Renewable Penetration Research Articles

Prospective life cycle assessment of an integrated biorefinery for production of lactic acid from dairy side streams

In Ireland, the world's first-of-a-kind integrated dairy biorefinery has been developed to address waste disposal challenges in the dairy industry by converting dairy side streams into high-value biochemicals, specifically lactic acid (LA). This study aims to assess the environmental impacts of this innovative technology at a commercial scale through a comprehensive life cycle assessment (LCA) study. Experimental data from a pilot-plant facility was scaled up to a production capacity of 20,000 tons of LA per year using SuperPro Designer®. This data was combined with information from upstream processes such as milk production, cheese production, and transport, using OpenLCA. The cradle-to-gate LCA revealed that milk production had the greatest overall impact across all categories. Enteric fermentation has the most significant impact on climate change, while fertilizer and concentrate feed production primarily contributed to non-renewable energy demand, ozone formation, human toxicity, water consumption and fossil depletion. Fertilizer application substantially influenced eutrophication, acidification and ecotoxicity indicators. However, scenario analysis showed that implementing strategies like substituting biorefinery byproducts with fossil-based products, increasing renewable energy penetration, and integrating dairy beef production could result in significant environmental savings across all impact categories. Moreover, the findings highlighted that the handling of co-products would determine the magnitude of the system's impact. This study concludes that combining process design analysis with accessible data at a higher Technology readiness level (TRL) 7 offers an opportunity to identify hotspots and recommend alternative strategies to improve the environmental sustainability of the whole system at the design stage. Additionally, this study provides valuable guidance for minimizing environmental impacts during the design phase, enabling informed investment decisions before construction. Ultimately, it plays a crucial role in establishing a circular bioeconomy within the dairy industry by effectively utilizing the side streams to produce sustainable biobased chemicals, specifically LA.

Updated sustainability status of cadmium telluride thin‐film photovoltaic systems and projections

AbstractThis paper provides a comprehensive assessment of the up‐to‐date life‐cycle sustainability status of cadmium‐telluride based photovoltaic (PV) systems. Current production modules (Series 6 and Series 7) are analyzed in terms of their energy performance and environmental footprint and compared with the older series 4 module production and current single‐crystalline Silicon (sc‐Si) module production. For fixed‐tilt systems with Series 6 modules operating under average US irradiation of 1800 kWh/m2/year, the global warming potential (GWP) is reduced from 16 g CO2eq/kWh in Series 4 systems to 10 CO2eq/kWh in Series 6 systems. For operation in US‐SW irradiation of 2300 kWh/m2/year, the GWP is reduced from 11 to 8 CO2eq/kWh and for 1‐axis tracking systems operating in Phoenix, Arizona, with point‐of array irradiation of 3051 kWh/m2/year the GWP is reduced to 6.5 CO2eq/kWh. Similar reductions have happened in all environmental indicators. Energy payback times (EPBT) of currently installed systems range from 0.6 years for fixed‐tilt ground‐mounted installations at average US irradiation at latitude tilt installations to 0.3 years for one‐axis trackers at high US‐SW irradiation, considering average fossil‐fuel dominated electricity grids with fuel to electricity conversion efficiency of 0.3. The resulting energy return on energy investment (EROI) also depends on the conversion efficiency of the electricity grid and on the operation life expectance. For a 30‐year operational life and grid conversion efficiency of 0.3, EROI ranges from 50 (at US average irradiation) to 70 for US‐SW irradiation. The EROI declines with increased grid conversion efficiency; for CdTe PV operating in south California with grid conversion efficiency of 49%, the EROI is about 50 and is projected to fall to 30 when the state's 2030 target of 80% renewable energy penetration materializes. Material alternatives that show a potential of further reductions in degradation rates and materials for enhanced encapsulation that would enable longer operation lives have also been investigated. A degradation rate of 0.3%/year, which has been verified by accelerated testing, is assumed in 30‐year scenarios; this is projected to be reduced to 0.2%/year in the near‐term and potentially to 0.1%/year in the longer term. With such low degradation rates and enhanced edge‐sealing, modules can last 40‐ to 50‐years. Consequently, all impact indicators will be proportionally reduced while EROI will increase. This detailed LCA was conducted according to ISO standards and IEA PVPS Task 12 guidelines. The study revealed that the choices of system models, methods and temporal system boundaries can significantly impact the results and points out to the need to include assumptions regarding these choices in the “transparency in reporting” requirements listed in the IEA PVPS Task 12 Guidelines.

Consumer Theory-Based Primary Frequency Regulation in Multi-Microgrid Systems within a P2P Energy Management Framework

This paper presents a novel primary frequency regulation strategy for multi-microgrid (MMG) systems, utilizing consumer theory within a peer-to-peer (P2P) energy management framework. By coordinating photovoltaic (PV) systems and energy storage systems (ESS), the proposed method ensures a rapid and effective response to frequency deviations. Unlike conventional approaches, this strategy minimizes the curtailment of renewable energy sources by prioritizing the use of ESS, allowing excess energy to charge the ESS for later use during under-frequency events. This not only enhances energy efficiency but also maximizes renewable energy utilization. Simulations demonstrate that the proposed scheme achieves lower frequency deviations and faster stabilization compared to traditional droop and virtual inertia methods. These results highlight the potential benefits of integrating consumer theory-based models into primary frequency regulation, significantly enhancing system stability and efficiency in power systems with high levels of renewable energy penetration.

Development of low-carbon technologies in China's integrated hydrogen supply and power system

Hydrogen and electricity are crucial and interdependent energy carriers in China's pursuit of carbon neutrality, suggesting the necessity of utilizing cost-effective low-carbon technologies that facilitate their integrated development. The cost-optimal, provincial level, deployment of low-carbon technologies under this long-term goal remains to be determined. This study employs the REPO model to identify the cost-optimal, low-carbon hydrogen production mixes and the evolution of the integrated power system of China from 2020 to 2050. The integrated planning and operation of hydrogen supply and power systems are explored at the provincial level. The role of high-temperature gas-cooled reactors in this integrated energy system is also analyzed. The results reveal that electrolytic hydrogen would dominate China's hydrogen supply after 2040, with alkaline, proton exchange membrane, and solid oxide electrolyzers produce over 1 Mt of hydrogen in the short term, by 2035, and in 2050. Leveraging the low-carbon heat production of high-temperature gas-cooled reactors in addition to its electricity generation to meet the thermal requirements of solid oxide electrolyzers could boost the output to 4.2 Mt in 2050 and reducing the total system CO2 emissions and costs by 2.28% and 0.05%, respectively. By 2050, the integration of hydrogen supply and power systems also generates up to 2194 TW h of flexible electricity demand by electrolyzers, which raised the renewable energy penetration by 4 percentage points while decreasing the need of flexible natural gas power generations and energy storages. This study is valuable for proposing the analytical framework and performing the provincial-level study of decarbonization of China's integrated hydrogen supply and power system.

Increasing variable renewables in coal-based energy systems under high electrification in the transport and heating sectors: The case of Kosovo

The increasing penetration of variable renewables poses major challenges in energy systems with limited flexibility. However, there are many solutions to support variable renewable integration when utilizing potential synergies among the different energy sectors. This research examines the technical and environmental effects of electrifying the transport and heating sectors in a coal-based energy system with limited flexibility, aiming to support the integration of variable renewable energy. Scenario analysis is employed to evaluate the use of heat pumps with thermal storage (power-to-heat) for individual heating solutions, electric vehicles, and Vehicle-to-Grid in the transport sector. These measures are evaluated as the primary means for enhancing the energy system flexibility to accommodate a larger share of variable renewables. Additionally, a dynamic analysis was conducted on thermal power plant operational capacities and efficiencies under varying electrification rates and renewable energy shares. The analysis is developed in the EnergyPLAN model using Kosovo energy system as a case study. The results confirm that the electrification of the heating and transport sectors positively impacts the integration of variable renewable energy by reducing critical excess electricity production and CO2 emissions, while power-to-heat and Vehicle-to-Grid facilitate synergies among different energy sectors. However, scenarios with high shares of variable renewable energy present challenges for the nominal operation of thermal power plants, potentially leading to lower operational efficiencies and slightly higher CO2 emissions compared to scenarios where thermal power plant part-load efficiency remains unchanged.

Long-Duration Energy Storage—A Literature Review on the Link between Variable Renewable Energy Penetration and Market Creation

The relationship between a region’s dependency on variable renewable energy (VRE) and the viability of long-duration energy storage (LDES) technologies is recognised through various electricity grid modelling efforts in the contemporary literature. Numerous studies state a specific VRE penetration level in total electricity generation as an indicator of the emergence of an LDES market. However, there is considerable variability across studies when comparing VRE penetration levels in conjunction with LDES technology utilisation, and significant diversity exists in electricity grid modelling approaches. This review aims to highlight these inconsistencies by offering an overview of disparate findings and dissecting the influencing variables. Sixteen parameters are identified from reviewed studies, complemented by an additional five recognised through in-depth analysis. This comprehensive examination not only sheds light on critical aspects overlooked in previous reviews, requiring further investigation, but also provides novel insights into the complexity of this correlation, elevating the understanding of LDES market creation by unravelling the factors that influence the technology adoption across various contexts. Furthermore, it provides clarity in LDES research terminology by rectifying ambiguous language in the existing literature. Altogether, seven databases were explored to produce a trustworthy foundation for the study.

The influence of grid connectivity, electricity pricing, policy-driven power incentives, and carbon emissions on renewable energy adoption: Exploring key factors

In the modern era, surging economic activities heighten energy demand, depleting traditional reserves and harming the environment. Renewable energy emerges as a vital alternative but faces technical, economic, and policy challenges. This study explores the impact of factors like energy grid, government incentives, CO2 emissions, economic growth, and electricity prices on renewable energy adoption in Pakistan from 1990Q1 to 2022Q4. Results reveal a U-shaped relationship between the energy grid and renewable energy penetration in the short and long terms. National support initially boosts green energy but diminishes over time. Economic incentives initially hinder adoption (i.e., 7.445, p < 0.000) but increase in the long run (i.e., −2.881, p < 0.000). Energy prices suppress adoption in the short term (i.e., −0.084, p < 0.050). Income correlates positively in the short term (i.e., 0.006, p < 0.000) but negatively in the long term (i.e., 0.019, p < 0.000). Policy-induced incentives and energy prices drive adoption, with impacts on income observed. Causal relationships and variance decomposition analysis highlight key factors influencing renewable energy integration in Pakistan, thereby informing policy and strategic decisions to foster sustainable energy practices.

Solar surge and cost shifts: Heterogenous effects of redistribution in the electricity bills in Japan

This study investigates the impact of daily intermittency in solar energy on retail electricity bills, focusing on the “Duck Curve” and “Peak Shifting” phenomena and their varying effects on different consumer groups. Notably, commercial and industrial users exhibit higher demand around midday, while residential users peak during morning and evening hours. This prompts a crucial question: do peak shifting and redistribution effects differ among consumer groups due to their distinct electricity consumption patterns? Our analysis centers on Japan's power system, which has witnessed significant solar energy penetration, with solar capacity growing from 42 GW in 2016 to 83 GW in 2022. Utilizing monthly electricity consumption data and employing robustness checks through instrumental variable methods, we empirically demonstrate that increased solar penetration leads to higher electricity prices for residential consumers but reduced costs for commercial-industrial users. Additionally, we uncover the mediating role of pumped hydro storage (PHS) stations in stabilizing prices during peak and off-peak periods by managing energy demand variability, thereby mitigating economic impacts across consumer groups. This study highlights the issue of cross-class subsidization, where certain groups bear disproportionately higher electricity costs due to increased renewable energy penetration. It underscores the necessity for carefully crafted policy interventions to uphold market fairness and sustainability alongside large-scale renewable penetration, ensuring a balanced and equitable energy transition.

A new model for comprehensively evaluating the economic and environmental effects of vehicle-to-grid(V2G) towards carbon neutrality

Vehicle-to-grid (V2G) technology enables electric vehicles (EVs) to serve as flexible load storage resources, which is expected to play a pivotal role in pursuing carbon neutrality. However, existing studies on the effect of V2G at different stages of carbon neutrality is not sufficient, and there is a lack of discussion on the optimal adoption period for V2G in the context of electricity marketization trading. To fill this gap, a new methodology is proposed in this study to analyze multi-dimension effects of V2G towards carbon neutrality. The model is a novel attempt of applying partial market equilibrium model to depict the interaction between electricity suppliers and V2G adopters. By applying in a China's case, the results demonstrate that: (1) EVs with V2G can substitute 22.2 %–30.1 % energy storage and accelerate the phase-out of coal-fired power. (2) V2G can effectively mitigate electricity price fluctuations, moreover, more fast charging infrastructure will strengthen such effect. (3) V2G only become attractive when renewable energy penetration rate reaches 80 %, otherwise, it cannot effectively reduce the total social cost and carbon emission. (4) In the carbon neutrality scenario with limited emission, the emission reduction effect of V2G is weakened, however, its economic benefit keeps increasing.

Optimizing virtual energy sharing in renewable energy communities of residential users for incentives maximization

Renewable energy communities (RECs) are considered a promising tool for putting the citizens at the center of the energy transition, while also promoting self-sufficiency coming from local resources and decarbonization through high penetration of renewables. A key challenge when operating RECs is represented by the number of decision variables to consider depending on the number and type of community participants and distributed technologies, while also considering the associated uncertainties. Moreover, the monetarization of energy shared in the community for benefitting residential users is crucial. The contribution of this paper is to present an innovative stochastic linear programming model for optimizing the energy sharing in RECs to maximize revenues associated with the incentives for the energy shared as established by the Italian regulation. The REC under study consists of a condominium with a PV plant installed on the rooftop, and air conditioning and battery storage systems installed in each apartment. The problem is to find the optimal control strategies for air conditioning systems and batteries with a 15-minute time-step, which maximize the expected revenue from energy sharing while meeting the users’ comfort requirements and preventing users’ bills from increasing. Numerical results demonstrate the effectiveness of the optimization model to maximize the energy shared and the related revenues through the optimal control of installed assets. The combined optimized strategies of both air conditioning and batteries allow for finding the best performance of the REC in terms of maximization of the energy shared. In this latter case, the expected total revenue for users for the energy sharing increases by 59.7 %, 38.7 % and 12.6 % as compared to the baseline case with no optimal control, the case with control of air conditioning only, and the case with control of batteries only, respectively.

Comprehensive Framework for Distribution Network Multi-Investment Expansion Planning: Emissions, Uncertainty, and Resource Remuneration Integration

Changes are currently unfolding within electric distribution networks as renewable energy integration grows. This paper introduces a novel stochastic approach for expansion planning in distribution networks with high renewable energy penetration. The model addresses uncertainties, daily and seasonal impacts, distributed generation remuneration, carbon emissions, and optimal energy storage deployment. Risk aversion techniques such as value-at-risk and conditional value-at-risk are employed to prepare networks for impactful events. Emphasizing multi-period investment over single-period, the analysis considers confidence levels and risk aversion’s effects on reliability indexes, energy storage placement, generation patterns, network topology, and costs. Using a realistic 180-bus distribution network in Portugal spanning 30 years, the method’s applicability and robustness are demonstrated. Results illustrate the benefits of multi-period investment, with cost increases of 6.09 % and 2.97 % for single- and multi-period investments at a 90 % confidence level, respectively, when both are compared to a situation with no risk aversion. Higher confidence levels amplify the trade-off between extreme scenario cost reduction and total cost increase, with a 99 % confidence level reducing scenario costs by 19.01 % while increasing total costs by 5.64 %.

Development &amp; Validation of a Packed Bed Thermal Energy Storage Model

The rapid growth of economies and population around the world have exponentially increased the demand for energy. This demand has invoked increased annual global CO2 emissions and necessitated a transition to clean energy technologies. Reliable and affordable energy storage technologies are paramount for increasing renewable energy penetration onto the grid, supporting periods with reduced or no renewable energy generation. This project is aimed at developing a Thermal Energy Storage (TES) solution that can deliver heat to a heat engine for power production or to an industrial process for prolonged periods. TES long duration energy storage (LDES) presents many potential benefits, including 1) Low Cost 2) scalability 3) high energy density 4) low carbon footprint and 5) resiliency via ability to produce synchronous power (i.e., spinning turbomachinery). The broader objective of this project is to build, test, and model the TES concept at a 2 MWh scale to determine the economic and physics-based practicality of the system. The work presented here describes the first phase objectives of the project, including benchtop scale testing, model development, and Model Validation.

Design and Economic Analysis of a Grid-Tied Microgrid Using Homer Software

The demand for electrical energy is increasing due to reasons such as economic growth, industrialization and electrification. The world responds to a large part of this electricity demand with fossil fuel-based production. However, the constraints on the sustainability of fossil resources and the negative effects of fossil-based production on nature have made renewable energy one of the most talked about concepts in the energy sector in recent years. After Russian – Ukrainian conflict, the effects of political crises between countries were seen in the field of energy, and many countries faced the risk of energy supply and high pricing policies. With its easy integration of renewable energy and its structure that reduces dependency in energy, Microgrids (MGs) are important for the energy systems of the future. However, the environmental dependence of renewable energy prevents it from being used as an absolute energy source in systems. In this study, a microgrid design for the city of Duquesne, USA whose main sources of electricity generation are solar and wind, has been realized and electrical and economic analyzes have been made over different scenarios as grid-tied, limited grid activation and standalone. Scenarios are evaluated on Net Present Value (NPV), Levelized Cost of Energy (LCOE), installation cost and renewable penetration. The grid-tied scenario, which reduces the LCOE by around 33% compared to the existing grid has been determined as the most economic option.

Multi-objective optimal sizing and design of renewable and diesel-based autonomous microgrids with hydrogen storage considering economic, environmental, and social uncertainties

The multifaceted nature of human society necessitates the consideration of various indicators when planning and designing energy systems. The success of energy systems is contingent on their ability to reliably meet demands while satisfying different objectives that align with societal needs. This paper presents the multi-objective optimal design and configuration of hydrogen-storage-based microgrids to reliably meet electric load demands in remote regions while considering economic, environmental and social uncertainties. A comprehensive Mixed Integer Linear Programming (MILP) was adopted to model the microgrid consisting of renewable energy systems (RES), hydrogen energy storage system (HESS), battery energy storage system (BESS), and diesel generator (DG). Advanced Interactive Multidimensional Modelling System (AIMMS) was used to perform the deterministic and robust optimisation with special consideration on cost-greenhouse emissions minisation and employment generation maximisation. This study further performs a comparative analysis between hydrogen-based microgrids and lithium-ion battery-based microgrids in terms of the key objectives. In overall performance, the configuration consisting of photovoltaic (PV), wind turbine (WT), fuel cell (FC), electrolyser (EL) and low-pressure tank (LPT) outplays the other configurations considered in terms of total job factor, levelised cost of electricity, renewable energy penetration factor, carbon emission reduction capability. Considering both deterministic and robust solutions of the configuration, the levelised cost of electricity ranges between 0.131 and 0.169 $/kWh, the total lifetime cost varies from $2,002,100 to $6,784,740, and the job provision factor ranges between 0.339 and 0.447. Nevertheless, there is a need for further reduction of the investment cost for its continued technological and market penetration. This is a good basis for the adoption of hydrogen-based storage systems with renewable energy systems.

Frequency Regulation Strategy in Islanded Microgrid With High Renewable Penetration Supported by Virtual Inertia

Frequency Regulation Strategy in Islanded Microgrid With High Renewable Penetration Supported by Virtual Inertia

Optimization method for capacity of BESS considering charge‐discharge cycle and renewable energy penetration rate

AbstractIn order to achieve the “carbon peaking and carbon neutrality” goals, we must vigorously develop renewable energy power generation. As the penetration of renewables progressively escalates, the corresponding demand for battery energy storage systems (BESS) within the power grid rises concomitantly. This paper presents an innovative optimization approach for configuring BESS, taking into account the incremental variations in renewable energy penetration levels and BESS charge‐discharge cycles. Employing incremental analytical techniques and pivotal metrics such as capacity elasticity, the proposed method determines the optimal penetration rate and corresponding BESS capacity outcomes for deploying energy storage systems. An example analysis of a rural power distribution benchmark is carried out by using the method in this paper, which proves the effectiveness of the method in this paper. This methodology was substantiated through its application to a case study of a rural power distribution benchmark, thereby validating its efficacy. Furthermore, it was compared with the particle swarm optimization, providing a comparative assessment of their relative performance.

A two-stage distributed stochastic planning method for source-grid-load-storage flexibility resources considering flexible ramp capacity

With rapidly increasing levels of renewable energy penetration, flexibility resources play an ever more critical role in the future power system. This paper describes a two-stage stochastic mixed integer second order cone (MISOC) method for flexibility resource planning (VFRP) considering source-grid-load-storage interactions. Considering renewable energy penetration levels and flexibility resource characteristics, this study quantifies the extent to which the share of renewable energy generation affects cost performance, and assesses the priority and potential of investing in flexibility resources. Moreover, the multi-type flexibility resource portfolio allocation method and energy storage only approach are compared in terms of socio-economic benefits. A multi-cut Benders-based approach is used for decomposing large-scale stochastic expansion planning problems to reduce the computational burden. Numerical simulation tests on the modified energy test systems I39G20 and F213G20 verified the correctness and effectiveness of the proposed flexible resource planning models and solution algorithms. The simulation results show that retrofit of coal-fired units for better flexibility has a higher investment return. Still, energy storage presents a tremendous investment prospect and potential. Finally, the multi-type flexibility resource portfolio allocation method is more cost-effective than an energy storage only approach.

A new approach to wind farm stabilization and peak electricity support using fuel cells: Case study in Swedish cities

The present article introduces and investigates a new approach for shaving the peak electricity demand and mitigating energy instability. At the heart of this concept is a smart integration for efficient hydrogen production/storage/usage to minimize energy costs and maximize the renewable penetration in the local electricity grid. The system is driven by a wind farm integrated with proton exchange membrane (PEM) electrolyzers and reverse osmosis desalination units for efficient electricity, hydrogen, and freshwater production. It also combines with PEM fuel cells equipped with a hydrogen tank to meet the demand constantly when renewable electricity is unavailable or unstable. The system's practicality is assessed and compared for various Swedish cities with high wind potential from thermodynamic, economic, and environmental aspects to see where it works effectively. The comparative results of various scenarios show that integrating 32 wind turbines, 2 electrolyzers, and 2 reverse osmosis units, with 25% of electricity going to electrolyzers, 20% to reverse osmosis, and 55% to the grid, is the most optimal configuration/allocation. Optimal locations for the power plant are identified in Visby, Halmstad, and Lund due to favorable wind conditions. Setting up the system in Visby could prevent 1878.2 tonnes of CO2 emissions, generate 93,910 MWh of electricity annually, and create 213 ha of green space. The proposed system in Visby could boast the biggest electricity generation capacity, reaching 11,263 MWh, sufficient to power 938 households. Scaling this model to 12 cities in Sweden could provide the electricity needs of 4500 households, demonstrating the potential for widespread impact.

A novel artificial electric field strategy for economic load dispatch problem with renewable penetration

A novel artificial electric field strategy for economic load dispatch problem with renewable penetration

Load frequency control in power systems with high renewable energy penetration: A strategy employing P[formula omitted](1+PDF) controller, hybrid energy storage, and IPFC-FACTS

The high penetration of Renewable Energy Sources (RESs) in the modern power system poses a challenge to power system stability. This stability is affected by the stochastic, fluctuating output of RESs, which is influenced by weather conditions, and a lack of inertia resulting from reduced rotating mass. To address this issue, a new controller, referred to as Proportional-Fractional Integrator Plus Proportional-Derivative with Filter, PIλ(1+PDF), is designed for Load Frequency Control (LFC) with the support of a Hybrid Energy Storage System (HESS) for power systems with high-RES penetration. The HESS comprises a Superconducting Magnetic Energy Storage System (SMES) and a Vanadium Redox Flow Battery (VRFB) coupled with an Interline Power Flow Controller Flexible AC Transmission Systems (IPFC-FACTs) controller. The HESS, working in conjunction with the proposed LFC, injects virtual inertia and maintains power flow to expedite the frequency stability process. These systems are also integrated with Alternating Current (AC) and High Voltage Direct Current (HVDC) transmission lines to collectively enhance both the system's stability and the capacity of its transmission lines. To optimize the PIλ(1+PDF) controller parameters, Zebra Optimization Algorithm (ZOA) is employed utilizing an Integral Time Absolute Error (ITAE) objective function. The proposed controller is tested on a four-area power system integrated with a wind turbine, photovoltaic (PV) panels, a biodiesel generator, and a hydrogen aqua electrolyzer fuel cell, representing a high penetration of RESs in modern power systems. The results are compared with those obtained using Proportional-Integral-Derivative (PID) and Fractional Order Proportional Integral Derivative (FOPID) controllers. Sensitivity analysis and robustness tests are also performed to verify the stability of the power network by changing system parameters and under randomly chosen loading conditions. The proposed PIλ(1+PDF) controller tuned with ZOA outperforms PID and FOPID controllers by minimizing settling time for frequency changes by 62 %, eliminating overshoot, and reducing undershoots for frequency and tie-line power changes by 73 % and 55 %, respectively. Simulation results demonstrate that the proposed controller outperforms PID and FOPID controllers by effectively damping frequency and tie-line deviations, resulting in reduced frequency overshoots, undershoots, and shorter settling times.