Indigo Carmine Removal Research Articles

Batch and bulk removal of hazardous dye, indigo carmine from wastewater through adsorption

An inexpensive adsorption method has been developed for the removal of indigo carmine, a highly toxic indigoid class of dye from wastewater. Waste materials—bottom ash, a power plant waste and de-oiled soya, an agricultural waste have been used as adsorbents. Attempts have been made through batch and bulk removal of the dye and both the adsorbents have been found to exhibit good efficiency to adsorb indigo carmine. Under batch technique effect of temperature, pH, concentration, dosage of adsorbents, sieve size of adsorbents, etc. have been observed. The dye uptake on to both the adsorbents is found to validate Langmuir and Freundlich adsorption isotherms models. Different thermodynamic parameters, like Gibb's free energy, enthalpy and entropy of the on-going adsorption process have also been evaluated. Batch technique has also been employed for the kinetic measurements and the adsorption follows a first order rate kinetics for both the adsorbents. The kinetic investigations also reveal for both the adsorbents film diffusion and particle diffusion mechanisms are operative in the lower and higher concentration ranges, respectively. Under the bulk removal, indigo carmine has been adsorbed through the column beds of bottom ash and de-oiled soya and more than 90% of the dye material has been recovered by eluting dilute NaOH solution through exhausted columns.

New sorbent hydrogels for removal of acidic dyes and metal ions from aqueous solutions

Poly(N-hydroxymethylacrylamide), PHMA, hydrogels were prepared by using N-hydroxymethylacrylamide, HMA, monomer and polyethyleneglycol(400)diacrylate as a crosslinking agent in aqueous medium and then amine groups were incorporated onto PHMA hydrogels by amination reaction with different diamines. The obtained hydrogels were characterized by determination of amine value, hydroxymethyl group content and FTIR spectra. The amine value of hydrogels changed from 2.23 to 4.64 mmol/g by depending on the amine compounds used in amination reaction. Their swelling degree increased at acidic pH values and they showed pH dependent swelling behaviour. They were used as sorbent for removal of indigo carmine and Cu(II) ion, as a model dye molecule and metal ion, respectively, from aqueous solutions. The adsorption properties of the hydrogels were investigated by depending on pH, time and initial indigo carmine or Cu(II) ion concentration. It was seen that the amine group incorporated hydrogels have quite high adsorption rate and adsorption capacity, and their adsorption capacities changed with pH of the solution. Langmuir isotherm model was the best fit for adsorption of both indigo carmine and Cu (II) ion.

Aminofunctionalized acrylamide–maleic acid hydrogels: Adsorption of indigo carmine

Aminofunctionalized acrylamide–maleic acid hydrogels having both amine and acid groups were prepared by transamidation reaction of acrylamide–maleic acid (AAM–MA) hydrogels using ethylenediamine in non-aqueous media. Modified polymers were characterized by determination of amine value (AV), carboxylic acid group content (AGC) and FTIR spectra. The modified hydrogels obtained have the amine value of 2.81 mmol/g. Their swelling properties were changed depending upon the pH value of external medium. The modified hydrogels were used as a new sorbent for removal of indigo carmine from aqueous solution. The effects of pH, time, NaCl concentration and initial dye concentration on the adsorption capacity were investigated. Almost 70–80% of capacity was saturated within approximately 30 min and quite high adsorption capacity was observed. The adsorption capacity increased at acidic pH and also in presence of NaCl in dye solution. The adsorption isotherm models were applied to the experimental data and it was seen that the Langmuir isotherm model was the best fit for these modified AAM–MA hydrogels–indigo carmine system.

Studies on the mechanism of Indigo Carmine removal by solvent sublation

Indigo Carmine (C 16H 8N 2Na 2O 8S 2), an anionic dye, was removed from aqueous solution by solvent sublation of Indigo Carmine–cetyltrimethylammonium bromide (CTAB) complex (sublate) into 2-octanol. A stoichiometric amount of surfactant (surfactant:dye = 2:1) was demonstrated to be able to remove over 93% IC from the aqueous solution in 5 min. The apparent activation energy of attachment of the sublate to bubbles was calculated as 1.3 kJ/mol. Parameters were considered. At the same time, on the base of the complete transport mechanism, a mathematical model for the dye–surfactant complexation was obtained. Furthermore, the simulation of the mathematical and experimental data was made with good results.

Indigo carmine removal by charcoal from rice bran as an agricultural by-product

On the utilization of agricultural by-product, charcoal from rice bran was produced. The adsorption characteristics of indigo carmine onto charcoals from rice bran were investigated by the batch method. The yield and surface area of charcoal were decreased and increased with increase of carbonization temperature, respectively. The removal ratio of indigo carmine was high with the charcoal carbonized at higher temperature. In the relationship between the amount of indigo carmine adsorbed and the square root of elapsed time, a good linearity was recognized. The kinetic constant of adsorption removal for indigo carmine was rapid in the charcoal carbonized at higher temperature. The adsorption characteristics for indigo carmine removal by charcoal from rice bran were dominated by the value of their surface area.

Pulse dye densitometry using indigo carmine is useful for cardiac output measurement, but not for circulating blood volume measurement.

We evaluated the validity of a newly developed pulse dye densitometer for indigo carmine for measuring cardiac output and circulating blood volume. Measurements of cardiac output and circulating blood volume were performed with the indigo carmine densitometer during normovolaemia, hypovolaemia and hypervolaemia in nine mongrel dogs under general anaesthesia. The validity was evaluated by comparison of the values of cardiac output and circulating blood volume obtained by the thermodilution technique and the 51Cr-labelled red blood cell method, respectively. We also examined indigo carmine removal by continuous veno-venous haemofiltration after indigo carmine injection. There was good agreement between dye densitometer- and thermodilution-derived cardiac output (r = 0.885, P < 0.001). The bias and limits of agreement of these values were 0.09 and+/-1.07 L min(-1) (2 SD, n 22), respectively. The dye-densitometer-derived circulating blood volume was greater than that of the 51Cr-labelled red blood cell method, and both values showed weak agreement (r = 0.587, P < 0.027). The sieving coefficient of indigo carmine through continuous veno-venous haemofiltration was 0.34+/-0.06. These data indicate that indigo carmine densitometry is a reliable method for cardiac output determination, but it overestimates circulating blood volume, probably due to the transition of indigo carmine into the extravascular space in the systemic circulation.

Decolorization of Indigo Carmine by Charcoal from Extracted Residue of Coffee Beans

The adsorption ability of charcoal from extracted residue of coffee beans for indigo carmine removal was investigated by the batch method. Differences in the removal ratio and removal rate of indigo carmine could be explained by differences in the properties of charcoal. In the relationship between the amount of indigo carmine adsorbed and the square root of elapsed time, a good linearity was recognized. Since the relationship between the amount of indigo carmine adsorbed and square root of elapsed time showed a good linearity, the intraparticle diffusion of indigo carmine onto pores of adsorbents was identified as the rate-limiting step in the adsorption process.