Red Pigment Research Articles

Coconut husk waste products valorization for fabrication of luminescent titanium dioxide NPs as powerful tool for photodecomposition and food born infection: A sustainable strategy.

Fabricating metal oxide nanoparticles has garnered much attention lately because creating safe chemicals, sustainable materials, economic processes, and renewable resources is becoming increasingly important. This research shows how TiO2 nanoparticles (NPs) could be generated in an ecologically responsible way using waste coconut husk with the help of tender coconut. This extract functions as both a reducing agent and a sealing agent. The investigation of TiO2 NPs exploited ultraviolet (UV), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and field-emission scanning electron microscopy (FE-SEM) with energy-dispersive X-ray (EDX) methods. The germicidal properties of TiO2 NPs against food-borne pathogenic strains were studied using the agar well method. Employing Congo red pigment, the photodecomposition behavior was investigated. The TiO2 NPs produced had a crystallite size measuring 16.2nm. The average grain size of the sample, as measured by FE-SEM inspection, falls within the range of 15 to 25 nm. Impressive anti-germ effects against food-borne germs like Gram-positive (Staphylococcus aureus and Listeria monocytogenes), Gram-negative (Salmonella typhimurium and Escherichia coli) bacteria, and fungi (Candida albicans and Aspergillus niger) have been proved by the sustainable fabrication of TiO2 NPs. The catalytic effectiveness of Congo red decreased by 88% after 90 min. The findings suggest that sustainable synthesis of TiO2 NPs is an effective tool for food-borne germicides and photodecomposition behaviors.

Synthesis and Characterization of Red Pigment from Acid Regeneration Plant (ARP) By-product Via Rod Milling Process

Iron o xide waste from acid regeneration plants (ARP) is often discarded due to its non-profitability. This research aims to introduce a value-added process to convert iron oxide waste into red pigment via rod milling process. The iron oxide waste collected from ARP was grinded with a rod milling machine at 30 rpm for 24 hours. The ground product was then mixed with industrial-grade red pigment in various ratios. The mixed samples were then rod-milled again into ultra-fine particles. A total of seven samples were prepared, applied onto a canvas and analysed by energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) methods. From the analyses, the existence, composition, and orientation of iron oxide were established. The waste-derived red pigments were subsequently subjected to particle size analysis on a scanning electron microscopy (SEM) platform, with results showcasing the efficiency of the rod milling process. Colour-related properties of the samples before and after canvas application were investigated using the L*a*b* system with a chromameter. Empirical outcomes indicated that the a* value plays an important role in determining the redness of the sample. Overall, the a* values obtained were above 15 and gradually increased in accordance to the amount of industrial-grade red pigment added. The oil absorptivity of red pigments was also tested via an oil absorptivity test. Notably, the assay signified that particle size and porosity affect the amount of oil that can be absorbed by the pigment.

Serratia marcescens ATCC 274 increases production of the red pigment prodigiosin in response to Chi phage infection

Serratia marcescens is an opportunistic human pathogen that produces a vibrant red pigment called prodigiosin. Prodigiosin has implications in virulence of S. marcescens and promising clinical applications. We discovered that addition of the virulent flagellotropic bacteriophage χ (Chi) to a culture of S. marcescens stimulates a greater than fivefold overproduction of prodigiosin. Active phage infection is required for the effect, as a χ-resistant strain lacking flagella does not respond to phage presence. Via a reporter fusion assay, we have determined that the addition of a χ-induced S. marcescens cell lysate to an uninfected culture causes a threefold increase in transcription of the pig operon, containing genes essential for pigment biosynthesis. Replacement of the pig promoter with a constitutive promoter abolished the pigmentation increase, indicating that regulatory elements present in the pig promoter likely mediate the phenomenon. We hypothesize that S. marcescens detects the threat of phage-mediated cell death and reacts by producing prodigiosin as a stress response. Our findings are of clinical significance for two main reasons: (i) elucidating complex phage-host interactions is crucial for development of therapeutic phage treatments, and (ii) overproduction of prodigiosin in response to phage could be exploited for its biosynthesis and use as a pharmaceutical.

First report of basal stem rot caused by three Fusarium species on Chinese yam in China.

The cultivated variety of Chinese yam (Dioscorea polystachya Turcz. cv. Tiegun) is an economically important plant, capable of producing tubers that are used as food and traditional Chinese medicine. The basal stem rot was found on approximately 65% of yam (tuber expansion stage) in a total of 10 ha field in Wuzhi, Wen, and Hua counties, Henan, China (Sep 2021). Dark brown fusiform lesions initially occurred at the stems basal, irregularly extending to join together and leading to loop-stem necrotic indentation. Three diseased samples from Wuzhi county were collected, cut into 5 × 5 mm pieces, surface sterilized in 75% ethanol (30 s) and 1% NaClO (1 min), washed in sterile water 3 times, and placed on PDA in the dark for 3 days at 28℃. A total of 44 isolates forming three groups of Fusarium colonies were obtained using monosporic isolation, of which 19, 8, and 17 isolates were identified as F. oxysporum, F. solani, and F. proliferatum based on colony morphology, respectively. Typical isolates SYJJ6, 9, and 10 for each group were further studied. The SYJJ6 colonies showed gray white abundant fluffy aerial mycelium with rough edges, formation of ellipsoid, unicellular microconidia without septa, 5.6 to 13.4 × 2.4 to 4.7 μm (n = 50), and sickle-shaped, slightly curved macroconidia with 2 to 4 septa, 14.0 to 23.9 × 3.4 to 5.1 μm (n = 50). Isolate SYJJ9 produced flocculent white colonies, grew in a circular pattern with a sharp edge, forming oval or oblong microconidia with zero or one septum, 11.2 to 18.8 × 3.4 to 6.2 μm (n = 50), and slightly curved macroconidia with 2 to 3 septa, 27.6 to 44.0 × 3.9 to 7.4 μm (n = 50). SYJJ10 produced whitish or pinkish white colonies with fluffy aerial mycelium and a red pigmentation, produced renal or oval microconidia with no septa, 5.1 to 11.8 × 1.8 to 4.2 μm (n = 50), and falcate, slightly curved macroconidia with 3 to 4 septa, 16.1 to 30.2 × 3.1 to 5.9 μm (n = 50). Additionally, TUB, EF-1α, and RPB2 genes were amplified with primers BT2a/BT2b, EF1/EF2, and 5f2/-7cr, respectively (Glass and Donaldson 1995; O'Donnell et al. 1998, 2010). BLASTn analysis on SYJJ6 (OR047663, OR047666, OR047669), SYJJ9 (OR047665, OR047667, OR047670), and SYJJ10 (OR047664, OR047668, OR047671) gene sequences were over 99% identical to those of F. oxysporum (100%, MK432917; 100%, MN417196; 99.61%, MN457531), F. solani (100%, MF662662; 100%, MN223440; 99.80%, CP104055), and F. proliferatum (100%, ON557521; 100%, ON458137; 99.90%, LT841266), respectively. Pathogenicity tests of three isolates were separately performed on 60-day-old yam seedlings. The basal stems were wounded using needle, and the wounds were wrapped with cotton balls soaked with conidial suspension (1 mL, 3×106 conidia/mL) or water (control). Each isolate treated three plants and repeated three times. All plants were grown at 28℃ under a 16/8-h light/dark cycle. Typical symptoms emerged on basal stems at 16, 13, and 17 days after inoculation with the conidia of isolates SYJJ6, 9, and 10, while the control basal stems appeared healthy. The re-isolated fungi were identical to the original three isolates. Fusarium species (F. oxysporum, F. commune, F. humuli, etc.)were previously reported to cause wilt or stem rot on different D. polystachya cultivars (Fang et al. 2020; Li et al. 2023; Zhao et al. 2013), or basal stem rot on Panax ginseng (Ma et al. 2020). This is the first report of Chinese yam basal stem rot caused by Fusarium species, which threatens the production of Chinese yam 'Tiegun' and should be further studied.

Crystal Structure of the Native Chromoprotein from Pleurotus salmoneostramineus Provides Insights into the Pigmentation Mechanism.

The pink-colored protein from the fungus Pleurotus salmoneostramineus (PsPCP) possesses unusual primary sequences with little resemblance to those of known proteins and exhibits a red color in aqueous solution. To understand the pigmentation mechanism of PsPCP, we elucidated the X-ray crystal structure of the native PsPCP. We identified a highly conjugated polyene ligand 2-dehydro-3-deoxylaetiporic acid A as a chromophore ligand, whose solution exhibits yellow. The crystal structure of PsPCP indicated that the ligand is secured in the central cavity and anchored at both termini by hydrophilic interactions and that surrounding residues show CH-pi and C-H···O hydrogen bondings. Geometrical analyses of the bound ligand demonstrated that the conjugated C-C and C═C bonds exhibit similar bond distances. The result indicated enhanced electron delocalization within the conjugated CC bond system, resulting in a redshift of the chromophore ligand. The computational estimates of the UV-vis spectra support the view that the electron delocalization within the conjugated CC bonds system of the bound ligand, induced by the specific ligand geometry within a limited space of PsPCP cavity, is responsible for the red pigmentation of PsPCP. Thus, we propose that the coloring mechanism of PsPCP, which constrains the geometry of a highly conjugated polyene ligand, is a novel type of pigment chemistry.

Total syntheses of borolithochromes H1, H2, I1, and I2.

Total syntheses of borolithochromes H1, H2, I1, and I2, the red pigments isolated from fossils of Jurassic putative red alga Solenopora jurassica, have been achieved. The naphthoquinone possessing a chiral sec-butyl side chain has been synthesized from (S)-2-methylbutanol. The Diels-Alder reaction of the chiral naphthoquinone and the previously reported diene was followed by one pot S-methylation/intramolecular Corey-Chaykovsky reaction/epoxide rearrangement to provide the benzo[gh]tetraphene skeleton. Complexation of the resulting ligand with trimethyl borate and the following O-demethylation furnished a 1:1 mixture of borolithochromes I1 and I2, which were separated by HPLC using CHIRALPAK IC® to afford optically pure borolithochromes I1 (6) and I2 (7). On the other hand, borolithochromes H1 and H2 were not separated by HPLC in our laboratory. Fortunately, the mixture of the methyl ethers of borolithochromes H1 and H2 were separated and O-demethylation with magnesium iodide furnished optically pure borolithochromes H1 (4) and H2 (5).

Syndepositional and diagenetic processes in the pigmentation of Middle Ordovician carbonate red beds in South China

Marine red beds (MRBs) are often attributed to specific redox environments during syndepositional and early diagenetic phases. During the Middle Ordovician, a succession of reddish, deeper-water nodular argillaceous limestones (i.e., Zitai and Kuniutan formations) were deposited along the margin of Yangtze Platform in South China. However, the origin of their color remains enigmatic. In this study, we investigated the Middle Ordovician MRBs from a borehole core newly drilled in the Lower Yangtze area of South China whose stratigraphy frameworks are constrained by carbon isotope and biostratigraphy. This study investigates the pigmentation of these MRBs by integrating petrographic observations, elemental geochemistry, diffusive reflectance spectrometry (DRS), and scanning electron microscope (SEM) coupled with energy dispersive X-ray spectrometry (EDS). DRS results show that the red pigment is caused by hematite particles in submicron- to micron-level size. SEM demonstrates that the hematite grains are either detrital grains with traces of physical transport from terrestrial source, or flaky amorphous hematite aggregates situated within the calcite crystal interstices, implicating both syndepositional and early diagenetic origins, respectively. In terms of the geochemical result of the bulk rocks, the close positive correlation between Al2O3 and Fe2O3 indicates that the iron pigment materials may mainly originate from terrestrial Fe-bearing phyllosilicates. These observations are also consistent with the distribution patterns of rare earth elements (REEs) in carbonate leachates. The MRB limestones are characterized by MREE-bulged patterns and close to ~1 Ce anomalies, suggesting active reductive dissolution and subsequent reprecipitation of iron oxides during diagenesis in pore systems. This study proposes that the coloration of Middle Ordovician MRBs in Lower Yangtze Platform was linked to the enhanced input of terrestrial clay minerals rich in iron. The reductive dissolution released iron ions from terrestrial detrital and allowed subsequent reprecipitation of iron-oxides in pore water system during the fluid-buffered diagenesis. In this light, hematites formed during both the syndepositional and diagenetic processes thus could have involved the coloration of the Middle Ordovician carbonate red beds in this case.

Occurrence of Fusarium Crown Rot Caused by Fusarium culmorum on Winter Wheat in Xinjiang Uygur Autonomous Region, China.

Wheat (Triticum aestivum L.) is the predominant grain crop and plays a pivotal role in grain production in Xinjiang Uygur Autonomous Region (XUAR), China. Its cultivated area constitutes approximately half of the total sown area of grain crops in XUAR, with 1.14 million hectares in 2021. Fusarium crown rot (FCR) of wheat, caused by Fusarium culmorum (W.G. Smith) Sacc., is one of the most devastating soil-borne diseases known to seriously reduce grain yield (Ma et al. 2024; Saad et al. 2023). In 2016, FCR of wheat, caused by F. culmorum, was firstly identified in Henan Province, China (Li et al. 2016). In June 2023, during the investigation of FCR of wheat in Aksu Prefecture, XUAR, FCR on winter wheat (cv. Xindong 20) was found (82.761349°E, 41.612202°N). The grain-filling period for winter wheat in early June coincided with a period of high temperatures and water demand in Aksu Prefecture. Approximately 8% of the Xindong 20 wheat plants exhibited symptoms of white heads and browning at the stem base, with the disease present in 82% of the wheat fields surveyed. To identify the pathogens, 20 samples of diseased stem basal tissue, each 0.5 cm in length, were collected and sterilized with 75% alcohol for 30s and 5% NaOCl solution for 2 min, followed by three rinses with sterile water. These samples were then plated onto potato dextrose agar (PDA) medium at 25°C for 5 days. A total of 17 isolates with consistent morphological characteristics were obtained using single-spore technique, with an isolation rate of 85%. The isolated strains exhibited rapid growth on PDA, producing fluffy, pale-yellow hyphae, and accumulating a pale-yellow to dark red pigment on the bottom of the medium. On carnation leaf agar (CLA), these strains formed orange colonies due to the aggregation of a large number of macroconidia. The macroconidia were short and thick, with three to four septa and rounded apical cell, averaging 31.94 to 40.96 × 5.62 to 6.71 μm (Magnification of ×400). Microconidia were not observed. These morphological characters were consistent with those of F. culmorum (Leslie and Summerell. 2006). Two isolates (D-9 and D-11) were selected for molecular identification. The EF-1α gene fragment was amplified using primers EF1/EF2 (5'-ATGGGTAAGGARGACAAGAC-3'/5'-GGARGTACCAGTSATCATG-3') as previously described by O'Donnell et al. (1998). The two 665 bp PCR products were sequenced and submitted to GenBank (GenBank Accession No: PP763247 and PP763248) with 99. 7% identity to the published F. culmorum sequences (e.g., OP985478, OP985477, MG195126, KX702638). The molecular identification was further confirmed by F. culmorum species-specific PCR primers FcOIF/FcOIR (Nicholson et al. 1998). The expected PCR products of 553 bp were produced only in F. culmorum. Strains D-9 and D-11 were used to conduct the pathogenicity experiment on 7-day-old winter wheat (cv. Xindong 20) using drip in the lower stem inoculation method with a 10-μl of 106 macroconidia ml-1 suspension, and the control 7-day-old winter wheat were treated with sterile water (Xu et al. 2017). The experiments were replicated five times in a greenhouse at temperatures ranging from 20℃ to 25℃. After 4 weeks, all inoculated wheat seedlings showed stem base browning or even death. No symptoms were observed on the control plants. The fungus was reisolated from all inoculated wheat plants by the method described above and identified by morphological and PCR amplification using F. culmorum species-specific primers FcOIF/FcOIR. No F. culmorum was isolated from the control wheat plants, fulfilling Koch's postulates. To the best of our knowledge, this is the first report of F.culmorum causing FCR on winter wheat in XUAR, China. Considering wheat is the predominant grain crop and plays a pivotal role in grain production in China, necessary measures should be taken to prevent the spread of F. culmorum to other regions.

Discovery of pararealgar and semi-amorphous pararealgar in Rembrandt's The Night Watch: analytical study and historical contextualization

This article reports on the discovery of pararealgar and semi-amorphous pararealgar in Rembrandt's masterpiece The Night Watch. A large-scale research project named Operation Night Watch was started in 2019. A variety of non-invasive analytical imaging techniques, together with paint sample research, has provided new information about Rembrandt's pigments, materials, and techniques as well as the current condition of the painting. Macroscopic X-ray fluorescence, macroscopic X-ray powder diffraction and reflectance imaging spectroscopy identified the presence of arsenic sulfide pigments and degradation products of these pigments in the doublet sleeves and embroidered buff coat worn by Lieutenant Willem van Ruytenburch (central figure to the right of Captain Frans Banninck Cocq). Examination by light microscopy of two paint samples taken from this area shows a mixture of large sharp-edged tabular yellow and orange to red pigment particles, and scanning electron microscopy-energy dispersive X-ray analysis identified these particles as containing arsenic and sulfur. Using micro-Raman spectroscopy, the yellow particles were identified as pararealgar, and the orange to red particles as semi-amorphous pararealgar. Synchrotron-based X-ray diffraction allowed visualization of the presence of multiple degradation products associated with arsenic sulfides throughout the paint layer. The discovery of pararealgar and semi-amorphous pararealgar is a new addition to Rembrandt's pigment palette. To contextualize our findings and to hypothesize why, how, and where Rembrandt obtained the pigments, we studied related historical sources. A comprehensive review of historical sources gives insight into the types of artificial arsenic sulfides that were available and suggests that a broader range of arsenic pigments could have been available in Amsterdam in the seventeenth century than previously thought. This is supported by the use of a very similar mixture of pigments by Willem Kalf (1619–1693), a contemporary artist based in Amsterdam. Together with the condition of the particles in the paint cross sections, this brings us to the conclusion that Rembrandt intentionally used pararealgar and semi-amorphous pararealgar, together with lead–tin yellow and vermilion, to create an orange paint.

The Use of Insect Pigment in Art Works.

In this compilation, the focus is on the Cochineal insect (Dactylopius coccus Costa, 1835 (Hemiptera: Dactylopiidae)), a creature native to South America that produces a potent natural red pigment known as "carmine". This pigment, utilized for obtaining the color red, has been an integral part of the art world for thousands of years. Indigenous cultures, in particular, have employed the dye extracted from this insect in the creation of textile dyes and paintings. Moreover, the Cochineal insect and its unique pigments have not only supported artistic expression but also captivated and inspired artists. During the Renaissance period, artists preferred the carmine pigment produced by the females of the Cochineal insect for obtaining bright and vivid red tones. This study delves into the history of the Cochineal insect, its role in art, and its perception in the modern world. Famous paintings created with dyes obtained from the Cochineal insect are discussed, exploring how pigments have found a place in the art world and how artists have utilized this extraordinary source to create distinctive works.

Skin carotenoid scores and metabolic syndrome in a general Japanese population: the Hisayama study

BackgroundHigher vegetable intake is being promoted as an initiative to prevent lifestyle-related diseases. Carotenoids are yellow or red pigment components and are widely present in vegetables. Since ingested carotenoids accumulate in the skin, skin carotenoid levels are a quantitative indicator of vegetable intake. Recently, noninvasive optical sensors for assessing skin carotenoid levels were developed. We here examined the association between skin carotenoid scores measured using optical sensors and the presence of metabolic syndrome.MethodsA total of 1618 individuals (604 men and 1014 women) aged ≥ 40 years (mean age 63.1 years) participated in the study. Skin carotenoid scores were determined using a noninvasive optical sensor based on multiple spatially resolved reflectance spectroscopy. Metabolic syndrome was defined based on the Joint Scientific Statement criteria developed by six international scientific societies. Multivariable-adjusted logistic regression models were used.ResultsThe prevalence of metabolic syndrome was 31.3% (n = 506). A remarkably strong association was found between higher skin carotenoid scores and lower prevalence of metabolic syndrome after adjusting for confounders. The multivariable-adjusted odds ratio for the presence of metabolic syndrome in individuals with the highest quartile of skin carotenoid scores was 0.39 (95% confidence interval, 0.28–0.55) compared to those with the lowest quartile.ConclusionsOur findings suggest that higher skin carotenoid scores measured by non-invasive optimal sensors are significantly associated with a lower likelihood of having metabolic syndrome in the general Japanese population.

Identification of Bacteria Producing Red Pigments and Their Application in the Textile Industry

AbstractIn this study, bacterial strains previously isolated and maintained in a culture collection were evaluated for their pigment production capabilities. The pigments produced by the bacteria were using the methanol extraction method and characterized by thin-layer chromatography, UV–Vis, and Fourier transform infrared spectroscopy (FTIR). In addition, the potential use of these pigments as textile dyes in silk fabrics was investigated. Four of the 270 isolates screened (AS-54, AS-55, AS-67, and AS-75) showed superior pigment production. These isolates were further identified using both classical and molecular methods. Based on the analysis of the 16S rRNA gene region, AS-54, AS-55, and AS-67 were identified as Serratia plymuthica and, AS-75 as Serratia marcescens. Characterization results showed that the pigments exhibited a red coloration, indicating prodigiosin. The dyeing of silk fabrics with these pigments resulted in various shades of pink, highlighting their potential as textile dyes. These results suggest that pigments derived from these bacterial isolates hold great promise for applications in the textile industry.

Comparative omics directed gene discovery and rewiring for normal temperature-adaptive red pigment synthesis by polar psychrotrophic fungus Geomyces sp. WNF-15A

The Antarctic fungus Geomyces sp. WNF-15A can produce high-quality red pigments (AGRP) with good prospects for the use in food and cosmetic area. However, efficient AGRP synthesis relies on low-temperature and thus limits its industrial development. Here genome sequencing and comparative analysis were performed on the wild-type versus to four mutants derived from natural mutagenesis and transposon insertion mutation. Eleven mutated genes were identified from 2309 SNPs and 256 Indels. A CRISPR-Cas9 gene-editing system was established for functional analysis of these genes. Deficiency of scaffold1.t692 and scaffold2.t704 with unknown functions highly improved AGRP synthesis at all tested temperatures. Of note, the two mutants produced comparable levels of AGRP at 20 °C to the wild-type at 14 °C. They also broke the normal-temperature limitation and effectively synthesized AGRP at 25 °C. Comparative metabolomic analysis revealed that deficiency of scaffold1.t692 improved AGRP synthesis by regulation of global metabolic pathways especially downregulation of the competitive pathways. Knockout of key genes responsible for the differential metabolites confirmed the metabolomic results. This study shows new clues for cold-adaptive regulatory mechanism of polar fungi. It also provides references for exploitation and utilization of psychrotrophic fungal resources.

Two novel Pleosporales species isolated from the bark of Acer saccharum.

During a survey of culturable microfungi from the bark of sugar maple (Acer saccharum), Atrocalyx glutinosus and Nigrograna rubescens, two novel species of Pleosporales (Dothideomycetes) were isolated from several locations in eastern Ontario, Canada. Formal species descriptions are presented based on unique colony phenotypes and micromorphological characteristics and supported using multi-locus molecular phylogenetic comparisons with similar species. Both A. glutinosus and N. rubescens produce pycnidial asexual morphs in culture. As their names imply, under specific culture conditions, A. glutinosus excretes large amounts of the glutinous polysaccharide pullulan and N. rubescens produces a dark red naphthoquinone pigment that diffuses in the culture medium. Citation: Mack JN, Sproule A, Shields SW, Seifert KA, Smith M, Overy DP (2024). Two novel Pleosporales species isolated from the bark of Acer saccharum . Fungal Systematics and Evolution 13: 1-14. doi: 10.3114/fuse.2024.13.01.

Workshop on The Use of Miana Leaf Juice (Coleus Scutellarioides (L) Benth) as An Alternative to Safranin Dye in Bacterial Gram Staining

One of the commonly used stains in bacterial identification is gram staining, this staining is used to distinguish the physical properties of the cell wall and the chemical properties of bacteria, this dye will distinguish bacteria into gram-positive bacteria with the result of the bacteria will be purple and gram negative with the result of red bacteria. The use of safranin is effective in working on bacteria because it is alkaline, this can cause binding between the chromophore component in the dye and the cytoplasm of bacteria that are basophilic. However, the use of safranin also has a negative impact on health and the environment. Therefore, the need to use materials that are safer for health and the environment, miana leaf juice (Coleus Scutellarioides (L) Benth) can be used as a natural dye to replace safranin. Minana leaves are very easy to find in gardens and are usually ornamental plants, the anthocyanin content in this plant can be used as a color pigment to replace safranin, anthocyanins will produce red to dark red pigments in an acidic atmosphere. The purpose of this community service activity, the community service organized a workshop for students of the Medical Laboratory Technology Study Program, Lubuk Pakam Medical Health Institute, aiming to provide information on the use of miana leaf juice (Coleus scutellarioides (L) Benth) as an alternative to safranin dye in bacterial gram staining. From the results of the service, it can be concluded that the participants can understand the material and the demonstration, this can be seen from the increase in the percentage of understanding both from before 61% to 87% after being given the demonstration and material.

Improvement of <i>in vitro</i> shoot regeneration and flowering from petal explants of <i>Begonia X hiemalis</i> fotsch

Begonias hold significant importance due to their use as culinary plants, medicinal remedies, decorative elements, and high-value crops. This research aims to find new explant materials for regeneration shoots and direct flowering with high frequency. In this study, high-frequency shoot regeneration and in vitro flowering from petal explants of Begonia x hiemalis Fotsch were achieved. Whole petal explants disinfected with an AgNPs solution at 0.5 g/L for 15 min achieved the highest survival rate. The highest shoot regeneration rate reached 86.66%, with 65.33 shoots/explant from ½-petal explants. Direct formation of the flower consists of two different structural forms, including single petal clusters and complete flower buds, with the corresponding flower formation rates of 19.66 petals/explant; 0.53 flower buds/explant, respectively, at the keel of the petals on the MS medium supplemented with 1000 mg/L myo-inositol, 1.0 mg/L BA, 1.0 mg/L NAA, 30 g/L sucrose and 9.0 g/L agar. Interestingly, increasing the concentration of myo-inositol in the culture medium led to the appearance of red-leaf shoots at the highest rate (12.66 shoots/explant), reaching a maximum shoot height of 1.40 cm after 8 weeks of culture. After each subculture, the red color on leaves tended to decrease gradually, and they were in vitro flowered after the second subculture at a rate of 15% and the third subculture at a rate of 10% on medium supplemented with 40 mg/L adenine, 1.0 mg/L NAA, 1.0 mg/L BA, 30 g/L sucrose, 9 g/L agar and 1 g/L activated charcoal. The plantlets regenerated from petal cultures bloomed with standard red pigments, similar to those grown in natural growing conditions.

Evolution of red ceramic pigments: from hazardous compounds to environmentally friendly alternatives

Synthesis of red ceramic pigments is a challenging task in the ceramic industry. Most classic reds are based on severely toxic materials including lead, arsenic, mercury, selenium, and cadmium, which are forbidden in many countries. On the other hand, the red color is super sensitive to the synthesis parameters, heat treatment conditions (atmosphere and temperature), particle size, etc. Therefore, achieving a bright true red shade and its stability at high temperatures is crucial. There has been a massive attempt to find a sustainable high-temperature resistant alternative for these hazardous compounds. Iron oxide is one of the first red pigments in history, but it cannot produce a bright red shade and its color is mostly red-brown. Ce2S3 is another red pigment with a beautiful red color. But it cannot stand the temperature above 350 °C in an oxidizing atmosphere. Doping lanthanides in the perovskites or entrapping the toxic beautiful chromophores in the core-shell structures are among the strategies to achieve safe bright red pigments. This review outlines the recent progress of hazardous classic reds to environmentally friendly ceramic red pigments. Various compounds and dopants, applied to develop sustainable reds, from simple iron-oxides to composites, solid solutions, core-shell structures, or even purified wastes have been covered in this review.

The Adoration of the Magi by Artemisia Gentileschi analyzed with multispectral imaging and XRF technique

The results of non-invasive diagnostic analyses of the painting Adoration of the Magi by Artemisia Gentileschi are presented. It was created in the 1630s to decorate the choir of the Cathedral of San Procolo in Pozzuoli (Naples, Italy).Multispectral imaging at different wavelengths (VIS, IR and UV) and X-ray fluorescence (XRF) were used. The data were integrated and compared with the art historical literature on Artemisia’s activity, especially in Naples after 1630. The research aims to identify the artist’s palette, the materials used, including in the restoration, and the possible influence on the use of color by artists working in Naples at the time. This will enrich the scientific details of the painting and the literature on the famous painter.The UVF (ultraviolet induced visible fluorescence) images show darker areas on the surface, such as retouching, while the IR image highlights dark outlines that could be traces of brushstrokes and painterly changes.The XRF technique, together with IRFC (infrared false color) imaging, suggested the pigments and materials used for the paint and preparatory layers. Calcium, strontium, lead and iron were identified as the main characteristic elements of the ground layer. Smalt was suggested for the various shades of blue due to the presence of cobalt in combination with pigments based on ultramarine blue, copper or lead white. Traces of mercury were detected in the red areas, suggesting the use of vermilion with other red pigments. Antimony was found in the yellow areas, indicating the use of Naples yellow, a pigment known to have been used by Artemisia only when she worked in Naples.Macro-XRF showed that the finger of one hand was made twice. In the first version, lead was detected, while in the second, this element is present together with mercury. Titanium and zinc indicate that the area investigated was restored.

Flower color modification in Torenia fournieri by genetic engineering of betacyanin pigments

BackgroundBetalains are reddish and yellow pigments that accumulate in a few plant species of the order Caryophyllales. These pigments have antioxidant and medicinal properties and can be used as functional foods. They also enhance resistance to stress or disease in crops. Several plant species belonging to other orders have been genetically engineered to express betalain pigments. Betalains can also be used for flower color modification in ornamental plants, as they confer vivid colors, like red and yellow. To date, betalain engineering to modify the color of Torenia fournieri—or wishbone flower—a popular ornamental plant, has not been attempted.ResultsWe report the production of purple-reddish-flowered torenia plants from the purple torenia cultivar “Crown Violet.” Three betalain-biosynthetic genes encoding CYP76AD1, dihydroxyphenylalanine (DOPA) 4,5-dioxygenase (DOD), and cyclo-DOPA 5-O-glucosyltransferase (5GT) were constitutively ectopically expressed under the cauliflower mosaic virus (CaMV) 35S promoter, and their expression was confirmed by quantitative real-time PCR (qRT-PCR) analysis. The color traits, measured by spectrophotometric colorimeter and spectral absorbance of fresh petal extracts, revealed a successful flower color modification from purple to reddish. Red pigmentation was also observed in whole plants. LC-DAD-MS and HPLC analyses confirmed that the additional accumulated pigments were betacyanins—mainly betanin (betanidin 5-O-glucoside) and, to a lesser extent, isobetanin (isobetanidin 5-O-glucoside). The five endogenous anthocyanins in torenia flower petals were also detected.ConclusionsThis study demonstrates the possibility of foreign betacyanin accumulation in addition to native pigments in torenia, a popular garden bedding plant. To our knowledge, this is the first report presenting engineered expression of betalain pigments in the family Linderniaceae. Genetic engineering of betalains would be valuable in increasing the flower color variation in future breeding programs for torenia.

Production and Extraction of Red Bioactive Pigment from Streptomyces griseorubiginosus and Formulation of Bio-Lip Balm

Production and Extraction of Red Bioactive Pigment from Streptomyces griseorubiginosus and Formulation of Bio-Lip Balm