Release Of Carotenoids Research Articles

Spinning gold: Unraveling the bioaccessibility and bioavailability of Pitanga’s carotenoid microfibers

The design and development of nanoparticle- and microparticle-based delivery systems incorporating carotenoids into carrier materials offers multiple advantages, including enhancing the bio-efficacy of these compounds due to improving their bioaccessibility and bioavailability. This study introduced pitanga saponified carotenoid extract (PSCE) and pitanga non-saponified carotenoid extract (PSCE) in a 12 % zein/1 %PEO solution and electrospun for fiber production. Then, the fibers were characterized, and their bioaccessibility and bioavailability were also evaluated. The average mean diameter of carotenoid non-saponified microfiber (CNSM) and saponified (CSM) was 5.76 ± 1.7 μm and 4.92 ± 1.4 μm, respectively, indicating that the saponification process reduces the viscosity of the solution resulting in the development of finer microfibers. Carotenoid encapsulation efficiency ranged between 10.3 % and 8.43 % for saponified and non-saponified extracts, respectively. Surprisingly, no carotenoid release was detected from both microfibers after 72 h. Carotenoid bioaccessibility was higher in pitanga pulp compared to both microfibers. The xanthophylls showed higher bioavailability in pitanga pulp. The study’s results suggest that the microfibers’ structure significantly influenced carotenoid release and cellular absorption more than the chemical structure of carotenoids themselves.

Physical and Functional Properties of Poly (Lactic Acid)/Paprika Oleoresin Films for Food Packaging Application

Background: Paprika oleoresin is a compound extracted from paprika, with functional properties, mainly due to its fatty acid composition and carotenoid profile. The effect of these compounds on PLA composite films has not been investigated. Objective: The objective of this study is to evaluate the effect of paprika oleoresin at different concentrations on the surface color, UV barrier, mechanical barrier, water vapor barrier, hydrophobicity, paprika oleoresin release and antibacterial properties of PLA-based composite films. Method: Functional poly(lactic acid)-based films incorporating paprika oleoresin extract (POE) at three levels (0.01%, 0.03% and 0.06%) were prepared using a solution casting method. Results: The paprika oleoresin showed an excellent compatibility with the PLA, as a uniform dispersion was observed. Moreover, the addition of POE improved properties such as elasticity (increase of 62%) and water vapor permeability (decrease of 69%). However, compared to the control film (polylactic acid), the solubility of the polylactic acid and paprika oleoresin extract films was found to be significantly increased. As the POE content increased, the color intensity of the PLA films became lighter orange-yellow. The film composed by PLA/ POE (0.06%) also presented significant bacterial inhibition for Staphylococcus aureus. In addition, the films demonstrated total carotenoid release in food-simulating liquids. Conclusion: Functional PLA/POE films can be a good alternative to replace traditional food packaging.

Effect of ohmic heating on the extraction of biocompounds from aqueous and ethanolic suspensions of Pavlova gyrans

Electric field technology has been highlighted as a promising strategy in the permeabilization of cell membranes and the corresponding bioactive release. In this work, aqueous and ethanolic suspensions of Pavlova gyrans were subjected to moderate electric fields (MEF) to promote rapid heating due to Ohmic Heating (OH) effect. Two approaches were tested: i) OH assisted extraction in a temperature range between 25 ºC and 85 ºC, and ii) OH pretreatment at 25 ºC and 55 ºC followed by solvent extraction. OH treatment at 55 ºC (performed in less than 10 s) in aqueous suspensions promoted a marked increase in the release of organic matter (2.1-fold), chlorophyll a (41.1-fold) and total carotenoids (56.6-fold) when compared to the freeze-thaw cycles (FTC ≈ 3 hours). OH-pretreated biomass subjected to a two-step passive extraction improved the release of proteins and chlorophylls over incubation (p < 0.05) when compared to untreated biomass. This procedure increased 2.2-, 3.9- and 31.9-fold the content of organic matter, protein and chlorophyll a, respectively, in comparison to the FTC procedure. This work presented the OH effect as a promising strategy for enhanced disruption and release of intracellular microalgae compounds.

Effect of Novel Processing Techniques on the Carotenoid Release during the Production of Red Guava Juice.

Red guava, distinguished by its elevated lycopene content, emerges as a promising natural source of carotenoids. This study systematically evaluates the impact of diverse processing techniques on the efficient release of carotenoids. The primary objective is to facilitate the transfer of carotenoids into the juice fraction, yielding carotenoid-enriched juice seamlessly integrable into aqueous-based food matrices. The untreated guava puree exhibited a modest release of carotenoids, with only 66.26% of β-carotene and 57.08% of lycopene reaching the juice. Contrastly, both high-pressure homogenization (HPH) at 25 MPa and enzyme (EM) treatment significantly enhanced carotenoid release efficiency (p < 0.05), while high hydrostatic pressure (HHP) at 400 MPa and pulsed electric field (PEF) of 4 kV/cm did not (p > 0.05). Notably, HPH demonstrated the most substantial release effect, with β-carotene and lycopene reaching 90.78% and 73.85%, respectively. However, the stability of EM-treated samples was relatively poor, evident in a zeta-potential value of -6.51 mV observed in the juice. Correlation analysis highlighted the interactions between pectin and carotenoids likely a key factor influencing the stable dissolution or dispersion of carotenoids in the aqueous phase. The findings underscore HPH as a potent tool for obtaining carotenoid-enriched guava juice, positioning it as a desirable ingredient for clean-label foods.

Structure-property relationship of pea protein fibrils in stabilization of HIPEs and the encapsulation, protection, controlled release and oral delivery of carotenoids for alleviating intestinal inflammation.

Increasing attentions are paid to high internal phase emulsions (HIPEs) due to their unique properties. In this study, pea protein-based fibrils were used as emulsifier to stabilize HIPEs. We demonstrated that the molecular assembly pathway and interfacial behavior of pea protein-based fibrils are affected by ionic strength. And the increased abundance of highly flexible worm-like nanofibrils facilitated their adsorption and packing on oil droplets, resulting in improved emulsion properties to stabilize the HIPEs with the internal phase volume fraction as high as 90%. Based on this, high loading content of carotenoids up to 0.05 wt% in the prepared HIPEs, protection of their stability against heating, UV and iron ions, and significantly increased bio-accessibilities of the carotenoids were realized. Animal studies using a mouse model of DSS-induced colitis revealed that carotenoid loaded HIPEs can alleviate the colon injury, by downregulating the expression of inflammatory cytokines, and promoting intestinal barrier function. This work will deepen the understanding of the formation of pea protein fibrils and provide a reference for the rational use of carotenoid loaded HIPEs in IBD management.

Kernel properties related to carotenoid release during in vitro gastrointestinal digestion in commercial dent maize hybrids

The objective of study was to investigate the relationships between maize kernel properties and carotenoid release during simulated gastrointestinal digestion of 103 hybrids of dent type. Commercial maize hybrids significantly differed in kernel hardness, chemical composition and carotenoid profile. Across all hybrids, the amount of digestible individual carotenoids increased as follows: β-carotene < α-cryptoxanthin < β-cryptoxanthin < lutein < zeaxanthin. The amount of digested carotenoids correlated negatively with amylose content and amylose-to-amylopectin ratio, while it correlated positively with the content of neutral detergent fibres and amylopectin as well as the Stenvert index. However, the content of endosperm lipids could not be related to carotenoid digestibility. Findings clearly indicate that the carotenoid release from the kernel during digestion is related to specific physical and chemical properties, leading to a better understanding of the effects of kernel matrix structure on carotenoid digestibility in dent-type maize hybrids.

Strategies for Recovery, Purification and Quantification of Torularhodin Produced by Rhodotorula mucilaginosa Using Different Carbon Sources

Torularhodin is a fungus-derived carotenoid, and the lack of downstream processing of torularhodin is still a challenge for its large-scale production. To support the industrial production of torularhodin, this work initially evaluated the efficiency of carotenoid release from Rhodotorula mucilaginosa using thermal acid treatment, saponification and ultrasound-assisted enzymatic lysis. Based on the polarity, torularhodin was then purified using methanol/acetone/hexane (2/2/1, v/v/v) solution eluting from a silica cartridge. Thermal acid treatment was considered the most appropriate method for total carotenoid release and torularhodin recovery. The highest carotenoid content was 121.3 ± 7.0 μg/g dry cell weight and 63.0 ± 6.1% of torularhodin (50.5 ± 3.0 μg/g dry cell weight in total) was recovered after purification. To fast quantify the content of torularhodin extracted from yeast, the absorption coefficient (E1cm1% = 3342) of torularhodin dissolved in chloroform was assayed. With the developed strategy for torularhodin recovery, purification and quantification, the potential of this yeast to produce torularhodin using xylose and glycerol was further evaluated. It was found that carbon sources may influence the proportion of carotenoids in this yeast, but torularhodin was still the dominant pigment. The results obtained in this study identified the feasibility of sustainable production of torularhodin from Rhodotorula mucilaginosa with high efficiency and purity.

Mechanical processing of Phaeodactylum tricornutum and Tetraselmis chui biomass affects phenolic and antioxidant compound availability, nutrient digestibility and deposition of carotenoids in Atlantic salmon

Cell walls of microalgae differ both in terms of chemical composition and architecture. Certain characteristics of cell walls limit both the effectiveness of extraction of valuable constituents and nutrient bioavailability and bioaccessibility in fish. We first investigated the potential of bead milling to disrupt cell walls to improve extractability of bioactive compounds from Phaeodactylum tricornutum and Tetraselmis chui. We also evaluated the effect of the mechanical treatment on i) digestibility of nutrients in the two microalgae and ii) fatty acid and pigment content of fillet of Atlantic salmon fed the algae diets.Cell wall disruption facilitated efficient release of total phenolic compounds (TPC), chlorophyll A, chlorophyll B and total carotenoids from both microalgae species, but increased only the total antioxidant capacity (TAC) of T. chuii. The polyphenol profile varied between the two species; we identified 2 and 6 polyphenols from P. tricornutum and T. chui, respectively.For the feeding experiment, microalgae biomass, intact or cell wall disrupted (90.7 and 76.4% disruption degree for T. chui and P. tricornutum, respectively), were mixed with the other feed ingredients. Atlantic salmon (315 g start weight / 55 fish per tank) were fed one of the five extruded experimental diets (a fishmeal-based reference diet and four feeds with 30% of the whole or broken microalgae biomass added to the reference diet). The digestibility of protein in the P. tricornutum was significantly higher compared to that of T. chui. Breaking the cell walls by bead milling caused a significant improvement in digestibility of protein in T. chui. The apparent digestibility coefficient of lipid was higher in P. tricornutum and bead milling improved the digestibility of the two algae. However, bead milling did not favourably change the fatty acid profile of Atlantic salmon. At the end of the feeding trial, P. tricornutum-fed fish had significantly improved pigmentation, probably due to the higher content of fucoxanthin and fucoxanthinol compared to the fish fed the reference diet. The main conclusion from the mechanical processing of the microalgae is that bead milling can increase i) the extractability of polyphenols and pigments, ii) the digestibility of lipid in both algae while the effect on protein was improved only for T. chui. Furthermore, P. tricornutum can be considered a natural pigment source in the feeds of Atlantic salmon.

Effects of different processed tomatoes on carotenoid release and microbiota composition during in vitro gastrointestinal digestion and colonic fermentation.

Carotenoids in tomatoes confer significant health benefits to humans but with the disadvantage of the carotenoids from raw tomatoes not being easily absorbed for utilization. Thus, this study aimed to investigate the effects of different cooking processes on carotenoid release and human gut microbiota composition during in vitro simulated gastrointestinal digestion of tomatoes. The results showed that stir-frying significantly increased the release of lycopene and β-carotene during gastrointestinal digestion, with boiling being the second most effective treatment. The boiling-treated tomatoes enhanced the carotenoid release during in vitro fermentation. Gut microbiota analysis revealed that the digestion of the raw and boiled tomatoes promoted the growth of potentially beneficial microbiota while reducing the ratio of Firmicutes/Bacteroides, which potentially helps prevent obesity. Boiling treatment significantly reduced the growth of Peptostreptococcus and was negatively correlated with carotenoid release. Overall, the boiling-treated tomatoes were more effective than the raw or stir-fried tomatoes in terms of both colon health benefits and carotenoid release.

Zein-Alginate-Phosphatidylcholine Nanocomplex Efficiently Delivers Lycopene and Lutein over Dietary-Derived Carotenoid Mixed Micelles in Caco-2 Cells.

This study evaluated the potency of zein-alginate-phosphatidylcholine nanoparticles (NPs) on bioaccessibility/intestinal uptake of encapsulated lycopene (LY) and lutein (LT) versus dietary absorption using simulated digestion and human intestinal Caco-2 cells. LY-zein-alginate-PC (LYZAP) and LT-zein-alginate-PC (LTZAP) NPs yield desired properties, which exhibit sustained release and are suitable for oral administration. Interestingly, co-treatment of LYZAP + LTZAP showed better release of carotenoids instead of individual treatment at intestinal pH. Bioaccessibility, cellular uptake, and basolateral secretion of LY and LT from NPs were significantly enhanced than micellar carotenoids (dietary mode of absorption). The increased absorption of carotenoids from NPs correlated with triglyceride levels. The intestinal cell uptake of carotenoids by nanoencapsulation may be due to endocytosis, paracellular, and SRB-1 protein-mediated transport. Overall, LYZAP and LTZAP NPs possess superior properties to control the release and cellular uptake of unique or distinct carotenoids. The inclusion of alginate and phosphatidylcholine in zein-based nanoencapsulation could be a promising strategy to improve carotenoid bioavailability.

Combination of Spray-Chilling and Spray-Drying Techniques to Protect Carotenoid-Rich Extracts from Pumpkin (Cucurbita moschata) Byproducts, Aiming at the Production of a Powdered Natural Food Dye.

Reducing waste, using byproducts, and natural food additives are important sustainability trends. In this context, the aim of this study was to produce and evaluate a natural food dye, extracted from pumpkin byproducts, powdered and protected by spray-chilling (SC) and a combination of spray-drying and spray-chilling techniques (SDC). The extract was obtained using ethanol as solvent; vegetable fat and gum Arabic were used as carriers. Formulations were prepared with the following core:carrier ratios: SC 20 (20:80), SC 30 (30:70), SC 40 (40:60), SDC 5 (5:95), SDC 10 (10:90), and SDC 15 (15:85). The physicochemical properties of the formed microparticles were characterised, and their storage stability was evaluated over 90 days. The microparticles exhibited colour variation and size increase over time. SDC particles exhibited the highest encapsulation efficiency (95.2-100.8%) and retention of carotenoids in the storage period (60.8-89.7%). Considering the carotenoid content and its stability, the optimal formulation for each process was selected for further analysis. All of the processes and formulations produced spherical particles that were heterogeneous in size. SDC particles exhibited the highest oxidative stability index and the highest carotenoid release in the intestinal phase (32.6%). The use of combined microencapsulation technologies should be considered promising to protect carotenoid compounds.

A guide for the evaluation of in vitro bioaccessibility of carotenoids.

Ongoing efforts to improve the nutritional content of carotenoids in food sources to solve global health problems must also consider bioaccessibility and bioavailability of carotenoids. Carotenoid bioaccessibility encompasses carotenoid release from the food matrix, solubilization in lipid emulsion droplets, and transfer to mixed micelles for further absorption into the intestine. Bioavailability refers to the fraction of carotenoids which enters into circulation. To understand the mechanisms controlling bioaccessibility, in vitro digestion methods have been developed and are a useful approach to overcome some of the disadvantages associated with in vivo protocols. The INFOGEST protocol comprises three phases (oral, gastric and intestinal) to simulate adult human digestion of foods, as an international consensus for the conditions of static in vitro digestion. The last steps in any digestion protocol involve isolation of the target food compounds and subsequent analysis, steps not included in the INFOGEST protocol because they may differ depending on specific physical-chemical characteristics and quantification analysis of the target analyte. In this chapter, we describe the INFOGEST protocol which has been adapted for the analysis of carotenoid bioaccessibility, including determination and calculation of enzyme activities according to INFOGEST guidelines, removal of undigested material, collection of mixed micelles containing carotenoids, extraction, storage and subsequent identification and quantification by liquid chromatography analysis of both free and acylated carotenoids.

Whey Proteins Isolate-Based Biopolymeric Combinations to Microencapsulate Supercritical Fluid Extracted Oleoresins from Sea Buckthorn Pomace.

In this study, high-value, carotenoid-rich oleoresin obtained by supercritical carbon dioxide (SFE-CO2) extraction was used to develop five variants of microencapsulated delivery system, based on whey proteins isolate (WPI), in combination with inulin (I), pectin (P) or lactose (L). The WPI:I and WPI:L variants were also obtained by conjugation via Maillard reaction. The microencapsulation of the SFE-CO2 sea buckthorn pomace oleoresin was performed by emulsion, complex coacervation and freeze-drying, which allowed for the obtaining of five powders, with different phytochemicals profile. The WPI:I conjugate showed the highest level of total carotenoids, whereas the counterpart WPI:L showed the highest content in linoleic acid (46 ± 1 mg/g) and palmitoleic acid (20.0 ± 0.5 mg/g). The β-tocopherol and β-sitosterol were identified in all variants, with the highest content in the conjugated WPI:L variant. Both WPI:L and WPI:I conjugate samples presented similar IC50 value for inhibitory activity against pancreatic lipase and α-amylase; the highest activity was observed for the conjugated WPI:I. The WPI:P combination allowed the highest release of carotenoids in the gastro-intestinal environment. All the powders exhibited poor flowing properties, whereas water activity (aw) ranged from 0.084 ± 0.03 to 0.241 ± 0.003, suggesting that all variants are stable during storage. In case of solubility, significant differences were noticed between non-heated and glycated samples, with the highest value for the WPI:I and the lowest for glycated WPI:I. The structural analysis revealed the presence of finer spherosomes in WPI:I and WPI:L, with a reduced clustering capacity, whereas the particles in the conjugated samples were more uniform and aggregated into a three-dimensional network.

Effect of High Hydrostatic Pressure on the Extractability and Bioaccessibility of Carotenoids and Their Esters from Papaya (Carica papaya L.) and Its Impact on Tissue Microstructure.

High hydrostatic pressure (HHP) is a non-thermal technology widely used in the industry to extend food shelf-life and it has been proven to enhance the extractability of secondary metabolites, such as carotenoids, in plant foods. In this study, fresh-cut papaya pulp of varieties (Sweet Mary, Alicia and Eksotika) from the Canary Islands (Spain) were submitted to the HHP process (pressure: 100, 350 and 600 MPa; time: come-up time (CUT) and 5 min) to evaluate, for the first time, individual carotenoid and carotenoid ester extractability and to assess their bioaccessibility using an in vitro simulated gastrointestinal digestion assay, following the standardized INFOGEST® methodology. In addition, changes in papaya pulp microstructure after HHP treatments and during the different phases of the in vitro digestion were evaluated with optical light microscopy. HPLC-DAD (LC-MS/MS (APCI+)) analyses revealed that HHP treatments increased the carotenoid content, obtaining the highest extractability in pulp of the Sweet Mary papaya variety treated at 350 MPa during 5 min (4469 ± 124 μg/100 g fresh weight) which was an increase of 269% in respect to the HHP-untreated control sample. The highest carotenoid extraction value within each papaya variety among all HHP treatments was observed for (all-E)-lycopene, in a range of 98–1302 μg/100 g fresh weight (23–344%). Light micrographs of HHP-treated pulps showed many microstructural changes associated to carotenoid release related to the observed increase in their content. Carotenoids and carotenoid esters of papaya pulp submitted to in vitro digestion showed great stability; however, their bioaccessibility was very low due to the low content of fatty acids in papaya pulp necessary for the micellarization process. Further studies will be required to improve papaya carotenoid and carotenoid ester bioaccessibility.

Application of spray drying for production of microparticles containing the carotenoid-rich tucumã oil (Astrocaryum vulgare Mart.)

Tucumã oil contains high amounts of carotenoids, which present provitamin A and antioxidant properties, but its application in food products may be difficult due to hydrophobicity and susceptibility to degradation. The aim of this work was to produce tucumã oil powders by spray drying and to evaluate their physicochemical properties, storage stability and in vitro digestion. Different oil proportions (100, 200 and 300 g/kg) and drying temperatures (120 and 180 °C) were evaluated. Oxidative stability of oil and powders was evaluated by Rancimat at 120 °C, while carotenoid retention was determined during 125 days at 25 °C. Particles dried at 120 °C presented higher carotenoid contents (52.9–162.1 mg/kg) than that produced at 180 °C (43.7–130.6 mg/kg) and were chosen for further analysis. Encapsulation increased the oxidative stability (up to 177-fold) of oil under high temperature, besides allowing high carotenoid retention (73–85%) after storage, great dispersibility of oil in water (93.8–98.1%) and the controlled release of carotenoids during digestion steps, with an overall liberation of 64%. One may conclude that tucumã oil powders have potential to be incorporated into processed foods as a functional ingredient.

Effect of particle size distribution on the carotenoids release, physicochemical properties and 3D printing characteristics of carrot pulp

Carotenoids have many biological properties and their release from the matrix is most essential for human absorption. Particle size reduction of the matrix can lead to cell wall rupture, which promotes the release of carotenoids. However, changes of rheological property caused by particle size reduction are an important factor affecting 3D printing characteristics. The purpose of this study was to investigate the effect of particle size distribution on the carotenoids release, physicochemical properties and 3D printing characteristics of carrot pulp. The results showed that with the decrease of particle size, contents and release rates of carotenoids showed a trend of increase. Particle size reduction of carrot pulp increased apparent viscosity, G′, G’’, tan δ, 3D printing stability, cohesiveness and gumminess. Moreover, carrot pulp with smaller particle size showed higher printing performance, more uniform pore size distribution and more order microstructures. The study demonstrated that carotenoids release, physicochemical qualities and printing characteristics changed with different particle size distribution, and samples could be separated according to hierarchical clustering analysis of the index.

Processing Nannochloropsis gaditana biomass for the extraction of high-value biocompounds

Extraction of carotenoids and fatty acids from microalgae is a technological bottleneck in processing. An improved extraction process was developed to scale the production of these bioproducts from Nannochloropsis gaditana. Different cell disruption methods were evaluated in terms of carotenoid release. Ethanol was substituted with isopropyl alcohol in a three-component solution of water:isopropyl alcohol:hexane (WIH), in which the extracts were separated by solution partitioning. This resulted in higher carotenoid and fatty acid recovery yields if compared with the standard method. The extraction method was replicated on a pilot scale, obtaining similar carotenoid recovery yields, higher than those of the standard method. Although fatty acid recovery was lower than that of the small-scale tests, yields above 85% were obtained. This demonstrated that the method was scalable for the extraction of high-value products from microalgae up to 10-L reactor volume. The use of isopropyl alcohol, which is cheaper than ethanol, and the separation of the solution phases by partitioning (avoiding drying) could contribute to reduce operation costs of downstream processing.

Synergism of plant extract and vegetable oils-based lipid nanocarriers: Emerging trends in development of advanced cosmetic prototype products.

Phytochemicals are priceless sources of bioactive compounds with multiple health benefices. The main objective of the current investigation was to develop nanostructured herbal formulations conditioned as appropriate hydrogel (HG) conferring an enhanced transdermal absorption of bioactive compounds from selective extracts and vegetable oils. The direct impact of research is represented by the identification of prototype products which manifest an improved therapeutic response, by means of cumulative antioxidant, anti-inflammatory and anti-acne actions, without causing any side health effects. The combinatorial effect of Carrot Extract (CE) and Marigold Extract (ME) - Nanostructured Lipid Carriers (NLC) based on rosehip oil or black cumin oils was accompanied by a high biocompatibility and a significant ability to capture both short- and long-life free radicals. HG-NLC-ME-CE has been shown to be an efficient carrier with a differentiated potential for in vitro release of the two active principles, e.g. it delayed the release of carotenoids while the hydrophilic active (azelaic acid, AA) was faster released. The HG-NLC efficacy in skin inflammation treatment (demonstrated by in vitro and in vivo tests) revealed a reduced expression of inflammatory cytokines (IL-1β and TNF-α), more pronounced in the case of TNF-α. Moreover, a superior in vivo anti-inflammatory effect of HG-based NLC-CE/ME-AA as compared to that obtained for a commercial product was detected, i.e. after 3 h of HG-NLC treatment, a significant reduction of rat paw edema was quantified. In pre-clinical studies, the quantification of the hydration and elasticity effects in the viable epidermis provided the evidence of the high potential of developed prototypes, suitable for implementation in the market area. The degree of skin hydration and skin elasticity were remarkable enhanced after topical application of developed prototypes, a hydration effect up to 74% being determined and a skin elasticity reaching 90%. The knowledge acquired from this investigation could be utilized by the cosmetic industry to design novel topical products with improved quality and health benefices, endowed with antioxidant, anti-inflammatory and anti-acne actions and with desired hydration and elasticity profiles, in order to achieve better therapeutic efficacy and no drug toxicity.

Bioavailability and Bioactivity of Encapsulated Phenolics and Carotenoids Isolated from Red Pepper Waste.

In order to deactivate the health properties of bioactive compounds, they need to withstand the effects of food processing, their potential release from the food matrix, and remain bio-accessible in the gastrointestinal tract. Bio-actives from different plants are prone to oxidative degradation, and encapsulation is an effective method in improving their stability. In the present study, red pepper waste (RPW), a by-product of vegetable processing industry, was encapsulated in whey protein using spray and freeze-drying techniques. The aim was to evaluate the effects of in vitro gastrointestinal digestion on the release and bioactivity of encapsulated bio-actives, after each digestion step. The results showed that the release of phenolics and carotenoids, as well as antioxidants, anti-hyperglycemic, and anti-inflammatory activities are influenced by pH and intestinal fluid, with pH 7.5 exhibited at higher levels. There was a rapid initial release of carotenoids from whey protein matrices, while a more gradual increase of phenolics was observed, reaching around 50% for both encapsulates first at 6 h and 37 °C, and small intestine conditions. The encapsulation of RPW demonstrated a protective effect against pH changes and enzymatic activities along digestion, and contributed to the increase in bio-accessibility in the gut. Also, the results suggest that encapsulation is an efficient method for valorization of bio-actives from RPW, with improvements in nutrition, color, and bioactive properties.

Avocado Oil Incorporated in Ultrafine Zein Fibers by Electrospinning

The objective of this study was to encapsulate avocado oil in ultrafine zein fibers by the electrospinning technique. Avocado oil, at concentrations of 15 and 30% (w/w), was incorporated into 20, 25 and 30% (w/v) zein polymer solutions. The polymer solutions were evaluated for viscosity and electrical conductivity. The zein fibers containing the avocado oil were evaluated for the efficiency of encapsulation, morphology and size distribution of diameter, FTIR-ATR and X-ray diffraction, as well as for the release of carotenoids in gastrointestinal conditions in vitro. At the concentration of 30% zein, continuous ultrafine fibers were obtained, without bead formation and with mean diameter distribution ranging from 618 to 971 nm, whose encapsulation efficiency was higher than 77%. The FTIR-ATR analysis showed the encapsulation of the oil, and X-ray diffraction showed the amorphous structure of the fibers. It was verified that the composite fiber of 30% of zein and 30% of oil had a release profile close to the ideal of carotenoid release under simulated gastrointestinal conditions.