Reduction In Surface Area Research Articles

Unlocking the potential of iron-containing mesoporous bioactive glasses: Orchestrating osteogenic differentiation in bone marrow mesenchymal stem cells and osteoblasts

Iron (Fe) is a crucial element in the human body, playing a significant role in bone metabolism. The release of Fe ions at bone defect sites can promote bone regeneration. In this study, we synthesized Fe-containing mesoporous bioactive glasses (Fe-MBGs) in SiO2-CaO-Fe2O3 composition using a sol-gel method. Regardless of the amount of incorporated Fe2O3 (up to 5 mol%), the Fe-MBGs maintained a mesoporous structure, and the inclusion of Fe2O3 did not alter their amorphous characteristics. However, the presence of Fe2O3 led to a reduction in both pore volume and specific surface area of Fe-MBGs. Notably, Fe-MBGs demonstrated degradability in physiological fluids and could sustain release of Si, Fe, and Ca ions. Higher concentrations of incorporated Fe2O3 were found to reduce the degradation of Fe-MBGs. All Fe-MBGs exhibited favorable bioactivity, as evidenced by the rapid formation of hydroxyapatite when exposed to simulated body fluid. Fe-MBGs also demonstrated concentration-dependent effects on BMSCs and Saos-2 cells. Extracts of Fe-MBGs at 0.1 and 1 mg/mL exhibited non-cytotoxicity and promoted cell proliferation. Additionally, extracts of Fe-MBGs at 1 mg/mL significantly enhanced the alkaline phosphatase activity of BMSCs and Saos-2 cells, along with an upregulation of the expression of osteogenesis-related genes. These findings unlock the significant potential of Fe-MBGs as functional biomaterials for bone regeneration applications. The controlled release of Fe ions from these mesoporous bioactive glasses orchestrates osteogenic differentiation in bone marrow mesenchymal stem cells and osteoblasts.

Hydrothermally Synthesized ZnCr- and NiCr-Layered Double Hydroxides as Hydrogen Evolution Photocatalysts.

The layered double hydroxides (LDHs) of transition metals are of great interest as building blocks for the creation of composite photocatalytic materials for hydrogen production, environmental remediation and other applications. However, the synthesis of most LDHs is reported only by the conventional coprecipitation method, which makes it difficult to control the catalyst's crystallinity. In the present study, ZnCr- and NiCr-LDHs have been successfully prepared using a facile hydrothermal approach. Varying the hydrothermal synthesis conditions allowed us to obtain target products with a controllable crystallite size in the range of 2-26 nm and a specific surface area of 45-83 m2∙g-1. The LDHs synthesized were investigated as photocatalysts of hydrogen generation from aqueous methanol. It was revealed that the photocatalytic activity of ZnCr-LDH samples grows monotonically with the increase in their average crystallite size, while that of NiCr-LDH ones reaches a maximum with intermediate-sized crystallites and then decreases due to the specific surface area reduction. The concentration dependence of the hydrogen evolution activity is generally consistent with the standard Langmuir-Hinshelwood model for heterogeneous catalysis. At a methanol content of 50 mol. %, the rate of hydrogen generation over ZnCr- and NiCr-LDHs reaches 88 and 41 μmol∙h-1∙g-1, respectively. The hydrothermally synthesized LDHs with enhanced crystallinity may be of interest for further fabrication of their nanosheets being promising components of new composite photocatalysts.

Innovative suspended ring core fiber for SERS application

Solid core photonic crystal fibers (SC-PCFs) have garnered attention as probes for surface-enhanced Raman spectroscopy (SERS) due to their potential as optofluidic devices, offering heightened sensitivity and reliability compared to traditional planar/colloidal nanoparticle-based SERS platforms. A smaller core allows for more light interaction but might compromise sensitivity and reliability due to reduced surface area for interaction. Here, we introduce an innovative SC-PCF design aimed at resolving the trade-off between increasing the evanescent field fraction and the core surface area. By substituting a suspended silica rod with a suspended thin-silica ring, we augment the surface area for attached nanoparticles by one order of magnitude while retaining a substantial amount of evanescent light interaction with the analyte. Experimental findings showcase an improved sensitivity in SERS signal compared to previously reported top-performing PCF sensor designs. Importantly, with necessary refinement and optimization, this innovative fiber design extends beyond SERS applications, potentially amplifying the sensitivity of various other fiber-based sensing platforms.

Impact of 3-O-caffeoylquinic acid (chlorogenic acid) and Postn protein regulation on cardiomyocyte hypertrophy: Experimental insights and potential therapeutic implications

Background: Cardiac hypertrophy is characterized by an enlarged heart muscle, often due to increased workload or chronic heart diseases. Postn protein (periostin) plays a significant role in cardiac hypertrophy by influencing cardiomyocyte proliferation, inflammatory response, and fibrosis. The TGF-β and NF-κB pathways exacerbate inflammatory responses and structural changes in the heart during cardiac hypertrophy. Chlorogenic acid, found in plants, has antioxidant and anti-inflammatory properties, making it a potential candidate for inhibiting cardiac hypertrophy. Method: We used angiotensin II-induced H9c2 cardiomyocytes to construct a cell model of cardiac hypertrophy. Cells were categorized into control, model, shPostn, chlorogenic acid, and shPostn+chlorogenic acid groups. Various parameters, including cell surface area, activity, apoptosis rate, and expression levels of Postn, TGF-β/NF-κB pathway-related proteins, and mRNA, were evaluated. Results: Compared to the control group, the model group exhibited increased cell surface area and apoptosis rate, along with decreased cell activity. However, intervention with shPostn or chlorogenic acid led to significant reductions in cell surface area and apoptosis rate, coupled with increased cell viability. The shPostn+chlorogenic acid group showed further improvements. In addition, protein and mRNA expressions related to Postn, TGF-β/NF-κB pathways, and cardiac hypertrophy markers were upregulated in the model group but downregulated in the intervention groups, particularly the shPostn+chlorogenic acid group. Conclusion: Chlorogenic acid exerts its inhibitory effect on cardiac hypertrophy by modulating the TGF-β/NF-κB pathway through Postn protein. This study sheds light on potential therapeutic strategies for mitigating cardiac hypertrophy induced by angiotensin II and highlights chlorogenic acid as a promising candidate for further exploration in treating this condition.

Simultaneous Enhancement of Electrical Conductivity and Porosity of a Metal–Organic Framework Toward Thermoelectric Applications

AbstractMetal–organic frameworks (MOFs) exhibit large surface areas and low thermal conductivity, making them promising for thermoelectric generation. However, their limited electrical conductivity poses a significant hurdle to be practically useful. Traditionally, enhancing the electrical conductivity of MOFs typically comes at the cost of reducing surface area, thereby increasing thermal conductivity. This study introduces an approach to simultaneously boost the electrical conductivity and porosity of a MOF‐based material while maintaining remarkably low thermal conductivity. The electrically conductive poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate) (PEDOT:PSS) is deployed to nucleate the growth of Cu3(BTC)2 (or simply CuBTC, where BTC = benzene‐1,3,5‐tricarboxylic acid), resulting in the synthesis of composites labeled CPP‐y (where y denotes wt% PEDOT:PSS). Predictably, the CPP‐y composites are more electrically conductive than pure CuBTC, achieving an electrical conductivity exceeding 1.40 S cm−1 at room temperature. Furthermore, the CPP‐y composites exhibit consistently high Brunauer–Emmett–Teller (BET) surface areas of ≈1600 m2 g−1, comparable to pristine CuBTC, while maintaining thermal conductivities below 0.04 W m−1 K−1 at room temperature. With a high Seebeck coefficient in the range 180–373 µV K−1, CPP‐15 and CPP‐23 demonstrate a figure‐of‐merit (zT) of 0.25 and 0.11, respectively, at 285 K, marking a substantial achievement for MOF‐based materials.

Temperature-Driven Structural Evolution during Preparation of MCM-41 Mesoporous Silica.

This study explores the influence of micelles on the evolution of MCM-41's pore structure via 24 h hydrothermal treatments in a range of temperatures from 100 °C to 200 °C. MCM-41 was characterized using BET, SAXD, FTIR, TEM, and TG-DSC. The findings demonstrate that with temperature elevation from 100 °C to 160 °C, the micelles undergo expansion, leading to an enhanced lattice constant from 4.50 nm to 4.96 nm and an increase in pore diameter from 3.17 nm to 3.45 nm, while maintaining the structural orderliness of the pore channels. Upon cooling, the reversible contraction of micelles and the strategic addition of water glass contribute to a reduction in pore size. However, at a threshold of 180 °C, the SAXD (100) peak's half-peak width surges by approximately 40% relative to that at 160 °C, illustrating a progressive disruption of the hexagonal configuration of MCM-41. Coupled with elevated silica dissolution at higher temperatures in an alkaline solution, a total disintegration of the ordered pore structure at 200 °C results in a drastic reduction in the specific surface area to 307 m2/g. These results are beneficial to developing structural transformation mechanisms of MCM-41 materials and designing mesoporous materials via temperature modulation innovatively.

Optimizing the fluoride removal from drinking water through adsorption with mesoporous magnetic calcite nanocomposites

Fluoride (F−) contamination in groundwater is a global concern arising from natural processes and human activities. This study investigates the adsorption of F− using surface-activated magnetic calcite nanocomposites (NCs) synthesized via co-precipitation assisted wet-impregnation (CP-WI). Various Fe3O4 loadings and calcination temperatures (300 °C and 500 °C) were explored to optimize synthesis parameters. Batch adsorption experiments were conducted to assess the performance of synthesized nanoparticles (NPs) and nanocomposites (NCs). BET, FTIR spectroscopy, X-ray diffraction, and SEM characterization techniques were employed to analyze the physicochemical properties, including surface functional groups, crystallite size, and morphology. The adsorption process was investigated using RSM statistical design with adsorbent dose (A) and F− concentration (B) as independent variables. 0.5Fe-C-NC-5, calcined at 500 °C, exhibited superior adsorption capacity (7.81 mg/g) compared to Fe3O4 and calcite NPs (6.57 mg/g and 6.81 mg/g, respectively). Maximum F− adsorption occurred within 10 min of contact time. NPs and NCs that were exposed to higher calcination temperatures, reaching up to 500 °C, showed an increase in crystallite development while experiencing a reduction in surface area and an enlargement of pore size compared to those treated at lower temperatures. The BET analysis revealed a narrow, slit-like mix of microporous and mesoporous surface with a type IV isotherm and H3 hysteresis loop, indicating multilayer adsorption followed by capillary condensation. The SEM images displayed columnar shapes of CaCO3 polymorph in the prepared Fe3O4-calcite NP and Fe–C NP, which can be attributed to lower calcination or synthesis temperatures.

Changes in brain structure and function in youth at familial risk for schizophrenia or bipolar disorder: implications for early intervention

Abstract The evaluation of child and adolescent offspring of patients with schizophrenia or bipolar disorder seeks to understand changes taking place in the brain in individuals at heightened risk for disease during a key developmental period. In this session I will present findings from the BASYS (Bipolar And Schizophrenia Young offspring Study) cohort, which has recruited young offspring of patients with schizophrenia or bipolar disorder ages 6 to 17 years, using clinical, cognitive and brain imaging measures for over 15 years in Spain. I will begin by reviewing our baseline and 2 year findings using structural magnetic resonance imging (MRI) measures, where we found whole brain and regional cortical grey matter volume and surface area reductions, specifically in offspring of patients with schizophrenia relative to controls, but not in offspring of patients with bipolar disorder, which I will compare with results from the ENIGMA relatives working group analyses. Within our cohort I will expain the relevance of baseline brain structural findings to clinical and cognitive outcome over time. I will then present longitudinal analyses of structural anf functional MRI measures at up to 8 year follow-up, examining the influence of development of psychotic spectrum symptoms over time and cognitive and functional outcomes, on longitudinal brain imaging measures. I will finish the talk explaining avenues for future research in the field, which include incorporating other imaging modalities and validating our findings in other cohorts, while I will also present avenues for increasing understanding of the neurobiological changes underpinning our MRI findings.This project has received funding from Instituto de Salud Carlos III (PI151500467; PI1700741; PI1800696; PI1800976, PI2100330), Fundació Marato TV3 (091630, 202232-30-31), the Catalonia Government (2021SGR01319), PERIS (SLT006/17/00346), Fundació Clínic Recerca Biomèdica (Ajut a la Recerca Pons Bartran), co-financed by ERDF Funds from the European Commission and CIBERSAM.Disclosure of InterestNone Declared

A Novel Therapeutic Approach of 980 nm Photobiomodulation Delivered with Flattop Beam Profile in Management of Recurrent Aphthous Stomatitis in Paediatrics and Adolescents-A Case Series with 3-Month Follow-Up.

Background/Objectives: Recurrent aphthous stomatitis (RAS) is one of the most common oral mucosal lesions and a very debilitating lesion, especially in paediatric and adolescent patients. The current pharmacotherapy offers a pain relief but not without side effects, and therefore photobiomodulation (PBM) can be an alternative therapy. To the authors' best knowledge, no published study has explored the efficacy of λ 980 nm laser PBM in the management of all RAS subtypes in paediatric and adolescent patients, and therefore, this prospective observational clinical study was conducted to bridge this gap by evaluating λ 980 nm laser PBM efficacy in symptomatic RAS management in paediatric and adolescent patients. The objectives were to evaluate (1) pain intensity alleviation; (2) wound healing rate; (3) wound size closure; (4) a complete resolution; (5) evidence of recurrence; and (6) patients' treatment satisfaction. Methods: The study's variables were assessed at the following timepoints: T0: pre-treatment; T1: immediately after first PBM session; T2: 5 hours (h) post first PBM session (via telephone call); T3: immediately after second PBM session (three days post first PBM session); T4: three-day follow-up (after complete PBM treatments); T5: two-week follow-up; and T6: three-month follow-up. The following PBM dosimetry and treatment protocols were employed: λ 980 nm; 300 mW; 60 s; 18 J; CW; flattop beam profile of 1 cm2 spot size; 18 J/cm2; and twice-a-week irradiation (72 h interval). Results: At T1, significant immediate pain intensity relief was reported. 33.33% recorded "4" and 66.67% reported "5" on the quantitative numeric pain intensity scale (NPIS), and this continued to improve significantly (83.33%) at T2. All the subjects reported "0" on the NPIS at T3, T4, T5 and T6. There was a significant reduction in the lesion surface area (>50% complete healing) at T3 compared to T0. Complete healing (100%) with no evidence of scarring and lesion recurrence observed at T4, T5 and T6. Very good patients' satisfaction was reported at all timepoints. Conclusions: This is the first report demonstrating λ980 nm efficacy in all RAS subtype management in paediatric and adolescent patients with a 3-month follow-up, whereby its PBM dosimetry and treatment protocols were effective from scientific and practical standpoints, and hence multicentre RCTs with large data are warranted to validate its reproducibility and to enrich the knowledge of PBM application in all RAS subtypes.

Enhancement of CO2 adsorption performance with the chitosan-modified activated carbon by different methods

Carbon dioxide (CO2) has almost become synonymous with greenhouse gases. Neither improvement of energy efficiency nor the application of alternative energy can reduce the concentration of CO2 to the allowable concentration. Therefore, CO2 must be captured to prevent its escape into the atmosphere. CO2 is commonly adsorbed by activated carbon because of the good affinity between them. In this study, to enhance the CO2 adsorption performance of this material, activated carbon was modified by two ways, synthesis and grafting with chitosan, to examine how the adsorption performance was affected by the different modifications. The experimental results showed that the adsorption performances of activated carbon with grafted chitosan and synthesized with chitosan were better than that of activated carbon. Although the nitrogen content was higher in the activated carbon synthesized with chitosan than in the carbon grafted with chitosan, the adsorption enhancements were similar due to the reduced surface area of the former. In addition, the results of the multi adsorption-desorption processes showed that the adsorption performance of the activated carbon grafted with chitosan slightly decreased, while that of the activated carbon synthesized with chitosan was almost unchanged. As the heterogeneous adsorption was modeled well by the Toth adsorption isotherm model, this isotherm model was used to model the experimental data for comparison with the Freundlich adsorption isotherm model. The average deviation of adsorption uptake fitted by the Toth adsorption isotherm model was about 3.07%, in comparison with 12.71% fitted by the Freundlich adsorption isotherm model.

Hydrodechlorination of trifluoro-trichloroethane to chlorotrifluoroethylene: Revealing the deactivation mechanism and regeneration strategy of Pd-Cu/AC catalyst

Chlorotrifluoroethylene (CTFE) is a vital fluorinated olefinic monomer produced through the catalytic hydrodechlorination of trichlorotrifluoroethane (CFC-113), an eco-friendly process. However, hydrodechlorination catalysts for olefin production often suffer from poor stability. The Pd/AC catalyst and Pd-Cu/AC catalyst prepared by co-impregnation method exhibited poor stability, Pd-Cu/AC catalyst with CFC-113 conversion dropping to around 37% after 50 h of hydrodechlorination reaction. BET, TEM, XPS and XRD of fresh and deactivated Pd /AC catalysts indicate that the deactivation of Pd /AC catalysts is due to high-temperature agglomeration of Pd. Comparative analysis of fresh and deactivated Pd-Cu/AC catalysts using BET, TEM, and TG techniques revealed decreased dispersion of active sites, reduced surface area, catalyst aggregation deactivation, and a significant decrease in Cu content. Furthermore, the results of NH3-TPD revealed that the acid sites of the catalyst increased significantly. XRD spectra indicated the formation of new species, basic copper chloride (Cu2(OH)3Cl), during the reaction. As the reaction progressed, these new species agglomerated, leading to a gradual loss of catalyst activity. Moreover, the deactivated catalyst was successfully reactivated using a simple alkaline washing method.

Synergistic oxidation of toluene through bimetal/cordierite monolithic catalysts with ozone

Toluene treatment has received extensive attention, and ozone synergistic catalytic oxidation was thought to be a potential method to degrade VOCs (violate organic compounds) due to its low reaction temperature and high catalytic efficiency. A series of bimetal/Cord monolithic catalysts were prepared by impregnation with cordierite, including MnxCu5−x/Cord, MnxCo5−x/Cord and CuxCo5−x/Cord (x = 1, 2, 3, 4). Analysis of textural properties, structures and morphology characteristics on the prepared catalysts were conducted to evaluate their performance on toluene conversion. Effects of active component ratio, ozone addition and space velocity on the catalytic oxidation of toluene were investigated. Results showed that MnxCo5−x/Cord was the best among the three bimetal catalysts, and toluene conversion and mineralization rates reached 100 and 96% under the condition of Mn2Co3/Cord with 3.0 g/m3 O3 at the space velocity of 12,000 h−1. Ozone addition in the catalytic oxidation of toluene by MnxCo5−x/Cord could efficiently avoid the 40% reduction of the specific surface area of catalysts, because it could lower the optimal temperature from 300 to 100 °C. (Co/Mn)(Co/Mn)2O4 diffraction peaks in XRD spectra indicated all the four MnxCo1−x/Cord catalysts had a spinel structure, and diffraction peak intensity of spinel reached the largest at the ratio of Mn:Co = 2:3. Toluene conversion rate increased with rising ozone concentration because intermediate products generated by toluene degradation might react with excess ozone to generate free radicals like ·OH, which would improve the toluene mineralization rate of Mn2Co3/Cord catalyst. This study would provide a theoretical support for its industrial application.

High rates of nitrogen removal in aerated VFCWs treating sewage through C-N-S cycle

The efficiency of deep aerated vertical flow constructed wetlands (DA-VFCWs) being operated in Hyderabad, India, was evaluated herein using physicochemical analysis and 16S rRNA amplicon sequencing. The results showed 2–4-fold higher removal rate coefficients for Biochemical oxygen demand (1.32–––3.53 m/d) and nitrogen (0.88––1.36 m/d) in DA-VFCWs than those of passive VFCWs. Elevated sulfate concentration in the DA-VFCWs effluent (84–113 mg/L) indicated possibility of sulfur-driven autotrophic denitrification (SDAD) as a major pathway operating in these wetlands besides the classical nitrogen removal pathways. The presence of nitrifiers (3.09–10.02 %), heterotrophic and aerobic denitrifiers (0.79–0.83 %), anammox bacteria (1.31–2.22 %) and SDAD bacteria (0.08–0.73 %) in the biofilm samples collected from the DA-VFCWs exemplify an interplay of Carbon-Nitrogen-Sulfur cycles in these systems. If proven, the presence of an operational SDAD pathway in DA-VFCWs can help reduce surface area requirement in VFCWs substantially besides alleviating biological clogging of the wetland substrate.

Noncovalent Functionalization of Graphene Nanoplatelets and Their Applications in Supercapacitors.

We demonstrate a simple noncovalent functionalization technique, which involves graphite exfoliation and subsequent coating of the resulting graphene nanoplatelets (GNPs) with trimellitic anhydride (TMA), using a thermomechanical exfoliation process. TMA adsorbs on the surface of the GNPs, resulting in a reduction of the specific surface area to 312 ± 9 m2/g compared to 410 ± 12 m2/g for the unmodified GNPs. Detailed imaging, thermogravimetric, and X-ray diffraction analysis showed that the modified GNPs (TMA-GNPs) maintain similar structure to the unmodified GNPs. The presence of functional groups, confirmed by X-ray photoelectron spectroscopy analysis, caused an increase in the surface energy from 45.6 mJ/m2 for the GNPs to 57.9 mJ/m2 for TMA-GNPs. The resulting coated TMA-GNPs form stable dispersions in water while maintaining their inherent conductive properties, thus enabling applications, such as the manufacture of conductive films and supercapacitors. As a proof-of-concept, electrodes for supercapacitors are prepared from concentrated aqueous dispersions of the functionalized GNPs. Electrochemical characterization of the supercapacitors using electrochemical impedance spectroscopy, cyclic voltammetry and galvanostatic charge/discharge tests showed a specific capacitance of 22.2 F/cm3 at a scan rate of 1 mV/s from cyclic voltammetry and 17.3 F/cm3 at a current density of 1 A/g from galvanostatic charge/discharge tests, with a 90% capacitance retention after 10,000 cycles.

Therapeutic Potential of Sol-Gel ZnO Nanocrystals: Anticancer, Antioxidant, and Antimicrobial Tri-Action.

Zinc oxide nanocrystals (ZnO NCs) hold great promise in nanomedicine with fascinating multifunctional properties. We investigated the therapeutic potential of sol-gel synthesized ZnO NCs with crystal sizes of 52.65 and 25.11 nm, focusing on their anticancer effects on HepG2 and HT29 cells, antioxidant properties, and antimicrobial activity. Both samples displayed a hexagonal wurtzite ZnO structure, wherein the crystal sizes diminished with lower calcination temperatures according to X-ray diffraction. The scanning electron microscopy analysis revealed that lowering the calcination temperature resulted in a decrease in the grain size of the ZnO NCs, as expected. This reduction in grain size combined with a decrease in crystal size resulted in a significant 40% reduction in the reflectance of the ZnO NCs in UV-vis-NIR spectroscopy. It was also observed that the ZnO NCs calcined at higher temperatures exhibited larger particle sizes with a reduced surface area mean of 69.30 μm and a stable negative zeta potential of -11.2 mV. In contrast, the ZnO NCs calcined at lower temperatures exhibited a larger surface area mean of 34.56 μm and a positive zeta potential of +10 mV. In both cell lines, the cytotoxic potential was found to be higher in HepG2 cells. Specifically, when ZnO nanocrystals (NCs) with a crystal size of 52.65 nm were used, the lowest cell viability was observed at a concentration of 5.74 μg/mL. Based on oxidative stress index values, a lower crystal size of ZnO NCs displayed greater effectiveness in HT29 cells, while a higher crystal size of ZnO NCs had pronounced effects in HepG2 cells. Moreover, both ZnO NCs exhibited significant antimicrobial activity against Gram-positive bacteria (Enterococcus faecalis and Staphylococcus aureus) and Candida parapsilopsis fungus. These findings emphasize sol-gel ZnO NCs' potential as versatile agents in nanomedicine, spurring research on targeted cancer therapies and antimicrobial innovations.

Modulating metal-carrier interaction of high-loading Co-Al2O3-SiO2 catalysts for boosted N-propylcarbazole hydrogenation

We developed a series of high-loading Co-Al2O3-SiO2 catalysts to enhance the hydrogenation of N-propylcarbazole (NPCZ) by fine-tuning the Al/Si ratio. Our research reveals that adjusting this ratio can significantly modify the electronic structure of Co nanoparticles, as confirmed by XPS, H2-TPD, and CO-DRIFT analyses, thereby affecting the adsorption of hydrogen species and their interaction with unsaturated π-bonds of NPCZ intermediates. Optimal Al concentration promotes Co nanoparticles dispersion, while excessive Al leads to increased acidity and reduced surface area. The Co70/Al4Si1O catalyst, with an Al/Si ratio of 4, demonstrated superior hydrogenation efficiency by enabling fast and stable hydrogenation of NPCZ, achieving an activation energy of 64.53 kJ/mol and maintaining high performance over 10 cycles. Through DFT calculations, we explored the d-band center and Bader charge across 6 different Co10/Al-Si-O models and assessed the adsorption energies of NPCZ intermediates, along with the energetics of three stepwise reactions. The initial hydrogenation step from NPCZ to 4H-NPCZ is predominantly influenced by the catalyst's acidity/basicity, whereas the subsequent deeper hydrogenation steps of 4H-NPCZ and 8H-NPCZ are governed by the d-π feedback interaction between the metal and the adsorbate. This research offers critical guidance on selecting optimal supports for Co-based catalysts in LOHC hydrogenation.

Comparison of the therapeutic efficacy of magneto-LED therapy and magnetostimulation applied as the adjuvant treatment of venous leg ulcers – preliminary study

ABSTRACT Purpose Venous leg ulcers are chronic wounds that are difficult to cure. The aim of the study was to compare the therapeutic efficacy of two methods of physical medicine – magneto-LED therapy and magnetostimulation, applied as adjuvant treatment in the treatment of venous leg ulcers. Methods The study included 81 patients, 37 male (45.6%) and 44 female (54.3%) ones, age range between 45 and 90 years, with venous leg ulcers. The patients were assigned to two study groups: magneto-LED therapy (group 1) or magnetostimulation (group 2). In both groups, a total of 40 daily procedures were performed. Wound healing was evaluated using computerized planimetry and the pain intensity on numeric rating scale. Results After treatment, the decrease in healing rate in group 1 was statistically significantly higher in comparison to group 2 (p < 0.001), while a statistically significant reduction in the surface area of ulcers was obtained, amounting on the average from 6.34 ± 1.29 cm2 to 2.31 ± 1.25 cm2 in group 1 (p < 0.001), and from 6.52 ± 1.20 cm2 to 4.79 ± 1.17 cm2 in group 2 (p < 0.001). The percentage changes of ulcers area in group 1 (64.21 ± 17.94%) were statistically significantly greater as compared to group 2 (25.87 ± 14.07%) (p < 0.001). After treatment, the decrease in pain relief in group 1 was statistically significantly higher in comparison to group 2 (p = 0.006), while pain intensity after treatment decreased statistically significantly in both compared groups of patients (p < 0.001). Conclusions Magneto-LED therapy and magnetostimulation caused significant reduction of surface area of the treated venous leg ulcers and pain intensity, yet magneto-LED therapy was more efficient. Both evaluated methods also significantly reduced pain intensity.

Peculiarities of Skin Wound healing Under Ischemic Conditions With Topical Treatment Using a Combination of Benzalkonium Chloride and Dexpanthenol

Objective: To study peculiarities of skin wound healing under ischemic conditions with topical treatment using a combination of benzalkonium chloride and dexpanthenol.Materials and methods: We conducted an experiment on a rat model of skin wound healing under ischemic conditions. Male Wistar rats were divided into 4 groups, with 30 rats in each group. Group 1 received no treatment; group 2 was treated with the Levomecol ointment; group 3 and group 4 were treated with benzalkonium chloride immobilized based on the carboxymethylcellulose sodium salt and a combination of benzalkonium chloride and dexpanthenol immobilized based on the carboxymethylcellulose sodium salt, respectively. We used planimetric and biochemical (alkaline phosphatase [ALP] level) methods, measured the pH of the wound surface and wound bed temperature, determined the hydroxyproline concentration in the wound defect tissues, and performed statistical processing of the data.Results: Group 4 had the largest percentage of wound surface area reduction and pH values. Thermometry on day 10 showed a decrease in wound temperature in groups 2 and 4, whereas groups 1 and 3 demonstrated maximum values. By the end of the experiment, group 4 had the maximum hydroxyproline concentration that was significantly higher than the amino acid content in groups 1, 2, and 3: 1.2, 1.1 and 1.1 times higher, respectively. Maximum ALP levels were observed on day 5 in group 4, whereas in groups 2 and 3 they were observed on day 8 and only on day 10 in group 1.Conclusions: Skin wound healing under ischemic conditions was faster in the group in which topical treatment involved a combination developed by us: benzalkonium chloride and dexpanthenol immobilized based on the carboxymethylcellulose sodium salt.

Ivermectin-Loaded Mesoporous Silica and Polymeric Nanocapsules: Impact on Drug Loading, In Vitro Solubility Enhancement, and Release Performance.

Ivermectin (IVM), a widely used drug for parasitic infections, faces formulation and application challenges due to its poor water solubility and limited bioavailability. Pondering the impact of IVM's high partition coefficient value (log P) on its drug release performance, it is relevant to explore whether IVM nanoencapsulation in organic or inorganic nanoparticles would afford comparable enhanced aqueous solubility. To date, the use of inorganic nanoparticles remains an unexplored approach for delivering IVM. Therefore, here we loaded IVM in mesoporous silica particles (IVM-MCM), as inorganic nanomaterial, and in well-known poly(ε-caprolactone) nanocapsules (IVM-NC). IVM-MCM had a well-organized hexagonal mesoporous structure, reduced surface area, and high drug loading of 10% w/w. IVM-NC had a nanometric mean size (196 nm), high encapsulation efficiency (100%), physicochemical stability as an aqueous dispersion, and drug loading of 0.1% w/w. Despite differing characteristics, both nanoencapsulated forms enhance IVM's aqueous intrinsic solubility compared to a crystalline IVM: after 72 h, IVM-MCM and IVM-NC achieve 72% and 78% releases through a dialysis bag, whereas crystalline IVM dispersion achieves only 40% drug diffusion. These results show distinct controlled release profiles, where IVM-NC provides a deeper sustained controlled release over the whole experiment compared to the inorganic nanomaterial (IVM-MCM). Discussing differences, including drug loading and release kinetics, is crucial for optimizing IVM's therapeutic performance. The study design, combined with administration route plans and safety considerations for humans and animals, may expedite the rational optimization of IVM nanoformulations for swift clinical translation.

Physiological Nitrogen Uptake and Utilisation Responses in Two Native Plants from the Qinghai-Tibet Plateau under Different Water and Fertiliser Conditions

Drought and poor soil quality are the main characteristics of extreme environments in arctic–alpine areas. Understanding how herbaceous plants in alpine grasslands maintain the normal supply and utilisation of nutrients under different rainfall conditions is key to maintaining population stability. In the present study, the native plants Poa crymophila and Stipa purpurea of the Qinghai–Tibet Plateau were used to conduct a controlled experiment involving water and fertiliser to analyse their physiological responses in terms of nutrient uptake and utilisation. The results showed that decreased soil moisture increased proline and non-structural carbohydrates in P. crymophila, mainly accumulating in the leaves and stems. Nitrogen (N) addition promoted proline accumulation, whereas nonstructural carbohydrate content decreased. However, the proline and non-structural carbohydrate contents of S. purpurea were less affected by water and fertiliser. Additionally, drought restricted rhizospheric and non-rhizospheric alkaline-hydrolysed N release, increased rapidly available phosphorus (RAP) content in rhizospheric soil, limited root growth, and reduced surface area, root length, and root volume. Both aboveground and underground N fertiliser utilisation rates decreased. Under well-hydrated conditions (WH), high N levels increased rhizospheric alkaline-hydrolysed N and urease activity while inhibiting RAP and activity of alkaline phosphatase contents, thereby limiting root growth and reducing N fertiliser utilisation. The results indicate that both plant species have relatively low overall nutrient requirements that are limited mainly by water availability. The addition of low amounts of fertiliser is beneficial for nutrient release and utilisation, improving their adaptability to arctic–alpine environments and their suitability and superiority in the community. This study has significant implications for nutrient management and ecological restoration measures in arctic–alpine grasslands.