AbstractTissue engineering approach aims to overcome the transplant drawbacks and facilitate tissue repair and regeneration. Here, a new conductive, highly porous, and flexible polycaprolactone/gelatin/polypyrrole/graphene 3D scaffolds for nerve tissue repair is presented. A simple and efficient porogen leaching fabrication method is applied to create a 3D network with a pore radius of 3.8 ± 0.7 to 4.2 ± 0.8 μm with an exceptional uniform circular porous structure. The conductivity of the polymeric scaffold without graphene, in wet conditions, was found to be 0.78 ± 0.1 S.m−1 and it increased to 3.3 ± 0.2 S.m−1 for the optimized sample containing 3wt% graphene (G3). Tensile strength was measured at 163 KPa for the base sample (without graphene) and improved to 526 KPa for G3 sample. Following 42 days of incubation in PBS, 32.5% degradation for the base sample (without graphene) was observed. The cell study demonstrated a non‐cytotoxic nature of all scaffolds tested and the cells had mostly stretched and covered the surface. Overall, the sum of results presented in this study demonstrate a simple fabrication platform with extraordinary aspects that can be utilized to mimic the native conductive tissue properties, and also because of its flexibility it can easily be rolled into a nerve conduit to fill gaps in nerve tissue regeneration.