Demand Reduction Research Articles

Glycemic Control in Diabetic Patients Receiving a Diabetes-Specific Nutritional Enteral Formula: A Case Series in Home Care Settings.

In patients with Diabetes Mellitus (DM), Enteral Nutrition (EN) is associated with less hyperglycemia and lower insulin requirements compared to Parenteral Nutrition (PN). The primary aim of this study was to assess changes in glycemic control (GC) in DM patients on EN therapy. The secondary objectives included evaluating the impact of the specialized formula on various clinical parameters and the tolerability of the nutritional formula by monitoring potential gastrointestinal side effects. We report a case series on the effects of a Diabetes-Specific Formula (DSF) on GC, lipid profile (LP), and renal and hepatic function in a DM cohort receiving EN support. Twenty-two DM subjects with total dysphagia (thirteen men, nine women) on continuous EN were observed. The use of a DSF in EN was associated with an improvement in glycemic indices across all patients studied, leading to a reduction in average insulin demand. No hospitalizations were reported during the study period. The study demonstrated that the use of DSFs in a multi-dimensional home care management setting can improve glycemic control, reduce glycemic variability and insulin need, and positively impact the lipid profile of the DM cohort. The metabolic improvements were supported by the clinical outcomes observed.

Application of algal-mycelial pellets in the treatment of the mariculture wastewater

Hypersaline mariculture wastewater necessitates treatment prior to its discharge into marine environments. Algal-mycelial pellets (AMPs), known for their cost-effectiveness, energy efficiency and sustainability, have not been previously explored for their flocculation and pollutant removal capabilities in hyperhaline conditions. This work employed an orthogonal test design to investigate the effects of nine factors at three levels on the treatment efficiency of mariculture wastewater using Chlorella sp. TNBR1 and Aspergillus niger AMPs. The comprehensive optimal conditions for achieving the highest flocculation efficiency and pollutant removal are determined to be a temperature of 30 °C, light intensity of 6000 lux, a 12:0 light-dark cycle, an initial pH of 6, a microalgal density of 11.25 × 106 cell/mL, microalgal growth phase at the early logarithmic stage, a fungal spore density of 9.00 × 105 spore/mL and a fungal pellet phase of 60 h. Under such conditions, the treatment of nonsterile actual mariculture wastewater with Chlorella sp. TNBR1 and Aspergillus niger AMPs results in a 93.35 %±7.20 % reduction in chemical oxygen demand (COD), 92.83 %±7.29 % reduction in total nitrogen (TN), 100 % removal of total phosphorus (TP), and a flocculation efficiency of 69.21 %±5.36 %. These findings confirm that AMPs are a viable solution for effectively treating COD, TN and TP in real hypersaline mariculture wastewater, while also facilitating the flocculation and harvesting of microalgae.

An automated approach for carbon integration in industrial park

Industrial park is a hub for various industrial activities. Industrial emissions are one of the main sources of carbon emissions. The reduction of carbon emissions is crucial to achieve carbon neutrality for industrial parks. This paper presents an automated approach to maximize the utilization of CO2 among different plants in industrial parks through carbon allocation network. The minimum target of external fresh CO2 is determined based on automated composite table algorithm (ACTA), which is then materialized with the detailed design of carbon allocation network. A case study with four scenarios were analyzed to systematically guide the carbon reduction process towards its carbon neutrality target. Direct utilization scenario refers to CO2 utilization between sources and sinks in the parks without any purification scheme. Sink manipulation and source reduction scenarios indicate that process parameter changes, equipment modifications and other measures in the sinks or sources lead to the reduction of CO2 demands or supplies. In the purification scenario, CO2 is purified to different concentrations to maximize its allocations among different plants. A case study based on chemical industrial park in Fuyang, China is presented to illustrate the approach. Four factories (coal-fired power, cement, ammonia, ethanol) were identified as carbon sources, while three others (urea, methanol, dimethyl ether) as carbon sinks. By implementing sink manipulation and source reduction, the fresh CO2 resources and CO2 emissions are effectively reduced to 205.25 t/h and 149.61 t/h, respectively. The result for purification scenario indicates that CO2 emissions can be decreased from 317.33 t/h to 105.72 t/h, with an overall reduction of 66.68 %, while the fresh carbon requirement is reduced from 357.41 t/h to 161.34 t/h. This work provides a useful tool for the utilization of excess CO2 within an industrial park.

Treatment of the Textile Wastewater using Malaysian Ganoderma lucidum Mycelial Pellets

Purification of textile wastewater using biomass and in particular different fungi is gaining exponential interest to minimize the impacts of current physical-chemical and biological wastewater treatment by-products. This study investigates the potential of Malaysian Ganoderma lucidum mycelium pellets (GLMP) for the decontamination of wastewater samples received from a commercial textile manufacturer. All studies were performed under ambient temperature (26-35 ℃) and unsterilized conditions using a simple bioreactor design (stirred batch bioreactor) for a more practical assimilation of the current available wastewater treatment process system. The optimal conditions of adsorption by GLMP were determined by variation effects of adsorbent concentration (0, 8.75, 12.5 and 25 g/L), pH (unadjusted 7.10 – 8.22, 4 and 6), and wastewater dilution factor (1:0, 1:4, and 2:3, v/v). This method was proved to be effective in both decolorization and chemical oxygen demand (COD) reduction, simultaneously. The most significant percentage of decolorization observed was 77.24% in a 72 h treatment, whereas COD reductions were 78.32% in a 36 h treatment. The present study fits both Langmuir and Freundlich adsorption isotherms as the values of R2 both model were close to 1, indicating the favorable adsorption of dyes towards Malaysian GLMP.

Docking, MD Simulations, and DFT Calculations: Assessing W254's Function and Sartan Binding in Furin.

Furins are serine endoproteases that are involved in many biological processes, where they play important roles in normal metabolism, in the activation of various pathogens, while they are a target for therapeutic intervention. Dichlorophenyl-pyridine "BOS" compounds are well known drugs that are used as inhibitors of human furin by an induced-fit mechanism, in which tryptophan W254 in the furin catalytic cleft acts as a molecular transition energy gate. The binding of "BOS" drug into the active center of furin has been computationally studied using the density functional theory (DFT) and ONIOM multiscaling methodologies. The binding enthalpies of the W254 with the furin-BOS is -32.8 kcal/mol ("open") and -18.8 kcal/mol ("closed"), while the calculated torsion barrier was found at 30 kcal/mol. It is significantly smaller than the value of previous MD calculations due to the relaxation of the environment, i.e., nearby groups of the W254, leading to the reduction of the energy demands. The significant lower barrier explains the experimental finding that the dihedral barrier of W254 is overcome. Furthermore, sartans were studied to evaluate their potential as furin inhibitors. Sartans are AT1 antagonists, and they effectively inhibit the hypertensive effects induced by the peptide hormone Angiotensin II. Here, they have been docked into the cavity to evaluate their effect on the BOS ligand via docking and molecular dynamics simulations. A consistent binding of sartans within the cavity during the simulation was found, suggesting that they could act as furin inhibitors. Finally, sartans interact with the same amino acids as W254, leading to a competitive binding that may influence the pharmacological efficacy and potential drug interactions of sartans.

Position Statement of the Italian Society of Cardiovascular Prevention (SIPREC) and Italian Heart Failure Association (ITAHFA) on Cardiac Rehabilitation and Protection Programs as a Cornerstone of Secondary Prevention after Myocardial Infarction or Revascularization.

Despite the remarkable and progressive advances made in the prevention and management of cardiovascular diseases, the recurrence of cardiovascular events remains unacceptably elevated with a notable size of the residual risk. Indeed, in patients who suffered from myocardial infarction or who underwent percutaneous or surgical myocardial revascularization, life-style changes and optimized pharmacological therapy with antiplatelet drugs, lipid lowering agents, beta-blockers, renin angiotensin system inhibitors and antidiabetic drugs, when appropriate, are systematically prescribed but they might be insufficient to protect from further events. In such a context, an increasing body of evidence supports the benefits of cardiac rehabilitation (CR) in the setting of secondary cardiovascular prevention, consisting in the reduction of myocardial oxygen demands, in the inhibition of atherosclerotic plaque progression and in an improvement of exercise performance, quality of life and survival. However, prescription and implementation of CR programs is still not sufficiently considered.The aim of this position paper of the Italian Society of Cardiovascular Prevention (SIPREC) and of the Italian Heart Failure Association (ITAHFA) is to examine the reasons of the insufficient use of this strategy in clinical practice and to propose some feasible solutions to overcome this clinical gap.

Automated multifactorial design of experiment and Bayesian optimisation algorithm approaches to method development for the green analysis by supercritical fluid chromatography of a pharmaceutical ingredient

During drug development, chromatography is frequently used for purity and stability testing of both drug substance and drug product. Reversed phase liquid chromatography (RPLC) is one of the most widely used methodologies due to its wide scope of application. In the later stages of drug development, the specified impurities and degradation products that define the critical quality attribute of the final API, also known as Key Predictive Sample Set (KPSS), are usually well defined and controlled. At this point, a method review enables selecting the most appropriate technique which should be the one providing optimal robustness (ICH-Q14[1]), with the support of Quality by Design (QbD) approaches. Supercritical Fluid Chromatography (SFC) is a preferred technique for its proven diversity in selectivity. The adoption of a technique which presents the most favourable environmental impact, such as, but not limited to, SFC, is also becoming increasingly important as laboratories strive to reduce carbon footprint. Re-developing a method requires high resource-demands in terms of staff, materials, and time. Any step of the process that can be automated can facilitate this approach, speeding up the delivery of the method whilst preserving robustness.In this article we describe how an SFC method was developed for the purity profiling of a late-stage oncology candidate, taking advantage of the superior selectivity of SFC towards structurally similar analytes, owed to the high orthogonality with R2 as low as 0.014 towards the KPSS. We describe two approaches to automate the method development. Firstly, a multifactorial design of experiments (DoE) and secondly, an optimization via a Bayesian algorithm, which was completed in one night, highlighting the potential and limitations, with an insight into the robustness. Both methods achieved baseline separation with varying levels of automation embedded into the process and a large reduction of the resource demands when compared to traditional optimisation methods. Finally, we describe the beneficial environmental impact that implementing SFC methods can yield, with a calculated green score reduced to a value between 17 and 30 % compared to RPLC, depending on the number of runs per sequence.

Agricultural Technological Change, Female Earnings and Fertility: Evidence from Brazil

Abstract I study how agricultural technological change affects labour market opportunities and fertility in a developing country context. Exploiting plausibly exogenous variation in the adoption of genetically engineered soy across municipalities in Brazil, I show that this labour-saving technology reduced female agricultural earnings and employment without inducing any female sectoral reallocation. Furthermore, this technology adoption increased fertility due to increases in overall household earnings and substitution effects driven by the reduction in female labour demand. These results suggest that technological progress in developing countries may not improve female economic opportunities or lower fertility unless substitution effects are negative and sufficiently large.

Global addiction university education: a survey of members of International Consortium of Universities for Drug Demand Reduction (ICUDDR)

ABSTRACT Background Quality education is needed for providing quality addiction care. There are addiction university-based programmes worldwide, differing in their characteristics leading to different profiles. The ICUDDR is a global consortium of universities preparing the addiction workforce providing networking and collaboration. The purpose was to categorize the characteristics of the addiction degree programmes, compare them to the first proposed typology of such programmes, and emphasize the meaning of quality in education. Methods The sample consisted of 99 self-selected representatives from 396 current member institutions of ICUDDR. Data were collected using a questionnaire in an online format and analyzed using Microsoft Excel. Results 35 universities operated at least one degree programme in addictions. Of these, five offered bachelor’s, 16 master’s, and five PhD programmes, and 17 universities provided programmes awarding graduate/postgraduate certificate or diploma. The main focuses of specialized programmes included mostly treatment and prevention. Compared to the typology, we identified all types proposed, and two new types appeared. Conclusions The work provides the first comparison of the proposed typology to the reality of the global representation of universities providing addiction studies and emphasizes the importance of quality assurance and collaboration in addiction education.

Functional somatic symptoms in Emergency Department frequent presenters

BackgroundPatients with Functional Somatic Symptoms (FSS) are frequently encountered within healthcare settings such as Emergency Departments (ED). There is limited research regarding characterisation and frequency of FSS within frequent presenters to ED and no previous Australian evidence. This study aims to fill this gap.MethodsA retrospective, single-centre study of frequent ED presenters over a 6-month period was undertaken. Patients with > 3 re-presentations/month were reviewed for the presence of FSS using Stephenson and Price’s (Stephenson DT, Price JR. Medically unexplained physical symptoms in emergency medicine. Emerg Med J. 2006;23(8):595.) categorisation of FSS. Patients were divided into three groups – FSS, possible FSS (pos-FSS) and non-FSS. The characteristics of these groups were compared using descriptive statistics (chi-square tests, Welch’s ANOVA). Person-time at risk during the 6-month study period was estimated for patients in each group and incidence of ED presentation for each group was then calculated. Psychological distress indicators for ED presenters with FSS, as noted by the treating clinician, were also analysed.Results11% (71/638) of frequent ED presenters were categorised as having FSS and 72% (458/638) as having possible FSS (Pos-FSS). Mean ED presentations in the FSS group during the study period were significantly higher than in the non-FSS and Pos-FSS groups (p < 0.01). Anxiety was found to be the primary psychological distress indicator associated with ED presentations with FSS.ConclusionWe found that, amongst frequent ED presenters, patients with FSS presented significantly more frequently to ED than those without FSS. We propose revising the model of care for FSS in ED to promote appropriate referral to therapy services as a possible demand reduction strategy to improve patient care and efficiency in ED.

Kansas agriculture in 2050: a pathway for climate-resilient crop production

IntroductionAdvances in farming technologies and practices have helped farmers to increase crop yields, but continued production increases – while needed to feed a growing global population – are being hindered by climate change and other environmental challenges. Kansas, a globally important region for wheat production, is already experiencing threats to staple crop production. This study explores one possible alternative future for Kansas crop production in which farmers could, by crop switching, continue to grow nutrient-rich crops while responding to hotter temperatures and increasing water demand.MethodsWe used a combination of climate and crop modeling with simple water budgets to identify optimal crop mixes under anticipated climatic and water constraints. Interviews with Kansas farmers helped identify feasible crop switching options: sorghum instead of corn (maize), winter rye and winter oats instead of winter wheat, and millet instead of soybeans.ResultsOur analysis suggests that a sizeable proportion of current Kansas cropland would need to shift to these alternative crops by 2050 to meet anticipated water constraints and produce equivalent nutritional value under projected climate conditions. Alternative crops could increase from 16% of Kansas' crop area in 2021 to 43% of the area in 2050, resulting in a reduction in 2050 crop water demand of 12% relative to that of the current crop mix. This crop water demand reduction would be concentrated in parts of the state that will experience the greatest change in water needs between today and mid-century due to changing climate conditions.DiscussionOur analysis shows that, by changing (diversifying) the mix of crops grown, it is biophysically possible for crop production in Kansas to be both sustainable and resilient under future climate conditions. However, achieving a more climate-resilient crop mix on the ground, in Kansas and elsewhere, will require major shifts in the broader agricultural system. Food companies, agricultural lenders, and policymakers can play a key role in enabling farmers to adapt cropping systems in the face of climate and environmental challenges.

Examining the non-linear impact of fossil and renewable energy consumption on Vietnam’s ecological footprint: insights from the asymmetric ARDL approach

Vietnam’s economy is rapidly growing, marked by an increasing reliance on fossil fuels and renewable energy sources, resulting in unsustainable consumption patterns. The primary objective is to investigate the implications of renewable and non-renewable resource consumption on the overall resource availability over the long term, as indicated by the ecological footprint. Furthermore, the study incorporates economic growth to examine the Environmental Kuznets Curve hypothesis in Vietnam. Methodologically, the study adopts the asymmetric Autoregressive Distributed Lag model, utilizing time-series data ranging from 1986 to 2022. The findings highlight that Vietnam’s economic growth still use more natural resources while compromising the overall ecological reserve. Furthermore, the research findings suggest that the Environmental Kuznets Curve hypothesis does not hold in the context of Vietnam. Specifically, the increasing share of primary energy sourced from fossil fuels is observed to coincide with an increase in demand in ecological footprint. In contrast, an increase in primary energy consumption from renewable sources demonstrates a marked reduction in natural resource demand over the long term. Several strategies are recommended to enhance the resilience of environmental resources, such as adopting new and energy-efficient technologies is necessary within the industrial sector, promote the utilization of renewable energy sources, enhance waste management systems, transition from conventional energy to renewable sources in both production and consumption and the formulation of legislation on renewable energy usage.

Outdoor testbeds for studies on performance of building envelopes: review and recommendations

High-performance building envelope materials, components and systems have been developed to achieve reduction in energy demand and meanwhile maintaining a satisfactory indoor environmental quality. The performance of building envelopes is generally assessed through numerical and experimental methods. Experimental work conducted with outdoor testbeds provides live data under real weather conditions, and therefore become an effective approach to evaluating the performance façade technologies. This paper reviewed 82 outdoor testbeds employed in studies on performance of building envelopes. They are categorized according to scale and form. Representatives in each category are discussed in details, and the main features are compared and summarized systematically. The functions of testbeds are analyzed according to the dedicated experimental purposes. Different construction materials and structures are also compared. On this basis, recommendations are made for future design, construction and application of outdoor testbeds.

Energy Losses or Savings Due to Air Infiltration and Envelope Sealing Costs in the Passivhaus Standard: A Review on the Mediterranean Coast

To obtain the Passivhaus Certificate or Passivhaus Standard (PHS), requirements regarding building envelope air tightness must be met: according to the n50 parameter, at a pressure of 50 Pa, air leakage must be below 0.6 air changes per hour (ACH). This condition is verified by following the blower door test protocol and is regulated by the ISO 9972 standard, or UNE-EN-13829. Some construction techniques make it easier to comply with these regulations, and in most cases, construction joints and material joints must be sealed in a complex way, both on façades and roofs and at ground contact points. Performing rigorous quality control of these processes during the construction phase allows achieving a value below 0.6 ACH and obtaining the PHS certification. Yet, the value can increase substantially with the passage of time: as windows and doors are used, opened, or closed; as envelope materials expand; with humidity; etc. This could result in significant energy consumption increases and losing the PHS when selling the house at a later point in time. It is therefore important to carefully supervise the quality of the construction and its execution. In this study, we focused on a house located in Sitges (Barcelona). The envelope air tightness quality was measured during four construction phases, together with the sealing of the joints and service ducts. The blower door test was performed in each phase, and the n50 value obtained decreased each time. The execution costs of each phase were also determined, as were the investment amortisation rates based on the consequent annual energy demand reductions. Air infiltration dropped by 43.81%, with the final n50 value resulting in 0.59 ACH. However, the execution costs—EUR 3827—were high compared to the energy savings made, and the investment amortisation period rose to a 15- to 30-year range. To conclude, these airtightness improvements are necessary in cold continental climates but are not applicable on the Spanish Mediterranean coast.

Ultrasound‐assisted synthesis of biodiesel in the presence of a novel catalyst recovered from waste effluent/water: A mini‐review

AbstractThe government of India has mainly focused on waste management, environment protection acts, and control of energy demand, which will lead to the development of a clean and green India. Nowadays most of the drinking water is getting polluted due to the harmful gases released by well‐renowned industries mining operations, alloy industries, and dye industries. The presence of more amounts of heavy metals in drinking water leads to a rise in chemical levels than the constrained level in the environment, inside a human body, and any living being. Protection of the environment through the recovery of heavy metals from waste effluents through a chemical activation process using bio‐derived activated carbons as adsorbents is one of the known strategies in the current decade that can be adopted. The application of these heavy metals as catalysts in the synthesis of biodiesel from nonedible oils through an ultrasound (US)‐assisted process is one of the emerging strategies that will help in the reduction of energy demand. In the current review, the recovery of heavy metals from the waste effluents through a conventional chemical activation process and their applications as catalysts in the US‐assisted synthesis of biodiesel from nonedible oils is discussed.

A constrained price-based demand response framework employing utility functions in three-state Overlapping Generation and Gift and Bequest based model in distribution system

Demand response provides an opportunity for consumers to play a significant role in the operation of the electric grid by reducing or shifting their electricity usage during peak periods in response to time-based rates or other forms of financial incentives. These programs are important as they have the potential to help electricity providers save money through reductions in peak demand and the ability to defer construction of new power plants and power delivery systems specifically, those reserved for use during peak times. For the successful application of DR in day-to-day life, DR models are necessary to be implemented. Many of the existing DR models primarily focus on the formulation of after-DR demand based on price elasticity. Though these models are devoid of basic humans’ micro-economic behavior, which is an essential part of a DR stakeholder. Considering these shortcomings of the existing DR literature, this paper envisages formulating DR models based on the foundation of basic humans’ manifestations of demand flexibility, willingness, load recovery, and altruistic behavior. Hence, this paper proposes two price-based DR models known as the three-state Overlapping Generation (OLG) model and the Gift and Bequest (G&B) based DR model. These models are based on customers’ microeconomic behaviors and are suitable for representing load recovery with minimal parameters. Both three-state OLG and G&B-based DR models are examined on IEEE 33-bus and 118-bus distribution systems and are compared with the existing price-elasticity model (PEM) and two-state OLG-based DR model.

Advancing thermal control in buildings with innovative cementitious mortar and recycled expanded glass/n-octadecane phase change material composites

This study delves into the role of phase change materials (PCMs) in bolstering energy efficiency, particularly in response to escalating global energy consumption in construction. The research focuses on integrating recycled expanded glass (REG) as a support material for shape-stabilized PCMs, specifically emphasizing n-octadecane (nOD) in cement mortars. With nOD exhibiting a melting point around 27 °C and a high latent heat thermal energy storage (TES) capacity of 241 J/g, various analyses, including DSC, FT-IR, SEM, TGA, and thermoregulation tests, assess the impact of different nOD/REG concentrations on TES properties. Alterations in physico-mechanical properties of mortar mixtures are noted with increasing REG/nOD content, impacting porosity and water absorption. The incorporation of REG/nOD PCMs decreases thermal conductivity, from 0.3620 W/mK (no PCM) to 0.1494 W/mK (full replacement). Thermo-regulation tests highlight PCM’s ability to counteract temperature fluctuations, surpassing results from other studies. Temperature difference outcomes (−10.60 °C daytime cooling, 4.00 °C nighttime heating) establish REG/nOD as promising for sustainable construction. The research evaluates PCM-infused concrete’s impact on building energy efficiency, noting significant heat demand reductions across climates and wall thicknesses. Carbon emissions decrease notably, especially with coal as the fuel source. Customized material thickness in PCM-integrated walls shows potential for substantial energy savings. These findings contribute valuable insights to the viability of REG/nOD composites in mitigating heating and cooling loads, advancing sustainable building solutions.

Metabolic Control of Sugarcane Internode Elongation and Sucrose Accumulation

The relationship between metabolic changes occurring in the developing internodes of sugarcane and the final yield and sugar characteristics is poorly understood due to the lack of integration between phenotypic and metabolic data. To address this issue, a study was conducted where sugarcane metabolism was modeled based on the measurement of cellular components in the top internodes, at two stages of crop development. The study also looked at the effects of Trinexapac-ethyl (Moddus®) on growth inhibition. The metabolome was measured using GC-analysis, while LC-MS/MS was used to measure proteome changes in the developing internodes. These data were then integrated with the metabolic rates. Regardless of the growth rate, internode elongation was restricted to the top five internodes. In contrast, sucrose and lignin accumulation was sensitive to the growth rate. Crossover plots showed that sucrose accumulation only occurred once the cell wall synthesis had slowed down. These data suggest that sucrose accumulation controlled a reduction in sucrose breakdown for metabolic activity and a reduction in demand for carbon for cell wall polysaccharide synthesis. This study also found that nucleotide sugar metabolism appears to be a key regulator in regulating carbon flow during internode development.

Self-centering dual rocking core system with viscous dampers in additional rocking sections

To mitigate the high mode effects and reduce the force requirements of the structural members in the multi-story self-centering dual rocking core (SDRC) system, this paper proposes the multiple self-centering dual rocking core system with viscous dampers in additional rocking sections (MSDRCV system). The sketch and ideal working mechanisms of the MSDRCV system are interpreted. The additional rocking sections are set to decrease the force requirements of structural members and viscous dampers are included to mitigate high mode responses of the additional rocking sections, introducing seismic performance enhancement. Comparative analyses on a 9-story MSDRCV system with viscous dampers in rocking sections, a 9-story multiple self-centering dual rocking core system without viscous dampers in rocking sections (MSDRC system) and a 9-story SDRC system were carried out. The MSDRCV and MSDRC system can realize the reduction of the force demands in structural members in contrast to the SDRC system. Nevertheless, the high mode responses caused the uncontrollable displacement concentration in the MSDRC system and hence aggravated the seismic performance under rare seismic events. The analysis results in the frequency domain confirmed that the viscous dampers in the MSDRCV system can efficiently control the high-mode responses. The effects of the design parameters of the viscous dampers on the peak responses of the MSDRCV systems were comprehensively studied via parametric analyses. The results offer guidance for the viscous dampers design.

Evolution of Tax Exemption Policy and Pricing Strategy Selection in a Competitive Market

The evolution of tax exemption policies and consumer preferences for low-carbon products affect firms’ optimal pricing strategy selection in a competitive duopoly market. In our study, we build a two-period pricing model to examine the pricing strategy choices between low-carbon and traditional firms. Low-carbon firms offer consumers greater value, improving their overall experience and satisfaction. Given the evolution of government policies from tax exemption to taxation for low-carbon products, we divide the changes in carbon tax into two periods. Since each firm can choose either the uniform pricing strategy (setting the same price in both periods) or the tiered pricing strategy (setting different prices for two periods), four scenarios may occur. Conventional wisdom suggests that a firm’s pricing increases should result in a reduction in consumer demand. Interestingly, our results show that as traditional firm raises prices, consumer demand for traditional products could increase simultaneously in the second period. In such a case, the low-carbon firm selects the uniform pricing strategy and the traditional firm chooses the tiered pricing strategy. Moreover, as tax exemption policies evolve in duopoly markets, the cancellation of the tax exemption policy may intensify competition between traditional and low-carbon firms under certain conditions. Furthermore, given one firm’s pricing strategy, our results show that the other firm could adopt either a uniform pricing strategy or a tiered pricing strategy, which depends on the low-carbon advantage and tax rate.