Release Of Albumin Research Articles

Biomimetic gold nanocages incorporating copper-human serum albumin for tumor immunotherapy via cuproptosis-lactate regulation

Cancer immunotherapy remains a significant challenge due to insufficient proliferation of immune cells and the sturdy immunosuppressive tumor microenvironment. Herein, we proposed the hypothesis of cuproptosis-lactate regulation to provoke cuproptosis and enhance anti-tumor immunity. For this purpose, copper-human serum albumin nanocomplex loaded gold nanocages with bacterial membrane coating (BAu-CuNCs) were developed. The targeted delivery and disassembly of BAu-CuNCs in tumor cells initiated a cascade of reactions. Under near infrared (NIR) laser irradiation, the release of copper-human serum albumin (Cu-HSA) was enhanced that reacted with intratumoral glutathione (GSH) via a disulfide exchange reaction to liberate Cu2+ ions and exert cuproptosis. Subsequently, the cuproptosis effect triggered immunogenic cell death (ICD) in tumor by the release of damage associated molecular patterns (DAMPs) to realize anti-tumor immunity via robust production of cytotoxic T cells (CD8+) and helper T cells (CD4+). Meanwhile, under NIR irradiation, gold nanocages (AuNCs) promoted excessive reactive oxygen species (ROS) generation that played a primary role in inhibiting glycolysis, reducing the lactate and ATP level. The combine action of lower lactate level, ATP reduction and GSH depletion further sensitized the tumor cells to cuproptosis. Also, the lower lactate production led to the significant blockage of immunosuppressive T regulatory cells (Tregs) and boosted the anti-tumor immunity. Additionally, the effective inhibition of breast cancer metastasis to the lungs enhanced the anti-tumor therapeutic impact of BAu-CuNCs + NIR treatment. Hence, BAu-CuNCs + NIR concurrently induced cuproptosis, ICD and hindered lactate production, leading to the inhibition of tumor growth, remodeling of the immunosuppressive tumor microenvironment and suppression of lung metastasis. Therefore, leveraging cuproptosis-lactate regulation, this approach presents a novel strategy for enhanced tumor immunotherapy.

Abstract 237: Establishment of an ex vivo tissue culture model as a potential preclinical drug testing platform for hepatocellular carcinoma

Abstract Background: Hepatocellular carcinoma (HCC) is a leading cause of cancer-related deaths worldwide, and there is a critical need for more effective treatments. The development of new therapies, especially those aiming to modulate the tumor microenvironment (TME), is limited by the lack of in vitro and in vivo models that recapitulate the complexity of the TME and spatial architecture of HCC. Here, we aimed to establish an HCC model to assess the treatment response and hepatotoxicity of selected drugs by ex vivo culturing fresh human liver tumor tissue and adjacent normal tissue, respectively. Materials and Methods: Fresh human liver tissues, including 5 malignant and 20 adjacent-normal, were obtained from surgical resections. PDX tumors were generated from patient-derived organoids. Tissue resections were cut into ultra-thin slices (from 150µm to 350µm) using a vibratome. Related culture conditions such as high oxygen partial pressure, air-liquid interface (ALI) culture, artificial extracellular matrix (AEM), and delay duration were evaluated to optimize the protocol. As a readout, cell viability was quantified by an expert pathologist using Hematoxylin/Eosin staining. The preservation and complexity of the TME were evaluated by immunohistochemistry or flow cytometry using specific antibodies for each cell population (T cells, anti-CD3; stroma cells, a-SMA; endothelial cells, CD34; Kupffer cells, CD68). Liver cell function was tested by measuring ALT/AST activity, albumin release, and CYP340 activity. Results: The highest tissue viability was observed in normal and tumor tissue with a thickness of 150µm and 250µm, respectively. Compared to standard conditions, the combination of ALI and high-oxygen partial pressure conditions dramatically improved tissue viability, with most of the samples having 70% and 50% cell viability at days 3 and 5 of ex vivo culture, respectively (p<0.05). AEM could prevent the efflux of cellular components (p=0.016). The impact of the time delay between the liver resection and the start of slicing was minimal when the slicing occurred within two hours after hepatectomy (p<0.05). Key cellular components including hepatocytes, T cells, fibroblasts, and Kupffer cells also remained better preserved throughout the 5-day culture period in optimized conditions. Conclusion: Our study has successfully optimized the ex vivo tissue culture model of liver tissue, capable of maintaining the tissue for several days while preserving the unique TME. These results highlight the potential of using the ex vivo tissue culture model in the preclinical setting to further investigate and evaluate TME-related treatments and their hepatotoxicity in HCC tissues. Citation Format: Huiche Feng, Miriam Cieri, Cinzia Esposito, Karolina Guja-Jarosz, Daniela Liberati, Lukas Bubendorf, Savas Deniz Soysal, Mairene Coto-Llerena, Luigi Maria Terracciano, Otto Kollmar, Salvatore Piscuoglio. Establishment of an ex vivo tissue culture model as a potential preclinical drug testing platform for hepatocellular carcinoma [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 237.

Time-Delayed Anticancer Effect of an Extremely Low Frequency Alternating Magnetic Field and Multimodal Protein-Tannin-Mitoxantrone Carriers with Brillouin Microspectroscopy Visualization In Vitro.

The effect of an extremely low frequency alternating magnetic field (ELF AMF) at frequencies of 17, 48, and 95 Hz at 100 mT on free and internalized 4T1 breast cancer cell submicron magnetic mineral carriers with an anticancer drug, mitoxantrone, was shown. The alternating magnetic field (100 mT; 17, 48, 95 Hz; time of treatment-10.5 min with a 30 s delay) does not lead to the significant destruction of carrier shells and release of mitoxantrone or bovine serum albumin from them according to the data of spectrophotometry, or the heating of carriers in the process of exposure to magnetic fields. The most optimal set of factors that would lead to the suppression of proliferation and survival of cells with anticancer drug carriers on the third day (in comparison with the control and first day) is exposure to an alternating magnetic field of 100 mT in a pulsed mode with a frequency of 95 Hz. The presence of magnetic nanocarriers in cell lines was carried out by a direct label-free method, space-resolved Brillouin light scattering (BLS) spectrometry, which was realized for the first time. The analysis of the series of integrated BLS spectra showed an increase in the magnetic phase in cells with a growth in the number of particles per cell (from 10 to 100) after their internalization. The safety of magnetic carriers in the release of their constituent ions has been evaluated using atomic absorption spectrometry.

Unraveling mechanisms of protein encapsulation and release in coacervates via molecular dynamics and machine learning.

Coacervates play a pivotal role in protein-based drug delivery research, yet their drug encapsulation and release mechanisms remain poorly understood. Here, we utilized the Martini model to investigate bovine serum albumin (BSA) protein encapsulation and release within polylysine/polyglutamate (PLys/PGlu) coacervates. Our findings emphasize the importance of ingredient addition sequence in coacervate formation and encapsulation rates, attributed to preference contact between oppositely charged proteins and poly(amino acid)s. Notably, coacervates composed of β-sheet poly(amino acid)s demonstrate greater BSA encapsulation efficiency due to their reduced entropy and flexibility. Furthermore, we examined the pH responsiveness of coacervates, shedding light on the dissolution process driven by Coulomb forces. By leveraging machine learning algorithms to analyze simulation results, our research advances the understanding of coacervate-based drug delivery systems, with the ultimate goal of optimizing therapeutic outcomes.

Bioinspired poly(aspartic acid) based hydrogel with ROS scavenging ability as mEGF carrier for wound repairing applications.

Poly(amino acid) based self-healing hydrogels have important application in biomedications. In this research, the catechol pendant groups were imported to poly(aspartic acid) based self-healing hydrogel to improved skin adhesion and ROS scavenging performance. The poly(succinimide) (PSI) was reacted with 3,4-dihydroxyphenylalanine (DA) and then hydraziolyzed to import catechol group and hydrazide group respectively, which are responsible for mussel inspired tissue adhesion and dynamic coupling reactivity. The dopamine modified poly(aspartic hydrazide) (PDAH) was reacted with PEO90 dialdehyde (PEO90 DA) to prepare hydrogels, and the resultant hydrogel showed good biocompatibility both in vitro and in vivo. The skin adhesion strength of the mussel inspired hydrogel increased notably with enhanced radical scavenging efficiency fit for in vivo wound repairing applications. The PDAH/PEO90 DA hydrogel also showed sustained albumin release profile and the in vivo wound repairing experiment proved the mouse Epidermal Growth Factor (mEGF) loaded hydrogel as wound dressing material accelerated the wound repairing rate.

Guar-Based Injectable Hydrogel for Drug Delivery and In Vitro Bone Cell Growth.

Injectable hydrogels offer numerous advantages in various areas, which include tissue engineering and drug delivery because of their unique properties such as tunability, excellent carrier properties, and biocompatibility. These hydrogels can be administered with minimal invasiveness. In this study, we synthesized an injectable hydrogel by rehydrating lyophilized mixtures of guar adamantane (Guar-ADI) and poly-β-cyclodextrin (p-βCD) in a solution of phosphate-buffered saline (PBS) maintained at pH 7.4. The hydrogel was formed via host-guest interaction between modified guar (Guar-ADI), obtained by reacting guar gum with 1-adamantyl isocyanate (ADI) and p-βCD. Comprehensive characterization of all synthesized materials, including the hydrogel, was performed using nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and rheology. The in vitro drug release study demonstrated the hydrogel's efficacy in controlled drug delivery, exemplified by the release of bovine serum albumin (BSA) and anastrozole, both of which followed first-order kinetics. Furthermore, the hydrogel displayed excellent biocompatibility and served as an ideal scaffold for promoting the growth of mouse osteoblastic MC3T3 cells as evidenced by the in vitro biocompatibility study.

Features of the development of experimental nephropathy in rats during the use of doxorubicin

BACKGROUND. One of the most frequently reproduced models of NS is doxorubicin (adriamycin) nephropathy in rats. However, the mechanisms of its development remain insufficiently studied, and it is not entirely clear to which form of NS the nephrotoxicity induced by doxorubicin should be attributed.THE AIM. Reproduction of doxorubicin nephropathy in rats in an attempt to morphologically identify the resulting pathology and determine the role of free radical oxidation (FRO) in the development of this model of nephrotoxicity.MATERIALS AND METHODS. Nephropathy was reproduced by a single intravenous administration of doxorubicin to male Wistar rats. In the urine, the content of creatinine, daily proteinuria, and albumin release were determined. Histological examination of the kidneys was performed using a Libra 120 electron microscope (Carl Zeiss, Germany). The total prooxidant activity, total antioxidant activity, the concentration of thiobarbiturate-reactive products, and the activity of antioxidant enzymes were assessed in the blood and kidney.RESULTS. Against the background of a gradual decrease in the glomerular filtration rate, a significant consistent increase in protein excretion was recorded, largely due to an increase in albumin excretion. Electron microscopic examination revealed a decrease in the number of small (foot) processes of podocytes, their fusion, sclerotic lesions of the elements of the capillary glomerulus, thinning of the GBM, sclerosis of the interstitium. There was a sharp activation of blood OPA and an increase in the content of TBRP. At the same time, such fast-responding antioxidant enzymes as CAT and SOD were activated. The blood TAA decreased in parallel with the decrease in GPO activity.CONCLUSION. Intravenous administration of doxorubicin to rats induced the development of toxic kidney damage with signs of NS. A characteristic indicator was the development of PU against the background of a decrease in GFR from day 5 and increased many times by the end of the observation period. The greatest contribution to the development of PU was made by an in-crease in albumin excretion. Morphological examination of the kidneys using electron microscopy made it possible to conclude with a high degree of probability that the developed pathology and FSGS are similar. At the same time, FRO activation was recorded, which was expressed in a sig-nificant pro-oxidant effect and a significant decrease in the antioxidant activity of the blood.

A Single Injection with Sustained-Release Microspheres and a Prime-Boost Injection of Bovine Serum Albumin Elicit the Same IgG Antibody Response in Mice

Although vaccination is still considered to be the cornerstone of public health care, the increase in vaccination coverage has stagnated for many diseases. Most of these vaccines require two or three doses to be administered across several months or years. Single-injection vaccine formulations are an effective method to overcome the logistical barrier to immunization that is posed by these multiple-injection schedules. Here, we developed subcutaneously (s.c.) injectable microspheres with a sustained release of the model antigen bovine serum albumin (BSA). The microspheres were composed of blends of two novel biodegradable multi-block copolymers consisting of amorphous, hydrophilic poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) (PCL-PEG-PCL) blocks and semi-crystalline poly(dioxanone) (PDO) blocks of different block sizes. In vitro studies demonstrated that the release of BSA could be tailored over a period of approximately four to nine weeks by changing the blend ratio of both polymers. Moreover, it was found that BSA remained structurally intact during release. Microspheres exhibiting sustained release of BSA for six weeks were selected for the in vivo study in mice. The induced BSA-specific IgG antibody titers increased up to four weeks after administration and were of the same magnitude as found in mice that received a priming and a booster dose of BSA in phosphate-buffered saline (PBS). Determination of the BSA concentration in plasma showed that in vivo release probably took place up to at least four weeks, although plasma concentrations peaked already one week after administration. The sustained-release microspheres might be a viable alternative to the conventional prime-boost immunization schedule, but a clinically relevant antigen should be incorporated to assess the full potential of these microspheres in practice.

Dually responsive biodegradable drug releasing 3D printed structures

AbstractThe aim of this study was to develop temperature and pH‐responsive biodegradable 3D printed drug‐releasing constructs using the Digital Light Processing (DLP) printing technique. The printable molecules, named “inks” throughout this study, comprised polyethylene oxide–polypropylene oxide–polyethylene oxide (PEO–PPO–PEO) triblocks and acrylic acid (AAc) that rendered them reverse thermo‐responsive (RTR) and pH‐sensitive, respectively. Additionally, the inks' biodegradability was imparted to them by incorporating lactide (LA) and ε‐caprolactone (CL) units into their composition, while their printability was achieved by end‐capping them with 2‐Isocyanatoethyl methacrylate (IEMA). By fine tuning the LA/CL composition, a broad range of inks displaying different water absorption behavior, biodegradation as well as bovine serum albumin (BSA) release profiles at different conditions. All the hydrogels showed a fast and reversible swelling–deswelling response, as they fluctuated between pH 2.0 and pH 7.4 or between 10 and 37°C. The resultant hydrogels showed good water uptake capacity (6340%) at pH 7.4 and 10°C temperature. BSA release from the loaded 3D printed hydrogel showed a maximum (80.5%) at pH 7.4 and 10°C in comparison to pH 7.4 and 37°C (65%). The proposed dual responsive 3D printed biodegradable hydrogels objects will shed light as a drug carrier.

Permeation of albumin through the skin depending on its concentration and the substrate used in simulated conditions in vivo

ObjectiveMany drugs applied to the skin with a systemic effect do not have a therapeutic effect, due to the barrier posed by the complex structure of the skin. To counteract this, absorption promoters are often added to the drug formulation. The use of albumin as an effective drug carrier is increasingly being addressed. Albumin, a natural, non-toxic polymer, can target drugs to specific cells and extend their biological half-life. This study was designed to trace the permeation of albumin after topical administration to the skin as a potential carrier of therapeutic substances. Materials and methodsFour dermal formulations based on different polymers were prepared: methyl cellulose, sodium alginate, hypromellose and chitosan with methyl cellulose, obtaining final concentrations of albumin of 2%, 1.5% and 1%. The permeation of albumin through the skin was examined under simulated in vivo conditions. ResultsMost albumin permeated from the methylcellulose-based hydrogel. Depending on the concentration of albumin, permeation profiles were plotted and permeation rate constant and AUC(0–24 h) were calculated. ConclusionMethylcellulose was the optimal polymer for albumin release, whereas hypromellose was the least favorable. The concentration of albumin influences the amount and rate of permeation of this protein. The optimal concentration was 10 mg/g, from which the most albumin penetrated and the fastest. Human skin appeared to be more permeable to albumin than pig skin. However, the similar permeation profile through both membranes successfully allows the use of pig skin to track and evaluate the permeation of therapeutic substances with systemic effects.

Manufacturing of self-standing multi-layered 3D-bioprinted alginate-hyaluronate constructs by controlling the cross-linking mechanisms for tissue engineering applications

Three-dimensional (3D) bioprinting of self-supporting stable tissue and organ structure is critically important in extrusion-based bioprinting system, especially for tissue engineering and regenerative medicine applications. However, the development of self-standing bioinks with desired crosslinking density, biocompatibility, tunable mechanical strength and other properties like self-healing, in situ gelation, drug or protein incorporation is still a challenge. In this study, we report a hydrogel bioink prepared from alginate (Alg) and hyaluronic acid (HA) crosslinked through multiple crosslinking mechanisms, i.e. acyl-hydrazone, hydrazide interactions and calcium ions. These Alg-HA gels were highly dynamic and shear-thinning with exceptional biocompatibility and tunable mechanical properties. The increased dynamic nature of the gels is mainly chemically attributed to the presence of acyl-hydrazone bonds formed between the amine groups of the acyl-hydrazide of alginate and the monoaldehyde of the HA. Among the different combinations of Alg-HA gel compositions prepared, the A5H5 (Alginate-acyl-hydrazide:HA-monoaldehyde, ratio 50:50) gel showed a gelation time of ∼60 s, viscosity of ∼400 Pa s (at zero shear rate), high stability in various pH solutions and increased degradation time (>50 days) than the other samples. The A5H5 gels showed high printability with increased post-printing stability as observed from the 3D printed structures (e.g. hollow tube (∼100 layers), porous cube (∼50 layers), star, heart-in, meniscus and lattice). The scanning electron microscopy analysis of the 3D constructs and hydrogels showed the interconnected pores (∼181 µm) and crosslinked networks. Further, the gels showed sustained release of 5-amino salicylic acid and bovine serum albumin. Also, the mechanical properties were tuned by secondary crosslinking via different calcium concentrations. In vitro assays confirmed the cytocompatibility of these gels, where the 3D bioprinted lattice and tubular (∼70 layers) constructs demonstrated high cell viability under fluorescence analysis. In in vivo studies, Alg-HA gel showed high biocompatibility (>90%) and increased angiogenesis (threefolds) and reduced macrophage infiltration (twofold decrease), demonstrating the promising potential of these hydrogels in 3D bioprinting applications for tissue engineering and regenerative medicine with tunable properties.

Polypyrrole Cubosomes with Ordered Ultralarge Mesopore for Controllable Encapsulation and Release of Albumin.

Despite substantial progress in porous materials over past years, controllable preparation of conductive polymers (CPs) with continuous large pores is challenging, which are important for diverse applications, including energy storage, electrocatalysis, and biological separations. Here, we develop an unprecedented ordered bicontinuous mesoporous PPy cubosomes (mPPy-cs) using a soft-template strategy, resulting in ultralarge pores of ∼45 nm and high specific surface area of 69.5 m2 g-1. Along with their unique characteristics of adjustable surface charges and sensitivity to pH, mPPy-cs exhibited a near quantitative adsorption of albumin within 30 min, enabling efficient separation from immunoglobulin G, a typical inclusion in commercial albumin products. Moreover, the absorbed albumin could be further released in a controlled manner by lowering the pH. This work provides a feasible strategy for bottom-up construction of CPs with tailored pore sizes and nanoarchitectures, expected to attract significant attention to their properties and applications.

Conductive polypyrrole-coated electrospun chitosan nanoparticles/poly(D,L-lactide) fibrous mat: influence of drug delivery and Schwann cells proliferation

For nerve tissue engineering (NTE), scaffolds with the ability to release drugs under control and support the rapid proliferation of cells are very important for the repair of nerve defects. This study aimed to fabricate a conductive drug-loaded fiber mat by electrospinning and assess its potential as a scaffold for Schwann cells proliferation. The conductive polypyrrole (PPy) was coated on an electrospun poly (D, L-lactide) (PLA) fibrous mat, which was simultaneously embedded with protein-loaded chitosan nanoparticles and ibuprofen as a model small molecule drug. The fibrous mat shows suitable conductivity, mechanical properties, and hydrophilicity for NTE. For drug release and degradation studies, the fibrous mat can achieve sustained release of bovine serum albumin (BSA) and ibuprofen, and the PPy coating can increase the surface wettability and conductivity while slowing down the degradation of the fibrous mat. The application of electrical stimulation (ES) to the fibrous mat can accelerate the release of ibuprofen, but there was no significant effect on the release rate of the protein. The fibrous mat showed no cytotoxicity in vitro, and Schwann cells (SCs) can adhere, grow, and proliferate well on mats. At the 120th hour of culture in vitro, the relative growth rate of SCs on the conductive drug-loaded fibrous mat reached 198.22 ± 2.34%, which was an increase of 37.93% compared to the SCs on the drug-loaded fibrous mat with ES. The density and elongation of SCs on the conductive drug-loaded fibrous mat were greater than those on the PLA fibrous mat, indicating that the conductive polypyrrole-coated electrospun chitosan nanoparticles/PLA fibrous mat has good potential for application in nerve regeneration.

Light-Sensitive Phenacyl Crosslinked Dextran Hydrogels for Controlled Delivery.

Stimuli‐responsive soft materials enable controlled release of loaded drug molecules and biomolecules. Controlled release of potent chemotherapeutic or immunotherapeutic agents is crucial to reduce unwanted side effects. In an effort to develop controlled release strategies that can be triggered by using Cerenkov luminescence, we have developed polymer hydrogels that can release bovine serum albumin and immunoglobulin G by using light (254 nm–375 nm) as a trigger. We describe the synthesis and photochemical characterization of two light sensitive phenacyl bis‐azide crosslinkers that are used to prepare transparent self‐supporting hydrogel patches. One crosslinker was designed to optimize the overlap with the Cerenkov luminescence emission window, bearing an π‐extended phenacyl core, resulting in a high quantum yield (14 %) of photocleavage when irradiated with 375 nm light. We used the extended phenacyl crosslinker for the preparation of protein‐loaded dextran hydrogel patches, which showed efficient and selective dosed release of bovine serum albumin or immunoglobulin G after irradiation with 375 nm light. Cerenkov‐triggered release is as yet inconclusive due to unexpected side‐reactivity. Based on the high quantum yield, efficient release and large overlap with the Cerenkov window, we envision application of these photosensitive soft materials in radiation targeted drug release.

Pectin-Zeolite-Based Wound Dressings with Controlled Albumin Release.

Hypoalbuminemia can lead to poor and delayed wound healing, while it is also associated with acute myocardial infarction, heart failure, malignancies, and COVID-19. In elective surgery, patients with low albumin have high risks of postoperative wound complications. Here, we propose a novel cost-effective wound dressing material based on low-methoxy pectin and NaA-zeolite particles with controlled albumin release properties. We focused on both albumin adsorption and release phenomena for wounds with excess exudate. Firstly, we investigated albumin dynamics and calculated electrostatic surfaces at experimental pH values in water by using molecular dynamics methods. Then, we studied in detail pectin–zeolite hydrogels with both adsorption and diffusion into membrane methods using different pH values and albumin concentrations. To understand if uploaded albumin molecules preserved their secondary conformation in different formulations, we monitored the effect of pH and albumin concentration on the conformational changes in albumin after it was released from the hydrogels by using CD-UV spectroscopy analyses. Our results indicate that at pH 6.4, BSA-containing films preserved the protein’s folded structure while the protein was being released to the external buffer solutions. In vitro wound healing assay indicated that albumin-loaded hydrogels showed no toxic effects on the fibroblast cells.

A rodent thyroid-liver chip to capture thyroid toxicity on organ function level.

Endocrine disruption by environmental chemicals continues to be a concern for human safety. The rat, a widely used model organism in toxicology, is very sensitive to chemical-induced thyroid perturbation, e.g., histopathological alterations in thyroid tissue. Species differences in the susceptibility to thyroid perturbation lead to uncertainty in human safety risk assessments. Hazard identification and characterization of chemically induced thyroid perturbation would therefore benefit from in vitro models addressing different mechanisms of action in a single functional assay, ideally across species. We here introduce a rat thyroid-liver chip that enables simultaneous identification of direct and indirect (liver-mediated) thyroid perturbation on organ-level functions in vitro. A second manuscript describes our work toward a human thyroid-liver chip (Kühnlenz et al., 2022). The presented microfluidic model consisting of primary rat thyroid follicles and liver 3D spheroids maintains a tissue-specific phenotype for up to 21 days. More precisely, the thyroid model exhibits a follicular architecture expressing basolateral and apical markers and secretes T4. Likewise, liver spheroids retain hepatocellular characteristics, e.g., a stable release of albumin and urea, the presence of bile canalicular networks, and the formation of T4-glucuronide. Experiments with reference chemicals demonstrated proficiency to detect direct and indirect mechanisms of thyroid perturbation through decreased thyroid hormone secretion and increased gT4 formation, respectively. Prospectively this rat thyroid-liver chip model, together with its human counterpart, may support a species-specific quantitative in vitro to in vivo extrapolation to improve a data-driven and evidence-based human safety risk assessment with significant contributions to the 3R principles.

Fabrication of "Spongy Skin" on Diversified Materials Based on Surface Swelling Non-Solvent-Induced Phase Separation.

Porous surfaces have attracted tremendous interest for customized incorporation of functional agents on biomedical devices. However, the versatile preparation of porous structures on complicated devices remains challenging. Herein, we proposed a simple and robust method to fabricate "spongy skin" on diversified polymeric substrates based on non-solvent-induced phase separation (NIPS). Through the swelling and the subsequent phase separation process, interconnected porous structures were directly formed onto the polymeric substrates. The thickness and pore size could be regulated in the ranges of 5-200 and 0.3-0.75 μm, respectively. The fast capillary action of the porous structure enabled controllable loading and sustained release of ofloxacin and bovine albumin at a high loading dosage of 79.9 and 24.1 μg/cm2, respectively. We verified that this method was applicable to diversified materials including polymethyl methacrylate, polystyrene, thermoplastic polyurethane, polylactide acid, and poly(lactic-co-glycolic acid) and can be realized onto TCPS cell culture plates. This NIPS-based method is promising to generate porous surfaces on medical devices for incorporating therapeutic agents.

Microfluidic Production of Polymeric Core-Shell Microspheres for the Delayed Pulsatile Release of Bovine Serum Albumin as a Model Antigen.

For many vaccines, multiple injections are required to confer protective immunity against targeted pathogens. These injections often consist of a primer administration followed by a booster administration of the vaccine a few weeks or months later. A single-injection vaccine formulation that provides for both administrations could greatly improve the convenience and vaccinee’s compliance. In this study, we developed parenterally injectable core-shell microspheres with a delayed pulsatile release profile that could serve as the booster in such a vaccine formulation. These microspheres contained bovine serum albumin (BSA) as the model antigen and poly(dl-lactide-co-glycolide) (PLGA) with various dl-lactide:glycolide monomer ratios as the shell material. Highly monodisperse particles with different particle characteristics were obtained using a microfluidic setup. All formulations exhibited a pulsatile in vitro release of BSA after an adjustable lag time. This lag time increased with the increasing lactide content of the polymer and ranged from 3 to 7 weeks. Shell thickness and bovine serum albumin loading had no effect on the release behavior, which could be ascribed to the degradation mechanism of the polymer, with bulk degradation being the main pathway. Co-injection of the core-shell microspheres together with a solution of the antigen that serves as the primer would allow for the desired biphasic release profile. Altogether, these findings show that injectable core-shell microspheres combined with a primer are a promising alternative for the current multiple-injection vaccines.

Electrospun core-shell nanofibers with encapsulated enamel matrix derivative for guided periodontal tissue regeneration.

The osteogenic effect of a composite electrospun core-shell nanofiber membrane encapsulated with Emdogain® (EMD) was evaluated. The membrane was developed through coaxial electrospinning using polycaprolactone as the shell and polyethylene glycol as the core. The effects of the membrane on the osteogenic differentiation of periodontal ligament stem cells (PDLSCs) were examined using Alizarin Red S staining and qRT-PCR. Characterization of the nanofiber membrane demonstrated core-shell morphology with a mean diameter of ~1 µm. Examination of the release of fluorescein isothiocyanate-conjugated bovine serum albumin (FITC-BSA) from core-shell nanofibers over a 22-day period showed improved release profile of encapsulated proteins as compared to solid nanofibers. When cultured on EMD-containing core-shell nanofibers, PDLSCs showed significantly improved osteogenic differentiation with increased Alizarin Red S staining and enhanced osteogenic gene expression, namely OCN, RUNX2, ALP, and OPN. Core-shell nanofiber membranes may improve outcomes in periodontal regenerative therapy through simultaneous mechanical barrier and controlled drug delivery function.

In vitro released characteristics of BSA lubricants from Agarose hydrogel with tunable mechanical behaviors for artificial joint applications

Sustained release of the Bovine serum albumin (BSA) from agarose hydrogel has been suggested to decrease the frictional coefficient of hip implants. Hydrogel network formed with biological solvents such as simulated body fluid (SBF), sodium chloride (NaCl) and phosphate buffer solutions (PBS). Mechanical and rheological properties of hydrogel have been enhanced for injecting in load bearing area of the hip. Experimental evidences illustrated, hydrogel with PBS solvent produced stiffer network with slower deformation rate under heat and load. Cumulative released of lubricants have been moderated with regular and well-shaped pore structure to successfully reduce average of frictional coefficient with 47% reduction rate. Novelty of the present work provides an important candidate for the sustained biomedical material and pharmaceutical applications.