Removal Of Different Types Research Articles

PH dependence of reactive oxygen species generation and pollutant degradation in Fe(II)/O2/tripolyphosphate system

It has been reported that tripolyphosphate (TPP) can effectively enhance the activation of O2 by Fe(II) to remove organic pollutants in the environment. However, the influence of solution pH on the generation and conversion of reactive oxygen species (ROS) and their degradation of pollutants in the Fe(II)/O2/TPP system needs further investigation. In this study, we demonstrated that O2•– and •OH were the main ROS responsible for degradation in the system at different pH conditions, and their formation rates were calculated using a steady-state model. Experiments combined with density functional theory (DFT) calculations showed that the p-nitrophenol (PNP) degradation pathway in the Fe(II)/O2/TPP system is regulated by solution pH. Specifically, at pH = 3, the existence of Fe(II) in the solution is dominated by [Fe(II)(HTPP)2]2−, which leads to a rapid conversion from O2 and HO2• to generate •OH, and PNP is primarily oxidatively degraded. However, at pH = 5/7, [Fe(II)(TPP)2]4− is taking the lead with which O2•– is accumulated in the solution due to the slow conversion to •OH in this condition, and the PNP is mainly reductively degraded. This study proposes a new strategy to achieve the targeted oxidative/reductive removal of different types of pollutants by simply varying the solution pH in the Fe(II)/O2/TPP system.

The use of bimetallic metal-organic frameworks as restoration materials for pollutants removal from water environment.

Bimetallic metal-organic frameworks (BMOFs) are a class of functional porous materials constructed by coordination between nodes containing two different metal ions and organic ligands. Studies have shown that the catalytic activity of BMOFs is greatly improved owing to the adjustment of charge distribution and the increase of active sites as well as the synergistic effect between the bimetals, and the advantages of their large specific surface area, high porosity, unique structure and dispersed active centres make them available as important organic materials applied in the field of wastewater treatment. In this review, the preparation and construction methods for BMOFs in recent years are summarized, and we focus on their removal of different types of pollutants in the aqueous environment, including ions, dyes, pharmaceuticals or personal care products, phenolic compounds and microorganisms, as well as their corresponding removal mechanisms. In addition, we provide an outlook on their future opportunities and challenges in wastewater treatment.

Assessing the Efficiency of Microalgae in the Removal of Salicylic Acid from Contaminated Water: Insights from Zebrafish Embryo Toxicity Tests

Microalgae-based water treatments for the removal of different types of pollution have been gaining considerable attention during the last few decades. However, information about microalgae potential in the removal of pharmaceuticals and personal care products (PPCPs) and the ecotoxicological outcomes is still limited. Therefore, in this work, we aimed at investigating salicylic acid removal from water by three different microalgae strains, namely Chlorella sorokiniana, Chlorella vulgaris and Scenedesmus obliquus. For such a purpose, photobioreactors were operated under batch and semi-continuous mode. Apart from determining the reduction in the concentration of salicylic acid attained by each strain, we used zebrafish embryo bioassays to assess the efficiency of microalgae to reduce its toxicity effects. S. obliquus was the strain that achieved the most significant decrease in the concentration and toxic effects of salicylic acid. Indeed, S. obliquus was able to rescue mortality and reduce abnormalities at practically 100%. The efficiency of C. sorokiniana and, especially, that of C. vulgaris were not so remarkable, indicating that the removal of SA and its toxic effects from water by microalgae is markedly strain dependent. The obtained results proved the importance of considering toxic effects for a more comprehensive evaluation of microalgae efficiency in the removal of PPCPs in view of an adequate selection for water treatment.

Removal of antibiotic resistant bacteria by the coupled system of ferrous ion activated peroxymonosulfate (PMS) and sodium percarbonate (SPC): Performance and mechanisms

Antibiotic resistance has turned into a focus of universal public health concern. Wastewater treatment plants are considered as reservoirs of antibiotic resistant bacteria (ARB) and antibiotic resistant genes (ARGs), which can be transmitted to the environment. In this research, an effective method for inactivating Escherichia coli DH5α (E. coli DH5α) carrying resistance genes was developed utilizing dual oxidant system of peroxymonosulfate (PMS) and sodium percarbonate (SPC) in the presence of ferrous ions (Fe(II)). The results indicated that E. coli DH5α could be inactivated 6.36 log under the conditions of 0.50 mM PMS, 0.50 mM SPC and 0.50 mM Fe(II) after 30 min. Besides, the removal of different types of ARB and pollutants could also be achieved by Fe(II)/PMS/SPC system. The quenching experiments and EPR analysis demonstrated that reactive species (•OH, SO4•−, O2•−, 1O2 and CO3•−) involved in the inactivation of E. coli DH5α. Bacterial damage mechanisms were systematically studied in terms of cell structure and morphology, enzyme activity, malondialdehyde and intracellular reactive oxygen species levels. The inactivation of E. coli DH5α in complex water matrix (including coexisting of anions and natural organic matter) and real wastewater was inhibited. The abundance of intracellular ARGs decreased by 1.15 log, whereas extracellular ARGs increased by 0.32 log. This research supplied a prospective approach for inhibiting the dissemination of antibiotic resistance.

Occurrence and Removal Efficiencies of Four Antibiotics in Kisii and Kabarnet Waste Water Treatment Plants, Kenya

Background: Antibiotics are presently considered as emerging contaminants with adverse effects in the environment and the population such as the development of antimicrobial resistant genes (ARG) and antimicrobial resistant bacteria (ARB). This study was guided by objective entailing to determine the seasonal occurrences and removal efficiencies of four antibiotics in Kisii and Kabarnet waste water treatment plants in Kenya. 
 Place and Duration of Study: Waste water samples were picked from Suneka wastewater treatment plant in Kisii county and Kabarnet Level V Hospital in Baringo County Kenya in the months of June and December 2020
 Methodology: Multiple samples were picked in Kisii and Kabarnet waste water treatment plants in the months of June and December correspond to the dry and wet seasons in Kenya. Collected waste water samples were centrifuged and filtered with glass microfiber filter papers and subsequently passed through a Solid phase extractor cartridge. High Performance Liquid Chromatography was used for quantification of antibiotics as per international commission for harmonization and subsequently applied for analysis.
 Results: The results revealed that the dry season had higher antibiotic concentrations at 1.29, 0.09, 2.92 and 1.82 µg/l for sulphamethoxazole, trimethoprim, ampicillin and amoxicillin respectively for the Kisii waste water treatment plant and 0.18, 0.05, 1.34 and 0.09 µg/l respectively for Kabarnet waste water treatment plant. During the wet seasons the measured concentrations were 1.11, 0.14, 2.04 and 1.34 µg/l for sulphamethoxazole, trimethoprim, ampicillin and amoxicillin at the Kisii WWTP, and 0.14, 0.06, 1.01 and 0.09 µg/l for Kabarnet WWTP. The removal efficiencies in the WWTPs, ranged from a high of 94 % to a low of 11.11 % depending on the type of antibiotic in both wet and dry seasons.
 Conclusion: Amoxicillin, ampicillin, trimethoprim and sulphamethaxazole were found in both Kisii WWTPs and Kabarnet WWTPs with nearly all antibiotics having a higher concentration of in the dry season than in the wet season. The highest calculated percentage removal was 94.03 % while the lowest calculated percentage removal was 7.14 %. The results suggest that the two WWTPs are effective for the removal of different types of antibiotics.

Reusing Waste to Save Our Water: Regenerable Bioadsorbents for Effective Oil Sequestration

AbstractAs climate change and environmental damage in the world are rising, the need for efficient waste management and purification is ever‐increasing. At present, the existence of oil in water constitutes a large proportion of this pollution. This oil comes from various sources, including effluents released by industries and oil spills. As such, the removal of oil from marine waters is crucial to combat pollution and preserve the ecology. Bioadsorption has emerged as an efficient method, but the sustainability and eco‐friendliness of this method are yet to be seen. This review summarizes the removal of different types of oil from the marine environment using bioadsorption, i.e., adsorption by biological materials. It briefly describes the adsorption mechanism by means of various bioadsorbents with oil. The preparation and performance of different types of bioadsorbents used in industries are discussed, along with some examples of bioadsorbents that can be applied for the removal of various oils from water. Also, an overview of the regeneration of the adsorbent by various methods is given.

ADSORPTION OF BEMACID RED DYE FROM AQUEOUS SOLUTIONS ON COAL FLY ASH MODIFIED WITH HYDROCHLORIC ACID

<p>The adsorption process gives great results for the removal of different types of colored substances or different, mainly organic pollutants from wastewater. In addition to standard adsorbents (such as activated carbon), cheap and natural adsorbents have been increasingly used in recent times (e.g. clay, zeolites), along with waste materials (fly ash from thermal power plants or different agricultural/plant remains), after proper preparation and modification. Research presented in this article was performed with fly ash from thermal power plant Stanari. The aim of this study was to investigate the possibility of removing Bemacid Red (BR) dye from textile industry wastewater by adsorption on fly ash modified with HCl. After a series of experiments, the optimal process parameters were determined. These parameters were then applied to a wastewater sample obtained by simulating polyamide fabric dyeing. The efficiency of adsorption of BR dyes from aqueous solutions depends directly on the process parameters: contact time, pH value, adsorbent dose and initial adsorbate concentration (dye concentration). Under optimal process conditions, a dye removal rate of 97.1 % was achieved. Analyzing the experimentally obtained data using nonlinear adsorption isotherms, a much better agreement of the Freundlich model with the experimental results was determined (the coefficient of determination is R<sup>2</sup>=0.9787). The obtained data show that the adsorption of Bemacid Red dye on fly ash is multilayered. Optimal parameters of the adsorption process were applied to wastewater obtained by simulating the process of dyeing polyamide fabric with BR dye. The efficiency of adsorption under defined conditions was confirmed through the 100 % removal of dye from a real wastewater sample.</p>

Spinel ferrite nanoparticles as potential materials in chlorophenol removal from wastewater.

Persistent organic pollutants (POPs) including chlorophenols (CPs) are increasing in water effluents, creating serious problems for both aquatic and terrestrial lives. Several research attempts have considered the removal of CPs by functionalised nanomaterials as adsorbents and catalysts. Besides the unique crystal structure, spinel ferrite nanomaterials (SFNs) own interesting optical and magnetic properties that give them the potential to be utilised in the removal of different types of CPs. In this review, we highlighted the recent research work that focused on the application of SFNs in the removal of different CP substances based on the number of chlorine atom attached to the phenolic compound. We have also discussed the structure and properties of SFN along with their numerous characterisation tools. We demonstrated the importance of identifying the structure, surface area, porosity, optical properties, etc. in the efficiency of the SFN during the CP removal process. The reviewed research efforts applied photocatalysis, wet peroxide oxidation (WPO), persulfate activated oxidation and adsorption. The studies presented different paths of enhancing the SFN ability to remove the CPs including doping (ion substitution), oxide composite structure and polymer composite structure. Experimental parameters such as temperature, dosage of CPs and SFN structure have shown to have a major effect in the CP removal efficiency. More attention is needed to investigate the different properties of SFN that can be tailored through different techniques and expected to have major role in the removal mechanism of CPs.

Removal of Pathogenic Bacteria in a Horizontally Fed Subsurface Constructed Wetland Hybrid System

The management of effluents and their treatment is a fundamental issue in water management, the removal of different types of contaminants is another relevant issue for public health and the environment. Bacteria are one of the main types of contaminants in untreated water discharged to receiving bodies. The objective of this research was to evaluate the removal efficiency of pathogenic bacteria in a horizontal feeding subsurface artificial wetland that treats wastewater originated from the Boca de Río Technological Institute, Veracruz, Mexico. A hybrid system composed of seven cells with three types of substrates and ornamental type vegetation was designed; the indicators evaluated were the concentration of total and fecal coliforms and the efficiency of bacterial removal in the stages of the system. The artificial wetland system demonstrated a significant reduction (p < 0.05) between the different cells of the system. The values of pathogenic bacteria removal obtained in the wetland were higher than 99% in the cells of the system and times. In conclusion, it was identified that the interaction of the components of this system and its operation under the climatic seasons of the site influenced the removal efficiency of pathogenic bacteria, allowing optimal removal efficiency.

Oxidative magnetization of biochar at relatively low pyrolysis temperature for efficient removal of different types of pollutants

A novel oxidative magnetization, involving phosphomolybdic acid and Fe(NO3)3 co-promoted pyrolysis, was established to manufacture highly adsorptive magnetic biochars for adsorbing aqueous tetracycline, methylene blue, and Cr6+. The modification of phosphomolybdic acid greatly boosted the formation of γ-Fe2O3 and oxygen containing groups with enhancement of specific surface area and pore volume at 400 °C. Importantly, γ-Fe2O3 was stably fixed on surface in quasi-nanoscale. The oxidized magnetic biochar displayed 631.53, 158.45, 155.13 mg/g adsorption capabilities for tetracycline, methylene blue, and Cr6+ with 22.79 emu/g saturation magnetization, respectively. Oxygen containing groups and quasi-nanoscale γ-Fe2O3 served as key adsorption sites for these pollutants. A general oxidative magnetization was established for manufacturing high-performance magnetic biochar through phosphomolybdic acid/Fe(NO3)3 co-promoted pyrolysis at relatively low temperature.

Nanostructured Bioaerogels as a Potential Solution for Particulate Matter Pollution.

Particulate matter (PM) pollution is a significant environmental and public health issue globally. Exposure to high levels of PM, especially fine particles, can have severe health consequences. These particles can come from a variety of sources, including natural events like dust storms and wildfires, as well as human activities such as industrial processes and transportation. Although an extensive development in air filtration techniques has been made in the past few years, fine particulate matter still poses a serios and dangerous threat to human health and to our environment. Conventional air filters are fabricated from non-biodegradable and non-ecofriendly materials which can cause further environmental pollution as a result of their excessive use. Nanostructured biopolymer aerogels have shown great promise in the field of particulate matter removal. Their unique properties, renewable nature, and potential for customization make them attractive materials for air pollution control. In the present review, we discuss the meaning, properties, and advantages of nanostructured aerogels and their potential in particulate matter removal. Particulate matter pollution, types and sources of particulate matter, health effect, environmental effect, and the challenges facing scientists in particulate matter removal are also discussed in the present review. Finally, we present the most recent advances in using nanostructured bioaerogels in the removal of different types of particulate matter and discuss the challenges that we face in these applications.

Construction of Lanthanide Magnetic Bio-Based Porous Carbon Materials with Beam and Column Structure and Its Synergistic Adsorption Performance.

Biochar porous carbon material (BPCM) has extraordinary adsorption properties and is being widely used in different fields around the world. The pore structure of BPCM is liable to collapse, and mechanical properties are inferior; hence, the focus is on developing a new ″powerful″ structure of functional BPCM. Rare earth elements with characteristic f orbitals are used as pore and wall strengthening units in this work. The new ″beam and column structure″ BPCM was synthesized by the aerothermal method, and then, the magnetic BPCM was prepared. The results showed that the designed synthesis route was reasonable, BPCM with a steady-state beam and column structure was attained, and the La element played a stabilizing role in maintaining the overall BPCM. The La hybridization exhibits the characteristic of ″the stronger column and weaker beam″, and the La group is the ″column″ to strengthen the BPCM as the ″beam″. The functionalized BPCM (lanthanum-loaded magnetic chitosan-based porous carbon materials, MCPCM@La2O2CO3) obtained exhibited a transcendent efficient adsorption capacity with an average adsorption rate of 6.640 mg·g-1·min-1 and over 85% removal of different types of dye pollutants, which exceeded the adsorption performance of the materials of most other BPCMs. Ultrastructural analysis revealed that MCPCM@La2O2CO3 has a huge specific surface area of 1458.513 m2·g-1 and a magnetization value of 16.560 emu·g-1 for MCPCM@La2O2CO3. A new theoretical model for the adsorption of MCPCM@La2O2CO3 (multiple adsorption coexistence equation) was established. The theoretical equations clarify that the mechanism of pollutant removal by MCPCM@La2O2CO3 is different from the traditional adsorption model, presenting a mechanism of coexistence of multiple adsorption types, displaying a monolayer-multilayer adsorption mechanism, influenced by the synergistic effects of H bonding, electrostatic attraction, π-π conjugation, and ligand interaction. The rapid coordination of the d orbitals of La is an obvious factor in enhancing the adsorption efficiency.

Recent Advances of VOCs Catalytic Oxidation over Spinel Oxides: Catalyst Design and Reaction Mechanism.

Volatile organic compounds (VOCs) harm the environment and human health and have been of wide concern and purified efficiently by catalytic oxidation. Spinel oxides, mainly composed of transition metal elements with low price and extensive sources, have been widely investigated as efficient and stable catalysts for VOCs oxidation due to their adjustable element composition, flexible structure, and high thermal/chemical stability. However, it is necessary to dissect the design of the spinel in a targeted way to satisfy the removal of different types of VOCs. This article systematically summarizes the recent advances regarding the application of spinel oxides for VOCs catalytic oxidation. Specifically, the design strategies of spinel oxides were first introduced to clarify their effect on the structure and properties of the catalyst. Then the reaction mechanism and degradation pathway of different kinds of VOCs on the spinel oxides were in detail summarized, and the characteristic requirements of the spinel oxides for various VOCs purification were analyzed. Furthermore, the practice applications were also discussed. Finally, the prospects were proposed to guide the rational design of spinel-based catalysts for VOCs purification and intensify the understanding of reaction mechanisms.

Synthesis, Characterization and Potential Application of Functionalised Binary Metallic Sulphide for Water Reclamation

The present paper highlights the synthesis of novel Citric acid functionalized-Nickel-Cobalt-Sulphide nanoparticles, abbreviated as Ni-Co-S@Ct, via simple co-precipitation method. The prepared nanoparticles have been characterized using several analytical techniques, like XRD, HR-TEM, TGA, HR-SEM, FT-IR, XPS and BET and zeta potential measurements. The prepared Ni-Co-S@Ct nanoparticles have been investigated for the adsorptive removal of different types of pollutants, namely, cationic and anionic dyes, and arsenic ions and interestingly all of these pollutants were removed with high efficiency. The equilibrium sorption capacity of Ni-Co-S@Ct has been found 90.91 mg/g for Methylene blue, 232.55 mg/g for Crystal violet, 357.14 mg/g for Nile blue, 142.9 mg/g for Congo red, 1111 mg/g for As(III) and 2000 mg/g for As(V). The sorption data for these pollutants fitted well to Freundlich and Temkin isotherms which showed the attachment of these ions/molecules to the specific sites at Ni-Co-S@Ct heterogeneous surface. The kinetics of sorption process was explained using the pseudo-second order model which suggested pollutant ion attachment at specific sites at the surface of Ni-Co-S@Ct. The FT-IR and Zeta potential analysis led to the conclusion that electrostatic interaction and metal complexation might be the prominent pathways adopted by the Ni-Co-S@Ct for the sorption of dyes and arsenic ions. The nanomaterials was further investigated for the removal of dyes from the mixture of dyes and the results have been quite promising as the material was found effective for elimination of four dyes simultaneously. Therefore, the high adsorption capacity, low-cost and facile synthesis, takes Ni-Co-S@Ct a step ahead in environmental remediation and wastewater treatment technology.

Jugular foramen anatomy in lateral skull base paraganglioma surgery

To detalize the anatomy of the jugular foramen according to the comparison of cadaver dissections findings and the CT scans data that were performed before the dissections, for improvement of quality of treatment of patients with temporal bone paraganglioma (Fisch type C). The data of CT scans and the steps of the approaches to the jugular foramen (retrofacial and infratemporal approaches with opening of jugular bulb and identification of the anatomical structures of jugular foramen) were analyzed on 10 cadaver heads, 20 sides. Clinical implementation was demonstrated in case of temporal bone paraganglioma type C. Based on the detail study of the CTs data we revealed the individual features of the temporal bone structures. Due to the results of 3D rendering the average length of the jugular foramen in anterior-posterior direction was 10.1 mm. The length of vascular part was larger than the nervous part. The posterior part had the bigger height wherein the shortest part we detected between jugular ridges, which in some cases caused the dumbbell shape of jugular foramen. According to 3D multiplanar reconstruction the distances between jugular crests (3.0 mm) had the lowest measures and the largest was between internal auditory canal (IAC) and jugular bulb (JB) (8.01mm). At the same time, one of the largest variations of values was also identified between IAC and JB (from 4.39 to 9.84 mm). The distance between the facial nerve in the mastoid segment and JB was variable (from 3.4 to 10.2 mm) and determined by the volume and position of the JB. The results of the dissection corresponded to the measurements according to the CT scans, taking into account the 2-3 mm error due to the massive removal of temporal bone during performing of surgical approaches. The detailed knowledge of the surgical anatomy of the jugular foramen based on a thorough analysis of preoperative CT data is the key to an adequate surgical tactic for the removal of different types of temporal bone paraganglioma while preserving the function of vital structures and the quality of life. A larger study on the big data is needed to determine the statistical relationship between the volume of JB and the size of the jugular crest; the correlation between the dimensions of jugular crests and the tumor invasion in the anterior part of the jugular foramen.

Synthesis of multi-layered nanoswabs for simultaneous and expeditious removal of antibiotic-resistant bacteria, dyes, and antibiotics from wastewater

Multi-layered glyoxylic-functionalized triptycene nanoswabs (G-TCNS) were synthesized using a novel one-step intercalation cross-linked polymerization process for simultaneous removal of different types of water contaminants. In this study, expeditious adsorption of the dyes methylene blue(MB) and rhodamine B (RhB), the antibiotics gentamicin (GM) and ofloxacin (OFL), and antibiotic-resistant genes (ARGs), and the removal of three types of emerging antibiotic-resistant bacteria (ARB) from water were studied. A contaminant removal efficiency of 99 % was achieved within 7 min using G-TCNS dosage of 20 mg L−1 at pH 8 and 295 K. The adsorption capacities (Qe) of G-TCNS for the different contaminants were in the range 450–556 mg g−1. The G-TCNS exhibited high adsorption capacities as a result of their multi-layered micro-porous structure and high surface area, and improved water purification due to their excellent water selectivity. The NRs also showed high efficiencies of bacteria removal and inactivation against 107 CFU mL−1 of ARB. They were more effective as an antibacterial agent compared to (unfunctionalized) triptycene nanoswabs (TCNS) and other commercially available antibiotics. The results also revealed that G-TCNS is an efficient, highly recyclable, and eco-friendly adsorbent for the simultaneous removal of various contaminants from water.

On the applicability of triazine-based covalent organic polymer as adsorbent for dye removal from aqueous solution

Triazine-based covalent organic polymer, TCOP, is synthesized via the reaction between cyanuric chloride and piperazine in 1,4-dioxane, and is characterized with FT-IR, EDX, elemental mapping, XRD, SEM, TEM and N2 adsorption/desorption techniques. The capability of TCOP in the removal of different types of dye pollutants is studied and it was found that the removal efficiency is more than 70% for all of them. The kinetics and equilibrium adsorption of Rhodamine B (RhB) was studied at different conditions. Most of the adsorption takes place in less than 20 min and the maximum adsorption capacity is 153 mg/g. The adsorption isotherm can be well described by the modified Langmuir-Freundlich equation and the adsorption kinetics follows the fractal-like pseudo-first order kinetics model. Both of the fitted models reveal the heterogeneity of adsorbent. The adsorption thermodynamics parameters were calculated and interpreted. Finally, it was shown that the prepared TCOP can be used for the removal of dye mixture from aqueous solution.

Analysis and Evaluation of the Progressive Collapse Behaviour of a Cable Dome Structure

In this study, the progressive collapse behaviour of a cable dome structure was analysed and evaluated according to the importance of element. First, the dynamic response and collapse mode caused by the removal of different types of cables and struts from a cable dome structure were studied using the instantaneous unloading method of full dynamic equivalent load. Second, a method was developed for element importance classification based on collapse modes, and the importance coefficient was introduced after comparing the node displacements before and after the removal of different elements. On this basis, the correlations of the importance coefficient of an element with its importance classification and the collapse mode caused by its removal were examined. Third, the influences of some design parameters on the resistance of cable dome structures to progressive collapses and on the importance coefficients of components were analysed and evaluated. Finally, a method was proposed to determine the critical value of the element importance category. The results of this study indicated that Cable-Strut elements differed in their antiprogressive collapse effects and importance coefficients, and thus produced different dynamic responses and collapse modes when they were removed. Cable domes differed in their critical importance coefficients for Cable-Strut elements, and design parameters differed in their influence on the antiprogressive collapse resistance of cable domes.

Sonocatalytic degradation of ciprofloxacin and organic pollutant by 1T/2H phase MoS2 in Polyvinylidene fluoride nanocomposite membrane

The development of recyclable catalysts with effective properties and stable reusability is great importance for the removal of different types of pollutants in wastewater. Herein, we have synthesized Polyvinylidene fluoride (PVDF) polymer and mixed-phase 1T/2H MoS2 for immobilizing the sonocatalyst material. Techniques such as FESEM, XRD, FTIR, XPS, and UV–vis spectra have been used for analyzing the structural, and morphological properties. The formation of a 1T/2H mixed phase in MoS2 has been revealed by XRD and XPS analysis. Consequently, the sonocatalytic performance of the nanocomposite membrane was investigated through ciprofloxacin (CIP) and organic pollutants (Rhodamine B (RhB)). As a result, MoS2/PVDF (PM4) nanocomposite membrane exhibited a superior sonocatalytic activity with 94.37% and 84.37% of RhB and CIP degradation efficiency with pseudo-first-order kinetic constant (k) of 0.0187 min−1, and 0.0044 min−1. The sonocatalytic property of the nanocomposite membrane is related to 1T/2H mixed-phase and PVDF. Additionally, the metallic based 1T phase MoS2 helps to promote electrons and holes and reduce the recombination rate. Moreover, it promotes the generation of more hydroxy radicals (.OH), and superoxide radicals (∙O2−) play a significant role in sonocatalytic degradation of RhB pollutants. Thus, the improved sonocatalytic degradation of 1T/2H MoS2/PVDF composite membrane exhibited its application in real-time wastewater treatment.

Versatile magnetic adsorbent based on sodium p-styrenesulfonate modified sodium alginate composite for effective capture of antibiotic ciprofloxacin, methylene blue and copper ion

In this paper, a novel magnetic sorbent based on silica coated iron oxide (Fe3O4/SiO2, denoted as FS), poly(ethylene imine) (PEI), sodium p-styrenesulfonate (SPS) and sodium alginate (SA) polymer (Fe3O4/SiO2/SA-PEI-SPS, denoted as FSSEP) is successfully prepared by free radical polymerization. Antibiotic (ciprofloxacin, CPX), dye (methylene blue, MB) and heavy metal (copper ion, Cu2+) are used to test the adsorption capacity of the prepared adsorbent. Compared with other adsorbents, FSSEP exhibited good capture efficiency for the pollutants in this study, especially for organic pollutants (CPX and MB). The maximum sorption capacity of FSSEP reached 203.99 mg g−1 for CPX, 423.69 mg g−1 for MB, 41.81 mg g−1 for Cu2+. Hydrogen bonding, electrostatic interaction, π-π interaction and cationic exchange are involved in the sorption mechanism. This study suggests a strategy for the design and synthesis of eco-friendly modified sodium alginate adsorbents through free radical polymerization and explores their potential application in the field of removal of different types of toxic substances.