Reduce Matrix Interference Research Articles

A metal–organic frameworks-imprinted emulsion interface with dynamic size- and site-selective recognition for significantly enhanced flavoniods extraction

The boronic acid suspended Cr based MIL-100 (MIL-100-B) sorbents have been widely used to separation of cis-diol containing molecules. However, it’s still challenging in fabrication of high performance metal organic frameworks (MOFs) due to its irregular size and low content of functional groups. For improving identification efficiency, the emulsion microreactor were firstly designed to purify MIL-100-B prior to their use. Herein, a highly ordered MOFs-imprinted polymer microsphere was synthesized by O/W Pickering emulsion template, which can highly selective separation of MIL-100-B via the synergistic effect of boronic acid sites and imprinted cavities. The obtained purified H-MIL-100-B exhibited the uniform size and abundant boronic acid groups (B elements ratio up to 27.37 %). The emulsion imprinted microsphere (EIMs) showed the good selectivity towards MIL-100-B. Additionally, the obtained MOF-imprinted microsphere exhibited green, convenient, sustainable separation process towards the purification and recycle of MIL-100-B. The purified MOFs (H-MIL-100-B) were used to specific bind with cis-diol flavoniods naringin (NRG). Satisfactorily, H-MIL-100-B show high adsorption amount (43.69μmol/g at 308 K), fast capture kinetics (160 min), high selectivity and excellent regenerability (up to seven cycles). Remarkably, the purified NRG solutions displayed lasting antibacterial activity against Staphylococcus aureus (S. aureus) with inhibition zone of 13.47 mm. More importantly, the H-MIL-100-B could effectively promote the specific recognition ability of NRG by reducing matrix interference and improving purification efficiency (93.93 %) from complex natural extracts. A high score (0.75) was predicted via analytical GREEnness (AGREE) approaches, demonstrating environmentally friendly and greenness of separation process. The MOFs-imprinted emulsion microspheres possessed dynamic recognition properties towards target MOFs, thus opening new direction for the development of convenient and efficient microreactor for the purification of other functional MOFs.

Site-Specific Stability Evaluation of Antibody-Drug Conjugate in Serum Using a Validated Liquid Chromatography-Mass Spectrometry Method.

Antibody-drug conjugate (ADC) consists of engineered antibodies and cytotoxic drugs linked via a chemical linker, and the stability of ADC plays a crucial role in ensuring its safety and efficacy. The stability of ADC is closely related to the conjugation site; however, no method has been developed to assess the stability of different conjugation sites due to the low response of conjugated peptides. In this study, an integrated strategy was developed and validated to assess the stability of different conjugation sites on ADC in serum. Initial identification of the conjugated peptides of the model drug ado-trastuzumab emtansine (T-DM1) was achieved by the proteomic method. Subsequently, a semiquantitative method for conjugated peptides was established in liquid chromatography-hybrid linear ion trap triple quadrupole mass spectrometry (LC-QTRAP-MS/MS) based on the qualitative information. The pretreatment method of the serum sample was optimized to reduce matrix interference. The method was then validated and applied to evaluate the stability of the conjugation sites on T-DM1. The results highlighted differences in stability among the different conjugation sites on T-DM1. This is the first study to assess the stability of different conjugation sites on the ADC in serum, which will be helpful for the design and screening of ADCs in the early stages of development.

B-155 Analysis of Monoclonal Antibodies Using a Quantification LC-MS/MS Kit - Spotlight on Infliximab

Abstract Background The use of immunoassays for measuring mAbs is well established but has some limitations, including poor performance, lack of standardization, a high cost when processing a limited number of samples, limited dynamic range, and the potential for cross-reactivity. Using LC-MS/MS associated with the ready-to-use commercial mAbXmise Kit is a simple way to implement mAbs measurement for infliximab, providing high analytical performance, ease of use, and flexibility. Methods The Promise Proteomics Inflammation mAbXmise Kit contains all the calibrators, QCs, internal standard and sample preparation consumables to run the LC-MS/MS method for infliximab. Briefly, 20µL samples are dispensed into the mAbXmise plates containing lyophilized stable labelled infliximab. Samples are transferred to the PuriXmise plate to perform the immunocapture of infliximab and allow washing of the samples. Samples are eluted into a collection plate, evaporated to dryness, resuspended, and the protease (CutXmise) is added to the sample to digest infliximab overnight. The digestion is quenched, with the samples immediately ready for analysis. Using an ACQUITY™ UPLC™ I-Class PLUS FL System, samples were injected onto a Waters™ XSelect™ Premier HSS T3 Column, eluted using a water/acetonitrile/formic acid gradient profile and quantified with both a Waters Xevo™ TQ-XS and Xevo TQ-S micro Mass Spectrometer. Results The method was shown to be linear from 2 - 100 µg/mL. Analytical sensitivity at lowest calibrator of 2µg/mL provided S/N (PtP) ≥15:1 for all tryptic peptides on both mass spectrometers. Coefficients of variation (CV) at 4 and 25µg/mL QC concentrations were all ≤ 10.0% (n = 5). The relative concentrations of the tryptic peptides were compared across 29 anonymized samples and good agreement was observed for GLE, SAV, DIL and ASA peptides. Conclusions We have demonstrated a clinical research method for quantifying Infliximab in plasma using a commercially available kit for sample preparation followed by LC-MS/MS analysis. The Promise Proteomics mAbXmise Kit aids in the day-to-day reproducibility of the immunocapture and tryptic digestion of IFX for targeted LC-MS/MS analysis with the correct peptide selection. Compared to a direct digest surrogate peptide workflow, the process used in the kit reduces matrix interference, improves analytical sensitivity, and enables the use of lower sample volumes. The method can be run on both the Xevo TQ-XS and Xevo TQ-S micro Mass Spectrometers which provide the dynamic range to quantify IFX across the expected range, and the selectivity and analytical sensitivity to obtain low-level quantification of the IFX surrogate peptide in plasma samples. The data presented combines the use of a kit dedicated to the preparation of samples and the use of liquid chromatography and mass spectrometry instrumentation to perform the quantitative analyses. The mAbXmise Kit described has not been cleared by any regulatory entity for diagnostic purposes outside of Europe. Analytical performance depends on the instrument characteristics and its settings. The end user is responsible for completion of the method development and validation. Proteomics mAbXmise Kits are not available for sale in all countries. For Research Use Only. Not for use in diagnostic procedures.

Taylor-Aris Dispersion-Assisted Mass Spectrometry for the Analysis of Native Proteins.

As has recently been shown, Taylor-Aris dispersion-assisted mass spectrometry (TADA-MS) can offer direct injection MS determinations in fields where the targets of the analyses are large molecules present in a matrix that would otherwise cause serious interferences. In the present study, we demonstrated the exceptional utility of TADA-MS in native protein analysis: (i) a dramatic improvement in detection sensitivity was found due to its ability to strongly reduce matrix interferences, (ii) more "native-like" conditions can be used during analyses, (iii) the direct injection of non-MS-compatible matrices is allowed into MS, and (iv) a considerable simplification and economization of the workflow is ensured. We investigated the behavior of different types of proteins and protein complexes present under native conditions, demonstrating the unambiguous benefits and simplicity of the method.

A configuration for cooling assisted organic solvent coated thin film microextraction after dispersive liquid-liquid microextraction method: A microextraction method for ultra-trace analyzing of volatile sample

A combination of the dispersive liquid-liquid microextraction (DLLME) method based on the total vaporization procedure and cooling-assisted organic solvent-coated thin film microextraction (TFME) was applied for extracting chlorpyrifos (as the model compound). Based on the high thermal conductivity, a nickel foam thin film with the dimensions of 5.0 mm × 5.0 mm was used as a substrate for holding the organic solvent. Supporting thin film by organic solvent increases the thickness and contact area of the film relative to TFME or single drop microextraction (SDME) alone, resulting in a dramatic increase in the extraction efficiency. To protect the organic solvent and enhance the analyte distribution coefficient between the film and the vapor phase, a cooling system was applied. The proposed design was effective due to condensing the target analyte only on the uniform cooled thin film and not on the other regions in the extraction chamber. A corona discharge ionization source-ion mobility spectrometer was employed to identify the analyte. After optimizing the effective parameters, the limits of quantification (S/N = 10) and detection (S/N = 3) were calculated 0.1 and 0.03 μg L−1, respectively, and the dynamic range was measured between 0.1 and 7.0 μg L−1, with a determination coefficient of 0.9997. For three concentration levels of 0.1, 3.0, and 7.0 μg L−1, the relative standard deviations (n = 3) as the repeatability index were to be 6 %, 5 %, and 4 % for intra-day and 9 %, 6 %, and 5 % for inter-day, respectively. The enrichment factor was also calculated to be 3630 for the analyte concentration of 1.0 μg L−1. Well water, potato, and agricultural wastewater were analyzed as the real samples and the relative recovery values were measured between 92 % and 99 %. The accuracy of the proposed technique was validated by the European Standards EN 12393 method. In this approach, two steps of analyte extraction (DLLME and TFME) were used consecutively, resulting in better preconcentration and reduced matrix interference during cleaning-up.

Rapid Separation and Detection of Drugs in Complex Biological Matrix Using TD-CDI Mass Spectrometer.

The drug detection technology plays a pivotal role in the domains of pharmaceutical regulation and law enforcement. In this study, we introduce a method that combines thermal desorption corona discharge ionization (TD-CDI) with mass spectrometry for efficient drug detection. The TD-CDI module, characterized by its compact and simple design, enables the separation of analytes within seconds and real-time presentation of one or two analyte peaks on the mass spectrum most of the time, which reduces matrix interference and improves detection performance. Through experimental investigation, we studied the characteristics of TD-CDI for analyte separation and detection, even with the same mass number, and optimized the TD-CDI approach. TD-CDI-MS was employed for the rapid detection of drugs in various traditional medicine, food products, and human samples. Additionally, by utilizing TD-CDI for segmented hair direct analysis, it becomes possible to trace the drug usage cycle of individuals. This underscores the feasibility of the proposed analytical method within the realm of drug detection.

An antifouling electrochemical aptasensor based on a Y-shaped peptide for tetracycline detection in milk

Nonspecific adsorption of non-target components (especially proteins) in food matrix on sensing surfaces deteriorates accuracy and sensitivity of electrochemical sensors, which is a key challenge for food safety sensing. Therefore, electrochemical sensors with antifouling capability of high-protein food matrices are highly desired. In this paper, an efficient and simple antifouling electrochemical aptasensor for tetracycline (TC) analysis was constructed based on a self-designed Y-shaped peptide [CPPPPEK-(RSERSERSE)2] consisting of cysteine as the anchoring segment, polyproline as the supporting segment, and -EK-(RSERSERSE)2 as antifouling branches. Hydrophilic and electrically neutral amino acid sequence and Y-shaped space structure of the peptide endow the sensing surface with good antifouling performance in protein solutions and diluted milk. Under optimized experiment conditions, the proposed aptasensor can detect TC with a wide linear range (0.01–100 ng mL−1) and a limit of detection of 5.3 pg mL−1 (S/N = 3). The spiked recovery experiments confirmed high accuracy of the aptasensor in diluted milk without other pretreatments (recoveries: 90.96%–95.86%). This strategy offers a valid way to reduce matrix interference, showing a promise to be extended to other sensing systems for different targets.

DNA-functionalized MOF fluorescent probes for the enzyme-free and pretreatment-free detection of MicroRNA in serum

MicroRNA (miRNA) is a promising biomarker that plays an important role in various biomedical applications, especially in cancer diagnosis. However, the current miRNA detection technology has inherent limitations such as complex operation, expensive testing cost and excessive detection time. In this study, a dual signal amplification biosensor based on DNA-functionalized metal–organic frameworks (MOFs) fluorescent probes, MFPBiosensor, was established for the enzyme-free and pretreatment-free detection of the colon cancer (CC) marker miR-23a. DNA-functionalized MOFs NH2-MIL-53(Al) (DNA@MOFs) were synthesized as fluorescent probes with specific recognition functions. A single DNA@MOF carries a large number of fluorescent ligands 2-aminoterephthalic acid (NH2–H2BDC), which can generate strong fluorescence signals after alkaline hydrolysis. Combined with catalyzed hairpin assembly (CHA), an efficient isothermal amplification technique, the dual signal enhancement strategy reduced matrix interference and sensitized the signal response. The established MFPBiosensor successfully detected extremely low levels of miRNA in complex biological samples with acceptable sensitivity and specificity. With a single detection cost of $0.583 and a test time of 50 min, the excellent inexpensive and rapid advantage of the MFPBiosensor is highlighted. More importantly, the subtle design enables the MFPBiosensor to achieve convenient batch detection, where miRNA in serum can be directly detected without any pretreatment process or enzyme. In conclusion, MFPBiosensor is a promising biosensor with substantial potential for commercial miRNA detection and clinical diagnostic applications of CC.

PEI-Mediated Assembly of Fe3O4 onto SiO2-Encapsulated CsPbBr3 for Highly Sensitive Fluorescent Lateral Flow Immunoassay.

The conventional lateral flow immunoassay (LFIA) method using colloidal gold nanoparticles (Au NPs) as labeling agents faces two inherent limitations, including restricted sensitivity and poor quantitative capability, which impede early viral infection detection. Herein, we designed and synthesized CsPbBr3 perovskite quantum dot-based composite nanoparticles, CsPbBr3@SiO2@Fe3O4 (CSF), which integrated fluorescence detection and magnetic enrichment properties into LFIA technology and achieved rapid, sensitive, and convenient quantitative detection of the SARS-CoV-2 virus N protein. In this study, CsPbBr3 served as a high-quantum-yield fluorescent signaling probe, while SiO2 significantly enhanced the stability and biomodifiability of CsPbBr3. Importantly, the SiO2 shell shows relatively low absorption or scattering toward fluorescence, maintaining a quantum yield of up to 74.4% in CsPbBr3@SiO2. Assembly of Fe3O4 nanoparticles mediated by PEI further enhanced the method's sensitivity and reduced matrix interference through magnetic enrichment. Consequently, the method achieved a fluorescent detection range of 1 × 102 to 5 × 106 pg·mL-1 after magnetic enrichment, with a limit of detection (LOD) of 58.8 pg·mL-1, representing a 13.3-fold improvement compared to nonenriched samples (7.58 × 102 pg·mL-1) and a 2-orders-of-magnitude improvement over commercial colloidal gold kits. Furthermore, the method exhibited 80% positive and 100% negative detection rates in clinical samples. This approach holds promise for on-site diagnosis, home-based quantitative tests, and disease procession evaluation.

Preparative agarose gel electrophoresis for reducing matrix interferences of organoid cell medium prior to LC-MS analysis of insulin

Organoids are 3D cell cultures with microanatomies mimicking aspects of real organs, useful for e.g. animal-free studies of development, disease, and drug discovery. The cell medium of organoid models of Langerhans islets, regulating blood glucose levels by insulin secretion, can be analyzed by liquid chromatography-mass spectrometry (LC-MS). However, organoid medium complexity is a major challenge, as matrix interferences can reduce sensitivity and selectivity, even with optimized LC-MS conditions. By applying preparative agarose gel electrophoresis-electrodialysis (PGE-ED), we were able to decrease the cell medium background signal, allowing for reduced interferences affecting LC-MS analysis of human insulin.

Low Parts Per Trillion Detection of Iodinated Disinfection Byproducts in Drinking Water and Urine using Vacuum-Assisted Sorbent Extraction and GC-MS/MS.

Disinfection byproducts (DBPs) are ubiquitous environmental contaminants, which are present in virtually all drinking water and linked to detrimental health effects. Iodinated-DBPs are more cytotoxic and genotoxic than chloro- and bromo-DBPs and are formed during disinfection of iodide-containing source water. Liquid-liquid extraction (LLE) paired with gas chromatography (GC)-mass spectrometry (MS) has been the method of choice in the study of low molecular weight iodinated-DBPs; however, this method is laborious and time-consuming and struggles with complex matrices. We developed an environmentally friendly method utilizing headspace solid phase extraction with the application of vacuum to measure six iodinated-trihalomethanes (I-THMs) in drinking water and urine. Vacuum-assisted sorbent extraction (VASE) has the ability to exhaustively and rapidly extract volatile and semivolatile compounds from liquid matrices without the use of solvent. Using VASE with GC-MS/MS provides improved analyte recovery and reduced matrix interference compared to LLE. Additionally, VASE enables extraction of 30 samples simultaneously with minimal sample handling and improved method reproducibility. Using VASE with GC-MS/MS, we achieved quantification limits of 3-4 ng/L. This technique was demonstrated on drinking water from four cities, where five I-THMs were quantified at levels 10-33 times below comparable LLE methods with 10 times lower volumes of sample (10 mL vs 100 mL).

Enhancing peroxidase-like activity of AuNPs through headspace reaction: A signal amplification strategy for colorimetric and fluorescent sensing of trace Hg2+

BackgroundRecently, headspace single-drop microextraction (HS-SDME) has attracted some attention for developing sensitive and selective colorimetric assays due to its excellent capability to reduce matrix interference and enrich analytes. However, the single droplet limits direct visual observation of color change and its quantitative measurement suffers from reduced optical path length. Therefore, amplifying the detection signals in both volume and intensity is an important and challenging task for improving the sensitivity, stability, and accuracy of such colorimetric analysis. ResultsIn this study, a "headspace-nanoenzyme" (HS-NE) strategy was proposed that successfully addressed these challenges and enabled the colorimetric and fluorescent dual-mode detection of trace Hg2+. Atomic Hg0, generated via chemical vapor generation (CVG), underwent headspace reaction with AuNPs droplet to form Au@HgNPs, thus catalyzing the oxidation of o-phenylenediamine (OPD) in the presence of H2O2. The absorbance and fluorescence intensity of oxidized OPD were proportion to the concentration of Hg2+ in the sample solution. Due to the greatly enhanced peroxidase-like activity by Au@HgNPs, the limit of detection was as low as 0.98 nM and 0.21 nM for the colorimetric and fluorescent modes, respectively. The applicability of this assay was further demonstrated with determination of Hg2+ in real environmental and biological samples. Moreover, a convenient and cost-effective paper-based sensing platform was fabricated for rapid on-site detection of Hg2+. Significance and noveltyThis novel HS-NE strategy combines HS-SDME and nanoenzyme-based sensing to achieve dual effects of eliminating matrix interference and amplifying the measurement signal, resulting in improved accuracy, enhanced stability, high sensitivity, and exceptional selectivity, with great potential for on-site determination of trace Hg2+.

Engineering an Antifouling Electrochemical Sensing Platform Based on an All-in-One Peptide and a Hierarchical β-Bi2O3-Au Microsphere for Vancomycin Detection in Food.

Challenges associated with interference aroused by nonspecific attachment of foulants in the food matrix steered the development of sensor surfaces capable of antifouling capacity. In this study, an antifouling electrochemical sensing platform based on an all-in-one peptide (DOPA3-PPPPEKDQDKKaa) with anchoring, antifouling, and recognition functions and a hierarchical β-Bi2O3-Au microsphere was proposed for vancomycin (Van) detection in food. The β-Bi2O3-Au with excellent conductivity was synthesized and introduced as an electrode modifier to accelerate electron transfer on the sensor surface, enhancing sensing response. Mussel organism-inspired oligo DOPA, that is, oligo 3,4-dihydroxyphenylalanine, was employed as the anchoring segment of the all-in-one peptide, which is versatile for surfaces with different materials. PPPPEKDQDK and Kaa as antifouling and recognition segments confer abilities to resist nonspecific adsorption of foulants and specifically bind Van on the sensor surface, respectively. Notably, the excellent antifouling performance of the proposed sensor has been verified in protein solutions, carbohydrate solutions, and even in diluted milk and honey. Molecular dynamics simulation was carried out to explain the antifouling mechanism of the all-in-one peptide. The proposed sensor can detect Van sensitively and selectively with a relatively wide linear range (0.1-100 ng mL-1) and a limit of detection (LOD) as low as 0.038 ng mL-1 and support the quantification of Van in milk, milk powder, and honey samples with satisfactory recoveries within 105.3-110.8%. This antifouling electrochemical sensing platform offers a feasible strategy to reduce matrix interference, which guarantees the accurate detection of Van in food samples.

Inline phase transition trapping-selective supercritical fluid extraction-supercritical fluid chromatography: A green and efficient integrated method for determining prohibited substances in cosmetics

BackgroundDeveloping an environmentally friendly and efficient integrated analytical approach is a cutting-edge topic in current analytical science. Due to the unique properties of supercritical carbon dioxide (sc-CO2), online supercritical fluid extraction-supercritical fluid chromatography (SFE-SFC) is developing rapidly and has been widely applied in many fields. However, it still faces several challenges such as peak broadening and matrix interference. In order to solve the problems, we developed an inline phase transition trapping-selective supercritical fluid extraction-supercritical fluid chromatography (PTT-SSFE-SFC)-tandem mass spectrometry (MS/MS) method in this study. ResultsThis method integrated extraction, purification, separation, and detection, which was applied to determine 114 prohibited substances in cosmetics within 33 min, covering ten categories. The PTT strategy trapped the extracts on the head of the column by transforming CO2 from a supercritical state to a gaseous state, preventing peak spreading and improving sensitivity. Several adsorbents were tested when analyzing aqueous samples to reduce matrix interference and absorb water. Compared with conventional online SFE-SFC, this method improved the matrix effects of 93 and 87 target substances in the toner and mask matrix, respectively. Because the integrated method reduced sample loss, it achieved high sensitivity with LODs ranging from 0.00104 μg L−1 to 3.09 μg L−1. Furthermore, compared with other reported green methods, the inline method showed advantages in automation, efficiency, sample amount, and waste volume. Significance and noveltyWith the introduction of the PTT strategy and the adsorbent, the system obtained good peak shapes, high sensitivity, low matrix effect, and good recovery. Based on the results, inline PTT-SSFE-SFC-MS/MS as a green and efficient integrated method has great potential for analyzing low abundance and multiple categories of targets in complex samples.

LC-MS fingerprint and multi-indicator components analysis of classical formula Gualou Xiebai Banxia Decoction

This study developed an optimal pre-processing technique for the reference substance of the classic formula Gualou Xiebai Banxia Decoction(GXBD) and established a comprehensive quality control method for GXBD reference substance to provide a reference for its overall quality evaluation. The authors prepared 15 batches of GXBD samples and innovatively used the extracted ion chromatogram under the base peak chromatogram mode to establish a liquid chromatography-mass spectrometry(LC-MS) fingerprint, identify characteristic peaks, and perform quantitative analysis of indicator components. The yield of the 15 batches of GXBD samples ranged from 50.28% to 76.20%. In the positive ion mode, 12 common characteristic peaks were detected in the LC-MS fingerprint, and the structures of five common peaks were identified by comparison with reference standards. The similarity between the fingerprint profiles of different batches of samples and the reference fingerprint profile ranged from 0.920 to 0.984. Finally, liquid chromatography-triple quadrupole mass spectrometry(LC-QQQ/MS) in multiple reaction monitoring(MRM) mode was used to determine the content of eight indicator components in GXBD, including loliolide, chrysoeriol, rutin, cucurbitacin D, macrostemonoside Ⅰ, 25S-timosaponin B Ⅱ, 25R-timosaponin B Ⅱ, and peptide proline-tryptophan-valine-proline-glycine(PWVPG). The method established in this study can reduce matrix interference in the compound, and it has good accuracy, stability, and practical value. It effectively reflects the quality attributes of GXBD samples and can be used for the comprehensive quality control of GXBD.

Fluorescence and Colorimetric Analysis of African Swine Fever Virus Based on the RPA-Assisted CRISPR/Cas12a Strategy.

It is well-established that different detection modes are necessary for corresponding applications, which can effectively reduce matrix interference and improve the detection accuracy. Here, we reported a magnetic separation method based on recombinase polymerase amplification (RPA)-assisted clustered regularly interspaced short palindromic repeats (CRISPR)/Cas12a for dual-mode analysis of African swine fever virus (ASFV) genes, including colorimetry and fluorescence. The ASFV gene was selected as the initial RPA template to generate the amplicon. The RPA amplicon was then recognized by CRISPR-associated RNA (crRNA), activating the trans-cleavage activity of Cas12a and leading to the nonspecific cleavage of ssDNA as well as a significant release of alkaline phosphatase (ALP) in the ALP-ssDNA modified magnetic bead. The released ALP can catalyze para-nitrophenyl phosphate to generate para-nitrophenol, resulting in substantial changes in absorbance and fluorescence, both of which can be used for detection with the naked eye. This strategy allows the sensitive detection of ASFV DNA, with a 20 copies/mL detection limit; no cross-reactivity with other viruses was observed. A good linear relationship was obtained in serum. In addition, this sensor displayed 100% specificity and sensitivity for clinical sample analysis. This method integrates the high sensitivity of fluorescence with easy readout of colorimetry and enables a simple, low-cost, and highly sensitive dual-mode detection of viral nucleic acid, thereby providing a broad prospect for the practical application in the diagnosis of virus infection.

Salting-Out Assisted Liquid-Liquid Extraction for UPLC-MS/MS Determination of Thyroxine and Steroid Hormones in Human Serum and Fish Plasma

Measuring the level of steroid and thyroxine hormones is key to understanding organism health conditions. Liquid chromatography coupled with tandem mass spectrometry has become the method of choice for such hormone analyses in clinical laboratories. Detection of hormones at low levels typically requires a time-consuming sample preparation, such as liquid-liquid extraction followed by solvent evaporation and re-solubilization of the sample extract. Instead, we applied salting-out assisted liquid-liquid extraction (SALLE) for the extraction of thyroxine, testosterone, cortisone, and cortisol from human serum and fish plasma samples. SALLE allowed direct injection of sample extracts. Sodium chloride and ammonium sulfate were evaluated as salting-out reagents together with four different organic solvents. High extraction recovery and reduced matrix interference were achieved by using ammonium sulfate together with 10% methanol in acetonitrile. Limits of quantification were in the range of 0.1–0.2 ng/mL and signal responses were linear (R2 > 0.997) up to at least 100 ng/mL for all hormones. The method was applied for hormone measurements in fish plasma. In conclusion, SALLE combines the simplicity of crude protein precipitation with the high analyte enrichment of a liquid-liquid extraction. Here we have presented it as a novel sample preparation method for clinical laboratories where mass spectrometry is utilized in the field of endocrinology.

On-site Simultaneous Determination of Neonicotinoids, Carbamates, and Phenyl Pyrazole Insecticides in Vegetables by QuEChERS Extraction on Nitrogen and Sulfur co-doped Carbon Dots and Portable Mass Spectrometry

In food safety monitoring, on-site and simultaneous detection of a variety of insecticides with different concentrations in the same matrix is necessary. However, the task remains challenging. In this study, a novel nitrogen and sulfur co-doped carbon dot (N, S-CD) was synthesized and used as a QuEChERS clean-up reagent to reduce matrix interferences in the determination of insecticides in vegetables. In addition, a portable mass spectrometer (µ-MS) was employed, without chromatography separation, to directly determine neonicotinoids, carbamates, and benzopyrazole insecticides (with acetamiprid, imidacloprid, thiamethoxam, fipronil, and carbofuran as models) in the pretreated samples. The N,S-CD µ-MS method exhibited effective clean-up performance with satisfactory matrix effects between −15.2% and 15.7%. The recoveries of spiked vegetable samples ranged from 82.2% to 109.7% for the five target insecticides, and the relative standard deviations (RSDs) ranged from 3.8% to 16.5%. The linear ranges were from 2.0 to 5.0 ng/g, with low detection limits (LOD) from 0.5 to 1.0 ng/g. Moreover, the total pretreatment and detection time was within 20 min. Thus, the incorporation of N,S-CD with QuEChERS extraction, together with the portable µ-MS system, could be a promising and feasible strategy for on-site, rapid, and simultaneous detection of various insecticides in vegetables.

Development of a polyurethane-coated thin film solid phase microextraction device for multi-residue monitoring of pesticides in fruit and tea beverages.

A novel solid-phase microextraction device coated with an efficient and cheap thin film of polyurethane was developed for trace determination of 13 widely used pesticides in fruit and tea beverages. A round-shaped polyurethane film covering the bottom of a glass vial was fabricated as the sorbent to exhibit a superior capacity for preconcentrating target compounds and reducing matrix interferences. After optimization of the key parameters including the film type, extraction time, solution pH, ionic strength, desorption solvent, and conditions, this device allowed an efficient adsorption-desorption cycle for the pesticides accomplished in one vial. Coupled with gas chromatography-electron capture detection, the polyurethane-coated thin film microextraction method was successfully established and applied for the analysis of real fruit and tea drinks, showing low limits of detection (0.001-0.015μg/L), wide linear ranges (1.0-500.0μg/L, r2 >0.9931), good relative recoveries (77.2%-106.3%) and negligible matrix effects (86.1%-107.5%) for the target pesticides. The proposed approach revealed strong potential of extending its application by flexibly modifying the type or size of the coating film. This study provides insights into the enrichment of contaminants from complex samples using inexpensive and reusable microextraction devices that can limit the environmental and health impact of the sample preparation protocol.

Determination of K, Na, and Mg in Brine by Liquid Cathode Glow Discharge—Optical Emission Spectrometry (LCGD-OES) with Interference Suppression

The determination of K, Na, and Mg in brine is important for its effective utilization. Liquid cathode glow discharge—optical emission spectrometry (LCGD-OES) is a successful approach for the determination of these elements in brine. However, matrix interferences reduce the accuracy using a standard curve. Here a correction method based upon the mutual interferences between K, Na, and Mg is reported to improve the accuracy of brine analysis. To verify the performance, LCGD-OES was employed to analyze four samples using the optimized operating voltage and sample flow rate. The results showed that the relative errors of the concentrations of K and Na in the brine were from 1.79% to 8.65% and 3.88% to 6.49% compared to inductively coupled plasma optical—emission spectrometry (ICP-OES). The reported correction method significantly reduced matrix interferences for the determination of K and Na. Additionally, Mg in brine was determined using Al as the internal standard.