium hypochlorite and ciprofloxacin susceptibility in Pseudomonas aeruginosa PA14 biofilms

Reactive chlorine species (RCS) like sodium hypochlorite (NaOCl) are potent oxidizing agents and widely used biocides in surface disinfection, water treatment, and biofilm elimination. Moreover, RCS are also produced by the human immune system to kill invading pathogens. However, bacteria have developed mechanisms to survive the damage caused by RCS. Using the comprehensive Pseudomonas aeruginosa PA14 transposon mutant library in a genetic screen, we identified a total of 28 P. aeruginosa PA14 mutants whose biofilms showed increased susceptibility to NaOCl in comparison to PA14 WT biofilms. Of these, ten PA14 mutants with a disrupted apaH, PA0793, acsA, PA1506, PA1547, PA3728, yajC, queA, PA3869, or PA14_32840 gene presented a 4-fold increase in NaOCl susceptibility compared to wild-type biofilms. While none of these mutants showed a defect in biofilm formation or attenuated susceptibility of biofilms toward the oxidant hydrogen peroxide (H2O2), all but PA14_32840 also exhibited a 2–4-fold increase in susceptibility toward the antibiotic ciprofloxacin. Further analyses revealed attenuated levels of intracellular ROS and catalase activity only for the apaH and PA1547 mutant, providing insights into the oxidative stress response in P. aeruginosa biofilms. The findings of this paper highlight the complexity of biofilm resistance and the intricate interplay between different mechanisms to survive oxidative stress. Understanding resistance strategies adopted by biofilms is crucial for developing more effective ways to fight resistant bacteria, ultimately contributing to better management of bacterial growth and resistance in clinical and environmental settings.

Inhibitory effect of Nigella sativa oil loaded to liposomal nanocarriers on Candida parapsilosis isolates.

Candida parapsilosis is the second most common species causing infectious diseases and can lead to biofilm resistance. This study aims to adjust and synthesize a liposomal compound of Nigella sativa and evaluate its antifungal properties against C. parapsilosis isolates. The liposomal formulation of N. sativa was optimized through the utilization of transmission electron microscopy (TEM), particle size analysis, zeta potential measurement, and UV-visible spectrophotometry. Furthermore, an MTT (3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide) assay was conducted on peripheral blood mononuclear cells (PBMCs). The antifungal efficacy was evaluated in accordance with the M27-A3 guideline. The minimum inhibitory concentrations (MICs) of N. sativa oil and the liposomal formulation on C. parapsilosis isolates ranged from 128 to 8 µg/mL and from 250 to 31.25 µg/mL, respectively. The MIC50 and MIC90 values of N. sativa oil and the liposomal formulation were 125, 187, and 32, 96 µg/mL, respectively. The viability percentage of cells treated with the liposomal formulation and free N. sativa oil was 91% and 85%, respectively. The cytotoxicity of free N. sativa was significantly reduced when using nanoliposomes. The liposomal form of N. sativa showed greater antifungal properties compared to the free N. sativa extract against C. parapsilosis isolates.

Anti-Biofilm Effect of Hybrid Nanocomposite Functionalized with Erythrosine B on Staphylococcus aureus Due to Photodynamic Inactivation.

Resistant biofilms formed by Staphylococcus aureus on medical devices pose a constant medical threat. A promising alternative to tackle this problem is photodynamic inactivation (PDI). This study focuses on a polyurethane (PU) material with an antimicrobial surface consisting of a composite based on silicate, polycation, and erythrosine B (EryB). The composite was characterized using X-ray diffraction and spectroscopy methods. Anti-biofilm effectiveness was determined after PDI by calculation of CFU mL-1. The liquid PU precursors penetrated a thin silicate film resulting in effective binding of the PU/silicate composite and the PU bulk phases. The incorporation of EryB into the composite matrix did not significantly alter the spectral properties or photoactivity of the dye. A green LED lamp and laser were used for PDI, while irradiation was performed for different periods. Preliminary experiments with EryB solutions on planktonic cells and biofilms optimized the conditions for PDI on the nanocomposite materials. Significant eradication of S. aureus biofilm on the composite surface was achieved by irradiation with an LED lamp and laser for 1.5 h and 10 min, respectively, resulting in a 10,000-fold reduction in biofilm growth. These results demonstrate potential for the development of antimicrobial polymer surfaces for modification of medical materials and devices.

Effect of antibiotics and antibiotic by-products on the chlorine resistance of biofilms in drinking water distribution systems

This study investigated the effects of tetracycline (TC) and sulfadiazine (SD), along with their degradation products, on biofilm chlorine resistance. The results showed that low concentrations of antibiotics and their degradation products promoted biofilm formation on tube surfaces and increased resistance to chlorine. There was a positive correlation between antibiotic levels, degradation products, and biofilm chlorine resistance within a specific concentration range. SD had a more significant impact on biofilm chlorine resistance compared to TC. The presence of both antibiotics and their degradation products in water led to an increase in biofilm chlorine resistance, especially when combined with 0.3 mg/L sodium hypochlorite. The study shows a positive association between antibiotic and degradation product concentrations and the biofilms' improved chlorine resistance, a phenomenon that could have major consequences for water treatment efforts. Additionally, higher concentrations of antibiotics and their degradation products were associated with reduced biodiversity within the biofilm. Overall, the findings suggest that the presence of antibiotics and their degradation products can influence biofilm formation, alter bacterial species composition, and enhance biofilm resistance to chlorine in drinking water distribution systems. This fresh perspective on the relationship between pharmaceutical residues and microbial communities in water systems could transform our approach to assuring water safety and combatting antimicrobial resistance.

Efficacy of gaseous ozone and UVC radiation against Candida auris biofilms on polystyrene surfaces

The growth and attachment of highly resistant biofilms on/to polymer-based surfaces, including reusable medical devices is a significant health concern in infection control. The increasing prevalence of the multidrug-resistant yeast, Candida auris, has recently garnered immense interest as a contributor to healthcare-associated infections. In this study, we investigate the potential of disinfection processes (ozone, UVC, and ozone + UVC) to inactivate C. auris biofilms (NCPF 8971), grown on polystyrene surfaces. A bespoke decontamination chamber is used to expose the substrate for 20–60 mins, corresponding to ozone doses between 1000 and 3000 ppm.min and UVC doses between 2864 and 11,592 mJ/cm2, respectively. The performance of these 3 treatment methods against the biofilms and vegetative/planktonic cells of the organism is comparatively evaluated. While complete inactivation (> 8 log10 reduction, CFU/mL) of the vegetative cells is observed within 40 mins by all methods, the biofilms proved considerably difficult to inactivate. Only 3.3 log10 reduction was achieved using ozone for 40 min, whereas 7.2 log10 reduction was obtained using UVC for 40 min. A hybrid application of ozone and UVC improved the decontamination efficacy compared to their independent applications (i.e., ozone only and UVC only). Scanning electron microscopy results yielded new insights into the inactivation mechanisms; thus providing the needed foundation for newer developments in oxidation-based processes for biofilm mitigation and control.

Prevalence of plasmid-mediated quinolone resistance genes and biofilm formation in different species of quinolone-resistant clinical Shigella isolates: a cross-sectional study

BackgroundThe purpose of this study was to look into the presence of plasmid-mediated quinolone resistance (PMQR) genes and biofilm formation in several species of clinical Shigella isolates that were resistant to quinolones.MethodsThe stool samples of 150 patients (younger than 10 years) with diarrhea were collected in this cross-sectional study (November 2020 to December 2021). After cultivation of samples on Hektoen Enteric agar and xylose lysine deoxycholate agar, standard microbiology tests, VITEK 2 system, and polymerase chain reaction (PCR) were utilized to identify Shigella isolates. The broth microdilution method was used to determine antibiotic susceptibility. PMQR genes including qnrA, qnrB, qnrC, qnrD, qnrE, qnrS, qnrVC, qepA, oqxAB, aac(6′)-Ib-cr, and crpP and biofilm formation were investigated in quinolone-resistant isolates by PCR and microtiter plate method, respectively. An enterobacterial repetitive intergenic consensus polymerase chain reaction (ERIC-PCR) technique was used to determine the clonal relatedness of quinolone-resistant isolates.ResultsA total of 95 Shigella isolates including S. sonnei (53, 55.8%), S. flexneri (39, 41.1%), and S. boydii (3, 3.2%) were identified. The highest resistance rates of the isolates were against ampicillin (92.6%, n = 88/95). Overall, 42 of 95 (44.2%) isolates were simultaneously resistant against two or more quinolones including 26 (61.9%) S. sonnei and 16 (38.1%) S. flexneri. All isolates were multidrug-resistant (resistance to more than 3 antibiotics). The occurrence of PMQR genes was as follows: qnrS (52.4%), qnrA and aac(6′)-Ib-cr (33.3%), and qnrB (19.0%). The prevalence in species was as follows: 61.5% and 37.5% (qnrS), 19.2% and 56.3% (qnrA), 38.5% and 25.0 (aac(6′)-Ib-cr), and 19.2% and 18.8% (qnrB) for S. sonnei and S. flexneri, respectively. The other PMQR genes were not detected. In total, 52.8% (28/53) of quinolone-susceptible and 64.3% (27/42) of quinolone-resistant isolates were biofilm producers. Biofilm formation was not significantly different between quinolone-resistant and quinolone-susceptible isolates (P-value = 0.299). Quinolone-resistant isolates showed a high genetic diversity according to the ERIC-PCR.ConclusionIt seems that qnrS, qnrA, and aac(6′)-Ib-cr play a significant role in the quinolone resistance among Shigella isolates in our region. Also the quinolone-resistant S. flexneri and S. sonnei isolates had a high genetic diversity. Hence, antibiotic therapy needs to be routinely revised based on the surveillance findings.

Enhancing biofilm resistance and preserving optical translucency of 3D printed clear aligners through carboxybetaine-copolymer surface treatment

ObjectivesThis study aimed to use a carboxybetaine methacrylate (CBMA) copolymer solution to surface treat 3D printed clear aligners at different fabrication stages, to impart antifouling properties, and assess the surface treatment at various fabrication stages' impact on physico-mechanical characteristics. MethodsSurface treatments using a blend of 2-hydroxyethyl methacrylate (HEMA) and CBMA, termed CCS, were performed at various stages of 3D printed clear aligner fabrication. Experimental groups, CB1, CB2, and CB3, were determined by the stage of surface treatment during post-processing. CB1, CB2, and CB3 received treatment before post-curing, after post-curing, and after post-processing, respectively. Untreated samples served as controls. Physical and mechanical properties were assessed through tensile testing, Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and UV-Vis spectroscopy. The surface was further characterized through scanning electron microscopy and contact angle measurements. The cytotoxicity was assessed with 7-day elution and agar diffusion assays. Lastly, bacterial biofilm resistance was evaluated using confocal laser scanning microscopy. Crystal violet assay was performed using Streptococcus mutans. ResultsSurface treatment during CB1 stage exerted the most significantly unfavorable influence on properties of the 3D printed aligner resin. CB2 samples showed the maximum preservation of translucency even after 7-day aging. CB2 and CB3 phases showed enhanced hydrophilicity of sample surfaces with reduced adhesion of multispecies biofilm and S. mutans. SignificanceApplication of CCS surface treatment immediately after post-curing (CB2) can enhance the biofilm resistance of 3D printed clear aligners while maintaining high fidelity to optical translucency and constituent mechanical properties.

Molecular characterization, antibiotic resistant pattern and biofilm forming potentiality of bacterial community associated with Ompok pabda fish farming in southwestern Bangladesh

Ompok pabda is gaining popularity in the aquaculture industry due to its increasing demand; however research on microbial diversity and antibiotic susceptibility remains limited. The present study was designed to identify the bacterial pathogens commonly found in the pabda farming system with their biofilm forming potential and antibiotic susceptibility. Different bacterial strains were isolated from water, sediments and gut, gill of pabda fish and the isolates were identified based on their morphological traits, biochemical and molecular analysis. Antibiotic susceptibilities, antibiotic resistance gene determination and biofilm formation capabilities were evaluated by disc diffusion method, PCR amplification and Microtiter plate (MTP) assay, respectively. The respective isolates of gill and gut of pabda aquaculture and their environments were: Exiguobacterium spp. (25 %), Enterococcus spp. (20 %), Bacillus spp. (10 %), Acinetobacter spp. (10 %), Enterobacter spp. (10 %), Aeromonas spp. (10 %), Lactococcus spp. (5 %), Klebsiella spp. (5 %) and Kurthia spp. (5 %). Antibiotic resistance frequencies were found to be relatively high, especially for trimethoprim (95 %), sulfafurazole (75 %), ampicillin (60 %), amoxicillin-clavulanic acid (55 %), and cephradine (50 %). 30 % isolates were categorized as DR bacteria followed by 30 % isolates were MDR bacteria and 40 % were classified as XDR bacteria. Moreover, 4 antibiotic resistant genes were detected with sul1 (30 %), dfrA1 (10 %), tetC (40 %), and qnrA (5 %) of isolates. Based on the microtiter plate method, 20 %, 25 %, and 30 % of isolates were found to produce strong, moderate, and weak biofilms, respectively. The findings suggest that biofilm forming bacterial strains found in O. pabda fish farm may be a potential source of numerous antibiotic-resistant bacteria. The study sheds new light on antibiotic resistance genes, which are typically inherited by bacteria and play an important role in developing effective treatments or control strategies.

Carboxymethyl chitosan stabilized AuNPs/ACP nanohybrids in enamel white spot lesions.

Acidic bacterial biofilms-associated enamel white spot lesions (WSLs) are one of the hallmarks of early caries, causing demineralization and decomposition of dental hard tissues. Therefore, to effectively prevent and treat WSLs, it is important to inhibit the activity of cariogenic bacteria while promoting the remineralization of demineralized enamel. Amorphous calcium phosphate (ACP) favors hard tissue remineralization due to its biological activity and ability to release large amounts of Ca2+ and PO4 3-. However, ACP-based biomineralization technology is not effective due to its lack of antimicrobial properties. Here, carboxymethyl chitosan (CMCS) was employed as a reducing agent and stabilizer, and dual-functional nanohybrids CMCS/AuNPs/ACP with biofilm resistance and mineralization properties were successfully synthesized. The addition of AuNPs enhances the antimicrobial activity and participates in regulating the formation of hydroxyapatite (HAp). The nanohybrids exhibited significant destructive effects against cariogenic bacteria and their biofilms and showed bactericidal activity under bacteria-induced acidic conditions. More importantly, this nanohybrids showed superior results in promoting the remineralization of demineralized enamel, compared to fluoride and CMCS/ACP in vitro. The CMCS/AuNPs/ACP nanohybrids not only reverse the cariogenic microenvironment at the microbial level, but also promote self-repairing of enamel WSLs regarding the microstructure. The present work offers a theoretical and experimental basis for using the CMCS/AuNPs/ACP nanohybrids as a potential dual-functional agent for the clinical treatment of enamel WSLs.