Release Of Ballast Water Research Articles

Assessment of water quality and heavy metal contamination in ballast water: Implications for marine ecosystems and human health

The global menace of non-compliance with ballast water management poses a pressing environmental threat, as it facilitates the transfer of harmful organisms and sediment contaminants. This study investigates the environmental impact of ballast water discharged by ships, focusing on water quality and heavy metal concentrations. The release of ballast water, often containing elevated levels of heavy metals like mercury, lead, and cadmium, poses a significant threat to marine ecosystems. The research, involving water sample collection from ten different vessels across various countries, assesses physicochemical parameters and heavy metal concentrations. Results indicate variations in temperature, turbidity, conductivity, dissolved oxygen, and pH levels among samples. Turbidity values surpassing WHO limits suggest potential anthropogenic pollution. The study identifies significant differences in pH values, potentially influencing microbial populations. Total dissolved solids and total suspended solids values vary, affecting the distribution of potential pathogens. The results reveal varying total concentrations of heavy metals (mg/L) in the following decreasing order: SA>SE>SF>SB>SC>SD>SH>SI>SG>SJ(6.07 >4.95 > 2.07 > 1.59>0.24>1.22>0.09>0.04>0.03>0.01). The highest concentration of heavy metals is recorded for iron (SA= 5.78), zinc (mg/L) (SB = 1.36, SE = 1.30, and SF = 1.35) and lead (Pb) (SE = 2.39). The elevated iron levels in vessels from SA are potentially linked to corrosion processes. Cadmium, lead, and nickel were not detected, except for lead in the sample from SE. Copper concentrations were aligned with EU standards in the vessels. Proper ballast water management is vital for monitoring water qualities, preventing environmental spread of heavy metals, ensuring marine ecosystem health, and developing compliance strategies for ships docking in ports. Highlights Global shipping causes heavy metal pollution, affecting human and ecosystem health Physicochemical parameters variations suggest potential pollution and microbial impact Mercury, lead, and cadmium in ballast water (BW) pose threats to marine ecosystems Increased iron levels could be associated with corrosion processes Effective BW management is crucial for environmental conservation

First Occurrence of the nonindigenous Asian foraminifera Ammonia confertitesta in the Northeastern Pacific Ocean: Vancouver Island, British Columbia, Canada

Observations in 2022 of intertidal and subtidal foraminiferal faunas at four localities along the central-eastern side of Vancouver Island, British Columbia, Canada, and molecular analyses have documented the first occurrence of the nonindigenous Asian species Ammonia confertitesta Zheng in the northwestern Pacific Ocean. The species was present at three of these localities: Davis Lagoon south of Ladysmith (4% in the lagoon and 49% on the beach) and 0.6% in Nanaimo Harbor. The vector of introduction is thought to be the release of ballast water and associated sediment. These releases probably occurred in the Port of Vancouver, which were then transported by means of the cyclonic circulation across the Strait of Georgia, or from local anchorages close to the sampling sites. The timing of the introduction is impossible to determine because no stratigraphic record is presently available. However, foraminiferal studies in the late 1980s near the Port of Vancouver that recovered calcareous taxa did not report the presence of this species, nor was it found at 33 sites sampled from 1997 to 1999 throughout the Strait of Georgia.

Vector control reduces the rate of species invasion in the world's largest freshwater ecosystem

AbstractThe Great Lakes‐St Lawrence River basin is the world's most invaded freshwater system. Ballast water release from transoceanic shipping is deemed responsible for 65% of invasions in the basin since the modern St. Lawrence Seaway opened in 1959. Regulations requiring mid‐ocean exchange of ballast water applied in 1993 failed to stem ship‐mediated invasions because the procedure was not mandated for all ships. In 2006 and 2008, Canada and the United States, respectively, mandated that all transoceanic ships should conduct open ocean flushing to ensure that partially filled ballast tanks intended for discharge into the Great Lakes contained water of salinity ≥30 ppt before entering the Seaway. These regulations have been strictly enforced through record inspections and tests of ballast tank salinities of inbound ships. Before‐and‐after comparisons of total organismal abundance and species richness in ballast tanks revealed a substantial reduction in invasion risk from ships that conducted saltwater flushing. Since 2006, the rate of discovery of newly established non‐native species in the Great Lakes declined by 85% to its lowest level in two centuries. While multiple factors could plausibly contribute to this decline, empirical evidence supports the 2006/2008 ballast water regulation as the primary cause, highlighting the benefit of internationally coordinated vector control.

Alien and cryptogenic Foraminifera in the Mediterranean Sea: A revision of taxa as part of the EU 2020 Marine Strategy Framework Directive

The human-mediated translocation of marine alien species beyond their natural ranges started as early as people began navigating the sea and is of growing concern to nature conservation. The Mediterranean Sea is among the most severely affected areas by biological invasions, a phenomenon that has been fostered by the opening and recent extension of the Suez Canal, the transport and release of ballast water, aquaculture and aquarium trade, ichthyochory and other active or passive dispersal mechanisms. The increase of marine invasions has stimulated considerable research, but for some important groups, in particular microorganisms, data are still limited. In this paper we have reviewed the current status of marine alien foraminifera in the Mediterranean Sea. Our survey includes a comrephensive taxonomic revision of previously recognized alien taxa, and new information obtained from the fossil record and from molecular studies. Our survey and reexamination of alien benthic foraminifera yielded a total of 43 validly recognized species and two species of cryptogenic taxa and reduces the number of previous recordings. The revised list includes both larger symbiont-bearing and smaller benthic foraminifera, including 16 hyaline-perforate, 3 agglutinated and 24 porcelaneous taxa. The vast majority of alien foraminifera recorded so far have become established in the Eastern and Central Mediterranean Sea, indicative for translocation and introduction via the Suez Canal pathway. Only one species, Amphistegina lobifera, causes significant ecological impacts and fulfills the criteria to be considered as an invasive alien. This species is a prolific carbonate producer, and displays extreme forms of ecosystem invasibility with capabilities to reduce native diversity and species richness. The proliferation and rates of recently observed range extensions, track contemporary sea surface temperature increases, provide strong support for previous species distribution models, and corroborate findings that rising water temperatures, global climate change and the extension of climate belts are major drivers fueling the latitudinal range expansion of larger symbiont-bearing and smaller epiphytic foraminifera. Intensified efforts to study alien foraminifera on a molecular level, in dated cores and in ballast water are required to trace their source of origin, to identify vectors of introduction and to verify their status as true aliens.

Numerical Modelling of Ballast Water Dispersion in Different Bioregions along the Coast of India

Aquatic organisms and pathogens may become major threats to the coastal and marine environment when introduced into a region beyond their natural distributions through ballast water (BW). Coastal currents induced by tides and winds, especially ebb currents, may facilitate the spread of these marine organisms along nearshore and inshore areas. Numerical modelling of hydrodynamics is an effective tool to track the dispersion of these organisms in the receiving water body through BW release. Particle transport models can be used to track the advection and dispersion of these organisms. Alternatively, the difference in salinity of the BW and coastal waters can be used as a tracer to estimate the dispersion pattern. Tides and winds present in the region at the time of BW release are responsible for the dispersal of the particles present in BW discharge. Based on advection and dispersion processes, the transport of the marine organisms present in the BW can be studied using numerical models. Numerical modelling studies were carried out using the 2-D hydrodynamic model MIKE21 HD, to understand the pattern of BW dispersion at select bioregions along the east and west coasts of India. Mangalore Port located along the west coast in Bioregion-I (CIO-I) and Chennai Port on the east coast in Bioregion-II (CIO-II) were selected for the modelling study. Results obtained from ballast water dispersion modelling studies will be useful for developing and assisting port-based ballast water management programmes for CIO-I and CIO-II regions. The currents are predominantly tide driven near the ports situated along the west coast and the circulation exhibited reversals associated with the tidal currents. However, along the east coast of India, the particles largely followed coastal currents - advected either southward or northward under the influence of prevailing coastal currents in the offshore region and tidal reversals showed had less impact. This information proved useful for determining suitable locations for BW discharge and monitoring points for field sampling in connection with BW release.

The risk of marine bioinvasion caused by global shipping

The rate of biological invasions has strongly increased during the last decades, mostly due to the accelerated spread of species by increasing global trade and transport. Here, we combine the network of global cargo ship movements with port environmental conditions and biogeography to quantify the probability of new primary invasions through the release of ballast water. We find that invasion risks vary widely between coastal ecosystems and classify marine ecoregions according to their total invasion risk and the diversity of their invasion sources. Thereby, we identify high-risk invasion routes, hot spots of bioinvasion and major source regions from which bioinvasion is likely to occur. Our predictions agree with observations in the field and reveal that the invasion probability is highest for intermediate geographic distances between donor and recipient ports. Our findings suggest that network-based invasion models may serve as a basis for the development of effective, targeted bioinvasion management strategies.

Ballast water treatment technologies: hydrocyclonic a viable option

Many governments, international maritime environmental entities and public health organizations have recognized the environmental, economic and health threats caused by the translocation and release of ballast water. A wide variety of ballast water treatment systems are available at both commercial and under evaluation levels. The available ballast water treatment technologies are reviewed. This work reviews the various types of technologies used in treating ballast water and special attention is given to hydrocyclonic system. Small scale pilot plant hydrocyclone was investigated to identify the behaviour of solid particle separation under the effect of alum addition during the separation. The addition of alum gave a clear improvement on the particle separation but still the use of such a chemical is questionable due to the environmental impact and quantity and time to get effective separation. For particle size greater than 0.8 mm, the removal efficiency ranges from 70 to 86% without alum and from 73 to 90% with alum. The improvement in the removal efficiency is estimated around an average of 4% only. Whereas, for particle size less than 0.3 mm, the removal efficiency ranges from 16.5 to 57% without alum and from 27 to 75% with alum. The addition of alum gave around an average of 15% improvement in the removal efficiency. This concludes that the addition of alum has greater impact on the removal efficiency for particle sizes less than 0.3 mm and less impact on greater particle sizes.

Patterns of invasion in the Laurentian Great Lakes in relation to changes in vector activity

ABSTRACTThe Laurentian Great Lakes basin has been invaded by at least 182 non‐indigenous species. A new invader is discovered every 28 weeks, which is the highest rate recorded for a freshwater ecosystem. Over the past century, invasions have occurred in phases linked to changes in the dominant vectors. The number of ship‐vectored invaders recorded per decade is correlated with the intensity of vessel traffic within the basin. Ballast water release from ocean vessels is the putative vector for 65% of all invasions recorded since the opening of the St. Lawrence Seaway in 1959. As a preventive measure, ocean vessels have been required since 1993 to exchange their freshwater or estuarine ballast with highly saline ocean water prior to entering the Great Lakes. However, this procedure has not prevented ship‐vectored species introductions. Most ships visiting the Great Lakes declare ‘no ballast on board’ (NOBOB) and are exempt from the regulation, even though they carry residual water that is discharged into the Great Lakes during their activities of off‐loading inbound cargo and loading outbound cargo. Recently introduced species consist predominantly of benthic invertebrates with broad salinity tolerance. Such species are most likely to survive in a ballast tank following ballast water exchange, as well as transport in the residual water and tank sediments of NOBOB ships. Thus, the Great Lakes remain at risk of being invaded by dozens of euryhaline invertebrates that have spread into Eurasian ports from whence originates the bulk of foreign ships visiting the basin.

Sensitivity of aquatic invertebrate resting eggs to SeaKleen® (Menadione): A test of potential ballast tank treatment options

The introduction of aquatic species in resting life stages by the release of ballast water is a less well-known but potentially important invasive species vector. Best-management practices designed to minimize transport of ballast water cannot eliminate this threat, because residual water and sediment are retained in ballast tanks after draining. To evaluate the potential efficacy of chemical treatment of residual material in ship ballast tanks, the present study examined the acute toxicity of the proposed biocide SeaKleen (menadione; Garnett, Watkinsville, GA, USA) on resting eggs of Brachionus plicatilis (a marine rotifer), a freshwater copepod, Daphnia mendotae (a freshwater cladoceran), and Artemia sp. (a marine brine shrimp). SeaKleen was toxic to resting eggs of all taxa. Daphnia mendotae resting eggs encased in protective ephippia were the least sensitive, as indicated by a 24-h lethal concentration of toxicant to 90% of organisms of 8.7 mg/L (95% confidence interval, +/- 0.1 mg/L). SeaKleen induced teratogenic effects in D. mendotae and Artemia sp. Exposure to sunlight quickly degraded SeaKleen, which lost all toxicity after 72 h outdoors. SeaKleen increased in toxicity slightly after 72 h in darkness. Burial of D. mendotae ephippia in natural lake sediment reduced SeaKleen toxicity by a factor of 20. Reduced toxicity in the presence of sediment raises serious doubts as to the potential for this, or any, chemical biocide to kill aquatic invertebrate resting stages buried in sediment retained in ship ballast tanks.

Comparative Efficacy of Potential Chemical Disinfectants for Treating Unballasted Vessels

The release of ballast water from transoceanic vessels is a major vector for the introduction of nonindigenous species into the Laurentian Great Lakes. This study assessed the effectiveness of treating unballasted transoceanic vessels using three different biocides: glutaraldehyde plus a surfactant adjuvant (Disinfekt 1000 ®), sodium hypochlorite (NaOCl), and SeaKleen™ (menadione and menadione metabisulfite 2:8). Efficacy against several classes of aquatic organisms was evaluated using 24 h acute toxicity experiments and 11 day ballast tank simulation experiments. The results indicate substantial, compound-specific variations in organism sensitivity. For water-only exposures, NaOCl and SeaKleen™ were most effective: NaOCl had the lowest LC 90 (90% lethal concentration value) for the oligochaete Lumbriculus variegatus (1.0 mg L −1), while SeaKleen™ had the lowest LC 90 for the amphipod Hyalella azteca (2.5 mg L −1). Sediments profoundly affected efficacy, particularly for NaOCl: At a 1:4 sediment-water ratio, the estimated LC 90 for L. variegatus was > 2,000 mg L −1. Sediment quality also impacted efficacy: Sediments with higher organic carbon content typically required greater biocide concentrations to achieve comparable toxicity. Efficacy was further evaluated with 11 day bioassays using sediments from unballasted vessels. Results indicated that NaOCl and Disinfekt 1000 ® were more effective than predicted based on small scale sediment-water exposures. Overall, the data suggest that although NaOCl may be effective under water-only conditions, the higher concentrations required in the presence of sediments may cause corrosion problems for ballast tanks. Because of this, less reactive, non-oxidizing biocides such as SeaKleen™ and Disinfekt 1000 ® may be better candidates for treating sedimented tanks.

Invasion pressure to a ballast-flooded estuary and an assessment of inoculant survival

The relationships between invasion pressure, post-transport inoculant survival, and regional susceptibility to invasion are poorly understood. In marine ecosystems, the movement and release of ballast water from ocean-going ships provides a model system by which to examine the interplay among these factors. One of the largest estuaries in North America, the Chesapeake Bay, receives tremendous amounts of foreign ballast water annually and thus should be at high invasion risk. To date, however, few introductions in Chesapeake Bay have been attributed to ballast release. To understand better the dynamics of this invasion process, we (1) characterized and quantified the biota arriving to Chesapeake Bay in foreign ballast water, (2) compared temperatures and salinities of ballast water and harbor water in upper Chesapeake Bay, and (3) tested experimentally survival of organisms collected from ballast water in temperatures and salinities characteristic of the region. From 1993 to 1994, we sampled planktonic and benthic organisms from 60 foreign vessels arriving to Chesapeake Bay. Our data show that the estuary is being inoculated by a diverse assemblage of aquatic organisms from around the world. Furthermore, the short transit time (≤15 d) for most vessels ensured that substantial numbers of larval and post-larval organisms were being deballasted alive. Most of the ballast water discharged into the upper Chesapeake Bay, however, was significantly higher in salinity (>20‰) than that of the receiving harbor. In laboratory tolerance experiments, ballast water organisms perished under such conditions. Thus, a mismatch in physical conditions between donor and receiver regions may explain the dearth of invasions in the upper Bay. It is likely that the lower Chesapeake Bay, which is more saline, remains at higher risk to ballast water invasion. Recognition of such intraregional differences should allow more focused predictions for monitoring and management.

Stable isotopes and heavy metal distribution in Dreissena polymorpha (Zebra Mussels) from western basin of Lake Erie, Canada

Dreissena polymorpha is an exotic freshwater bivalve species which was introduced into the Great Lakes system in the fall of 1985 through the release of ballast water from European freighters. Utilizing individual growth rings of the shells, the stable isotope distribution (δ18O and δ13C) was determined for the life history of selected samples which were collected from the western basin of Lake Erie. These bivalves deposit their shell in near equilibrium with the ambient water and thus reflect any annual variation of the system in the isotopic records held within their shells. Observed values for δ18O range from -6.64 to –9.46‰ with an average value of –7.69‰ PDB, while carbon values ranged from –0.80 to –4.67‰ with an average value of –1.76‰ PDB. Dreissena polymorpha shells incorporate metals into their shells during growth. Individual shell growth increments were analyzed for Pb, Fe, Mg, Mn, Cd, Cu, and V concentrations. The shells show increased uptake of certain metals during periods of isotopic enrichment which correspond with warmer water temperatures. Since metals are incorporated into the shells, the organism may be useful as a biomonitor of metal pollution within aquatic environments.

Avoidance Behavior of Ruffe Exposed to Selected Formulations of Piscicides

Ruffe were introduced into Duluth Harbor, Minnesota in the early 1980s, probably by release of ballast water from sea-going freighters. Since then, it has become the most abundant species in the fish community. The sensitivity of ruffe to a number of piscicides has been demonstrated, however, the feasibility of using piscicides to control populations depends on whether ruffe can detect piscicides and move to untreated water. We used a two-choice preference testing system to evaluate avoidance or attraction reactions of ruffe during exposures to the lampricides TFM and bayluscide and the general fish toxicants rotenone and antimycin. We used a second testing system to evaluate the potential for benthic ruffe to move vertically in the water column to avoid piscicides dissolving from experimental bottom-release formulations of bayluscide and antimycin. Near-lethal concentrations of TFM and rotenone tended to repel ruffe. Antimycin and bayluscide did not seem to repel ruffe in the avoidance chamber, but bottom-release formulations (antimycin granules—0.25% a.i. and bayluscide granules—3.2% a.i.) did cause increased swimming and surfacing activity among ruffe in column tests. We conclude that TFM and rotenone could be used to treat entire bodies of water, while bottom-release formulations of antimycin and bayluscide may have more application for treating localized concentrations of ruffe.

Introduction and spread of Philine auriformis (Gastropoda: Opisthobranchia) from New Zealand to San Francisco Bay and Bodega Harbor

Specimens of Philine auriformis have been observed in the southern portion of San Francisco Bay, California, since summer 1992. Specimens from Bodega Harbor were first discovered from intertidal mudflats in April 1994 and probably represent the spread of the San Francisco Bay population to a neighboring estuary. Their numbers have increased steadily and the species is now well established in both estuaries. Examination of the anatomy of specimens collected from California was compared with that described from New Zealand. No significant differences in anatomy were detected in animals from these different localities. It is suggested that the species was introduced into California waters by release of ballast water from international shipping.