Reduction In Tensile Strength Research Articles

Hygrothermal effects on the durability of resin‐infused thermoplastic E‐glass fiber‐reinforced composites in marine environment

AbstractThis paper presents a comparative assessment of hygrothermal effects on the mechanical and thermomechanical properties of resin‐infused thermoplastic E‐glass fiber‐reinforced composites (FRC) in the marine environment. The thermoplastic FRCs were immersed in seawater at two different aging temperatures, that is, 35 and 70°C. The quasi‐static tests were conducted on unaged and aged FRCs, followed by scanning electron microscopy (SEM) to determine the effect of the marine environment on the mechanical properties and damage progression. The specimens immersed at 70°C showed a significant drop of 46.7%, 39.7%, 22.6%, and 16% in mechanical properties (tensile, compression, flexural, and ILSS) mainly due to plasticization, matrix cracking, and fiber/matrix debonding. The specimens immersed at 35°C showed a reduction in tensile, compressive, and flexural strength of 10%, 14.7% and 1.9% respectively, with no significant effect on ILSS. In addition, dynamic mechanical analysis (DMA) reveals that prolonged aging induces an increase in glass transition temperature due to polymerization reactions. This work is intended to reveal the effect of extreme marine environment on the resin‐infused thermoplastic FRC and to provide a useful reference for their potential structural applications in the marine industry.Highlights Influence of aging conditions on the long‐term performance of FRCs. Hygrothermal aging leads to an increase in the glass transition temperature. The marine environment degrades mechanical properties of FRCs by up to 50%. Matrix cracking and fiber‐matrix debonding evolved as dominant failure modes.

A Comparison of Additive Manufactured to Injection Molded Martian Regolith Based Polymer Matrix Composites

The completed study investigated the creation of Martian regolith simulant composite parts using injection molding and additive manufacturing. Traditional manufacturing techniques such as injection molding are not feasible on the Martian surface therefore in-situ processes must be developed using additive manufacturing processes to prepare habitats prior to having a human presence on the surface. The goal of this study was to investigate the impacts of additive manufacturing on the material property values between parts made using traditional injection molding and additive manufacturing. Martian regolith simulant composite pellets were created by combining a Martian regolith simulant at 40 wt.% loading with polypropylene via twin screw extrusion. This material was then used to create test specimens using injection molding and additive manufacturing. Samples underwent tensile, flexural, Izod impact, and immersion density tests according to ASTM International and standardized test instructions. Additive manufactured parts saw a nearly 40% reduction in tensile and flexural strength with more than double the tensile modulus when compared to injection molded parts. The flexural modulus for additive manufacturing was around 36% that of the injection molded part with a minor decrease in density of around 13%. The collected test results suggested that while there were differences in the material property values between the manufacturing processes, a more interesting foaming behavior of the extrudite was observed during the additive manufacturing process resulting in an extremely rough and pitted surface. This rough surface finish was a stark comparison to the smooth injection molded parts. This observed foaming behavior in the polymeric composite material during thermal processing prompted the theory that thermal releases from the Martian regolith simulant was the most likely cause of the observed differences. Pellet surface moisture tests, Martian regolith simulant thermogravimetric analyses, and literature reviews of thermal decomposition of the Martian regolith simulant constituents revealed that most likely olivine releases oxygen and hydrated silica releases water during the thermal processing of the Martian regolith simulant composite. During a closed mold process such as injection molding, these volatile gases are forced out of the part by the pressures of the molding process, but in an open to atmosphere process such as additive manufacturing these gases foam to the surface during cooling leaving the part with an inferior surface finish.

Surface modification of poly (ethylene terephthalate) using imidazolium-based ionic liquids

Ionic liquids (ILs), with their unique characteristics, are widely known as new alternatives for solvents and catalysts used in various chemical reactions. Due to their extensive range of applications and environmental compatibility, they are suitable options for treating fibrous substrates. In this regard, this paper focuses on investigating the possibility of poly (ethylene terephthalate) surface modification via imidazolium-based ILs. Surface modification was carried out under different process conditions by varying the temperature and the catalyst. The possibility of treating samples in the IL solution for the second time was also examined. Moreover, the effect of the modification on the dyeing of polyester with disperse dye without carrier at 100 °C was studied. The samples’ wettability properties were investigated through several test methods by measuring vertical wicking height, wetting time, drop contact angle, surface resistivity and absorption of methylene blue dye. The chemical and physical changes of the modified samples were also evaluated via scanning electron microscopy images, Fourier-transform infrared spectroscopy (FTIR) spectra and mechanical tests. Results demonstrate that treatment with [BMIM]Cl and [BMIM]Br induces morphological changes on the fibre surface, creating grooves and voids. FTIR analysis and Methylene blue staining test confirm the formation of hydroxyl and carboxyl groups, enhancing the fabric's hydrophilicity and dyeability. Wettability tests reveal that increased water absorption leads to reduced electrical resistivity. Mechanical tests indicate a slight reduction in tensile strength attributed to surface roughness.

Tailoring of Gelatin-Chitosan Nanofibers Functionalized with Eucalyptus Essential Oil via Electroblowing for Potential Food Packaging and Wound Dressing Applications

AbstractIn recent years, new approaches to fabricating nanofiber networks for potential applications in wound dressing and food packaging have been in the spotlight. This study aimed to produce functional webs based on gelatin, chitosan, and eucalyptus essential oil using the electro-blowing method instead of traditional spinning methods such as electrospinning. The resultant nanofiber webs exhibit promising morphological characteristics, including reduced fiber diameters, enhanced air permeability, and improved thermal stability. The integration of chitosan and eucalyptus essential oil overcomes limitations associated with gelatin, offering enhanced mechanical properties, antibacterial efficacy, and potential attributes for wound healing and food packaging. The combination of gelatin and chitosan contributes to biodegradability and biocompatibility, crucial for developing materials compatible with the natural environment. The addition of eucalyptus essential oil provides an additional layer of antimicrobial protection, aligning with sustainability goals in wound care and active food packaging. A comprehensive analysis encompassing SEM morphologies, fiber diameters, air permeability, FTIR spectra, TGA thermograms, and contact angle measurements establishes a thorough understanding of the fabricated nanofiber webs’ characteristics. Despite the favorable properties exhibited by the developed nanofiber webs for wound healing and food packaging applications, the incorporation of eucalyptus essential oil resulted in a reduction in tensile strength and elongation ratios. This observation highlights the necessity for further optimization and fine-tuning of the formulation to strike a balance between antimicrobial benefits and mechanical properties. Distinguished by its unique combination of gelatin, chitosan, and eucalyptus essential oil, this research contributes to the advancement of nanofiber technology, expanding knowledge in the field and paving the way for the development of advanced materials with enhanced therapeutic properties for wound healing and food packaging. Graphical Abstract

Accelerated aging tests of large-diameter GFRP bars in alkaline environment

Fiber reinforced polymer (FRP) bars have become increasingly popular, while the studies on durability of FRP bars are primarily on small-diameter FRP bars. This study investigated the tensile strength retention in glass FRP (GFRP) bars of different diameters (13 mm and 25 mm) after immersion in an alkaline solution (pH=12.6) at various temperatures (20 °C, 40 °C and 60 °C) for 1, 2, 3, and 6 months. The results reveal that the degradation of GFRP bars was slow at 20 °C, accelerated but not pronounced at 40 °C and considerable at 60 °C. Particularly, the 13 mm diameter GFRP bars exhibited a more significant reduction in tensile strength, with a decrease of 20.12 % after 6 months, while the 25 mm diameter bars only decreased by 13.23 %. Results reveal that, importantly, degradation of GFRP bars is primarily attributed to the diffusion of the moisture and alkalis, which disrupts the bond between the fibers and the matrix, causing interface damage. Finally, based on the Arrhenius theory, it is predicted that the tensile strength retention of 13 mm and 25 mm diameter GFRP bars will be 66.4 % and 79.8 %, respectively, after 50 years of exposure at an average annual temperature of 35 °C. The important finding that the small-diameter FRP bars are more vulnerable to the alkaline exposure than larger diameter bars suggests that the current studies on durability of FRP bars are conservative to be referred in practice.

Tensile strength prediction of crumb rubber concrete based on mesoscale modelling

ABSTRACT This study presents an experimental study and a mesoscale model for evaluating the tensile performance of crumb rubber concrete (CRC). In the experimental study, indirect tensile strengths of CRC with 6%, 12% 18% rubber contents were tested. Then the tested CRC samples were modelled as a five-phase material containing rubber, coarse aggregate, mortar, aggregate-mortar interface layer, and rubber-mortar interface layer. Numerical results from the mesoscale model agreed well with experimental tests. Parameter analysis was carried out to investigate the content, size, shape of rubber particle, thickness of interface layer on the tensile strength of CRC. Numerical results also indicated that rubber content was the governing influencing factor on the tensile strength reduction. As comparison, the influence from rubber size and rubber shape was relatively low. For a specimen with constant rubber content and size, changes in the distribution of rubber particles resulted in slight changes in the tensile strength of CRC as well. The effect of rubber particles on the tensile properties of concrete was similar to that of pores. Finally, tensile strength prediction formula was developed based on the pores model proposed in this study.

Degradation characteristics of 3D printed continuous fibre-reinforced PA6/chopped fibre composites in simulated saltwater

AbstractThis paper investigates the performance of continuous fibre-reinforced 3D printed components in salt water medium at room temperature. Markforged® Mark Two 3D printer was employed to fabricate standard specimens made of Onyx and reinforced Onyx specimens with continuous carbon, high-strength high-temperature glass, and Kevlar fibres. Aging process was conducted to characterize the long-term effect of salt water on the mechanical behaviour of fibre-reinforced 3D printed samples. Several mechanical tests including tensile, 3-point bending test and indentation testing have been carried out on the dry and aged standard samples to evaluate tensile strength, flexural strength, micro-hardness, and modulus of elasticity in micro-scale. The mechanical tests revealed the degradation and loss in mechanical properties of the printed samples after aging in salt water. The data highlighted that Onyx samples without continuous fibres experienced the most significant reduction in both tensile (33.54%) and flexural (63.47%) strengths after 1 year, while continuous carbon fibre-reinforced Onyx samples showed comparatively lower strength reductions (28.46% in tensile strength and 18.73% in flexural strength). Optical and scanning electron microscopy were performed to investigate the fracture behaviour of the tested specimens. In addition, the DSC assessment showed a slight change in the thermal properties of aged specimens.

Tensile and compressive properties of bamboo scrimber under different temperature conditions

AbstractBamboo scrimber demonstrates vulnerability to environmental temperature fluctuations, such as exposure to cold or fire, when deployed in structural applications. Consequently, its mechanical properties can substantially diverge from the intended design values under varying thermal conditions. This study aims to study the tensile and compressive properties of bamboo scrimber under different temperatures to provide data support for studying bamboo scrimber under low and high temperatures. The compressive properties of bamboo scrimber under temperatures ranging from −30°C to 250°C and the tensile properties under −20°C to 250°C were determined by a series of tests with a total of 125 specimens. The results show that the mass loss of bamboo scrimber increases gradually with the increase in temperature, and the increasing trend intensifies after 120°C. With the increase of temperature, the failure mode of the specimens under compression changes from the bottom compression cracking damage to the local destabilization of longitudinal fibers, while the tensile damage modes aren't influenced by temperature, and both “straight‐line” and “folded‐line” types of damage modes occur at different temperatures. The tensile and compressive strengths and elastic modulus of the specimens decreased with the increase in temperature, and the strength was more susceptible to the temperature than the elastic modulus: a rise in temperature from 20°C to 250°C resulted in a reduction of compressive strength and tensile strength by 80.80% and 84.11%, respectively, the compressive modulus and tensile modulus experienced decreases of 49.51% and 53.28%. Furthermore, equations of temperature influence coefficients of strength and elastic modulus were established based on the test results.Highlights Bamboo scrimber's mechanical properties under different temperatures are studied. Tendency and explanation of temperature influence coefficients are analyzed. Temperature coefficient equations for strength and elastic modulus are proposed.

Mechanical characteristics of structural concrete using building rubbles as recycled coarse aggregate

Abstract The aim of this research is to investigate whether construction rubbles may be utilized as coarse aggregates in concrete. Experimentally, the slump, unit weight, compressive, tensile, and flexural strength tests were applied on concrete samples with varying percentages of recycled coarse aggregate (RCA) and compared with reference concrete produced with natural coarse aggregate. This research conducted 96 concrete samples with RCA replacement percentages of 0, 35, 65, and 100%, respectively. The control mixture produced with natural aggregate showed better results than the mixtures containing recycled aggregate; thus, compressive, tensile, and flexural strengths reduced as the amount of the recycled aggregate increased. Using 100% RCA, the compressive, tensile, and flexural strength reduction reached up to 64, 29, and 38%, respectively.

An in vitro and in vivo study of electrospun polyvinyl alcohol/chitosan/sildenafil citrate mat on 3D-printed polycaprolactone membrane as a double layer wound dressing

Double-layer dermal substitutes (DS) generally provide more effective therapeutic outcomes than single-layer substitutes. The architectural design of DS incorporates an outer layer to protect against bacterial invasions and maintain wound hydration, thereby reducing the risk of infection and the frequency of dressing changes. Moreover, the outer layer is a mechanical support for the wound, preventing undue tension in the affected area. A 3D-printed polycaprolactone (PCL) membrane was utilized as the outer layer to fabricate DS wound dressing. Simultaneously, a polyvinyl alcohol/chitosan/sildenafil citrate (PVA/CS/SC) scaffold was electrospun onto the PCL membrane to facilitate cellular adhesion and proliferation. Scanning electron microscopy (SEM) analysis of the PCL filaments revealed a consistent cross-sectional surface and structure, with an average diameter of 562.72 ± 29.15 μm. SEM results also demonstrated uniform morphology and beadless structure for the PVA/CS/SC scaffold, with an average fiber diameter of 366.77 ± 1.81 nm for PVA/CS. The addition of SC led to an increase in fiber diameter while resulting in a reduction in tensile strength. However, drug release analysis indicated that the SC release from the sample can last up to 72 h. Animal experimentation confirmed that DS wound dressing positively accelerated wound closure and collagen deposition in the Wistar rat skin wound model.

Role of extracted nanosilica from rice husk on the structure, property and biodegradability of low density polyethylene/starch biodegradable film

Role of extracted nanosilica from rice husk on the structure, property and biodegradability of low density polyethylene/starch biodegradable film

Recycled mask polypropylene microfibers benefit tensile properties and prevent thermally induced spalling of high-strength engineered cementitious composite (HS-ECC)

The COVID-19 pandemic has led to a significant amount of waste medical masks being generated, which if not properly managed would pose a substantial risk to the natural environment. In this context, this study focuses on upcycling the waste medical mask propylene (PP) microfibers in high-strength engineered cementitious composites (HS-ECC) to mitigate its explosive spalling issue upon fire exposure. At ambient temperature, the compressive strength of Ref-ECC (without PP microfibers) reached 96.4 MPa, and the incorporation of recycled mask fibers (RMFs) up to 0.5 vol% had a negligible effect on it. The incorporation of low-cost RMFs benefited the uniaxial tensile properties of HS-ECC. For instance, at 25 °C, the incorporation of 0.5 vol% RMFs increased the tensile strain capacity and tensile strength of the HS-ECC to 2.60% and 7.9 MPa, from those of the Ref-ECC (2.03% and 7.1 MPa), respectively. The 0.5 vol% RMFs in the HS-ECC increased the tensile strain capacity to 3.80% at 60 °C, 4.50% at 90 °C and 5.23% at 120 °C notwithstanding their reduced tensile strength, respectively. The RMFs in the HS-ECC induced inner (sub)micron-sized cracks after thermal exposures, facilitating multi-cracking behavior. After 600 °C/2h heating, severe spalling occurred in the Ref-ECC cylinder specimens, demonstrating that polyethylene (PE) fibers alone (at 1.8 vol%) cannot prevent spalling upon fire exposure. However, the incorporation of RMFs (as little as 0.3 vol%) was proven as an effective preventive measure against the explosive spalling phenomenon in HS-ECC.

Fractional Lengthening of Forearm Flexor Tendons: A Cadaveric Biomechanical Analysis

Multiple procedures have been described for wrist and finger flexion contractures and spasticity. Fractional lengthening of forearm flexor tendons involves making parallel transverse tenotomies at the musculotendinous junction to elongate the muscle. Currently, there is limited literature to define the biomechanical consequences of this lengthening technique. Forty-eight flexor tendons were harvested from eight paired upper limbs including flexor carpi radialis, flexor carpi ulnaris, flexor pollicis longus, and flexor digitorum superficialis tendons. Each tendon that was lengthened was paired with the contralateral tendon as a control. A pair of transverse tenotomies were completed for the fractional lengthening. The first tenotomy was performed at the musculotendinous junction where the tendon narrowed to 75% of its maximal width. The second tenotomy was made 1 cm distal to the first. Tendon length was measured before and after fractional lengthening at a constant resting tension of 1 N. The maximum load at failure of each tendon and the mechanism of failure were each measured and compared with the contralateral side. After fractional lengthening, the mean increase in resting tendon length was 4 mm. When loaded to failure, the mean maximum load of fractionally lengthened tendons was 42% of the mean maximum load of intact tendons. All lengthened tendons failed at the distal tenotomy site. Fractional lengthening resulted in an increase of 3-6 mm (mean: 4 mm) in tendon length at resting tension. There was a significant loss in tensile strength and load to failure following fractional lengthening compared with an intact musculotendinous unit. The reduction in tensile strength following fractional lengthening results in loads at failure that are, in some cases, lower than the estimated forces required to perform basic tasks. Caution during the healing and rehabilitation period is warranted.

Enhancing Thermal Insulation of Poly(β-Hydroxybutyrate) Composites with Charring-Foaming Agent-Coated Date Palm Wood

Date palm fiber (DPF) holds great potential for composite materials, but its flammability limits its practical applications. In this study, DPF was modified using a pad-drying method to impregnate it with a 5 wt.% solution of ammonium dihydrogen phosphate (ADP). These treated fibers were then utilized to fabricate poly(β-hydroxybutyrate)- (PHB-) based composites. The resulting thermal insulators were comprehensively evaluated for their flammability, physical, mechanical, and thermophysical properties, as well as morphological and thermal stability characteristics. The findings revealed a significant reduction in flame spread and smoke suppression; however, the concentration used is not sufficient to achieve the desired rating grades. The thermal insulation capacity of the modified fiber composites was substantially enhanced, particularly with the 40% PHB/DPF-ADP composite displaying the lowest thermal conductivity at 0.0564 W/m.K. Moreover, the presence of gaps and voids at the interface led to a reduction in tensile strength to 4-7 MPa. Additionally, the modified fiber composites exhibited significantly reduced water absorption (~0.76%), attributed to the formation of a highly water-resistant substance containing a furan compound. This work provides a simple and effective approach for achieving durable flame retardancy and long-term thermal insulation performance, offering promising opportunities for the practical application of biobased PHB composites.

Investigation of TiO2 Nanoparticles Influence on Tensile Properties and Thermal Stability of Dry and Wet Luffa-Epoxy Nanocomposites.

Recently, progress has been made toward understanding the efficiency of polymer composites with natural fibres. With the hope of enhancing the characteristics of polymer composites supplemented with natural fibres in a watery environment, TiO2 nanoparticles have been used to improve their performance in the field. These nanoparticles were filled in luffa-epoxy components at 1, 3, and 5 % volume fractions. A combination of x-ray diffraction and Fourier transform infrared spectroscopy was utilized to conduct the structural examinations. The nanoparticle spread was captured by field emission scanning electron microscopy. Results show that dry nanocomposite's tensile strength and modulus have increased by 74% and, 13%, 137%, and 50% compared with epoxy and 40 vol% luffa-epoxy [E/L] composites, respectively. In wet nanocomposites, maximum reduction in tensile strength and modulus were observed as 27.4% and 16.54%, respectively. The diminished water absorption and thickness swelling percentage of nanocomposites were recorded as 98% and 91.8%, respectively. The onset temperature of these nanocomposites was scattered in the range of 379-393°C, with a maximum char residue of 38%. The increase in the percentage of residue indicates the effectiveness of epoxy's flame retardant, improved thermal stability, diminished water absorption [approximately 2%], and 95% retention of wet composites' tensile properties. These results provided data support for improving the application of nanocomposites in the automobile field.

A Modified Drucker–Prager Model Considering Tensile Strength Reduction and Its Applications in Slope Stability Analysis

A Modified Drucker–Prager Model Considering Tensile Strength Reduction and Its Applications in Slope Stability Analysis

Effect of high temperature annealing on microstructure and mechanical properties of Morlion735 alumina fiber

Continuous alumina fiber-reinforced alumina (Al2O3/Al2O3) composite is a very promising candidate for thermal structural materials in aerospace vehicles and other applications. Alumina fibers used in Al2O3/Al2O3 composites play a crucial role in enhancing their mechanical properties and thermostability. In this article, the effect of annealing on the tensile strength and microstructure of Morlion735 alumina fiber was investigated. The results showed that the phase transformation occurs at 1147 °C, resulting in a mullite phase with an orthogonal lattice structure. As the annealing temperature increases, the crystal domain size of the mullite gradually increases. Both the phase transformation and the increasing crystal domain size lead to more lattice defects, which significantly affect the tensile strength and tensile modulus of alumina fibers. A 0.67 GPa reduction in tensile strength (from 1.14 GPa to 0.47 GPa) was observed when the annealing temperature increased from 1200 °C to 1400 °C. Weibull statistical analysis revealed that as the annealing temperature increased, the tensile strength dispersion of Morlion735 fiber also increased. This can be attributed to the volume-dependent flaw distributions. These results provide an in-depth understanding of the tensile strength evolution mechanism under high temperatures.

Effect of wet-dry history on performances of dense asphalt mixture: Experimental investigation and predicting model

Asphalt pavement experiences various wet-dry histories in the service stage. However, the influence of wet-dry history on asphalt mixture is unknown. Therefore, to clarify the performance degradation mechanism and predict the performance of asphalt mixture under the action of wet-dry history, the creep-recovery test, indirect tensile stiffness modulus test and indirect tensile strength test were conducted at different temperatures. The finite element method was adopted to analyze the moisture diffusing profile inside the specimen after wet-dry cycles. A moisture damage model considering the soaking time and repeated characteristics was developed to predict the damaged properties. Results show that wet-dry cycles cause a slight mass loss of asphalt mixture. Wet-dry cycling action leads to the increment in high-temperature deformation, and reductions in stiffness modulus and tensile strength. The increase of high-temperature deformation is primarily caused by viscoplastic component. Even if the soaking time is short, high moisture damage occurs while the wet-dry cycle is sufficient. Numerical simulations show that the moisture concentration profiles inside asphalt mixture vary under different wet-dry histories, leading to variations in the damage zone. The degree of damage is also closely related to the acting time of moisture. The critical immersion time of the dense asphalt mixture (about 43 hours) was determined in this study. When the immersion period is shorter than the critical immersion time, the strength loss is greater than the modulus. On the contrary, the degree of modulus damage is higher than that of strength. Considering the actual rainfall climate in China, the strength damage of the on-site asphalt mixture in the field predominates. The proposed model could reflect the weakening trends of modulus and strength. It has good universal applicability in predicting the damaged Marshall stability, modulus, and strength at different temperatures.

In-situ study of microstructure and mechanical properties of GH3536 alloy manufactured by selective laser melting at 750 °C

Nickel-based GH3536 alloy exhibits high strength but low ductility when produced by selective laser melting (SLM), which hinders its widespread application in aerospace. This paper employed a ‘two-step’ method of heat treatment to optimize the microstructure of the SLM GH3536 alloy and investigated the mechanical properties. Tensile tests were conducted on SLM GH3536 alloy before and after heat treatment at 750 °C, using an in-situ high-temperature tensile stage. The relationship between the microstructural evolution and deformation behavior of the alloys was investigated by combining the in-situ tensile experiments and crystal plasticity finite element method (CPFEM). The results suggested that the elongation can be increased by 80% without a significant reduction in tensile strength. The improved elongation is attributed to the complete recrystallization, formation of annealed twins and serrated grain boundaries after heat treatment. The study also investigated the deformation behavior and fracture mode of the alloy before and after heat treatment. Discussion was done on the influence of the microstructure, particularly the twin and serrated grain boundaries on the alloy's plastic deformation. This study enhanced the understanding of plastic deformation of SLM GH3536 alloy and provided a valuable reference for the design and post-treatment of superalloy.

Smart and Green Packaging Made from Chitosan-based Biofilm with the Addition of Ginger Oil and Anthocyanins from Butterfly Pea Flower Extract (Clitoria Ternatea L)

A chitosan-based biofilm modified with ginger essential oil and butterfly flower extract has been made. This biofilm was tested for its potential as a raw material for smart and environmentally friendly packaging (smart and green packaging). The potential of biofilm as a packaging raw material is known from the characterization results, which include color changes at various pHs, mechanical properties, antioxidant properties, antibacterial properties, and morphological structure. The produced biofilms exhibit sensitivity to alterations in pH levels, manifesting distinct color transitions from pink and purple to green within the pH range of 1 to 12. This phenomenon arises due to adding butterfly flower extract into the biofilm, which contains anthocyanin dyes with a total concentration of 1113.3 mg/L. Adding butterfly flower extract and ginger oil contributes to an augmented biofilm thickness; however, this is accompanied by a reduction in both tensile strength and percent elongation. Concurrently, the addition of butterfly flower extract and ginger oil imparts antioxidant and antibacterial properties to the biofilm. The introduction of additional extracts enhances the antioxidant and antibacterial attributes of the biofilm. In the color and pH response assessment, the biofilm augmented with a 7.5% v/v extract exhibited a color difference value (ΔE) exceeding 5 across all assessed pH values. These findings signify the observable color variations in the biofilm due to pH fluctuations with the unaided eye. According to the outcomes of characterization and analysis, the produced biofilm holds promise as an environmentally friendly packaging solution due to its reliance on natural components and its endowed antioxidant and antibacterial properties, contributing to the prolonged preservation of packaged food items. Moreover, the biofilm demonstrates the capability to gauge the quality of food products based on their pH, which is evident through direct color alterations.