Redox-active Ligand Research Articles

Low-Coordinate Mixed Ligand NacNac Complexes of Rare Earth Metals

We report the synthesis and characterization of two types of new mixed-ligand rare earth complexes: tetracoordinate (NacNacMes)Ln(BIANdipp) (Ln = Dy (1), Er (2) and Y (3)) and pentacoordinate (NacNacMes)Ln(APdipp)(THF) (Ln = Dy (4), Er (5) and Y (6)). The first three compounds were prepared by the reaction of [(BIANDipp)LnI] with potassium β-diketiminate. The salt metathesis of β-diketiminato-supported rare earth dichlorides (NacNacMes)LnCl2(THF)2 with sodium o-amidophenolate results in compounds 4-6. The crystal structures of complexes 1-6 were determined by single-crystal analysis. The combination of bulky monoanionic N-mesityl-substituted β-diketiminates with sterically hindered redox-active ligands led to the very low coordination numbers of rare earths and strong distortion of the chelate ligands.

Assessing the Extent of Potential Inversion by Cyclic Voltammetry: Theory, Pitfalls, and Application to a Nickel Complex with Redox-Active Iminosemiquinone Ligands.

Potential inversion refers to the situation where a protein cofactor or a synthetic molecule can be oxidized or reduced twice in a cooperative manner; that is, the second electron transfer is easier than the first. This property is very important regarding the catalytic mechanism of enzymes that bifurcate electrons and the properties of bidirectional redox molecular catalysts that function in either direction of the reaction with no overpotential. Cyclic voltammetry is the most common technique for characterizing the thermodynamics and kinetics of electron transfer to or from these molecules. However, a gap in the literature is the absence of analytical predictions to help interpret the values of the voltammetric peak potentials when potential inversion occurs; the cyclic voltammograms are therefore often analyzed by simulating the data, with no discussion of the possibility of overfitting and often no estimation of the error on the determined parameters. Here we formulate the theory for the voltammetry of freely diffusing or surface-confined two-electron redox species in the experimentally relevant irreversible limit where the peak separation depends on the scan rate. We explain why the model is intrinsically underdetermined, and we illustrate this conclusion by analysis of the voltammetry of a nickel complex with redox-active iminosemiquinone ligands. Being able to characterize the thermodynamics of two-electron electron-transfer reactions will be crucial for designing more efficient catalysts.

Role of Counterions in the Structural Stabilisation of Redox-Active Metal-Organic Frameworks.

The crystal structures of metal-organic frameworks (MOFs) are typically determined by the strong chemical bonds formed between the organic and inorganic building units. However, the latest generation of redox-active frameworks often rely on counterions in the pores to access specific charge states of the components. Here, we model the crystal structures of three layered MOFs based on the redox-active ligand 2,5-dihydroxybenzoquinone (dhbq): Ti2 (Cl2 dhbq)3 , V2 (Cl2 dhbq)3 and Fe2 (Cl2 dhbq)3 with implicit and explicit counterions. Our full-potential first-principles calculations indicate that while the reported hexagonal structure is readily obtained for Ti and V, the Fe framework is stabilised only by the presence of explicit counterions. For high counterion concentrations, we observe the formation of an electride-like pocket in the pore center. An outlook is provided on the implications of solvent and counterion control for engineering the structures and properties of porous solids.

Synthesis and Surface Attachment of Molecular Re(I) Complexes Supported by Functionalized Bipyridyl Ligands.

Eleven 2,2'-bipyridine (bpy) ligands functionalized with attachment groups for covalent immobilization on silicon surfaces were prepared. Five of the ligands feature silatrane functional groups for attachment to metal oxide coatings on the silicon surfaces, while six contain either alkene or alkyne functional groups for attachment to hydrogen-terminated silicon surfaces. The bpy ligands were coordinated to Re(CO)5Cl to form complexes of the type Re(bpy)(CO)3Cl, which are related to known catalysts for CO2 reduction. Six of the new complexes were characterized using X-ray crystallography. As proof of principle, four molecular Re complexes were immobilized on either a thin layer of TiO2 on silicon or hydrogen-terminated silicon. The surface-immobilized complexes were characterized using X-ray photoelectron spectroscopy, IR spectroscopy, and cyclic voltammetry (CV) in the dark and for one representative example in the light. The CO stretching frequencies of the attached complexes were similar to those of the pure molecular complexes, but the CVs were less analogous. For two of the complexes, comparison of the electrocatalytic CO2 reduction performance showed lower CO Faradaic efficiencies for the immobilized complexes than the same complex in solution under similar conditions. In particular, a complex containing a silatrane linked to bpy with an amide linker showed poor catalytic performance and control experiments suggest that amide linkers in conjugation with a redox-active ligand are not stable under highly reducing conditions and alkyl linkers are more stable. A conclusion of this work is that understanding the behavior of molecular Re catalysts attached to semiconducting silicon is more complicated than related complexes, which have previously been immobilized on metallic electrodes.

Bonding and Reactivity in Terminal versus Bridging Arenide Complexes of Thorium Acting as ThII Synthons.

Thorium redox chemistry is extremely scarce due to the high stability of ThIV . Here we report two unique examples of thorium arenide complexes prepared by reduction of a ThIV -siloxide complex in presence of naphthalene, the mononuclear arenide complex [K(OSi(Ot Bu)3 )3 Th(η6 -C10 H8 )] (1) and the inverse-sandwich complex [K(OSi(Ot Bu)3 )3 Th]2 (μ-η6 ,η6 -C10 H8 )] (2). The electrons stored in these complexes allow the reduction of a broad range of substrates (N2 O, AdN3 , CO2 , HBBN). Higher reactivity was found for the complex 1 which reacts with the diazoolefin IDipp=CN2 to yield the unexpected ThIV amidoalkynyl complex 5 via a terminal N-heterocyclic vinylidene intermediate. This work showed that arenides can act as convenient redox-active ligands for implementing thorium-ligand cooperative multielectron transfer and that the reactivity can be tuned by the arenide binding mode.

Redox-active ligands - a viable route to reactive main group metal compounds.

Anionic redox-active ligands such as o-amidophenolates, catecholates, dithiolenes, 1,2-benzendithiolates, 2-amidobenzenethiolates, reduced α-diimines, ferrocenyl and porphyrinates are capable of reversible oxidation and thus have the ability to act as sources of electrons for metal centres. These and other non-innocent ligands have been employed in coordination complexes of base transition metals to influence their redox chemistry and afford compounds with useful catalytic, optical, magnetic and conducting properties. Despite the focus in contemporary main group chemistry on designing reactive compounds with potential catalytic activity, comparatively few studies exploring the chemistry of main group metal complexes incorporating redox-active ligands have been reported. This article highlights relevant chemical reactivity and electrochemical studies that probe the oxidation/reduction of main group metal compounds possessing redox-active ligands and comments on the prospects for this relatively untapped avenue of research.

Utility of redox-active ligands for reversible multi-electron transfer in uranyl(vi) complexes

Three uranyl(vi) complexes with redox-active ligands showed reversible multi-step redox processes. Their redox centers are always the coordinating ligand and the centered U exhibits redox-innocent behavior.

Impact of the metal centre (Al3+, Fe3+) on the post-synthetic lithiation of functionalized MIL-53s and the electrochemical properties of lithiated derivatives

MIL-53(M)-(OH)2 (M = Al, Fe) solids based on a redox active dioxoterephthalate ligand were lithiated post-synthesis, and the resulting products were evaluated as positive electrode materials for Li-ion batteries.

Expanding the horizons of porphyrin metal-organic frameworks via catecholate coordination: exploring structural diversity, material stability and redox properties.

Porphyrin based Metal-Organic Frameworks (MOFs) have generated high interest because of their unique combination of light absorption, electron transfer and guest adsorption/desorption properties. In this study, we expand the range of available MOF materials by focusing on the seldom studied porphyrin ligand H10TcatPP, functionalized with tetracatecholate coordinating groups. A systematic evaluation of its reactivity with M(iii) cations (Al, Fe, and In) led to the synthesis and isolation of three novel MOF phases. Through a comprehensive characterization approach involving single crystal and powder synchrotron X-ray diffraction (XRD) in combination with the local information gained from spectroscopic techniques, we elucidated the structural features of the solids, which are all based on different inorganic secondary building units (SBUs). All the synthesized MOFs demonstrate an accessible porosity, with one of them presenting mesopores and the highest reported surface area to date for a porphyrin catecholate MOF (>2000 m2 g-1). Eventually, the redox activity of these solids was investigated in a half-cell vs. Li with the aim of evaluating their potential as electrode positive materials for electrochemical energy storage. One of the solids displayed reversibility during cycling at a rather high potential (∼3.4 V vs. Li+/Li), confirming the interest of redox active phenolate ligands for applications involving electron transfer. Our findings expand the library of porphyrin-based MOFs and highlight the potential of phenolate ligands for advancing the field of MOFs for energy storage materials.

Gold(i) complexes with redox active BIAN and MIAN ligands: synthesis, structure and electrochemistry

This article reports on the synthesis and structure of novel cationic gold(i) complexes with BIAN/MIAN ligands, displaying redox activity and the antichelate effect.

Geometry-dependent valence tautomerism, magnetism, and electrical conductivity in 1D iron-tetraoxolene chains.

Redox-active tetraoxolene ligands such as 1,4-dihydroxybenzoquinone provide access to a diversity of metal-organic architectures, many of which display interesting magnetic behavior and high electrical conductivity. Here, we take a closer look at how structure dictates physical properties in a series of 1D iron-tetraoxolene chains. Using a diphenyl-derivatized tetraoxolene ligand (H2Ph2dhbq), we show that the steric profile of the coordinating solvent controls whether linear or helical chains are exclusively formed. Despite similar ligand environments, only the helical chain displays temperature-dependent valence tautomerism, switching from (FeII)(Ph2dhbq2-) to (FeIII)(Ph2dhbq3˙-) at temperatures below 203 K. The stabilization of ligand radicals leads to exceptionally strong magnetic exchange coupling (J = -230 ± 4 cm-1). Meanwhile, the linear chains are more amenable to oxidative doping, leading to Robin-Day class II/III mixed-valency and an increase in electrical conductivity by nearly three orders of magnitude. While previous studies have focused on the effects of changing metal and ligand identity, this work highlights how altering the metal-ligand connectivity can be a similarly powerful tool for tuning materials properties.

Switching between DNA binding modes with a photo- and redox-active DNA-targeting ligand.

A disulfide-functionalized bis-benzo[b]quinolizinium is presented that is transformed quantitatively into its cyclomers in a fast intramolecular [4 + 4] photocycloaddition. Both the bis-quinolizinium and the photocyclomers react with glutathione (GSH) or dithiothreitol (DTT) to give 9-(sulfanylmethyl)benzo[b]quinolizinium as the only product. As all components of this reaction sequence have different DNA-binding properties, it enables the external control and switching of DNA association. Hence, the bis-benzo[b]quinolizinium binds strongly to DNA and is deactivated upon photocycloaddition to the non-binding cyclomers. In turn, the subsequent cleavage of the cyclomers with DTT regains a DNA-intercalating benzoquinolizinium ligand. Notably, this sequence of controlled deactivation and recovery of DNA-binding properties can be performed directly in the presence of DNA.

Tuning the potential of redox-active diphosphine ligands based on the alkyne complexes [Tp*W(CO)L{η2-C2(PPh2)2}

Eleven complexes with the general formula [Tp*W(CO)L{η2-C2(PPh2)2}]n+ {Tp* = hydridotris(3,4,5-trimethylpyrazolyl)-borate, L = F-, Cl-, Br-, I-, MeS-, PhS-, pyCH2S-, CN- and TfO-; n = 0 and L = CH3CN and pyridine; n = 1} have been synthesized and fully characterized. Depending on L, the oxidation process from W(II) to W(III) is detected between -0.28 and +0.55 V vs. Fc/Fc+ and the spectroscopic properties (X-ray, IR, and NMR) are influenced according to the electron-rich or electron-poor character of the central metal. The basicity of the alkyne complex-based phosphine groups was estimated by the 31P/77Se coupling method of the corresponding diselenides. Selected examples of the dppa-complex ligands were converted into the corresponding κ2-PdCl2 chelate complexes and employed in a Sonogashira reaction in order to estimate the effect of L on the catalytic behaviour of the dinuclear complexes. While the spectroscopic properties show a good correlation with the redox potential in a mostly linear fashion, catalytic activity is influenced only slightly. The effect of PdCl2 coordination on the alkyne complex is evident from the W(II)/W(III) redox potentials measured by cyclic voltammetry supported by a change of the CO stretching frequency in IR. A comparison of the molecular structures of the alkyne complexes with terminal phosphine groups and the PdCl2 chelate complexes all determined by XRD shows the essential flexibility of the bend-back angles in the alkyne complex moiety.

Switching between DNA binding modes with a photo- and redox-active DNA-targeting ligand, part II: the influence of the substitution pattern.

A disulfide-functionalized photoactive DNA ligand is presented that enables the control of its DNA-binding properties by a combination of a photocycloaddition reaction and the redox reactivity of the sulfide/disulfide functionalities. In particular, the initially applied ligand binds to DNA by a combination of intercalation and groove-binding of separate benzo[b]quinolizinium units. The association to DNA is interrupted by an intramolecular [4 + 4] photocycloaddition to the non-binding head-to-head cyclomers. In turn, the subsequent cleavage of these cyclomers with dithiothreitol (DTT) regains temporarily a DNA-intercalating benzoquinolizinium ligand that is eventually converted into a non-binding benzothiophene. As a special feature, this sequence of controlled deactivation, recovery and internal shut-off of DNA-binding properties can be performed directly in the presence of DNA.

Design and synthesis of a solution-processed redox-active bis(formazanate) zinc complex for resistive switching applications.

In this paper, we report the synthesis and characterization of a mononuclear zinc complex (1) containing a redox-active bis(4-antipyrinyl) derivative of the 3-cyanoformazanate ligand. Complex 1 was readily obtained by refluxing zinc acetate with 3-cyano-1,5-(4-antipyrinyl)formazan (LH) in a methanolic solution. Single-crystal X-ray diffraction analysis of complex 1 shows that the formazanate ligands bind to the zinc center in a five-member chelate "open" form via the 1- and 4-positions of the 1,2,4,5-tetraazapentadienyl formazanate backbone leading to the formation of the mononuclear bis(formazanate) zinc complex exhibiting a distorted octahedral geometry. We also report the study of resistive-switching random access memory application of this solution-processable bis(formazanate) Zn(II) complex to facilitate the practical implementation of transition metal complex-based molecular memory devices. The complex demonstrated high conductance switching with a large ON-OFF ratio, good stability, and a long retention time. A trap-controlled space charge limited current mechanism is proposed for the observed resistive switching behavior of the device, wherein the role played by the [ZnIIL2] complex that comprises the extended redox-active conjugated ligand backbone is revealed by corroborating electrochemical studies, spectrochemical experiments, and DFT calculations. In addition to providing significant insights into the molecular design of transition metal complexes for memory applications, this study also presents the utilization of ZnIIL2 towards the realization of non-volatile resistive random access memory (RRAM) devices with inorganic/organic hybrid active layers that are highly cost-effective and sustainable. These devices exhibited multilevel switching and low current operation, both of which are desirable for advanced memory applications.

The role of a redox-active non-innocent ligand in additive-free C-C Glaser-Hay and Suzuki coupling reactions by an o-aminophenol palladium(ii) complex.

A novel mononuclear palladium complex with 2-(3,5-di-tert-butyl-2-hydroxyphenyl amino) benzonitrile as a non-innocent ligand (abbreviated as PdIIL2 NIS) was synthesized, and characterized by IR, UV-Vis, 1H and 13C NMR spectroscopies and elemental analysis. The crystal structure clearly showed that the metal center was in a square planar environment. The bond lengths obtained from X-ray structure analysis revealed that both ligands are in the o-iminobenzosemiquinone radical form. The neutral complex showed strong absorptions in the NIR region, corresponding to the ILCT (intra-ligand charge transfer). Catalytic tests performed for the coupling reaction of terminal alkynes showed that the palladium PdIIL2 NIS complex acts as a highly effective catalyst for the base-free C-C coupling reactions, leading to diyne derivatives with excellent yields. The PdIIL2 NIS complex in ethanol, as a green solvent, is demonstrated to be an exceptionally active phosphine-free catalyst for the Suzuki reaction of aryl iodides and bromides. The reaction can be carried out under mild conditions (room temperature) with high yields without using a microwave or phosphine ligands. This catalyst exhibits an interesting application of redox non-innocent ligands, the electron reservoir behavior, which makes it needless to use additional reagents. The theoretical calculation provides more details about the complex structure, molecular orbitals, and electronic state.

Vanadium-catalysed regioselective hydroboration of epoxides for synthesis of secondary alcohols.

Regioselective epoxide ring-opening through hydroboration catalysed by a vanadium(III) dialkyl complex supported by a redox-active terpyridine ligand is reported. Secondary alcohols were obtained in high yields via effective Markovnikov hydroboration of terminal epoxides, showcasing a new catalytic application of an earth-abundant vanadium(III) complex.

Kinetic and mechanistic investigations of dioxygen reduction by a molecular Cu(II) catalyst bearing a pentadentate amidate ligand.

A pentadentate Cu(II) complex, [CuII(dpaq)](ClO4) (1), featuring a redox active ligand, H-dpaq (H-dpaq = 2-[bis(pyridine-2-ylmethyl)]amino-N-quinolin-8-yl-acetamidate), catalyses four-electron reduction of dioxygen by decamethylferrocene (Fc*) in the presence of trifluoroacetic acid (CF3COOH) in acetone at 298 K. No catalytic oxygen reduction was observed in the presence of stronger Brønsted acids than CF3COOH, such as perchloric acid (HClO4) or trifluoromethanesulphonic acid (HOTf). In contrast, facile catalytic reduction of O2 occurs by Fc* with 1 and HClO4 or HOTf in dimethylformamide (DMF). The use of CF3COOH as the proton source in DMF results in the suppression of O2 reduction under otherwise identical reaction conditions. While the O2 reduction reactions in DMF are linearly dependent on the pKa of Brønsted acids, the acid dependence on catalytic O2-reduction reactivity by 1 in acetone showed complete reversal. Cyclic voltammetry studies using p-chloranil as the probe substrates in the presence of acids in the solvents reveal that the strengths of the protonic acids increase significantly in acetone compared to that in DMF. The amidate-N in [CuII(dpaq)](ClO4) (1) undergoes protonation in the presence of HClO4 or HOTf in DMF to form [CuII(H-dpaq)]2+ (1-H+), but not in the presence of CF3COOH. Enhanced acid strength of CF3COOH in acetone, however, effectively protonates 1 and triggers O2 reduction. Protonation of 1 with HClO4 or HOTf in acetone results in the change of its coordination environment, and this protonated species does not trigger O2 reduction. Detailed kinetic studies indicate that 1-H+ undergoes reduction by two-electrons and the reduced species binds O2 to form a Cu(II)-superoxo intermediate. This is followed by a rate-determining proton-coupled electron-transfer (PCET) reduction to generate the Cu(II)-hydroperoxo intermediate. While catalytic O2 reduction in acetone occurs predominantly via a 4e-/4H+ pathway, product selectivity (H2O vs. H2O2) in DMF depends upon the concentration of the reductant (Fc*). While dioxygen reduction to H2O2 is favoured at low [Fc*], mechanistic studies suggest that O2 reduction with high [Fc*] proceeds via a [2e- + 2e-] mechanism, where the released H2O2 during catalysis is further reduced to water.

Redox-active ligand promoted electrophile addition at cobalt.

The reactivity of an electron-rich cobalt complex bearing an o-phenylenediamide ligand with electrophilic CF3+ and F+ sources is reported. These reactions lead to generation of a Co(III)-CF3 or Co(III)-F complex, promoted by redox-active ligand-to-substrate two-electron transfer. The rate of trifluoromethyl addition at cobalt correlates with the potential difference between the cobalt complex and the CF3+ source. We present initial demonstrations of radical trifluoromethylation and nucleophilic fluorination of organic substrates, setting the stage for the development of electrocatalytic pathways for these bond-forming reactions.

A macrocyclic quinol-containing ligand enables high catalase activity even with a redox-inactive metal at the expense of the ability to mimic superoxide dismutase.

Previously, we found that linear quinol-containing ligands could allow manganese complexes to act as functional mimics of superoxide dismutase (SOD). The redox activity of the quinol enables even Zn(ii) complexes with these ligands to catalyze superoxide degradation. As we were investigating the abilities of manganese and iron complexes with 1,8-bis(2,5-dihydroxybenzyl)-1,4,8,11-tetraazacyclotetradecane (H4qp4) to act as redox-responsive contrast agents for magnetic resonance imaging (MRI), we found evidence that they could also catalyze the dismutation of H2O2. Here, we investigate the antioxidant behavior of Mn(ii), Fe(ii), and Zn(ii) complexes with H4qp4. Although the H4qp4 complexes are relatively poor mimetics of SOD, with only the manganese complex displaying above-baseline catalysis, all three display extremely potent catalase activity. The ability of the Zn(ii) complex to catalyze the degradation of H2O2 demonstrates that the use of a redox-active ligand can enable redox-inactive metals to catalyze the decomposition of reactive oxygen species (ROS) besides superoxide. The results also demonstrate that the ligand framework can tune antioxidant activity towards specific ROS.