Reflection Surface-enhanced Infrared Absorption Spectroscopy Research Articles

Enhancing Electrocatalytic CO2-to-CO Conversion by Weakening CO Binding through Nitrogen Integration in the Metallic Fe Catalyst.

Metallic iron (Fe) typically demonstrates the unfavorable catalytic activity for the CO2 reduction reaction (CO2RR), mainly attributed to the excessively strong binding of CO products on Fe sites. Toward this end, we employed an effective approach involving electronic structure modulation through nitrogen (N) integration to enhance the performance of the CO2RR. Here, an efficient catalyst has been developed, composed of N-doped metallic iron (Fe) nanoparticles encapsulated in a porous N-doped carbon framework. Notably, this N-integrated Fe catalyst displays significantly enhanced performance in the electrocatalytic reduction of CO2, yielding the highest CO Faradaic efficiency of 97.5% with a current density of 6.68 mA cm-2 at -0.7 V versus the reversible hydrogen electrode. The theoretical calculations, combined with the in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy study, reveal that N integration modulates the electron density around Fe, resulting in the weakening of the binding strength between the Fe active sites and *CO intermediates, consequently promoting the desorption of CO and the overall CO2RR process.

Tailoring the catalytic microenvironment of CuO with hydrophobic CuSA2 for selective CO2 electroreduction to C2+ products

Advancing the Faraday efficiency (FE) and current density of Cu catalyzed electrochemical CO2 reduction (ECR) reaction to produce C2+ products is important for its practical applications. Constructing a hydrophobic interface to regulate the local reaction environment is an effective method to improve the selectivity of C2+ products, but it is limited by the low reaction current density. In this work, we fabricated a novel hydrophobic and ECR active copper stearate (CuSA2) decorated CuO nanoparticle catalyst (CuO/CuSA2) for ECR reaction toward C2+ products. As a result, the CuO/CuSA2 catalyst achieved an FE of 61.33 % and a partial current density of 429.33 mA cm−2 for C2+ products. The CuSA2 and CuO nanoparticle cooperate very well for the formation of C2+ products. The in-situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) and electrochemical adsorption experiments indicated that the hydrophobic CuSA2 regulated the local ECR reaction environment. The local ∗CO2.- and *CO adsorption were strengthened by hydrophobic CuSA2 modification while the H2O adsorption was inhibited. CuO nanoparticle promotes *CO coupling reaction and enhances C2 intermediates (*OCCOH and *OC2H5) adsorption. Hydrophobic CuSA2 and CuO nanoparticle synergistically promote the generation of C2+ products. This work provides new insights into the design of hydrophobic CO2 reduction electrocatalysts for the preparation of C2+ products.

Molecular tuning boosts asymmetric C-C coupling for CO conversion to acetate.

Electrochemical carbon dioxide/carbon monoxide reduction reaction offers a promising route to synthesize fuels and value-added chemicals, unfortunately their activities and selectivities remain unsatisfactory. Here, we present a general surface molecular tuning strategy by modifying Cu2O with a molecular pyridine-derivative. The surface modified Cu2O nanocubes by 4-mercaptopyridine display a high Faradaic efficiency of greater than 60% in electrochemical carbon monoxide reduction reaction to acetate with a current density as large as 380 mA/cm2 in a liquid electrolyte flow cell. In-situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy reveals stronger *CO signal with bridge configuration and stronger *OCCHO signal over modified Cu2O nanocubes by 4-mercaptopyridine than unmodified Cu2O nanocubes during electrochemical CO reduction. Density function theory calculations disclose that local molecular tuning can effectively regulate the electronic structure of copper catalyst, enhancing *CO and *CHO intermediates adsorption by the stabilization effect through hydrogen bonding, which can greatly promote asymmetric *CO-*CHO coupling in electrochemical carbon monoxide reduction reaction.

Enhanced Electrochemical CO2 Reduction to Formate over Phosphate-Modified In: Water Activation and Active Site Tuning.

Electrochemical CO2 reduction reaction (CO2RR) offers a sustainable strategy for producing fuels and chemicals. However, it suffers from sluggish CO2 activation and slow water dissociation. In this work, we construct a (P-O)δ- modified In catalyst that exhibits high activity and selectivity in electrochemical CO2 reduction to formate. A combination of in-situ characterizations and kinetic analyses indicate that (P-O)δ- has a strong interaction with K+(H2O)n, which effectively accelerates water dissociation to provide protons. In-situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) measurements together with density functional theory (DFT) calculations disclose that (P-O)δ- modification leads to a higher valence state of In active site, thus promoting CO2 activation and HCOO* formation, while inhibiting competitive hydrogen evolution reaction (HER). As a result, the (P-O)δ- modified oxide-derived In catalyst exhibits excellent formate selectivity across a broad potential window with a formate Faradaic efficiency as high as 92.1% at a partial current density of ~200 mA cm-2 and a cathodic potential of -1.2 V vs. RHE in an alkaline electrolyte.

ATR-SEIRAS Method to Measure Interfacial pH during Electrocatalytic Nitrate Reduction on Cu

This study reports the accuracy and applications of an attenuated total reflectance–surface-enhanced infrared absorption spectroscopy (ATR–SEIRAS) technique to indirectly measure the interfacial pH of the electrolyte within 10 nm of the electrocatalyst surface. This technique can be used in situ to study aqueous electrochemical reactions with a calibration range from pH 1–13, time resolution down to 4 s, and an average 95% confidence interval of 14% that varies depending on the pH region (acidic, neutral, or basic). The method is applied here to electrochemical nitrate reduction at a copper cathode to demonstrate its capabilities, but is broadly applicable to any aqueous electrochemical reaction (such as hydrogen evolution, carbon dioxide reduction, or oxygen evolution) and the electrocatalyst may be any SEIRAS-active thin film (e.g., silver, gold, or copper). The time-resolved results show a dramatic increase in the interfacial pH from pH 2–7 in the first minute of operation during both constant current and pulsed current experiments where the bulk pH is unchanged. Attempts to control the pH polarization at the surface by altering the electrochemical operating conditions—lowering the current or increasing the pulse frequency—showed no significant change, demonstrating the challenge of controlling the interfacial pH.

Modulating surface microenvironment based on Ag-adorned CuO flower-liked nanospheres for strengthening C-‍C coupling during CO2RR

Modulating the surface microenvironment is crucial in strengthening CC coupling, leading to increasing selectivity in the production of multi-carbon (C2+) products during CO2 electroreduction. Herein, we have concentrated on investigating how to control the effect of surface distribution of active components of a series of Ag-decorated CuO, denoted as xAg/yCuO. These catalysts with similar chemical elements and morphology are designed, but they exhibit different selectivity in the CO2 electroreduction process. As a result, the Ag particles in 3Ag/CuO aggregates, while the Ag in 2Ag/2CuO and Ag/3CuO is uniformly distributed on the flower-like CuO nanosphere. Besides, 3Ag/CuO has the highest Faraday efficiency (FE) of CO with a value of 30.9 % at 0.8 V vs. RHE, demonstrating rich-Ag catalysts are beneficial to produce CO. 2Ag/2CuO shows excellent FEC2H4 of 51.4 % at -1.2 V vs. RHE due to the highly dispersed distribution of Ag on the flower-like CuO and higher vacancy O. Ag/3CuO exhibits higher FEH2 compared to other catalysts across a wide potential range, and its minimal impedance is attributed to its exceptional performance in the hydrogen evolution reaction. The proposed reaction pathway for the most effective catalysts 2Ag/2CuO, as determined by in-situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS), involves the following steps: CO2 →*CO2−→ *COOH → *CO→ *CHO→ *OCHCHO→ *OCHCH2→ C2H4. These findings demonstrate that controlling the surface structure can influence the local environment to enhance the efficiency of CO2 electroreduction.

Novel water/oxygen cycle reaction photo fuel cell for solar conversion and pollutant detection: Based on selective 2-electron collaborative catalysis process

New typed photovoltaic devices, represented by water/oxygen cycle based photo fuel cells (PFCs) as a promising strategy to resolve the fossil energy crisis, have attracted extensive attention for the ideal photo energy conversion and utilization efficiency, spontaneous operation, and miniaturized devices. However, they still have limitations such as low oxygen reduction efficiency and poor stability caused by the complex structure of the cathode. In this work, a synergetic and fast 2-electron water/oxygen cycle reaction based dual-photoelectrode fuel cell (DPFC) is constructed with molecularly imprinted (MI)-CdS/ZnO nanorods (NRs) as photoanode and p-type organic semiconductor polythiophene (pTTh) as photocathode for the first time. The larger self-bias and simple structure endow the device higher open circuit potential (EOCV = 1.07 ± 0.08 V) and ideal output power density (Pmax = 60.5 ± 2.1 μW·cm−2). Attributed to the synergistic reaction effects, the 2-electron water/oxygen cycle is realized by the photocathode-generated H2O2 to serve as shuttle molecule, with outstanding cyclic stability (96 %) in 64 h continuous irradiation. Moreover, a portable self-powered sensor for the typical environmental pollutant atrazine is successfully developed based on this DPFC. A very wide concentration range (0.002 to 50 nM) and a super low detection limit (0.19 pM) is achived via a digital multimeter without the assistance of any signal amplifier. The mechanism, pathway, and active site of the selective reduction process are studied by the attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS). This work has proposed a cheap and regulatable new way to convert and utilize solar energy and provided theoretical guidance for achieving economic power generation and the sensing strategy of self-powered sensors.

Nanostructured Black Silicon as a Stable and Surface-Sensitive Platform for Time-Resolved In Situ Electrochemical Infrared Absorption Spectroscopy.

Attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) is a powerful method for probing interfacial chemical processes. However, SEIRAS-active nanostructured metallic thin films for the in situ analysis of electrochemical phenomena are often unstable under biased aqueous conditions. In this work, we present a surface-enhancing structure based on etched black Si internal reflection elements with Au-coatings for in situ electrochemical ATR-SEIRAS. Using electrochemical potential-dependent adsorption and desorption of 4-methoxypyridine on Au, we demonstrate that black Si-based substrates offer advantages over commonly used structures, such as electroless-deposited Au on Si and electrodeposited Au on ITO-coated Si, due to the combination of high stability, sensitivity, and conductivity. These characteristics are especially valuable for time-resolved measurements where stable substrates are required over extended times. Furthermore, the low sheet resistance of Au layers on black Si reduces the RC time constant of the electrochemical cell, enabling a significantly higher time resolution compared to that of traditional substrates. Thus, we employ black Si-based substrates in conjunction with rapid- and step-scan Fourier transform infrared (FTIR) spectroscopy to investigate the adsorption and desorption kinetics of 4-methoxypyridine during in situ electrochemical potential steps. Adsorption is shown to be diffusion-limited, which allows for the determination of the mean molecular area in a fully established monolayer. Moreover, no significant changes in the peak ratios of vibrational modes with different orientations relative to the molecular axis are observed, suggesting a single adsorption mode and no alteration of the average molecular orientation during the adsorption process. Overall, this study highlights the enhanced performance of black Si-based substrates for both steady-state and time-resolved in situ electrochemical ATR-SEIRAS, providing a powerful platform for kinetic and mechanistic investigations of electrochemical interfaces.

Kinetics Conditioning of (Electro) Chemically Stable Zn Anode with pH Regulation Toward Long-Life Zn-Storage Devices.

The safety, low cost, and high power density of aqueous Zn-based devices (AZDs) appeal to large-scale energy storage. Yet, the presence of hydrogen evolution reaction (HER) and chemical corrosion in the AZDs leads to local OH- concentration increasement and the formation of Znx SOy (OH)z •nH2 O (ZHS) by-products at the Zn/electrolyte interface, causing instability and irreversibility of the Zn-anodes. Here, a strategy is proposed to regulate OH- by introducing a bio-sourced/renewable polypeptide (ɛ-PL) as a pH regulator in electrolyte. The consumption of OH- species is evaluated through in vitro titration and cell in vivo in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy at a macroscopic and molecular level. The introduction of ɛ-PL is found to significantly suppress the formation of ZHS and associated side reactions, and reduce the local coordinated H2 O of the Zn2+ solvation shell, widening electrochemical stable window and suppressing OH- generation during HER. As a result, the inclusion of ɛ-PL improves the cycle time of Zn/Zn symmetrical cells from 15 to 225h and enhances the cycle time of aqueous Zn- I2 cells to 1650h compared to those with pristine electrolytes. This work highlights the potential of kinetical OH- regulation for by-product and dendrite-free AZDs.

Insight into the Structure of Mn-NiS2 during Urea Oxidation Using Combined In Situ X-ray Absorption Spectroscopy and Attenuated Total Reflectance Surface-Enhanced Infrared Absorption Spectroscopy

Insight into the Structure of Mn-NiS₂ during Urea Oxidation Using Combined In Situ X-ray Absorption Spectroscopy and Attenuated Total Reflectance Surface-Enhanced Infrared Absorption Spectroscopy

Spectroelectrochemical determination of thiolate self-assembled monolayer adsorptive stability in aqueous and non-aqueous electrolytes.

Self-assembled monolayers (SAM) are ubiquitous in studies of modified electrodes for sensing, electrocatalysis, and environmental and energy applications. However, determining their adsorptive stability is crucial to ensure robust experiments. In this work, the stable potential window (SPW) in which a SAM-covered electrode can function without inducing SAM desorption was determined for aromatic SAMs on gold electrodes in aqueous and non-aqueous solvents. The SPWs were determined by employing cyclic voltammetry, attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS), and surface plasmon resonance (SPR). The electrochemical and spectroscopic findings concluded that all the aromatic SAMs used displayed similar trends and SPWs. In aqueous systems, the SPW lies between the reductive desorption and oxidative desorption, with pH being the decisive factor affecting the range of the SPW, with the widest SPW observed at pH 1. In the non-aqueous electrolytes, the desorption of SAMs was observed to be slow and progressive. The polarity of the solvent was the main factor in determining the SPW. The lower the polarity of the solvent, the larger the SPW, with 1-butanol displaying the widest SPW. This work showcases the power of spectroelectrochemical analysis and provides ample future directions for the use of non-polar solvents to increase SAM stability in electrochemical applications.

Exploration of a novel electrochemical C[sbnd]N coupling process: Urea synthesis from direct air carbon capture with nitrate wastewater

Direct air capture (DAC) can be used to decrease the CO2 concentration in the atmosphere, but this requires substantial energy consumption. If residual waste carbon (in the form of bicarbonate solution) from DAC can be directly reused, it might present a novel method for overcoming the aforementioned challenges. Electrochemical CN coupling methods for synthesizing urea have garnered considerable attention for waste carbon utilization, but the carbon source is high-purity CO2. No research has been conducted regarding the application of bicarbonate solution as the carbon source. This study proposes a proof-of-concept electrochemical CN coupling process for synthesizing urea using bicarbonate solution from DAC as the carbon source and nitrate from wastewater as the nitrogen source. These results confirmed the feasibility of synthesizing urea using a three-electrode system employing TF and CuInS2/TF as the working electrodes via potentiostatic electrolysis. Under the optimal conditions (initial pH 5.0 and applied potential of −1.3 V vs. Ag/AgCl), the urea yield after 2 h of electrolysis reached 3017.2 μg h−1 mgcat.−1 and an average Faradaic efficiency of 19.6 %. The in-situ attenuated total reflection surface-enhanced infrared absorption spectroscopy indicated a gradual increase in the intensity of the -CONH bond signal on the surface of the CuInS2/TF electrode as the reaction progressed. This implied that this bond may be a key chemical group in this process. The density functional theory calculations demonstrated that *CONH was a pivotal intermediate during CN coupling, and a two-step CN coupling reaction path was proposed. *NH + *CO primarily transformed into *CONH, followed by the conversion reaction of *CONH + *NO to *NOCONH2. This study offers a groundbreaking approach for waste carbon utilization from DAC and holds the potential to furnish technical underpinnings for advancing electrochemical CN coupling methods.

Investigating the Electrochemical CO2 Reduction Mechanism on Oxide-Derived Copper Using in Situ FTIR Spectroscopy

Oxide-derived copper (OD-Cu) electrocatalysts have been extensively used for CO2 reduction reaction (CO2RR) applications in recent years due to their capability to selectively produce valuable C2 compounds. The mechanism of CO2 reduction on these surfaces, however, is still not clearly understood. Using in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS), we show how the copper pre-oxidation process can significantly influence the adsorption of various CO2RR intermediates. Upon mildly anodizing a Cu thin film, we observed a redshift on the *CO2 – band, indicating that the initial CO2 adsorption and activation step is promoted on the oxide-derived surface. Additionally, we observed a faster growth of the *COatop band for the anodized copper film at low overpotentials, which demonstrates how a high *CO coverage can be achieved on OD-Cu. Finally, for the first time, we observed the simultaneous formation of two bands at 1327 cm–1 and 1425 cm–1 on the anodized Cu thin film. Using DFT calculations, we show that these bands match the theoretical vibrational frequencies of the *COCHO dimer, a key intermediate of the C2 pathway. Furthermore, our calculations show that the thermodynamics of *CO and *CHO coupling can be improved in the presence of the subsurface oxygen sites in OD-Cu. Our findings reveal the different aspects through which the CO2 reduction mechanism can be improved on OD-Cu electrocatalysts as compared to metallic copper.This work was financially supported by the Research Grants Council (16310419, 16309418, and 16304821) and the Innovation and Technology Commission (grant no. ITC-CNERC14EG03).

Elucidating the structure-stability relationship of Cu single-atom catalysts using operando surface-enhanced infrared absorption spectroscopy

Understanding the structure-stability relationship of catalysts is imperative for the development of high-performance electrocatalytic devices. Herein, we utilize operando attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) to quantitatively monitor the evolution of Cu single-atom catalysts (SACs) during the electrochemical reduction of CO2 (CO2RR). Cu SACs are converted into 2-nm Cu nanoparticles through a reconstruction process during CO2RR. The evolution rate of Cu SACs is highly dependent on the substrates of the catalysts due to the coordination difference. Density functional theory calculations demonstrate that the stability of Cu SACs is highly dependent on their formation energy, which can be manipulated by controlling the affinity between Cu sites and substrates. This work highlights the use of operando ATR-SEIRAS to achieve mechanistic understanding of structure-stability relationship for long-term applications.

Selective CO2 -to-Syngas Conversion Enabled by Bimetallic Gold/Zinc Sites in Partially Reduced Gold/Zinc Oxide Arrays.

Electrocatalytic CO2 -to-syngas (gaseous mixture of CO and H2 ) is a promising way to curb excessive CO2 emission and the greenhouse gas effect. Herein, we present a bimetallic AuZn@ZnO (AuZn/ZnO) catalyst with high efficiency and durability for the electrocatalytic reduction of CO2 and H2 O, which enables a high Faradaic efficiency of 66.4 % for CO and 26.5 % for H2 and 3 h stability of CO2 -to-syngas at -0.9 V vs. the reversible hydrogen electrode (RHE). The CO/H2 ratios show a wide range from 0.25 to 2.50 over a narrow potential window (-0.7 V to -1.1 V vs. RHE). In situ attenuated total reflection surface-enhanced infrared absorption spectroscopy combined with density functional theory calculations reveals that the bimetallic synergistic effect between Au and Zn sites lowers the activation energy barrier of CO2 molecules and facilitates electronic transfer, further highlighting the potential to control CO/H2 ratios for efficient syngas production using the coexisting Au sites and Zn sites.

Atomic high-spin cobalt(II) center for highly selective electrochemical CO reduction to CH3OH

In this work, via engineering the conformation of cobalt active center in cobalt phthalocyanine molecular catalyst, the catalytic efficiency of electrochemical carbon monoxide reduction to methanol can be dramatically tuned. Based on a collection of experimental investigations and density functional theory calculations, it reveals that the electron rearrangement of the Co 3d orbitals of cobalt phthalocyanine from the low-spin state (S = 1/2) to the high-spin state (S = 3/2), induced by molecular conformation change, is responsible for the greatly enhanced CO reduction reaction performance. Operando attenuated total reflectance surface-enhanced infrared absorption spectroscopy measurements disclose accelerated hydrogenation of CORR intermediates, and kinetic isotope effect validates expedited proton-feeding rate over cobalt phthalocyanine with high-spin state. Further natural population analysis and density functional theory calculations demonstrate that the high spin Co2+ can enhance the electron backdonation via the dxz/dyz−2π* bond and weaken the C-O bonding in *CO, promoting hydrogenation of CORR intermediates.

Pb-Modified Ultrathin RuCu Nanoflowers for Active, Stable, and CO-resistant Alkaline Electrocatalytic Hydrogen Oxidation.

blem for hydrogen oxidation reaction (HOR), the anodic reaction of hydroxide exchange membrane fuel cell (HEMFC) for converting H2 to electric energy in sustainable manner. We demonstrate here an ultrathin Ru-based nanoflower modified with Pb (PbRuCu NF) as an active, stable, and CO-resistant catalyst for alkaline HOR. Mechanism studies show that the presence of Pb can weaken the adsorption of *H, strengthen *OH adsorption to facilitate CO oxidation, as a result of significantly enhanced HOR activity and improved CO tolerance. Furthermore, in-situ electrochemical attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) suggest that Pb acted as oxygen-rich site to regulate the behavior of the linear CO adsorption. The optimized Pb1.04-Ru92Cu8/C displays a mass activity and specific activity of 1.10 A mgRu-1 and 5.55 mA cm-2, which are ~10 and ~31 times higher than those of commercial Pt/C. This work provides a facile strategy for the design of Ru-based catalyst with high activity and strong CO-resistance for alkaline HOR, which may promote the fundamental researches on the rational design of functional catalysts.

Boosting protonation kinetics for ammonia electrosynthesis on Ru sites embedded in nanoporous ReSe2

Electrocatalytic N2 reduction reaction (NRR) is a promising approach for renewable NH3 production but is constrained by poor activity and selectivity, owing to the sluggish hydrogenation kinetics. Herein, we prepare a nanoporous Ru-doped ReSe2 (NP Ru-ReSe2) with controllable selenium vacancies by regulating the amount of Ru dopants. The catalyst exhibits excellent the NRR performance, which affords a high Faradaic efficiency of 22.7% and NH3 yield rate of 19.41 μg h−1 mg−1 at –0.4 V versus a reversible hydrogen electrode(RHE). In situ attenuated total reflectance–surface-enhanced infrared absorption spectroscopy studies combined with theoretical calculations unravel that a clear synergistic effect of Ru dopants and selenium vacancies onregulating the proton (H*) coverage on the ReSe2 surface to accelerate the proton-coupled processes as NN → NNH. while N2 dissociation becomes exothermic over the Ru active sites via Ru-to-N2 π back-donation, lowering energy barriers of the rate-determining step, ultimately enhancing the overall NRR catalytic performance.

In situ surface-enhanced infrared absorption analysis of the excited carrier transfer from n-type Si photoelectrode to Pt oxygen evolution cocatalyst by probing adsorbed CO molecules

BackgroundThe development of efficient photoelectrode material for water-splitting reactions has received considerable attention as it produces hydrogen gas from water using solar energy. Photoexcited holes migrate to the surface of an n-type photoelectrode oxidizing water to oxygen, and excited electrons migrate to the counter electrode reducing protons to hydrogen. However, there is limited knowledge of excited carrier transfer. MethodsTherefore, in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) has been used to investigate the excited hole migration from n-type Si photoelectrode to Pt oxygen evolution cocatalysts by monitoring the frequency of CO adsorbed on the Pt cocatalysts. Significant findingsAt the positive potential of Si photoelectrode under UV irradiation, the SEIRA spectrum of the CO adsorbed on the Pt cocatalyst shifted to higher wavenumbers owing to the excited hole transfer from n-type Si photoelectrode to the Pt cocatalyst attributed to band bending at the interface between the Si photoelectrode and Pt cocatalysts. It was successfully demonstrated that the regulation of photoexcited carriers was crucial for enhancing the photoelectrochemical activity of water splitting.

Role of Electrolyte-Adsorbates Interaction in Determining CO2 Reduction Reaction Pathways

Electrochemical CO2 reduction reaction (CO2RR) is a promising strategy to convert atmospheric CO2 into valuable fuels and chemicals. Although the optimization of the catalyst-adsorbates interaction via tuning the binding energies of electrocatalysts has been extensively studied, activity and product selectivity remain a challenge. Recently, there has been a growing recognition that cations in electrolytes influence the activity of surface electrocatalytic reactions.1 A recent density functional theory study suggested that partially desolvated metal cations stabilize CO2RR intermediates via electrostatic interactions.2 Therefore, an experimental understanding of how the cations (and surrounding water molecules) control the intermediates present on the surface and govern the reaction pathway is critical to establish further insights into the design of electrolytes for CO2RR.In this talk, the role of alkali metal cations and water molecules on the CO2RR is revealed by tracking the surface-bound intermediates using operando attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS). We will also integrate the operando surface analysis with final product selectivity, further strengthening the understanding of the reaction mechanism. It will also be demonstrated that the holistic information about the electrolyte-adsorbates interaction can provide additional knobs to tune the energetics of key reaction intermediates, leading to further improvements in electrocatalytic activity for the CO2RR.[Reference]1 Ringe, S. et al., Energy Environ. Sci. 2019, 12, 3001–3014.2 Monteiro, MCO. et al., Nat. Catal. 2021, 4, 654–662.