Reduced Density Gradient Analysis Research Articles

Fine-tuning the photophysical properties of Imidazo[1,2-a]pyridine-based dyes by the change in substituent and solvent media: DFT and TD-DFT studies

In the present work, photophysical properties of the nine excited-state intramolecular proton transfer (ESIPT) active 2-(2 -hydroxyphenyl)imidazo[1,2-a]pyridine (HPIP)-based dyes A1-A9 (X= H, Me, F, Cl, OMe, OH, CN, NO2 and CF3) were investigated at PBE0/6-31++G(d,p) and M06-2X/6-31++G(d,p) levels of theory in the gas phase and solvent media. The structural parameters, relative energies, vibrational spectra, photophysical properties, potential energy curves, natural bond orbital (NBO) charges, hole and electron isosurfaces, electron density properties and reduced density gradient (RDG) spikes were computed. The H-bonding is strengthened at the S1 state by comparing infrared vibrational spectra, the relevant bond length and bond angle, electron density properties and RDG analysis. The results revealed that ESIPT in the A1-A7 and A9 in the gas phase is a barrier-less process, while there is an energy barrier for the A8 (X=NO2). In polar solvents, it is predicted that the ESIPT process only in A5 and A6 is a barrier-less process. The A2, A4 and A5 exhibited the greatest redshift in the keto fluorescence emission in tetrahydrofuran solvents. The significant Stokes shift observed in the S1-K emission of certain dyes makes these molecules highly appealing for various applications such as chemosensors, fluorescent probes, laser dyes and optoelectronic devices.

Ab Initio Study of the Graphyne-like γ-SiC Nanoflake for Toxic Gas-Sensing Applications.

This study focuses on the geometrical, electronic, and optical properties of the γ-graphyne-like novel γ-SiC nanoflake of the γ-silicon carbide (SiC) monolayer using density functional theory calculations. γ-SiC was revealed to be a stable semiconducting nanoflake confirmed by a negative cohesive energy, real vibrational frequencies, and a 1.749 eV energy gap. The adsorption of COCl2, HCN, PH3, AsH3, CNCl, and C2N2 toxic gases on the γ-SiC nanoflake is also studied, which revealed an attractive gas-nanoflake interaction with the adsorption energy ranging from -0.21 to -0.38 eV. The adsorption results in a significant charge transfer between gas-adsorbent complexes. A significant variation in the energy gap and electrical conductivity was observed due to gas adsorption. γ-SiC showed maximum sensitivity at room temperature for CNCl gas. The entire process of adsorption is exothermic and thermodynamically stable. γ-SiC showed a high absorption coefficient over 104 orders with a significant variation in the absorption peak intensity and blue peak shifting. According to the quantum theory and reduced density gradient analysis, all of the gases are physisorbed on the γ-SiC nanoflake due to van der Waals interactions. The obtained results signify the usability of γ-SiC as a potential toxic gas sensor.

Tandem Four-Component Reaction to Access Fused Polycycles Exhibiting Aggregation-Enhanced Through-Space Charge Transfer Emission.

Rapid construction of new fluorescence emitters is essential in advancing synthetic luminescent materials. This study illustrated a piperidine-promoted reaction of chiral dialdehyde with benzoylacetonitrile and malonitrile, leading to the formation of the 6/6/7 fused cyclic product in good yield. The proposed reaction mechanism involves a dual condensation/cyclization process, achieving the formation of up to six bonds for fused polycycles. The single crystal structure analysis revealed that the fused cyclic skeleton contains face-to-face naphthyl and cyanoalkenyl motifs, which act as the electronic donor and acceptor, respectively, potentially resulting in through-space charge transfer (TSCT) emission. While the TSCT emissions were weak in solution, a notable increase in luminescence intensity was observed upon aggregation, indicating bright fluorescent light. A series of theoretical analyses further supported the possibility of spatial electronic communication based on frontier molecular orbitals, the distance of charge transfer, and reduced density gradient analysis. This work not only provides guidance for the one-step synthesis of complex polycycles, but also offers valuable insights into the design of aggregation-enhanced TSCT emission materials.

Investigating the potential of graphene and nitrogen carbide nanosheets as efficient sensors for drug detection through theoretical analysis

Due to the advancements in nanoscience, there has been a steady rise in the utilization of low-dimensional nanomaterials as efficient sensors in clinical practice. This research undertook a theoretical investigation aimed at proposing a prospective sensor for the allopurinol (APN) drug. The study focused on examining the fundamental interactions between the drug molecule and two nanosheets, namely graphene (GNS) and nitrogen carbide (NC3NS), employing DFT B3LYP/6-31G(d,p) in both aqueous and gaseous media. A range of adsorption energy (Eads) values for APN-NC3NS conjugated structures (CSs) was observed, ranging between −31 kcal mol−1 and −20 kcal mol−1, indicating weak chemisorption. This observed interaction can be attributed to the transfer of charge from APN to NC3NS, a phenomenon verified and characterized using reduced density gradient analysis, natural bond analysis, and the quantum theory of atoms in molecules. The APN-NC3NS conjugated structure exhibited the most significant reductions in the energy gap (Eg), with a decrease of 42.37 % in the gas phase and 30.11 % in water. This observation was further supported by frontier molecular orbital (FMO) and molecular electrostatic potential (MEP) analyses. Additionally, the NC3NS nanosheet’s advantageous ability to quickly recover (within the millisecond range) positions it as a promising candidate for the efficient detection of APN molecules.

Multifaceted investigation of Sulfamerazine: Insights from computational methods, experimental techniques, and molecular simulations

The powerful sulfonamide antibiotic Sulfamerazine has been the subject of in-depth study to clarify its complex molecular interactions. In order to understand Sulfamerazine's pharmacological behaviour and interactions with biological components, this comprehensive study uses computational tools such as Density Functional Theory (DFT) calculations, spectroscopic analyses, and molecular docking simulations. Exploitation B3LYP/6-311++G(d,p) basis set, DFT simulations have provided important new understandings of the structure, vibrational properties, and binding mechanisms of this system. Vibrational assignments have been conducted by analyzing individual vibrational modes and comparing them to experimental data. The molecule's weak interactions have been identified grounded on electron density using Reduced Density Gradient Analysis. Fukui and MEP plot analyses have been employed to pinpoint the molecule's electrophilic and nucleophilic sites. Frontier molecular orbital analysis supported the observation of charge transfer within the molecule. Sulfamerazine is a viable option for further pharmaceutical development, as shown by drug-likeness and ADME (absorption, distribution, metabolism, and excretion) studies. In docking analysis, the inhibitor 6qzh stood out as particularly potent, capable of forming up to three hydrogen bonds, resulting in a binding energy of -8.2 kcal/mol. Molecular dynamics simulations have also shed light on the stability, solubility, and possible interactions of Sulfamerazine in diverse settings. This all-encompassing strategy promises to increase our understanding of the mechanism of action of Sulfamerazine, creating new opportunities for the logical development of more potent pharmaceuticals.

Cooperativity between Intermolecular Hydrogen and Carbon Bonds in ZY···CH3CN/CH3NC···HX Trimers (ZY = H2O, H2S, HF, HCl, HBr, NH3, and H2CO; HX = HF, HCl, and HBr).

Hydrogen-bonding and carbon-bonding interactions are widespread in nature. We studied the cooperativity between these interactions in 42 trimeric complexes ZY···CH3CN/CH3NC···HX, where ZY molecules are H2O, H2S, HF, HCl, HBr, NH3, and H2CO, and HX molecules are HF, HCl, and HBr. Acetonitrile (CH3CN) and isoacetonitrile (CH3NC) act as hydrogen bond acceptors as well as carbon bond donors in these trimers. Various theoretical methods, such as electronic structure calculations, quantum theory of atoms in molecule (QTAIM), natural bond orbital (NBO), and reduced density gradient analysis, are employed to study these trimers, and the results are compared with the corresponding ZY···CH3CN/CH3NC and CH3CN/CH3NC···HX dimers. Electronic structure calculations are performed at the second-order Mo̷ller-Plesset perturbation theory using the 6-311++G(2d,2p) basis set. We show that both the interactions act synergistically in these trimers leading to an increase in their bond strength as compared to the strength in the individual dimers. The cooperative energies for these trimers are in the range of 0.69 to 3.22 kJ/mol. It is seen that the carbon bonds benefit more from the cooperativity than the hydrogen bonds. The trends of cooperativity and correlations of interaction energies and cooperative energies with relevant QTAIM and NBO parameters are reported.

Insight into the interaction of host-guest structures for pyrrole-based metal compounds and C70.

This study focuses on the recognition and isolation of fullerenes, which are crucial for further exploration of their physical and chemical properties. Our goal is to investigate the potential recognition of the D5h-C70 fullerene using crown-shaped metal compositions through density functional theory calculations. We assess the effectiveness of fullerene C70 recognition by studying the binding energy. Additionally, various analyses were conducted, including natural bond order charge analysis and reduced density gradient analysis, to understand the interaction mechanism between the host and guest molecules. These investigations provide valuable insights into the nature of the interaction and the stability of the host-guest system. To facilitate the release of the fullerene guest molecule, the vis-NIR spectra were simulated for the host-guest structures. This analysis offers guidance on the specific wavelengths that can be utilized to release the fullerene guest from the host-guest structures. Overall, this work proposes a new strategy for the effective recognition of various fullerene molecules and their subsequent release from host-guest systems. These findings could potentially be applied in assemblies involving fullerenes, advancing their practical applications.

Exploring the influence of bis-phosphine ligands on lanthanide complexes: A DFT study

This study employs density functional theory (DFT) calculation to investigate the bis-phosphine ligands interaction with lanthanide ions (La3+, Nd3+, Eu3+, Er3+ and Lu3+). Two distinct bridging modes are explored between two phosphine ligands: pyridine and methylene functional groups. The aim is to understand the structural, thermochemical, spectroscopic, and orbital properties of the bis-phosphine-Ln3+ complexes and compare the effects of different bridging modes. It is observed that bis-phosphine ligands form the most stable complexes with Er3+ and the least stable complexes with La3+, as evidenced by interaction energies, Gibb’s free energies and electrophilicity index values. Pyridine-bridged ligands form more stable complexes than methylene-bridged ligands, which is consistent with charge population analysis. Reduced density gradient analysis indicates the presence of strong hydrogen bond-like interactions between lanthanide ions and oxygen/nitrogen atoms of bis-phosphine complexes. Infrared spectra simulations reveal that Er3+ forms stronger bonds with oxygen atoms of bis-phosphine ligands than other lanthanide ions.

Density functional study of the electronic, bonding, elastic and infrared properties of tetragonal H2O2 ice

Hydrogen peroxide is one of the most important commercially used oxidant and exists widely in the environment. It crystallizes in a tetragonal phase via hydrogen bond at around −0.89 °C. However, many of its fundamental properties are still not well studied. To investigate systems containing hydrogen bond, van der Waals correction must be considered. In this work, we tested a series of local and non-local van der Waals corrections within the frame of density functional theory. The optPBE-vdW and the vdW-DF-CX functionals are found to be the best ones based on the relaxed lattice parameters. Then the electronic, bonding, elastic, infrared, piezoelectric and dielectric properties are studied and discussed. The results reveal that tetragonal H2O2 is an indirect band gap insulator. Bond critical point analysis, reduced density gradient analysis and crystal orbital Hamilton population analysis uncover that the H-O···H bonds are moderate hydrogen bonds, which contribute most to the formation of the crystal. The interactions between the O atoms of neighbouring H2O2 molecules also have a bit contribution. Elastic stability of tetragonal H2O2 is confirmed and its elastic anisotropy is illustrated by directional bulk and shear moduli. The vibrational modes at the Brillouin zone center are assigned, and their frequencies and eigen-displacements are calculated. Additionally, its infrared spectrum is simulated. Its Born effective charges, piezoelectric and dielectric coefficients are also obtained and discussed.

Exploring Pyrimidine-Based azo Dyes: Vibrational spectroscopic Assignments, TD-DFT Investigation, chemical Reactivity, HOMO-LUMO, ELF, LOL and NCI-RDG analysis

Theoretical computations of pyrimidine-based azo dyes were performed by the DFT approach using the B3LYP/6 − 31G(d,p) basis set. The molecules were optimized based on the same basis set by calculating the minimum energy. FMOs, DOS and GCRD were computed for kinetic stability and chemical reactivity of the selected compounds. The MEP surface was studied to locate nucleophilic and electrophilic attack zones. The energy gap was carefully studied for pyrimidine-based azo dyes. Vibrational spectroscopy was studied in the most prominent regions with respect to PED assignments. Similarly, the UV–Vis absorption technique was calculated using the TD-DFT approach in different solvent media. The electronic structure of each atom in a molecule was examined via the electron localization function (ELF) and localized orbital locator (LOL). Non-covalent interactions were explored using reduced density gradient analysis. The combination of experimental and theoretical data allowed us to correlate the structural modifications with the observed photophysical properties, facilitating the design of azo dyes with tailored characteristics. This work contributes to the fundamental understanding of azo dyes and offers a foundation for the development of new materials with enhanced photophysical and electronic properties.

Different mobile counter ion types of magnetic ion-exchange resin coupling with ozonation treatment of the organic matter, antibiotic resistance genes, and pathogens in secondary effluent

Advanced treatment and reuse of secondary effluents (SE) from wastewater treatment plants is considered an effective method of alleviating the conflict between water supply and demand. However, the effective removal of organic matter, antibiotic resistance genes (ARGs), and pathogens in SE is key to ensure the safety of reclaimed water. In this study, the effectiveness of three types of magnetic ion-exchange resins (R-X, where X refers to –OH, –HCO3, and -Cl) coupled with ozonation (R + O) in reducing different types of carbon, pathogens, intracellular and extracellular antibiotic resistance genes (iARGs and eARGs), and microbial communities in SE was investigated. The results indicated that R-Cl was the best pre-treatment resin for ozonation. R-Cl + O (8 mL/L R-Cl adsorption for 30 min, followed by 15 min of 8 mg/L ozonation) achieved removal efficiencies of 49.7 %, 86.6 %, 99.9 %, 87.1 %, and 99.9 % for dissolved organic carbon, UV254, ΣiARGs, ΣeARGs, and Σpathogens, respectively. Ozonation was more effective than resin adsorption in the removal of ARGs, and R-Cl + O had the lowest rebounding potential for iARGs and pathogens. In addition, R-OH had the lowest removal efficiency of organic matter, iARGs, and pathogens compared to other types of resins owing to the electrostatic repulsion mechanism. Molecular dynamics simulations and average reduced density gradient analysis revealed that the quaternary amine sites of the resin had a positive surface electrostatic potential, which could firmly adsorb double-stranded deoxyribonucleic acid by electrostatic action. Ozonation effectively reduced the risk of ARGs and pathogens in the effluent of resin. The R + O treatment reduced organic matter, ARGs, and pathogens more effectively than single treatment, despite the different anionic groups of the resin.

Synthesis, characterization, anti-lung cancer activity, and in-silico studies of some novel triazole-based analogues as Pellizzari products

In the present research work, a series of novel (Z)-5-(cyclohexylidenehydrazono)-2-aryl-3H,5H-thiazolo[3,4-b][1,2,4]triazole derivatives were synthesized by Pellizzari reaction of (Z)-3-amino-2-(cyclo hexylidenehydrazono)thiazolidin-4-one with different aromatic amides. All the synthesized products were obtained in a good to excellent yields, and their structures were established based on UV-Vis, FT-IR, 1H NMR, 13C NMR, and HRMS analysis. To validate the experimental findings, in-silico studies of one synthesized compound (11a) were done with the help of density functional theory (DFT) at B3LYP/6-311++G(d,p) level. Frontier molecular orbitals, molecular electrostatic potential, and Reduced density gradient analysis were performed to better understand the electronic properties, and reactivity. Results of NLO, ELF, LOL, DOS, AIM, and vector analysis were reported. All the newly synthesized benzimidazole compounds had a cytotoxic impact, in some cases much more potent than the reference medication. The cytotoxicity of all the synthesized compounds were assessed against A549 cell lines using the MTT assay. Among them, compounds 11d and 11e showed more potent cytotoxicity having the IC50 value ∼90 and ∼80 µM, respectively. The molecular docking studies revealed an excellent affinity for the active sites of the matching gene regulation-inhibitor complex (BDR4) protein. Additionally, the evaluation of ADMET parameters indicated good pharmacokinetic properties of all the investigated compounds.

1,2,3,4-Tetrafluorobiphenylene: A Prototype Janus-Headed Scaffold for Ambipolar Materials.

The title compound was synthesized by Ullmann cross-coupling in low yield as the first representative of [n]phenylene containing hydrocarbon and fluorocarbon rings. Stille/Suzuki-Miyaura cross-coupling reactions, as well as substitution of fluorine in suitable starting compounds, failed to give the same product. The geometric and electronic structures of the title compound were studied by X-ray diffraction, cyclic voltammetry and density functional theory calculations, together with Hirshfeld surface and reduced density gradient analyses. The crystal structure features head-to-tail π-stacking and other fluorine-related secondary bonding interactions. From the nucleus-independent chemical shifts descriptor, the four-membered ring of the title compound is antiaromatic, and the six-membered rings are aromatic. The Janus molecule is highly polarized; and the six-membered fluoro- and hydrocarbon rings are Lewis π-acidic and π-basic, respectively. The electrochemically-generated radical cation of the title compound is long-lived as characterized by electron paramagnetic resonance, whereas the radical anion is unstable in solution. The title compound reveals electrical properties of an insulator. On expanding its molecular scaffold towards partially fluorinated [n]phenylenes (n≥2), the properties presumably can be transformed into those of semiconductors. In this context, the title compound is suggested as a prototype scaffold for ambipolar materials for organic electronics and spintronics.

Superalkali nature of the Si9M5 (M = Li, Na, and K) Zintl clusters: a theoretical study on electronic structure and dynamic nonlinear optical properties.

Zintl clusters have attracted widespread attention because of their intriguing bonding and unusual physical properties. We explore the Si9 and Si9M5 (where M = Li, Na, and K) Zintl clusters using the density functional theory combined with other methods. The exothermic nature of the Si9M5 cluster formation is disclosed, and the interactions of alkali metals with pristine Si9 are shown to be noncovalent. The reduced density gradient analysis is performed, in which increased van der Waals interactions are observed with the enlargement of the size of alkali metals. The influence of the implicit solvent model is considered, where the hyperpolarizability (βo) in the solvent is found to be about 83 times larger than that in the gas phase for Si9K5. The frequency-dependent nonlinear optical (NLO) response for the dc-Kerr effect is observed up to 1.3 × 1011 au, indicating an excellent change in refractive index by an externally applied electric field. In addition, natural bonding orbitals obtained from the second-order perturbation analysis show the charge transfer with the donor-acceptor orbitals. Electron localization function and localized orbital locator analyses are also performed to better understand the bonding electrons in designed clusters. The studied Zintl clusters demonstrate the superalkali character in addition to their remarkable optical and nonlinear optical properties.

Dioxygen-halogen bonding exemplified by crystalline peroxosolvates of N,N'-bis(haloacetyl) bispidines.

The halogen bonding in molecular crystals and supramolecular assemblies has been widely investigated. Special attention is given to the molecular structures capable of simultaneously exhibiting different types of non-covalent interactions, including conventional hydrogen bonds and halogen bonds. This paper systematically analyzes crystalline peroxosolvates of bispidine-based bis-amide derivatives, containing haloacetic acid residues, namely previously reported 1,1'-(1,5-dimethyl-3,7-diazabicyclo[3.3.1]nonane-3,7-diyl)bis(2-iodooethanone) peroxosolvate C13H20I2N2O2·H2O2 (1) and four new crystalline compounds, 1,1'-(1,5-dimethyl-3,7-diazabicyclo[3.3.1]nonane-3,7-diyl)bis(2-bromoethanone) peroxosolvate C13H20Br2N2O2·H2O2 (2), 1,1'-(9-hydroperoxy-9-hydroxy-1,5-dimethyl-3,7-diazabicyclo[3.3.1]nonane-3,7-diyl)bis(2-iodoethanone) peroxosolvate C13H20I2N2O5·0.5H2O2 (3), 1,1'-(9-hydroperoxy-9-hydroxy-1,5-dimethyl-3,7-diazabicyclo[3.3.1]nonane-3,7-diyl)bis(2-bromoethanone) peroxosolvate C13H20Br2N2O5·H2O2 (4), and 1,1'-(9-hydroperoxy-9-hydroxy-1,5-dimethyl-3,7-diazabicyclo[3.3.1]nonane-3,7-diyl)bis(2-chloroethanone) peroxosolvate C13H20Cl2N2O5·H2O2 (5). Compounds 2-5 were synthesized for the first time and their crystal structures were determined by single-crystal X-ray diffractometry (SCXRD). To the best of our knowledge, 3-5 are unprecedented crystalline hydrogen peroxide adducts of organic hydroperoxides (R-OOH). Short intermolecular contacts between halogen and hydroperoxo oxygen atoms were found in 1-3. The halogen bonding of C-I(Br) fragments with dioxygen species in compounds 1-3 as well as in the previously reported cocrystal of diacetone diperoxide with triodotrinitrobenzene (6) was identified through reduced density gradient analysis, Hirshfeld surface analysis, and Bader analysis of crystalline electron density. The interactions were quantified using the electron density topological properties acquired from the periodic DFT calculations and evaluated to lie in the range of 9-19 kJ mol-1. A distinctive spectral feature was revealed for this type of interaction, involving a red shift of the characteristic O-O stretching vibration by about 6 cm-1, which appeared in IR spectra as a narrow low-intensity band in the region 837-872 cm-1.

Metastability of π-π stacking between the closed-shell ions of like charges

Planar cations or anions can form stacks in crystals or solutions, where the surrounding or environment plays a decisive role as demonstrated in previous studies. However, it remains unclear whether these counterintuitive interactions possess any inherent stability or are thoroughly repulsive if the constraint of environment is removed. In this work, we explored the inherent stability of π-π stacking between closed-shell ions of like charges with prototypes derived from experimental studies. The inherent metastability was identified by the characteristic local minima and the transition states preventing their dissociation and verified by ab initio molecular dynamics (AIMD) simulations. The nature of involved interactions was deciphered with the energy decomposition approach based on the block-localized wavefunction method (BLW-ED). Like the conventional neutral π-π stacking interactions, electron correlation is the most attractive energy component. But it is overturned by the Coulombic repulsion between net charges for all modes of dimerization, resulting in the overall repulsive inter-cation or anion interactions. Contributions from van der Waals interactions were also observed in the reduced density gradient analysis. The origin of the metastability was elucidated by examining the contributions of individual physical factors to the well-depths. The inherent metastability originates from the electron correlation, which dramatically increases due to the enhanced overlap between ions from a transition state to its corresponding minimum.

Sensing ability of carbon nitride (C6N8) for the detection of carbon monoxide (CO) and carbon dioxide (CO2)

Carbon nitride (C6N8) is explored as an adsorption material for harmful industrial gases such as carbon monoxide (CO) and carbon dioxide (CO2). The complexation of CO and CO2 with C6N8 (analyte@C6N8) is deeply studied by the analyses of interaction energy (IE), frontier molecular orbital (FMO), non-covalent interactions (NCI), natural bond orbital (NBO), Bader’s quantum theory of atoms in molecules (QTAIM), density of state (DOS), reduced density gradient (RDG), and electron localization function (ELF). The results of interaction energy (−18.870 kJ/mol to −14.991 kJ/mol) showed the adsorption strength of CO and CO2 gases on the C6N8 surface. NCI and QTAIM investigations demonstrated that non-covalent interactions occurred in CO2 @C6N8 and CO@C6N8 complexes. The NCI and RDG analyses indicated surface interaction with CO and CO2 gases. The emergence of novel energy levels in the DOS spectrum highlighted the system's susceptibility to contaminants and the development of new excited states in the PDOS spectrum demonstrated the chemical reactivity of complexes. Moreover, the results of QNBO show that surface (C6N8) extracted a relatively greater amount of charge from CO (0.018 e−1) as compared to CO2 (0.006 e−1). At 300 K, the analyte@C6N8 complexes recovery time (4.06 ×10−10 s and 1.92 ×10−9 s) showed sensing behavior of surface for CO and CO2 gases. Our results suggested that the C6N8 surface is a superb option for CO and CO2 gases.

Molecular structure, electronic properties, spectroscopic, quantum computational studies of 1-(4-hydroxy-3-methoxyphenyl)ethanone-effective anticancer medicine

The molecular structure of 1-(4-hydroxy-3-methoxyphenyl) ethenone has been optimized, and its various parameters were ascertained, using Density Functional Theory. The molecule’s Fourier Transform-Infra Red and Raman spectra are recorded and examined. By comparing the computational and experimental results, molecular structure, bond length, and vibrational band intensity were all interpreted. The Integral Equation Formalism polarizable continuum model’s depictions of electronic and Frontier Molecular Orbital solvent interaction investigations are sported to perceive the charge transfer among the atoms of the molecule in eco-green solvents such as water, acetone, and ethanol. The reactivity sites can be studied by locating and charting the electron density on the surface. The compound’s hardness, softness, electrophilicity, and ionization potential were all analyzed. The pharmacological effects and intra-molecular hyper conjugative interactions are liable for its molecular stability, as shown by Natural Bond Orbital research. Topological studies, including Electron Localized Function, Localized Orbital Locator, and Reduced density gradient analysis, were performed to locate the compound’s bonding area and Vander Waals interactions. Urea was used as a reference compound to examine the substance’s non-linear optical characteristics. Total Density of States has investigated the role of molecular orbitals. Drug-likeness, a Ramachandran plot, and molecular docking were also performed to further analyze 1-(4-hydroxy-3-methoxyphenyl) ethanone’s biological activity. The docking results lend credence to the idea that the title compound could function as a powerful cancer treatment.

Enhancing electron transport of 7-bis(diphenylphosphoryl)-9,9′-spirobifluorene through polarity reduction of polar covalent bonds using organic molecular additives

In the electron-transporting organic semiconductor, polar covalent bonds are a necessary design to deepen the Lowest Occupied Molecular Orbitals for effective charge injection. However, these bonds can increase molecular dipole moment, which can impede charge transport. In this study, molecular additives including Tetrathiafulvalene (TTF), 4-(2,3-Dihydro-1,3-dimethyl-1H-benzimidazol-2-yl)-N,N-dimethylbenzenamine (N-DMBI), and tetrakis(dimethylamno)ethylene (TDAE) were investigated. Despite being electron donors, no charge transfer occurred between the molecular additives and the π conjugated core of 7-bis(diphenylphosphoryl)-9,9′-spirobifluorene (SPPO13). However, the addition of 2% TTF resulted in a higher current density, while N-DMBI and TDAE led to a decrease. X-ray photoelectron spectroscopy, density functional theory, and reduced density gradient analysis indicated that a marginal charge transfer occurred from phosphorus atoms to TTF, forming a strong attractive bond between P = O and TTF, which was absent in N-DMBI and TDAE. The low molecular polarity and lack of polar covalent bonds are prerequisites for polarity reduction of the P = O bond in SPPO13, as demonstrated by the 2% addition of TTF resulting in higher electron transport current.

Synthesis, Antifungal Activity, Molecular Docking Studies, RDG Analysis, and DFT Computations on Structural Vibrational and Electronic Spectra of 3,5-Diamino-1,2,4-Triazolinium Picrate

In this study, the antifungal compound 3,5-Diamino-1,2,4-Triazolinium picrate (3,5-DTAZPA) crystals were fully grown and characterized using FT-Raman and FT-IR experiment techniques. Computational methods of 3,5-DTAZPA were performed up to B3LYP with a 6–311++G (d, p) basis set. The Optimized geometry and natural bond orbital (NBO) analysis were been carried out with the help of density functional theory (DFT). The vibrational assignments related to different modes of vibrations were built up by normal coordinate analysis (NCA). Frontier molecular orbital theory (HOMO-LUMO), molecular electrostatic potential (MEP) and Fukui functions were computed. reduced density gradient (RDG), the electron density’s topology and hydrogen bonds were analyzed. The Kirby–Bauer method was employed to assess 3,5-DTAZPA compound’s in vitro antifungal properties against fungal strains. The docking calculations were also carried out with the target protein.