Relative Amounts Research Articles

Enhancing the Activity of a Carbon Nitride Photocatalyst by Constructing a Triazine-Heptazine Homojunction.

Establishing homojunctions at the molecular level between different but physicochemically similar phases belonging to the same family of materials is an effective approach to promoting the photocatalytic activity of polymeric carbon nitride (CN) materials. Here, we prepared a CN material with a uniform distribution of homojunctions by combining two synthetic strategies: supramolecular assemblies as the precursor and molten salt as the medium. We designed porous CN rods with triazine-heptazine homojunctions (THCNs) using a melem supramolecular aggregate (Me) and melamine as the precursors and a KCl/LiBr salt mixture as the liquid reaction medium. The triazine/heptazine ratio is controlled by varying the relative amounts of the chosen precursors, and the molten salt treatment enhances the structural order of the interplanar packing units for the THCN skeleton, leading to rapid charge migration. The resulting built-in electric field induced by the triazine-heptazine homojunction enhances photogenerated charge separation; the optimal THCN catalyst exhibits an excellent H2 evolution rate via photocatalytic water splitting, which is ∼24 times as high as that of reference bulk CN, with long-term stability.

Reaction Mechanism of Hydrogen Generation and Nitrogen Fixation at Carbon Nitride/Double Perovskite Heterojunctions

Photocatalytically active heterojunctions based on metal halide perovskites (MHPs) are drawing significant interest for their chameleon ability to foster several redox reactions. The lack of mechanistic insights into their performance, however, limits the ability of engineering novel and optimized materials. Herein, a report is made on a composite system including a double perovskite, Cs2AgBiCl6/g‐C3N4, used in parallel for solar‐driven hydrogen generation and nitrogen reduction, quantified by a rigorous analytical approach. The composite efficiently promotes the two reactions, but its activity strongly depends on the perovskite/carbon nitride relative amounts. Through advanced spectroscopic investigation and density function theory (DFT) modeling the H2 and NH3 production reaction mechanisms are studied, finding perovskite halide vacancies as the primary reactive sites for hydrogen generation together with a positive contribution of low loaded g‐C3N4 in reducing carrier recombination. For nitrogen reduction, instead, the active sites are g‐C3N4 nitrogen vacancies, and the heterojunction best performs at low perovskites loadings where the composites maximize light absorption and reduce carrier losses. It is believed that these insights are important add‐ons toward universal exploitation of MHPs in contemporary photocatalysis.

Reduction of Ferric Chloride in Yeast Growth Media, by Sugars and Aluminum

Iron compounds can be used in antimicrobial applications by exploiting the toxicity of divalent iron to living organisms due to the Fenton reaction. In this study, the growth inhibitory effects of ferrous sulfate FeSO4·7H2O and ferric chloride FeCl3·6H2O were observed on Metschnikowia clade and Saccharomyces cerevisiae yeast cells. The relatively high amount of reduced Fe3+ to Fe2+ in the growth medium determined by Mössbauer spectroscopy may contribute to the antimicrobial activity of ferric chloride. In order to test the reducing ability of sugars in the growth media of yeasts, the reaction of ferric chloride FeCl3·6H2O with sugars was investigated. In mixtures of FeCl3·6H2O and fructose, approximately two thirds of Fe3+ can be reduced to Fe2+. When the mixture of FeCl3·6H2O and fructose is placed on the surface of aluminum foil, an iron film is formed on the surface of the aluminum due to the reduction by both fructose and aluminum. The relative amount of Fe3+ which was reduced to Fe0 reached 68%.

Evaluation of lauric acid enhancement of black soldier fly larvae from coconut.

The current study evaluated the potential enhancement of lauric acid (LA) in black soldier fly, Hermetia illucens, (L.) (Diptera: Stratiomyidae) larvae (BSFL), a source of this short-chain fatty acid which has antimicrobial and immunostimulatory properties. Replicate groups of BSFL were reared on either the coconut or Gainesville diet for 7 days. After the rearing period, BSFL were harvested, purged, dried, and subjected to proximate, fatty acid and amino acid compositions, and pepsin digestibility analyses. Results demonstrate changes in proximate composition. BSFL reared on the coconut had significantly (P = 0.002) higher lipid content (47.3% vs. 25.2%) on a dry-matter basis. The LA concentration in BSFL produced on the coconut was 31% greater than those reared on Gainesville, resulting in almost 150% more LA. Furthermore, BSFL-fed coconut had reduced crude protein (29.7% of dry weight) and ash (3.7% of dry weight) relative to those fed Gainesville (43.4% and 7.5% for crude protein and ash, respectively) but higher pepsin digestibility (91.0% vs. 87.0%). The relative amounts of various amino acids in the 2 BSFL meals did not differ extensively, with statistically lower concentrations of only phenylalanine and tryptophan and higher concentrations of alanine, arginine, isoleucine, leucine, and serine in BSFL reared on coconut. Results demonstrate that the nutritional composition of BSFL can be manipulated, and an enhancement of LA concentrations of 150% was achieved with coconut, which has value for BSFL as a feed for various livestock, including aquaculture. Lower protein content is a tradeoff in terms of BSFL value as a feed additive.

Electron-induced deposition using Fe(CO)4MA and Fe(CO)5 - effect of MA ligand and process conditions.

The electron-induced decomposition of Fe(CO)4MA (MA = methyl acrylate), which is a potential new precursor for focused electron beam-induced deposition (FEBID), was investigated by surface science experiments under UHV conditions. Auger electron spectroscopy was used to monitor deposit formation. The comparison between Fe(CO)4MA and Fe(CO)5 revealed the effect of the modified ligand architecture on the deposit formation in electron irradiation experiments that mimic FEBID and cryo-FEBID processes. Electron-stimulated desorption and post-irradiation thermal desorption spectrometry were used to obtain insight into the fate of the ligands upon electron irradiation. As a key finding, the deposits obtained from Fe(CO)4MA and Fe(CO)5 were surprisingly similar, and the relative amount of carbon in deposits prepared from Fe(CO)4MA was considerably less than the amount of carbon in the MA ligand. This demonstrates that electron irradiation efficiently cleaves the neutral MA ligand from the precursor. In addition to deposit formation by electron irradiation, the thermal decomposition of Fe(CO)4MA and Fe(CO)5 on an Fe seed layer prepared by EBID was compared. While Fe(CO)5 sustains autocatalytic growth of the deposit, the MA ligand hinders the thermal decomposition in the case of Fe(CO)4MA. The heteroleptic precursor Fe(CO)4MA, thus, offers the possibility to suppress contributions of thermal reactions, which can compromise control over the deposit shape and size in FEBID processes.

The Analysis of Leontopodium leontopodioides (Willd.) Beauv. Chemical Composition by GC/MS and UPLC-Q-Orbitrap MS.

Leontopodium leontopodioides (Willd.) Beauv. (L. leontopodioides.) has been used to treat lung diseases in traditional Chinese medicine (TCM). However, a systematic analysis of its chemical components has not been reported so far. In this study, UPLC-Q-Orbitrap MS and GC-MS were applied to investigate the chemical composition of the water extracts and essential oils of L. leontopodioides. UPLC-Q-Orbitrap MS adopts a heating electrospray ionization source, collecting primary and secondary mass spectrometry data in positive and negative ions, respectively, and uses Compound Discoverer 3.2 software to analyze the collected raw data. As a result, a total of 39 compounds were identified from their high-resolution mass spectra in both positive and negative ionization modes, including 13 flavonoids and their glycosides, 15 phenolic acids, 4 oligosaccharides and glycosides, 4 pentacyclic triterpenoids, and 3 other compounds. Among them, 18 chemical components have not been reported in L. leontopodioides. In the GC-MS section, two common organic solvents (n-hexane and diethyl ether) were used to extract essential oils, and the mass spectra were recorded at 70 eV (electron impact) and scanned in the range of 35∼450 m/z. Compounds were identified using NIST (version 2017), and the peak area normalization method was used to calculate their relative amounts. Finally, 17 components were identified in the volatile oil extracted with n-hexane, accounting for 80.38% of the total volatile oil, including monoterpenoids, phenylpropene, fatty acids, and aliphatic hydrocarbons. In the volatile oil extracted with diethyl ether, 16 components were identified, accounting for 73.50% of the total volatile oil, including phenylpropene, aliphatic hydrocarbons, monoterpenoids, fatty acids, and esters. This study was the first to conduct a comprehensive analysis of the chemical composition of the L. leontopodioides water extract and its essential oil, and a comprehensive chemical composition spectrum was constructed, to lay a foundation for its further pharmacodynamic material basis and quality evaluation.

Real-Time PCR Method as Diagnostic Tool for Detection of Periodontal Pathogens in Patients with Periodontitis

The most common type of periodontal disease is chronic periodontitis, an inflammatory condition caused by pathogenic bacteria in subgingival plaque. The aim of our study was the development of a real-time PCR test as a diagnostic tool for the detection and differentiation of five periodontopathogenic bacteria, Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Tannerella forsythia, Prevotella intermedia, and Treponema denticola, in patients with periodontitis. We compared the results of our in-house method with the micro-IDent® semiquantitative commercially available test based on the PCR hybridization method. DNA was isolated from subgingival plaque samples taken from 50 patients and then analyzed by both methods. Comparing the results of the two methods, they show a specificity of 100% for all bacteria. The sensitivity for A. actinomycetemcomitans was 97.5%, for P. gingivalis 96.88%, and for P. intermedia 95.24%. The sensitivity for Tannerella forsythia and T. denticola was 100%. The Spearman correlation factor of two different measurements was 0.976 for A. actinomycetemcomitans, 0.967 for P. gingivalis, 0.949 for P. intermedia, 0.966 for Tannerella forsythia, and 0.917 for T. denticola. In conclusion, the in-house real-time PCR method developed in our laboratory can provide information about relative amount of five bacterial species present in subgingival plaque in patients with periodontitis. It is likely that such a test could be used in dental diagnostics in assessing the efficacy of any treatment to reduce the bacterial burden.

METHANE PRODUCTION FROM COW MANURE IN THE PRESENCE OF Bi(III) COMPLEX OF SULFAMIC ACID

The present study examines the process of biomethanization of cow manure in an anaerobic environment, in the presence of small amounts of Bi(III) complex of sulfamic acid. Since this complex has good antimicrobial activity, the purpose of adding the complex is to determine its effect on biogas and methane production. The reference samples (cow manure only) and mixtures of cow manure + 10 mg and cow manure + 20 mg of bismuth complex with a composition [Bi6O4(OH)4](NH2SO3)6 are subjected to biodegradation under the following conditions – duration of 33 days, nitrogen atmosphere and temperature of 34.5 ± 1°C. During the process, the volume of biogas and the percentage content of methane in biogas are measured in 2 - 3 days as well. The analyses performed reveal that until the 10th day, the amount of biogas produced increases constantly and is comparable both for the control samples and for the mixtures. Further, until the end of the experiment, a significant and constant increase in the volume of biogas produced by the mixtures is observed compared to the control samples.Regarding the percentage of methane produced by the reference samples and the mixtures, comparable relative amounts are found by the 7th day. From the 8th day to the 33rd day, the percentage of methane released by the mixtures is visibly greater than that by the reference samples.

Genome-wide somatic mutation analysis of sinonasal adenocarcinoma with and without wood dust exposure

BackgroundSinonasal adenocarcinoma is a rare cancer, encompassing two different entities, the intestinal-type sinonasal adenocarcinoma (ITAC) and the non-intestinal-type sinonasal adenocarcinoma (non-ITAC). Occurrence of ITAC is strongly associated with exposure to hardwood dusts. In countries with predominant exposure to softwood dust the occurrence of sinonasal adenocarcinomas is lower and the relative amount of non-ITACs to ITACs is higher. The molecular mechanisms behind the tumorigenic effects of wood dust remain largely unknown.MethodsWe carried out whole-genome sequencing of formalin-fixed paraffin-embedded (FFPE) samples of sinonasal adenocarcinomas from ten wood dust-exposed and six non-exposed individuals, with partial tobacco exposure data. Sequences were analyzed for the presence of mutational signatures matching COSMIC database signatures. Driver mutations and CN variant regions were characterized.ResultsMutation burden was higher in samples of wood dust-exposed patients (p = 0.016). Reactive oxygen species (ROS) damage-related mutational signatures were almost exclusively identified in ITAC subtype samples (p = 0.00055). Tobacco smoke mutational signatures were observed in samples of patients with tobacco exposure or missing information, but not in samples from non-exposed patients. A tetraploidy copy number (CN) signature was enriched in ITAC subtype (p = 0.042). CN variation included recurrent gains in COSMIC Cancer Gene Census genes TERT, SDHA, RAC1, ETV1, PCM1, and MYC. Pathogenic variants were observed most frequently in TP53, NF1, CHD2, BRAF, APC, and LRP1B. Driver mutations and copy number gains did not segregate by subtype.ConclusionsOur analysis identified distinct mutational characteristics in ITAC and non-ITAC. Mutational signature analysis may eventually become useful for documentation of occupation-related cancer, while the exact mechanisms behind wood dust-driven carcinogenesis remain elusive. The presence of homologous recombination deficiency signatures implies a novel opportunity for treatment, but further studies are needed.

Abstract PO3-09-03: Dysbiosis of gut microbiota in patients with breast cancer

Abstract [Background] The effects of gut microbiome on various diseases have become widely known, and many studies reported that there was a correlation between the change of gut microbiota, that is dysbiosis, and the progression of digestive tract cancer. In addition, it is well-known that gut microbiota was correlated to the efficacy of immune checkpoint inhibitors for multiple types of cancer. However, the significance of gut microbiota in patients with breast cancer still remains unclear. The aim of this study is to analyze the gut microbiota in patients with breast cancer, compared with healthy women. [Subjects and Methods] We used the pre-treatment feces of 79 patients with primary breast cancer who received treatment at our facility and performed metagenome analysis of the V3-4 region of 16S rDNA. We also analyzed the breast cancer patients' microbiota with QIIME2 analysis method, compared to randomly selected 100 women aged 30-77 years from NIBIOHN's public data . We also assessed the characteristics of the gut microbiota of breast cancer patients by subtypes and its relationship with clinical and pathological factors. [Results] In Japanese gut microbiota, the Firmicutes and Bacteroidetes phyla make up the majority, but Firmicutes was the most common bacterial phylum in 52% of the public cohort, whereas 96.2% (76/79) of the breast cancer patients’ group (BC) showed a significantly higher proportion (p< 0.0001). In addition, ANCOM analysis revealed that the relative bacterial amounts of the Firmicutes, Bacteroidetes, and Proteobacteria phyla were significantly decreased in BC compared to the public cohort (PC), and at the bacterial genus level, the Feacalibacterium genus was significantly decreased in BC. Furthermore, the percentage of Fusobacteria phylum, which is a well-known oral bacteria that exacerbates digestive tract cancer, was 49.3% in BC, compared to 35% in PC (p=0.04). Among BC, the relative frequency of Fusobacteria phylum was significantly higher in the HER2-negative group than in the HER2-positive group (p< 0.0001). In BC, both alpha diversity (p< 0.0001) and beta diversity (p=0.001) were significantly lower than in PC. [Conclusion] An increase in the Firmicutes phylum is known to be associated with obesity, and also likely to affect the incidence risk of breast cancer. The results suggest that the Fusobacteria phylum and Feacalibacterium genus may be risk or preventive factors for breast cancer. Dysbiosis of gut microbiota is suggested to be associated with various diseases, and in this study the decrease in bacterial amount and diversity was observed in BC compared to PC, which may affect the onset and progression of breast cancer. Citation Format: Mai Yamada, Takafumi Morisaki, Yo Sato, Kimihisa Mizoguchi, Yuka Takao, Yurina Ochiai, Yoshiki Ootubo, Saori Hayashi, Masafumi Nakamura, Makoto Kubo. Dysbiosis of gut microbiota in patients with breast cancer [abstract]. In: Proceedings of the 2023 San Antonio Breast Cancer Symposium; 2023 Dec 5-9; San Antonio, TX. Philadelphia (PA): AACR; Cancer Res 2024;84(9 Suppl):Abstract nr PO3-09-03.

The effects of chain-length distributions on starch-related properties in waxy rices

Normal rice starch consists of amylopectin and amylose, whose relative amounts and chain-length distributions (CLDs) are major determinants of the digestibility and rheology of cooked rice, and are related to metabolic health and consumer preference. Here, the mechanism of how molecular structural features of pure amylopectin (waxy) starches affect starch properties was explored. Following debranching, chain-length distributions of seven waxy varieties were measured using size-exclusion chromatography, and parameterized using biosynthesis-based models, which involve breaking up the chain-length distribution into contributions from five enzyme sets covering overlapping ranges of chain length; structure-property correlations involving the fifth set were found to be statistically significant. Digestibility was measured in vitro, and parameters for the slower and longer digestion phase quantified using non-linear least-squares fitting. The coefficient for the significant correlation involving amylopectin fine structure for the fifth set was −0.903, while the amounts of amylopectin short and long chains were found to dominate breakdown viscosity (correlation coefficients 0.801 and − 0.911, respectively). This provides a methodology for finding or developing healthier starch in terms of lower digestion rate, while also having acceptable palatability. As rice breeders can to some extent control CLDs, this can help the development of waxy rices with improved properties.

Changes in the Carotenoids of Zamia dressleri Leaves during Development.

It has been observed that the leaves of some Zamia species undergo a kind of "reverse ripening"; that is, they change from their original brown color to green during development. We assumed that this strange color change was due to the change in carotenoid composition, so we followed the changes for several weeks. The detailed carotenoid composition and content at different stages of development of the leaves was determined with HPLC-DAD focusing on the changes in red and yellow carotenoids. The total and relative amounts of red and yellow carotenoids were determined simultaneously from one measurement from a saponified and/or unsaponified extract. At the beginning of development, the concentration of red carotenoids was higher than that of the yellow ones; it decreased drastically until 22 days and continued to decrease slowly until they completely disappeared. The concentration of yellow carotenoids decreased at the beginning as well, but after 22 days it started to increase. The amount of red carotenoids started to decrease when the leaflet stopped growing. Lutein is the main component in old leaflets, which is not a red carotenoid precursor. Red carotenoids can always be found in their esterified form in the leaves. These findings support the hypothesis that red and yellow carotenoid accumulation are independent and probably have different functions in the leaflet. The strange color change was explained based on the compartmentalization of red and yellow carotenoids and on the changing activity of the enzyme capsanthin-capsorubin synthase responsible for the synthesis of red carotenoids capsorubin and capsanthin.

Preliminary study on the optical diagnosis of orbital rhabdomyosarcoma by Raman spectroscopy

To investigate the Raman spectral features of orbital rhabdomyosarcoma (ORMS) tissue and normal orbital tissue in vitro, and to explore the feasibility of Raman spectroscopy for the optical diagnosis of ORMS. 23 specimens of ORMS and 27 specimens of normal orbital tissue were obtained from resection surgery and measured in vitro using Raman spectroscopy coupled to a fiber optic probe. The important spectral differences between the tissue categories were exploited for tissue classification with the multivariate statistical techniques of principal component analysis (PCA) and linear discriminant analysis (LDA). Compared to normal tissue, the Raman peak intensities located at 1450 and 1655 cm−1 were significantly lower for ORMS (p < 0.05), while the peak intensities located at 721, 758, 1002, 1088, 1156, 1206, 1340, 1526 cm−1 were significantly higher (p < 0.05). Raman spectra differences between normal tissue and ORMS could be attributed to the changes in the relative amounts of biochemical components, such as nucleic acids, tryptophan, phenylalanine, carotenoid and lipids. The Raman spectroscopy technique together with PCA-LDA modeling provides a diagnostic accuracy of 90.0%, sensitivity of 91.3%, and specificity of 88.9% for ORMS identification. Significant differences in Raman peak intensities exist between normal orbital tissue and ORMS. This work demonstrated for the first time that the Raman spectroscopy associated with PCA-LDA diagnostic algorithms has promising potential for accurate, rapid and noninvasive optical diagnosis of ORMS at the molecular level.

The effect of magnesium embedded into NiAPO-11 zeolite on enhancing its catalytic performance of 2-butene skeletal isomerization

The distribution of acidic sites in molecular sieves has a decisive impact on catalytic skeletal isomerization of 2-butene. Accurately adjusting the acidic site to meet high selectivity and stability of the catalyst is crucial. Herein, magnesium embedding into NiAPO-11 zeolite was prepared by static hydrothermal method. The introduction of magnesium increased the proportion of weak Brønsted acid, resulting in a significant enhancement of catalytic activity. When the molar ratio of magnesium to aluminum oxide was 0.2:1, Mg-NiAPO-11 exhibited the best catalytic performance with the conversion of 2-butene being 65.06 % and the selectivity of isobutene being 71.02 %, which was comparable or even better than those reported previously. Furthermore, Mg-NiAPO-11 had good stability. The conversion of 2-butene only decreased by 3 %, while the selectivity of isobutene increased by 8 % during the 72-h reaction. Obviously, it was found that a small amount of carbon deposition led to an increase in the relative amounts of weak Brønsted acid, which resulting in an increase in the selectivity of isobutene. Our work put forward an effective strategy for accurately tuning the acidic sites of molecular sieves to effectively catalyze 2-butene to isobutene.

The Association between Dietary Protein Intake and Sources and the Rate of Longitudinal Changes in Brain Structure.

Few studies have examined dietary protein intake and sources, in combination with longitudinal changes in brain structure markers. Our study aimed to examine the association between dietary protein intake and different sources of dietary protein, with the longitudinal rate of change in brain structural markers. A total of 2723 and 2679 participants from the UK Biobank were separately included in the analysis. The relative and absolute amounts of dietary protein intake were calculated using a 24 h dietary recall questionnaire. The longitudinal change rates of brain structural biomarkers were computed using two waves of brain imaging data. The average interval between the assessments was three years. We utilized multiple linear regression to examine the association between dietary protein and different sources and the longitudinal changes in brain structural biomarkers. Restrictive cubic splines were used to explore nonlinear relationships, and stratified and sensitivity analyses were conducted. Increasing the proportion of animal protein in dietary protein intake was associated with a slower reduction in the total hippocampus volume (THV, β: 0.02524, p < 0.05), left hippocampus volume (LHV, β: 0.02435, p < 0.01) and right hippocampus volume (RHV, β: 0.02544, p < 0.05). A higher intake of animal protein relative to plant protein was linked to a lower atrophy rate in the THV (β: 0.01249, p < 0.05) and LHV (β: 0.01173, p < 0.05) and RHV (β: 0.01193, p < 0.05). Individuals with a higher intake of seafood exhibited a higher longitudinal rate of change in the HV compared to those that did not consume seafood (THV, β: 0.004514; p < 0.05; RHV, β: 0.005527, p < 0.05). In the subgroup and sensitivity analyses, there were no significant alterations. A moderate increase in an individual's intake and the proportion of animal protein in their diet, especially from seafood, is associated with a lower atrophy rate in the hippocampus volume.

Biochemical characterization of acyl-CoA:diacylglycerol acyltransferase2 from the diatom Phaeodactylum tricornutum and its potential effect on LC-PUFAs biosynthesis in planta

BackgroundEicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), belonging to ω-3 long-chain polyunsaturated fatty acids (ω3-LC-PUFAs), are essential components of human diet. They are mainly supplemented by marine fish consumption, although their native producers are oleaginous microalgae. Currently, increasing demand for fish oils is insufficient to meet the entire global needs, which puts pressure on searching for the alternative solutions. One possibility may be metabolic engineering of plants with an introduced enzymatic pathway producing ω3-LC-PUFAs.ResultIn this study we focused on the acyl-CoA:diacylglycerol acyltransferase2b (PtDGAT2b) from the diatom Phaeodactylum tricornutum, an enzyme responsible for triacylglycerol (TAG) biosynthesis via acyl-CoA-dependent pathway. Gene encoding PtDGAT2b, incorporated into TAG-deficient yeast strain H1246, was used to confirm its activity and conduct biochemical characterization. PtDGAT2b exhibited a broad acyl-CoA preference with both di-16:0-DAG and di-18:1-DAG, whereas di-18:1-DAG was favored. The highest preference for acyl donors was observed for 16:1-, 10:0- and 12:0-CoA. PtDGAT2b also very efficiently utilized CoA-conjugated ω-3 LC-PUFAs (stearidonic acid, eicosatetraenoic acid and EPA). Additionally, verification of the potential role of PtDGAT2b in planta, through its transient expression in tobacco leaves, indicated increased TAG production with its relative amount increasing to 8%. Its co-expression with the gene combinations aimed at EPA biosynthesis led to, beside elevated TAG accumulation, efficient accumulation of EPA which constituted even 25.1% of synthesized non-native fatty acids (9.2% of all fatty acids in TAG pool).ConclusionsThis set of experiments provides a comprehensive biochemical characterization of DGAT enzyme from marine microalgae. Additionally, this study elucidates that PtDGAT2b can be used successfully in metabolic engineering of plants designed to obtain a boosted TAG level, enriched not only in ω-3 LC-PUFAs but also in medium-chain and ω-7 fatty acids.

Properties and microstructure evolution of Pisha sandstone after water/alkali leaching

Alkali-activated aluminosilicate minerals for the production of geopolymer building materials provide low-carbon and low-energy advantages compared to OPC. Pisha sandstone (PS) is a mudstone/sandstone rich in silica and aluminium, but it cannot be used directly as an engineering material due to the expansion of soggy clay minerals. In this study, the PS was modified via water and alkali leaching pretreatments, and the modified PS was used to investigate the feasibility of eliminating or attenuating the swelling of montmorillonite, and the alkali activation behavior of the PS system, respectively. The stirring frequency, dosage and types of leaching agent, and leaching time were considered as the variables. The ion concentration of the leachate was characterized using an inductively coupled plasma mass spectrometer (ICP-MS). The modified and untreated PS were characterized using a range of analytical techniques, including particle size analysis, powder XRD, SEM/EDX, TGA, and its free swelling volume in water, as well as the mechanical properties of the specimens prepared as cylinders. The results show that water leaching reduces the particle size of PS, diminishes the span of its particle size distribution, and decreases the relative amount of montmorillonite in PS. Montmorillonite undergoes dissolution/ion exchange under alkali leaching. With increasing alkali concentration and leaching time, the phase changes from Ca-montmorillonite to Na-montmorillonite to glassy phase silica-aluminate. The amorphous N-A-S-H and C-A-S-H coexist in the system, N-A-S-H is the major hydration product. PS is still classified as a material with low pozzolanic activity, as the amount of geopolymer produced in the system is very low. The degree of water-absorption swelling and cracks on the specimen surface induced by the ASR gel deepened with increasing alkali concentration. The involvement of reactive Al and reactive Ca converted the ASR gels into (N,C)-A-S-H gels or C-(A)-S-H gels, which depended on the atomic ratios of these reactive ions, and significantly improved the strength and water resistance of the specimens.

Comparative analysis on growth performance, survival and harvest traits between offspring from wild and mass-selected populations of Crassostrea nippona

Crassostrea nippona has recently been recognized as a preferred alternative to C. gigas in summer due to its firm flesh and high glycogen content. To promote industrial development, the mass selective breeding program was initiated to improve growth performance of C. nippona in 2014. Although a steady genetic gain of approximately 10% for growth traits was achieved in each of the first three generations of the selected strains, little is known about the cumulative genetic progress in desired traits contributed by the selective breeding in the genetic improvement program. In this study, the aquaculture performance of the selected population was comprehensively evaluated by comparing the production performance and reproductive traits of the progeny (WF1 and SF4) from the wild population and the third-generation selected line in commercial farming environments. The results showed that the diameters of eggs from both populations were at similar levels, but the fertilization and hatching rates of the progeny from the selected lines were significantly higher than those of the wild population (P < 0.05). At larval stages, the shell height and cumulative survival rate (CSR) of individuals from SF4 were consistently superior to that of WF1, especially on day 6 post-fertilization, in which CSR of the improved C. nippona was increased by 25.08% compared to that of wild oysters. Meanwhile, a significant 12.10% enhancement in the metamorphosis rate was observed in SF4 when compared with WF1. During the grow-out stage, SF4 displayed distinct advantages in growth performance and survival compared to the wild strain, with 23.19, 33.48, 34.18 and 79.11% improvement in shell height, body weight, CSR and final yield at harvest on day 800, respectively. Meanwhile, relative brood amount (RBA) associated with initial development of offspring was found to be significantly higher in SF4 compared with WF1 (P < 0.05). Remarkably, the gonadal development, sex ratios and biochemical composition of oysters from both populations were at similar levels at final harvest, implying that high-intensity artificial selection had no significant effect on reproductive characteristics and nutritional quality of C. nippona. The encouraging results in the present study suggest that the overall genetic progress contributed by genetic breeding is considerable in the fast-growing strain of C. nippona, and such gains are expected to continue to increase with further selective breeding.

The hydrophilicity mechanism of anatase and rutile (110) TiO2 films based on donor-acceptor complexes

When the surface of TiO2 is exposed to ultraviolet (UV) light, its hydrophilicity increases initially and then contact angle relaxation progresses over time. We investigated the source mechanism and working principles of long-lasting hydrophilicity in an ambient environment. Previously, we reported that the amount of donor-acceptor complexes (DACs) generated by polarizable OH groups with strong charge polarity is critical for maintaining long-lasting hydrophilicity (>90 days) on an anatase surface. In less reactive TiO2 films with low surface energy, a fast relaxation occurs due to the loss of polarizable OH groups. In this research, quantitative four-peak X-ray photoelectron spectroscopy analysis with TiO2 O 1 s spectra surface analysis was used to determine the relative amount of DACs and the binding energy shifting of water adsorbates on single crystal rutile (110) and polycrystalline anatase after UV exposure or plasma treatment. Films treated with oxygen or argon plasma and/or UV were analyzed and compared to suggested mechanisms that can occur on the surface of the TiO2 phase. All treated rutile (110) films except those treated with an Ar plasma exhibited rapid contact angle relaxation during the first 3 days, and the angle increased gradually to >50° over 14 days. In contrast, all anatase films retained long-lasting hydrophilicity, demonstrating a <∼10° contact angle over 56 days. At the first measurement, the binding energies were shifted for rutile (110) treated with O2 plasma and O2 plasma+UV films, demonstrating Ti–OH and DAC values of +0.15 eV each. However, the Ti–OH and DACs of all anatase films were located in the negative binding energy position, indicating that the DACs of rutile (110) were unstable due to a relatively weak bonding. In addition, the IOH/Ibulk intensity ratio of Ti–OH for rutile (110) treated with an O2 plasma increased significantly from 20 % to 37 %. However, the intensity ratio for O2 plasma+UV increased only from 20 % to 23.8 %. This result in combination with the binding energy shifting tendency indicates that relaxed OH groups increased rapidly without UV treatment. When rutile (110) was irradiated with UV, the effect of photoinduced electron-hole pairs shown with Ti 2p spectra was much shorter than that of anatase. Differences in relaxation occurred in both phases due to the charge polarity effect between rutile (110) and anatase, the unstable DACs related to weak OH groups, and the difference in surface characteristics. Using single crystal rutile (110) with a well-defined surface, these experiments validated further the DAC mechanism and theory presented by our group. Specifically, we confirmed that both the amount of DACs and the binding energy position shifting are important for long-term hydrophilicity.

Partitioning genetic structure of a subterranean rodent at multiple spatial scales: accounting for isolation by barriers, distance, and environment

ContextUnderstanding genetic structure at multiple spatial scales and identifying drivers of genetic isolation are important for developing comprehensive conservation plans including for grassland conservation efforts. However, few studies account for multiple genetic isolation processes nor partition genetic variance among these processes.ObjectivesWe assess key processes that can create spatial genetic patterns including isolation by barrier (IBB), isolation by distance (IBD), and isolation by environment (IBE) for a widespread pocket gopher species (Geomys bursarius) and a spatially restricted subspecies (Geomys bursarius illinoensis). We further partition genetic variation to each isolating effect and identify genetic variation that was shared between processes.MethodsWe used seven microsatellites to determine spatial genetic clustering and identify environmental factors impacting genetic similarities. Then, we used redundancy analysis to partition variance explained by IBB, IBD, and IBE.ResultsMajor rivers including the Mississippi River acted as barriers and explained the most genetic variation across the species. In contrast, IBD explained the most genetic variation for G. b. illinoensis. Gophers had genetic associations to soil sand percent and soil color, but IBE uniquely explained a small amount of genetic structure for G. bursarius, with additional variation shared with other isolating processes.ConclusionsGopher genetic structure resulted from barriers, distance, and environmental factors at the species range as well as for a subspecies’ region, but the relative amount of genetic variance assigned to unique isolating processes differed between scales. Delineation of conservation units should consider major rivers as natural boundaries, and finer-scale management should identify and protect areas close to source populations with similar soil friability. Our study exemplifies how analyzing gene flow at rangewide and regional scales can aid managers in developing localized strategies that fit within broader conservation units.