Contaminant Removal Efficiency Research Articles

Surface charge rearrangement modulation of N, P co-doped carbon induced by iron-cobalt phosphide with cationic vacancies for efficient contaminant removal

Surface charge rearrangement modulation of N, P co-doped carbon induced by iron-cobalt phosphide with cationic vacancies for efficient contaminant removal

Sustainability Prediction by Evaluating the Emergy of a Co-Treatment System for Municipal Wastewater and Acidic Water Using Intermittent Electrocoagulation

The objective of this research was to evaluate the sustainability of a co-treatment system that combines Municipal Wastewater (MW) and Acid Mine Drainage (AMD) through the technique of intermittent electrocoagulation, applied as an advanced solution to improve contaminant removal efficiency and optimize energy balance. Four scenarios were analyzed: Treatment I (with a 1/7 ratio of urban wastewater to AMD), Treatment II (which includes an artificial wetland), Treatment IIIa (which introduces electrocoagulation to enhance sulfate removal and pH regulation), and Treatment IIIb (which employs a 1/15 ratio of AMD to eutrophic water). The methodology focused on calculating key sustainability indicators such as the Net Yield Ratio (EYR), Emergy Inversion Ratio (EIR), Environmental Loading Ratio (ELR), and Sustainability Index (SI), in order to assess the impact of each technology on the energy efficiency and environmental load of the system. The results showed that, although Treatment IIIa was effective in contaminant removal, the EIR increased to 0.18 and the ELR rose to 0.62, indicating a higher reliance on non-renewable inputs due to increased energy demand. However, Treatment IIIb, which combines electrocoagulation with eutrophic water, significantly improved the sustainability of the system, achieving an SI of 2.31 and an ELR of 1.22, reflecting a reduction in energy efficiency due to intensive use of external resources, but overall greater sustainability compared to the other scenarios. This research concludes that intermittent electrocoagulation, when integrated with synergistic resources like eutrophic water, can enhance contaminant removal efficiency and improve the use of renewable resources, minimizing environmental load and increasing the sustainability of wastewater treatment systems.

Adsorptive Removal of Dyes: A Comparison of Graphene Oxide to Granular Activated Carbon and Zeolite NaY

Synthetic carbon-based compounds are a prevalent wastewater contaminant that can adversely impact water resources due to their potential carcinogenic and toxic effects on aquatic biota and human health. This research investigates the versatility of graphene oxide (GO) as an alternative to commonly used adsorbents (zeolite NaY (NaY) and granular activated carbon (GAC)) for removal of synthetic cationic dyes. Rhodamine B (RhB) and methylene blue (MB), were selected as the target contaminants to represent cationic synthetic dyes with differing molecular sizes and structural compositions. Batch experiments using GO, NaY, and GAC as adsorbents were used to assess both physicochemical interactions between adsorbent surfaces and contaminants, and removal efficiency. GO demonstrated the highest removal efficiency for both target contaminants—at 99% and 86%, respectively—while the lowest removal efficiency was observed for NaY. Langmuir, Freundlich, Temkin, and BET isotherm models were used to describe the adsorption isotherms. Overall, GO demonstrated a more robust and higher removal efficiency of cationic dyes compared with GAC and NaY, indicating the potential of graphene oxide for the removal of complex structured organic contaminants in wastewater treatment.

Insight into the Efficient Selective Reduction of Cr(VI) in Sulfite/UV Process under Near-Neutral Conditions: The Critical Role of In Situ-Generated Sulfite Radical.

Efficient removal of contaminants in complex water matrices under mild conditions is highly desirable but still challenging. In this study, we unraveled the overlooked but crucial role of sulfite radical (SO3·-) in the efficient selective reduction of toxic Cr(VI) under near-neutral conditions. Fast removal of Cr(VI) at around pH 7 in sulfite/UV was found to be attributable to high reactivity of SO3·- toward HCrO4- (∼5.3 × 106 M-1 s-1). Furthermore, SO3·- was fast generated in situ via one-electron oxidation of S(IV) by transient reactive protonated Cr(V) and Cr(IV) intermediates. Therefore, the specific reactivity of SO3·- and its in situ generation together resulted in the surprisingly positive effect of nitrate and the efficient reduction of Cr(VI) in authentic surface water and industrial wastewater. A mathematical model was developed to simulate Cr(VI) removal in the process, and thus quantitatively demonstrated the roles of reactive species, i.e., SO3·- contributed to ∼93% of Cr(VI) reduction in surface water. Overall, this study provides an insight into the pivotal role of SO3·- in Cr(VI) reduction, and underscores its significance in selective reduction and detoxification of contaminants.

Performance Evaluation of a Pilot-Scale Constructed Wetland with Typha latifolia for Remediation of Domestic Wastewater in Zimbabwe

The management of wastewater remains a challenge, particularly in developing countries. The potential use of constructed wetlands to treat wastewater is promising but their contaminant removal efficiencies, particularly in a tropical country such as Zimbabwe, are not fully understood. A pilot-scale study was undertaken in Zimbabwe to evaluate the efficiency of vertical-flow constructed wetlands planted with Typha latifolia in the treatment of domestic wastewater. Four pilot subsurface vertical-flow constructed wetland units (measuring 1 m × 1 m × 1.1 m) were built from concrete. The units were filled with waste rock from a nickel mine. Three units were planted with Typha latifolia while the fourth one was left unplanted, acting as the control. Each unit was loaded with wastewater at a rate of 220 dm3/day. Physico-chemical and bacteriological parameters were analyzed during the winter season. Physico-chemical and bacterial contaminant concentrations were significantly lower in the effluent than in the influent, and the system achieved maximum removals for BOD5, COD, TDS, TSS, nitrates, phosphates, phosphate pentoxide, phosphorus, and E. coli of 56.01%, 82.87%, 30.61%, 90.40% 17.26%, 35.80%, 36.19%, 40.64%, and 90.28%, respectively. The study shows that constructed wetland systems can be successfully established for the removal of physical, chemical, and microbial contaminants from domestic wastewater.

Oxygen vacancy and boron dual sites enable efficient oxygen activation for emerging contaminant degradation: Boosted exciton dissociation via built-in electric field modulation

Two-dimensional (2D) layered materials are promising photocatalysts for environmental remediation through O2 activation. However, the inherent robust excitonic effects from the confined-layer structure hinder the generation of highly oxidative free radicals from the preferred charge transfer pathway. Taking 2D BiOBr as a prototype, we implemented a superficial surface boronizing method to incorporate oxygen vacancy (OV)-boron (B) dual sites onto the surface. The OV-B dual sites disorder the surface atomic arrangement of BiOBr and induce strong built-in electric field (BEF). This effectively weakens exciton binding energy, boosts exciton dissociation into free charges, and facilities the transfer and separation of free charges, which collectively enables charge transfer to surpass excitonic effects as the dominant O2 activation pathway. Consequently, BiOBr with OV-B dual sites outperforms pristine and mono-OV modified BiOBr in both O2 activation and emerging contaminant degradation. This work offers insightful strategies for modulating 2D photocatalysts to optimize O2 activation towards efficient contaminant removal.

Efficiency of water hyacinth and cattail for wastewater treatment using constructed wetland

Constructed wetlands have emerged as a cost-effective, eco- friendly and sustainable solution to enhance water quality by effectively removing nutrients. The objective of this study is to compare water hyacinth (Eichhornia crassipes) and Cattail (Typha latifolia) as wetland plants for wastewater treatment at the National Water Resources Institute (NWRI) situated in Kaduna State, Nigeria. The percentage removal of various parameters including pH, Total Dissolved Solids (TDS), Turbidity, Total Suspended Solids (TSS), Biochemical Oxygen Demand (BOD), Chemical Oxygen Demand (COD), Total Phosphorus, Nitrate, Ammonia, Sulphate, Oil and Grease, Total Coliform, Feacal Coliform, Copper, Zinc, Iron and Lead were compared for cattail and water hyacinth. The results of the analyzed parameters were compared with the Food and Agricultural Organization of United Nations (FAO, 2015) limits for irrigation purposes. Results showed pH, TDS, Turbidity, TSS, Sulphate, Nitrate, BOD, COD, FC, and Iron, Copper, Lead and Zinc were within permissible limit of the standard for irrigation water quality according to FAO, while EC and Total Phosphorous were above the maximum permissible limit. The result of the percentage removal efficiency showed that water hyacinth had higher performance in removing the pH (13.34%), Turbidity (97.24%), Sulphate (100%), Nitrate (18.51%), Total Phosphorous (96.34%), COD (86.21%), BOD (77.92%), Oil and Grease (73.80%), FC (78.48%), TC (36.24%), Copper (81.84%), Lead (89.69%) and Zinc (79.38%) compared to typha latifolia. For 82.61% EC, 82.09% TDS, 94.51% TSS, 97.31% Iron and removal, efficiency of typha latifolia was higher. Constructed Wetland vegetated with typha latifolia and Eichhornia crassipes showed high contaminant removal efficiency with water hyacinth showing superior removal efficiency

Effect of Voltage variation on the Geotechnical Properties and Removal Efficiency of Heavy Metal Contaminants from Contaminated Soil using Electrokinetic Remediation Technique

A lot of research work has shown that despite the effectiveness of the electrokinetic remediation technology in decontaminating heavy metal contaminated soils, more work is still required to fully understand the role of voltage in the remediation process. There is need to establish the optimum voltage that would best remove heavy metals from such contaminated soil and its attendant effect on the geotechnical properties of the remediated soil. Effect of voltage variation on the removal efficiency of lead, copper and the geotechnical properties of remediated heavy metal contaminated soil using electrokinetic remediation technique was investigated in this research. The contaminated soil was remediated by applying direct current (DC) to the remediation setup at 0.5V/cm, 1.0V/cm, 1.5V/cm and 2.0V/cm. The concentration of the heavy metals after remediation were determined using the Oxford Instrument Analyzer to evaluate removal efficiency, geotechnical properties tests were also conducted on the soil specimens at each phase of remediation. The results showed that the lead removal efficiency was highest at 2.0V/cm (86%) with the shortest remediation time of 5days and lowest at 0.5V/cm (39%) at 9days. 52% of copper was removed at 2.0V/cm in 5days and 29% at 0.5V/cm after 9days of remediation. At 1.0V/cm, the lead and copper removal efficiency are 75% and 40% respectively. There was no significant change in the Specific Gravity of all the soil samples with the test results lying between 2.0 and 2.2. The soil is generally silty fine sand with not less than 40% passing the sieve no.200 (75micron). 45% passed through sieve 75micron for unremediated soil and slightly reduced to 40%, 40.4% and 40.2% for 30V, 45V and 60V respectively. The soil is non-plastic with the liquid limit of between 25.8% and 29.5% belonging to the A-4 group of soil. The maximum dry density improved across all the three compactive efforts, from 1.8390g/cm3 to 1.8480g/cm3 with WAS compactive effort and from 1.8000g/cm3 to 1.8320g/cm3 with BSL method with an average optimum moisture content of 10%. The CBR values increases with increase in voltage applied. The unsoaked CBR values averagely increased with 31%, 18% and 7% for BSH, WAS and BSL compactive efforts respectively. The durability index with resistances of 89% and 90% to loss in strength was recorded at 1.0V/cm and 1.5V/cm respectively, this, when compared to the resistance to loss in strength of 71% in unremediated soil has respectively 25.3% and 26.8% durability advantages. There was also a consistent increase in the UCS values, from 381kN/m2 to 474kN/m2 and from 351kN/m2 to 447kN/m2 when WAS and BSL methods of compaction were used. Generally, there was improvement in the geotechnical properties of the remediated soil. These improvements are maximum at 1.0V/cm and 1.5V/cm with little or no further improvement at 2.0V/cm. It is recommended that 1.0V and 1.5V are suitable for remediation purpose since it requires low energy consumption.

Using flow-through reactor to enhance ferric ions electrochemical regeneration in electro-fenton for wastewater treatment

Electrochemical regeneration of ferric ions catches more and more attention since it could decrease iron sludge to avoid the sludge problem while it could simultaneously obtain similar robust removal efficiency to refractory organic contaminants in wastewater treatment as the normal Fenton agent method. However, the electrochemical regeneration of ferric ions in aqueous solution was very slow. In this paper, the mass transfer limit of ferric ions in electro-Fenton reaction was evaluated. Koutecky-Levich equation reveals an extremely low diffusion coefficient (D0) value of ferric ions since its complex coordination of [Fe(HO)x(H2O)6-x]3-x. The D0 value was only 2.70 × 10−6 cm2·s−1. Flow-through reactor was therefore introduced in which the ferric ions was designed to penetrate through the 73.1 μm porous holes in the graphite fiber electrode. The μm-scaled confinement of ferric ions diffusion inside the holes was proved to successfully enhance the reduction current of ferric ions by more than 200 % since the diffusion distance of the ferric ions was significantly decreased in the flow-through reactor. However, besides the benefit of the flow-through reactor, the ferric ions reduction electro-Fenton (FeRR electro-Fenton) in flow-through still faces both the pH limit and H2O2 decomposition problems. Hydrogen evolution reaction (HER) could also cause the decrease of pH which exceeded the optimal pH window for Fenton and therefore destroyed the electro-Fenton reaction consequently although the electrochemical reaction of FeRR was 770 mV prior to HER reaction. The regeneration of Fe (II) process simultaneous destruction of H2O2 since H2O2 e-reduction was 120 mV prior to FeRR reaction, which resulted in only very low H2O2 concentration suitable for FeRR electro-Fenton. Even using stepwise addition of H2O2 in electro-Fenton, the decomposition of H2O2 still could not be avoided. Although the decomposition of H2O2 quite limited the application of FeRR electro-Fenton in real application, FeRR electro-Fenton still supports the enhancement removal efficiency of the refractory organic contaminants under low organic contaminants application.

Nanotechnology advancements in groundwater remediation: A comprehensive analysis of current research and future prospects

Groundwater contamination is a critical environmental issue with vital health implications. This review evaluates the advancements in nanotechnology for groundwater remediation, highlighting major findings and their relevance to Sustainable Development Goals (SDGs). Key findings include the superior adsorption capabilities of multi-walled carbon nanotubes functionalized with various groups for removing heavy metals and aromatic pollutants, outperforming traditional sorbents. The review also discusses the potential of nanomaterials like zero-valent iron nanoparticles for effective contaminant degradation. Despite promising results in the studies, challenges such as the movement and dispersion of engineered nanomaterials in porous media and the need for innovative delivery methods are identified. Furthermore, this review explores the environmental and health risks associated with the use of nanomaterials, emphasizing the need for risk assessments to ensure safe application. The novel delivery methods assessed, such as the use of groundwater circulation wells and the combination of nanoremediation with other techniques like bioremediation, demonstrate potential to enhance remediation efficiency. The integration of nanotechnology in groundwater remediation directly contributes to Clean Water and Sanitation by providing innovative solutions for the purification of water resources. Advanced nanomaterials not only improve contaminant removal efficiency but also promote sustainable water management practices. Additionally, the environmental benefits align with Life on Land, as the reduction of hazardous substances in groundwater protects terrestrial ecosystems and promotes biodiversity conservation. This review study aims to enhance understanding and identify future opportunities for nanotechnology in groundwater remediation. By addressing current challenges and proposing innovative solutions, this review underscores the importance of interdisciplinary research and collaboration in advancing sustainable development.

Efficient electrochemical removal of ammoniacal nitrogen from livestock wastewater: The role of the electrode material

Wastewater from livestock farms contains high concentrations of suspended solids, organic contaminants, and nitrogen compounds, such as ammoniacal nitrogen. Discharging livestock effluents into water bodies without appropriate treatment leads to severe environmental pollution. Compared to conventional treatment methods, electrochemical oxidation exhibits higher nitrogen removal efficiencies. In the present work, the electrochemical removal of ammoniacal nitrogen from real livestock wastewater was investigated through a lab-scale reactor. Preliminary experiments were carried out to investigate the effects of different anode materials, including boron-doped diamond and iridium/ruthenium-coated titanium, on the total nitrogen removal efficiency using synthetic wastewater. Boron-doped diamond, a well-known non-active electrode, allowed to obtain 63.7 ± 1.21 % of total nitrogen degradation efficiency. However, the iridium/ruthenium-coated titanium electrode, belonging to the class of active anodes, showed a higher performance, achieving 78.8 ± 0.76 % contaminant degradation. Coupling iridium/ruthenium-coated titanium anode with a stainless-steel cathode improved the performance of the system, achieving even 96.2 ± 2.73 % of total nitrogen removal. The optimized cell configuration was used to treat livestock wastewater, resulting in the degradation of 67.0 ± 2.25 % of total nitrogen and 37.3 ± 0.68 % of total organic carbon when sodium chloride was added. At the end of the process, the ammonium content was completely removed, and only 17.7 ± 0.51 % of the initial nitrogen turned into nitrate. The results show that the proposed system is a promising approach to treating livestock wastewater by coupling high contaminant removal efficiencies with low operational costs. Anyway, further studies on process optimization with an emphasis on power requirements and electrode costs need to be carried out.

Construction of N-Fe-S bridge in atomic iron catalyst for boosting Fenton-like reactions

Constructing the coordination environment of single-atom catalysts (SACs) can be an attractive technical strategy to regulate the generation of reactive oxygen species for Fenton-like reactions. Herein, we have constructed an asymmetric coordination of Fe single-atom catalyst (FeSA-NS-PCNS) with abundant N-Fe-S bridge (FeSA-N3S1) for robust Fenton-like reactions. 82.5 % of singlet oxygen (1O2) selectivity and high turnover frequency of bisphenol A degradation (0.568 min−1) were achieved at mild conditions. Experimental works and theoretical analyses illustrated that S doping breaks the inert environment of the original N-Fe-N symmetric coordination equilibrium and modulates the electron density of the atomic Fe center, which is beneficial for boosting PMS adsorption and reducing the energy barriers of vital *OH and *O intermediates. The coupling between the FeSA-N3S1 interface and peroxymonosulfate molecule boosts in-situ electron transfer through the N-Fe-S bridge, which induces more electron flow from the low valence Fe to OH* on the surface of Fe-*O-H, forming a high yield of 1O2. Moreover, we designed the Fenton-like reactions by FeSA-NS-PCNS membrane reactor for an efficient contaminant removal rate of over 90 % even after 11 cycles. This work provides a novel perspective on developing SACs with asymmetric coordination to regulate reactive oxygen species for the treatment of organic contaminants in water bodies.

A novel piezoelectric fenton-like process mediated by FeOCl for efficient contaminant removal

Ferric oxychloride (FeOCl), an iron-based catalyst with a unique coordination structure, has demonstrated effective pollutant removal capabilities in various reaction systems such as photo-Fenton, Fenton-like, and electro-Fenton processes. However, in previous studies, little or no attention has been paid by researchers to the piezoelectric properties of FeOCl and the pollutant removal performance exhibited in the presence of piezoelectric fields. In this study, we observed that the piezoelectric effect significantly enhanced the Fenton-like reaction process of FeOCl. Whereas the piezoelectric properties of FeOCl have not been reported in the previous research. The process significantly enhances the kinetic removal rate of pollutant, which is 3.12 times higher than the Fenton process and 18 times higher than the Fenton-like process for FeOCl. Furthermore, we observed a significant increase in the kinetic removal rate of pollutant after lattice distortion of FeOCl under the piezoelectric field and revealed how this process mediates the ultrafast oxidative removal process. Notably, we also detect the formation of pollutant polymeric products during the piezoelectric enhancement process, confirming the existence of a pollutant polymerization pathway during piezoelectric catalysis. The piezoelectric-enhanced FeOCl Fenton-like process constructed in this study not only provides important theoretical support for the practical application of FeOCl but also opens new research perspectives for the application of FeOCl in the field of piezoelectric catalysis.

A column study: Impact of redox, substrate composition and exposure order on toluene and benzene biodegradation and microbial communities

Aromatic compounds persist as hazardous contaminants in both aquatic and terrestrial environments, needing rapid and effective remediation strategies. This study evaluated toluene and benzene biodegradation under sulfate and nitrate-reducing conditions in column experiments, utilizing aquifer sediments from a contaminated site. Over a period of 36 weeks, four glass columns were operated simultaneously in an alternating flow-batch regime. Each column received either nitrate or sulfate as an electron acceptor while being exposed to different substrate compositions in varied exposure orders. A redox dependent contaminant removal efficiency was observed, with toluene removal efficiency at 81% under sulfate and 55% under nitrate-reducing conditions, and benzene removal efficiency approximately at 44% and 59%, respectively, within 4–6 weeks. The rapid removal under anaerobic conditions was attributed to the alternating flow-batch regime, allowing biomass growth in batch mode, and applying selection pressure to non-specific biodegraders during flow regime. Toluene removal remained unaffected by benzene's presence but exhibited slight inhibition in the presence of an aromatic mixture composed of BTEX, indene, indane, and naphthalene. Benzene removal efficiency dropped to 8% in the presence of toluene but remained unaffected by the mixture. Pre-exposure to a single compound enhanced breakdown efficiency when further faced with a more complex mixture. Additionally, beta-diversity analysis conducted on the four columns revealed distinct microbial community clustering between sulfate and nitrate-reducing conditions, emphasizing the determining role of redox conditions. Findings of this study can be used to develop more effective pollution cleanup strategies, specifically targeting parameters like redox conditions, substrate interactions, and pollution history, thus improving our ability to mitigate contamination across diverse environments.

Effects of exhalation modes and spatial distribution of an infected person on contaminant transmission in a classroom

Classrooms pose a huge risk from the cross-infection of respiratory infections. However, quantitative research on the combined effect of the location of the infected individual and exhalation activities on the diffusion and dissemination of contaminants in a classroom is lacking. We elucidated the effects of spatial distribution and exhalation modes of infected individuals, especially when they talk and breath nasally, on dissemination of contaminants under different ventilation modes: mixing (MV) and stratum ventilation (SV), using computational fluid dynamics, and calculated the contaminant removal efficiency (CRE) and personnel infection time (tin). Infected individuals’ exhalation modes and spatial distribution significantly affected indoor exposure risk. Under SV, risk was low (tin > 0.75 h) when infected individuals talk, but significantly higher (tin ≤ 0.75 h) during nasal exhalation. In MV, risk was lower (tin > 0.75 h) when infected individuals were near the outlet, but increased (tin ≤ 0.75 h) when they were further away. CRE revealed that MV was more sensitive to location changes (12.4- and 5.8-fold) than to exhalation mode changes (2.1- and 0.99-fold). Conversely, SV was more sensitive to exhalation mode changes (5.7- and 2.8-fold) than to location changes (3.7- and 1.8-fold), emphasizing the importance of the distribution of infected individuals and exhalation modes in classroom ventilation design.

Tourmaline triggered biofilm transformation: Boosting ultrafiltration efficiency and fouling resistance

Ultralow pressure filtration system, which integrates the dual functionalities of biofilm degradation and membrane filtration, has gained significant attention in water treatment due to its superior contaminant removal efficiency. However, it is a challenge to mitigate membrane biofouling while maintaining the high activity of biofilm. This study presents a novel ceramic-based ultrafiltration membrane functionalized with tourmaline nanoparticles to address this challenge. The incorporation of tourmaline nanoparticles enables the release of nutrient elements and the generation of an electric field, which enhances the biofilm activity on the membrane surface and simultaneously alleviates intrapore biofouling. The tourmaline-modified ceramic membrane (TCM) demonstrated a significant antifouling effect, with a substantial increase in water flux by 60 %. Additionally, the TCM achieved high removal efficiencies for contaminants (48.78 % in TOC, 22.28 % in UV254, and 24.42 % in TN) after 30 days of continuous operation. The fouling resistance by various constituents in natural water was individually analyzed using model compounds. The TCM with improved electronegativity and hydrophilicity exhibited superior resistance to irreversible fouling through increased electrostatic repulsion and reduced adhesion to foulants. Comprehensive characterizations and analyses, including interfacial interaction energies, redox reaction processes, and biofilm evolutions, demonstrated that the TCM can release nutrient elements to facilitate the development of functional microbial community within the biofilm, and generate reactive oxygen species (ROS) on the membrane surface to the degrade contaminants and mitigate membrane biofouling. The electric field generated by tourmaline nanoparticles can promote electron transfer in the Fe(III)/Fe(II) cycle, ensuring a stable and sustainable generation of ROS and bactericidal negative ions. These synergistic functions enhance contaminant removal and reduce irreversible fouling of the TCM. This study provides fundamental insights into the role of tourmaline-modified surfaces in enhancing membrane filtration performance and fouling resistance, inspiring the development of high-performance, anti-fouling membranes.

Evaluation of airborne transmission of respiratory contaminants in a passenger car cabin with window opening

Exhaled aerosols can be suspended in the air for long periods, facilitating the transmission of highly infectious respiratory diseases. The risk of exposure to occupants varies due to different usage conditions and driving scenarios of moving vehicles. Therefore, the present study investigates the airborne transmission of contaminants generated by coughing in a moving vehicle and explores the relationship between aerosol dispersion and fluid exchange between the interior and exterior domains of the car under the influence of window opening configurations, seating layouts and driving speeds. The results show that the cross-opening configurations provide a superior contaminant removal efficiency. The effect of seating layout on removal efficiency is significant, although it has a slight effect on air change rate (ACH). The best removal efficiency can be obtained when the passenger sits in the front seat with the right front window opening. Furthermore, the in-cabin ACH is almost linearly correlated with the driving speed. Higher speeds reduce contaminant concentrations faster. However, the risk of driver exposure does not depend solely on ACH, the peak cumulative contaminant concentration and residence time also need to be considered. This study offers data for the prevention and control of respiratory infectious diseases.

Investigations of nanomaterial-based membranes for efficient removal of contaminants from wastewater via membrane distillation: a critical review

The requirement for wastewater treatment is paramount in ensuring environmental sustainability and safeguarding public health. As industrialization and urbanization accelerate, the volume of wastewater generated continues to increase, containing a diverse range of pollutants and contaminants. Untreated wastewater poses serious threats to ecosystems, water bodies, and human communities, leading to pollution, waterborne diseases, and ecological imbalances. Effective wastewater treatment becomes essential to mitigate these adverse effects by removing or reducing pollutants before discharge into natural water sources. This process helps to preserve water quality, protect aquatic life, and maintain the overall health of ecosystems. Membrane distillation (MD) has emerged as a promising technology for wastewater treatment, offering an innovative approach to address the challenges associated with conventional treatment methods. In MD, a hydrophobic membrane serves as a selective barrier, allowing water vapor to pass through while preventing the passage of contaminants. This paper offers an extensive overview of the latest advancements in nanotechnology and membrane distillation applied in wastewater treatment. We will delve into different types of nanomaterials that have been used to enhance the properties of MD membranes, such as nanocomposites, nanoparticles, and nanofiber membranes. We also explore the mechanisms by which these nanomaterials improve the separation efficiency, anti-fouling properties, and durability of MD membranes. Additionally, we highlight the potential of hybrid membranes that combine different types of nanomaterials for further improving the performance of MD in wastewater treatment. We provide examples of recent studies that have investigated the use of hybrid membranes, including carbon nanotube-graphene oxide hybrid membranes, nanocomposite nanofiber membranes, and silver nanoparticle-embedded membranes. We also identify some areas for future research and development, such as the scale-up and commercialization of nanotechnology-based MD systems. In summary, this review paper highlights the potential of nanotechnology to enhance the performance of MD in wastewater treatment, leading to improved water quality and a cleaner environment.

Removal efficiency of restroom ventilation revisited for short-term evaluation

Ventilation efficiency or contaminant removal efficiency is often evaluated using the ratio between the concentrations in the exhaust air and the room air. This ratio does not truly represent the expectation of ventilation in restrooms, where dynamic airflow fields and sources are more typical. This study focuses on a short-term (10 min) pollutant removal percentage in a residential restroom featuring a dynamic airflow field, particularly with the onset of window-induced stack ventilation during toilet uses. Thirteen ventilation scenarios of a residential restroom were studied using the numerical method that was validated by a mock-up experiment. The scenarios differed in the operation of the exhaust fan and window. Results show that the 10-min pollutant removal percentage of a typical exhaust ventilation system at 10 h-1 air change rate (ACH) is only 68.5%. Under exhaust ventilation, opening the window can introduce both adverse short circuit and favorable stack ventilation depending on the difference between the indoor and outdoor temperatures. As the temperature difference increases from 0 to 12.5 °C, the removal percentage increases from below 50%, a drop due to short circuit, to above 98% thanks to a tripled ventilation rate. The human thermal plume has notable effect on the removal percentage, but its effect can be neglected with the presence of stack ventilation. The hybrid ventilation strategy has impact on perceived air quality and thermal comfort. When the outdoor air is colder, opening the window under exhaust ventilation may increase the current sitting user’s exposure to the self-produced pollutants but can reduce the exposure of the next immediate standing user. In addition, opening the window in cold days will make the toilet user thermally uncomfortable with reduced local temperatures and increased airflow velocities. The study highlights the importance of using the short-term removal percentage to evaluate the performance of restroom ventilation.

Study on quality of treated wastewater for urban agriculture use in Addis Ababa, Ethiopia

Non-conventional water supplied from Bole Lemi Industrial Park (BLIP) in Addis Ababa, Ethiopia is treated to remove contaminants, but never has been analyzed for its quality for urban agriculture (UA) use. The objective of this study is to analyze the quality of treated wastewater (TWW) using treated wastewater quality index (TWWQI). Treated wastewater samples were taken at the influent and effluent of the wastewater treatment plant located within BLIP. The physico-chemical properties of the water samples from BLIP were analyzed at the third-party laboratory. The result showed that the aggregate TWWQI value falls under the category of very poor water for urban irrigation agriculture (UIA) use. This very poor water quality grade attributes 85 % to the presence of heavy metals, 4 % to nutrients load, 8 % to saline condition contributors and 4 % to miscellaneous contaminants. Discrete analyses of the indices for heavy metals, nutrient loads, saline condition contributors and miscellaneous contaminants shifted the water quality from very poor to very polluted, excellent, poor and good for UIA use respectively. Though the aggregate TWWQI is of very poor category for UIA use, the treatment plants of BLIP exhibited contaminants removal efficiencies of between 30 and 100 % with aggregate removal efficiency of 58 %. Results also revealed that there were contaminants that exhibited higher effluent values than influent after treatment indicating the failure of BLIP’s treatment plants to remove these contaminants. In conclusion, treated wastewater from BLIP, falls under very poor water category for use in irrigation agriculture where Cr+3, Cl− and TDS have contributed most in that order. Therefore, BLIP should upgrade and optimize its treatment plants to increase the removal efficiency for the respective contaminants. Moreover, BLIP should enhance the capacity of the experts through training and continually monitor the quality of the water to protect the environment and ensure its contribution to the building of a resilient city.