Regional Fault Research Articles

Geophysical insights into basement faults influencing basin evolution: A case study from Tennant Creek Block, North Australian Craton

Geophysical interpretation and modelling of the poorly exposed Proterozoic basement rocks of the Tennant Creek Block in the North Australian Craton elucidated the distribution, location, connectivity, and overprinting relationships of regional faults. The prominent structural grain within the basement comprises west-northwest-striking faults that commonly bound geophysically defined domains of the Warramunga Formation and felsic plutons of the Tennant Creek Supersuite. Constrained by seismic reflection data, forward models of gravity and magnetic data identified several faults as major structures that link into a shallow south-dipping structure at approximately 20 km depth. The modelling also reveals a 20 km wide and 14 km southward deepening half-graben bounded by a northeast dipping normal fault. The half-graben forms a sub-basin filled with the Ooradidgee Group at the top of the basement stratigraphy. The west-northwest-trending structural grain of the basement is not reflected in the Tomkinson Creek Group in the overlying younger basin. The younger basin has dominant north-oriented faults and basement highs. This suggests basement structures had limited influence in controlling the evolution of younger basins in this region. Our approach has wider relevance, addressing similar challenges encountered in other cratonic areas globally, such as India and Africa, where sedimentary cover obscures critical aspects of basement architecture and tectonic evolution. This underscores the broader significance of our methodology in advancing the understanding of Precambrian terranes.

Formation of a late-orogenic conglomeratic sequence in the Neoarchean western Wabigoon terrane, Superior craton

The Neoarchean conglomeratic Timiskaming assemblage is considered to be one of the most gold-endowed rock associations in the Abitibi greenstone belt of the southern Superior craton. Identifying Timiskaming-like basins, therefore, may facilitate new discoveries of gold deposits in other Archean greenstone belts. This study focuses on the conglomeratic Ament Bay assemblage (ABA) in the Neoarchean Sturgeon Lake greenstone belt of the western Wabigoon terrane of the western Superior craton. Geologic mapping and petrographic analysis show that the ABA consists of a ≥1000 m thick conglomerate-arenite lithofacies and a conformably overlying ≥200 m thick greywacke-mudstone lithofacies, which are interpreted to indicate a sub-aerial fan delta that transitioned into subaqueous turbidites. The depositional age is constrained to be between 2697.5 ± 1.2 and 2693.2 ± 0.9 Ma by the statistically defined minimum age of the ABA detrital zircons and igneous zircons of an alkalic intrusion within the ABA, respectively. Detrital zircons from seven ABA samples are characterized by ca. 2930, 2780–2770, and 2750–2690 Ma age populations along with minor zircons of ca. 3300–3000 Ma, which are consistent with proximal sources mostly in the western Wabigoon terrane and secondarily in the adjacent Winnipeg River terrane. Petrography of conglomerate clasts and sandstone supports these provenances and reveals additional sources from proximal mafic volcanic rocks. The ABA is interpreted to result from uplift and erosion associated with the late-stage convergence between the western Wabigoon and Winnipeg River terranes and to be partially controlled by a regional fault zone and accompanied by broadly coeval alkalic magmatism. Overall, the ABA is similar to the typical Timiskaming assemblage in lithofacies, depositional environments, structural setting, and syn-depositional alkalic magmatism, but dissimilar to the latter in gold endowment. The apparent lack of gold in the ABA is likely due to assimilation of crustal components into the coeval alkalic melts and a shallow-penetrating fault zone, in contrast to the juvenile nature of alkalic magmatism and deep-penetrating fault zones associated with the Timiskaming assemblage. This study suggests that Timiskaming-like basins similar in geology are not necessarily equivalent to the typical Timiskaming assemblage in gold endowment.

Monitoring Velocity Change Over 20 Years at Parkfield

AbstractWe monitored the time history of the velocity change (dv/v) from 2002 to 2022 to investigate temporal changes in the physical state near the Parkfield Region of the San Andreas Fault throughout the interseismic period. Following the coseismic decrease in dv/v caused by the 2003 San Simeon (SS) and the 2004 Parkfield earthquakes, the dv/v heals logarithmically and shows a net long‐term increase in which the current dv/v level is equivalent to, or exceeding, the value before the 2003 SS earthquake. We investigated this long‐term trend by fitting the model accounting for the environmental and coseismic effects to the channel‐weighted dv/v time series. We confirmed with the metrics of Akaike information criterion and Bayesian information criterion that the additional term of either a linear trend term, or a residual healing term for the case where the healing had not been completed before the SS earthquake occurred, robustly improved the fit to the data. We eventually evaluated the sensitivity of the dv/v time history to the GNSS‐derived strain field around the fault. The cumulative dilatational strain spatially averaged around the seismic stations shows a slight extension, which is opposite to what would be expected for an increase in dv/v. However, the cumulative rotated axial strain shows compression in a range near the maximum contractional horizontal strain (azimuth of N35°W to N45°E), suggesting that the closing of pre‐existing microcracks aligned perpendicular to the axial contractional strains would be a candidate to cause the long‐term increase observed in the multiple station pairs.

Timing and Source of Recharge to the Columbia River Basalt Groundwater System in Northeastern Oregon.

Recharge to and flow within the Columbia River Basalt Group (CRBG) groundwater flow system of northeastern Oregon were characterized using isotopic, gas, and age-tracer samples from wells completed in basalt, springs, and stream base flow. Most groundwater samples were late-Pleistocene to early-Holocene; median age of well samples was 11,100 years. The relation between mean groundwater age and completed well depth across the eastern portion of the study area was similar despite differences in precipitation, topographic position, incision, thickness of the sedimentary overburden, and CRBG geologic unit. However, the lateral continuity in groundwater age was disrupted across large regional fault zones indicating these structures are substantial impediments to groundwater flow from the high-precipitation uplands to adjacent lower-precipitation and lower-elevation portions of the study area. Recharge rates calculated from the age-depth relations were <3 mm/yr and independent of the modern precipitation gradient across the study area. The age-constrained recharge rates to the CRBG groundwater system are considerably smaller than previously published estimates and highlight the uncertainty of prevailing models used to estimate recharge to the CRBG groundwater system across the Columbia Plateau in Oregon and Washington. Age tracer and isotopic evidence indicate recharge to the CRBG groundwater system is an exceedingly slow and localized process.

Volcano tectonic setting of the Salares Norte Au–Ag epithermal belt, central Andes of northern Chile

The Salares Norte (SN) Au–Ag belt is here defined as an Upper Miocene-Pliocene metallogenic area, extending for nearly 200 km, located NE of the northern end of the Upper Oligocene-Lower Miocene Maricunga Belt in the central Andes of northern Chile. The belt is located just east of the main reverse NS fault systems which are part of the Sierra Castillo, Potrerillos Mine and Claudio Gay Cordillera faults, limited to the north and south by the NW-striking oblique to the arc Imilac and Wheelwright-Incahuasi regional faults systems.The epithermal deposits within the SN belt are intimately associated with the occurrence of Middle Miocene volcaniclastic basins and Middle to Upper Miocene phreatomagmatic vents and their related high-sulfidation hydrothermal systems. The volcanostratigraphy of the SN epithermal belt comprises volcaniclastic sequences, subvolcanic and volcanic rocks ranging between the Lower Miocene and the Pliocene. High-angle NS reverse faults involving Paleozoic and lower Cenozoic units form the western-southwestern limit of the belt. Folded and faulted Middle Miocene volcaniclastic and volcanic sequences form the main host rock of at least 4 phreatomagmatic events that generated maar-diatreme fields and discrete maar vents, with their related subvolcanic facies, within the widespread Upper Cenozoic volcanic arc, ranging in age between ca. 15 and ca. 4 Ma. These four phreatomagmatic events are spatially and temporarily associated to 4 main high-sulfidation hydrothermal events which have altered both the phreatomagmatic rocks and the Cenozoic country rock of the explosive activity. These hydrothermal systems have formed dozens of discrete hydrothermally altered areas where argillic, advance argillic, silicification and steam-heated alteration are common. Most of the maar fields and the hydrothermal alteration systems are emplaced within a strike-slip tectonic regime with NE-trending shortening which is accommodated in the NW-striking sinistral-normal faults and NE-striking extension structures. These fault systems crosscutting interaction favor the hydrothermal fluid circulation and migration, as well as mineral precipitation on structural and/or primary lithological traps and on NE-striking tension cracks.In summary, the SN epithermal belt is an almost 200 km long and 60 km wide area, mainly NNE-oriented, where epithermal deposits have formed during the Upper Miocene and Pliocene (ca. 13-4 Ma), emplaced within Middle to Upper Miocene volcanic and volcaniclastic sequences associated to small volcanotectonic basins oriented in NS, NE-SW and NW-SE directions, in which most of the high-sulfidation systems are associated to discrete or repetitive structurally-controlled Upper Miocene-Pliocene phreatomagmatic vents and maar fields.

Geomorphological study of the origin of Mongolian Altai Mountains Lake depressions: implications for the relationships between tectonic and glacial processes

The lake depressions in the Mongolian Altai Mountains, and the issues related to their formation have yet to be thoroughly examined in previous research. Previous studies primarily focused on the paleogeographical evolution and glaciation dynamics of the Altai Mountains. This study presents relationships between tectonic and glacial processes that have formed the lake depressions, such asKhoton, Khurgan, Dayan, Khar (western), and Khar (eastern) in the Mongolian Altai Mountains. The depressions of Khoton, Khurgan, and Dayan lakes are situated along regional fault zones, extending in an northwest-southeast direction, forming intermontane depressions directly connected to the Mongolian Altai Mountains. However, the depressions of Dayan, Khar (western), and Khar (eastern) lakes have been dammed by moraine deposits in the near portion of the depression. The compliance matrix of tectonic geomorphological criteria indicates that the Khoton, Khurgan, Dayan Lake, and Khar (western) Lake depressions are more than 50% compatible. Similarly, the compliance matrix for glacial eomorphological criteria indicates more than 60% compliance for all lake depressions. The Mongolian Altai intermontane depressions are thus of tectonic origin, whereas the lakes have a glacial origin, resulting from dammed moraine sediments. The significanceof this work lies in demonstrating how geomorphological research can be employed to provide a detailed understanding of the pattern of lake depressions.

Active Distribution Network Fault Diagnosis Based on Improved Northern Goshawk Search Algorithm

Timely and accurate fault location in active distribution networks is of vital importance to ensure the reliability of power grid operation. However, existing intelligent algorithms applied in fault location of active distribution networks possess slow convergence speed and low accuracy, hindering the construction of new power systems. In this paper, a new regional fault localization method based on an improved northern goshawk search algorithm is proposed. The population quality of the samples was improved by using the chaotic initialization strategy. Meanwhile, the positive cosine strategy and adaptive Gaussian–Cauchy hybrid variational perturbation strategy were introduced to the northern goshawk search algorithm, which adopted the perturbation operation to interfere with the individuals to increase the diversity of the population, contributing to jumping out of the local optimum to strengthen the ability of local escape. Finally, simulation verification was carried out in a multi-branch distribution network containing distributed power sources. Compared with the traditional regional localization models, the new method proposed possesses faster convergence speed and higher location accuracy under different fault locations and different distortion points.

New insights into lamellar and twinning transformations in TiAl/Nb composites with core-shell structure during high temperature annealing

Lamellar and twinning transformations play a crucial role in stabilizing the ordered phases in TiAl based composites for property improvement. In this work, we have systematically investigated the lamellar and twinning transformations in TiAl/Nb composites with core-shell structure and proposed novel insights on γ → α2 and γ → γT processes from an atomistic perspective. The results show that high temperature annealing facilitates the formation of lamellar microstructure including γ + α2 and γT twin lamellae in the vicinity of core/shell interface, due to rapid diffusion of principal atoms followed by atomic shuffling. Specifically, plenty of lenticular γT can nucleate in B2 regime by accidental misalignment of atoms on a 110B2 plane adhering to Kurdjumov-Sachs relationship, and then grow even into α2 lath driven by the release of internal stress via Shockley partial slips on the 111γ plane. The formation of γT mediated by 9R involves γ → 9R and γ ← 9R → γT transformations. Among them, a full period of atomic stacking …ABC|BCA|CAB… (LPSO) can be achieved through three Shockley partials being sequentially activated on the C, A and B atomic layers in the stacking of …ABC|ABC|ABC… (L10) with the total shift of 3δA. Then 9R will change synchronously to γ and γT once the migrating Shockley partials react with Frank partials to yield a full dislocation, i.e., δA + Dδ→DA and δA + δC + δD→BD, which can also be considered as detwinning and twinning behaviors, respectively. Additionally, the transition of bulk γ to α2 or γT lamellae is closely associated with the stacking faults, i.e. whether the activated atomic layer is located at the boundary or periphery of the updated stacking fault region.

Study on Water Inrush Characteristics of Hard Rock Tunnel Crossing Heterogeneous Faults

Fault water inflow is one of the most severe disasters that can occur during the construction of hard and brittle rock tunnels. These tunnels traverse brittle fault breccia zones comprising two key components: a damage zone dominated by low-strain fractures and an internally nested high-strain zone known as the fault core. Structural heterogeneity influences the mechanical and hydraulic properties within fault breccia zones, thereby affecting the evolving characteristics of water inflow in hard rock faulting. Based on the hydraulic characteristics within hard rock fault zones, this paper presents a generalized dual-porosity fluid-solid coupling water inflow model. The model is utilized to investigate the spatiotemporal evolution patterns of water pressure, inflow velocity, and water volume during tunneling through heterogeneous fault zones in hard rock. Research findings indicate that when tunnels pass through the damage zones, water inrush velocity is high, yet the water volume is low, and both decrease rapidly over time. Conversely, within the core regions of faults, water inflow velocity is low, yet the water volume is high, and both remain relatively stable over time. Simulation results closely align with the water inflow data from China’s largest cross-section tunnel, the Tiantai Mountain Tunnel, thus validating the accuracy of the evolutionary model proposed in this paper. These findings offer a new perspective for devising effective prevention strategies for water inflow from heterogeneous faults.

Mineralogy and 40Ar-39Ar dating of the recently discovered tainiolite occurrences in the Kaerqiaer fluorite Belt, western Altyn Tagh Terrane

The Kaerqiaer Fluorite Belt (KFB) contains the Kaerqiaer, Xiaobaihegou, Kumutashi, Northern Layidan, and Gaijike fluorite deposits in the western Altyn Tagh Terrane of NW China. An occurrence of Li-bearing mica tainiolite (KLiMg2(Si4O10) F2) has been recently discovered, associated with fluorite-bearing alkali feldspar granite. The tainiolite is hosted by fluorite-calcite veins that contain assemblages of tainiolite-fluorite-calcite and apatite-bastnaesite-tainiolite-fluorite-calcite along the contact zone with alkali feldspar granite. The tainiolite occurs as euhedral crystals and has high concentrations in the veins. 40Ar-39Ar dating of the tainiolite from Xiaobaihegou yields an age of 421 ± 2 Ma, and single-crystal X-ray diffraction confirms the tainiolite has a monoclinic 1 M−type with a C2/m (#12) space group. Minor structural variations in the mica are attributed to the substitution of Li for Mg. EPMA and LA-ICP-MS analyses show that the tainiolite has high Li, Rb, Cs, Sn and Nb concentrations, and low Ta, total REE concentrations. The average Li2O content of the fluorite-tainiolite veins reaches 0.36 %, surpassing the economic cut-off grade. We suggest that the fluorite deposits formed from highly fractionated Li-F-P-rich residual melt evolved from the parental magmas of alkali feldspar granite. The tainiolite mineralisation may result from subsequent hydrothermal activities caused by the reactivation of regional faults under the extensional regime between the Middle Altyn and Eastern Kunlun terranes. The discovery of tainiolite occurrences made KFB a potential area for not only F but also Li resources.

Geochemistry of high temperature initial geothermal fluids in the Dabie orogenic belt

Analyzing the genesis and resource potential of orogenic geothermal systems poses significant challenges due to their complex geological backgrounds and evolutionary histories. This paper presents a novel synthesis of hydrogeochemical and isotope geochemical data, coupled with geological and geophysical results, to comprehensively understand the origins of deep, high-temperature orogenic geothermal systems. This understanding is achieved through the utilization of advanced geochemical modeling techniques to analyze the geochemical attributes of initial geothermal fluids. The hydrochemical and H/O/S isotopic composition of a total of 67 geothermal and non-geothermal water samples from the Dabie orogenic belt (DOB) were analyzed. Integrated multicomponent geothermometry (IMG) was employed to reconstruct the characteristics of the initial geothermal fluids, and PHREEQC inverse simulations creatively determined the most likely pathways of their genesis and evolution. The findings indicate that all geothermal waters from the three major geothermal fields of Luotian, Yingshan, and Yuexi are alkali-sulfate type waters. The initial geothermal fluids are acidic sulfate type with reservoir temperatures of 156–222 °C, 115–179 °C, and 100–189 °C, respectively. The primary processes responsible for the formation of these initial geothermal fluids are the dissolution of anhydrite from sulfide oxidation and, to a lesser extent, direct sulfide oxidation. Generally, the formation of geothermal systems in the investigated geothermal fields is associated with the extensional collapse and lithospheric thinning of the Dabie orogen since the Early Cretaceous Period. The spatial distribution of the three geothermal fields in this study corresponds to the tectonic-magmatic framework of magmatic intrusion-induced domes (Luotian and Yuexi) in the DOB. The reactivation of the Tan-Lu Fault during the Cenozoic Era suggests the presence of a deep heat source comprising magmatic and metamorphic components. This heat source, combined with the infiltration of paleo-atmospheric and modern atmospheric precipitation water along regional fault systems, results in the formation and gradual dilution of initial geothermal fluids. Neutralization occurs through interactions with calcite and fine-grained sodium aluminosilicates, ultimately leading to the formation of the collected geothermal water. The conceptual model established in this study elucidates the distinctive genesis and formation mechanism of the orogenic geothermal system exemplified by the DOB.

Stress field in northeastern Japan and its relationship with faults of recent earthquakes

Inversion tectonics, in which old normal faults act as reverse faults in current stress fields, are frequently observed in northeastern Japan (Tohoku District); however, the conditions that control these fault activities remain unclear. To improve the identification of faults that are more favorable to slip under current stress conditions, the regional fault mechanisms in the Tohoku District must be better understood. The stress field in the Tohoku District and the likelihood of fault activities were thus estimated using slip tendency (ST) analysis. The results show that in the eastern margin of the Japan Sea (EMJS), the reverse fault type is dominant in the stress field. The maximum horizontal direction changes clockwise from E–W to NW–SE from the northern to the southern regions and counterclockwise from NW–SE to E–W from the Japan Sea to the inland area. In the Tohoku inland area, the estimated direction of the maximum horizontal axis changed after the 2011 Tohoku-Oki earthquake, from E–W to WNW–ESE. ST values were calculated for seven events in the EMJS area. To avoid the influence of the Tohoku-Oki earthquake, only stress field data prior to the 2011 Tohoku-Oki earthquake were used to determine ST values for four of the events in the Tohoku inland area. The results showed eastward-dipping fault planes with low dip angles (approximately 30°–45°) and large ST values (approximately > 0.7). The large ST values indicate that the stress field fault is favorable to slip and the results were consistent with the actual fault plane in the EMJS area. However, in the Tohoku inland area and the southern part of fault model of the 1993 Hokkaido Nansei-Oki earthquake, fault planes with large ST values were found to be inconsistent with the slipped fault plane, thus indicating that slipping was unfavorable. The regional differences are consistent with the volcano distribution and thus, the fluid supply from volcanic activity may have helped the fault slip under difficult stress conditions.Graphical

Seismogenic depth and seismic coupling estimation in the transition zone between Alps, Dinarides and Pannonian Basin for the new Slovenian seismic hazard model

Abstract. Seismogenic depth and seismic coupling are important inputs into seismic hazard estimates. Although the importance of seismic coupling is often overlooked, it significantly impacts seismic hazard results. We present an estimation of upper and lower seismogenic depth and expected hypocentral depth and seismic coupling in the transition zone between the Alps, Dinarides and Pannonian Basin, characterized by a complex deformation pattern, highly variable crustal thickness, and moderate seismic hazard, supporting the development of the 2021 seismic hazard model of Slovenia. The hazard model was based on three seismic source models: area source model, fault source model and smoothed seismicity (point) source model. We estimated the lower seismogenic depth using seismological and geological data and compared them. The seismological estimate was based on two regional earthquake catalogues prepared for this study. In the area source model, estimates of lower seismogenic depth from seismological data are deeper or equal to the ones derived from geological data, except in one case. In the fault source model, we analysed each fault individually and chose seismological lower depth estimates in 12 among 89 faults as more representative. The seismogenic thickness for each individual fault source was determined for seismic coupling determination. The seismic coupling was assessed by two approaches, i.e. we chose the most trusted value from the literature, and the value determined for each fault individually by using the approach based on the updated regional fault and earthquake data sets. The final estimate of seismic coupling ranges from 0.77 to 0.38. We compared the tectonic moment rate based on long-term slip rate using different values of seismic coupling with the seismic moment rate obtained from the earthquake catalogue. The analysis is done for the whole area, as well as for the individual area zones. The analysis of N–S components of estimated slip for the largest faults in the area of west Slovenia shows that the regional geological and geodetic shortening rates are comparable. The total activity rate of three global seismic source models is compared, which gives up to a 10 % difference. Our results contribute to a better understanding of the seismic activity in the region. The presented approach for seismic coupling estimation can be applied in cases where the total slip rate is given instead of its seismic part and can be used at regional or national level. The approach is also suitable for the cross-border harmonization of the European seismic hazard modelling data.

Spatial Heterogeneity of b Values in Northeastern Tibetan Plateau and Its Interpretation.

The northeastern margin of the Tibetan Plateau (NE Tibetan Plateau) exhibits active geological structures and has experienced multiple strong earthquakes, with M ≥ 7, throughout history. Particularly noteworthy is the 1920 M81/2 earthquake in the Haiyuan region that occurred a century ago and is documented as one of the deadliest earthquakes. Consequently, analyzing seismic risks in the northeastern margin of the Tibetan Plateau holds significant importance. The b value, a crucial parameter for seismic activity, plays a pivotal role in seismic hazard analyses. This study calculates the spatial b values in this region based on earthquake catalogs since 1970. The study area encompasses several major active faults, and due to variations in b values across different fault types, traditional grid-search methods may introduce significant errors in calculating the spatial b value within complex fault systems. To address this, we employed the hierarchical space-time point-process (HIST-PPM) method proposed by Ogata. This method avoids partitioning earthquake samples, optimizes parameters using Akaike's Bayesian Information Criterion (ABIC) with entropy maximization, and theoretically allows for a higher spatial resolution and more accurate b value calculations. The results indicate a high spatial heterogeneity in b values within the study area. The northwestern and southeastern regions exhibit higher b values. Along the Haiyuan fault zone, the central rupture zone of the Haiyuan earthquake has relatively higher b values than other regions of this fault zone, which is possibly related to the sufficient release of stress during the main rupture of the Haiyuan earthquake. The b values vary from high in the west to low in the east along the Zhongwei fault. On the West Qinling fault zone, the epicenter of the recent Minxian-Zhangxian earthquake is associated with a low b value. In general, regions with low b values correspond well to areas with moderate-strong seismic events in the past 50 years. The spatial differences in b values may reflect variances in seismic hazards among fault zones and regions within the same fault zone.

Present‐Day 3D Crustal Deformation of the Northeastern Tibetan Plateau From Space Geodesy

AbstractHigh‐resolution present‐day earth surface deformation maps from satellites provide important data constraints, which help us better understand tectonic processes and analyze seismic hazards. Here, we use Sentinel‐1 Radar images (2014–2020) and accurate positioning measurements (2009–2019) to get a high‐resolution three‐dimensional earth surface velocity map for the northeastern Tibetan Plateau, and we invert the slip rate and coupling ratio of major regional faults. We find ∼4 mm/yr uplift along an arc from the Qilianshan to Lajishan, relative to the neighboring low‐elevation area to the east, which indicates ongoing rapid orogeny. We find transient deformation along the Laohushan and 1920 M8.5 Haiyuan rupture segments of the Haiyuan fault, whereas the western Haiyuan, southern Liupanshan, central Lajishan and central‐western West Qinling faults are essentially locked above 15–20 km, suggesting a potentially high seismic hazard.

Application of the on-site P-wave earthquake early warning method based on site-specific ratios of S-waves to P-waves to the 2016 Kumamoto earthquake sequence, Japan

The on-site P-wave earthquake early warning (EEW) based on the site-specific ratios of S-waves to P-waves has been applied to large-sized offshore earthquakes, and the efficiency of the method has been validated. However, the method requires the P-waves including earthquake ground motions radiated from a large slip area while avoiding the inclusion of S-waves. In this study, we investigated the applicability of the on-site P-wave EEW method for ground motions near an earthquake source fault region, using strong-motion data observed during the 2016 Kumamoto earthquake sequence in Japan. At first, we examined the appropriate time-window length following the arrival of the P-waves. As a result, P-waves with a time-window length of 2.56 s after the arrival at most strong-motion stations were required at least to predict appropriately S-waves for the 2016 Kumamoto earthquake sequence, including the large-sized earthquakes. On the other hand, in the case of the large-sized earthquake as the mainshock (Mj 7.3), the method can predict within a brief time of 0.5 to 2 s in the operational use that strong ground motions exceeding a certain threshold (e.g., acceleration of 150 cm/s2) will come. Moreover, we found that the method was not strongly affected by the non-linearity of soil deposits due to strong ground motions during the 2016 Kumamoto earthquake sequence. The variability of the relationship between P- and S-waves at the seismic bedrock influenced by the source and path effects is larger than the variability of the relationships between P-/S-waves at the seismic bedrock and at the ground surface by the site effects, and therefore, it hides the effect of the non-linearity of soil deposits.Graphical

Shallow structure and late quaternary slip rate of the Osaka Bay fault, western Japan

The Osaka Bay is situated at a seismically active region north of the Median Tectonic Line and east of Awaji Island in western Japan, known as part of the Kinki Triangle and the Niigata–Kobe Tectonic Zone. Dense distribution of active faults and high geodetic strain rates characterize the region, posing a major seismic hazard potential to the coastal and metropolitan areas of the Kansai region. To investigate the shallow structure and recent deformation history of active faults in the Osaka Bay, we acquired 15 high-resolution seismic profiles using a Mini-GI airgun and a Boomer as active sources, together with multi-beam bathymetry data across the Osaka Bay Fault. Our seismic sections image a ~ 0.1 to 3.7 km-wide asymmetric anticline forelimb above the Osaka Bay Fault at shallow depths, coupled with a ~ 2.6 km-wide syncline to the west, and a broad, ~ 11 km-wide syncline in the footwall to the east. The synclinal axial surface at shallow depths measured in this study ranges 75°–89°. We observe the vertical displacement of the Osaka Bay Fault increasing northwards along strike. The sediment thickness on the hanging wall, however, is variable, modified by non-tectonic processes such as by tidal currents, affecting the geometry of growth strata. The most recent deformation by the Osaka Bay Fault reaches to near the seafloor by active folding, with large vertical offsets of 8–14 m over the last ~ 11 ka, and 5–11 m over the last ~ 5 ka. By combining with previously reported borehole age data, the average uplift rate on the Osaka Bay Fault is estimated to be ~ 1.0 to 1.7 m/ka during the Latest Pleistocene to Holocene. The inferred slip of the Osaka Bay Fault during the Holocene is likely to account for > 5% of the regional geodetic strain accumulation within the Kinki Triangle. Further studies to evaluate the Holocene slip rates of regional faults are necessary to assess the seismic hazards and the internal strain budgets within the Kinki Triangle and the Niigata–Kobe Tectonic Zone.Graphical abstract

Unravelling the tectonic phases: The impact of the South Caspian Block on Late Cenozoic deformation in the Central Alborz, Iran

Paleostress reconstruction through polyphase fault-slip data of a multi-deformed region suffered collisional tectonics can lead to detecting the stress phases. Based on earthquakes’ focal mechanisms and morphotectonic features, multiple deformation phases model has been proposed for the Alborz Mountains located in the collision zone between the Arabian (Central Iran) and Eurasian (South Caspian block) plates during the Late Cenozoic. In this study, paleostress analysis has been carried out in an area bounded by two (Kandovan and Taleghan) regional faults in the Central Alborz Mountains using fault-slip data. This analysis resulted in the identification of three main tectonic phases. The first, compressional phase is proposed to cause the inversion of the Alborz Mountains’ major initial normal faults to reverse faults during the convergence of the Arabian and Eurasian plates. The second, transpressional phase is offered as a factor for the reactivation of the hidden Alborz basement faults to form the NE-striking left-lateral strike-slip faults on the sedimentary cover. The third, transtensional phase is suggested to be responsible for the development of the NNE–SSW left-lateral transtensional faults. It is proposed that the second and third paleostress phases are affected mainly by the indentation of the South Caspian Block into the Alborz Mountains during the Late Cenozoic.

3D seismic analysis of Cenozoic slope deposits and fluid-flow phenomena along the Nigerian Transform Margin

Abstract 3D seismic data provide new insights on c. 2 km thick Cenozoic post-transform slope sediments and fluid-flow phenomena along the Nigerian Transform Margin. The study documents large-scale mass-transport deposits (MTDs), deep-water channels, sediment waves, and a range of fluid-flow phenomena such as pockmarks, pipes, seabed mound and gas hydrates. They are observed from Pliocene-aged sediments and distributed above structural highs, regional faults, and active and relict deep-water channels in the eastern part of the area, closest to the Niger Delta cone. The fluid-flow features are interpreted to be indicative of an active petroleum system in the deeper subsurface and from fluid migration along planes of deep-seated faults. MTDs are mapped at multiple levels and the volume of failed sediments increased through time within the western part of the study area. The repeated and increased volume of MTDs in the area is attributed to an increased rate of sedimentation through time and slope gradient during the late Cenozoic. The presence of repeated MTDs and fluid-flow phenomena on the Nigerian Transform Margin has implications for installations of offshore facilities as they constitute potential geohazards. The study also documents, for the first time, polygonal fault systems offshore Nigeria.

A numerical investigation of the behavior of a tunnel with adaptive anti-dislocation measures subjected to the action of fault dislocation

In the context of long-distance cross-basin water transfer projects, the water conveyance tunnel serves as a pivotal component in mitigating regional disparities between economic development and water resources allocation. However, in high seismic-intensity areas of southwest China, geological complexities and densely distributed active faults present formidable challenges. Consequently, the construction of water conveyance tunnels necessitates traversing one or more active fault zones. This study examines the impact of an adaptive tunnel structure in the presence of fault dislocation, focusing on the Xianglushan Tunnel, a constituent of the Central Yunnan Water Diversion Project. Taking the Longpan-Qiaohou Fault F10-1 as a case study, we assess the influence of active faults on the anti-dislocation adaptive structure of the Xianglushan Tunnel, considering factors such as displacement, relative deformation, maximum principal stresses, and longitudinal equivalent internal force in critical tunnel sections. Numerical calculations validate the efficacy of this adaptive structure in reducing induced internal forces and deformations of the tunnel lining. The results show that, under the influence of strike-slip dominated fault movement, one side of the tunnel exhibits tensile stress, with a magnitude of approximately 5 MPa. The maximum normal and tangential deformation of the hinge joint is concentrated in the central section of the fault zone. The incorporation of an articulated adaptive design significantly enhances the stress state of lining under dislocation condition. These research results directly inform the engineering design and construction of water conveyance tunnels traversing active fault regions, providing valuable guidance for related tunnel construction endeavors.