Renewable Applications Research Articles

Scientific opinion on the renewal of the authorisation of Smoke Concentrate 809045 (SF-003) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Smoke Concentrate 809045 (SF-003), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. Product Smoke Concentrate 809045 is obtained by pyrolysis of beech wood. The Panel concluded that the compositional data provided on the Primary Product are adequate. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.1 to 1.5 mg/kg body weight (bw) per day at the mean and from 0.2 to 5.2 mg/kg bw per day at the 95th percentile. The Panel concluded that eleven components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one and benzene-1,2-diol, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for these two components are above the threshold of toxicological concern (TTC) of 0.0025 μg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity.

Scientific opinion on the renewal of the authorisation of Zesti Smoke Code 10 (SF-002) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Zesti Smoke Code 10 (SF-002), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of thePrimary Product. Zesti Smoke Code 10 is obtained by pyrolysis of hickory and oak woods. Given the limitations of the quantification approach employed by the applicant, the Panel could not judge whether the applied methods meet the legal quality criterion that at least 80% of the volatile fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.02 to 4.6 mg/kg body weight (bw) per day at the mean and from no dietary exposure to 13.0 mg/kg bw per day at the 95th percentile. The Panel concluded that four components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one and benzene-1,2-diol, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for these two components are above the threshold of toxicological concern (TTC) of 0.0025 μg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity.

Scientific opinion on the renewal of the authorisation of SmokEz C-10 (SF-005) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product SmoKEz C-10 (SF-005), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. SmoKEz C-10 is obtained by pyrolysis of maple, oak, hickory, ash, birch, beech and cherry woods. Given the limitations of the quantification approach employed by the applicant, the Panel could not judge whether the applied methods meet the legal quality criterion that at least 80% of the volatile fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.01 to 5.1 mg/kg body weight (bw) per day at the mean and from no dietary exposure to 18.1 mg/kg bw per day at the 95th percentile. The Panel concluded that five components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one and benzene-1,2-diol, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for these two components are above the threshold of toxicological concern (TTC) of 0.0025 μg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity.

Scientific opinion on the renewal of the authorisation of SmokEz Enviro-23 (SF-006) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product SmokEz Enviro-23 (SF-006), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. SmokEz Enviro-23 is obtained by pyrolysis of oak, maple, hickory, ash, birch, beech and cherry woods. Given the limitations of the quantification approach employed by the applicant, the Panel could not judge whether the applied methods meet the legal quality criterion that at least 80% of the volatile fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.01 to 3.2 mg/kg body weight (bw) per day at the mean and from no dietary exposure to 9.5 mg/kg bw per day at the 95th percentile. The Panel concluded that four components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one and benzene-1,2-diol, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for these two components are above the threshold of toxicological concern (TTC) of 0.0025 μg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity.

Scientific opinion on the renewal of the authorisation of Fumokomp (SF-009) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Fumokomp (SF-009), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003 (in the renewal application the Primary Product is reported as 'Fumokomp Conc.'). This opinion refers to an assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. Fumokomp Conc. is produced by pyrolysis of beech and hornbeam woods. Gas chromatography-mass spectrometry (GC-MS) was applied for both identification and quantification of the volatile constituents of the Primary Product. Given the limitations of the method, the Panel cannot judge with confidence whether the applied method meets the legal quality criterion that at least 80% of the volatile fraction shall be identified and quantified. Moreover, the Panel concluded that the absence of furan-2(5H)-one from the Primary Product was not convincingly demonstrated. At the maximum proposed use levels, dietary exposure estimates calculated with FAIM ranged from 0.04 to 0.9 mg/kg body weight (bw) per day at the mean and from 0.1 to 1.5 mg/kg bw per day at the 95th percentile. The information available on the 32 identified components of the Primary Product, although limited, did not indicate a concern for genotoxicity for any of these substances. However, whole mixture testing in an in vitro mouse lymphoma assay gave positive results which would require an adequate in vivo follow-up study. In addition, the potential for aneugenicity of the Primary Product has not been adequately investigated. Accordingly, the potential safety concern for genotoxicity of the Primary Product cannot be ruled out.

Scientific opinion on the renewal of the authorisation of Scansmoke SEF7525 (SF-004) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Scansmoke SEF7525 (SF-004), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. Scansmoke SEF7525 is obtained from a tar produced from a mixture of red oak, white oak, maple, beech and hickory. Based on the compositional data, the Panel noted that the identified and quantified proportion of the solvent-free fraction amounts to 32.6 weight (wt)%, thus the applied method does not meet the legal quality criterion that at least 50% of the solvent-free fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with Food Additive Intake Model (FAIM) ranged from 0.6 to 3.8 mg/kg body weight (bw) per day at the mean and from 1.1 to 10.1 mg/kg bw per day at the 95th percentile. Based on the available information on genotoxicity on 44 identified components, the Panel concluded that two substances in the Primary Product, styrene and benzofuran, raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. Considering that the exposure estimates for styrene and benzofuran are above the threshold of toxicological concern (TTC) value of 0.0025 kg/kg bw per day for DNA-reactive mutagens and/or carcinogens and since further data are needed to clarify their potential genotoxicity, the Panel concluded that the potential safety concern for genotoxicity of the Primary Product cannot be ruled out.

Scientific opinion on the renewal of the authorisation of proFagus Smoke R714 (SF-001) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product proFagus Smoke R714 (SF-001), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. ProFagus Smoke R714 is obtained by pyrolysis of beech and oak woods as main source materials. Based on the compositional data, the Panel noted that the identified and quantified proportion of the solvent-free fraction amounts to 39 weight (wt)%, thus the applied method does not meet the legal quality criterion that at least 50% of the solvent-free fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.7 to 10.9 mg/kg body weight (bw) per day at the mean and from 2.2 to 42.5 mg/kg bw per day at the 95th percentile. The Panel concluded that three components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for this component are above the threshold of toxicological concern (TTC) of 0.0025 μg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity.

Scientific opinion on the renewal of the authorisation of proFagus Smoke R709 (SF-008) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product proFagus Smoke R709 (SF-008), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. ProFagus Smoke R709 is obtained by pyrolysis of beech and oak wood as main source materials. The panel concluded that the compositional data provided on the Primary Product are adequate. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.8 to 12.2 mg/kg body weight (bw) per day at the mean and from 2.3 to 51.4 mg/kg bw per day at the 95th percentile. The Panel concluded that three components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for this component are above the TTC of 0.0025 μg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the panel concluded that the Primary Product raises concern with respect to genotoxicity.

Food packaging Bio-based plastics: Properties, Renewable Biomass resources, Synthesis, and Applications

The current trend in food packaging technology necessitates the development of novel packaging materials in order to extend the shelf life of food and reduce spoliation. To preserve the food product, the construction material of the packaging played a key role.In the emerging field of food packaging technology, using biobased plastics for food packaging shown a comparative advantage.At this moment, bioplastics have shown measurable benefits and are receiving more and more attention from business organizations, political figures, scientific communities, and in the whole public. This was as a result of looking for new plastic profiles brands. Besides, the environmental impact(ecological concerns) of convective materials, the depletion of natural resources specifically the petrochemical, and consumer concerns have necessitated alternative bio-based food packaging items. Therefore, the aim of this study was to review the properties of food packaging materials such as thermal, mechanical, barrier, surface, antimicrobial, optical, and environmental, as well as their synthesis type and applications. The cellulose and starch components of the common agricultural wastes for the synthesis of biopolymers were elaborated. In addition to that, different microalgae species were justified in the manufacturing of bio-based plastics.This review article also included examples of sustainable filler and reinforcement materials used in the food packaging industry. Therefore, this review work contributes to opening up the entire body of scientific knowledge on bio-based plastics used for food packaging and helps to develop important results for further investigation.

Hierarchically fabricated nano flakes-rod-like CoMoO–S supported Ni-foam for high-performance supercapacitor electrode material

Nano-sized CoMoO has emerged as a gifted contender for renewable energy conversion storage applications. However, the limited stability and unique surface areas of oxide-based materials present challenges in the use of supercapacitors (SCs). In this work, we employed a facile hydrothermal method to hierarchically fabricate nanoflakes-rod-like CoMoO–S materials on nickel foam (NF). The resulting electrodes exhibited remarkable electrochemical activity, attributed to the synergistic properties of the well-allied CoMoO 2D nanorods. Notably, the developed CoMoO–S nanoflakes-rod (3D-2D) composites proved an excellent specific capacitance of 1087 F g−1 at 2 A/g current density, along with excellent rate capabilities surpassing those of single CoMoO nanorods electrodes. Furthermore, the CoMoO–S nanoflakes-rod composites exhibited notable cyclic stability, with a retention rate of 86.3 % above 5000 cycles. The exceptional electrochemical characteristics displayed by electrode materials typically used in batteries provide a hopeful strategy for the advancement of high-performance supercapacitors.

An Accurate Piecewise Aging Model for Li-ion Batteries in Hybrid Renewable Energy System Applications

An Accurate Piecewise Aging Model for Li-ion Batteries in Hybrid Renewable Energy System Applications

Assessment of the feed additive consisting of Enterococcus lactisDSM 7134 and Lacticaseibacillus rhamnosusDSM 7133 (Provita LE) for calves for rearing for the renewal of its authorisation (Lactosan GmbH & Co.KG).

Following a request from the European Commission, EFSA was asked to deliver a scientific opinion on the assessment of the application for renewal of the authorisation of the additive Provita LE for calves for rearing, consisting of Enterococcus lactis DSM 7134 (formerly identified as Enterococcus faecium) and Lacticaseibacillus rhamnosus DSM 7133 (formerly identified as Lactobacillus rhamnosus) as a zootechnical feed additive. The applicant has provided evidence that the additive currently on the market complies with the existing terms of the authorisation. The FEEDAP Panel concluded that the use of the feed additive in animal nutrition remains safe for calves for rearing, consumers and the environment under the authorised conditions of use. The additive is not irritant to skin or eyes but should be considered a respiratory sensitiser. It was not possible to draw conclusions on the skin sensitisation potential of the additive under assessment. There was no need for assessing the efficacy of the additive in the context of the renewal of the authorisation.

Assessment of the feed additive consisting of orthophosphoric acid for all animal species for the renewal of its authorisation (Prayon S.A.; Chemische Fabrik Budenheim KG; BK Giulini GmbH).

Following a request from the European Commission, the Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) was asked to deliver a scientific opinion on the application for renewal of orthophosphoric acid as a technological additive (functional group: preservatives) for all animal species. The applicant has provided evidence that the additive currently on the market complies with the existing conditions of authorisation. There is no evidence that would lead the FEEDAP Panel to reconsider its previous conclusions. Thus, the Panel concluded that the additive remains safe for all animal species provided that the optimal Ca:P ratio is maintained. Additionally, the FEEDAP Panel concluded that orthophosphoric acid remains safe for the consumer and the environment under the authorised conditions of use. Regarding the user safety, orthophosphoric acid is corrosive to the skin and eyes and should be considered as hazardous to the respiratory tract. There is no need for assessing the efficacy of the additive in the context of the renewal of the authorisation.

Assessment of the application for renewal of the authorisation of a feed additive consisting of dicopper chloride trihydroxide for all animal species (Nutreco Nederland B.V.).

Following a request from the European Commission, EFSA was asked to deliver a scientific opinion on the assessment of the application for the renewal of the authorisation of dicopper chloride trihydroxide as a nutritional feed additive. The additive is currently authorised for use in all animal species (3b409). The applicant is requesting a modification in the current authorising specification: (i) replacing the alpha crystal form paratacamite with clinoatacamite; (ii) removing the ratio between crystal polymorphs from the authorising specification; (iii) changing the minimum for particles below 50 μm from 1% to 5%. The FEEDAP Panel considers that the proposed modifications do not introduce concern for the safety for the target species and that the additive remains safe for the target species and the consumers when used up to the maximum authorised levels. Regarding the safety for the environment, the use of the additive in feed for terrestrial animals and land-based aquaculture is considered safe under the proposed conditions of use. The data available do not allow the FEEDAP Panel to reach a conclusion on the safety of the additive for marine sediment when it is used in sea cages. The additive is not corrosive to skin, but is an eye and skin irritant. Due to the nickel presence, it is considered a skin and respiratory sensitiser. There is no need for assessing the efficacy of the additive in the context of the renewal of the authorisation.

Assessment of the feed additive consisting of niacinamide for all animal species for the renewal of its authorisation (Arxada Ltd).

Following a request from the European Commission, EFSA was asked to deliver a scientific opinion on the assessment of the application for renewal of niacinamide as a nutritional additive for use in all animal species. The applicant has provided evidence that the additive currently on the market complies with the existing conditions of authorisation. There is no new evidence that would lead the FEEDAP Panel to reconsider its previous conclusions. Thus, the Panel concludes that the additive remains safe for all animal species, consumers and the environment under the authorised conditions of use. Regarding user safety, the additive is not irritant to skin but irritant to eyes. It is not a dermal sensitiser. Exposure through inhalation is likely. There is no need for assessing the efficacy of the additive in the context of the renewal of the authorisation.

Section III - Microalgal biofuels: Renewable, sustainable, and commercial applications

Section III - Microalgal biofuels: Renewable, sustainable, and commercial applications

A Techno-Economic Comparison of a Stand-alone Hybrid System for a Household: A Case Study for the Royal Commission in Saudi Arabia

The trend is now to use renewable energy sources to improve energy efficiency in the building sector and preserve the environment. The use of sources as renewable off-grid applications for driven applications in home sector (micro-grids) is very interesting nowadays. The economic factor and the cost of establishing these grids is the main obstacle to these investments. One of the key solutions to reduce the cost and increase the reliability of these grids is how to optimally determine the ratings and combination of some renewable sources based on the location of the house. This paper presents an effective techno-economical design of a stand-alone hybrid system. The system contains a photovoltaic (PV), wind turbine, battery, and diesel generator. This design is performed through an extensive examination of the techno-economical design of a standalone system to provide the desired energy load for a typical household building for both Albaha and Buraydah cities in Saudi Arabia. These two cities have different geographical locations as Albaha is located at latitude 20.0217 degrees north while Buraydah is located at 26.3592 degrees north. These two cities were selected due to the difference in their geographical locations to study the effect of the weather on the building performance in terms of cost of energy, energy penetration, and load met. To enhance the performance of the proposed hybrid system, some constraints were selected, such as Net Present Cost (NPC), and Total Annual Cost (TAC). Results demonstrate that stand-alone hybrid renewable energy systems can be applied to improve energy efficiency and economics of the existing buildings. Integration of PV system, wind turbine, battery, and diesel generator in the best configuration can provide a minimum cost of energy of about $0.596/kWh and $0.603/kWh for Albaha and Buraydah cities, respectively.

Cu-based hollow nanotubes with enhanced surface roughness and Chloridion-Enriched environment for Seawater-Splitting

The search for promising methods of hydrogen production has led to the development of electrocatalytic overall seawater splitting. We have successfully prepared a highly efficient and durable electrocatalyst, Cu-based hollow nanotubes with rough surfaces coupled with chloridion-enriched environment on copper foam, through in-situ corrosive engineering and cation/anion exchange at room temperature. This innovative approach has resulted in an electrocatalyst with excellent electrochemical activity and stability in seawater electrolyte, which could potentially revolutionize the field of renewable energy. Remarkably, this electrocatalyst requires only a small voltage of 1.55 V to achieve a current density of 10 mA cm−2 in a tedious seawater electrolyte, with excellent stability at 200 mA cm−2 for 100 h. Our work provides a valuable avenue for increasing the active sites and corrosion resistance of synthesized nanomaterials, making them a viable option for renewable energy-related applications.

Co-Ru alloy nanoparticles decorated onto two-dimensional nitrogen doped carbon nanosheets towards hydrogen/oxygen evolution reaction and oxygen reduction reaction

Constructing highly-efficient electrocatalysts toward hydrogen evolution reaction (HER)/oxygen evolution reaction (OER)/oxygen reduction reaction (ORR) with excellent stability is quite important for the development of renewable energy-related applications. Herein, Co-Ru based compounds supported on nitrogen doped two-dimensional (2D) carbon nanosheets (NCN) are developed via one step pyrolysis procedure (Co-Ru/NCN) for HER/ORR and following low-temperature oxidation process (Co-Ru@RuOx/NCN) for OER. The specific 2D morphology guarantees abundant active sites exposure. Furthermore, the synergistic effects arising from the interaction between Co and Ru are crucial in enhancing the catalytic performance. Thus, the resulting Co-Ru/NCN shows remarkable electrocatalytic performance for HER (70 mV at 10 mA cm−2) in 1 M KOH and ORR (half-wave potential E1/2 = 0.81 V) in 0.1 M KOH. Especially, the Co-Ru@RuOx/NCN obtained by oxidation exhibits splendid OER performance in both acid (230 mV at 10 mA cm−2) and alkaline media (270 mV at 10 mA cm−2) coupled with excellent stability. Consequently, the fabricated two-electrode water-splitting device exhibits excellent performance in both acidic and alkaline environments. This research provides a promising avenue for the advancement of multifunctional nanomaterials.

Plasma-Activated Solutions Regulate Surface-Terminating Groups Enhancing Pseudocapacitive Ti3C2Tx Electrode Performance.

2D transition metal carbides and nitrides (MXenes) are actively pursued as pseudocapacitive materials for supercapacitors owing to their advantages in electronic conductivity and surface reactivity. Increasing the fraction of ─O terminal groups in Ti3C2Tx is a promising approach to improve the pseudocapacitive charge storage in H2SO4 electrolytes, but it suffers from a lack of effective functionalization methods and stability of the groups in practical operation. Here a low-temperature and environment-friendly approach via the interaction of nonequilibrium plasmas with Ti3C2Tx dispersion is demonstrated to generate abundant and stable surface-terminating O groups. The impact of the discharge environment (Ar, O2, and H2) on the structural characteristics and electrochemical performance of Ti3C2Tx nanosheets is studied. The Ti3C2Tx modified in Ar and H2 maintains their original morphology but a significantly lower F content. Consequently, an extraordinarily high content (78.5%) of surface-terminating O groups is revealed by the high-resolution X-ray photoelectron spectroscopy spectra for the Ti3C2Tx samples modified in H2 plasma-treated solutions. Additionally, the Ti3C2Tx treated using H2 plasmas exhibits the best capacitive performance of 418.3 F g-1 at 2mV s-1, which can maintain 95.88% capacity after 10000 cycles. These results contribute to the development of advanced nanostructured pseudocapacitive electrode materials for renewable energy storage applications.