Variation Of Refractive Index Research Articles

Low-loss and compact photonic lantern based on a step-index double cladding fiber.

The fulfilment of the adiabatic criterion is indispensable for the realization of a low-loss photonic lantern (PL), concurrently imposing a stringent restriction on the taper transition length of the PL. Here, by relaxing the adiabatic criterion, a low-loss and compact PL based on a step-index double cladding fiber (SI-DCF) is theoretically proposed and experimentally demonstrated. The use of SI-DCF can reduce the mode field diameter (MFD) expansion ratio during the tapering processing and greatly decrease the taper transition length required for adiabatic tapering. We initially evaluate the variation of both MFD and effective refractive index (RI) along the fiber tapering based on three types of fiber structures, including the modified standard single-mode fiber (SSMF), the graded-index fiber (GIF), and the proposed SI-DCF. In comparison with the commonly used fiber geometry, the SI-DCF can reduce the MFD expansion ratio from 77.73% to 38.81%, leading to more than half reduction of the tapering length for both 3-mode and 6-mode PLs. Then, two kinds of SI-DCF with different core diameters are fabricated to realize a 3-mode PL. The fabricated PL possesses a 1.5 cm tapering length and less than 0.2 dB insertion loss (IL). After splicing with the commercial few-mode fiber, the PL has an average IL of 0.6 dB and more than 13 dB LP11 mode purity over the C-band. Finally, a transfer matrix measurement indicates that the fabricated PLs have a mode coupling of less than -10 dB at 1550 nm.

Noise Tolerant Photonic Bowtie Grating Environmental Sensor.

Resonant photonic refractive index sensors have made major advances based on their high sensitivity and contact-less readout capability, which is advantageous in many areas of science and technology. A major issue for the technological implementation of such sensors is their response to external influences, such as vibrations and temperature variations; the more sensitive a sensor, the more susceptible it also becomes to external influences. Here, we introduce a novel bowtie-shaped sensor that is highly responsive to refractive index variations while compensating for temperature changes and mechanical (linear and angular) vibrations. We exemplify its capability by demonstrating the detection of salinity to a precision of 0.1%, corresponding to 2.3 × 10-4 refractive index units in the presence of temperature fluctuations and mechanical vibrations. As a second exemplar, we detected bacteria growth in a pilot industrial environment. Our results demonstrate that it is possible to translate high sensitivity resonant photonic refractive index sensors into real-world environments.

Interferometer-based chemical sensor on chip with enhanced responsivity and low-cost interrogation

We report experimental results of an interferometric chemical sensor integrated on a silicon chip. The sensor measures refractive index variations of the liquid that contacts exposed spiraled silicon waveguides on one branch of a Mach-Zehnder interferometer. The system requires neither laser tuning nor spectral analysis, but a laser at a fixed wavelength, and a demodulation architecture that includes an internal phase modulator and a real-time processing algorithm based on multitone mixing. Two devices are compared in terms of sensitivity and noise, one at 1550 nm wavelength and TE polarization, and an optimized device at 1310 nm and TM polarization, which shows 3 times higher sensitivity and a limit of detection of 2.24·10−7 RIU.

Discrimination of hydration states of hydrated salts using terahertz time-domain spectroscopy

Water-sensitive nature of terahertz radiation has been exploited here to discriminate the hydration states of different hydrated salts, such as Cobalt Chloride Hexahydrate (CoCl2.6H2O), Copper Sulfate Pentahydrate (CuSO4.5H2O), Magnesium Chloride Hexahydrate (MgCl2.6H2O), and Calcium Chloride Dihydrate (CaCl2.2H2O). Hydration states of these salts have been prepared by heating them in an oven at different temperature for specific time on the basis of thermo-gravimetric analysis. The prepared samples were analyzed using terahertz time-domain spectroscopy (THz-TDS). The variation in absorption coefficient and refractive indices of these hydrated salts in terahertz spectral regime (0.2–1.6 THz) are linked with the change of hydration states, which has been used for their discrimination. The results have been validated with X-ray diffraction analysis. The present work indicates that THz-TDs can be considered a promising technique to fulfill the ever increasing demand of the analysis of these hydrated salts.

Birefringence mapping of biological tissues based on polarization sensitive non-interferometric quantitative phase imaging technique

ObjectiveOral cancer is a leading cause of mortality globally, particularly affecting developing regions where oral hygiene is often overlooked. The optical properties of tissues are vital for diagnostics, with polarization imaging emerging as a label-free, contrast-enhancing technique widely employed in medical and scientific research over past few decades. Materials and methodsWe present a novel polarization sensitive quantitative phase imaging of biological tissues by incorporating the conventional polarization microscope and transport of intensity equation-based phase retrieval algorithm. This integration provides access to the birefringence mapping of biological tissues. The inherent optical anisotropy in biological tissues induces the polarization dependent refractive index variations which can provide the detailed insights into the birefringence characteristics of their extracellular constituents. Experimental investigations were conducted on both normal and cancerous oral tissue samples by recording a set of three polarization intensity images for each case with a step size of 2 μm. ResultsA noteworthy increment in birefringence quantification was observed in cancerous as compared to the normal tissues, attributed to the proliferation of abnormal cells during cancer progression.The mean birefringence values were calculated for both normal and cancerous tissues, revealing a significant increase in birefringence of cancerous tissues (2.1 ± 0.2) × 10−2 compared to normal tissues (0.8 ± 0.2) × 10−2. Data were collected from 8 patients in each group under identical experimental conditions. ConclusionThis polarization sensitive non-interferometric optical approach demonstrated effective discrimination between cancerous and normal tissues, with various parameters indicating elevated values in cancerous tissues.

A polynomial model with line-of-sight constraints for Lagrangian particle tracking under interface refraction

This paper introduces an improvement of the ‘shake-the-box (STB)’ (Schanz, Gesemann, and Schröder, Exp. Fluids 57.5, 2016) technique using the polynomial calibration model and the line-of-sight constraints (LOSC) to overcome the refractive interface issues in Lagrangian particle tracking (LPT) measurement. The method (named LOSC-LPT) draws inspiration from the two-plane polynomial camera calibration in tomographic particle image velocimetry (Worth, Nickels, Thesis, 2010) and the STB-based open-source Lagrangian particle tracking (OpenLPT) framework (Tan, Salibindla, Masuk, and Ni, Exp. Fluids 61.2, 2019). The LOSC-LPT introduces polynomial mapping functions into STB calibration in conditions involving gas–solid–liquid interfaces at container walls exhibiting large refractive index variations, which facilitates the realization of particle stereo matching, three-dimensional (3D) triangulation, iterative particle reconstruction, and further refinement of 3D particle position by shaking the LOS. Performance evaluation based on synthetic noise-free images with a particle image density of 0.05 particle per pixel in the presence of refractive interfaces demonstrates that LOSC-LPT can detect a higher number of particles and exhibits lower position uncertainty in the reconstructed particles, resulting in higher accuracy and robustness than that achieved with OpenLPT. In the application to an elliptical jet flow in an octagonal tank with refractive interfaces, the use of polynomial mapping results in smaller errors (mean calibration error <0.1 px) and thus more long trajectories identified by LOSC-LPT (13 000) compared with OpenLPT (4500) which uses the pinhole Tsai model (mean calibration error >1.0 px). Moreover, 3D flow-field reconstructions demonstrate that the LOSC-LPT framework can recover a more accurate 3D Eulerian flow field and capture more complete coherent structures in the flow, and thus holds great potential for widespread application in 3D experimental fluid measurements.

Biomimetic Anticoagulated Porous Particles with Self-Reporting Structural Colors.

Anticoagulation is vital to maintain blood fluidic status and physiological functions in the field of clinical blood-related procedures. Here, novel biomimetic anticoagulated porous inverse opal hydrogel particles is presented as anticoagulant bearing dynamic screening capability. The inverse opal hydrogel particles possess abundant sulfonic and carboxyl groups, which serve as binding sites with multiple coagulation factors and inhibit the blood coagulation process. Owing to the variations of refractive index and pore sizes during the binding process, the particles appeared corresponding structure color variations, which can be adopted as sensory index of anticoagulation. Based on these features, a sensor containing these diverse structure color particle units is constructed for pattern recognition of coagulation factors level in clinical plasma samples. By analyzing the sensory information of the unit, the colorimetric "fingerprint" for each target can be obtained and summarized as a database. Besides, a portable test-strip integrating sensory units is developed to distinguish the sample regarding abnormal coagulation factors-derived diseases via multivariate data analysis. It is believed that such biomimetic anticoagulated structural color particles and their derived sensor will open new avenue for clinical detection and disease diagnosis.

A Regional Aerosol Model for the Oceanic Area around Eastern China Based on Aerosol Robotic Network (AERONET)

A regional aerosol model can complement globally averaged models and improve the accuracy of atmospheric numerical models in local applications. This study established a seasonal aerosol model based on data from the Aerosol Robotic Network (AERONET) of the sea area around eastern China, and its performance in calculating the aerosol optical depth (AOD) was evaluated. The seasonal columnar volume particle size distributions (VPSDs) illustrated a bimodal structure consisting of fine and coarse modes. The VPSDs of spring, autumn, and winter roughly agreed with each other, with their amplitudes of fine and coarse modes being almost equal; however, the fine mode of the summer VPSD was approximately twice as high as that of the coarse mode. Lognormal mode decomposition analysis revealed that fine and coarse modes comprised two sub-modes. Fitting the seasonal VPSDs to the four-mode lognormal distribution yielded a parameterized aerosol size distribution model. Furthermore, seasonal variations in complex refractive indices (CRIs) indicated unignorable changes in aerosol compositions. Overall, error analysis validated that the proposed model could meet accuracy requirements for optical engineering applications, with median AOD calculation errors of less than 0.01.

An in-depth look at the structural, electronic, optical, and thermal properties of the cubic Be x Mg y Zn1−x−y O quaternary alloys

In the present research work, the structural, electrical, optical, and thermodynamic properties of the BexMgyZn1−x-yO quaternary alloy were investigated. Its conventional structure, which is composed of the binary compounds ZnO, BeO, and MgO, and their ordered ternary alloys BexZn1−xO, BexMg1−xO, and MgxZn1−xO are examined. A non-linear variation of lattice constants (a) and bulk modulus (B) as a function of the compositions (x, y) in BexMgyZn1−x-yO alloys is observed due to varying atomic radii of the constituent elements leading to the structural distortion against compositional changes. Both the ternary and quaternary alloys exhibit semiconducting properties, characterized by a direct bandgap ranging from 2–4 eV. This indicates their absorption and emission of light in the visible region of the spectrum, making them promising candidates for optoelectronic applications. The results of optical characteristics display the variation of refractive index and absorption coefficient of these alloys with respect to composition and wavelength. Present results will forecast the possible applications and guidelines for synthesizing such alloys under extreme conditions.

Influence of pressure and temperature on the magneto-optical properties and Aharonov-Bohm oscillations of a quantum ring

We theoretically investigated the influence of pressure and temperature on the electronic and optical properties of a GaAs /Al0.3Ga0.7As quantum ring, described by a combination of a parabolic potential and an inverse square one, in the presence of the magnetic field. The results reveal a variation with pressure and temperature of the period of Aharonov-Bohm oscillations appearing in the electronic spectra in magnetic field. This period varies nonlinearly with pressure and temperature. In the absorption spectra and refractive index variation at 4 K, we found that with the increment of the magnetic field or of the pressure more transitions are allowed. When no external pressure is applied, the absorption maxima shift to lower energies at increasing magnetic field, but with increasing pressure, the absorption maxima red-shift at intermediate magnetic fields and blue-shift at high fields.

All-dielectric high-NA achromatic metalenses in the mid-infrared band based on subregions.

For conventional refractive lenses, chromatic aberration inevitably occurs due to the refractive index variation of the lens material with the incident wavelength, leading to axial aberrations and lower imaging system quality. Achromatic metalenses have demonstrated a great capability to solve this problem and been extensively investigated. However, the metalens achromatic method involves construction of a unit structure satisfying a phase distribution greater than 0-2π or phase compensation. Although this design method can obtain a good achromatic effect, finding a unit that satisfies a linear distribution during design is difficult. In this paper, we use subregion discrete wavelength modulation to achieve broadband achromatism. The total number of structural units in each region is optimized for different incident wavelengths, and the internal and external ring unit structures are also optimized. This achromatic metalens exhibits a large aperture and a high numerical aperture in the 4.2-4.7µm mid-infrared band (NA=0.83). Our research has strong potential and application prospects in ultracompact imaging and laser beam shaping.

Nanofabrication Process Scale-Up via Displacement Talbot Lithography of a Plasmonic Metasurface for Sensing Applications

The selection of an affordable method to fabricate plasmonic metasurfaces needs to guarantee complex control over both tunability and reproducibility of their spectral and morphological properties, making plasmonic metasurfaces suitable for integration into different sensing devices. Displacement Talbot lithography could be a valid solution thanks to the limited fabrication steps required, also providing the highly desired industrial scalability. Fabricated plasmonic metasurfaces are represented by a gold nanohole array on a glass substrate based on a triangular pattern. Scanning electron microscopy measurements have been recorded, showing the consistency of the surface features with the optimized design parameters. Reflectance and transmittance measurements have also been carried out to test the reliability and standardization of the metasurface’s optical response. Furthermore, these plasmonic metasurfaces have also been successfully tested for probing refractive index variations in a microfluidic system, paving the way for their use in sensitive, real-time, label-free, and multiplexing detection of bio-molecular events.

Guided wave resonance-based digital holographic microscopy for high-sensitivity monitoring of the refractive index.

Surface plasmon resonance holographic microscopy (SPRHM) has been employed to measure the refractive index but whose performance is generally limited by the metallic intrinsic loss. Herein we first, to our knowledge, utilize guided wave resonance (GWR) with low loss to realize the monitoring of the refractive index by integrating with digital holographic microscopy (DHM). By depositing a dielectric layer on a silver film, we observe a typical GWR in the dielectric layer with stronger field enhancement and higher sensitivity to the surrounding refractive index compared to the silver film-supported SPR, which agrees well with calculations. The innovative combination of the GWR and DHM contributes to the highly sensitive dynamic monitoring of the surrounding refractive index variation. Through the measurement with DHM, we found that the GWR presents an excellent sensitivity, which is 2.6 times higher than that of the SPR on the silver film. The results will pave a new pathway for digital holographic interferometry and its applications in environmental and biological detections.

Customized linear refractive index GRIN prepared by rapid sintering of multilayer chalcogenide glass powders

AbstractGradient refractive index (GRIN) lenses have recently become a hot topic in compact imaging and achromaticity. Current research focuses on exploiting GRIN materials and upgrading the preparation technology. In this study, infrared (IR) GRIN materials were successfully prepared by spark plasma sintering of multilayer chalcogenide glass (ChGs) powders. ChGs powders were derived from the Ge20Se80‐xTex series glasses (x = 0–28 mol%) with a maximum refractive index difference (Δn) of 0.25. The similar glass transition temperatures (ΔTg &lt; 10°C) promote efficient sintering of multilayer powders. Six‐, eight‐, and ten‐layer powders of different compositions were rapidly sintered with a thickness of 600, 300, and 200 µm per layer, respectively. Such tiny layer thickness enables the GRIN materials to exhibit nearly linear refractive index variation. Energy dispersive spectroscopy line scans well characterized the gradient variation of GRIN. The maximum deviation of the refractive index gradient from the fitted target line was only ± 0.016 for the 10‐layer GRIN. The sintered GRIN shows excellent IR transparency, which is of great interest for mid‐wave and long‐wave infrared imaging.

Spatial Fluctuations of Optical Turbulence Strength in a Laboratory Turbulence Simulator

Controlled turbulence simulators in the laboratory have been extensively employed to investigate turbulence effects on light propagation in the atmosphere, driven by some advanced optical engineering such as remote sensing, energy-delivery systems, and free-space optical communication systems. Many studies have achieved rich results on the optical turbulence intensity, scintillation index, and power spectral density characteristics of the light propagation path in the center of a turbulence simulator, but a comprehensive analysis of the optical turbulence characteristics for different spatial locations is still lacking. We simulate turbulence with air as the medium in a classical convective Rayleigh–Bénard turbulence simulator through high-resolution computational fluid dynamics methods, the three-dimensional refractive index distribution is obtained, and the optical properties are analyzed comprehensively. It is found that the hot and cold plumes and the large-scale circulation strongly influence the inhomogeneity of Cn2 in the turbulence tank, making it weak in the middle and strong near the boundary. The refractive index power spectral density at different heights is centrally symmetric, with the slope gradually deviating from the −5/3 scaling power with increasing distance from the central region. Under the log-log plot, the variation of the refractive index variance with height exhibits a three-segmented feature, showing in order: a stable region, a logarithmic profile, and a power-law profile, in the region close to the boundary. These results will contribute to the construction of a suitable turbulence simulator for optical engineering applications.

Highly sensitive refractometric sensing system based on the combination of lensing and laser speckle correlation

A simple optical sensing system based on laser speckle and lensing for monitoring refractive index variations of fluids is proposed and demonstrated. The fluid of interest is contained in a cylindrical glass vessel, which acts as an optical lens whose focal length depends on the refractive index of the fluid. Focal length variations imply optical wavefront alterations that are revealed through laser speckle pattern correlation. The device exhibits a refractive index resolution on the order of 10−6, which is comparable to those of more complex and costly refractometric sensors and demonstrates the benefits of combining these two optical techniques. The simplicity and high sensitivity of the presented configuration make it greatly suitable for a variety of applications ranging from chemical sensing to specimen detection.

Control of Liquid–Liquid Phase Separation, Nucleation, and Growth of L‐Menthol Single Crystals from Water–Ethanol Solvent Mixtures

AbstractL‐Menthol is a commonly used material in food production for flavor enhancement and fragrances, as well as in pharmaceuticals. However, during the solution crystallization process of L‐menthol, there is a major issue of oiling out or liquid–liquid phase separation (LLPS) in most organic solvents and their mixtures. The objective of the current work is to prevent the LLPS phenomenon and grow high‐quality single crystals of L‐menthol. A water–ethanol mixed solvent with nine different mixing ratios is used, ranging from 0.99W:0.01E to 0.91W:0.09E, through the conventional slow evaporation process. The findings indicate that the mixing composition of the solvent plays a significant role in the variation of solubility, refractive index, LLPS, nucleation, and crystallization. This is clearly demonstrated in the phase diagram. The occurrence of LLPS phenomenon, nucleation, growth behavior, and morphology of L‐menthol single crystals through optical microscopy is identified. Additionally, the internal structure and thermal stability of the grown polymorphs using PXRD, SCXRD, and DSC analyses are confirmed.

Conventional band demultiplexer with high quality factor and transmission power based on four optimized shaped photonic crystal resonators

Abstract In this work, we propose a new filter design based on a ring resonator. This structure has 99% transmission ratio and high sensitivity to detect small refractive index variations of the order of 0.002. More specifically, the small size of this resonator gives the advantage to model a demultiplexer of size 463 µm2 based on four ports which operates in the conventional transmission band. Also, we show that our demultiplexer structure can reach more than 90% transmission ratio with an optical quality factor of about 3800, the spectral width is 0.72 nm and a crosstalk between −13.28 and −32.13. In our study, we emphasized the plane wave method to study the photonic band gap and FDTD to determine the transmission spectrum.

Strip-loaded Mach–Zehnder interferometer for absolute refractive index sensing

This paper presents the design, fabrication, and characterization of a Mach–Zehnder interferometer (MZI) on a strip-loaded platform specifically developed for the measurement of refractive index variations in liquids. A novel approach of large opening in the sensing region enhances the sensitivity by using the analyte as the loading strip. This allows surpassing the performances of the conventional perforations and trenched-based MZIs and prevent protecting the reference arm. The implementation of this design resulted in a high confinement factor of approximately 23%\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\%$$\\end{document} in the cladding, enabling an effective interaction between the evanescent field and analyte. Ethanol-water solutions with varying concentrations were used as analyte for the characterization of the device. The strip-loaded waveguide was a 200 nm TiO2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$_2$$\\end{document} thin film on a silicon dioxide wafer and a 1.2 μ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\upmu $$\\end{document}m wide for 800 nm-thick nLOF resist served as loading strip. The sensing area featured a 10 μ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\upmu $$\\end{document}m wide open-ing in the loading material with a sensing length of 5 mm. The homogeneous sensitivity was experimentally determined to be 0.128, demonstrating the effectiveness of the proposed design, which enabled a refractive index change monitoring of 10-6\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{-6}$$\\end{document}.

Enhancement in the magneto-optical effect induced by combining multiple modes in a gold film–supported hybrid periodic gold/magnetic nanorod array

In this study, the possibility of enhanced transverse magneto-optical Kerr effect (TMOKE) and performance monitoring of a hybrid nanostructure developed by sandwiching a ferromagnetic film within a gold layer and square periodic nanorod arrays, is theoretically investigated. Based on the findings, the TMOKE signal can be enhanced approximately 33 times when compared to the referenced planar film, which is elucidated by the hybrid of modes in the magnetic film region. In addition, a high level of environmental sensor performance is simultaneously achieved by recording the wavelength resonance positions with the variation of refractive index, which is compatible with gaseous medium from 1 to 1.01, indicating that the structure of the proposal will have applications in environmental monitoring.