Relative Amounts Research Articles

A Full Accounting of the Visible Mass in SDSS MaNGA Disk Galaxies

We present a study of the ratio of visible mass to total mass in spiral galaxies to better understand the relative amount of dark matter present in galaxies of different masses and evolutionary stages. Using the velocities of the Hα emission line measured in spectroscopic observations from the Sloan Digital Sky Survey (SDSS) MaNGA Data Release 17 (DR 17), we evaluate the rotational velocity of over 5500 disk galaxies at their 90% elliptical Petrosian radii, R 90. We compare this to the velocity expected from the total visible mass, which we compute from the stellar, H i, H2, and heavy metals and dust masses. H2 mass measurements are available for only a small subset of galaxies observed in SDSS MaNGA DR17, so we derive a parameterization of the H2 mass as a function of absolute magnitude in the r band using galaxies observed as part of SDSS DR7. With these parameterizations, we calculate the fraction of visible mass within R 90 that corresponds to the observed velocity. Based on statistically analyzing the likelihood of this fraction, we conclude that the null hypothesis (no dark matter) cannot be excluded at a confidence level better than 95% within the visible extent of the disk galaxies. We also find that when all mass components are included, the ratio of visible to total mass within the visible extent of star-forming disk galaxies increases with galaxy luminosity.

Impact of Ebola virus nucleoprotein on VP40 virus-like particle production: a computational approach

Ebola virus (EBOV) matrix protein VP40 can assemble and bud as virus-like particles (VLPs) when expressed alone in mammalian cells. Nucleoprotein (NP) could be recruited to VLPs as inclusion body (IB) when co-expressed, and increase VLP production. However, the mechanism behind it remains unclear. Here, we use a computational approach to study NP-VP40 interactions. Our simulations indicate that NP may enhance VLP production through stabilizing VP40 filaments and accelerating the VLP budding step. Further, both the relative timing and amount of NP expression compared to VP40 are important for the effective production of IB-containing VLPs. We predict that relative NP/VP40 expression ratio and time are important for efficient production of IB-containing VLPs. We conclude that disrupting the expression timing and amount of NP and VP40 could provide new avenues to treat EBOV infection. This work provides quantitative insights into EBOV proteins interactions and how virion generation and drug efficacy could be influenced.

IMPACT OF QUERCETIN ON PATHOMORPHOLOGICAL CHARACTERISTICS OF MANDIBULAR BONE IN RATS FOLLOWING ITS FRACTURE UNDER CHRONIC ALCOHOL INTOXICATION

This study aims at investigating the impact of water-soluble form of quercetin on the pathomorphological characteristics of the mandibular bone in rats following its incomplete fracture under chronic alcohol intoxication was investigated. Fourteen white male Wistar rats weighing 190-240 g were randomly divided into two groups: Group 1 comprised rats with incomplete mandibular fractures under chronic alcohol intoxication; animals in Group 2 received daily intraperitoneal injections of water-soluble quercetin (corvitin) in a dose of 10 mg/kg of quercetin for 14 days following the injury induction. It has been shown that chronic alcohol intoxication hinders reparative regeneration of bone tissue after an incomplete mandibular fracture, and is accompanied by a decrease in the relative amount of reticulofibrous bone tissue and fibroblastic cellular elements at the injury site, especially mature fibroblasts, as well as by delayed maturation of granulation tissue. Under experimental conditions, quercetin administration significantly contributed to normalizing the regenerative process by the 14th day of the posttraumatic period. This normalization was evidenced by increased relative amounts of reticulofibrous bone tissue, prevalence of fibroblastic cells in granulation tissue, and accelerated formation of the regenerate blood microcirculatory channel.

A Genetically Encoded Fluorescent Heme Sensor Detects Free Heme in Plants.

Heme is produced in plants via a plastid-localized metabolic pathway and is subsequently distributed to all cellular compartments. In addition to covalently and non-covalently bound heme, a comparatively small amount of free heme that is not associated with protein is available for incorporation into heme-dependent proteins in all subcellular compartments and for regulatory purposes. This "labile" fraction may also be toxic. To date, the distribution of the free heme pool in plant cells remains poorly understood. Several fluorescence-based methods for the quantification of intracellular free heme have been described. For this study, we used the previously described genetically encoded heme sensor 1 (HS1) to measure the relative amounts of heme in different plant subcellular compartments. In a proof of concept, we manipulated heme content using a range of biochemical and genetic approaches and verified the utility of HS1 in different cellular compartments of Arabidopsis (Arabidopsis thaliana) and tobacco (N. tabacum and N. benthamiana) plants transformed either transiently or stably with HS1 and HS1(M7A), a variant with lower affinity for heme. This approach makes it possible to trace the distribution and dynamics of free heme and provides relevant information about its mobilization. The application of these heme sensors will create opportunities to explore and validate the importance of free heme in plant cells and to identify mutants that alter the subcellular allocation of free heme.

Insights into the Electrocatalytic Activity of Fe,N-Glucose/Carbon Nanotube Hybrids for the Oxygen Reduction Reaction

Glucose-derived carbon hybrids were synthesized by hydrothermal treatment in the presence of oxidized carbon nanotubes. Additionally, iron and nitrogen functionalities were incorporated into the carbon structure using different methodologies. The introduction of iron and nitrogen in a single step under a H2 atmosphere favored the formation of quaternary nitrogen and oxidized nitrogen, whereas the incorporation of nitrogen under an N2 atmosphere after doping the hybrids with iron mainly produced pyridinic nitrogen. The samples were characterized by scanning electron microscopy, X-ray spectroscopy, adsorption isotherms, inductively coupled plasma optical emission spectrometry, and Raman spectroscopy. The presence of iron and nitrogen in the carbons increases the onset potential toward oxygen reduction in KOH 0.1 mol L−1 by 130 mV (0.83 V), in comparison to carbonized glucose, whereas the reaction mechanism shifts closer to a direct pathway and the formation of HO2− decreases to 25% (3.5 electrons). The reaction rate also increased in comparison to the carbonized glucose, as observed by the decrease in the Tafel slope value from 117 to 61 mV dec−1. Furthermore, the incorporation of iron and nitrogen in a single step enhanced the short-term performance of the prepared electrocatalysts, which may also be due to the higher relative amount of quaternary nitrogen.

Resistance of Beeswax to Organic Solvents from a Conservator’s Perspective

ABSTRACT The use of organic solvents considerably widens the possibilities for the conservation treatment of historic beeswax artifacts, e.g. the choice of effective cleaning methods, adhesives, consolidants, and varnishes. However, their use should always be considered carefully, since most of them dissolve at least some components of the original material. In an attempt to help conservators make well-informed decisions in this respect, the interactions of selected organic solvents with beeswax under various conditions were studied. Besides the importance of solvent type, the most carefully studied aspects were the effect of temperature, exposure duration, and the relative amount of solvent used. The surface action of the solvents on beeswax was monitored by optical microscopy, and the dissolved fraction of the individual components of beeswax was measured both quantitatively, using gravimetry, and qualitatively, using the GC-MS method. It was confirmed that all of the selected organic solvents dissolve beeswax to a certain extent. The authors believe, however, that by optimizing working conditions, the use of some of these solvents can be relatively safe and justifiable in many situations.

Spatial detection of mitochondrial DNA and RNA in tissues.

Mitochondrial health has gained attention in a number of diseases, both as an indicator of disease state and as a potential therapeutic target. The quality and amount of mitochondrial DNA (mtDNA) and RNA (mtRNA) can be important indicators of mitochondrial and cell health, but are difficult to measure in complex tissues. mtDNA and mtRNA in zebrafish retina samples were fluorescently labeled using RNAscope™ in situ hybridization, then mitochondria were stained using immunohistochemistry. Pretreatment with RNase was used for validation. Confocal images were collected and analyzed, and relative amounts of mtDNA and mtRNA were reported. Findings regarding mtDNA were confirmed using qPCR. Signals from probes detecting mtDNA and mtRNA were localized to mitochondria, and were differentially sensitive to RNase. This labeling strategy allows for quantification of relative mtDNA and mtRNA levels in individual cells. As a demonstration of the method in a complex tissue, single photoreceptors in zebrafish retina were analyzed for mtDNA and mtRNA content. An increase in mtRNA but not mtDNA coincides with proliferation of mitochondria at night in cones. A similar trend was measured in rods. Mitochondrial gene expression is an important component of cell adaptations to disease, stress, or aging. This method enables the study of mtDNA and mtRNA in single cells of an intact, complex tissue. The protocol presented here uses commercially-available tools, and is adaptable to a range of species and tissue types.

Enhancing the Activity of a Carbon Nitride Photocatalyst by Constructing a Triazine-Heptazine Homojunction.

Establishing homojunctions at the molecular level between different but physicochemically similar phases belonging to the same family of materials is an effective approach to promoting the photocatalytic activity of polymeric carbon nitride (CN) materials. Here, we prepared a CN material with a uniform distribution of homojunctions by combining two synthetic strategies: supramolecular assemblies as the precursor and molten salt as the medium. We designed porous CN rods with triazine-heptazine homojunctions (THCNs) using a melem supramolecular aggregate (Me) and melamine as the precursors and a KCl/LiBr salt mixture as the liquid reaction medium. The triazine/heptazine ratio is controlled by varying the relative amounts of the chosen precursors, and the molten salt treatment enhances the structural order of the interplanar packing units for the THCN skeleton, leading to rapid charge migration. The resulting built-in electric field induced by the triazine-heptazine homojunction enhances photogenerated charge separation; the optimal THCN catalyst exhibits an excellent H2 evolution rate via photocatalytic water splitting, which is ∼24 times as high as that of reference bulk CN, with long-term stability.

Reaction Mechanism of Hydrogen Generation and Nitrogen Fixation at Carbon Nitride/Double Perovskite Heterojunctions

Photocatalytically active heterojunctions based on metal halide perovskites (MHPs) are drawing significant interest for their chameleon ability to foster several redox reactions. The lack of mechanistic insights into their performance, however, limits the ability of engineering novel and optimized materials. Herein, a report is made on a composite system including a double perovskite, Cs2AgBiCl6/g‐C3N4, used in parallel for solar‐driven hydrogen generation and nitrogen reduction, quantified by a rigorous analytical approach. The composite efficiently promotes the two reactions, but its activity strongly depends on the perovskite/carbon nitride relative amounts. Through advanced spectroscopic investigation and density function theory (DFT) modeling the H2 and NH3 production reaction mechanisms are studied, finding perovskite halide vacancies as the primary reactive sites for hydrogen generation together with a positive contribution of low loaded g‐C3N4 in reducing carrier recombination. For nitrogen reduction, instead, the active sites are g‐C3N4 nitrogen vacancies, and the heterojunction best performs at low perovskites loadings where the composites maximize light absorption and reduce carrier losses. It is believed that these insights are important add‐ons toward universal exploitation of MHPs in contemporary photocatalysis.

Reduction of Ferric Chloride in Yeast Growth Media, by Sugars and Aluminum

Iron compounds can be used in antimicrobial applications by exploiting the toxicity of divalent iron to living organisms due to the Fenton reaction. In this study, the growth inhibitory effects of ferrous sulfate FeSO4·7H2O and ferric chloride FeCl3·6H2O were observed on Metschnikowia clade and Saccharomyces cerevisiae yeast cells. The relatively high amount of reduced Fe3+ to Fe2+ in the growth medium determined by Mössbauer spectroscopy may contribute to the antimicrobial activity of ferric chloride. In order to test the reducing ability of sugars in the growth media of yeasts, the reaction of ferric chloride FeCl3·6H2O with sugars was investigated. In mixtures of FeCl3·6H2O and fructose, approximately two thirds of Fe3+ can be reduced to Fe2+. When the mixture of FeCl3·6H2O and fructose is placed on the surface of aluminum foil, an iron film is formed on the surface of the aluminum due to the reduction by both fructose and aluminum. The relative amount of Fe3+ which was reduced to Fe0 reached 68%.

Evaluation of lauric acid enhancement of black soldier fly larvae from coconut.

The current study evaluated the potential enhancement of lauric acid (LA) in black soldier fly, Hermetia illucens, (L.) (Diptera: Stratiomyidae) larvae (BSFL), a source of this short-chain fatty acid which has antimicrobial and immunostimulatory properties. Replicate groups of BSFL were reared on either the coconut or Gainesville diet for 7 days. After the rearing period, BSFL were harvested, purged, dried, and subjected to proximate, fatty acid and amino acid compositions, and pepsin digestibility analyses. Results demonstrate changes in proximate composition. BSFL reared on the coconut had significantly (P = 0.002) higher lipid content (47.3% vs. 25.2%) on a dry-matter basis. The LA concentration in BSFL produced on the coconut was 31% greater than those reared on Gainesville, resulting in almost 150% more LA. Furthermore, BSFL-fed coconut had reduced crude protein (29.7% of dry weight) and ash (3.7% of dry weight) relative to those fed Gainesville (43.4% and 7.5% for crude protein and ash, respectively) but higher pepsin digestibility (91.0% vs. 87.0%). The relative amounts of various amino acids in the 2 BSFL meals did not differ extensively, with statistically lower concentrations of only phenylalanine and tryptophan and higher concentrations of alanine, arginine, isoleucine, leucine, and serine in BSFL reared on coconut. Results demonstrate that the nutritional composition of BSFL can be manipulated, and an enhancement of LA concentrations of 150% was achieved with coconut, which has value for BSFL as a feed for various livestock, including aquaculture. Lower protein content is a tradeoff in terms of BSFL value as a feed additive.

Electron-induced deposition using Fe(CO)4MA and Fe(CO)5 - effect of MA ligand and process conditions.

The electron-induced decomposition of Fe(CO)4MA (MA = methyl acrylate), which is a potential new precursor for focused electron beam-induced deposition (FEBID), was investigated by surface science experiments under UHV conditions. Auger electron spectroscopy was used to monitor deposit formation. The comparison between Fe(CO)4MA and Fe(CO)5 revealed the effect of the modified ligand architecture on the deposit formation in electron irradiation experiments that mimic FEBID and cryo-FEBID processes. Electron-stimulated desorption and post-irradiation thermal desorption spectrometry were used to obtain insight into the fate of the ligands upon electron irradiation. As a key finding, the deposits obtained from Fe(CO)4MA and Fe(CO)5 were surprisingly similar, and the relative amount of carbon in deposits prepared from Fe(CO)4MA was considerably less than the amount of carbon in the MA ligand. This demonstrates that electron irradiation efficiently cleaves the neutral MA ligand from the precursor. In addition to deposit formation by electron irradiation, the thermal decomposition of Fe(CO)4MA and Fe(CO)5 on an Fe seed layer prepared by EBID was compared. While Fe(CO)5 sustains autocatalytic growth of the deposit, the MA ligand hinders the thermal decomposition in the case of Fe(CO)4MA. The heteroleptic precursor Fe(CO)4MA, thus, offers the possibility to suppress contributions of thermal reactions, which can compromise control over the deposit shape and size in FEBID processes.

The Analysis of Leontopodium leontopodioides (Willd.) Beauv. Chemical Composition by GC/MS and UPLC-Q-Orbitrap MS.

Leontopodium leontopodioides (Willd.) Beauv. (L. leontopodioides.) has been used to treat lung diseases in traditional Chinese medicine (TCM). However, a systematic analysis of its chemical components has not been reported so far. In this study, UPLC-Q-Orbitrap MS and GC-MS were applied to investigate the chemical composition of the water extracts and essential oils of L. leontopodioides. UPLC-Q-Orbitrap MS adopts a heating electrospray ionization source, collecting primary and secondary mass spectrometry data in positive and negative ions, respectively, and uses Compound Discoverer 3.2 software to analyze the collected raw data. As a result, a total of 39 compounds were identified from their high-resolution mass spectra in both positive and negative ionization modes, including 13 flavonoids and their glycosides, 15 phenolic acids, 4 oligosaccharides and glycosides, 4 pentacyclic triterpenoids, and 3 other compounds. Among them, 18 chemical components have not been reported in L. leontopodioides. In the GC-MS section, two common organic solvents (n-hexane and diethyl ether) were used to extract essential oils, and the mass spectra were recorded at 70 eV (electron impact) and scanned in the range of 35∼450 m/z. Compounds were identified using NIST (version 2017), and the peak area normalization method was used to calculate their relative amounts. Finally, 17 components were identified in the volatile oil extracted with n-hexane, accounting for 80.38% of the total volatile oil, including monoterpenoids, phenylpropene, fatty acids, and aliphatic hydrocarbons. In the volatile oil extracted with diethyl ether, 16 components were identified, accounting for 73.50% of the total volatile oil, including phenylpropene, aliphatic hydrocarbons, monoterpenoids, fatty acids, and esters. This study was the first to conduct a comprehensive analysis of the chemical composition of the L. leontopodioides water extract and its essential oil, and a comprehensive chemical composition spectrum was constructed, to lay a foundation for its further pharmacodynamic material basis and quality evaluation.

Real-Time PCR Method as Diagnostic Tool for Detection of Periodontal Pathogens in Patients with Periodontitis.

The most common type of periodontal disease is chronic periodontitis, an inflammatory condition caused by pathogenic bacteria in subgingival plaque. The aim of our study was the development of a real-time PCR test as a diagnostic tool for the detection and differentiation of five periodontopathogenic bacteria, Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Tannerella forsythia, Prevotella intermedia, and Treponema denticola, in patients with periodontitis. We compared the results of our in-house method with the micro-IDent® semiquantitative commercially available test based on the PCR hybridization method. DNA was isolated from subgingival plaque samples taken from 50 patients and then analyzed by both methods. Comparing the results of the two methods, they show a specificity of 100% for all bacteria. The sensitivity for A. actinomycetemcomitans was 97.5%, for P. gingivalis 96.88%, and for P. intermedia 95.24%. The sensitivity for Tannerella forsythia and T. denticola was 100%. The Spearman correlation factor of two different measurements was 0.976 for A. actinomycetemcomitans, 0.967 for P. gingivalis, 0.949 for P. intermedia, 0.966 for Tannerella forsythia, and 0.917 for T. denticola. In conclusion, the in-house real-time PCR method developed in our laboratory can provide information about relative amount of five bacterial species present in subgingival plaque in patients with periodontitis. It is likely that such a test could be used in dental diagnostics in assessing the efficacy of any treatment to reduce the bacterial burden.

METHANE PRODUCTION FROM COW MANURE IN THE PRESENCE OF Bi(III) COMPLEX OF SULFAMIC ACID

The present study examines the process of biomethanization of cow manure in an anaerobic environment, in the presence of small amounts of Bi(III) complex of sulfamic acid. Since this complex has good antimicrobial activity, the purpose of adding the complex is to determine its effect on biogas and methane production. The reference samples (cow manure only) and mixtures of cow manure + 10 mg and cow manure + 20 mg of bismuth complex with a composition [Bi6O4(OH)4](NH2SO3)6 are subjected to biodegradation under the following conditions – duration of 33 days, nitrogen atmosphere and temperature of 34.5 ± 1°C. During the process, the volume of biogas and the percentage content of methane in biogas are measured in 2 - 3 days as well. The analyses performed reveal that until the 10th day, the amount of biogas produced increases constantly and is comparable both for the control samples and for the mixtures. Further, until the end of the experiment, a significant and constant increase in the volume of biogas produced by the mixtures is observed compared to the control samples.Regarding the percentage of methane produced by the reference samples and the mixtures, comparable relative amounts are found by the 7th day. From the 8th day to the 33rd day, the percentage of methane released by the mixtures is visibly greater than that by the reference samples.

Genome-wide somatic mutation analysis of sinonasal adenocarcinoma with and without wood dust exposure

BackgroundSinonasal adenocarcinoma is a rare cancer, encompassing two different entities, the intestinal-type sinonasal adenocarcinoma (ITAC) and the non-intestinal-type sinonasal adenocarcinoma (non-ITAC). Occurrence of ITAC is strongly associated with exposure to hardwood dusts. In countries with predominant exposure to softwood dust the occurrence of sinonasal adenocarcinomas is lower and the relative amount of non-ITACs to ITACs is higher. The molecular mechanisms behind the tumorigenic effects of wood dust remain largely unknown.MethodsWe carried out whole-genome sequencing of formalin-fixed paraffin-embedded (FFPE) samples of sinonasal adenocarcinomas from ten wood dust-exposed and six non-exposed individuals, with partial tobacco exposure data. Sequences were analyzed for the presence of mutational signatures matching COSMIC database signatures. Driver mutations and CN variant regions were characterized.ResultsMutation burden was higher in samples of wood dust-exposed patients (p = 0.016). Reactive oxygen species (ROS) damage-related mutational signatures were almost exclusively identified in ITAC subtype samples (p = 0.00055). Tobacco smoke mutational signatures were observed in samples of patients with tobacco exposure or missing information, but not in samples from non-exposed patients. A tetraploidy copy number (CN) signature was enriched in ITAC subtype (p = 0.042). CN variation included recurrent gains in COSMIC Cancer Gene Census genes TERT, SDHA, RAC1, ETV1, PCM1, and MYC. Pathogenic variants were observed most frequently in TP53, NF1, CHD2, BRAF, APC, and LRP1B. Driver mutations and copy number gains did not segregate by subtype.ConclusionsOur analysis identified distinct mutational characteristics in ITAC and non-ITAC. Mutational signature analysis may eventually become useful for documentation of occupation-related cancer, while the exact mechanisms behind wood dust-driven carcinogenesis remain elusive. The presence of homologous recombination deficiency signatures implies a novel opportunity for treatment, but further studies are needed.

Temporal Changes in Innate and Adaptive Immunity During Sepsis as Determined by ELISpot.

The inability to evaluate host immunity in a rapid quantitative manner in patients with sepsis has severely hampered development of novel immune therapies. The ELISpot assay is a functional bioassay that measures the number of cytokine-secreting cells and the relative amount of cytokine produced at the single-cell level. A key advantage of ELISpot is its excellent dynamic range enabling a more precise quantifiable assessment of host immunity. Herein, we tested the hypothesis that the ELISpot assay can detect dynamic changes in both innate and adaptive immunity as they often occur during sepsis. We also tested whether ELISpot could detect the effect of immune drug therapies to modulate innate and adaptive immunity. Mice were made septic using sublethal cecal ligation and puncture (CLP). Blood and spleens were harvested serially and ex vivo IFN-γ and TNF-α production were compared by ELISpot and ELISA. The capability of ELISpot to detect changes in innate and adaptive immunity due to in vivo immune therapy with dexamethasone, IL-7, and arginine was also evaluated. ELISpot confirmed a decreased innate and adaptive immunity responsiveness during sepsis progression. More importantly, ELISpot was also able to detect changes in adaptive and innate immunity in response to immune-modulatory reagents, for example dexamethasone, arginine, and IL-7 in a readily quantifiable manner, as predicted by the reagents known mechanisms of action. ELISpot and ELISA results tended to parallel one another although some differences were noted. ELISpot offers a unique capability to assess the functional status of both adaptive and innate immunity over time. The results presented herein demonstrate that ELISpot can also be used to detect and follow the in vivo effects of drugs to ameliorate sepsis-induced immune dysfunction. This capability would be a major advance in guiding new immune therapies in sepsis.

Abstract PO3-09-03: Dysbiosis of gut microbiota in patients with breast cancer

Abstract [Background] The effects of gut microbiome on various diseases have become widely known, and many studies reported that there was a correlation between the change of gut microbiota, that is dysbiosis, and the progression of digestive tract cancer. In addition, it is well-known that gut microbiota was correlated to the efficacy of immune checkpoint inhibitors for multiple types of cancer. However, the significance of gut microbiota in patients with breast cancer still remains unclear. The aim of this study is to analyze the gut microbiota in patients with breast cancer, compared with healthy women. [Subjects and Methods] We used the pre-treatment feces of 79 patients with primary breast cancer who received treatment at our facility and performed metagenome analysis of the V3-4 region of 16S rDNA. We also analyzed the breast cancer patients' microbiota with QIIME2 analysis method, compared to randomly selected 100 women aged 30-77 years from NIBIOHN's public data . We also assessed the characteristics of the gut microbiota of breast cancer patients by subtypes and its relationship with clinical and pathological factors. [Results] In Japanese gut microbiota, the Firmicutes and Bacteroidetes phyla make up the majority, but Firmicutes was the most common bacterial phylum in 52% of the public cohort, whereas 96.2% (76/79) of the breast cancer patients’ group (BC) showed a significantly higher proportion (p< 0.0001). In addition, ANCOM analysis revealed that the relative bacterial amounts of the Firmicutes, Bacteroidetes, and Proteobacteria phyla were significantly decreased in BC compared to the public cohort (PC), and at the bacterial genus level, the Feacalibacterium genus was significantly decreased in BC. Furthermore, the percentage of Fusobacteria phylum, which is a well-known oral bacteria that exacerbates digestive tract cancer, was 49.3% in BC, compared to 35% in PC (p=0.04). Among BC, the relative frequency of Fusobacteria phylum was significantly higher in the HER2-negative group than in the HER2-positive group (p< 0.0001). In BC, both alpha diversity (p< 0.0001) and beta diversity (p=0.001) were significantly lower than in PC. [Conclusion] An increase in the Firmicutes phylum is known to be associated with obesity, and also likely to affect the incidence risk of breast cancer. The results suggest that the Fusobacteria phylum and Feacalibacterium genus may be risk or preventive factors for breast cancer. Dysbiosis of gut microbiota is suggested to be associated with various diseases, and in this study the decrease in bacterial amount and diversity was observed in BC compared to PC, which may affect the onset and progression of breast cancer. Citation Format: Mai Yamada, Takafumi Morisaki, Yo Sato, Kimihisa Mizoguchi, Yuka Takao, Yurina Ochiai, Yoshiki Ootubo, Saori Hayashi, Masafumi Nakamura, Makoto Kubo. Dysbiosis of gut microbiota in patients with breast cancer [abstract]. In: Proceedings of the 2023 San Antonio Breast Cancer Symposium; 2023 Dec 5-9; San Antonio, TX. Philadelphia (PA): AACR; Cancer Res 2024;84(9 Suppl):Abstract nr PO3-09-03.

Triplex steel powder design to avoid hot cracking in laser-powder bed fusion using computational thermodynamics

High manganese steels offer exceptional combinations of high strength and ductility, resulting in weight reduction when utilized in structural applications. Nevertheless, the conventional manufacturing routes of these steels is hindered by many production problems. Additive Manufacturing (AM) has emerged as a reliable solution to fabricate thin or complex shape compounds using these steel grades. Indeed, several studies have demonstrated the success to fabricate high manganese twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) steels by laser-powder bed fusion (L-PBF). However, a recent study on a high manganese triplex steel composition has revealed the occurrence of both hot cracking and micro segregation during rapid solidification in L-PBF, highlighting potential processability issues of this family of high alloy steels. In this study, the hot cracking susceptibility of different triplex steels is evaluated, focusing on the impact of the composition on the solidification paths and final microstructures. A Computer Coupling of Phase Diagrams and Thermochemistry (CALPHAD) approach is employed to predict alloy-dependent hot cracking susceptibility so as to establish guidelines for preventing hot cracking and provide insights into alloy design for AM. Microstructural observations are used to determine the accuracy of CALPHAD predictions in terms of elemental segregation, phase formation and hot cracking susceptibility. To this end, scanning transmission electron microscopy is used to evaluate elemental segregation at grain boundaries, while the local distribution of phases and their relative amount is measured by electron backscattered and X-ray diffraction, respectively. Hot cracking susceptibility is experimentally evaluated by measuring the length of cracks (when present) in the cross section of printed specimens.

The effects of chain-length distributions on starch-related properties in waxy rices

Normal rice starch consists of amylopectin and amylose, whose relative amounts and chain-length distributions (CLDs) are major determinants of the digestibility and rheology of cooked rice, and are related to metabolic health and consumer preference. Here, the mechanism of how molecular structural features of pure amylopectin (waxy) starches affect starch properties was explored. Following debranching, chain-length distributions of seven waxy varieties were measured using size-exclusion chromatography, and parameterized using biosynthesis-based models, which involve breaking up the chain-length distribution into contributions from five enzyme sets covering overlapping ranges of chain length; structure-property correlations involving the fifth set were found to be statistically significant. Digestibility was measured in vitro, and parameters for the slower and longer digestion phase quantified using non-linear least-squares fitting. The coefficient for the significant correlation involving amylopectin fine structure for the fifth set was −0.903, while the amounts of amylopectin short and long chains were found to dominate breakdown viscosity (correlation coefficients 0.801 and − 0.911, respectively). This provides a methodology for finding or developing healthier starch in terms of lower digestion rate, while also having acceptable palatability. As rice breeders can to some extent control CLDs, this can help the development of waxy rices with improved properties.