Field Of Regenerative Medicine Research Articles

Anti-aging based on stem cell therapy: A scoping review

Stem cells are present in the tissues and organs and remain in a quiescent and undifferentiated state until it is physiologically necessary to produce new descendant cells. Due to their multipotency property, mesenchymal stem cells have attracted considerable attention worldwide due to their immunomodulation and therapeutic function in tissue regeneration. Stem cells secrete components such as paracrine factors, extracellular vesicles, and exosomes which have been shown to have anti-inflammatory, anti-aging, reconstruction and wound healing potentials in many in vitro and in vivo models. The pluripotency and immunomodulatory features of stem cells could potentially be an effective tool in cell therapy and tissue repair. Aging affects the capacity for self-renewal and differentiation of stem cells, decreasing the potential for regeneration and the loss of optimal functions in organisms over time. Current progress in the field of cellular therapy and regenerative medicine has facilitated the evolution of particular guidelines and quality control approaches, which eventually lead to clinical trials. Cell therapy could potentially be one of the most promising therapies to control aging due to the fact that single stem cell transplantation can regenerate or substitute the injured tissue. To understand the involvement of stem cells not only in tissue maintenance and disease but also in the control of aging it is important to know and identify their properties, functions, and regulation in vivo , which are addressed in this review.

Enhancing wound healing with zinc and silver nanocomposites synthesized with β-lactoglobulin: antimicrobial properties, collagen deposition, and systemic effects in a C57BL/6J mouse model

This study explores the potential of zinc and silver nanocomposites, synthesized with β-lactoglobulin, a whey protein, in promoting wound healing, using the C57BL/6J mouse model. Our research is distinct in its dual focus: assessing the antimicrobial efficacy of these nanocomposites and their impact on wound healing processes. The antimicrobial properties were investigated through minimum inhibitory concentration (MIC) assessments and colony-forming unit (CFU) tests, providing insights into their effectiveness against wound-associated microorganisms. Notably, the formulation's effective antibacterial concentration did not exhibit toxicity to mouse fibroblasts. A key aspect of our methodology involved the use of a stereoscopic microscope for detailed monitoring of the wound closure process. Additionally, the distribution and potential systemic effects of the zinc and silver ions were analyzed using Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). This analysis was crucial in evaluating metal ion absorption through the wound site and estimating any toxic effects on the body. Our findings are particularly significant in the field of regenerative medicine. Transmission electron microscopy (TEM) revealed that the tested nanocomposites notably enhanced collagen deposition, a vital component in the wound healing process. Furthermore, a reduction in glycogen levels in hepatocytes was observed following treatment with these metal-protein dressings. This novel finding warrants further investigation. Overall, our findings highlight the diverse roles of zinc and silver nanocomposites in wound healing. This study not only contributes to our understanding of metal-protein complexes in tissue regeneration but also opens new avenues for research into the delivery mechanisms of such treatments for hard-to-heal wounds.

Leveraging the Physicochemical Attributes of Biomimetic Hydrogel Nanocomposites in Stem Cell Differentiation.

The field of tissue engineering has witnessed significant advancements with the advent of hydrogel nanocomposites (HNC), emerging as a highly promising platform for regenerative medicine. HNCs provide a versatile platform that significantly enhances the differentiation of stem cells into specific cell lineages, making them highly suitable for tissue engineering applications. By incorporating nanoparticles, the mechanical properties of hydrogels, such as elasticity, porosity, and stiffness, are improved, addressing common challenges such as short-term stability, cytotoxicity, and scalability. These nanocomposites also exhibit enhanced biocompatibility and bioavailability, which are crucial to their effectiveness in clinical applications. Furthermore, HNCs are responsive to various triggers, allowing for precise control over their chemical properties, which is beneficial in creating 3D microenvironments, promoting wound healing, and enabling controlled drug delivery systems. This review provides a comprehensive overview of the production methods of HNCs and the factors influencing their physicochemical and biological properties, particularly in relation to stem cell differentiation and tissue repair. Additionally, it discusses the challenges in developing HNCs and highlights their potential to transform the field of regenerative medicine through improved mechanotransduction and controlled release systems.

Analysis of cell signaling profiles induced by DNA aptamer-based FGFR1 agonist.

DNA aptamers have attracted attention as an alternative modality for biomolecules due to their excellent target binding specificity and thermal stability, and they are also expected to be applied as artificial agonists for receptor proteins. DNA aptamer agonist TD0 targeting the receptor of fibroblast growth factor (FGFR), which plays an important role in the fields of wound healing and regenerative medicine, has been reported to induce cellular responses as well as its native ligands. However, it was also noted that there were some different responses upon long-term stimulation, suggesting that the intracellular signals induced by DNA aptamer agonist TD0 are different from those of natural ligands. In this paper, we comprehensively analyzed the intracellular signals induced by DNA aptamer agonist TD0 targeting FGFR1, and compared them with those by natural protein ligand FGF2. It was found that the intracellular signals were highly similar for short-term stimulation. On the other hand, the receptor and the downstream cellular signals showed different activation behaviors for long-time stimulation. Evaluating the stability and sustained activity of DNA aptamer agonist TD0 and FGF2 in the medium suggested that ligand stability may be important in properly regulating cellular responses.

Neuroprotective effects of intranasal extracellular vesicles from human platelet concentrates supernatants in traumatic brain injury and Parkinson’s disease models

BackgroundThe burgeoning field of regenerative medicine has significantly advanced with recent findings on biotherapies using human platelet lysates (HPLs), derived from clinical-grade platelet concentrates (PCs), for treating brain disorders. These developments have opened new translational research avenues to explore the neuroprotective effects of platelet-extracellular vesicles (PEVs). Their potential in managing neurodegenerative conditions like traumatic brain injury (TBI) and Parkinson’s disease (PD) warrants further exploration. We aimed here to characterize the composition of a PEV preparation isolated from platelet concentrate (PC) supernatant, and determine its neuroprotective potential and neurorestorative effects in cellular and animal models of TBI and PD.MethodsWe isolated PEVs from the supernatant of clinical-grade PC collected from healthy blood donors utilizing high-speed centrifugation. PEVs were characterized by biophysical, biochemical, microscopic, and LC–MS/MS proteomics methods to unveil biological functions. Their functionality was assessed in vitro using SH-SY5Y neuronal cells, LUHMES dopaminergic neurons, and BV-2 microglial cells, and in vivo by intranasal administration in a controlled cortical impact (CCI)-TBI model using 8-weeks-old male C57/BL6 mice, and in a PD model induced by MPTP in 5-month-old male C57/BL6 mice.ResultsPEVs varied in size from 50 to 350 nm, predominantly around 200 nm, with concentrations ranging between 1010 and 1011/mL. They expressed specific platelet membrane markers, exhibited a lipid bilayer by cryo-electron microscopy and, importantly, showed low expression of pro-coagulant phosphatidylserine. LC–MS/MS indicated a rich composition of trophic factors, including neurotrophins, anti-inflammatory agents, neurotransmitters, and antioxidants, unveiling their multifaceted biological functions. PEVs aided in the restoration of neuronal functions in SH-SY5Y cells and demonstrated remarkable neuroprotective capabilities against erastin-induced ferroptosis in dopaminergic neurons. In microglial cells, they promoted anti-inflammatory responses, particularly under inflammatory conditions. In vivo, intranasally delivered PEVs showed strong anti-inflammatory effects in a TBI mouse model and conserved tyrosine hydroxylase expression of dopaminergic neurons of the substantia nigra in a PD model, leading to improved motor function.ConclusionsThe potential of PEV-based therapies in neuroprotection opens new therapeutic avenues for neurodegenerative disorders. The study advocates for clinical trials to establish the efficacy of PEV-based biotherapies in neuroregenerative medicine.Graphical

Study on the Bioactivity Response of the Newly Developed Zn-Cu-Mn/Mg Alloys for Biodegradable Implant Application.

Scaffolds play a crucial role in bone tissue engineering to support the defect area through bone regeneration and defect reconstruction. Promising tissue regeneration without negative repercussions and avoidance of the lifelong presence inside the body make bioresorbable metals prosper in the field of regenerative medicine. Recently, Zn and its alloys have emerged as promising biodegradable materials for their moderate degradation rate and satisfactory biocompatibility. Nevertheless, it is very challenging for cells to adhere and grow over the Zn surface alone, which influences the tissue-implant integration. In this study, an attempt has been made to systematically investigate the bioactivity responses in terms of in vitro hemocompatibility, cytotoxicity, antibacterial activity, and in vivo biocompatibility of newly developed Zn-2Cu-0.5Mn/Mg alloy scaffolds with different surface roughness. The rough surface of Zn-2Cu-0.5Mg shows the highest degradation rate of 0.16 mm/yr. The rough surface exhibits a prominent role in the adsorption of protein, further enhancing cell adhesion. Concentration-dependent alloy extract shows the highest cell proliferation for 12.5% of the extract with a maximum cell viability of 101% in Zn-2Cu-0.5Mn and 108% in Zn-2Cu-0.5Mg after 3 d. Acceptable hemolysis percentages (less than 5%) with promising anticoagulation properties are observed for all of the conditions. Enhanced antibacterial (Staphylococcus aureus and Escherichia coli) activity due to a significant effect of ions illustrates the maximum killing effect on the bacterial colony for the rough Zn-2Cu-0.5Mg alloy. In addition, it is observed that for rough Zn-2Cu-0.5Mn/Mg alloys, the inflammatory response is minimal after subcutaneous implantation, and neo-bone tissue forms in the defect areas of the rat femur with satisfactory biosafety response. The osseointegration property of the Zn-2Cu-0.5Mg alloy is comparable to that of the Zn-2Cu-0.5Mn alloy. Therefore, the rough surface of the Zn-2Cu-0.5Mg alloy has the potential to enhance biocompatibility and promote better osseointegration activity with host tissues for various biomedical applications.

Innovative Strategies in 3D Bioprinting for Spinal Cord Injury Repair.

Spinal cord injury (SCI) is a catastrophic condition that disrupts neurons within the spinal cord, leading to severe motor and sensory deficits. While current treatments can alleviate pain, they do not promote neural regeneration or functional recovery. Three-dimensional (3D) bioprinting offers promising solutions for SCI repair by enabling the creation of complex neural tissue constructs. This review provides a comprehensive overview of 3D bioprinting techniques, bioinks, and stem cell applications in SCI repair. Additionally, it highlights recent advancements in 3D bioprinted scaffolds, including the integration of conductive materials, the incorporation of bioactive molecules like neurotrophic factors, drugs, and exosomes, and the design of innovative structures such as multi-channel and axial scaffolds. These innovative strategies in 3D bioprinting can offer a comprehensive approach to optimizing the spinal cord microenvironment, advancing SCI repair. This review highlights a comprehensive understanding of the current state of 3D bioprinting in SCI repair, offering insights into future directions in the field of regenerative medicine.

Integrative analysis of long isoform sequencing and functional data identifies distinct cortical layer neuronal subtypes derived from human iPSCs.

Generation of human induced pluripotent stem cells (iPSCs) through reprogramming was a transformational change in the field of regenerative medicine that led to new possibilities for drug discovery and cell replacement therapy. Several protocols have been established to differentiate hiPSCs into neuronal lineages. However, low differentiation efficiency is one of the major drawbacks of these approaches. Here, we compared the efficiency of two methods of neuronal differentiation from iPSCs cultured in two different culture media, StemFlex Medium (SFM) and Essential 8 Medium (E8M). The results indicated that iPSCs cultured in E8M efficiently generated different types of neurons in a shorter time and without the growth of undifferentiated nonneuronal cells in the culture as compared with those generated from iPSCs in SFM. Furthermore, these neurons were validated as functional units immunocytochemically by confirming the expression of mature neuronal markers (i.e., NeuN, β tubulin, and Synapsin I) and whole cell patch-clamp recordings. Long-read single-cell RNA sequencing confirms the presence of upper and deep layer cortical layer excitatory and inhibitory neuronal subtypes in addition to small populations of GABAergic neurons in day 30 neuronal cultures. Pathway analysis indicated that our protocol triggers the signaling transcriptional networks important for the process of neuronal differentiation in vivo.NEW & NOTEWORTHY Low differentiation efficiency is one of the major drawbacks of the existing protocols to differentiate iPSCs into neuronal lineages. Here, we present time-efficient and robust approach of neuronal differentiation leading to the generation of functional brain units, cortical layer neurons. We found iPSCs cultured in Essential 8 media (E8M) resulted in neuronal differentiation without the signs of growth of spontaneously differentiated cells in culture at any point in 35 days compared with Stemflex media (SFM).

Single-cell RNA sequencing identifies inherent abnormalities of adipose-derived stem cells from nonlesional sites of patients with localized scleroderma

BackgroundLocalized scleroderma (LoS) is an autoimmune disorder that primarily affects the skin, and is often treated with autologous fat grafting (AFG). Nevertheless, the retention rate of AFG in patients with LoS is typically low. We hypothesize that the low retention rate may be partially attributed to the inherent abnormalities of adipose-derived stem cells (ASCs) from nonlesional sites of patients with LoS.MethodsWe performed a comparative analysis of the single-cell transcriptome of the SVF from nonlesional sites of patients with LoS and healthy donors, including cellular compositional analysis, differential expression analysis, and high-dimensional weighted gene coexpression network analysis. Experimental validation with fluorescence-activated cell sorting and bleomycin-induced skin fibrosis mice models were conducted.ResultsWe found a significant reduction in the relative proportion of CD55high interstitial progenitors in ASCs under the condition of LoS. Differential expression analysis revealed inherent abnormalities of ASCs from patients with LoS, including enhanced fibrogenesis, reduced anti-inflammatory properties, and increased oxidative stress. Compared with CD55low ASCs, CD55high ASCs expressed significantly higher levels of secreted protein genes that had functions related to anti-inflammation and tissue regeneration (such as CD55, MFAP5, and METRNL). Meanwhile, CD55high ASCs expressed significantly lower levels of secreted protein genes that promote inflammation, such as chemokine and complement protein genes. Furthermore, we provided in vivo experimental evidence that CD55high ASCs had superior treatment efficacy compared with CD55low ASCs in bleomycin-induced skin fibrosis mice models.ConclusionsWe found that the low retention rate of AFG may be partially ascribed to the reduced pool of interstitial progenitor cells (CD55high) present within the ASC population in patients with LoS. We demonstrated the potential for improving the efficacy of AFG in the treatment of LoS by restoring the pool of interstitial progenitors within ASCs. Our study has significant implications for the field of translational regenerative medicine.

Low Immunogenicity of Keratinocytes Derived from Human Embryonic Stem Cells.

Epidermal transplantation is a common and widely used surgical technique in clinical medicine. Derivatives of embryonic stem cells have the potential to serve as a source of transplantable cells. However, allograft rejection is one of the main challenges. To investigate the immunogenicity of keratinocytes derived from human embryonic stem cells (ESKCs), we conducted a series of in vivo and in vitro experiments. The results showed that ESKCs have low HLA molecule expression, limited antigen presentation capabilities, and a weak ability to stimulate the proliferation and secretion of inflammatory factors in allogeneic PBMCs in vitro. In humanized immune mouse models, ESKCs elicited weak transplant rejection responses in the host. Overall, we found that ESKCs have low immunogenicity and may have potential applications in the field of regenerative medicine.

Synergistic effect of waste-derived β-tricalcium phosphate microbeads loaded in hydroxyapatite-keratin-polyvinyl alcohol composite matrix in drug release for osteosarcoma treatment

BackgroundSustained drug delivery system (DDS) for clinically relevant osteosarcoma medications is a promising strategy for treatment. β-tricalcium phosphate (β-TCP) microbeads loaded with doxorubicin hydrochloride (DOX) and cis-diamminedichloroplatin (CDDP) anticancer drugs in a matrix of hydroxyapatite-keratin-polyvinyl alcohol composite matrix scaffolds (HAp-K-PVA) was developed as promising DDS. HAp, β-TCP, and K utilized for the development of DDS were resourced from avian eggshells and human hairs, respectively, and duly characterized before application.MethodsThe β-TCP/alginate microbeads were fabricated using droplet extrusion and ionotropic gelation, and integrated into secondary drug carrier HAp-K-PVA composite matrix, via freeze gelation. The physicochemical and thermal characterization of developed microbeads and matrix scaffolds was performed.ResultsWhen DOX and CDDP were co-loaded in DDS, a synergistic impact was observed after 30 days of continuous release, in contrast to the immediate outburst as seen with individual DOX and CDDP releases. Besides, the drug release from the microbeads only, the release with the HAp-K-PVA composite matrix scaffolds was observed slower. The controlled release, antibacterial effectiveness against the test pathogens and cell viability with osteoblast-like osteosarcoma (UTOS) cells indicated the therapeutic potential for the treatment of osteosarcoma in situ. The cell viability was observed for 24 h, which showed nearly 90% after 24 h for HAp-K-PVA composite matrix scaffolds, decreased for all the scaffold groups after 72 h, indicating the enhancement due to combined synergistic effect of the co-loaded drugs.ConclusionThis study established a promising foundation for novel and sustainable biomaterials for osteosarcoma treatment. Further advancement holds the potential to enhance patient clinical outcomes and foster advancements in the field of regenerative medicine.

Understanding and controlling the variables for stromal vascular fraction therapy.

In regenerative medicine, the isolation of mesenchymal stromal cells (MSCs) from the adipose tissue's stromal vascular fraction (SVF) is a critical area of study. Our review meticulously examines the isolation process of MSCs, starting with the extraction of adipose tissue. The choice of liposuction technique, anatomical site, and immediate processing are essential to maintain cell functionality. We delve into the intricacies of enzymatic digestion, emphasizing the fine-tuning of enzyme concentrations to maximize cell yield while preventing harm. The review then outlines the filtration and centrifugation techniques necessary for isolating a purified SVF, alongside cell viability assessments like flow cytometry, which are vital for confirming the efficacy of the isolated MSCs. We discuss the advantages and drawbacks of using autologous vs allogeneic SVF sources, touching upon immunocompatibility and logistical considerations, as well as the variability inherent in donor-derived cells. Anesthesia choices, the selection between hypodermic needles vs liposuction cannulas, and the role of adipose tissue lysers in achieving cellular dissociation are evaluated for their impact on SVF isolation. Centrifugation protocols are also analyzed for their part in ensuring the integrity of the SVF. The necessity for standardized MSC isolation protocols is highlighted, promoting reproducibility and successful clinical application. We encourage ongoing research to deepen the understanding of MSC biology and therapeutic action, aiming to further the field of regenerative medicine. The review concludes with a call for rigorous research, interdisciplinary collaboration, and strict adherence to ethical and regulatory standards to safeguard patient safety and optimize treatment outcomes with MSCs.

Microvascular network based on the hilbert curve for nutrient transport in thick tissue

Abstract To address the uneven nutrient distribution within three-dimensional (3D) tissue models and organoids currently used in medical research, this study introduces a microvascular network based on the Hilbert curve. Our aim was to develop innovative solutions for enhancing nutrient supply in thick tissue models in vitro. By using 3D bioprinting, we engineered microvascular networks of varying Hilbert orders and validated their efficacy in enhancing nutrient uniformity through numerical simulations and experiments. These networks facilitated broader and more uniform nutrient distribution throughout the thick tissue models, particularly the 2° Hilbert microvascular structure, which occupies less space and significantly reduces regions of cellular death. Furthermore, we explored the potential of assembling larger tissue constructs using the 2° Hilbert microvascular network, showcasing its applicability in constructing large-scale biological models. The findings suggest that the 2° Hilbert microvascular structure is particularly effective in ensuring adequate nutrient delivery, thus enhancing the viability and functionality of large-volume tissue models. These innovations hold significant promise for advancing the fields of tissue engineering and regenerative medicine by improving nutrient delivery to in vitro thick tissue block models. This provides a robust foundation for future in vitro research and clinical applications, potentially leading to more effective treatments and interventions in the medical field. The development of these microvascular networks represents a crucial step forward in overcoming the limitations of current 3D tissue models and organoids, paving the way for more sophisticated and reliable biomedical research tools.

Incorporation of calcium phosphate cement into decellularized extracellular matrix enhances its bone regenerative properties

Decellularized extracellular matrix (dECM) hydrogels are engineered constructs that are widely-used in the field of regenerative medicine. However, the development of ECM-based hydrogels for bone tissue engineering requires enhancement in its osteogenic properties. For this purpose, we initially employed bone-derived dECM hydrogel (dECM-Hy) in combination with calcium phosphate cement (CPC) paste to improve the biological and structural properties of the dECM hydrogel. A decellularization protocol for bovine bone was developed to prepare dECM-Hy, and the mechanically-tuned dECM/CPC-Hy was built based on both rheological and mechanical characteristics. The dECM/CPC-Hy displayed a double swelling ratio and compressive strength. An interconnected structure with distinct hydroxyapatite crystals was evident in dECM/CPC-Hy. The expression levels of Alp, Runx2 and Ocn genes were upregulated in dECM/CPC-Hy compared to the dECM-Hy. A 14-day follow-up of the rats receiving subcutaneous implanted dECM-Hy, dECM/CPC-Hy and mesenchymal stem cells (MSCs)-embedded (dECM/CPC/MSCs-Hy) showed no toxicity, inflammatory factor expression or pathological changes. Radiography and computed tomography (CT) of the calvarial defects revealed new bone formation and elevated number of osteoblasts-osteocytes and osteons in dECM/CPC-Hy and dECM/CPC/MSCs-Hy compared to the control groups. These findings indicate that the dECM/CPC-Hy has substantial potential for bone tissue engineering.

The Prospect of Hepatic Decellularized Extracellular Matrix as a Bioink for Liver 3D Bioprinting.

The incidence of liver diseases is high worldwide. Many factors can cause liver fibrosis, which in turn can lead to liver cirrhosis and even liver cancer. Due to the shortage of donor organs, immunosuppression, and other factors, only a few patients are able to undergo liver transplantation. Therefore, how to construct a bioartificial liver that can be transplanted has become a global research hotspot. With the rapid development of three-dimensional (3D) bioprinting in the field of tissue engineering and regenerative medicine, researchers have tried to use various 3D bioprinting technologies to construct bioartificial livers in vitro. In terms of the choice of bioinks, liver decellularized extracellular matrix (dECM) has many advantages over other materials for cell-laden hydrogel in 3D bioprinting. This review mainly summarizes the acquisition of liver dECM and its application in liver 3D bioprinting as a bioink with respect to availability, printability, and biocompatibility in many aspects and puts forward the current challenges and prospects.

Bioengineering Human Upper Respiratory Mucosa: A Systematic Review of the State of the Art of Cell Culture Techniques.

The upper respiratory mucosa plays a crucial role in both the physical integrity and immunological function of the respiratory tract. However, in certain situations such as infections, trauma, or surgery, it might sustain damage. Tissue engineering, a field of regenerative medicine, has found applications in various medical fields including but not limited to plastic surgery, ophthalmology, and urology. However, its application to the respiratory system remains somewhat difficult due to the complex morphology and histology of the upper respiratory tract. To date, a culture protocol for producing a handleable, well-differentiated nasal mucosa has yet to be developed. The objective of this review is to describe the current state of research pertaining to cell culture techniques used for producing autologous healthy human upper respiratory cells and mucosal tissues, as well as describe its clinical applications. A search of the relevant literature was carried out with no time restriction across Embase, Cochrane, PubMed, and Medline Ovid databases. Keywords related to "respiratory mucosa" and "culture techniques of the human airway" were the focus of the search strategy for this review. The risk of bias in retained studies was assessed using the Joanna Briggs Institute's (JBI) critical appraisal tools for qualitative research. A narrative synthesis of our results was then conducted. A total of 33 studies were included in this review, and thirteen of these focused solely on developing a cell culture protocol without further use. The rest of the studies used their own developed protocol for various applications such as cystic fibrosis, pharmacological, and viral research. One study was able to develop a promising model for nasal mucosa that could be employed as a replacement in nasotracheal reconstructive surgery. This systematic review extensively explored the current state of research regarding cell culture techniques for producing tissue-engineered nasal mucosa. Bioengineering the nasal mucosa holds great potential for clinical use. However, further research on mechanical properties is essential, as the comparison of engineered tissues is currently focused on morphology rather than comprehensive mechanical assessments.

An Analysis of the Biocompatibility, Cytotoxicity, and Bone Conductivity of Polycaprolactone: An In Vivo Study.

Tissue engineering represents a promising field in regenerative medicine, with bioresorbable polymers such as polycaprolactone (PCL) playing a crucial role as scaffolds. These scaffolds support the growth and repair of tissues by mimicking the extracellular matrix. This study aimed to assess the in vivo performance of three-dimensional PCL scaffolds by evaluating their effects on bone repair in rat calvaria and the tissue reaction in subcutaneous implant sites, as well as their impact on major organs such as the kidneys, lungs, and liver. Three-dimensional scaffolds made of PCL were implanted in the subcutaneous tissue of rats' backs and calvaria. Histological analyses were conducted to observe the bone repair process in calvaria and the tissue response in subcutaneous implant sites. Additionally, the kidneys, lungs, and livers of the animals were examined for any adverse tissue alterations. The histological analysis of the bone repair in calvaria revealed newly formed bone growing towards the center of the defects. In subcutaneous tissues, a thin fibrous capsule with collagenous fibers enveloping the implant was observed in all animals, indicating a positive tissue response. Importantly, no harmful alterations or signs of inflammation, hyperplasia, metaplasia, dysplasia, or hemorrhage were detected in the kidneys, lungs, and liver. The findings demonstrate that PCL scaffolds produced through additive manufacturing are biocompatible, non-cytotoxic, and bioresorbable, promoting osteoconduction without adverse effects on major organs. Hence, PCL is confirmed as a suitable biomaterial for further studies in tissue engineering and regenerative medicine.

Sclerostin inhibits Protein kinase C inhibitor GÖ6976 induced osteogenic differentiation of dental follicle cells

Human dental follicle cells (DFCs) as multipotent stem cells are currently investigated within the field of regenerative medicine considering their potential for the regeneration of dental tissues, bone defects caused by periodontal or degenerative diseases and the treatment of craniofacial disorders. However, molecular mechanisms of the differentiation into mineralizing cells are still inadequately understood. Previous studies have shown that GÖ6976, an inhibitor of classical isoforms of protein kinase C (PKC), enhanced ostogenic differentiation of DFCs. A possible mechanism for increased osteogenic differentiation could be the regulation of ossification inhibitors. This study therefore investigated whether the osteogenic differentiation inhibitor sclerostin (SOST) is regulated by GÖ6976 and whether the addition of sclerostin attenuates the stimulating effect of the PKC inhibitor. We demonstrated that the expression of the sclerostin gene decreased after PKC inhibition by GÖ6976 and that its gene expression is likely maintained by PKC via the BMP signaling pathway. Furthermore, supplementation of osteogenic differentiation medium with sclerostin impairs GÖ6976-induced differentiation of DFCs. Our data suggest that regulation of sclerostin mediates PKC inhibition-induced mineralization of DFCs.

Investigation of process parameters of electrohydrodynamic jetting for 3D printed PCL fibrous scaffolds with complex geometries

Tissue engineering is a promising technology in the field of regenerative medicine with its potential to create tissues de novo. Though there has been a good progress in this field so far, there still exists the challenge of providing a 3D micro-architecture to the artificial tissue construct, to mimic the native cell or tissue environment. Both 3D printing and 3D bioprinting are looked upon as an excellent solution due to their capabilities of mimicking the native tissue architecture layer-by-layer with high precision and appreciable resolution. Electrohydrodynamic jetting (E-jetting) is one type of 3D printing, in which, a high electric voltage is applied between the extruding nozzle and the substrate in order to print highly controlled fibres. In this study, an E-jetting system was developed in-house for the purpose of 3D printing of fibrous scaffolds. The effect of various E-jetting parameters, namely the supply voltage, solution concentration, nozzle-to-substrate distance, stage (printing) speed and solution dispensing feed rate on the diameter of printed fibres were studied at the first stage. Optimized parameters were then used to print Polycaprolactone (PCL) scaffolds of highly complex geometries, i.e., semi-lunar and spiral geometries, with the aim of demonstrating the flexibility and capability of the system to fabricate complex geometry scaffolds and biomimic the complex 3D micro-architecture of native tissue environment. The spiral geometry is expected to result in better cell migration during cell culture and tissue maturation.

Modulating endothelial cell dynamics in fat grafting: the impact of DLL4 siRNA via adipose stem cell extracellular vesicles.

In the context of improving the efficacy of autologous fat grafts (AFGs) in reconstructive surgery, this study delineates the novel use of adipose-derived mesenchymal stem cells (ADSCs) and their extracellular vesicles (EVs) as vehicles for delivering delta-like ligand 4 (DLL4) siRNA. The aim was to inhibit DLL4, a gene identified through transcriptome analysis as a critical player in the vascular endothelial cells of AFG tissues, thereby negatively affecting endothelial cell functions and graft survival through the Notch signaling pathway. By engineering ADSC EVs to carry DLL4 siRNA (ADSC EVs-siDLL4), the research demonstrated a marked improvement in endothelial cell proliferation, migration, and lumen formation, and enhanced angiogenesis in vivo, leading to a significant increase in the survival rate of AFGs. This approach presents a significant advancement in the field of tissue engineering and regenerative medicine, offering a potential method to overcome the limitations of current fat grafting techniques.NEW & NOTEWORTHY This study introduces a groundbreaking method for enhancing autologous fat graft survival using adipose-derived stem cell extracellular vesicles (ADSC EVs) to deliver DLL4 siRNA. By targeting the delta-like ligand 4 (DLL4) gene, crucial in endothelial cell dynamics, this innovative approach significantly improves endothelial cell functions and angiogenesis, marking a substantial advancement in tissue engineering and regenerative medicine.