Energy Requirements Research Articles

Evaluating energy efficiency and environmental sustainability in fiberglass prefabricated modular structures

Fiberglass (FG) modular buildings are gaining increasing attention in the construction industry due to their adaptability, and potential for cost and time savings. This study compares the FG modular, house-like cubicles to concrete counter parts with respect to the environmental impacts and cost. The scope of the study encompasses the production and operational phase, especially air conditioning (AC) systems in hyper-arid climates. The effectiveness of insulation, quantified through R-value calculations, is evaluated across varying insulation thicknesses using Life Cycle Assessment (LCA). The results indicate that AC energy requirements significantly contribute to the climate change impact (CCH), accounting for 77 % and 90.5 %, in concrete and FG modules respectively. FG modules exhibit significantly higher environmental impacts compared to concrete modules in agricultural land occupation (+142.7 %), terrestrial ecotoxicity (+80.6 %), and urban land occupation (+66 %). Employing Net Present Value (NPV), the annual cost for FG and concrete modules was USD 963.9 and USD 550.8 per year, respectively. Sensitivity analysis indicates that increasing insulation (+5.00 cm) in FG modules reduces that annual cost due to cooling by 16.55 %, reduces CCH by 59.47 % but increases metal depletion by 130 %. This signifies the importance of incorporating the use phase when evaluating innovative building materials and methods.

A Comparison of a Three Blade and Five Blade Wind Turbine in Terms of the Mechanical Properties Using the Q-Blade Software

يمكن لتوربينات الرياح المنتشرة في مزارع الرياح على نطاق المرافق أن تدعم تلبية رغبات الطاقة المستقبلية وتقليل انبعاثات ثاني أكسيد الكربون عن طريق تقليل متطلبات الطاقة من الوقود الأحفوري. مع ارتفاع درجة حرارة الهواء على مدار اليوم، تزداد سرعة الرياح بسبب تدرجات درجة الحرارة، والتي تنتج تدرجًا في الكثافة / الضغط، مما يؤدي إلى حركة الهواء التي تواجهها توربينات الرياح. اعتمادًا على تضاريس الأرض، يمكن أن تواجه الرياح وتوجه في الوديان بين التلال وفوقها حيث تتدفق وتتبع منحنيات الأرض. تنتج هذه التضاريس زيادة في سرعة الرياح في القمم والتلال. في هذا العمل، تم تصميم شفرة دوار توربينات الرياح الأفقية الصغيرة للعمل في ظل سرعة الرياح المنخفضة، باستخدام برنامج (Q-Blade). استنادًا إلى نظرية عنصر الشفرة (BEM). مع الجنيح NACA3712. تم استخدام دوار ثلاثي الشفرات ودوار بخمس شفرات بناءً على نوع التوربين وحجم الدوار لتوليد الطاقة الميكانيكية من طاقة الرياح. تم إجراء مقارنة وتحليل قوة التوربين ومعامل القدرة ومعامل عزم الدوران عند سرعة رياح منخفضة ((1m/s-8m/s وتم الحصول على نتائج دقيقة للغاية. وجد أن أفضل أداء يمكن أن يعمل فيه دوار توربيني ثلاثي الشفرات بقدرة توربينية تبلغ (955W) كما تم الحصول على قدرة التوربين ((582W للدوار خماسي الشفرات. وجد أن تصميم توربينة رياح أفقية صغيرة بخمس ريش أفضل من التوربين بثلاث ريش ومناسب للعمل في المناطق ذات سرعة الرياح المنخفضة وبكفاءة عالية مقارنة بحجم التوربين.

Nanosized Hyperbranched Cobalt and Metal-free Phthalocyanine Intercalated with Pd-C Matrix Using PVA-TEOS as Binder for Admirable Supercapacitor Properties

The expanding global economy resulted mainly from consuming fossil fuels, which are scarce and cause prodigious environmental harm. Mankind is shifting towards sustainable, efficient and clean energy sources known as green energy. The storage of green energy is an urge of time, to fulfil the energy requirements. Supercapacitors are gaining popularity in the field of energy storage due to their excellent safety, cost-effectiveness, and environmental friendliness. The forthright strategy of using a nitrogen-rich phthalocyanine macrocycle as a nanosized particle is to increase surface area resulting in a high specific capacitance. Herein, an innovative approach has been made by synthesising nanosized hyperbranched metal-free/Co-Phthalocyanine characterized by various analytical and spectroscopic techniques. The morphology of the composite was confirmed through physicochemical characterization like BET, SEM, XRD and electrochemical features were studied through cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS). The electrode modification was carried out using the binder Poly (vinyl alcohol)-Tetraethyl orthosilicate (PVA-TEOS) crosslinked hybrid solution. The intercalated nanosized palladium on carbon matrix with HBCoPc and HBPc at different ratios enhanced the performance of capacitance. Amongst all the ratios, HBCoPc: Pd-C with 30:70 ratio has demonstrated superior specific capacitance of 824.25 F g-1 at 0.5 A g-1. Additionally, the fabricated electrode of HBCoPc: Pd-C and HBPc: Pd-C has exhibited good capacitance retention of 84.03% and 81.01% over 5000 cycles, respectively. This work delivers a promising approach towards the development of high-performance supercapacitors using metal phthalocyanine/ metal-carbon composites as a new way to manufacture devices for conversion and energy storage.

Process development and Techno-Economic analysis for combined and separated CO2 Capture-Electrochemical utilization

Combining CO2 capture and utilization into a single unit operation offers a feasible solution for converting a sustainable feedstock into marketable commodity chemicals, while reducing energy requirements from separated processes. In this research, we developed a process model and performed a techno-economic analysis (TEA) for point-source CO2 capture and electrochemical-based utilization in light olefins production under both separated and integrated scenarios. CO2 containing flue gas from a 500 MW power plant was utilized as a feed while CO2 utilization involved electrochemical reduction reactions to produce light olefins directly from CO2. A meticulous analysis was conducted, probing into the multifaceted impacts of various operational parameters, material properties, and downstream treatment units. Factors such as pressure, temperature, H2O/CO2 molar ratio, catalyst and adsorbent activities, deactivation rate, and heat integration were optimized to achieve 95 % CO2 recovery and > 90 % conversion, and > 85 % ethylene yield. Through a comprehensive TEA, our findings unveiled that the combined process utilizing bifunctional adsorbent/catalyst materials (BFMs) incurs costs of approximately $284/ton CO2, whereas the separated process reported expenses of ∼$516/ton CO2. This study, pivotal in its contributions, evaluated economic feasibility of combined capture-conversion method based on BFMs for CO2 removal (CDR) and subsequent utilization via a promising advanced process model for sustainable feedstocks conversion to commodity chemicals.

Targeting Mitochondria: Influence of Metabolites on Mitochondrial Heterogeneity.

Mitochondria are vital organelles that provide energy for the metabolic processes of cells. These include regulating cellular metabolism, autophagy, apoptosis, calcium ions, and signaling processes. Despite their varying functions, mitochondria are considered semi-independent organelles that possess their own genome, known as mtDNA, which encodes 13 proteins crucial for oxidative phosphorylation. However, their diversity reflects an organism's adaptation to physiological conditions and plays a complex function in cellular metabolism. Mitochondrial heterogeneity exists at the single-cell and tissue levels, impacting cell shape, size, membrane potential, and function. This heterogeneity can contribute to the progression of diseases such as neurodegenerative diseases, metabolic diseases, and cancer. Mitochondrial dynamics enhance the stability of cells and sufficient energy requirement, but these activities are not universal and can lead to uneven mitochondria, resulting in heterogeneity. Factors such as genetics, environmental compounds, and signaling pathways are found to affect these cellular processes and heterogeneity. Additionally, the varying roles of metabolites such as NADH and ATP affect glycolysis's speed and efficiency. An imbalance in metabolites can impair ATP production and redox potential in the mitochondria. Therefore, this review will explore the influence of metabolites in shaping mitochondrial morphology, how these changes contribute to age-related diseases and the therapeutic targets for regulating mitochondrial heterogeneity.

Development and evaluation of a self-adaptable planting unit for an autonomous planting process of field vegetables

Today, the number of solutions for automated processes in agriculture is growing rapidly. This is primarily driven by the lack of available and affordable labour, pricing pressures, and regulatory requirements. Vegetable production in particular has a lot of potential for automation, as many process steps, such as planting, are performed partly manually. Fully automated systems for the planting process are characterized by their big size, which is only suitable for large farms. At the same time, these planters typically have a low level of intelligence, which is essential for a fully autonomous planting process performed by autonomous vehicles or robots. The following work therefore deals with the development and construction of a prototype for vegetable planting via a robotic platform. This prototype is designed to meet the requirements of a conventional planter and carry out the planting process automatically using a robotic platform. To ensure a robust robotic planting process, an AI-based control system has been integrated that can detect and adjust the planting quality. For this reason, the planting unit was designed to allow dynamic changes in working depth and furrow width. By dynamically controlling these planting parameters, there is potential for a more sustainable planting process with lower energy requirements. A number of evaluations have been carried out to validate the described characteristics of the prototype planting unit.

Multi-criteria Decision Making Methods and sustainable Appliations in the Digital Age

Abstract: Designing a sustainable electrification system for remote places in developing countries is very complex while considering various factors such as technical, economic, environmental and social (TEES). Development of an efficient, rational, coherent and a translucent framework is required to address issues related to the requirement of energy needs based on the end user. The main goal of this research is to design a methodological framework based on decision analysis and optimized model with locally available energy sources. The new optimal renewable energy options are required to be used to minimize the fossil fuel dependency of electrical generation. Initially, suitable energy alternatives are selected by considering different criterion with multiple scenarios for decision analysis. The further optimal combination of energy sources evaluated for different possibilities. The new methodology of hybrid renewable optimization is applied to a rural place, Himachal Pradesh to illustrate its effectiveness based on metrological data

Study of the Management of the Electrical Energy Production and Distribution System Within the National School of Teachers of Mamou, Guinea

With the energy transition, marked essentially by the mass integration of energy production based on renewable resources, the missions and challenges of electrical energy distribution networks are evolving. This study is part of this dynamic, its objective is the study of the management of the production and distribution system of electrical energy within the National School of Teachers of Mamou. It emerges from this study that the supply of electrical energy to the National School of Teachers of Mamou is ensured by a hybrid system of three power sources: photovoltaic solar fields, Generator Group and Electricity of Guinea. The current electrical energy requirements of the Mamou NST are 40 kW. The total power of the installed photovoltaic solar fields is 70 kWp; the Generator used has a power of 10 kVA; the site’s Electricity of Guinea network is made up of transformers, cabin substations and protective equipment. The electricity distribution network is characterized by: Four (4) 250 A circuit breakers; a 32 A circuit breaker for the departure of lamps, sockets and fans; a 10 A circuit breaker for the lamps; a 10 A circuit breaker for the fans; a 16 A circuit breaker for the sockets and an 800 A mechanical inverter. The study shows that the power of photovoltaic solar fields is largely sufficient to cover the current electrical energy needs of the National School of Teachers of Mamou.

Potential adaptation of scleractinian coral Pocillopora damicornis during hypo-salinity stress caused by extreme pre-flood rainfall over south China

Global warming intensifies the water cycle, resulting in significant increases in precipitation and river runoff, which brings severe hypo-salinity stress to nearshore coral reefs. Ecological investigations have found that some corals exhibit remarkable adaptability to hypo-salinity stress during mass-bleaching events. However, the exact cause of this phenomenon remains unclear. To elucidate the potential molecular mechanism leading to high tolerance to hypo-salinity stress, Pocillopora damicornis was used as a research object in this study. We compared the differences in transcriptional responses and symbiotic microbiomes between bleaching and unbleaching P. damicornis during hypo-salinity stress caused by extreme pre-flood rainfall over South China in 2022. The results showed that: (1) Under hypo-salinity stress, the coral genes related to immune defense and cellular stress were significantly upregulated in bleaching corals, indicating more severe immune damage and stress, and the Symbiodiniaceae had no significant gene enrichment. Conversely, metabolic genes related to glycolysis/gluconeogenesis were significantly downregulated in unbleaching corals, whereas Symbiodiniaceae genes related to oxidative phosphorylation were significantly upregulated to meet the energy requirements of coral holobiont; (2) C1d was the dominant Symbiodiniaceae subclade in all samples, with no significant difference between the two groups; (3) The symbiotic bacterial community structure was reorganized under hypo-salinity stress. The abundance of opportunistic bacteria increased significantly in bleaching coral, whereas the relative abundance of probiotics was higher in unbleaching coral. This may be due to severe immune damage, making the coral more susceptible to opportunistic infection and bleaching. These results suggest that long-term hypo-salinity acclimation in the Pearl River Estuary enhances the tolerance of some corals to hypo-salinity stress. Corals with higher tolerance may reduce energy consumption by slowing down their metabolism, improve the energy metabolism of Symbiodiniaceae to meet the energy requirements of the coral holobiont, and alter the structure of symbiotic bacterial communities to avoid bleaching.

Enhancing energy efficiency: Design and simulation of air fractionation unit integrated through LNG cold energy and two‐stage organic Rankine cycles

AbstractThe study explores air separation processes, proposing an innovative design incorporating liquid natural gas (LNG)'s two‐stage Rankine cycles to address traditional approaches' complexity and energy intensity. Significant wastage of energy during air compression in standard units is recuperated for liquefied natural gas regasification, with a focus on enhancing cold energy recovery, emphasizing cryogenic LNG advantages. Aspen HYSYS (12.1) is used for process modelling and simulation evaluating a combined two‐stage Rankine cycle integrated into air separation. Specific energy requirements for high‐purity oxygen and nitrogen production are reduced to 0.38 and 0.12 kWh/kg, respectively. The integrated Rankine cycle generates 4456.32 kW, which is sufficient for air separation process. Exergy destruction and component efficiency are explored and parametric optimization, revealing LNG variables' significant impact. Economic analysis indicates a fair 5.25‐year payback period. This approach aligns with sustainability goals, providing a compelling efficiency‐enhancing option for the LNG sector.

Optimal design and techno-economic analysis of a solar-wind hybrid power system for laayoune city electrification with hydrogen and batteries as a storage device

The pressing environmental concerns associated with fossil fuels have propelled renewable energy sources, particularly solar and wind energy, into a more prominent position. This article aims to explore an optimal configuration and conduct a technical and economic analysis of a hybrid solar-wind energy system tailored for electrifying Laayoune city. This system, equipped with hydrogen tank and batteries as storage devices, aims to meet the annual energy requirements of residential areas estimated at 310.87 GWh/year. In addition to addressing energy needs, the study tackles significant challenges such as reducing dependence on traditional energy sources, curbing greenhouse gas emissions, and bolstering energy security in the region. Utilizing HOMER Pro software, the research evaluates various combinations of renewable resources, including solar and wind, alongside storage solutions such as batteries, fuel cells, and hydrogen storage, to find the most viable solution in terms of electricity generation, cost, and environmental impact. The findings highlight a hybrid configuration comprising solar, wind, battery, grid, and converter components as the most cost-effective approach for Laayoune's renewable energy system. This integrated system not only yields an energy cost of 0.0477 $/kWh and a net present cost (NPC) of 336 M$ but also generates 627.69 GWh/year of energy. Furthermore, it achieves a 100% renewable energy ratio while completely eliminating CO2 emissions.

Onset in late adolescence of schizophrenia: Could melatonin modulate this debut?

Schizophrenia, one of the most serious and widespread mental disorders in the world, makes its debut often in late adolescence and early adulthood, which allows us to focus our attention on those brain areas that still retain plasticity during this period. Parvalbumin interneurons, GABAergic and inhibitory, in both cortical and hippocampal areas, maintain their plasticity and are particularly vulnerable to oxidative stress due to their high energy requirements. Evidence has shown that their damage favors the triggering of schizophrenia by altering the neurobehavioral development of individuals. These neurons have melatonin receptors of MT1 and MT2, and the cytoprotective role of melatonin has been reported on these neurons. However, the role of this indolamine played in adolescence in protecting parvalbumin interneurons, reducing their oxidative stress and/or preventing their disappearance, which could prevent the onset of schizophrenia, is not yet known. The importance of this activity and its implications on patient therapy require the urgent studies

Prevalence and correlates of undernutrition in children of 6-60 months of the age living in urban slums of Mumbai, India: a cross-sectional study

Background: In urban slums, several socio-demographic factors contribute for the occurrence of undernutrition in children, this study aimed at assessment of prevalence and correlates of undernutrition in children of 6-60 months of the age in an urban slum of Mumbai and to study associated factors. Methods: A cross-sectional study was conducted in urban slum which is a field practice area of institution. Children of 6-60 months of the age were included in the study. Data was analysed with SPSS v.22.0 with suitable tests. Results: Prevalence of undernutrition was found 50.6%, more per cent of undernutrition was found in 25-60 months age 100 (54.1%), 90 (53.3%) girls, 132 (51%) nuclear family dwellers, in 9 (56.3.3%) and 39 (50.0%) children defecation practices in anywhere and open within compound. About 75 (72.1%) children whose mother not practiced hand washing before eating/handling food, 90 (63.8%) children whose mother not practiced hand washing with soap and water after defecation, 20 (80.0%) children whose mother’s hands appeared were unclean and 106 (94.6%) children who intake of daily energy requirement were inadequate, 139 (72.4%) children who intake of daily protein requirement were inadequate. 88 (71.5%) children with undernutrition belonged to class IV, (B. G. Prasad classification) and it was statistically significant association of undernutrition. Conclusions: Mumbai’s urban slums continue showing a higher prevalence of undernutrition, and is significantly influenced by inadequate intake of daily requirement of protein, unclean water, poor sanitation and hygiene, and with the improvement in these socio-demographic factors, enhancement in the nutritional state of the child is expected.

Experimental Assessment of Energy Potentials from Tea Wastes as a Source of Energy: A Case of Itona Tea Factory in Tanzania

Tea processing is an energy-intensive process. However, high agricultural productivity and subsequently the growth of the green revolution have been made possible only by a large amount of energy inputs, especially those from fossil fuels, wood fuels, and electricity. With recent price rise and scarcity of these fuels there has been a trend towards use of alternative energy sources such as waste (agricultural waste) to energy that could solve both energy and environment issues. Moreover, these energy resources have not been able to provide an economically viable solution for agricultural applications so long as they seem to contain amount of energy which can be source of energy to be used in various factories in rural areas through gasification process. A gasifier is normally fuel specific system and it is tailored around a fuel rather than the other way round. Hence, this paper presents an experimental assessment of energy potentials from tea wastes available at Itonaa Tea Factory for tea drying processes as important data for agricultural wastes. The experimental measurement of energy potential from tea wastes was done using bomb calorimeter, muffle furnace and energy balances to determine calorific value moisture content and energy potentials of tea waste respectively. The findings indicate that the combined energy potential of factory and garden tea waste was found to be 2.78x10<sup>8</sup>kWh, and corresponding electrical energy was estimated to be 2.78x10<sup>7</sup>kWh which is enough for tea drying process in tea manufacturing plant. The total energy used in the production of tea was discovered to be equal 3.5 - 7.5 kWh/kg of made tea. Thus, total energy consumption (4.5 kWh/kg of made tea) for processing of 9.6 x 10<sup>6</sup> kg of tea from 4.5 x 10<sup>3</sup> hectares of tea plantation in Mufindi for the period of 2021-2022 was 4.32x10<sup>7</sup> kWh. Thus, with the proper utilization of energy conversion technology of tea waste, part of the energy requirement in processing of tea could be met reducing environmental challenges associated with both wood fuel burning and tea waste disposal.

Extracting dashcam telemetry data for predicting energy use of electric vehicles

Prior to the acquisition of an electric vehicle, pre-evaluation of vehicle energy use is desirable to assess whether the intrinsic vehicle electrical storage capability is satisfactory. However, inconsistency in general vehicle modelling may provide unreliable predictions concerning energy usage. To increase the prediction reliability, the use of route-specific driving cycle data is essential.This paper presents a case study of a novel method of extracting vehicle telemetry data from archived dashcam videos without the need to deploy conventional telemetry techniques. Utilising dashcam videos as input, and employing image processing and recognition technology, textual en-route driving data embedded in the video can be extracted. This data can then, in-turn, be used to model the performance of the vehicle, or an electric equivalent in terms of energy use and emissions. Results from preliminary testing with real-life dashcam videos, demonstrate negligible errors with regards to energy requirements and pollutants emitted from an EV operating on the modelled routes. Consequently, the proposed solution opens up the possibility to gather a significant amount of new data in order to better assess the transport sector’s energy requirements. This is especially important for situations where conventional telemetry is difficult to obtain. In addition, results from vehicle fleet modelling may inform policy decisions with regard to the impact of introducing low emission zones.

Energy Expenditure in Humans: Principles, Methods, and Changes Throughout the Life Course.

Humans require energy to sustain their daily activities throughout their lives. This narrative review aims to (a) summarize principles and methods for studying human energy expenditure, (b) discuss the main determinants of energy expenditure, and (c) discuss the changes in energy expenditure throughout the human life course. Total daily energy expenditure is mainly composed of resting energy expenditure, physical activity energy expenditure, and the thermic effect of food. Total daily energy expenditure and its components are estimated using variations of the indirect calorimetry method. The relative contributions of organs and tissues determine the energy expenditure under different physiological conditions. Evidence shows that energy expenditure varies along the human life course, at least in part due to changes in body composition, the mass and specific metabolic rate of organs and tissues, and levels of physical activity. This information is crucial to estimate human energy requirements for maintaining health throughout the life course.

Interfacial stability and electronic properties of YBCO/ABO3 heterostructures: A comparative DFT study

In this study, we utilized density functional theory (DFT) to analyze the interfacial properties of YBa2Cu3O7 (YBCO) with perovskite metal oxides LaAlO3 (LAO), KTaO3 (KTO), and SrTiO3 (STO). We focused on surface energies, lattice mismatches, strain energies, and adhesion energies to gauge the stability and compatibility of these interfaces. Our findings indicate that KTO exhibits the highest surface preference due to its lowest surface energy (0.054 eV/Å 2), suggesting superior surface stability. Moreover, LAO and STO show minor lattice mismatches with YBCO, implying effective interface integration, while YBCO/KTO interfaces experience significant strain due to extensive lattice mismatches. STO is distinguished by the lowest strain energy (0.07 eV), indicating minimal energy requirement for lattice mismatch accommodation, unlike KTO, which demonstrates high strain energy (0.42 eV) and potential structural distortions. The strongest interfacial bond, as indicated by an adhesion energy of −2.16 eV, was observed at YBCO/LAO, while the weakest was found at the YBCO/KTO interface, with an adhesion energy of −0.56 eV. Additionally, charge density difference (CDD) analysis highlighted electron density redistribution at the interfaces, predominantly around interfacial oxygen atoms, indicating a mix of ionic and covalent bonding. This study provides comparative insights into the interfacial characteristics of YBCO/ABO3 heterostructures, suggesting pathways for optimizing their design and performance.

The Physiological Consequences of and Recovery following the Australian Special Forces Selection Course.

This study aimed to determine the energy requirements, physiological consequences, and recovery rate from the Australian Special Forces Selection Course. Ninety-three male soldiers (mean ± SD, 28.1 ± 3.6 y, 1.81 ± 0.1 m, 85.1 ± 8.1 kg) volunteered for this study. Body composition via dual-energy x-ray absorptiometry, hormones and resting metabolic rate were assessed before, immediately after, and at one, three, five, and eight weeks post-course. Energy expenditure, assessed via doubly-labelled water during the first 10 days of the course significantly exceeded energy intake (expenditure: 7680 ± 1095 kcal.d-1, intake: 3859 ± 704 kcal.d-1). Body mass (△ -6.8 ± 1.9 kg, p<0.01), fat mass (△ -4.2 ± 1.0 kg, p<0.0001) and lean mass (△ -3.0 ± 1.7 kg, p<0.0001) were significantly reduced in response to the course and returned to baseline 1-3 weeks post-course. Total testosterone, free testosterone, free triiodothyronine, free thyroxine and insulin like growth factor-1 significantly (p<0.001) declined following the course, while cortisol and sex hormone binding globulin increased (p<0.001). All hormones, except insulin like growth factor-1, returned to baseline concentrations within 1-3 weeks post-course. Resting metabolic rate decreased (p<0.01) in response to the course, and subsequently rebounded above baseline levels at one week post-course. The Special Forces Selection Course involved high energy output and a substantial caloric deficit, resulting in body mass loss and significant hormonal disruption that took weeks to recover. These results highlight the energy requirements, physiological consequences, and recovery processes from the Australian Special Forces Selection Course.

The Roles of Psychosocial Factors and Nutritional Intervention on Eating Disorders

With a multifaceted and intricate etiology, eating disorders are classified as mental diseases. The etiology of eating disorders includes sociocultural factors such as family and childhood experiences, societal and cultural pressures, imposition of media standards, as well as psychological factors such as low self-esteem and body dissatisfaction, stress, anxiety, mood disorders, trauma, and perfectionism. To provide a nutritional intervention that includes the normalization of eating behavior, it is necessary to understand the psychosocial aspects underlying the illness of individuals with eating disorders. Because a dietitian may be the first person to recognize the symptoms of an individual's eating disorder, which is a psychiatric disorder, or the first healthcare professional to whom a patient applies for this condition, and dietitians are a critical member of the treatment team of these patients. During the planning of nutritional intervention; practices such as defining nutritional problems related to medical or physical condition, evaluating anthropometric measurements and biochemical data, examining behavioral and environmental factors, calculating energy and macronutrient requirements, increasing the amount and variety of foods consumed, and giving recommendations regarding the normal perception of hunger and satiety constitute the basic processes of nutrition intervention planned in line with appropriate weight restoration and health goals. In this process, providing psychosocial support and positive reinforcement by considering the changing needs of the individual may help to increase their commitment to the process. Being in constant cooperation and communication with the healthcare professionals involved in the treatment and the family of the individual during the treatment period constitutes an integral part of a well-managed treatment process. In this respect, the health professionals in the treatment team informing the other members of the team by considering the etiological factors of the eating disorder and providing a joint decision-making environment makes a great contribution to the treatment process.

Climate neutrality of the French energy system: overview and impacts of sustainable aviation fuel production

CO2 emission reduction of sectors such as aviation, maritime shipping, road haulage, and chemical production is challenging but necessary. Although these sectors will most likely continue to rely on carbonaceous energy carriers, they are expected to gradually shift away from fossil fuels. In order to do so, the prominent option is to utilize alternative carbon sources—like biomass and CO2 originating from carbon capture—for the production of non-fossil carbonaceous vectors (biofuels and e-fuels). However, the limited availability of biomass and the varying nature of other carbon sources necessitate a comprehensive evaluation of trade-offs between potential carbon uses and existing sources. Then, it is primordial to understand the origin of carbon used in sustainable aviation fuel (SAF) to understand the implications of defossilizing aviation for the energy system. Moreover, the production of SAF implies deep changes to the energy system that are quantified in this work. This study utilizes the linear programming cost optimization tool EnergyScope TD to analyze the holistic French energy system, encompassing transport, industry, electricity, and heat sectors while ensuring net greenhouse gas neutrality. A novel method to model and quantify carbon flows within the system is introduced, enabling a comprehensive assessment of greenhouse gas neutrality. This study highlights the significance of fulfilling clean energy requirements and implementing carbon dioxide removal measures as crucial steps toward achieving climate neutrality. Indeed, to reach climate neutrality, a production of 1,046 TWh of electricity by non-fossil sources is needed. Furthermore, the findings underscore the critical role of efficient carbon and energy valorization from biomass, providing evidence that producing fuels by combining biomass and hydrogen is optimal. The study also offers valuable insights into the future cost and impact of SAF production for air travel originating from France. That is, the European law ReFuelEU would increase the price of plane tickets by +33% and would require 126 TWh of hydrogen and 50 TWh of biomass to produce the necessary 91 TWh of jet fuel. Finally, the implications of the assumption behind the production of SAF are discussed.