Remote Backup Protection Research Articles

Identifying the Primary Fault Section After Contingencies in Bulk Power Systems

This paper deals with the problem of fault section estimation in electric power systems, undertaken at a control center level and using information about the operation of protection relays and circuit breakers. The developed methodology should be used after the occurrence of contingencies with definitive disconnections, and before beginning the process of network restoration. Due to the absence of an analytic formulation, the problem calls for the use of artificial-intelligence techniques, such as neural networks and expert systems. Neural networks are employed to model the protection systems, dealing with the uncertainties involved with relay and circuit-breaker operation messages. An expert system is used to complement the results provided by the neural networks, considering the network topology. The results show that the developed methodology is applicable to real large-scale power systems. In addition, it is capable of noise suppression in relay and circuit-breaker trip messages, treats multiple faults naturally, and infers a solution even in cases when remote backup protection action occurs.

An enhanced zone 3 algorithm of a distance relay using transient components and state diagram

Zone 3 of a distance relay is used to provide the remote backup protection in case of the failure of the primary protection. However, the risk of maloperation under stressed conditions such as heavy loading, voltage, and transient instability is quite high. Zone 3 is used in combination with the derivatives of the voltage and current, etc. to prevent maloperation. At times, the impedance characteristics that restrict the tripping area of relay are used to avoid maloperation due to load encroachment. This work presents a novel zone 3 scheme based on combining the steady-state components (i.e., 60 Hz) and the transient components (TCs) using a state diagram that visualizes the sequence of studies that emanate from the sequence of events. The simulation results show that the novel zone 3 distance relay elements using the proposed method operate correctly for the various events.

A digital distance relay using negative sequence current

The configuration and performance of a recently developed digital distance relay using negative sequence current for remote backup protection are described. Since relays for remote backup protection are designed for remote faults, the fault current that is input to the relay is small due to the influence of current distribution factors. This in turn makes the relay sensitive to the effects of load current. In order to resolve this problem, a distance relay using negative-sequence current has been developed and put into use. The characteristics of this relay are: (1) the effects of load current are reduced, so the relay rarely maloperated due to load current during a fault; and (2) the hardware configuration of a digital relay that performs calculation on a negative component is simple and thus relatively error-free.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>