Reference Method Research Articles

CT-guided spatial normalization of nuclear hybrid imaging adapted to enlarged ventricles: Impact on striatal uptake quantification

IntroductionSpatial normalization is a prerequisite step for the quantitative analysis of SPECT or PET brain images using volume-of-interest (VOI) template or voxel-based analysis. MRI-guided spatial normalization is the gold standard, but the wide use of PET/CT or SPECT/CT in routine clinical practice makes CT-guided spatial normalization a necessary alternative. Ventricular enlargement is observed with aging, and it hampers the spatial normalization of the lateral ventricles and striatal regions, limiting their analysis. The aim of the present study was to propose a robust spatial normalization method based on CT scans that takes into account features of the aging brain to reduce bias in the CT-guided striatal analysis of SPECT images. MethodsWe propose an enhanced CT-guided spatial normalization pipeline based on SPM12. Performance of the proposed pipeline was assessed on visually normal [123I]-FP-CIT SPECT/CT images. SPM12 default CT-guided spatial normalization was used as reference method. The metrics assessed were the overlap between the spatially normalized lateral ventricles and caudate/putamen VOIs, and the computation of caudate and putamen specific binding ratios (SBR). ResultsIn total 231 subjects (mean age ± SD = 61.9 ± 15.5 years) were included in the statistical analysis. The mean overlap between the spatially normalized lateral ventricles of subjects and the caudate VOI and the mean SBR of caudate were respectively 38.40 % (± SD = 19.48 %) of the VOI and 1.77 (± 0.79) when performing SPM12 default spatial normalization. The mean overlap decreased to 9.13 % (± SD = 1.41 %, P < 0.001) of the VOI and the SBR of caudate increased to 2.38 (± 0.51, P < 0.0001) when performing the proposed pipeline. Spatially normalized lateral ventricles did not overlap with putamen VOI using either method. The mean putamen SBR value derived from the proposed spatial normalization (2.75 ± 0.54) was not significantly different from that derived from the default SPM12 spatial normalization (2.83 ± 0.52, P > 0.05). ConclusionThe automatic CT-guided spatial normalization used herein led to a less biased spatial normalization of SPECT images, hence an improved semi-quantitative analysis. The proposed pipeline could be implemented in clinical routine to perform a more robust SBR computation using hybrid imaging.

VALIDATION OF THE SMARTPHONE BLOOD PRESSURE MEASUREMENT SOLUTION OPTIBP™ TO TRACK BLOOD PRESSURE CHANGES IN PREGNANT WOMEN

Objective: Hypertensive disorders present significant morbidity and mortality during pregnancy. While ambulatory blood pressure measurement remains the standard of care for normotensive women, self-monitoring at home is increasingly prevalent. The widespread use of smartphones worldwide has sparked interest in mobile applications that leverage the built-in hardware for blood pressure estimation, yet few trials have assessed their accuracy. Design and method: This prospective, longitudinal and monocentric study evaluated the accuracy of the OptiBP algorithm against standard oscillometric blood pressure measurements in a sample of pregnant women. Patients scheduled for elective caesarean sections were enrolled during the preoperative anesthesia consultations. Paired blood pressure measurements using OptiBP and the reference method were obtained at multiple time-points in late pregnancy and the post-partum period. Agreement between methods was assessed using the AAMI/ESH/ISO 81060-2:2018 standard thresholds of 5±8 mmHg for mean ± standard deviation of the error (criterion 1) and patient-specific standard deviation of the mean error (criterion 2) and represented graphically by Bland-Altman scatterplots. Results: Twenty-four women were enrolled of which 15 completed the protocol, yielding 166 total valid measurement pairs. Mean and standard deviation of the error were -0.74 ± 8.38 and 0.99±6.88, and the patient-specific standard deviation of the mean error was 5.84 and 3.36, for SBP and DBP respectively. Conclusions: Compared with blood pressure measure with an oscillometric device, OptiBP's blood pressure estimates meet the AAMI/ESH/ISO 81060-2:2018 criteria for DBP.

Development of an orbital shaker-assisted fatty acid-based switchable solvent microextraction procedure for rapid and green extraction of amoxicillin from complex matrices: Central composite design

In this study, a cheap, fast and simple orbital shaker-assisted fatty acid-based switchable solvent microextraction (OS-FASS-ME) procedure was developed for the extraction of amoxicillin (AMOX) in dairy products, pharmaceutical samples and wastewater prior to its spectrophotometric analysis. Fatty acid-based switchable solvents were investigated for extracting AMOX. The key factors of the OS-FASS-ME procedure were optimized using a central composite design. The linearity of OS-FASS-ME procedure was in the range 5–600 ng mL−1 with a correlation coefficient of 0.991. In five replicate experiments for 20 ng mL−1 of AMOX solution, the recovery and relative standard deviation were 95.8% and 2.2%, respectively. Limits of detection and quantification were found 1.5 ng mL−1 and 5 ng mL−1, respectively. The accuracy, precision, robustness and selectivity of the OS-FASS-ME procedure were investigated in detail under optimum conditions. The OS-FASS-ME procedure was applied to milk, cheese, wastewater, syrups and tablets. A comparison of the results obtained from the reference method and the OS-FASS-ME method showed that the OS-FASS-ME procedure can be successfully applied to complex matrices.

A Bifunctional Electrocatalyst of Flower-Like Cr-Doped CoP/Fe2P Microsphere for Efficient Overall Water Splitting

Developing efficient, low-price non-noble metal-based electrocatalysts for overall water splitting in alkaline medium remains a formidable challenge. In our work, Cr-doped CoP/Fe2P (Cr-CoP/Fe2P) flower-like microsphere was synthesized through a simple hydrothermal and phosphating process. The resulting Cr-CoP/Fe2P electrocatalyst shows significantly enhanced oxygen evolution reaction performance (262 mV @ 10 mA cm−2) and has a satisfactory hydrogen evolution reaction performance (114 mV @ 10 mA cm−2), coupled with favorable stability in an alkaline medium. Furthermore, when assembling Cr-CoP/Fe2P into an electrolytic cell, the two-electrode system can provide a current density of 10 mA cm−2 at a voltage of 1.61 V. At high current density, the performance of the electrolytic cell composed of Cr-CoP/Fe2P is superior to that of noble metal catalyst electrode pair. Electronic structure analysis and various characterizations confirm that Cr doping and the formation of CoP/Fe2P heterogeneous interfaces redistribute the electron densities of the active sites, enlarge the specific surface area, and enhance the aerophobicity of the catalysts, thereby improving the electrocatalytic property. This work provides a referable method for engineering highly efficient and stable non-noble polymetallic phosphides, which serve as bifunctional electrocatalyst for overall water splitting.

THE RELIABILITY AND VALIDITY OF THE BALANCE MAT

BACKGROUND Reliable and accurate postural sway assessment tools are important for monitoring the postural stability of individuals so that interventions can be evaluated, and balance ability is better assessed. The Balance Mat (PSI, ACT, Australia) is a new postural sway assessment device that is relatively cheap and highly portable, but it is yet to be scientifically validated and its reliability tested. Therefore, the aims of this project were to assess the test-retest reliability and validity of the Balance Mat (BM). METHODS Seventeen participants (age range 18 – 67) were recruited, and they performed nine balance tests. The reference method for obtaining balance measurements was the AMTI AccuSway-Optimized force platform (Advanced Mechanical Technology, Inc., MA, USA), which was placed below the BM so that force plate and BM data were collected simultaneously. Each participant performed two trials for each test, which were 20 seconds in duration each. From the BM software, the sway variance, mean sway distance, sway range, sway velocity, and sway path were obtained for each trial. From the force platform, the following centre of pressure (COP) measurements were obtained: standard deviation of the radial displacement of the COP; mean radial displacement of the COP; 95% confidence ellipse area; average velocity of the COP; and COP path length. Spearman’s rank-order correlation coefficient was used to test the validity and reliability of the BM. RESULTS For the comparison between BM and force plate data, correlation coefficients ranged from 0.63 to 0.79 (p&amp;lt;0.001). For the test-retest reliability analyses, correlation coefficients ranged from 0.77 to 0.85 (p&amp;lt;0.001) among the nine tests. CONCLUSIONS The strong to very strong positive correlations suggest that the BM is a valid and reliable tool for assessing postural sway.

Research on speculation method for compressor map of PG9351FA gas turbine

A compressor map is usually represented by a limited number of feature points to speculate the entire operating range. Also, accurate compressor map models can be obtained quickly by using the appropriate methods. In this paper, 9351FA gas turbine is used as the research object, and a set of targeted compressor map speculation scheme is proposed. At 15 data points, high-precision compressor maps are obtained based on BP neural network, and this method is suitable for a large number of data points. At 6 data points, compressor maps are obtained based on the parameter estimation method, and this method is suitable for a small number of data points. The mean square deviation of the compressor map obtained by the neural network is about 0.002, while the minimum mean square deviation of the results of the parameter estimation method is 0.026 and the maximum mean square deviation is 0.088. Since the corrected speed line of 106.4 is almost vertical, the maximum error mean squared deviation and the maximum standard deviation occur on this line. Both methods are suitable for different sample sizes, and the speculated compressor maps are more reliable. The combination of the two methods can provide a set of reference methods for compressor map speculation.

Digital Food Frequency Questionnaire Assessing Adherence to the Norwegian Food-Based Dietary Guidelines and Other National Lifestyle Recommendations: Instrument Validation Study.

Valid assessment tools are needed when investigating adherence to national dietary and lifestyle guidelines. The relative validity of the new digital food frequency questionnaire, the DIGIKOST-FFQ, against 7-day weighed food records and activity sensors was investigated. In total, 77 participants were included in the validation study and completed the DIGIKOST-FFQ and the weighed food record, and of these, 56 (73%) also used the activity sensors. The DIGIKOST-FFQ estimates the intake of foods according to the Norwegian food-based dietary guidelines (FBDGs) in addition to lifestyle factors. At the group level, the DIGIKOST-FFQ showed good validity in estimating intakes according to the Norwegian FBDG. The median differences were small and well below portion sizes for all foods except "water" (median difference 230 g/day). The DIGIKOST-FFQ was able to rank individual intakes for all foods (r=0.2-0.7). However, ranking estimates of vegetable intakes should be interpreted with caution. Between 69% and 88% of the participants were classified into the same or adjacent quartile for foods and between 71% and 82% for different activity intensities. The Bland-Altman plots showed acceptable agreements between DIGIKOST-FFQ and the reference methods. The absolute amount of time in "moderate to vigorous intensity" was underestimated with the DIGIKOST-FFQ. However, estimated time in "moderate to vigorous intensity," "vigorous intensity," and "sedentary time" showed acceptable correlations and good agreement between the methods. The DIGIKOST-FFQ was able to identify adherence to the Norwegian FBDG and physical activity recommendations. The DIGIKOST-FFQ gave valid estimates of dietary intakes and was able to identify individuals with different degrees of adherence to the Norwegian FBDG and physical activity recommendations. Moderate physical activity was underreported, water was overreported, and vegetables showed poor correlation, which are important to consider when interpreting the data. Good agreement was observed between the methods in estimating dietary intakes and time in "moderate to vigorous physical activity," "sedentary time," and "sleep."

Exploring High School English Teaching Strategies for Continuation Writing based on Discourse Cohesion Theory

As a new type of question under the background of the new college entrance examination, continuation writing requires the writer to continue the article based on the context provided in the previous text, supplemented by the situational context of the article, and ensuring the logical coherence of the content. Discourse cohesion theory focuses on the coherence of grammar and vocabulary in discourse organization, aiming to construct a complete and coherent discourse text. The cohesive means under this theory can help writers to produce a well-structured, logically clear, and coherent article to a certain extent. Starting from the concept and existing problems of continuation writing, this article analyzes and explores the points of convergence between discourse cohesion theory and continuation writing, and proposes several teaching strategies to better guide writing teaching and improve students' writing ability. From the perspective of discourse cohesion theory, teachers can guide students to select appropriate referencing methods, plan the overall layout, pay attention to smooth connections, maintain logical clarity, and skillfully use substitution and ellipsis to refine language, making the writing process more efficient.

Comparison of real-time PCR and nested PCR based on the HlyA gene for the detection of Listeria monocytogenes. Application on cheese samples.

The aim of the present study was to compare the performance of a nested polymerase chain reaction (nPCR) and a real-time PCR based on the amplification of the HlyA gene from Listeria monocytogenes using a plasmid DNA standard. Nested PCR was developed with an internal amplification control (IAC). Both techniques were validated in soft cheese samples by comparing their results with the results of the microbiological reference method ISO 11290-1:2017. Cheese samples artificially contaminated with 3.5 to 3,500 UFC/25g were processed by ISO 11290-1:2017 and, at several times of culture, DNA samples were extracted. All cheeses contaminated with L. monocytogenes were positive for the microbiological method 96h post contamination and for nPCR and real-time PCR 48h post contamination. At this time, the HlyA gene was amplified in all contaminated samples. Both molecular techniques showed the same sensitivity, 30 copies/reaction or 3.5 UFC/25g, when plasmid DNA standard or artificially contaminated cheese samples were used. Finally, eighty soft cheese samples obtained from local retail stores and tested by three methods were negative, indicating a 100% concordance in results. The development of an nPCR with IAC reinforces the reliability of the negative results without increasing the costs of the reaction. Besides, nPCR showed less sensitivity to the presence of inhibitory substances in the reaction. The use of one of these molecular techniques could be easily coupled to the microbiological method, serving as a screening method in the food industry for hygiene monitoring and early identification of contaminated foods.

Robust residual-guided iterative reconstruction for sparse-view CT in small animal imaging

Objective. We introduce a robust image reconstruction algorithm named residual-guided Golub–Kahan iterative reconstruction technique (RGIRT) designed for sparse-view computed tomography (CT), which aims at high-fidelity image reconstruction from a limited number of projection views. Approach. RGIRT utilizes an inner-outer dual iteration framework, with a flexible least square QR (FLSQR) algorithm implemented in the inner iteration and a restarted iterative scheme applied in the outer iteration. The inner FLSQR employs a flexible Golub–Kahan bidiagonalization method to reduce the size of the inverse problem, and a weighted generalized cross-validation method to adaptively estimate the regularization hyper-parameter. The inner iteration efficiently yields the intermediate reconstruction result, while the outer iteration minimizes the residual and refines the solution by using the result obtained from the inner iteration. Main results. The reconstruction performance of RGIRT is evaluated and compared to other reference methods (FBPConvNet, SART-TV, and FLSQR) using projection data from both numerical phantoms and real experimental Micro-CT data. The experimental findings, from testing various numbers of projection views and different noise levels, underscore the robustness of RGIRT. Meanwhile, theoretical analysis confirms the convergence of residual for our approach. Significance. We propose a robust iterative reconstruction algorithm for x-ray CT scans with sparse views, thereby shortening scanning time and mitigating excessive ionizing radiation exposure to small animals.

Procjena utjecaja matriksa na kvantifikaciju lipofilnih toksina u plodovima mora

Phycotoxin accumulation in seafood can cause human intoxication and significant economic losses in seafood-producing areas. To protect consumer safety, maximum permitted levels in bivalve molluscs have been set, with appropriate analytical methods for their determination and quantification. The reference method for lipophilic phycotoxins, commonly referred to as lipophilic toxins, is liquid chromatography tandem mass spectrometry (LCMS/MS method), where coeluting components from the matrix can affect the efficiency of ionisation, resulting in erroneous quantification. In this study, the matrix effect was evaluated using the slope ratio analysis method, which involves comparing the slopes of the calibration curves in the matrix with those in pure solvent. The extent of the matrix effect was investigated in mussels, oysters, queen scallops and ascidians. The study covered all phycotoxins under Regulation EU 853/2004 for which certified standards are commercially available, including unregulated pectenotoxin 2. The results indicated that all lipophilic toxins were susceptible to this effect when LC-MS/MS was used for their determination. Significant ion suppression was evident for most analytes in all matrices, except for okadaic acid and dinophysistoxin 2 in bivalves, where significant ion enhancement was demonstrated, and dinophysistoxin 1 in oyster and scallop extract where no significant effect on ionisation was observed. Further analysis revealed no significant differences between the slope of mussel matrix-matched calibration and that of other bivalve matrices. Given this minor difference, the mussel matrix-matched calibration curve could be applied to minimise the matrix effect and to quantify phycotoxins in bivalve matrices analysed here, with the exception of the okadaic acid group in ascidians, which requires matrix-matched calibration prepared with the blank extract of these mentioned species. Given the risks phycotoxins pose to human health, ongoing analytical method development is necessary in this field to properly control food safety and ensure consumer health.

Salmonella carriage and change in serovar distribution in broiler giblets at slaughterhouse level in Turkiye: first report using ISO 6579-1:2017 and ISO 6579-3:2014

This study aimed to determine the prevalence and serovar distribution of salmonellae in liver, heart, and spleen (LHS) and gizzard (G) of slaughtered broilers. For this, a total of 60 sample units, comprised of 30 LHS and 30 G collected from 3 slaughterhouses, were analysed by reference methods for detection and serotyping as revised ISO 6579-1:2017 and ISO 6579-3:2014, respectively. Also, Salmonella-specific real-time PCR (Salm-PCR) was used for species confirmation, while Salmonella Enteritidis (S. Enteritidis) and Salmonella Typhimurium (S. Typhimurium) specific real-time PCR (SE/ST-PCR) was evaluated to determine its efficiency for rapid detection of the serovars mandated in current legal regulations compared to standard serotyping. All LHS (100%-30/30) and 90% (27/30) of G samples harbored Salmonella with an overall prevalence of 95% (57/60) in samples examined, where all isolates were confirmed as Salmonella by Salm-PCR. The most prevalent serovar in broiler giblets was S. Virchow (80.70%-46/57) followed by S. Enteritidis (19.30%-11/57). SE/ST-PCR (%17.54-10/57) could not detect one G isolate, which was serotyped as S. Enteritidis by standard serotyping. High relative accuracy (98.25%), sensitivity (100%) and specificity (100%), and agreement between methods (κ: 0.94) verified SE/ST-PCR's potential to be used as an alternative in rapid detection of S. Enteritidis and S. Typhimurium. Data on high Salmonella prevalence in broiler giblets of slaughterhouse origin, and detection of the pathogen by the implementation of all requirements indicated in the revised ISO 6579-1:2017 standard method, enabling the determination of actual prevalence in the samples with high sensitivity and specificity is of significance for public health. Additionally, identification of S. Virchow as the dominant serovar followed by S. Enteritidis with a relatively lower prevalence, and absence of S. Typhimurium in broiler giblets are important findings for Turkiye. This up to date data, obtained by strict application of ISO 6579-3:2014 procedures, indicated a shift in circulating serovars in the broiler industry. The objective findings in this study would bring awareness to national/international literature, and may be of use in future improvements in legal regulations.

Thermal rate constants and kinetic isotope effects of the H + H2O2 reactions: barrier height and reaction energy from single- and multireference methods.

One of the more significant sub-mechanisms of H2/O2 combustion involves the reaction of hydrogen peroxide with hydrogen atoms (H + H2O2), resulting in the production of OH + H2O (R1) and H2 + HO2 (R2) paths. Previous experimental and ab initio calculations reveal some variations in the barrier height for (R1). To improve the energetics of both (R1) and (R2), single reference and multireference ab initio methods are employed, and the rate constants and H/D kinetic isotope effects (KIEs) are calculated as a function of temperature. For (R1), the best results for the barrier height and reaction energies computed with the CASPT2(15,11)/aug-cc-pV6Z are 5.2 and - 70.3kcal.mol-1, respectively. CCSD(T)/aug-cc-pV5Z + CV (core-valence) calculations for (R2) give 9.7 and - 15.6kcal.mol-1 to those parameters. The CVT/SCT rate constants of both paths agree well with the fitted rate constants from uncertainty-weighted statistical analysis of the 14-mechanism of H2/O2. The kinetic isotopic effect (kH/kD) for the reaction D + H2O2 → DH + HO2 was found to be 0.47, which is in excellent agreement with the experimental value of 0.43. The structures of reactants, transition state, and products of (R1) and (R2) are calculated with the aug-cc-pVTZ basis set and M062X DFT, CCSD(T), and CASSCF methods. The barrier heights and reaction energies of (R1) and (R2) are computed using the M06-2X, CCSD(T), MRCI, and CASPT2 methods and various basis sets. The rate constants are calculated with the variational transition state theory including multidimensional tunneling corrections (VTST-MT), with potential energy surfaces built by the M06-2X/aug-cc-pVTZ approach.

Performance of a Norfentanyl Immunoassay in Specimens with Low Concentrations of Fentanyl and/or Norfentanyl.

Many fentanyl immunoassays are limited in their ability to detect norfentanyl. Urine specimens collected from individuals who have been exposed to fentanyl frequently have detectable concentrations of norfentanyl (≥2 ng/mL) but low concentrations of fentanyl (<2 ng/mL) by LC-MS/MS. The Lin-Zhi Fentanyl II Immunoassay (Lin-Zhi) claims 100% cross-reactivity with norfentanyl and therefore may detect exposure missed by other assays. In addition to verifying the manufacturer's analytical sensitivity claims, we selected 92 urine specimens with low-positive Lin-Zhi results (1-99 absorbance units, lowest 10%) for analysis by the Immunalysis Health Equity Impact Assessment and ARK II fentanyl methods. The accuracy of the 3 immunoassays was compared to LC-MS/MS as the reference method. Spiking studies using purified fentanyl and norfentanyl and a set of 100 consecutive specimens confirmed the manufacturer's claims of limit of detection for fentanyl (3.8 ng/mL) and norfentanyl (5.0 ng/mL). However, the 92 low-positive patient specimens demonstrated concentrations of norfentanyl and fentanyl below 2.0 ng/mL by LC-MS/MS, with 47 (51%) having only norfentanyl detected. When comparing Lin-Zhi to the Immunalysis and ARK II immunoassays, only 27 (29%) of the 92 specimens were concordant. Fifty-two (57%) of the specimens were positive by LC-MS/MS and Lin-Zhi but false negative by one or both other immunoassays. Seven specimens (8%) were positive by Lin-Zhi but negative by the other immunoassays and had undetectable concentrations (<2 ng/mL) of fentanyl and norfentanyl by LC-MS/MS. The clinical sensitivity of the Lin-Zhi exceeds the manufacturer's claims, providing results comparable to LC-MS/MS methods.

CoaguChek and Coag-Sense PT2 Meter Point of Care INR Device Validation

ObjectiveTo standardize international normalized ratio (INR) measurements and improve data integrity by enabling electronic result transmission for warfarin monitoring, two point-of-care (POC) devices were evaluated against an internal plasma INR reference method. MethodsA multicenter study was pursued (January 24, 2022, through October 19, 2022) to compare concordance of two commercially available POC devices, Coag-Sense PT2 Meter (Coag-Sense) and CoaguChek XS Pro and Plus devices (CoaguChek), against an internal plasma INR method among patients treated with warfarin. Bias and linear regression analysis were assessed for these devices including dosing decision accuracy compared with plasma INR reference. ResultsTwo hundred ninety-nine patients treated with warfarin across three Mayo Clinic sites agreed to participate. Atrial fibrillation (n=191, 63.9%), venous thromboembolism (n=65; 21.7%), and heart valve prosthesis (n=46; 15.4%) were common anticoagulant indications with a 2.5 INR target for 280 (93.6%) of patients. For the CoaguChek devices, 243 (81.3%) of values fell within 0.2 INR units with plasma INR referent and 285 (95.3%) within 0.4 units (R2=0.93). For the Coag-Sense device, 102 (34.1%) of values fell within 0.2 INR units and 180 (60.2%) within 0.4 INR units of plasma INR values, (R2=0.83; P<.0001). Using the plasma INR as the gold standard, appropriate dosing recommendations would have occurred for 292 (97.7%) of the CoaguChek and 244 (81.6%) of the Coag-Sense results. ConclusionCompared with a plasma referent, INR values obtained from the CoaguChek devices exhibited less systematic bias compared with Coag-Sense measures. This translates to a greater percentage of concordant management decisions between POC and laboratory INR methods.

Ultrasound-based strategies for the recovery of microalgal carotenoids: Insights from green extraction methods to UV/MS-based identification

Carotenoids, versatile natural pigments with numerous health benefits, face environmental concerns associated with conventional petrochemical-based extraction methods and limitations of their synthetic equivalents. In this context, this study aims to introduce eco-friendly approaches using ultrasound-based strategies (probe and bath) for the extraction of carotenoids from microalgae, initially focusing on Microchloropsis gaditana and subsequently evaluating the versatility of the method by applying it to other microalgae species of interest (Tisochrysis lutea, Porphyridium cruentum, and Phaeodactylum tricornutum) and defatted microalgal residues. Among the approaches evaluated, the 5-min ultrasonic probe system with ethanol showed comparable carotenoid recovery efficiency to the reference method (agitation, 24 h, acetone) (9.4 ± 2.5 and 9.6 ± 3.2 mg g−1 carotenoids per dry biomass, for the green and the reference method, respectively). Moreover, the method's sustainability was demonstrated using the AGREEprep™ software (scored 0.62 out of 1), compared to the traditional method (0.22 out of 1). The developed method yielded high carotenoid contents across species with diverse cell wall compositions (3.1 ± 0.2, 2.1 ± 0.3, and 4.1 ± 0.1 mg g−1 carotenoid per dry biomass for T. lutea, P. cruentum, and P. tricornutum, respectively). Moreover, the application of the method to defatted biomass showed potential for microalgal valorization with carotenoid recovery rates of 41 %, 60 %, 61 %, and 100 % for M.gaditana, P. tricornutum, T. lutea, and P. cruentum, compared to the original biomass, respectively. Furthermore, by using high-performance liquid chromatography with a diode array detector (HPLC-DAD) and high-resolution mass spectrometry (HRMS), we reported the carotenoid and chlorophyll profiles of the different microalgae and evaluated the impact of the eco-friendly methods. The carotenoid and chlorophyll profiles varied depending on the species, biomass, and method used. In summary, this study advances a green extraction method with improved environmental sustainability and shorter extraction time, underscoring the potential of this approach as a valuable alternative for the extraction of microalgal pigments.

New liquid chromatography tandem mass spectrometry reference data for estradiol show mini-puberty in both sexes and typical pre-pubertal and pubertal patterns.

Reliable estradiol (E2) reference intervals (RIs) are crucial in pediatric endocrinology. This study aims to develop a sensitive ultra-performance liquid chromatographic tandem mass spectrometry (UPLC-MS/MS) method for E2 in serum, to establish graphically represented RI percentiles and annual RIs for both sexes, and to perform a systematic literature comparison. First, a UPLC-MS/MS method for E2 was developed. Second, graphically represented RI percentiles and annual RIs covering 0-18 years were computed (cohort of healthy children [1181 girls and 543 boys]). Subsequently, RIs were compared with published data by systematic searches. Lower limit of quantification was 11 pmol/L, indicating high sensitivity. Estradiol first peaked during mini-puberty in both sexes (girls up to 192 pmol/L; boys up to 225 pmol/L). As could be expected, girls showed higher pubertal E2 (up to 638 pmol/L). However, boys' RIs (up to 259 pmol/L) overlapped considerably. We found 4 studies in the literature that also used LC-MS/MS to determine E2 and published RIs for the complete pediatric age range. Reference intervals varied considerably. Pre-pubertal and pubertal phases were present in all studies. Higher E2 during the time of mini-puberty in both sexes was documented in 3 studies including ours. Variability of RIs for E2 between studies illustrates the importance of laboratory-specific RIs despite using a LC-MS/MS reference method. In boys, the striking E2 peak during mini-puberty as well as high pubertal E2 without phenotypic estrogenization in regular male puberty indicates that the role of E2 in children and, especially in boys, requires better functional understanding.

Minimax estimation of functional principal components from noisy discretized functional data

AbstractFunctional Principal Component Analysis is a reference method for dimension reduction of curve data. Its theoretical properties are now well understood in the simplified case where the sample curves are fully observed without noise. However, functional data are noisy and necessarily observed on a finite discretization grid. Common practice consists in smoothing the data and then to compute the functional estimates, but the impact of this denoising step on the procedure's statistical performance are rarely considered. Here we prove new convergence rates for functional principal component estimators. We introduce a double asymptotic framework: one corresponding to the sampling size and a second to the size of the grid. We prove that estimates based on projection onto histograms show optimal rates in a minimax sense. Theoretical results are illustrated on simulated data and the method is applied to the visualization of genomic data.

Acoustical Holography and Coherence-Based Noise Source Characterization of an Installed F404 Engine

Understanding the acoustic source characteristics of supersonic jets is vital to accurate noise field modeling and jet noise reduction strategies. This paper uses advanced, coherence-based partial field decomposition methods to characterize the acoustic sources in an installed, supersonic GE F404 engine. Partial field decomposition is accomplished using an equivalent source reconstruction via acoustical holography. Bandwidth is extended through the application of an array phase-unwrapping and interpolation scheme. The optimized-location virtual reference method is used. Apparent source distributions and source-related partial fields are shown as a function of frequency. Local maxima are observed in holography reconstructions at the nozzle lipline, distinct in frequency and space. The lowest-frequency local maximum may relate to noise generated by large-scale turbulence structures in the convectively subsonic region of the flow. Other local maxima are correlated primarily with Mach wave radiation originating from throughout the shear layer and into the fully mixed region downstream of the potential core tip. Source-elucidating decompositions show that the order and behavior of the decomposition lend to the local maxima being related to distinct subsources. Between the local maxima, however, there may be a combination of sources active, which is likely the cause of the spatiospectral lobes observed in other full-scale, supersonic jets.

The Performance Analysis of Grouting Repair Effect on the Accuracy of Disturbance Stress Test in Damaged Surrounding Rock Mass.

Disturbance stress assessment is crucial for ensuring the safety of deep engineering projects. Currently, the primary technique for continuously monitoring three-dimensional disturbance stress is the stress relief method, but its accuracy can be compromised by rock damage that occurs after excavation. To mitigate this issue, grouting is employed to repair damaged rock masses and enhance their mechanical properties. However, the impact of grouting techniques on improving the accuracy of disturbance stress testing is challenging to evaluate through laboratory and in situ experiments. To address this problem, numerical simulation technology is employed to investigate disturbance stress testing after the repair of damaged surrounding rock through grouting. The simulation results indicate that grouting repair significantly enhances the accuracy of stress testing. As the depth of damaged rock mass repair increases, the error in stress testing decreases. Achieving complete repair of the initial damage zone during grouting is essential to eliminate errors in stress testing. Expanding on the positive effects of grouting repair on stress testing, a segmented testing method for disturbance stress is proposed. The method involves separately testing the initial stress and stress changes, thereby reducing the stress level within the rock, minimizing rock failure, and enhancing the accuracy of disturbance stress testing. This study provides valuable reference methods, and the outcomes of this research will serve as a foundation for enhancing the accuracy of disturbance stress testing in deep hard rock engineering.