Residues In Animal-derived Food Research Articles

Highly electroactive Co–ZnO/GO nanocomposite: Electrochemical sensing platform for oxytetracycline determination

Antimicrobial residues in animal-derived foods have become a major source of concern around the world. Oxytetracycline (OTC), one of these antibiotics that belongs to the tetracycline family should be detected in these matrices. Nanostructured metal oxides have attracted a lot of scientific attention due to their special characteristics that can be exploited for creating innovative nanodevices. Therefore, in the present study, we report the fabrication of cobalt-doped ZnO/GO nanocomposites for OTC sensors using a simple and environmentally friendly method that does not require toxic solvents. Contact angle measurements, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and UV–Vis were used to confirm the successful fabrication of the Co–ZnO/GO nanocomposite and to determine the surface area, Structural, morphological features, chemical composition and purity of the nanocomposite. The electrochemical and electrocatalytic properties were recorded using cyclic voltammetry (CV), electrochemical impedance spectroscopy, and differential pulse voltammetry (DPV). Optimizing parameters such as scan rate, pH value, deposition time, and deposition potential, we achieve a wide linear concentration range from 10−12 M to 10−7 M, with an impressive detection limit of 1.6 10−13 M.Notably, our sensor exhibits remarkable selectivity, demonstrating its usefulness for the detection of oxytetracycline traces in real milk samples. These results emphasize the novelty and practical significance of our work and provide a promising avenue for the development of sensitive and selective electrochemical sensing platforms in various fields.

Fragmentation characteristics-based nontargeted screening method of exogenous chemical residues in animal-derived foods using reversed-phase and hydrophilic interaction liquid chromatography–high-resolution mass spectrometry

Fragmentation characteristics are crucial for nontargeted screening to discover and identify unknown exogenous chemical residues in animal-derived foods. In this study, first, fragmentation characteristics of 51 classes of exogenous chemical residues were summarized based on experimental mass spectra of standards in reversed-phase and hydrophilic interaction liquid chromatography–high-resolution mass spectrometry (MS) and mass spectra from the MassBank of North America (MoNA) library. According to the proportion of fragmentation characteristics to the total number of chemical residues in each class, four screening levels were defined to classify 51 classes of chemical residues. Then, a nontargeted screening method was developed based on the fragmentation characteristics. The evaluation results of 82 standards indicated that more than 90 % of the chemical residues with MS/MS spectra can be identified at concentrations of 100 and 500 μg/kg, and about 80 % can be identified at 10 μg/kg. Finally, the nontargeted screening method was applied to 16 meat samples and 21 egg samples as examples. As a result, eight chemical residues and transformation products (TPs) of 5 classes in the exemplary samples were found and identified, in which 3 TPs of azithromycin were identified by fragmentation characteristics-assisted structure interpretation. The results demonstrated the practicability of the nontargeted screening method for routine risk screening of food safety.

Quantum dot-based fluorescence-linked immunosorbent assay for the rapid detection of lomefloxacin in animal-derived foods

Lomefloxacin (LMF), a third-generation fluoroquinolone antibacterial agent, is often used to treat bacterial and mycoplasma infections. However, due to its prolonged half-life and slow metabolism, it is prone to residues in animal-derived foods, posing a potential food safety risk. Therefore, it is particularly urgent and important to establish a method for detecting lomefloxacin. In this study, direct and indirect competitive fluorescence-linked immunosorbent assay (dc-FLISA and ic-FLISA) based on quantum dots (QDs) was established for the detection of LMF. As for dc-FLISA, the half-maximal inhibitory concentration (IC50) and limit of detection (LOD) were 0.84 ng/mL, 0.04 ng/mL, respectively, the detection ranges from 0.08 to 9.11 ng/mL. The IC50 and LOD of ic-FLISA were 0.43 ng/mL and 0.03 ng/mL, respectively, meanwhile the detection ranges from 0.05 to 3.49 ng/mL. The recoveries of dc-FLISA and ic-FLISA in animal-derived foods (milk, fish, chicken, and honey), ranged from 95.8% to 105.2% and from 96.3% to 103.4%, respectively, with the coefficients of variation less than 8%. These results suggest that the dc-FLISA and ic-FLISA methods, which are based on QD labelling, are highly sensitive and cost-effective, and can be effectively used to detect LMF in animal-derived foods.

Isothermal Reciprocal Catalytic DNA Circuit for Sensitive Analysis of Kanamycin.

Inappropriate use of veterinary drugs can result in the presence of antibiotic residues in animal-derived foods, which is a threat to human health. A simple yet efficient antibiotic-sensing method is highly desirable. Programmable DNA amplification circuits have supplemented robust toolkits for food contaminants monitoring. However, they currently face limitations in terms of their intricate design and low signal gain. Herein, we have engineered a robust reciprocal catalytic DNA (RCD) circuit for highly efficient bioanalysis. The trigger initiates the cascade hybridization reaction (CHR) to yield plenty of repeated initiators for activating the rolling circle amplification (RCA) circuit. Then the RCA-generated numerous reconstituted triggers can reversely stimulate the CHR circuit. This results in a self-sufficient supply of numerous initiators and triggers for the successive cross-invasion of CHR and RCA amplifiers, thus leading to exponential signal amplification for the highly efficient detection of analytes. With its flexible programmability and modular features, the RCD amplifier can serve as a universal toolbox for the high-performance and accurate sensing of kanamycin in buffer and food samples including milk, honey, and fish, highlighting its enormous promise for low-abundance contaminant analysis in foodstuffs.

Determination of 60 Food-Borne Stimulant Drug Residues in Animal-Derived Foods by Solid-Phase Extraction Purification and Ultra-High-Performance Liquid Chromatography-Quadrupole/Orbitrap High-Resolution Mass Spectrometry

A method for the rapid screening and confirmation of 60 food-borne stimulants in animal-derived foods was developed using the ultra-high-performance liquid chromatography-quadrupole/orbitrap high-resolution mass spectrometry (UPLC-Q/Orbitrap HRMS). After enzymatic hydrolysis at 37°C for 16 h, the samples were extracted with acetonitrile solution. The extraction solution was purified by PRiME HLB pass-through solid-phase extraction cartridge and redissolved by nitrogen blowing. The target compounds of reconstitution fluid were separated by Hypersil GOLD™ VANQUISH column (2.1 mm × 100 mm, 1.9 μm). The raw data were collected for the target compounds in Full Scan-ddMS2 mode, and then the Quan Browser module under Xcalibur software can be used to analyze the quantitative results of the samples. The combination of Tracefinder and mzVault software can realize the qualitative screening and confirmation of the samples. The results showed that the relative deviation of the exact mass of the 60 food-borne stimulants was less than 5.0 × 10−6, which had a good linear relationship in the corresponding concentration, and the correlation coefficient (R2) was greater than 0.9966. The detection limit ranged from 0.05 to 0.5 μg/kg. The quantification limit ranged from 0.1 to 1 μg/kg. The method recoveries ranged from 70.2% to 111.9% with relative standard deviations of 0.05% to 9.00% (n = 6). The method is easy to operate, covers a wide range of targets, and has high efficiency and accuracy. It is suitable for rapid screening and confirmation of various food-derived stimulants in animal-derived foods and provides assistance for food safety in the major events.

Antibody Production, Immunoassay Establishment, and Specificity Study for Flunixin and 5-Hydroxyflunixin.

Flunixin (FLU) is a nonsteroidal drug that is widely used in animals, causing severe drug residues in animal-derived foods and environment. The development of antibody-based rapid immunoassay methods is of great significance for the monitoring of FLU and its metabolite 5-hydroxyflunixin (5-FLU). We prepared monoclonal antibodies (mAbs) with different recognition spectra through FLU-keyhole limpet hemocyanin conjugates as immunogen coupled with antibody screening strategies. mAb5E6 and mAb6D7 recognized FLU with high affinity, and mAb2H5 and mAb4A4 recognized FLU and 5-FLU with broad specificity. Through evaluating the recognition of these mAbs against more than 11 structural analogues and employing computational chemistry, molecular docking, and molecular dynamics methodologies, we preliminarily determined the recognition epitope and recognition mechanism of these mAbs. Finally, an indirect competitive enzyme-linked immunosorbent assay for FLU based on mAb6D7 was developed, which exhibited limits of detection as low as 0.016-0.042 μg kg -1 (L-1) in milk and muscle samples.

Smartphone-based pH responsive 3-channel colorimetric biosensor for non-enzymatic multi-antibiotic residues.

Antibiotic residues in animal-derived food pose a risk to food safety and human health. Here, a smartphone-based pH-responsive 3-channel colorimetric biosensor is constructed for rapid detection of non-enzymatic multi-antibiotic residues in milk. In this system, a magnetic separation and enrichment approach is designed to specifically capture different antibiotic residues in complex environment. Indicators loaded on polydopamine-silver nanoparticles with excellently pH responsive visualization properties are utilized to ensure the high sensitivity of detection system. Moreover, smartphones are introduced to fulfill the demand for portable and on-site inspection of practical applications. It achieves simultaneous detection of oxytetracycline, kanamycin and streptomycin in the linear range of 1-105 pg/mL with detection limits of 0.085, 0.168, and 0.307pg/mL, respectively. The practicality of the reported multi-antibiotic residues detection system is successfully demonstrated and evaluated challenging milk samples. Therefore, this system demonstrates the wide applications in multi-antibiotic residue analysis and food safety guarantee.

Determination of niclosamide and its two metabolites in fish by molecularly imprinted microsphere-based pseudo-ELISA

Niclosamide is usually used for the treatment of parasite infections in animals. However, niclosamide and one of its metabolites 2-chloro-4-nitroaniline are mutagenic substances, and their residues in animal-derived foods are potential risks to consumers. As far as we know, there has been no immunoassay or pseudo immunoassay reported to determine niclosamide and its metabolites in animal-derived foods. In this study, a molecularly imprinted microsphere for niclosamide was first synthesized, and a streptavidin-horseradish peroxidase labelled conjugate was also synthesized. The two reagents were used to develop a pseudo enzyme-linked immunosorbent assay on conventional microplates for the determination of niclosamide and its two metabolites (2-chloro-4-nitroaniline and 5-chlorosalicylic acid) in fish. Because biotinylated horseradish peroxidase was used to amplify the signal, the method sensitivities for the three analytes were increased fivefold to 27.5-fold (limits of detection of 0.004–0.03 ng/mL) in comparison with the use of single horseradish peroxidase labelled conjugate (limits of detection of 0.11–0.16 ng/mL). Their recoveries from the standards fortified blank fish samples were in the range of 70.6–95.5%. This is the first study reporting a molecularly imprinted polymer-based pseudo immunoassay for screening of niclosamide and its metabolites in food sample.

Development of a receptor based signal amplified fluorescence polarization assay for multi-detection of 35 sulfonamides in pork.

With the increasing focus on food security, a screening method with high-throughput, ultra-sensitivity, and user-friendly operation is urgently needed for monitoring of sulfonamides residues in animal-derived foods. In this study, the sulfonamides' receptor dihydropteroate synthase of Staphylococcus aureus was subjected to saturate mutation, and a mutant with higher affinities for sulfonamides was obtained. The mutant was then used as recognition material to establish a fluorescence polarization assay for determination of 35 sulfonamides in pork. Due to the use of an enhanced fluorescent tracer containing two fluorophore molecules, the sensitivities for the 35 sulfonamides were improved for 2.8-8.6 folds (LODs 0.03-1.16ng/mL) in comparison with using conventional fluorescent tracer.The present method outperformed all previous fluorescence polarization (immuno)assays for sulfonamides due to its broader spectrum, higher sensitivity, and shorter assay time. Furthermore, this is the first study reporting an enhanced fluorescence polarization assay for determination of small molecule substance.

Simultaneous quantitative determination of residues of abamectin, ivermectin, albendazole and its three metabolites in beef and chicken by HPLC-PDA.

Antimicrobial drugs are frequently used in a combination or shuttle way to cope with coinfection of bacteria or parasites and prevent drug resistance, thus the accurate quantification of multiple drug residues in animal-derived foods is crucial to ensure food safety. Here, a simple and efficient high-performance liquid chromatography-photodiode array (HPLC-PDA) method was established for the simultaneous quantitative screening of six common residues of antiparasitic drugs, including abamectin (ABM), ivermectin (IVM), albendazole (ABZ) and the three metabolites of ABZ in beef and chicken. The LODs and LOQs for six target compounds in beef and chicken are determined to be 3.2 to 12.5µg/kg and 9.0 to 30.0µg/kg, respectively. The calibration curves show good linearity (R2≥0.9990) between the peak area and concentration. The recoveries from the fortified blank samples are all above 85.10%. Finally, the applicability of the HPLC-PDA method is successfully demonstrated by the real sample analysis.

Effects of environmental pollution on wildlife and human Health and novel mitigation strategies

Environment refers to the totality of all external factors and conditions that have an impact on a living thing's survival and growth. The effects of pollution on wildlife and human health are complex and affect many ecosystems and facets of civilization. Urbanization, industrialization, and the indiscriminate and improper use of chemicals, such as pesticides, have all accelerated environmental degradation and contamination, which has a negative impact on living things' health and created issues with residues in animal-derived foods. The impact of pollution on biotic components has been highlighted by recent developments in environmental-related toxicity in humans and animals as well as the rising frequency of chemical residue detection in food products. To solve the complex problems caused by environmental contamination, innovation and new mitigation techniques are essential. The creation and use of cutting-edge technology, such as diverse bioremediation methods, are included. In order to bring about change and promote successful mitigation methods, public participation and awareness are essential. Governments, businesses, communities, and people must work together to address the problems that environmental degradation has created. We can lessen pollution's harmful impacts on wildlife and human health, guaranteeing a healthier and more sustainable future for both the ecosystem and people, by implementing creative mitigation measures and giving sustainable practices priority.

A physiologically based pharmacokinetic model to optimize the dosage regimen and withdrawal time of cefquinome in pigs.

Cefquinome is widely used to treat respiratory tract diseases of swine. While extra-label dosages of cefquinome could improve clinical efficacy, they might lead to excessively high residues in animal-derived food. In this study, a physiologically based pharmacokinetic (PBPK) model was calibrated based on the published data and a microdialysis experiment to assess the dosage efficiency and food safety. For the microdialysis experiment, in vitro/in vivo relative recovery and concentration-time curves of cefquinome in the lung interstitium were investigated. This PBPK model is available to predict the drug concentrations in the muscle, kidney, liver, plasma, and lung interstitial fluid. Concentration-time curves of 1000 virtual animals in different tissues were simulated by applying sensitivity and Monte Carlo analyses. By integrating pharmacokinetic/pharmacodynamic target parameters, cefquinome delivered at 3-5 mg/kg twice daily is advised for the effective control of respiratory tract infections of nursery pig, which the bodyweight is around 25 kg. Based on the predicted cefquinome concentrations in edible tissues, the withdrawal interval is 2 and 3 days for label and the extra-label doses, respectively. This study provides a useful tool to optimize the dosage regimen of cefquinome against respiratory tract infections and predicts the concentration of cefquinome residues in edible tissues. This information would be helpful to improve the food safety and guide rational drug usage.

A new semiconductor heterojunction SERS substrate for ultra-sensitive detection of antibiotic residues in egg

Antibiotic residues in animal-derived food (egg) are threatening human health. Semiconductor heterojunction surface-enhanced Raman scattering (SERS) substrates can be used for ultra-sensitive detection of antibiotic residues in egg. Here, a TiO2/ZnO heterojunction was developed as a new SERS substrate based on an interface engineering strategy. Due to strong interfacial coupling and efficient carrier separating in heterostructure, utilization rate of photo-induced electrons in substrate was improved greatly, which realized the efficient charge transfer in substrate-molecule system, resulting in a prominent SERS enhancement. Taking the detection of enrofloxacin residue in egg as an example, the limit of detection (LOD) is only 13.1 μg/kg, which is far below the European Union standard, and lower than LODs of other conventional analytical methods and existing noble metal-based SERS methods. More importantly, benefiting from high sensitivity and selectivity of heterojunction and fingerprint characteristics of SERS, multiple antibiotic residues in egg can be identified simultaneously.

Few Layer Ti3C2 MXene-Based Label-Free Aptasensor for Ultrasensitive Determination of Chloramphenicol in Milk.

Quantitative detection of veterinary drug residues in animal-derived food is of great significance. In this work, a simple and label-free electrochemical aptasensor for the highly sensitive detection of chloramphenicol (CAP) in milk was successfully developed based on a new biosensing method, where the single- or few-layer Ti3C2 MXene nanosheets functionalized via the specific aptamer by self-assembly were used as electrode modifiers for a glassy carbon electrode (aptamer/Ti3C2 MXene/GCE). Differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), scanning electron microscopy (SEM), atomic force microscope (AFM), and so on were utilized for electrochemical and morphological characterization. Under the optimized conditions, the constructed aptasensor exhibited excellent performance with a wider linearity to CAP in the range from 10 fM to 1 μM and a low detection limit of 1 fM. Aptamer/Ti3C2 MXene/GCE demonstrated remarkable selectivity over other potentially interfering antibiotics, as well as exceptional reproducibility and stability. In addition, the aptasensor was successfully applied to determine CAP in milk with acceptable recovery values of 96.13% to 108.15% and relative standard deviations below 9%. Therefore, the proposed electrochemical aptasensor is an excellent alternative for determining CAP in food samples.

Construction of a self-sufficient DNA circuit for amplified detection of kanamycin.

Improper use of kanamycin can lead to trace kanamycin residues in animal-derived foods, which can pose a potential threat to public health. Isothermal enzyme-free DNA circuits have provided a versatile toolbox for detecting kanamycin residues in complicated food samples, yet they are always limited by low amplification efficiency and intricate design. Herein, we present a simple-yet-robust nonenzymatic self-driven hybridization chain reaction (SHCR) amplifier for kanamycin determination with 5800-fold sensitivity over that of the conventional HCR circuit. The analyte kanamycin-activated SHCR circuitry can generate numerous new initiators to promote the reaction and improve the amplification efficiency, thus achieving an exponential signal gain. With precise target recognition and multilayer amplification capability, our self-sustainable SHCR aptasensor facilitated the highly sensitive and reliable analysis of kanamycin in buffer, milk, and honey samples, thus holding great potential for the amplified detection of trace contaminants in liquid food matrices.

[High-throughput screening of multi-pesticide residues in animal-derived foods by QuEChERS-online gel permeation chromatography-gas chromatography-tandem mass spectrometry].

Improvements in living standards have led to an increase in the consumption of animal-derived foods. Pesticides may be used illegally during animal breeding as well as meat production and processing for pest control and preservation. Pesticides applied to crops may also be enriched in animal tissues through the food chain, thereby increasing the risk of pesticide residue accumulation in muscles and visceral tissues and endangering human health. China has stipulated maximum residue limits for pesticide residues in livestock and poultry meat and their viscera. Many other major developed countries and organizations, including the European Union, Codex Alimentarius Commission, and Japan, have also set maximum residue limits for these residues (0.005-10, 0.004-10, and 0.001-10 mg/kg, respectively). Research on pretreatment technologies for pesticide residue detection in plant-derived foods is widely available, but insufficient attention has been paid to animal-derived foods. Thus, high-throughput detection technologies for pesticide residues in animal-derived foods are limited. The impurities that can interfere with the detection process for plant-derived foods mainly include organic acids, polar pigments, and other small molecular compounds; by contrast, the matrix of animal-derived foods is much more complex. Macromolecular proteins, fats, small molecular amino acids, organic acids, and phospholipids can interfere with the detection of pesticide residues in animal-derived foods. Thus, selecting the appropriate pretreatment and purification technology is of great importance. In this study, the QuEChERS technique was combined with online gel permeation chromatography-gas chromatography-tandem mass spectrometry (GPC-GC-MS/MS) to determine 196 pesticide residues in animal-derived foods. The samples were extracted with acetonitrile, purified using the QuEChERS technique coupled with online GPC, detected by GC-MS/MS, determined in multiple reaction monitoring mode (MRM), and quantified using the external standard method. The effects of the extraction solvent and purification agent type on the extraction efficiency and matrix removal of the method were optimized. The purification effect of online GPC on the sample solution was investigated. The optimal distillate receiving time was obtained by studying the recoveries of the target substances and matrix effects over different distillate receiving periods to achieve the effective introduction of target substances and efficient matrix removal. Further, the advantages of the QuEChERS technique combined with online GPC were evaluated. The matrix effects of 196 pesticides were assessed; ten pesticide residues showed moderate matrix effects, while four pesticide residues showed strong matrix effects. A matrix-matched standard solution was used for quantification. The 196 pesticides showed good linearity in the range of 0.005-0.2 mg/L, with correlation coefficients greater than 0.996. The limits of detection and quantification were 0.002 and 0.005 mg/kg, respectively. The recoveries of 196 pesticides at spiked levels of 0.01, 0.05, and 0.20 mg/kg were 65.3%-126.2%, with relative standard deviations (RSDs) of 0.7%-5.7%. The proposed method is rapid, accurate, and sensitive; thus, it is suitable for the high-throughput screening and detection of multiple pesticide residues in animal-derived foods.

A Review of Veterinary Drug Residue Detection: Recent Advancements, Challenges, and Future Directions

Veterinary drug residues of common food (milk, meat) have posed serious threats to the environment and human health, making the quality and safety of agricultural, livestock, and aquatic products increasingly prominent. With the widespread use of veterinary drugs and the requirements for food safety, it has become urgent to detect veterinary drug residues in animal-derived foods. So far, few studies have systematically reviewed the progresses, challenges, and future directions in veterinary drug residue detection. A thorough review on the current advancements, challenges, and potential future directions of veterinary drug residue detection will be extremely beneficial and timely. This study reviewed recent developments of detection technology of veterinary drug residues. The current issues and challenges in veterinary drug residue detection were examined and highlighted. Finally, future proposals on directions and prospects for veterinary drug residue detection were suggested. High-throughput and high-sensitivity veterinary drug detection technology, sample pretreatment technology for rapid processing, and the fusion of multiple detection methods were recommended as the main directions for the future development of veterinary drug residue detection. It was suggested to develop the analysis and detection technologies of veterinary drug residue towards high automation, high sensitivity, and high throughput in the future. This review provides new ideas and strategies for the rapid development of animal husbandry industry and protecting consumers’ physical health and food safety.

Evaluation of Antibiotics Residues in Milk and Meat Using Different Analytical Methods.

Veterinary drugs are pharmacologically and biologically active chemical agents. At present, veterinary drugs are extensively used to prevent and treat animal diseases, to promote animal growth, and to improve the conversion rate of feed. However, the use of veterinary drugs in food-producing animals may leave residues of the parent compounds and/or their metabolites in food products resulting in harmful effects on humans. To ensure food safety, sensitive and effective analytical methods have been developing rapidly. This review describes sample extraction and cleanup methods, and different analytical techniques are used for the determination of veterinary drug residues in milk and meat. Sample extraction methods, such as solvent extraction, liquid-liquid extraction, and cleanup methods such as dispersive solid-phase extraction and immunoaffinity chromatography, were summarized. Different types of analytical methods such as microbial, immunological, biosensor, thin layer chromatography, high-performance liquid chromatography, and liquid chromatography-tandem mass spectrometry were discussed for the analysis of veterinary drug residues in animal-derived foods. Liquid chromatography-tandem mass spectrometry is the most widely used analytical technique for the determination of antibiotic drug residues. This is due to the powerful separation of LC and accurate identification of MS, and LC-MS/MS is more popular in the analysis of veterinary drug residues.

Strong antibacterial effects in animal-derived food detected via non-target planar bioassays

Screening for antibiotic residues in animal-derived food is largely done by in vitro assays. However, a non-negligible number of positive screening results (sum values) remains with no confirmation by high-performance liquid chromatography coupled to high-sophisticated mass spectrometers. To investigate this inconsistency, a hyphenated strategy was sought that combines on the same surface planar chromatography−multi-imaging with antibacterial planar bioassays. Strong antibacterial activity against Gram-positive and Gram-negative bacteria was revealed in four animal-derived food extracts (pig muscle, cow milk, chicken eggs, and honey), which, however, were previously proven to be veterinary drug residue-free. This antibacterial effect was strong, extremely exceeding the effect from a mixture of 81 veterinary drugs spiked at 300 µg/kg, which is about 3 times the maximum residue limit of most of these veterinary drugs. The unknown antibacterial zones were online-eluted to high-resolution mass spectrometry to obtain molecular formulas. Endogenous fatty acids and lipids were identified to be responsible for the strong antibacterial effects, confirmed by co-analyzed reference compounds. These results resolved the methodological inconsistency but also question the prevailing understanding: Current food safety only based on target analysis of regulated antibiotic residues neglects consumer protection when the much stronger antibacterial impact of food on the human microbiome is overlooked.

Affinity-Based Analysis Methods for the Detection of Aminoglycoside Antibiotic Residues in Animal-Derived Foods: A Review.

With the increasingly serious problem of aminoglycoside antibiotic residues, it is imperative to develop rapid, sensitive and efficient detection methods. This article reviews the detection methods of aminoglycoside antibiotics in animal-derived foods, including enzyme-linked immunosorbent assay, fluorescent immunoassay, chemical immunoassay, affinity sensing assay, lateral flow immunochromatography and molecular imprinted immunoassay. After evaluating the performance of these methods, the advantages and disadvantages were analyzed and compared. Furthermore, development prospects and research trends were proposed and summarized. This review can serve as a basis for further research and provide helpful references and new insights for the analysis of aminoglycoside residues. Accordingly, the in-depth investigation and analysis will certainly make great contributions to food safety, public hygiene and human health.