Relevant Tissue Engineering Research Articles

Combining biomechanical stimulation and chronobiology: a novel approach for augmented chondrogenesis?

The unique structure and composition of articular cartilage is critical for its physiological function. However, this architecture may get disrupted by degeneration or trauma. Due to the low intrinsic regeneration properties of the tissue, the healing response is generally poor. Low-grade inflammation in patients with osteoarthritis advances cartilage degradation, resulting in pain, immobility, and reduced quality of life. Generating neocartilage using advanced tissue engineering approaches may address these limitations. The biocompatible microenvironment that is suitable for cartilage regeneration may not only rely on cells and scaffolds, but also on the spatial and temporal features of biomechanics. Cell-autonomous biological clocks that generate circadian rhythms in chondrocytes are generally accepted to be indispensable for normal cartilage homeostasis. While the molecular details of the circadian clockwork are increasingly well understood at the cellular level, the mechanisms that enable clock entrainment by biomechanical signals, which are highly relevant in cartilage, are still largely unknown. This narrative review outlines the role of the biomechanical microenvironment to advance cartilage tissue engineering via entraining the molecular circadian clockwork, and highlights how application of this concept may enhance the development and successful translation of biomechanically relevant tissue engineering interventions.

Stem Cell Technology in Organ Transplantation: A Novel Method for 3D Bioprinting Functional and Stable Liver Grafts Using Human iPS Cells Derived Cells.

For decades, scientists and physicians aim to generate functional human tissues in the laboratory using stem cells. In this section, we will describe a novel method that combines state-of-the-art stem cell culture with 3D bioprinting to generate potentially transplantable tissue grafts. For this purpose, we will use the liver as a model. The liver is an important metabolic hub and responsible to perform many endocrine and exocrine vital functions. It is estimated that two million deaths/year are associated with liver disease. This illustrates the need for developing new efficient alternatives for liver transplantation. Modern 3D bioprinting technologies in combination with autologous induced pluripotent stem cells (iPS)-derived grafts could represent a relevant tissue engineering approach to treat end-stage liver disease. Here, we described a novel method for 3D bioprinting functional and stable liver grafts using human iPS-derived cells. The novel method described in this section uses the hepatocyte-like cells in a spheroid culture format (i.e., obtained from three-dimensional cell culture), in combination or not with non-parenchymal cells (e.g., mesenchymal and endothelial cells), which generates the final liver graft. This method has proved to sustain epithelial phenotype and to increase the stability and functionality of the constructs for prolonged periods.

Use of Human Gingival Fibroblasts for Pre-Vascularization Strategies in Oral Tissue Engineering.

Cocultures of human gingival fibrobasts (hGF) and endothelial cells could enhance regeneration and repair models as well as improve vascularization limitations in tissue engineering. The aim of this study was to assess if hGF could support formation of stable vessel-like networks. Explant primary hGF were isolated from gum surgical wastes collected from healthy patients with no history of periodontitis. Human umbilical vein endothelial cells (HUVEC) were two-dimensional (2D) and three-dimensional (3D) cocultured in vitro with hGF at a cell ratio of 1:1 and medium of 1:1 of their respective media during at least 31days. Vessel quantification of HUVEC networks was performed. In order to investigate the pericyte-like properties of hGF, the expression of perivascular markers α-SMA, NG2, CD146 and PDGFR-β was studied using immunocytochemistry and flow cytometry on 2D cultures. hGF were able to support a long-lasting HUVEC network at least 31days, even in the absence of a bioreactor with flow. As observed, HUVEC started to communicate with each other from day 7, constructing a network. Their interconnection increased significantly between day 2 and day 21 and lasted beyond the 31days of observation. Moreover, we tried to explain the stability of the networks obtained and showed that a small population of hGF in close vicinity of HUVEC networks expressed perivascular markers. These findings highlight a new interesting property concerning hGF, accentuating their relevance in tissue engineering and periodontal regeneration. These promising results need to be confirmed using more 3D applications and in vivo testing.

Fabrication of biomimetic patterned PCL membranes mimicking the complexity of Rubus fruticosus leaves surface

The development of bioresponsive interfaces that can induce a beneficial impact on cell mechanisms, such as adhesion, proliferation, migration and differentiation are of utmost relevance in Tissue engineering (TE) approaches. The surface topography is a captivating property that contribute to interesting cell responses, being inspired by several cues found in nature. Therefore, the study herein presented reports the fabrication of a surface topography using the Rubus fruticosus leaf on spin casting polycaprolactone (PCL) membranes. The topography was replicated by replica molding rapid fabrication technique and nanoimprint lithography (NIL). The biomimetic patterned PCL membranes (bpM) were successfully produced revealing high detail due to the complexity of the leaf’s surface ranging from the stroma structures to nerves structures. The thermal evaluation revealed a slight increase of crystallinity of the bpM compared with the other tested conditions. However, did not induce significant effects on the melting and recrystallization temperatures. The mechanical properties revealed that the young modulus increase from 3.2 MPa to 4.4 MPa during the imprinting process. However, bpM presents a lowest elongation capacity than bare membrane (bM) (1076 to 444 %, respectively) due to the heterogeneous thickness induced by the topography. The selected topography revealed to promote a positive bioresponse, depicted by the improvement of the cellular behaviour and different organization. This promising strategy revealed that circumventing the traditional topographies by nature mimetic topographies is fundamental for the development of innovative bioresponsive substrates that can tune cellular behaviour in TE strategies.

Reproducing the Biomechanical Environment of the Chondrocyte for Cartilage Tissue Engineering.

It is well known that the biomechanical and tribological performance of articular cartilage is inextricably linked to its extracellular matrix (ECM) structure and zonal heterogeneity. Furthermore, it is understood that the presence of native ECM components, such as collagen II and aggrecan, promote healthy homeostasis in the resident chondrocytes. What is less frequently discussed is how chondrocyte metabolism is related to the extracellular mechanical environment, at both the macro and microscale. The chondrocyte is in immediate contact with the pericellular matrix of the chondron, which acts as a mechanocoupler, transmitting external applied loads from the ECM to the chondrocyte. Therefore, components of the pericellular matrix also play essential roles in chondrocyte mechanotransduction and metabolism. Recreating the biomechanical environment through tuning material properties of a scaffold and/or the use of external cyclic loading can induce biosynthetic responses in chondrocytes. Decellularized scaffolds, which retain the native tissue macro- and microstructure also represent an effective means of recapitulating such an environment. The use of such techniques in tissue engineering applications can ensure the regeneration of skeletally mature articular cartilage with appropriate biomechanical and tribological properties to restore joint function. Despite the pivotal role in graft maturation and performance, biomechanical and tribological properties of such interventions is often underrepresented. This review outlines the role of biomechanics in relation to native cartilage performance and chondrocyte metabolism, and how application of this theory can enhance the future development and successful translation of biomechanically relevant tissue engineering interventions. Impact statement Physiological cartilage function is a key criterion in the success of a cartilage tissue engineering solution. The in situ performance is dependent on the initial scaffold design as well as extracellular matrix deposition by endogenous or exogenous cells. Both biological and biomechanical stimuli serve as key regulators of cartilage homeostasis and maturation of the resulting tissue-engineered graft. An improved understanding of the influence of biomechanics on cellular function and consideration of the final biomechanical and tribological performance will help in the successful development and translation of tissue-engineered grafts to restore natural joint function postcartilage trauma or osteoarthritic degeneration, delaying the requirement for prosthetic intervention.

3D bioprinting of liver spheroids derived from human induced pluripotent stem cells sustain liver function and viability in vitro

The liver is responsible for many metabolic, endocrine and exocrine functions. Approximately 2 million deaths per year are associated with liver failure. Modern 3D bioprinting technologies allied with autologous induced pluripotent stem cells (iPS)-derived grafts could represent a relevant tissue engineering approach to treat end stage liver disease patients. However, protocols that accurately recapitulates liver’s epithelial parenchyma through bioprinting are still underdeveloped. Here we evaluated the impacts of using single cell dispersion (i.e. obtained from conventional bidimensional differentiation) of iPS-derived parenchymal (i.e. hepatocyte-like cells) versus using iPS-derived hepatocyte-like cells spheroids (i.e. three-dimensional cell culture), both in combination with non-parenchymal cells (e.g. mesenchymal and endothelial cells), into final liver tissue functionality. Single cell constructs showed reduced cell survival and hepatic function and unbalanced protein/amino acid metabolism when compared to spheroid printed constructs after 18 days in culture. In addition, single cell printed constructs revealed epithelial-mesenchymal transition, resulting in rapid loss of hepatocyte phenotype. These results indicates the advantage of using spheroid-based bioprinting, contributing to improve current liver bioprinting technology towards future regenerative medicine applications and liver physiology and disease modeling.

Osteogenic potential of heterogeneous and CD271-enriched mesenchymal stromal cells cultured on apatite-wollastonite 3D scaffolds

BackgroundMesenchymal stromal cells (MSCs) are widely used in clinical trials for bone repair and regeneration. Despite previous evidence showing a prominent osteogenic potential of 2D cultured CD271 enriched MSCs, the osteogenic potential of CD271 enriched cells cultured on 3D scaffold is unknown. Apatite-wollastonite glass ceramic (A-W) is an osteoconductive biomaterial shown to be compatible with MSCs. This is the first study comparing the attachment, growth kinetics, and osteogenic potential of two MSC populations, namely heterogeneous plastic adherence MSCs (PA-MSCs) and CD271-enriched MSCs (CD271-MSCs), when cultured on A-W 3D scaffold.ResultsThe paired MSC populations were assessed for their attachment, growth kinetics and ALP activity using confocal and scanning electron microscopy and the quantifications of DNA contents and p-nitrophenyl (pNP) production respectively. While the PA-MSCs and CD271-MSCs had similar expansion and tri-lineage differentiation capacity during standard 2D culture, they showed different proliferation kinetics when seeded on the A-W scaffolds. PA-MSCs displayed a well-spread attachment with more elongated morphology compared to CD271-MSCs, signifying a different level of interaction between the cell populations and the scaffold surface. Following scaffold seeding PA-MSCs fully integrated into the scaffold surface and showed a stronger propensity for osteogenic differentiation as indicated by higher ALP activity than CD271-MSCs. Furthermore, A-W scaffold seeded uncultured non-enriched bone marrow mononuclear cells also demonstrated a higher proliferation rate and greater ALP activity compared to their CD271-enriched counterpart.ConclusionsOur findings suggest that CD271-positive enrichment of a population is not beneficial for osteogenesis when the cells are seeded on A-W scaffold. Furthermore, unselected heterogeneous MSCs or BM-MNCs are more promising for A-W scaffold based bone regeneration. This leads to a conclusion of broader clinical relevance for tissue engineering: on the basis of our observations here the osteogenic potential observed in 2D cell culture should not be considered indicative of likely performance in a 3D scaffold based system, even when one of the cell populations is effectively a subset of the other.

Embedding magnesium metallic particles in polycaprolactone nanofiber mesh improves applicability for biomedical applications

Magnesium (Mg) metal is of great interest in biomedical applications, especially in tissue engineering. Mg exhibits excellent in vivo biocompatibility, biodegradability and, during degradation, releases Mg ions (Mg2+) with the potential to improve tissue repair. We used electrospinning technology to incorporate Mg particles into nanofibers. Various ratios of Mg metal microparticles (<44 µm diameter) were incorporated into nanofiber polycaprolactone (PCL) meshes. Physicochemical properties of the meshes were analyzed by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), mechanical tensile testing, X-ray diffractometry and UV–VIS spectrophotometry. Biological properties of meshes were evaluated in vitro and in vivo. Under mammalian cell culture conditions, Mg-containing meshes released hydrogen gas and relative amounts of free Mg2+ that reflected the Mg/PCL ratios. All meshes were non-cytotoxic for 3T3 fibroblasts and PC-12 pheochromocytoma cells. In vivo implantation under the skin of mice for 3, 8 and 28 days showed that Mg-containing meshes were well vascularized, with improved measures of inflammation and healing compared to meshes without Mg. Evidence included an earlier appearance and infiltration of tissue repairing macrophages and, after 28 days, evidence of more mature tissue remodeling. Thus, these new composite nanofiber meshes have promising material properties that mitigated inflammatory tissue responses to PCL alone and improved tissue healing, thus providing a suitable matrix for use in clinically relevant tissue engineering applications. Statement of SignificanceThe biodegradable metal, magnesium, safely biodegrades in the body, releasing beneficial byproducts. To improve tissue delivery, magnesium metal particles were incorporated into electrospun nanofiber meshes composed of a biodegradable, biocompatible polymer, polycaprolactone (PCL). Magnesium addition, at several concentrations, did not alter PCL chemistry, but did alter physical properties. Under cell culture conditions, meshes released magnesium ions and hydrogen gas and were not cytotoxic for two cell types. After implantation in mice, the mesh with magnesium resulted in earlier appearance of M2-like, reparative macrophages and improved tissue healing versus mesh alone. This is in agreement with other studies showing beneficial effects of magnesium metal and provides a new type of scaffold material that will be useful in clinically relevant tissue engineering applications.

An Overview of the Tissue Engineering Market in the United States from 2011 to 2018.

This report seeks to provide an update of the current landscape of the tissue engineering market in the United States from an unbiased point of view by analyzing the financial reports provided by tissue engineering companies, as well as data from publicly available clinical trials with relevant tissue engineering applications.

Decellularized Swine Dental Pulp Tissue for Regenerative Root Canal Therapy

In the current theme of dental pulp regeneration, biological and synthetic scaffolds are becoming a potential therapy for pulp revitalization. The goal is to provide a suitable environment for cellular infiltration, proliferation, and differentiation. The extracellular matrix (ECM) represents a natural scaffold material resembling the native tissue chemical and mechanical properties. In the past few years, ECM-based scaffolds have shown promising results in terms of progenitor cells recruitment, promotion of constructive remodeling, and modulation of host response. These properties make ECM-derived scaffolds an ideal candidate for pulp regenerative therapy. Development of strategies for clinically relevant tissue engineering using dental pulp extracellular matrix (DP-ECM) can provide an alternative to conventional root canal treatment. In this work, we successfully decellularized ECM derived from porcine dental pulp. The resulting scaffold was characterized using immunostaining (collagen type I, dentin matrix protein 1, dentin sialoprotein, and Von Willebrand factor) and enzyme-linked immunosorbent assay (transforming growth factor β, vascular endothelial growth factor, and basic fibroblast growth factor) for extracellular proteins where the ECM retained its proteins and significant amount of growth factors. Furthermore, a pilot in vivo study was conducted where the matrix was implanted for 8 wk in a dog root canal model. Our in vitro and preliminary in vivo data show that the decellularized ECM supports cellular infiltration together with the expression of pulp-dentin and vascular markers (DSP and CD31) compared to the controls. Herein, we show the feasibility to produce a decellularized ECM scaffold and validate the concept of using ECM-based scaffolds for pulp regeneration.

CPT1C promotes human mesenchymal stem cells survival under glucose deprivation through the modulation of autophagy

Human mesenchymal stem cells (hMSCs) are widely used in regenerative medicine. In some applications, they must survive under low nutrient conditions engendered by avascularity. Strategies to improve hMSCs survival may be of high relevance in tissue engineering. Carnitine palmitoyltransferase 1 C (CPT1C) is a pseudoenzyme exclusively expressed in neurons and cancer cells. In the present study, we show that CPT1C is also expressed in hMSCs and protects them against glucose starvation, glycolysis inhibition, and oxygen/glucose deprivation. CPT1C overexpression in hMSCs did not increase fatty acid oxidation capacity, indicating that the role of CPT1C in these cells is different from that described in tumor cells. The increased survival of CPT1C-overexpressing hMSCs observed during glucose deficiency was found to be the result of autophagy enhancement, leading to a greater number of lipid droplets and increased intracellular ATP levels. In fact, inhibition of autophagy or lipolysis was observed to completely block the protective effects of CPT1C. Our results indicate that CPT1C-mediated autophagy enhancement in glucose deprivation conditions allows a greater availability of lipids to be used as fuel substrate for ATP generation, revealing a new role of CPT1C in stem cell adaptation to low nutrient environments.

Dynamic Mechanical Compression of Chondrocytes for Tissue Engineering: A Critical Review.

Articular cartilage functions to transmit and translate loads. In a classical structure–function relationship, the tissue resides in a dynamic mechanical environment that drives the formation of a highly organized tissue architecture suited to its biomechanical role. The dynamic mechanical environment includes multiaxial compressive and shear strains as well as hydrostatic and osmotic pressures. As the mechanical environment is known to modulate cell fate and influence tissue development toward a defined architecture in situ, dynamic mechanical loading has been hypothesized to induce the structure–function relationship during attempts at in vitro regeneration of articular cartilage. Researchers have designed increasingly sophisticated bioreactors with dynamic mechanical regimes, but the response of chondrocytes to dynamic compression and shear loading remains poorly characterized due to wide variation in study design, system variables, and outcome measurements. We assessed the literature pertaining to the use of dynamic compressive bioreactors for in vitro generation of cartilaginous tissue from primary and expanded chondrocytes. We used specific search terms to identify relevant publications from the PubMed database and manually sorted the data. It was very challenging to find consensus between studies because of species, age, cell source, and culture differences, coupled with the many loading regimes and the types of analyses used. Early studies that evaluated the response of primary bovine chondrocytes within hydrogels, and that employed dynamic single-axis compression with physiologic loading parameters, reported consistently favorable responses at the tissue level, with upregulation of biochemical synthesis and biomechanical properties. However, they rarely assessed the cellular response with gene expression or mechanotransduction pathway analyses. Later studies that employed increasingly sophisticated biomaterial-based systems, cells derived from different species, and complex loading regimes, did not necessarily corroborate prior positive results. These studies report positive results with respect to very specific conditions for cellular responses to dynamic load but fail to consistently achieve significant positive changes in relevant tissue engineering parameters, particularly collagen content and stiffness. There is a need for standardized methods and analyses of dynamic mechanical loading systems to guide the field of tissue engineering toward building cartilaginous implants that meet the goal of regenerating articular cartilage.

Neutrophil-mediated enhancement of angiogenesis and osteogenesis in a novel triple cell co-culture model with endothelial cells and osteoblasts.

Repair and regeneration of critical-sized bone defects remain a major challenge in orthopaedic and craniomaxillofacial surgery. Until now, attempts to bioengineer bone tissue have been hindered by the inability to establish proper angiogenesis and osteogenesis in the tissue construct. In the present study, we established a novel triple cell co-culture model consisting of osteoblasts, endothelial cells, and neutrophils and conducted a systematic investigation of the effects of neutrophils on angiogenesis and osteogenesis. Neutrophils significantly increased angiogenesis in the tissue construct, evidenced by the formation of microvessel-like structures with an extensive lattice-like, stable tubular network in the co-culture model. Moreover, neutrophils significantly induced the expression of pro-angiogenic markers, such as VEGF-A, CD34, EGF, and FGF-2 in a dose- and time-dependent manner. Subsequently, PCR arrays corroborated that neutrophils upregulate the important angiogenic markers and MMPs. Moreover, neutrophils also enhanced osteogenic markers, such as ALP, OCN, OPN, and COL-1 compared with the controls. As shown by the osteogenic gene arrays, neutrophils significantly regulated major osteogenic markers such as BMP2, BMP3, BMP4, BMP5, TGF-β2, RUNX2, and ECM proteins. Significantly higher mineralization was observed in triple cell co-culture compared with controls. Foregoing data indicate that the triple cell co-culture model can be used to stimulate the growth of microvasculature within a bone bioengineering construct to improve cell viability. Neutrophil-mediated enhancement of angiogenesis and osteogenesis could be a viable, clinically relevant tissue engineering strategy to obtain optimal bone growth in defect sites, in the field of oral and maxillofacial surgery.

The effect of terminal sterilization on structural and biophysical properties of a decellularized collagen-based scaffold; implications for stem cell adhesion.

Terminal sterilization induces physical and chemical changes in the extracellular matrix (ECM) of ex vivo-derived biomaterials due to their aggressive mechanism of action. Prior studies have focused on how sterilization affects the mechanical integrity of tissue-based biomaterials but have rarely characterized effects on early cellular interaction, which is indicative of the biological response. Using a model fibrocartilage disc scaffold, these investigations compare the effect of three common sterilization methods [peracetic acid (PAA), gamma irradiation (GI), and ethylene oxide (EtO)] on a range of material properties and characterized early cellular interactions. GI and EtO produced unfavorable structural damage that contributed to inferior cell adhesion. Conversely, exposure to PAA resulted in limited structural alterations while inducing chemical modifications that favored cell attachment. Results suggest that the sterilization approach can be selected to modulate biomaterial properties to favor cellular adhesion and has relevance in tissue engineering and regenerative medicine applications. Furthermore, the study of cellular interactions with modified biomaterials in vitro provides information of how materials may react in subsequent clinical applications.

Regulation of miRNA during direct reprogramming of dental pulp cells to insulin-producing cells

To further evaluate the multipotency of dental pulp cells, and to investigate the possible direct reprogramming of these cells, we examined their in vitro induction of direct conversion to an endocrine cell lineage. In vitro induction was carried out using similar conditions to those reported for regulating the differentiation of undifferentiated intestinal cells into endocrine progenitor cells. Specifically, the transcription factors Pdx1 and Neurog3 were transfected into rat dental pulp cells to induce their direct conversion to endocrine lineage cells. The degree of induction was evaluated by detecting insulin-producing cells. Using a miRCURY LNA microRNA Array (Exiqon), the miRNA expression profiles were comprehensively analyzed. At 10days after induction, insulin-producing cells were detected. Based on the expression profiles, eight miRNA probes showing significant differences at 10days after induction compared with their pre-induction baseline values were extracted after filtering. Notably, miR-183 was downregulated by less than 40% after induction. Following a target scan of miR-183, we identified 242 conserved targets, including molecules crucial for the development of pancreatic beta-cells such as Foxo1. These findings indicate that dental pulp cells have potential for direct reprogramming to insulin-producing cells. This potential ability for direct reprogramming of dental pulp cells shows promise for clinically relevant tissue engineering materials.

Transcriptional Regulatory Cascades in Runx2-Dependent Bone Development

The development of the musculoskeletal system is a complex process that involves very precise control of bone formation and growth as well as remodeling during postnatal life. Although the understanding of the transcriptional mechanisms of osteogenesis has increased considerably, the molecular regulatory basis, especially the gene regulatory network of osteogenic differentiation, is still poorly understood. This review provides the reader with an overview of the key transcription factors that govern bone formation, highlighting their function and regulation linked to Runt-related transcription factor 2 (Runx2). Runx2 as the master transcription factor of osteoblast differentiation, Twist, Msh homeobox 2 (Msx2), and promyelocytic leukemia zinc-finger protein (PLZF) acting upstream of Runx2, Osterix (Osx) acting downstream of Runx2, and activating transcription factor 4 (ATF4) and zinc-finger protein 521 (ZFP521) acting as cofactors of Runx2 are discussed, and their relevance for tissue engineering is presented. References are provided for more in-depth personal study.

Current opinion on auricular reconstruction

To review the current practice in the field of auricular reconstruction and to highlight the recent advances reported in the medical literature. The majority of surgeons who perform auricular reconstruction continue to employ the well-established techniques developed by Brent and Nagata. Surgery takes between two and four stages, with the initial stage being construction of a framework of autogenous rib cartilage which is implanted into a subcutaneous pocket. Several modifications of these techniques have been reported. More recently, synthetic frameworks have been employed instead of autogenous rib cartilage. For this procedure, the implant is generally covered with a temporoparietal flap and a skin graft at the first stage of surgery. Tissue engineering is a rapidly developing field, and there have been several articles related to the field of auricular reconstruction. These show great potential to offer a solution to the challenge associated with construction of a viable autogenous cartilage framework, whilst avoiding donor-site morbidity. This article gives an overview of the current practice in the field of auricular reconstruction and summarizes the recent surgical developments and relevant tissue engineering research.

Biocompatible Poly(L‐lactide)/MWCNT Nanocomposites: Morphological Characterization, Electrical Properties, and Stem Cell Interaction

The promising perspectives of PLLA-based nanostructured biomaterials and their relevance in tissue engineering are reported. Nanocomposites based on PLLA and MWCNTs are developed with an MWCNT content ranging from 0 to 3 wt%. The electrical properties show a percolation threshold within a range of 0.21-0.33 wt% MWCNTs, and the conductivity increases by six orders of magnitude. The surface structure shows changes with the carbon nanotube concentration. The functional role of MWCNTs incorporation in terms of interactions with adult stem cells suggests that PLLA/MWCNT nanocomposites are suitable substrates for primary stem cell culture.

Variation in Tissue Outcome of Ovine and Human Engineered Heart Valve Constructs: Relevance for Tissue Engineering

Clinical application of tissue engineered heart valves requires precise control of the tissue culture process to predict tissue composition and mechanical properties prior to implantation, and to understand the variation in tissue outcome. To this end we investigated cellular phenotype and tissue properties of ovine (n = 8) and human (n = 7) tissue engineered heart valve constructs to quantify variations in tissue outcome within species, study the differences between species and determine possible indicators of tissue outcome. Tissue constructs consisted of polyglycolic acid/poly-4-hydroxybutyrate scaffolds, seeded with myofibroblasts obtained from the jugular vein (sheep) or the saphenous vein (from humans undergoing cardiac surgery) and cultured under static conditions. Prior to seeding, protein expression of α-smooth muscle actin, vimentin, nonmuscle myosin heavy chain and heat shock protein 47 were determined to identify differences at an early stage of the tissue engineering process. After 4 weeks of culture, tissue composition and mechanical properties were quantified as indicators of tissue outcome. After 4 weeks of tissue culture, tissue properties of all ovine constructs were comparable, while there was a larger variation in the properties of the human constructs, especially the elastic modulus and collagen content. In addition, ovine constructs differed in composition from the human constructs. An increased number of α-smooth muscle actin-positive cells before seeding was correlated with the collagen content in the engineered heart valve constructs. Moreover, tissue stiffness increased with increasing collagen content. The results suggest that the culture process of ovine tissues can be controlled, whereas the mechanical properties, and hence functionality, of tissues originating from human material are more difficult to control. On-line evaluation of tissue properties during culture or more early cellular markers to predict the properties of autologous tissues cultured for individual patients are, therefore, of utmost importance for future clinical application of autologous heart valve tissue engineering. As an example, this study shows that α-smooth muscle actin might be an indicator of tissue mechanical properties.

Comparably accelerated vascularization by preincorporation of aortic fragments and mesenchymal stem cells in implanted tissue engineering constructs

The demanding need for tissue replacement resulted in manifold approaches for the construction of different tissues. One common problem which hampers the clinical usage of tissue engineering constructs is a limited vascularization. In an attempt to accelerate the vascularization of tissue engineering constructs we compared the usage of bone marrow mesenchymal stem cells (bmMSCs) and fragments derived from the aorta in vivo. Tissue engineering constructs composed of PLGA scaffolds containing Matrigel (n = 8), aortic fragments embedded in Matrigel (n = 8), bmMSCs embedded in Matrigel (n = 8), and aortic fragments embedded in Matrigel combined with bmMSCs (n = 8) were implanted into dorsal skinfold chambers of balb/c mice and analyzed repetitively over 14 days. In all groups a weak inflammatory response was transiently apparent. Vascularization was significantly (p = 0.05) accelerated in bmMSC and aortic fragments containing constructs compared with Matrigel alone, demonstrated by a distinctly increased microvascular density throughout the whole experiment. The combination of bmMSCs and aortic fragments showed no additional effect compared with bmMSCs and aortic fragments alone. The accelerated vascularization and microvascular density of tissue engineering constructs triggered by bmMSCs and aortic fragments is comparable. Thus aortic fragments provide a new promising source for clinical relevant tissue engineering constructs.