Regulate Cell Behavior Research Articles

Topographic Cues Guiding Cell Polarization via Distinct Cellular Mechanosensing Pathways.

Cell polarization exists in a variety of tissues to regulate cell behaviors and functions. Space constraint (spatially limiting cell extension) and adhesion induction (guiding adhesome growth) are two main ways to induce cell polarization according to the microenvironment topographies. However, the mechanism of cell polarization induced by these two ways and the downstream effects on cell functions are yet to be understood. Here, space constraint and adhesion induction guiding cell polarization are achieved by substrate groove arrays in micro and nano size, respectively. Although the morphology of polarized cells is similar on both structures, the signaling pathways to induce the cell polarization and the downstream functions are distinctly different. The adhesion induction (nano-groove) leads to the formation of focal adhesions and activates the RhoA/ROCK pathway to enhance the myosin-based intracellular force, while the space constraint (micro-groove) only activates the formation of pseudopodia. The enhanced intracellular force caused by adhesion induction inhibits the chromatin condensation, which promotes the osteogenic differentiation of stem cells. This study presents an overview of cell polarization and mechanosensing at biointerface to aid in the design of novel biomaterials.

An Optogenetic Tool to Raise Intracellular pH in Single Cells and Drive Localized Membrane Dynamics

Intracellular pH (pHi) dynamics are critical for regulating normal cell physiology. For example, transient increases in pHi (7.2–7.6) regulate cell behaviors like cell polarization, actin cytoskeleton remodeling, and cell migration. Most studies on pH-dependent cell behaviors have been performed at the population level and use nonspecific methods to manipulate pHi. The lack of tools to specifically manipulate pHi at the single-cell level has hindered investigation of the role of pHi dynamics in driving single cell behaviors. In this work, we show that Archaerhodopsin (ArchT), a light-driven outward proton pump, can be used to elicit robust and physiological pHi increases over the minutes time scale. We show that activation of ArchT is repeatable, enabling the maintenance of high pHi in single cells for up to 45 minutes. We apply this spatiotemporal pHi manipulation tool to determine whether increased pHi is a sufficient driver of membrane ruffling in single cells. Using the ArchT tool, we show that increased pHi in single cells can drive localized membrane ruffling responses within seconds and increased membrane dynamics (both protrusion and retraction events) compared to unstimulated ArchT cells as well as control cells. Overall, this tool allows us to directly investigate the relationship between increased pHi and single cell behaviors such as membrane ruffling. This tool will be transformative in facilitating experiments that are required to determine roles for increased pHi in driving single cell behaviors.

Tissue Engineering Meets Nanotechnology: Molecular Mechanism Modulations in Cornea Regeneration

Nowadays, tissue engineering is one of the most promising approaches for the regeneration of various tissues and organs, including the cornea. However, the inability of biomaterial scaffolds to successfully integrate into the environment of surrounding tissues is one of the main challenges that sufficiently limits the restoration of damaged corneal tissues. Thus, the modulation of molecular and cellular mechanisms is important and necessary for successful graft integration and long-term survival. The dynamics of molecular interactions affecting the site of injury will determine the corneal transplantation efficacy and the post-surgery clinical outcome. The interactions between biomaterial surfaces, cells and their microenvironment can regulate cell behavior and alter their physiology and signaling pathways. Nanotechnology is an advantageous tool for the current understanding, coordination, and directed regulation of molecular cell–transplant interactions on behalf of the healing of corneal wounds. Therefore, the use of various nanotechnological strategies will provide new solutions to the problem of corneal allograft rejection, by modulating and regulating host–graft interaction dynamics towards proper integration and long-term functionality of the transplant.

New Method for Preparing Small-Caliber Artificial Blood Vessel with Controllable Microstructure on the Inner Wall Based on Additive Material Composite Molding.

The diameter of most blood vessels in cardiovascular and peripheral vascular system is less than 6 mm. Because the inner diameter of such vessels is small, a built-in stent often leads to thrombosis and other problems. It is an important goal to replace it directly with artificial vessels. This paper creatively proposed a preparation method of a small-diameter artificial vascular graft which can form a controllable microstructure on the inner wall and realize a multi-material composite. On the one hand, the inner wall of blood vessels containing direct writing structure is constructed by electrostatic direct writing and micro-imprinting technology to regulate cell behavior and promote endothelialization; on the other hand, the outer wall of blood vessels was prepared by electrospinning PCL to ensure the stability of mechanical properties of composite grafts. By optimizing the key parameters of the graft, a small-diameter artificial blood vessel with controllable microstructure on the inner wall is finally prepared. The corresponding performance characterization experimental results show that it has advantages in structure, mechanical properties, and promoting endothelialization.

Pulsed Electrical Stimulation Enhances Consistency of Directional Migration of Adipose-Derived Stem Cells.

Electrical stimulation is a well-known strategy for regulating cell behavior, both in pathological and physiological processes such as wound healing, tissue regeneration, and embryonic development. Electrotaxis is the directional migration of cells toward the cathode or anode when subjected to electrical stimulation. In this study, we investigated the conditions for enhanced directional migration of electrically stimulated adipose-derived stem cells (ADSCs) during prolonged culture, using a customized agar-salt electrotaxis chamber. Exposure of ADSCs to a 1200 μA electric current for 3 h, followed by cessation of stimulation for 6 h and resumed stimulation for a further 3 h, increased directional cell migration toward the anode without inducing cell death. Moreover, Golgi polarization maintained the direction of polarity parallel to the direction of cell movement. Herein, we demonstrated that a pulsed electric current is sufficient to trigger directional migration of ADSCs in long-term culture while maintaining cell viability.

Self-Assembly of Dendritic DNA into a Hydrogel: Application in Three-Dimensional Cell Culture.

With inherent biocompatibility, biodegradability, and unique programmability, hydrogels with a DNA framework show great potential in three-dimensional (3D) cell culture. Here, a DNA hydrogel was assembled by a dendritic DNA with four branches. The hydrogel showed tunable mechanical strength and reversible thixotropy even under a nanomolar DNA concentration. The cell culture medium can be converted into the hydrogel isothermally at physiological temperature. This DNA hydrogel allows both cancer and somatic cells to be seeded in situ and to achieve high proliferation and viability. The bis-entity of dendritic branches enabled the specific loading of bioactive clues to regulate cell behaviors. Thus, the dendritic DNA-assembled hydrogel could serve as a highly biocompatible, readily functionalizing, and easy-casting gel platform for 3D cell culture.

Magnetic Field-Guided MoS2/WS2 Heterolayered Nanofilm Regulates Cell Behavior and Gene Expression

Magnetic Field-Guided MoS₂/WS₂ Heterolayered Nanofilm Regulates Cell Behavior and Gene Expression

MiR-873-5p targets THUMPD1 to inhibit gastric cancer cell behavior and chemoresistance.

Gastric cancer is one of the most common gastrointestinal tumors. Evidence has pointed to the fact that miRNAs play critical roles in the occurrence, development, and metastasis of gastric cancer by regulating cell proliferation, differentiation, apoptosis, and invasion. In this study, first the relationship of miR-873-5p level and tissues types/LN(+/-)/metastasis(+/-)/tumor size was analysis, respectively. Second, the CCK8 and Transwell assay was used to determine the proliferation, invasion and migration of GC cells transfected with overexpression-/low expression-miR-873-5p. Third, the cell viability were analysis in the GC cells transfected with overexpression-/low expression-miR-873-5p treatment with different chemotherapy drugs. Fourth, the target gene of miR-873-5p was predicted using bioinformation methods. Fifth, the relationship of miR-873-5p with target gene-THUMPD1 were explored by using Wb and luciferase activity assay, et al. We confirmed that miR-873-5p was negatively correlated with GC including tumor size, LN metastasis, distant metastasis. The miR-873-5p enhanced the sensitivity of Doxorubicin/Fluorouracil and cisplatin. The THUMPD1 was the target gene of miR-873-5p. Moreover, miR-873-5p could target the THUMPD1 axis so as to inhibit gastric cancer cell behavior as well as chemoresistance. MiR-873-5p plays a role in regulating cell behavior as well as regulating chemoresistance in gastric cancer. In addition, THUMPD1, as a downstream molecule of miR-873-5p, plays an important role in the cell behavior and chemoresistance of gastric cancer. The research first confirmed that miR-873-5p could inhibit gastric cancer cell behavior and chemoresistance by targeting the THUMPD1.

Porous Nanomaterials Targeting Autophagy in Bone Regeneration.

Porous nanomaterials (PNMs) are nanosized materials with specially designed porous structures that have been widely used in the bone tissue engineering field due to the fact of their excellent physical and chemical properties such as high porosity, high specific surface area, and ideal biodegradability. Currently, PNMs are mainly used in the following four aspects: (1) as an excellent cargo to deliver bone regenerative growth factors/drugs; (2) as a fluorescent material to trace cell differentiation and bone formation; (3) as a raw material to synthesize or modify tissue engineering scaffolds; (4) as a bio-active substance to regulate cell behavior. Recent advances in the interaction between nanomaterials and cells have revealed that autophagy, a cellular survival mechanism that regulates intracellular activity by degrading/recycling intracellular metabolites, providing energy/nutrients, clearing protein aggregates, destroying organelles, and destroying intracellular pathogens, is associated with the phagocytosis and clearance of nanomaterials as well as material-induced cell differentiation and stress. Autophagy regulates bone remodeling balance via directly participating in the differentiation of osteoclasts and osteoblasts. Moreover, autophagy can regulate bone regeneration by modulating immune cell response, thereby modulating the osteogenic microenvironment. Therefore, autophagy may serve as an effective target for nanomaterials to facilitate the bone regeneration process. Increasingly, studies have shown that PNMs can modulate autophagy to regulate bone regeneration in recent years. This paper summarizes the current advances on the main application of PNMs in bone regeneration, the critical role of autophagy in bone regeneration, and the mechanism of PNMs regulating bone regeneration by targeting autophagy.

Small Intestinal Submucosa Membrane Modified by Fusion Peptide-Mediated Extracellular Vesicles to Promote Tissue Regeneration.

Tissue injury, which often occurs in daily life, remains challenging in clinical medicine. Developing a novel biomaterial with the capability to provide an ideal microenvironment and homeostasis around the wound is highly desirable for effective tissue regenerative medicine. The small intestinal submucosa (SIS) membrane possesses a precise spatial structure with excellent biocompatibility. Extracellular vesicles (EVs) derived from umbilical cord mesenchymal stem cells can achieve rapid cell proliferation and migration with little immune response by creating a satisfactory microenvironment. In this study, fusion peptide-mediated EVs are able to modify the surface of the SIS membrane via specific combination. In vitro studies prove that modified SIS membranes can promote cell migration and spreading. This phenomenon may be because of the activation of TEADs, which regulate cell behavior. By constructing a rat abdominal wall defect model, it is further demonstrated that the modified SIS membrane is more conducive to tissue regeneration. Collectively, these results suggest that SIS membranes modified by fusion peptide-mediated EVs achieve excellent biofunction and provide promising prospects for tissue regeneration.

3D Confinement Regulates Cell Life and Death

AbstractBiophysical properties of the cellular microenvironment, including stiffness and geometry, have been shown to influence cell function. Recent findings have implicated 3D confinement as an important regulator of cell behavior. The understanding of how mechanical signals direct cell function is based primarily on 2D studies. To investigate how the extent of 3D confinement affects cell function, a single cell culture platform is fabricated with geometrically defined and fully enclosed microwells and it is applied to investigate how niche volume and stiffness affect human mesenchymal stem cells (hMSC) life and death. The viability and proliferation of hMSCs in confined 3D microniches are compared with unconfined cells in 2D. Confinement biases hMSC viability and proliferation, and this influence depends on the niche volume and stiffness. The rate of cell death increases and proliferation markedly decreases upon 3D confinement. The observed differences in hMSC behavior are correlated to changes in nuclear morphology and YES‐associated protein (YAP) localization. In smaller 3D microniches, hMSCs display smaller and more rounded nuclei and primarily cytoplasmic YAP localization, indicating reduced mechanical activation upon confinement. Interestingly, these effects scale with the extent of 3D confinement. These results demonstrate that the extent of confinement in 3D can be an important regulator of cell function.

Desmosomes as Signaling Hubs in the Regulation of Cell Behavior.

Desmosomes are intercellular junctions, which preserve tissue integrity during homeostatic and stress conditions. These functions rely on their unique structural properties, which enable them to respond to context-dependent signals and transmit them to change cell behavior. Desmosome composition and size vary depending on tissue specific expression and differentiation state. Their constituent proteins are highly regulated by posttranslational modifications that control their function in the desmosome itself and in addition regulate a multitude of desmosome-independent functions. This review will summarize our current knowledge how signaling pathways that control epithelial shape, polarity and function regulate desmosomes and how desmosomal proteins transduce these signals to modulate cell behavior.

Reversible dynamic mechanics of hydrogels for regulation of cellular behavior

The mechanical properties of the native extracellular matrix play a key role in regulating cell behavior during developmental, healing and homeostatic processes. Since these properties change over time, it may be valuable to have the capacity to dynamically vary the mechanical properties of engineered hydrogels used in tissue engineering strategies to better mimic the dynamic mechanical behavior of native extracellular matrix. However, in situ repeatedly reversible dynamic tuning of hydrogel mechanics is still limited. In this study, we have engineered a hydrogel system with reversible dynamic mechanics using a dual-crosslinkable alginate hydrogel. The effect of reversible mechanical signals on encapsulated stem cells in dynamically tunable hydrogels has been demonstrated. In situ stiffening of hydrogels decreases cell spreading and proliferation, and subsequent softening of hydrogels gives way to an increase in cell spreading and proliferation. The hydrogel stiffening and softening, and resulting cellular responses are repeatedly reversible. This hydrogel system provides a promising platform for investigating the effect of repeatedly reversible changes in extracellular matrix mechanics on cell behaviors. Statement of significanceSince the mechanical properties of native extracellular matrix (ECM) change over time during development, healing and homeostatic processes, it may be valuable to have the capacity to dynamically control the mechanics of biomaterials used in tissue engineering and regenerative medicine applications to better mimic this behavior. Unlike previously reported biomaterials whose mechanical properties can be changed by the user only a limited number of times, this system provides the capacity to induce unlimited alterations to the mechanical properties of an engineered ECM for 3D cell culture. This study presents a strategy for on-demand dynamic and reversible control of materials’ mechanics by single and dual-crosslinking mechanisms using oxidized and methacrylated alginates. By demonstrating direct changes in encapsulated human mesenchymal stem cell morphology, proliferation and chondrogenic differentiation in response to multiple different dynamic changes in hydrogel mechanics, we have established a repeatedly reversible 3D cellular mechanosensing system. This system provides a powerful platform tool with a wide range of stiffness tunability to investigate the role of dynamic mechanics on cellular mechanosensing and behavioral responses.

Thrombospondin-4 Is a Soluble Dermal Inflammatory Signal That Selectively Promotes Fibroblast Migration and Keratinocyte Proliferation for Skin Regeneration and Wound Healing

Thrombospondin-4 (THBS4) is a non-structural extracellular matrix molecule associated with tissue regeneration and a variety of pathological processes characterized by increased cell proliferation and migration. However, the mechanisms of how THBS4 regulates cell behavior as well as the pathways contributing to its effects have remained largely unexplored. In the present study we investigated the role of THBS4 in skin regeneration both in vitro and in vivo. We found that THBS4 expression was upregulated in the dermal compartment of healing skin wounds in humans as well as in mice. Application of recombinant THBS4 protein promoted cutaneous wound healing in mice and selectively stimulated migration of primary fibroblasts as well as proliferation of keratinocytes in vitro. By using a combined proteotranscriptomic pathway analysis approach we discovered that β-catenin acted as a hub for THBS4-dependent cell signaling and likely plays a key role in promoting its downstream effects. Our results suggest that THBS4 is an important contributor to wound healing and its incorporation into novel wound healing therapies may be a promising strategy for treatment of cutaneous wounds.

Role of miR-139-5p in ectopic endometrial stromal cells and the underlying molecular mechanism.

Endometriosis is an estrogen-dependent disease. Studies have shown that miR-139-5p is significantly upregulated in endometriosis lesions, but its specific role and molecule mechanism in endometriosis has not yet been reported. The malignant biological behavior of ectopic endometrial stromal cells (ESCs) is similar to that of malignant cancer cells. BBC3 (BCL2 binding component 3) is a known apoptosis inducer and it serves key roles in the regulation of cell behavior. However, the role of BBC3 in ectopic ESCs remains unknown. The present study aimed to investigate the role of miR-139-5p in the progression of endometriosis and to determine its underlying molecular mechanism of action. Ectopic, non-ectopic and normal endometrial stromal cells (ESCs) were extracted from endometrial samples, and reverse transcription-quantitative PCR was performed to determine microRNA (miR)-139-5p and Bcl-2 binding component 3 (BBC3) mRNA expression levels in endometrial tissue samples and ESCs. The target gene of miR-139-5p was predicted using TargetScan software and verified using a dual luciferase reporter assay. Western blotting was performed to determine BBC3 protein expression levels. Flow cytometry analysis, and MTT and Transwell assays were performed to assess cell apoptosis, viability, and migration and invasion of the cells transfected with inhibitor control, miR-139-5p inhibitor, miR-139-5p inhibitor + control-small interfering (si)RNA or miR-139-5p inhibitor + BBC3-siRNA, respectively. The results demonstrated that miR-139-5p expression levels were upregulated in ectopic endometrial samples and ESCs compared with the respective control groups. Furthermore, it was verified that BBC3 was a direct target of miR-139-5p, and both BBC3 mRNA and protein expression levels were downregulated in ectopic endometrial samples and ESCs. Both transfection with the miR-139-5p inhibitor and BBC3-small interfering (si)RNA markedly downregulated miR-139-5p and BBC3 expression levels in ectopic ESCs, respectively. miR-139-5p inhibitor-induced upregulated BBC3 expression was reversed following transfection with BBC3-siRNA. Furthermore, the miR-139-5p inhibitor significantly decreased viability, migration and invasion, while inducing apoptosis in ectopic ESCs compared with the inhibitor control group. Notably, the aforementioned effects were reversed by knocking down BBC3 expression. In conclusion, the results of the present study suggested that miR-139-5p may play a key role in the progression of endometriosis by regulating the viability of ESCs and directly targeting BBC3.

Interplay Between Notch and YAP/TAZ Pathways in the Regulation of Cell Fate During Embryo Development.

Cells in growing tissues receive both biochemical and physical cues from their microenvironment. Growing evidence has shown that mechanical signals are fundamental regulators of cell behavior. However, how physical properties of the microenvironment are transduced into critical cell behaviors, such as proliferation, progenitor maintenance, or differentiation during development, is still poorly understood. The transcriptional co-activators YAP/TAZ shuttle between the cytoplasm and the nucleus in response to multiple inputs and have emerged as important regulators of tissue growth and regeneration. YAP/TAZ sense and transduce physical cues, such as those from the extracellular matrix or the actomyosin cytoskeleton, to regulate gene expression, thus allowing them to function as gatekeepers of progenitor behavior in several developmental contexts. The Notch pathway is a key signaling pathway that controls binary cell fate decisions through cell–cell communication in a context-dependent manner. Recent reports now suggest that the crosstalk between these two pathways is critical for maintaining the balance between progenitor maintenance and cell differentiation in different tissues. How this crosstalk integrates with morphogenesis and changes in tissue architecture during development is still an open question. Here, we discuss how progenitor cell proliferation, specification, and differentiation are coordinated with morphogenesis to construct a functional organ. We will pay special attention to the interplay between YAP/TAZ and Notch signaling pathways in determining cell fate decisions and discuss whether this represents a general mechanism of regulating cell fate during development. We will focus on research carried out in vertebrate embryos that demonstrate the important roles of mechanical cues in stem cell biology and discuss future challenges.

Nanotechnologies and Nanomaterials in 3D (Bio)printing toward Bone Regeneration

The utilization of biomedical nanotechnologies and nanomaterials has surged in the field of 3D bone printing and bioprinting. As such, it is possible to reproduce the hierarchical structures and compositions of the native bone‐related tissues, allowing for regulating cell behaviors and tissue formation toward bone tissue engineering. The use of nanobiomedical systems may also enhance the shape fidelity and printability apart from endowing plentiful biological functions to the (bio)inks. Herein, first, the recently published literature on nanotechnologies and nanomaterials utilized for 3D bone (bio)printing is overviewed. Later, recent progress and challenges for osseous interface and vascularized bone reconstructions are discussed. Finally, the future prospectives and potential commercialization for 3D‐(bio)printed personalized bone implants are proposed.

Micro-and-nanometer topological gradient of block copolymer fibrous scaffolds towards region-specific cell regulation

Regulating cell behavior and function by surface topography has drawn significant attention in tissue engineering. Herein, a gradient fibrous scaffold comprising anisotropic aligned fibers and isotropic annealed fibers was developed to provide a controllable direction of cell migration, adhesion, and spreading. The electrospun aligned fibers were engraved to create surface gradients with micro-and-nanometer roughness through block copolymer (BCP) self-assembly induced by selective solvent vapor annealing (SVA). The distinct manipulation of cell behavior by annealed fibrous scaffolds with tailored self-assembled nanostructure and welded fibrous microstructure has been illustrated by in situ/ex situ small angle X-ray scattering (SAXS), scanning electron microscopy (SEM), atomic force microscopy (AFM) and in vitro cell culture. Further insights into the effect of integrated gradient fibrous scaffold were gained at the level of protein expression. From the perspective of gradient topology, this region-specific scaffold based on BCP fibers shows the prospect of guiding cell migration, adhesion and spreading and provides a generic method for designing biomaterials for tissue-engineering.

Engineered Extracellular Matrices with Integrated Wireless Microactuators to Study Mechanobiology.

Mechanobiology explores how forces regulate cell behaviors and what molecular machinery are responsible for the sensing, transduction, and modulation of mechanical cues. To this end, probing of cells cultured on planar substrates has served as a primary experimental setting for many decades. However, native extracellular matrices (ECMs) consist of fibrous protein assemblies where the physical properties spanning from the individual fiber to the network architecture can influence the transmission of forces to and from the cells. Here, a robotic manipulation platform that allows wireless, localized, and programmable deformation of an engineered fibrous ECM is introduced. A finite-element-based digital twin of the fiber network calibrated against measured local and global parameters enables the calculation of deformations and stresses generated by different magnetic actuation schemes across a range of network properties. Physiologically relevant mechanical forces are applied to cells cultured on the fiber network, statically or dynamically, revealing insights into the effects of matrix-borne forces and deformations as well as force-mediated matrix remodeling on cell migration and intracellular signaling. These capabilities are not matched by any existing approach, and this versatile platform has the potential to uncover fundamental mechanisms of mechanobiology in settings with greater relevance to living tissues.

Nanoscale Surface Topography Reduces Focal Adhesions and Cell Stiffness by Enhancing Integrin Endocytosis.

Both substrate stiffness and surface topography regulate cell behavior through mechanotransduction signaling pathways. Such intertwined effects suggest that engineered surface topographies might substitute or cancel the effects of substrate stiffness in biomedical applications. However, the mechanisms by which cells recognize topographical features are not fully understood. Here we demonstrate that the presence of nanotopography drastically alters cell behavior such that neurons and stem cells cultured on rigid glass substrates behave as if they were on soft hydrogels. With atomic force microscopy, we show that rigid nanotopography resembles the effects of soft hydrogels in reducing cell stiffness and membrane tension. Further, we reveal that nanotopography reduces focal adhesions and cell stiffness by enhancing the endocytosis and the subsequent removal of integrin receptors. This mechanistic understanding will support the rational design of nanotopography that directs cells on rigid materials to behave as if they were on soft ones.