This paper describes the production and characterizations of reduced graphene oxide-zinc oxide (rGO-ZnO) nanocomposites fabricated via hydrothermal approach. Firstly, rGO powder was produced via modified Hummers' method and ZnO nanoparticles using chemical co-precipitation. The nanocomposites structural, microstructural and optical characteristics were determined using X-ray diffraction (XRD), infrared spectroscopy (FTIR), Raman spectroscopy and Ultraviolet–visible (UV–Vis) spectroscopy. The findings demonstrated the effective synthesis of rGO-ZnO nanocomposites with evenly distributed ZnO nanoparticles on the surface of reduced graphene oxide sheets. rGO-ZnO nanocomposites with different concentrations ratio rGO:ZnO in composition of 10:0. 7.5:2.5, 5:5, 2.5:7.5, and 0:10 (weight percentage) were formed. An average crystallite size (Davg) was observed to be decreasing with an increasing concentration of ZnO in to rGO from ∼13.96 nm to ∼21.36 nm which is supported by Williamson-Hall (W–H) extrapolation. The FTIR spectra showed the functional groups belongs to intrinsic and extrinsic vibrations v1 and v2 at ∼410 cm−1 for rGO and metal‒oxygen (Zn–O) stretching vibrations ∼400 cm−1 to ∼500 cm−1 for rGO-ZnO nanocomposites. On rising ZnO content in the rGO-ZnO nanocomposites, a slight variation in band positions was caused due to the microstructural changes. Raman spectroscopy revealed certain peaks (D, G, for rGO; E2, A1 (TO), LO for ZnO) in various compositions. The research demonstrates how the composition of a material affects its vibrational characteristics, which is crucial for customizing the material for certain applications. The optical energy band gap of rGO-ZnO 75 % was recorded to be ∼4.94 eV, and highest for rGO with 5.44 eV. The optical energy band gap decreased from 5.44 eV to 4.94 eV. This decrease can be attributed to the influence of the smaller crystallite size and fluctuations in microstructural properties caused by the rGO-ZnO nanocomposite. The obtained rGO-ZnO nanocomposites can be utilized for opto-electronic device applications.