Removal Of Methylparaben Research Articles

Parabens in aerobic granular sludge systems: Impacts on granulation and insights into removal mechanisms

This work assessed the impact of methylparaben, ethylparaben, propylparaben, and butylparaben (200 μg L−1 each) on the granulation process as well as on the organic matter and nutrient removal of an aerobic granular sludge (AGS) system (6-h cycle). Additionally, some insights into the main paraben removal mechanisms were provided. In the presence of parabens, aerobic granules with good settleability, but with fragile and irregular structure, were grown. No significant effect of parabens on organic matter (>90%) and nitrogen (~70%) removal was evidenced. On the other hand, phosphorus removal was slightly impaired, although high removal efficiencies (~70%) were reached. High paraben removal efficiencies were achieved (>85%) in the AGS system, with methylparaben being the most recalcitrant compound. Concerning the removal mechanisms, biotransformation was the main mechanism in the removal of all parabens (85.5% for methylparaben and 100% for the others), whereas, apparently, adsorption played a role only in the removal of methylparaben. In addition, this compound was also suggested as a probable intermediate of the degradation of the larger alkyl-chain parabens. Lastly, regarding the microbial community, with the exception of Mycobacterium, the reactors shared the same genera, which may explain their comparable operational performances. Additionally, some genera that developed more in the presence of parabens may be related to their degradation. Therefore, although antimicrobial agents such as parabens compromised the granule structure, AGS system maintained a good operational performance and showed to be very efficient in paraben removal.

In-situ route for the graphitized carbon/TiO2 composite photocatalysts with enhanced removal efficiency to emerging phenolic pollutants

AbstractTiO2 is the most photoactive material because of its superstrong photooxidizing ability, and TiO2 photocatalysis has been widely applied in sustainable water treatment and environmental remediation. However, poor sunlight or visible-light harvesting efficiency and fast recombination rate of the photogenerated charge carriers severely limit the practical applications of TiO2. To overcome these problems, the present work demonstrates a facile in-situ co-condensation method combined with hydrothermal treatment to prepare a series of graphitized carbon/TiO2 composite photocatalysts, and anatase TiO2 phase and π-π-conjugated polycyclic aromatic carbon structure are created simultaneously. As-prepared TiO2/C composites exhibit remarkably high visible-light photocatalytic activity in the degradation of aqueous emerging phenolic pollutants, acetaminophen (APAP) and methylparaben (MPB), and apparent rate constant of the TiO2/C composite with carbon doping level of 10.3% for APAP and MPB removal is 7.6 and 2.8 times higher than that of bare TiO2, and 6.2 and 2.6 times higher than that of Degussa P25 TiO2. Based on the results of photoelectrochemical experiments, indirect chemical probe measurements, and ESR spectroscopy, it is verified that doping TiO2 with graphitized carbon is responsible for this enhanced photocatalytic activity, which renders the improved visible-light harvesting ability, the accelerated separation of the photogenerated charge carriers, and enlarged BET surface areas. Through analyzing the intermediates yielded in the photodegradation process, the pathway of visible-light photocatalytic degradation of APAP and MPB over the TiO2/C composite is proposed.

Electro-oxidation of methyl paraben on DSA®-Cl2: UV irradiation, mechanistic aspects and energy consumption

The electro-oxidation of methylparaben (MeP) was studied using a DSA®-Cl2 in simple electrolysis and hybrid process (electrolysis followed by UV light irradiation), aiming at evaluating the oxidation mechanism, the removal of organic matter and the energy consumption. Analysis of the results revealed that MeP removal is rapid in both processes. However, the formation of a solid byproduct of a polymeric nature, which is probably related to MeP oxidation products, has occurred. Irradiation of UV light in the solution improved the mineralization process by facilitating the degradation of byproducts, including the solid one. Using the hybrid process, mineralization increased by 40% with low additional energy costs. In addition, new aspects about the MeP electrooxidation mechanism were found. The use of the DSA®-Cl2 appears to favor oxidative coupling reactions, resulting in higher molecular weight products prior to aromatic ring breakdown and further mineralization.

Evaluation of methylparaben removal and microbial behavior using a SBR system

We evaluated the variation in microbial populations and the behavior of an SBR system in the removal of methylparaben (MePB). The experimentation was carried out for 14 weeks, in three operational stages as follows: stabilization (Stage I), (Stage II = 300 μgMePB/L and Stage III = 600 μgMePB/L). The variation of the microorganisms was analyzed over the experimentation time along with the contact with the pollutant to be degraded, and the removal percentage of COD and MePB, with results of 88±5,5% and 92±7,7% respectively. Kinetic of MePB removal was evaluated to obtain the rate constant of biological degradation, Kbiol. Using these kinetic results, the effect of different concentrations of MePB and biomass on biodegradation behavior was evaluated. Kbiol (LgSS-1d-1) values were obtained of 42.8 and 79 respectively; and 472±38.0 µgMePB/L, at biomass contents of 1466.7 and 2666.7 mgSSV/L, where Kbiol (LgSS-1d-1) values were obtained of 11.0 and 32.6 respectively.The variation of the microbial populations were analyzed using DGGE. The results obtained indicated that the populations presented similar characteristics between the stages. However, for the biomass samples of Stage I and stage III, significant differences were identified in the composition of microbial populations. Nonetheless, this did not affect the removal of MePB and the diversity conditions that characterize an aerobic system.

Evaluation of adsorption and removal of methylparaben from aqueous solutions using amino-functionalized magnetic nanoparticles as an efficient adsorbent: Optimization and modeling by response surface methodology (RSM)

Evaluation of adsorption and removal of methylparaben from aqueous solutions using amino-functionalized magnetic nanoparticles as an efficient adsorbent: Optimization and modeling by response surface methodology (RSM)

Removal of methylparaben from synthetic aqueous solutions using polyacrylonitrile beads: kinetic and equilibrium studies.

The removal of methylparaben (MP), a well-known endocrine disruptor, from aqueous solutions using polyacrylonitrile (PAN) beads has been studied under batch conditions, at room temperature and at different initial MP concentrations. The kinetic and equilibrium results have been analyzed. Kinetic modeling analysis has been carried out with three different types of adsorption models: pseudo-first-order, pseudo-second-order, and Elovich model. Kinetic data analysis indicated that the adsorption was a second-order process. The MP adsorption by PAN was also quantitatively evaluated by using the equilibrium adsorption isotherm models of Langmuir, Freundlich, Dubinin-Radushkevich (D-R), and Temkin and the applicability of the respective isotherm equations has been compared through the correlation coefficients. Adsorption data resulted well fitted by the Freundlich isotherm model. Data of MP adsorption have also been used to test different adsorption diffusion models. The diffusion rate equations inside particulate of Dumwald-Wagner and the intraparticle diffusion model have been used to calculate the diffusion rate. The actual rate-controlling step involved in the MB adsorption process was determined. The kinetic expression by Boyd gave the right indications. All together, our results indicate that PAN beads are a useful tool to remediate water bodies polluted by endocrine disruptors.

Methylparaben removal using heterogeneous photocatalysis: effect of operational parameters and mineralization/biodegradability studies.

Methylparaben (MePB) is an organic compound employed mainly in the manufacture of different personal care products. However, it has been recently listed as a potential endocrine disrupter chemical. Therefore, the main objective of this work was to evaluate the degradation of MePB in aqueous solutions using heterogeneous photocatalysis with TiO2 and hydrogen peroxide. In this way, effects of pH and the initial concentrations of catalyst, H2O2, and pollutant on treatment were analyzed. A face centered, central composite design was used for determination of the influence of each parameter in the process and the conditions under which the pollutant suffers the highest rates of degradation were selected. In general, results indicate that combination TiO2/H2O2/light irradiation leads to ∼90% of substrate removal after 30min of reaction and that hydroxyl free radicals are the main specie responsible for organic matter elimination. Finally, in terms of mineralization and biodegradability, experimental results indicated that part of the organic matter was transformed into CO2 and water and the photo-treatment promoted an increase in samples biodegradability.

Degradation of methylparaben in water by corona plasma coupled with ozonation

The degradation of methylparaben (MeP) in water was investigated using a pulsed corona discharge generated in oxygen, above the liquid. A comparison was made between results obtained in semi-batch corona (SBC) configuration (stationary solution, continuous gas flow) and results obtained in a semi-batch corona with recirculation combined with ozonation (SBCR + O3), where the liquid is continuously circulated between a solution reservoir and the plasma reactor and the effluent gas containing ozone is bubbled through the solution in the reservoir. It was found that MeP was completely degraded after 10-15 min of treatment in both configurations. Oxidation by ozone alone, in the absence of plasma, was a slower process. The energy efficiency for MeP removal (Y MeP) and for mineralization (Y TOC) was significantly higher in the SBCR + O3 configuration (Y MeP = 7.1 g/kWh at 90 % MeP removal and Y TOC = 0.41 g/kWh at 50 % total organic carbon (TOC) removal) than in the SBC configuration (Y MeP = 0.6 g/kWh at 90 % MeP removal and Y TOC = 0.11 g/kWh at 50 % TOC removal).

Artificial Substrates for Oviposition and Larval Development of the Pepper Weevil (Coleoptera: Curculionidae)

The pepper weevil, Anthonomus eugenii Cano (Coleoptera: Curculionidae), is a major pest of cultivated peppers (Capsicum spp.) and other cultivated and wild species within the family Solanaceae. Laboratory study of this insect, as well as its biological control agents, will be greatly facilitated by an artificial rearing system that does not rely on pepper fruit. An egg collection method and amendments to a standard larval diet were investigated for use in the rearing of this weevil. Spherical sachets made of Parafilm or netting enclosing leaves of pepper, American black nightshade, eggplant, tomato, potato, and jasmine tobacco induced oviposition. Tomato, potato, and jasmine tobacco leaves were accepted despite the fact that these are not oviposition hosts for pepper weevils in the wild. A standard larval diet formula was modified in an attempt to improve egg hatch, larval survival, developmental time, and adult mass. The diet formula was modified with the addition of freeze-dried jalapeño pepper powder, an additional lipid source, alternate protein sources, and the removal of methyl paraben. None of the aforementioned treatments resulted in a significant improvement over the standard diet. Egg hatch was greater when eggs were incubated on moist paper towels rather than in diet; thus, placement of neonates rather than eggs into diet improved production of adults. Suggestions for more efficient rearing of weevils on the currently available diet and future directions for the development of an artificial rearing system for pepper weevil are discussed.