Redox-active Ligand Research Articles

Putting the squeeze on valence tautomerism in cobalt-dioxolene complexes

Molecules that can reversibly switch between electronic states under an external stimulus are of interest to numerous applications. Complexes of open shell metal ions with redox active ligands undergo valence tautomerism, resulting in magnetic, colour and structural switching, relevant to data storage and actuators. However, the precise structural changes occurring during valence tautomerism in the solid state are unclear due to the lack of atomic-resolution characterization. Here, variable temperature and high-pressure single crystal X-ray diffraction is used to characterize valence tautomerism in two isostructural cobalt complexes, [Co(bis(6-methyl-2-pyridylmethyl) amine)(3,5-di-tert-butyl-1,2-dioxolene)]+ and [Co(tris(6-methyl-2-pyridylmethyl)amine)(3,5-di-tert-butyl-1,2-dioxolene)]+ to atomic resolution. The less sterically hindered dimethylated complex exhibits two-step thermally-induced interconversion between the high-spin CoII-seminquinonate and low-spin CoIII-catecholate forms (valence tautomerism) at 155 and 95 K due to the presence of two symmetry-independent complexes. In contrast, the more sterically hindered trimethylated complex does not display thermal valence tautomerism. Both complexes exhibit unique behaviour under high pressure. The dimethylated species undergoes gradual, one-step valence tautomerism in both symmetry-independent complexes concurrently between 0.43 GPa and 1.30 GPa. In the trimethylated species, pressure is sufficient to overcome steric hindrance, leading to one-step valence tautomerism between 2.60 GPa and 3.10 GPa, demonstrating pressure-triggered valence tautomerism in a thermally inactive complex. This study is among the few investigations using in situ high-pressure single crystal X-ray diffraction to achieve atomic-level structural characterization of valence tautomerism, aiding the development of robust structure-property relationships in these types of complexes.

Heterobimetallic NiFe Complex for Photocatalytic CO2 Reduction: United Efforts of NiFe Dual Sites.

Catalytic CO2 reduction poses a significant challenge for the conversion of CO2 into chemicals and fuels. Ni-Fe carbon monoxide dehydrogenase ([NiFe]-CODH) effectively mediates the reversible conversion of CO2 and CO at a nearly thermodynamic equilibrium potential, highlighting the heterobimetallic cooperation for the design of CO2 reduction catalysts. However, numerous NiFe biomimetic model complexes have realized little success in CO2 reduction catalysis, which underscores the crucial role of precise bimetallic configuration and functionality. Herein, we presented a heterobimetallic NiFe complex for the photocatalytic reduction of CO2 to CO, demonstrating significantly enhanced catalytic performance compared to the homonuclear NiNi catalyst. Photocatalytic and mechanistic investigations revealed that with the assistance of a redox-active phenanthroline ligand, NiFe achieves dual-site activation of CO2 through a pivotal intermediate, NiII(μ-CO22--κC:κO)FeII, where the Lewis acidity of the FeII site plays an important role, as corroborated in the homonuclear FeFe system. This study introduces the first heteronuclear NiFe molecular catalyst capable of efficiently catalyzing the reduction of CO2 to CO, deepening insights into heterobimetallic cooperation and offering a novel strategy for designing highly active and selective CO2 reduction catalysts.

N-Heterocyclic Carbene-Derived Carbon Disulfide Radical Ligands for Palladium Diradicals.

N-heterocyclic carbenes (NHCs) are recognized for their ability to stabilize various main group radicals; however, NHC-derived, sulfur-based radicals remain rare. In this study, we successfully synthesized and characterized a series of palladium diradical complexes that featured new sulfur-based radical ligands from NHC-carbon disulfide adducts. Spectroscopic and computational characterizations of the palladium complexes confirmed the open-shell singlet ground state, which resulted from the antiferromagnetic coupling of two unpaired electrons on each ligand. Proton nuclear magnetic resonance relaxometry was used to experimentally confirm the presence of these unpaired electrons. Moreover, the redox behavior of the complexes was localized on the ligand center, confirming the redox activity of the ligands. The discovery of this sulfur-based, redox-active radical ligand underscores the versatility and significance of NHC-derived radicals, thereby expanding the repertoire of radical ligands and opening new avenues for advanced material and catalytic systems.

Unveiling the Unique Reactivity of Anionic Mn(I) Complexes via Metal-Ligand Cooperation: Nucleophilic Attack on C(sp3)-X Bonds.

Metal-ligand cooperation (MLC) has emerged as a pivotal strategy for the catalytic activation of small molecules within both synthetic and biological arenas. Leveraging this approach, a suite of potent catalytic reactions─encompassing hydrogenation, hydroelementation, and dehydrogenative processes─have been realized, with notable advances in manganese catalysis in recent years. However, the activation of alkyl halides by Mn complexes, which typically requires strong reductants to form Mn(-I) complexes that are incompatible with standard cross-coupling conditions, remains a significant challenge. This limitation underscores the urgent need to investigate alternative methods for activating C(sp3)-X bonds using higher valence state Mn complexes. In response to this challenge, we present the synthesis, characterization, and reactivity of a new anionic Mn(I) complex featuring a redox-active dianionic ligand that induces multiple MLC functionalities. We have discovered an innovative mechanism of MLC, characterized by a single ligand transferring two electrons to the metal center. This novel process facilitates an orbital-symmetry-allowed nucleophilic attack on C(sp3)-X bonds, preserving manganese's oxidative state at +1. To the best of our knowledge, this is the first instance where the MLC strategy via a two-electron transfer process has been utilized to execute an SN2 nucleophilic attack at a C(sp3)-X bond by a relatively electron-deficient metal center like Mn(I). Additionally, the dianionic ligand of the anionic Mn(I) complex exhibits ambident nucleophilicity by reacting with different electrophiles, further highlighting its versatile reactivity.

Cobalt-Catalyzed Asymmetric Hydrogenation of Ketones Enabled by the Synergism of an N-H Functionality and a Redox-Active Ligand.

The transition metal-catalyzed asymmetric hydrogenation (AH) of ketones to produce enantioenriched alcohols is an important reaction in organic chemistry with applications in the pharmaceutical and agrochemical fields. Using earth-abundant, biorelevant cobalt as the central metal in the catalyst has a high potential to improve sustainability and achieve hydrogenation reactions that are scalable. However, due to the high d-electron count, designing cobalt catalysts that exhibit turnover numbers (TONs, ≥1000) and enantioselectivities (≥90%) sufficient for synthetic utility and practical scalability (≥1 kg scale) remains a challenge. In this work, an efficient catalyst design strategy utilizing an amino(imino)diphosphine Co(II) bromide precatalyst is presented to achieve this goal. The quantitative production of a wide range of secondary chiral alcohols with TONs of up to 150,000 and an enantiomeric excess (e.e.) of up to 99% at a scale of up to 1.35 kg was achieved, indicating that the proposed cobalt catalyst is highly promising for AH and scale-up reactions. A mechanistic study revealed that the synergism of an N-H functionality and a redox-active ligand endows the cobalt catalyst with a high productivity and excellent enantioselectivity.

Cadmium(II) Complexes with Redox-Active Indophenol Ligands: Synthesis and Structures

Cadmium(II) Complexes with Redox-Active Indophenol Ligands: Synthesis and Structures

Hemilabile and Redox-Active Quinone Ligands Unlock sp3-Rich Couplings in Nickel-Catalyzed Olefin Carbosulfenylation.

A three-component coupling approach toward structurally complex dialkylsulfides is described via the nickel-catalyzed 1,2-carbosulfenylation of unactivated alkenes with organoboron nucleophiles and alkylsulfenamide (N-S) electrophiles. Efficient catalytic turnover is facilitated using a tailored N-S electrophile containing an N-methyl methanesulfonamide leaving group, allowing catalyst loadings as low as 1 mol%. Regioselectivity is controlled by a collection of monodentate, weakly coordinating native directing groups, including sulfonamides, amides, sulfinamides, phosphoramides, and carbamates. Key to the development of this transformation is the identification of quinones as a family of hemilabile and redox-active ligands that tune the steric and electron properties of the metal throughout the catalytic cycle. DFT calculations show that the duroquinone (DQ) ligand adopts different coordination modes in different stages of the Ni-catalyzed 1,2-carbosulfenylation-binding as an η6 capping ligand to stabilize the precatalyst/resting state and prevent catalyst decomposition, binding as an X-type redox-active durosemiquinone radical anion to promote alkene migratory insertion with a less distorted square planar Ni(II) center, while binding as an η1 L-type ligand to promote N-S oxidative addition at a relatively more electron-rich and sterically less crowded Ni(I) center.

A ligand-modulated photostable Mn(I)-carbonyl complex for preferential conversion of CO2 to CO in water.

A strategically designed redox-active ligand ensures proper electronic balance in an Mn(I)-carbonyl template to induce photostability and water solubility. This newly designed Mn-carbonyl complex showcased rapid CO2 reduction with preferential production of CO (faradaic efficiency ∼88%) as the only C1 product in pure water, even from a flue gas resource.

Synthesis, Structure, Electrochemical Properties, and Antioxidant Activity of Organogermanium(IV) Catecholate Complexes.

A series of novel organogermanium(IV) catecholates 1-9 of the general formula R'2Ge(Cat), where R' = Ph, Et, have been synthesized. Compounds were characterized by 1H, 13C NMR, IR spectroscopy, and elemental analysis. The molecular structures of 1-3, 6, and 8 in crystal state were established using single-crystal X-ray analysis. The complexes are tetracoordinate germanium(IV) compounds containing a dioxolene ligand in a dianion (catecholato) form. Electrochemical transformations of target germanium(IV) complexes have been studied by cyclic voltammetry. The electro-oxidation mechanism of complexes 1-5, 7, and 10 (the related complex Ph2Ge(3,5-Cat) where 3,5-Cat is 3,5-di-tert-butylcatecholate) involves the consecutive formation of mono- and dicationic derivatives containing the oxidized forms of redox-active ligands. The stability of the generated monocations depends both on the hydrocarbon groups at the germanium atom and on the substituents in the catecholate ring. Compounds 6, 8, and 9 are oxidized irreversibly under the electrochemical conditions with the formation of unstable complexes. The radical scavenging activity and antioxidant properties of new complexes were estimated in the reaction with DPPH radical, ABTS radical cation, and CUPRACTEAC assay. It has been found that compounds 8 and 9 with benzothiazole or phenol fragments are more active in DPPH test. The presence of electron-rich moieties in the catecholate ligand makes complexes 5 and 7-9 more reactive to ABTS radical cation. The value of CUPRACTEAC for organogermanium(IV) catecholates varies from 0.23 to 1.45. The effect of compounds 1-9 in the process of lipid peroxidation of rat liver (Wistar) homogenate was determined in vitro. It was found that most compounds are characterized by pronounced antioxidant activity. A feature of complexes 1, 3, and 5-9 is the intensification of the antioxidant action with the incubation time. In the presence of additives of complexes 3, 5, 6, and 8, an induction period was observed during the process of lipid peroxidation.

Lanthanide (Sm, Dy) Complexes with the 9,10-Phenanthrenediimine Redox-Active Ligand: Synthesis and Structures

The complex formation of the redox-active ligand bis(N, N’-2,6-diisopropylphenyl)-9,10-phenanthrenediimine (DippPDI) with alkaline metal (Li, K) and lanthanide (Sm, Dy) cations is studied. The reduction of DippPDI with an alkaline metal excess affords the dianionic form of the ligand (DippPDA2–), which crystallizes with the potassium cation as the coordination polymer [K2(DippPDA)(Thf)3] (Thf is tetrahydrofuran, THF). The reaction of equimolar amounts of the lithium salt with the dianionic form of the ligand and neutral diimine affords the lithium complex with the radical-anion form (DippPSI•–) crystallized as [Li(DippPSI)(Thf)2]. The samarium(III) complex [SmCp*(DippPDA)(Тhf)] (I) is formed by the reduction ofDippPDI with samarocene [Sm (Thf)2] (Cp* is pentamethylcyclopentadienide): both the samarium(II) cation and Cp*– anion are oxidized in the reaction.DippPDI does not react with similar ytterbocene. The dysprosium(III) complexes are synthesized by the ion exchange reactions between DyI3(Thf)3.5 and potassium or lithium salt with theDippPDA2-dianion. Similar complexes [Dy(DippPDA)I(Thf)2] (IIThf) and [Dy(DippPDA)I(Thf)(Et2O)] () are formed in the reactions with the potassium salt depending on the solvent used: a THF-hexane or a diethyl ether-n-hexane mixture, respectively. The coordination of the dysprosium cation by the π system of the conjugated fragment of the NCCN ligand is observed in IIThf, whereas in this coordination is absent. The reaction with Li2(DippPDA) affords the binary complex salt [Li(Тhf)3(Et2O)][DyI2(DippPDA)(Тhf)] (III, crystallization from a THF-Et2O mixture). The crystallization from THF gives the [Li(Тhf)4][DyI2(DippPDA)(Thf)] salt (III') containing the same anion as III. The structures of all new complexes are studied by X-ray diffraction (XRD, CIF files CCDC nos. 2260307–2260313).

Design of Cr-Based Molecular Electrocatalyst Systems for the CO2 Reduction Reaction.

ConspectusHuman influence on the climate system was recently summarized by the sixth Intergovernmental Panel on Climate Change (IPCC) Assessment Report, which noted that global surface temperatures have increased more rapidly in the last 50 years than in any other 50-year period in the last 2000 years. Elevated global surface temperatures have had detrimental impacts, including more frequent and intense extreme weather patterns like flooding, wildfires, and droughts. In order to limit greenhouse gas emissions, various climate change policies, like emissions trading schemes and carbon taxes, have been implemented in many countries. The most prevalent anthropogenic greenhouse gas emitted is carbon dioxide (CO2), which accounted for 80% of all U.S. greenhouse gas emissions in 2022. The reduction of CO2 through the use of homogeneous electrocatalysts generally follows a two-electron/two-proton pathway to produce either carbon monoxide (CO) with water (H2O) as a coproduct or formic acid (HCOOH). These reduced carbon species are relevant to industrial applications: the Fischer-Tropsch process uses CO and H2 to produce fuels and commodity chemicals, while HCOOH is an energy dense carrier for fuel cells and useful synthetic reagent. Electrochemically reducing CO2 to value-added products is a potential way to address its steadily increasing atmospheric concentrations while supplanting the use of nonrenewable petrochemical reserves through the generation of new carbon-based resources. The selective electrochemical reduction of CO2 (CO2RR) by homogeneous catalyst systems was initially achieved with late (and sometimes costly) transition metal active sites, leading the field to conclude that transition metal complexes based on metals earlier in the periodic table, like chromium (Cr), were nonprivileged for the CO2RR. However, metals early in the table have sufficient reducing power to mediate the CO2RR and therefore could be selective in the correct coordination environment. This Account describes our efforts to develop and optimize novel Cr-based CO2RR catalyst systems through redox-active ligand modification strategies and the use of redox mediators (RMs). RMs are redox-active molecules which can participate cocatalytically during an electrochemical reaction, transferring electrons─often accompanied by protons─to a catalytic active site. Through mechanistic and computational work, we have found that ligand-based redox activity is key to controlling the intrinsic selectivity of these Cr compounds for CO2 activation. Ligand-based redox activity is also essential for developing cocatalytic systems, since it enables through-space interactions with reduced RMs containing redox-active planar aromatic groups, allowing charge transfer to occur within the catalyst assembly. Following a summary of our work, we offer a perspective on the possibilities for future development of catalytic and cocatalytic systems with early transition metals for small molecule activation.

Elucidating the Impact of Rare Earth or Transition Metal Identity on the Physical and Electronic Structural Properties of a Series of Redox-Active Tris(amido) Complexes.

The use of redox-active ligands with the f-block elements has been employed to promote unique chemical transformations and explore their unique emergent electronic properties for a myriad of applications. In this study, we report eight new tris(amido) metal complexes: 1-Ln (Ln = Tb3+, Dy3+, Ho3+, Er3+, Tm3+, and Yb3+), 1-La, and 1-Ti (an early transition metal analogue). The one-electron oxidation of the tris(amido) ligand was conducted to generate semi-iminato complexes 2-Ln, 2-La, and 2-Ti, and these complexes were studied using EPR. Tris(amido) complexes 1-Ln, 1-La, and 1-Ti were fully characterized using a range of spectroscopic (NMR and UV-vis/NIR) and physical techniques (X-ray diffraction and cyclic voltammetry, with the exception of 1-La). Computational methods were employed to further elucidate the electronic structures of these complexes. Lastly, complexes 1-Ln, 1-La, and 1-Ti were probed as catalysts for alkyl-alkyl cross-coupling, and the initial rate of the reaction was measured to explore the influence of the metal ion.

Interfacial Electrochemistry of Catalyst-Coordinated Graphene Nanoribbons.

The immobilization of molecular electrocatalysts on conductive electrodes is an appealing strategy for enhancing their overall activity relative to those of analogous molecular compounds. In this study, we report on the interfacial electrochemistry of self-assembled two-dimensional nanosheets of graphene nanoribbons (GNR-2DNS) and analogs containing a Rh-based hydrogen evolution reaction (HER) catalyst (RhGNR-2DNS) immobilized on conductive electrodes. Proton-coupled electron transfer (PCET) taking place at N-centers of the nanoribbons was utilized as an indirect reporter of the interfacial electric fields experienced by the monolayer nanosheet located within the electric double layer. The experimental Pourbaix diagrams were compared with a theoretical model, which derives the experimental Pourbaix slopes as a function of parameter f, a fraction of the interfacial potential drop experienced by the redox-active group. Interestingly, our study revealed that GNR-2DNS was strongly coupled to glassy carbon electrodes (f = 1), while RhGNR-2DNS was not (f = 0.15). We further investigated the HER mechanism by RhGNR-2DNS using electrochemical and X-ray absorption spectroelectrochemical methods and compared it to homogeneous molecular model compounds. RhGNR-2DNS was found to be an active HER electrocatalyst over a broader set of aqueous pH conditions than its molecular analogs. We find that the improved HER performance in the immobilized catalyst arises due to two factors. First, redox-active bipyrimidine-based ligands were shown to dramatically alter the activity of Rh sites by increasing the electron density at the active Rh center and providing RhGNR-2DNS with improved catalysis. Second, catalyst immobilization was found to prevent catalyst aggregation that was found to occur for the molecular analog in the basic pH. Overall, this study provides valuable insights into the mechanism by which catalyst immobilization can affect the overall electrocatalytic performance.

Redox Active Ligands for Catalyzing the Hydrogen Evolution Reaction.

Boron subphthalocyanines with chloride and fluoride axial ligands and three antimony complexes chelated by corroles that differ in size and electron-richness were examined as electrocatalysts for reduction of protons to hydrogen. Experiment- and computation-based investigations revealed that all redox events are ligand-centered and that the meso-C of the corroles and the peripheral N atoms of the subphthalocyanines are the largely preferred proton-binding sites.

Modulating the reduction potential and ligand basicity of Ni(II) HER catalysts with highly conjugated N2S2 ligands

Molecular catalysts with N2S2 chelates and earth abundant metals have been used in different applications. With their versatile nature to modulate activity through changes in the ligand framework, they are excellent candidates to generate low-cost and sustainable energy as electrocatalysts for the hydrogen evolution reaction (HER). Herein we demonstrate the modulation of the reduction potential and basicity across a series of six square planar Ni(II) complexes with bis(thiosemicarbazonato) (BTSC), hybrid thiosemicarbazonato-alkylthiocarbamato (TSTC), and bis(alkylthiocarbamato) (BATC) ligands and evaluate their activity as homogenous HER catalysts. The redox active ligands have been designed to modulate the electronic structure of the N2S2Ni core and to systematically alter their respective pKa values. Cyclic voltammograms of all six complexes show two reversible reduction events in acetonitrile that systematically shift to more anodic potentials when the pendent methylthiosemicarbazonato (–NN=C(S)NHMe) groups are substituted with ethylthiocarbamato (–NN=C(S)OEt) groups and/or when the 2,4-butanedione backbone is replaced by 1-phenyl-1,2-propandione. Ligand basicity was evaluated by spectroscopic titration in acetonitrile and found to vary systematically across the series. Within the series of complexes the reduction potentials vary over an ∼ 500 mV range and the ligand basicity over ∼ 7 pKa units. Density functional theory (DFT) computations are consistent with experimental changes in redox potential and pKa values across the series of complexes. The results demonstrate a unique example in which electronic properties of the complexes are modulated via small ligand structure variations. The complexes are stable under acidic conditions or upon reduction, but they degrade upon reduction in the presence of acid limiting their application as homogeneous HER electrocatalysts.

Bioinspired Diiron Complex with Proton Shuttling and Redox-Active Ligand for Electrocatalytic Hydrogen Evolution.

A μ-oxo diiron complex, featuring the pyridine-2,6-dicarboxamide-based thiazoline-derived redox-active ligand, H2L (H2L = N2,N6-bis(4,5-dihydrothiazol-2-yl)pyridine-2,6-dicarboxamide), was synthesized and thoroughly characterized. [FeIII-(μ-O)-FeIII] showed electrocatalytic hydrogen evolution reaction activity in the presence of different organic acids of varying pKa values in dimethylformamide. Through electrochemical analysis, we found that [FeIII-(μ-O)-FeIII] is a precatalyst that undergoes concerted two-electron reduction to generate an active catalyst. Fourier transform infrared spectrum of reduced species and density functional theory (DFT) investigation indicate that the active catalyst contains a bridged hydroxo unit which serves as a local proton source for the Fe(III) hydride intermediate to release H2. We propose that in this active catalyst, the thiazolinium moiety acts as a proton-transferring group. Additionally, under sufficiently strong acidic conditions, bridged oxygen gets protonated before two-electron reduction. In the presence of exogenous acids of varying strengths, it displays electro-assisted catalytic response at a distinct applied potential. Stepwise electron-transfer and protonation reactions on the metal center and the ligand were studied through DFT to understand the thermodynamically favorable pathways. An ECEC or EECC mechanism is proposed depending on the acid strength and applied potential.

Ambient Electroreductive Carboxylation of Unactivated Alkyl Chlorides and Polyvinyl Chloride (PVC) Upgrading.

Electrosynthesis of alkyl carboxylic acids upon activating stronger alkyl chlorides at low-energy cost is desired in producing carbon-rich feedstock. Carbon dioxide (CO2), a greenhouse gas, has been recognized as an ideal primary carbon source for those syntheses, and such events also mitigate the atmospheric CO2 level, which is already alarming. On the other hand, the promising upcycling of polyvinyl chloride to polyacrylate is a high energy-demanding carbon-chloride (C-Cl) bond activation process. Molecular catalysts that can efficiently perform such transformation under ambient reaction conditions are rarely known. Herein, we reveal a nickel (Ni)-pincer complex that catalyzes the electrochemical upgrading of polyvinyl chloride to polyacrylate in 95 % yield. The activities of such a Ni electrocatalyst bearing a redox-active ligand were also tested to convert diverse examples of unactivated alkyl chlorides to their corresponding carboxylic acid derivatives. Furthermore, electronic structure calculations revealed that CO2 binding occurs in a resting state to yield an η2-CO2 adduct and that the C-Cl bond activation step is the rate-determining transition state, which has an activation energy of 19.3 kcal/mol. A combination of electroanalytical methods, control experiments, and computational studies were also carried out to propose the mechanism of the electrochemical C-Cl activation process with the subsequent carboxylation step.

Recovery of europium from E-waste using redox active tetrathiotungstate ligands

Rare-earth elements (REEs) are critical to our modern economy, yet their mining from natural ores bears a profound environmental impact. Traditional separation techniques are chemical and energy-intensive because their chemical similarities make REEs very challenging to purify, requiring multiple extraction steps to achieve high purity products. This emphasizes the need for sustainable and straightforward separation methods. Here we introduce a strategy for the direct separation of europium (Eu) from complex mixtures under ambient conditions, leveraging on the redox non innocence of purely inorganic tungsten tetrathiolate (WS42−) ligands. The recovery of Eu is achieved upon reduction of Eu(III) to a Eu(II) coordination polymer, driven by an induced internal electron transfer from the tetrathiotungstate ligand. Applying this strategy to unconventional feedstock such as spent energy-saving lamps allows selective europium recovery with separation factors over 1000 and recovery efficiency as high as 99% without pre-treatment of the waste.

Introducing Novel Redox-Active Bis(phenolate) N-Heterocyclic Carbene Proligands: Investigation of Their Coordination to Fe(II)/Fe(III) and Their Catalytic Activity in Transfer Hydrogenation of Carbonyl Compounds.

A simple and efficient procedure for synthesizing novel pincer-type tridentate N-heterocyclic carbene bisphenolate ligands is reported. The synthesis of pincer proligands with N,N'-disubstituted imidazoline core, 5 and 6, was carried out via triethylorthoformate-promoted cyclization of either N,N'-bis(2-hydroxy-3,5-di-tert-butylphenyl)cyclohexanediamine, 3, or N,N'-bis(2-hydroxyphenyl)cyclohexanediamine, 4, in the presence of concentrated hydrochloric acid. Cyclic voltammograms of the ligands revealed ligand-centered redox activity, indicating the noninnocent nature of the ligands. The voltammograms of the ligands exhibit two successive one-electron oxidations and two consecutive one-electron reductions. In contrast to previous reports, the redox-active ligands in this study exhibit one-electron oxidation and reduction processes. All products were thoroughly characterized by using 1H and 13C NMR spectroscopy. The base-promoted deprotonation of the proligands and subsequent reaction with iron(II) and iron(III) chlorides yielded compounds 7 and 8. These compounds are binuclear and tetranuclear iron(III) complexes that do not contain carbene functional groups. Complexes 7 and 8 were characterized by using elemental analysis and single-crystal X-ray crystallography. At low catalyst loadings, both 7 and 8 exhibited high catalytic activity in the transfer hydrogenation of selected aldehydes and ketones.

Conformational and Substitution Effects on the Donor and Reducing Strength of Tin(II) Porphyrinogens.

Meso-octaalkylcalix[4]pyrrolates are a class of redox-active porphyrinogen ligands. They have been well established in d- and f-block chemistry for over three decades but have only recently been introduced as ligands for p-block elements. Here, we present a study on the influence of meso-substituents on the redox chemistry of calix[4]pyrrolato stannate(II) dianions [2R]2- (R=Me, Et). Expansion of the normal-mode structural decomposition (NSD) method, well known for porphyrin chemistry, provides insights into the ligand conformation of a calix[4]pyrrolato p-block complex. Combined with the results of spectroscopic donor scaling, electrochemical studies, and quantum mechanical bond analysis tools, subtle but significant substitution and conformational effects on the electronic structure are revealed. Exploiting this knowledge rationalizes the role of this class of tin(II) dianions to act as potent reducing agents, but can also be expanded for other central elements. Photoexcitation boosts this reactivity further, allowing for the reduction of even challenging chlorobenzene.