Red LED Light Research Articles

Effectiveness of light-emitting diodes for arsenic and mercury accumulation by Ceratophyllum demersum L.: An innovative advancement in phytoremediation technology

Light Emitting Diodes (LEDs) have emerged as a tool with great potential in the field of phytoremediation, offering a novel approach to enhance the efficiency of plant-based remediation techniques. In this work investigated the influence of LEDs on the phytoremediation of arsenic (As) and mercury (Hg) by Ceratophyllum demersum L., propagated using tissue culture methods. In addition, the biochemical properties of the plants exposed to metal toxicity were examined. Phytoremediation experiments employed concentrations of As (0.01–1.0 mg/L) and Hg (0.002–0.2 mg/L), with application periods set at 1, 7, 14, and 21 days. In addition to white, red and blue LEDs, white fluorescent light was used for control purposes in the investigations. A positive correlation was observed between higher metal concentrations, extended exposure times, and increased metal accumulation in the plants. Red LED light yielded the highest level of heavy metal accumulation, while white fluorescent light resulted in the lowest accumulation level. Examination of the biochemical parameters of the plants, including photosynthetic pigment levels, protein quantities, and lipid peroxidation, revealed a pronouncedly enhanced performance in specimens subjected to red and blue LED illumination, surpassing outcomes observed in other light treatments. The findings of this study introduce innovative avenues for the effective utilization of red and blue LED lights in the realm of phytoremediation research. Thus, the interaction between LEDs, tissue culture, and the phytoremediation process could lead to synergistic effects that contribute to more effective and sustainable remediation strategies.

Therapeutic and fluorescence evaluation of 20% 5-aminolevulinic acid-mediated photodynamic therapy in actinic keratosis

BackgroundActinic keratosis (AK) is a precancerous lesion that occurs in areas that are chronically exposed to sunlight and has the potential to develop into invasive cutaneous squamous cell carcinoma (cSCC). We investigated the efficacy of 20 % 5-aminolevulinic acid-photodynamic therapy (ALA-PDT) with LED red light for the treatment of AK in Chinese patients by examining changes in dermoscopic features, histopathology and fluorescence after treatment. MethodsTwenty-eight patients with fourty-six AK lesions from March 2022 to September 2023 were treated with 20 % ALA, and 3 h later, they were irradiated with LED red light (80–100 mW/cm2) for 20 min. A session of 20 % ALA-PDT was performed once a week for three consecutive weeks, and the dermoscopic, histopathological, fluorescent and photoaging outcomes were measured one week after the treatment. ResultsOne week after ALA-PDT, complete remission (CR) was reached in 53.6 % of patients. The CR of Grade I AK lesions was 100 %, that of Grade II lesions was 71.4 %, and that of Grade III lesions was 38.1 %. There was a significant improvement in the dermoscopic features, epidermal thickness and fluorescence of the AK lesions. The presence of red fluorescence decreased, and there was an association between CR and post-PDT fluorescence intensity. ALA-PDT also exhibited efficacy in treating photoaging, including fine lines, sallowness, mottled pigmentation, erythema, and telangiectasias, and improved the global score for photoaging. There were no serious adverse effects during or after ALA-PDT, and 82.1 % of the patients were satisfied with the treatment. ConclusionAK lesions can be safely and effectively treated with 20 % ALA-PDT with LED red light, which also alleviates photoaging in Chinese patients, including those with multiple AKs. This study highlights the possibility that fluorescence could be used to diagnose AK with peripheral field cancerization and evaluate the efficacy of ALA-PDT.

Modified Painless Photodynamic Therapy for Actinic Keratosis in China

SignificanceAminolevulinic acid photodynamic therapy (ALA-PDT) is an effective treatment for actinic keratosis (AK). However, the pain during illumination usually caused patient to discontinue PDT treatment and resulted lower efficacy. Previous study showed modified painless PDT (M-PDT) with short ALA incubation time and longer irradiation time can reduce pain and preserve the efficacy. If M-PDT worked in AK still need to investigate. ApproachA splie-face controlled clinical study was conducted. Eleven patients with facial AK received C-PDT (conventional PDT) on the left and M-PDT in the contralateral area. The left area was illuminated by a red LED light (a total light dose of 140 J/cm2) after applying the ALA cream for 3 hours; the other had illumination for a total light dose of 288 J/cm2 after applying the ALA cream for 0.5 hours. The primary endpoint was the lesion clearance rate at 1 month. Secondary endpoints included pain scores, the incidence of adverse events, and cosmetic outcomes. ResultsAt one month following 3 treatments, the lesion clearance rate of M-PDT was non-inferior to that of C-PDT (93.1% vs. 86.4%, respectively. The lesion clearance rate of M-PDT to reach 100% clearance earlier than C-PDT for grade I lesions and higher clearance rates for grade III lesions. Moreover, the pain score during illumination was significantly lower for M-PDT than for C-PDT (P < 0.01). Regarding photoaging, the Global Subjective Skin Aging Assessment (GS2A2) score showed that the total and atrophy scores of C-PDT and M-PDT were significantly improved, and M-PDT also reduced discoloration. There was no significant difference in adverse reactions between C-PDT and M-PDT. ConclusionsM-PDT is non-inferior to C-PDT in terms of efficacy for treating AK, resulting in much lower pain scores.

Arduino Based Collision Detection and Avoidance System

Abstract: In many developing countries the usage of vehicles is increasing. Vehicles became the basic need of people now a days. Approximately 24% of land area on the earth is covered with hills and mountains. As people can’t make straight roads in mountains, they are curvy. In the upgrading countries accident is the major cause of death. If we talk about dangerous roads in the world then all of them are mountain roads and curve roads. The intensity of the deaths are more in curved roads. In the mountain roads there will be narrow roads with tight curves. In such kinds of situations the driver of a vehicle cannot see vehicles coming from other side. Because of this problem thousands of people lose their lives each year. while we are talking about mountain roads here other side might be lead to a cliff. The solution for this problem is alerting driver about the vehicle coming from other side. One of the solution is proposed in this paper. We can alert driver by placing Ultrasonic Sensor in one side of the road before the curve and keeping LED light other side of the curve, so that if vehicle comes from one end of the curve sensor will sense the vehicle and LED light glows at the opposite side as Red. By looking at the Red LED light driver can become alert and can slow down the speed of the vehicle. And still if an accident occurs we can save the life of victim by giving medical assistance immediately. This can increase the survival chances of victim. but this can happen only when we know the exact location of accidental place. This project presents an inexpensive but intelligent framework that can identify and report an accident to the family member

Methylene blue@silver nanoprisms conjugates as a strategy against Candida albicans isolated from balanoposthitis using photodynamic inactivation

Balanoposthitis can affect men in immunocompromised situations, such as HIV infection and diabetes. The main associated microorganism is Candida albicans, which can cause local lesions, such as the development of skin cracks associated with itching. As an alternative to conventional treatment, there is a growing interest in the photodynamic inactivation (PDI). It has been shown that the association of photosensitizers with metallic nanoparticles may improve the effectiveness of PDI via plasmonic effect. We have recently shown that the association of methylene blue (MB), a very known photosensitizer, with silver prismatic nanoplatelets (AgNPrs) improved PDI of a resistant strain of Staphylococcus aureus. To further investigate the experimental conditions involved in PDI improvement, in the present study, we studied the effect of MB concentration associated with AgNPrs exploring spectral analysis, zeta potential measurements, and biological assays, testing the conjugated system against C. albicans isolated from a resistant strain of balanoposthitis. The AgNPrs were synthesized through silver anisotropic seed growth induced by the anionic stabilizing agent poly(sodium 4-styrenesulfonate) and showed a plasmon band fully overlapping the MB absorption band. MB and AgNPrs were conjugated through electrostatic association and three different MB concentrations were tested in the nanosystems. Inactivation using red LED light (660 nm) showed a dose dependency in respect to the MB concentration in the conjugates. Using the highest MB concentration (100 µmol⋅L−1) with AgNPr, it was possible to completely inactivate the microorganisms upon a 2 min irradiation exposure. Analyzing optical changes in the conjugates we suggest that these results indicate that AgNPrs are enhancers of MB photodynamic action probably by a combined mechanism of plasmonic effect and reduction of MB dimerization. Therefore, MBAgNPrs can be considered a suitable choice to be applied in PDI of resistant microorganisms.

Can LED Lighting Be a Sustainable Solution for Producing Nutritionally Valuable Microgreens?

With its quality, intensity, and photoperiod, light is a decisive abiotic factor that directly influences plant biomass and the accumulation of specialized metabolites (SMs). Photosynthetically active radiation (PAR) has significant effects on primary and secondary plant metabolism and thus influences the morphological characteristics of plants and their antioxidant systems. The aim of this study was to investigate the effects of blue, red, and a 50:50 combination of blue and red LED lighting on the SM content in broccoli, mustard, and garden cress microgreens grown in an indoor farm using the zero-acreage farming technique (ZFarming). This research aims to provide valuable insights into the optimization of light spectra to improve the nutritional quality of microgreens, with a focus on sustainable and space-saving cultivation methods. After eight days, the samples were cut in the cotyledon phenophase and analyzed in a fresh state. The microgreens grown under the blue spectrum LED lighting had the highest content of ascorbic acid (112.70 mg·100 g fw−1), total phenolics (412.39 mg GAE·100 g fw−1), and the highest antioxidant capacity (2443.62 µmol TE·L−1). The results show that the highest content of SMs in all the studied microgreens species was accumulated under the blue spectrum LED lighting. This study underlines the favorable influence of the blue spectrum (400–500 nm) on the nutrient content, especially the enhancement of SMs, in the microgreens investigated. Furthermore, the use of supplemental LED lighting proves to be a sustainable and effective means of producing microgreens with superior nutritional properties through the innovative practice of the zero-acreage farming technique.

Melatonin injection and red light irradiation affect the antioxidant response and cell damage in disk abalone (Haliotis discus hannai) exposed to high water temperatures.

The effects of red light-emitting diode (LED) light irradiation (630 nm, 0.5 W/m2) and melatonin (10-8 and 10-7 M) on oxidative stress and physiological responses in abalones exposed to high temperatures (28°C) were investigated. Changes in messenger RNA (mRNA) expressions of melatonin receptor (MT-R), heat shock protein 70 (HSP70), and antioxidant enzymes, as well as alterations in H2O2 levels in the hemolymph, were examined. The results revealed that high-temperature-stressed abalones treated with melatonin injections or exposed to red LED light showed a significant increase in MT-R mRNA expression, while HSP70 mRNA expression decreased. Notably, HSP70 mRNA expression levels in the red LED light-irradiated group were similar to those in the group injected with 10-8 M melatonin after 24 h exposure. Abalones treated with melatonin at 20°C or irradiated with red LED light exhibited decreased H2O2 levels and reduced antioxidant enzyme mRNA expression compared with those of the control group. However, the high-temperature environment induced oxidative stress in abalones, leading to increased antioxidant enzyme mRNA expression compared with that under 20°C conditions. Moreover, abalones exposed to high-temperature stress exhibited hepatopancreatic DNA damage, which was attenuated by melatonin treatment or red LED light irradiation. Hence, red LED light reduces oxidative stress, boosts antioxidant enzymes, and alleviates DNA damage in high-temperature-stressed abalones, akin to 10-8 M melatonin treatment. Therefore, considering the practical challenges of continuous melatonin administration to abalones, utilizing red LED light emerges as a practical, effective alternative to protect abalones from oxidative stress compared to 10-8 M melatonin treatment.

Fast-Charging Li4Ti5O12 Anode Driven by Light

Lithium-ion batteries with fast charging capabilities are crucial for widespread adoption of electric vehicles, as they will increase acceptance of the technology and reduce range anxiety for drivers. To achieve this, advanced fast charging technologies and alternative methods to enhance the slow electrochemical processes are desperately required. This study applied light-emitting diode (LED) photo-assisted fast charging to Li4Ti5O12 (LTO), a large bandgap cubic spinel material, to enhance charging speed through electronic-structure coupling. UV LED-generated light irradiation on to the electrode interface boosted the ion diffusion and lithium cation addition by a factor of 1.3 during electrochemical lithiation, resulting in a 30% decrease in charging time under ambient conditions. Red LED light was not effective in accelerating the reaction as it does not provide sufficient energy. The first-principles calculations support the concept that UV illumination generates charges by overcoming the material’s bandgap and effectively reducing it through the introduction of additional titanium defect states.

Generalization and discrimination of inhibitory avoidance differentially engage anterior and posterior retrosplenial subregions.

In a variety of behavioral procedures animals will show selective fear responding in shock-associated contexts, but not in other contexts. However, several factors can lead to generalized fear behavior, where responding is no longer constrained to the conditioning context and will transfer to novel contexts. Here, we assessed memory generalization using an inhibitory avoidance paradigm to determine if generalized avoidance behavior engages the retrosplenial cortex (RSC). Male and female Long Evans rats received inhibitory avoidance training prior to testing in the same context or a shifted context in two distinct rooms; one room that had fluorescent lighting (Light) and one that had red LED lighting (Dark). We found that animals tested in a light context maintained context-specificity; animals tested in the same context as training showed longer latencies to cross and animals tested in the shifted context showed shorter latencies to cross. However, animals tested in the dark generalized their avoidance behavior; animals tested in the same context and animals tested in the shifted context showed similarly-high latencies to cross. We next examined expression of the immediate early gene zif268 and perineuronal nets (PNNs) following testing and found that while activity in the basolateral amygdala corresponded with overall levels of avoidance behaviors, anterior RSC (aRSC) activity corresponded with learned avoidance generally, but posterior RSC (pRSC) activity seemed to correspond with generalized memory. PNN reduction in the RSC was associated with memory formation and retrieval, suggesting a role for PNNs in synaptic plasticity. Further, PNNs did not reduce in the RSC in animals who showed a generalized avoidance behavior, in line with their hypothesized role in memory consolidation. These findings suggest that there is differential engagement of retrosplenial subregions along the rostrocaudal axis to generalization and discrimination.

Brassica microgreens cabbage (Brassica oleracea), radish (Raphanus sativus) and rocket (Eruca vesicaria) (L.) Cav: application of red‐light emitting diodes lighting during postharvest storage and in vitro digestion on bioactive compounds and antioxidant activity

SummaryMicrogreens grow best under light‐emitting diodes (LED), an artificial light source. In this study, LED lights (red, blue and far‐red) were tested on brassica microgreens to see if they induced an increase in bioactive compounds (glucosinolates and phenolics). In vitro digestion also measured bioavailable bioactive compounds in the intestinal phase. LED lights (red, blue and far‐red) were applied for 6 h in storage at 5 °C and 85% RH for 5 days on cabbage (Brassica oleracea), radish (Raphanus sativus) and rocket (Eruca vesicaria (L.) Cav). Red light significantly enhanced ascorbic acid, total phenols, kaempferol and quercetin glycoside concentrations in all three Brassica microgreens and antioxidant activities. Exposure to red LED light increased 4‐methoxyglucobrassicin (cabbage), glucoraphenin (radish), glucoraphanin A and glucoerucin (rocket). Red light stress may have resulted in secondary metabolite production in immature plants. An in vitro digestion showed higher concentrations of phenolic compounds, glucosinolate components and antioxidants in the intestinal phase. Red LED light is recommended as a postharvest treatment for improving cabbage, rocket and radish bioactive compounds.

Strawberry (Fragaria ananassa) seedlings formation under different intensities of violet, blue and red LED light

Introduction. Seedlings formation under controlled conditions is essential for growing species of importance as strawberry. Since the artificial LED lighting technologic has allowed greater control of light, the variation of components such as the wavelength and intensity can be manipulated to form seedlings with different characteristics. However, it is necessary to generate original scientific information for the development of precise and efficient practices on light control. Objective. The aim of the present study was to evaluate the strawberry seedlings formation under different intensities of violet, blue and red LED light. Material and methods. The study was performed in 2020 at the Plant Genetics Laboratory of the Agronomy Department of the Universidad de Guanajuato, in the municipality of Irapuato, in the state of Guanajuato, Mexico. Seeds were recovered from San Andreas cultivar fruits and seedlings were formed under violet, blue and red LED light at high, medium, and low intensities. Color determination of cotiledon area, chroma saturation index and Hue angle were performed. Physiotechnical variables, chemical and antioxidant activity were measured. Results. The most suitable treatments were violet light of high and medium intensities; as well as blue light of high intensity, due to the germination percentage exceeded at least 60 %. Seedlings did not lengthen or thin, presented the largest cotyledons areas and the highest chlorophyll concentrations. In addition, these light treatments consumed 31.2 % less electrical energy on average. Conclusions. Besides the white light, the most suitable treatments for strawberry seedlings formation were violet light at high and medium intensities, as well as blue light at high intensity. It is suggested that the violet and blue light treatments be evaluated in other cultivars to confirm the beneficial effect on the strawberry seedlings. Red light limited germination and the highest antioxidant activity was observed in this treatment.

Evaluation of broiler performance reared under monochromatic light emitting diode (LED) tubes vis-a-vis incandescent light supplemental lighting

This study was conductedto evaluate the effect of different monochromatic LED lightson the performance of broiler chickens. A total of 120 day-old Lohmann Meat (Indian River) broiler chicks were randomly assigned to three treatment groups: incandescent light (control), red LED light and white LED light, with each group consisting of four replicates of 10 chicks. The chicks exposed to LED lighting showed higher average live weight and liveweight gain compared to the control group, while no significant differences(P&gt;0.05)were observed in feed intake, feed conversion ratio and survivability. Carcass yields, including breast, thigh, drumstick, wing, neck, liver, heart, and spleen, were not significantly affected by the different monochromatic lighting sources (P&gt;0.05). However, significant differences(P˂0.05)in the weights of the back and proventriculus were observed between the white LED group and the other treatment groups. These results suggest that LED lighting could serve as a better alternative to incandescent bulbs in broiler houses, with the potential to enhance broiler performance and carcass yield.

COMPARISON OF THE EFFECTIVENESS OF MYOFASCIAL PAIN REDUCTION USING LOW-INTENSITY LASER AND RED LED LIGHT THERAPY IN PATIENTS WITH TEMPORO¬MANDIBULAR JOINT DYSFUNCTION

Introduction: Today, there is a significant prevalence of temporomandibular joint (TMJ) dysfunction, which currently ranges from 21.5 % to 50.5 %. This disease can worsen the patient's quality of life due to the presence of pain, which is the main symptom of this pathology. To reduce the intensity of pain in patients with TMJ dysfunction, low-level laser and red LED light therapy is used. There are a significant number of studies proving clinical efficacy in alleviating the symptoms of TMJ dysfunction using various methods of light therapy, but the number of studies comparing the effectiveness of different light therapy options among themselves is quite limited. The aim of the study was to compare the effectiveness of pain relief and the number of trigger points in patients with TMJ dysfunction using a low-level laser and red LED light. Materials and methods: 60 patients were randomised into 2 groups. Randomisation for patient allocation was performed using Microsoft Excel 2016. Patients of group I received red LED light therapy, radiation sources were applied to the trigger points of the masticatory muscles extracorporeally for 5 minutes. Patients in group II received low-intensity laser therapy for 30 seconds on the trigger points of the masseter muscles extracorporeally. Patients in both study groups received therapy weekly for 4 weeks. The effectiveness of the treatment was assessed by filling out a visual analogue scale (VAS), the number of trigger points of the masticatory muscles and the force of contraction of the masticatory muscles at rest and during tooth contact in patients with temporomandibular joint dysfunction. Results: the VAS scores in group I decreased by 47.02 % from the start of treatment, in group II – by 53.7 %. The number of trigger points in the projection of the masticatory, temporal muscles and parotid region in group I decreased by 62.34 %, in group II – by 72.21 %. According to electromyography, in group I, the amplitude of bioelectrical impulses of the masticatory muscles at rest decreased by 20.58 % on average, and in the state of voluntary teeth clenching – by 22.89 %. In group II, the amplitude of bioelectrical impulses of the masticatory muscles at rest decreased by 25.58 % on average, and in the state of voluntary teeth clenching – by 28.37 %. Conclusions: red LED light therapy and low-level laser therapy reduces pain intensity and the number of trigger points in patients with myofascial pain. Comparison of the effectiveness of red LED light therapy and laser therapy in reducing pain syndrome showed a higher ability of laser therapy to reduce myofascial pain and the number of trigger points in patients with temporomandibular joint dysfunction (p&lt;0.01).

Periodic and Local LED Light Switching Induces Broiler Locomotion.

Wooden breast myopathy and leg weakness are serious problems in the broiler chicken industry. The color and intensity of light in the chicken habitat affect behavior, including walking of chicks. The present study was conducted to determine whether periodic and local light switching induces locomotion and affects wooden breast myopathy and leg weakness in broiler chicks. Thirty five-day-old broiler chicks were assigned to two pens (4.72 m × 0.73 m each). In the control pen, chicks were reared under three white-light emitting diode (LED) lights until they were 42 days old. In the other pen, chicks were reared under a white LED light located in the center, supplemented with blue or red LED lights on either side of the pen. The color of the LED lights changed every 3 h, from blue and red to red and blue. From 21 d of age, all LED lights were changed and only one of the side lights was turned on every 3 h. From 35 d of age, all three white lights were turned on until 42 d of age. Periodic and local color switching and on-off switching significantly induced locomotion in broiler chicks. Wooden breast scores tended to improve with light-switching treatment. The tibia length, diameter, and breaking strength were not significantly affected. This is the first report showing that locomotion may be induced in broiler chicks by periodic and local lighting switching, and may be useful for improving the health status of broiler chicks.

Effect of light and cytokinin on growth and curculin gene expression of Curculigo latifolia on in vitro culture.

Despite being valuable for producing a natural sweetener Curculin, Curculigo latifolia has a low growth and difficult to domestificate. So, to solve this problem, propagation on in vitro culture will be an alternative method to propagated this spesies under different cytokinins and light condition. Cytokinins and light has major role in organogenesis, growth and gene expression of many species. Thus, in this study, we aimed to improve the Curculigo latifolia growth on in vitro condition and expression of curculin gene by combining cytokinins addition and different light exposure. Four weeks seedlings were sub-cultured into medium (MS free hormone) containing 3 mg/L benzyladenine (BA) and various concentrations of meta-Topolin (mT) including 0.1 mg/L, 0.5 mg/L, and 5 mg/L. The cultures then incubated under different light types (red, blue, white LED lights and white fluorescence light) with 16-h light/ 18-h dark photoperiod for 14 weeks at 25 ± 2°C. Several parameters, including plant height, leaf number, chlorophyll contents, stomatal structure, and density and curculin expression, were observed every week. Unexpectedly, our results showed that C. latifolia growth displayed significant improvement when it was treated under white LED light without any additional cytokinins. In sum, white LED light further improves plantlets phenotype, such as plant height, leaf number, chlorophyll production, and stomatal number and structure, whereas, red LED light lead to a decreased phenotypes but increase the curculin gene expression.

Near-IR nanolignin sensitizers based on pyrene-conjugated chlorin and bacteriochlorin for ROS generation, DNA intercalation and bioimaging.

Near-infrared (NIR) fluorescent agents are extensively used for biomedical imaging due to their ability for deep tissue penetration. Tetrapyrrole-based photosensitizers are promising candidates in this regard. Further, the extended conjugation of such macromolecules with chromophores can enhance their fluorescence efficiency and DNA intercalation ability. Herein, pyrene-conjugated NIR photosensitizers, such as chlorin (PyChl) and bacteriochlorin (PyBac), were synthesized from the corresponding pyrene-porphyrin (PyP). The correlation between the theoretical and experimental optical properties (absorption and fluorescence spectroscopy results) was determined using the DFT/TD-DFT computational approach. Next, studies on the photophysical properties, reactive oxygen species (ROS) production, and DNA binding were conducted on these macrocycles to study the effect of pyrene conjugation on the pyrrolic ring. Furthermore, each photosensitizer was loaded into lignin nanoparticles (LNPs) using the solvent-antisolvent method to accomplish fluorescence-guided imaging. The developed near-IR chlorin- and bacteriochlorin-doped lignin nanocarriers (PyChl-LNCs and PyBac-LNCs) exhibited significant in vitro singlet oxygen generation upon red LED light exposure. Moreover, these macrocycle-loaded nanolignin sensitizers showed good fluorescence-guided bioimaging with fungal cells (Candida albicans). Further, the nanoprobes exhibited pH-dependent release profiles for biological applications. These nanolignin sensitizers demonstrated promising potential to be utilized in near-IR image-guided photodynamic therapy.

Designing Prototype of Volume Detector for Medical Oxygen Cylinder Using NodeMCU ESP8266

The COVID-19 pandemic posed significant challenges to the healthcare sector, particularly due to the imbalance between patient numbers and available medical staff, resulting in difficulties during emergencies. One such challenge was the prompt replacement of oxygen cylinders. Leveraging Internet of Things (IoT) technology, we developed a prototype oxygen cylinder volume detector aimed at providing early notifications to healthcare professionals. This prototype incorporates the NodeMCU ESP8266, equipped with an Infrared (IR) Obstacle Sensor. The sensor communicates with a relay to activate an MP3 module, delivering audible alerts. Furthermore, the NodeMCU ESP8266 system integrates CTBot to send text notifications through the Telegram application to the nearest healthcare personnel. Visual alerts are also provided through red LED lights attached to the cylinders, indicating which oxygen cylinder is approaching depletion. Comprehensive testing validated the proper functionality of all system components. This innovative oxygen cylinder detector prototype is designed to streamline healthcare worker and nurse workflows by offering quicker access to accurate information regarding the status of medical oxygen cylinders. Not only does this enhance patient care efficiency, but it also ensuring the availability of oxygen is crucial for critical patients.

Synthesis of highly porous hybrid nanocomposite of hemp derived carbon nanosheet/carbon nanotube/manganese cobalt oxide for asymmetric supercapacitor

This article outlines a simple and affordable strategy for creating 3D mesoporous structures from biomass. Three-dimensional hemp-derived carbon/carbon nanotube/manganese cobalt oxide hybrid electrode material was successfully fabricated. Derived from natural hemp fibre, such electrodes exhibited rich surface area with improved ion transportation kinetics. In our approach, hemp-based carbon-CNT was synthesized by varying the ratio of hemp and CNT. Finally, a ternary composite was prepared by taking the best ratio of hemp-CNT onto which manganese cobalt oxide was assembled. The synthesized ternary mesoporous material has a surface area of 380.85 m2 g−1 and exhibits outstanding cyclic stability (94%) in 1 (M) TEABF4/DMSO electrolyte, making it an excellent electrode material with a capacitance (Sp.C) of 1083 F g−1 at 1 A g−1. Further, the electrode material was assembled as a cathode in asymmetric supercapacitor and among different electrolytes. Excellent electrochemical performance was obtained in ionic liquid (NHEt3+HSO4−). The fabricated device exhibits a specific capacitance of 62.5 F g−1, energy density of 28 W h kg−1 and power density of 900 W kg. The fabricated asymmetric supercapacitor can power a 1.8 V red LED light for 3 min and 55 s after 30 s of charging. Therefore, this work shows that agricultural biomass can be a viable supercapacitor electrode material.

Effect of LED light on the production of fruiting bodies and nucleoside compounds of Cordyceps militaris at different growth stages of solid-state fermentation

BackgroundTimely harvesting of Cordyceps militaris fruiting bodies and their bioactive compounds can reduce production costs. This study examined the effects of LED treatments on the production of fruiting bodies and nucleoside compounds in C. militaris at different growth stages of solid-state fermentation. MethodsC. militaris was grown on oats under different LED light treatments. Harvested samples were divided into fruiting bodies and fermented oats to dry, grind, extract, and determine the contents of adenosine, cordycepin, and pentostatin during cultivation by high-performance liquid chromatography. Significant FindingsThe highest fruiting bodies yield (6.20 g dw/bottle), biological efficiency (92.75 %), adenosine (2.22 mg/g dw), and cordycepin (2.57 mg/g dw) content in fruiting bodies were achieved on the 56th day under T5 white, LED blue light, LED blue light, and LED red light, respectively. LED white (1.31 mg/g dw), LED blue (1.23 mg/g dw), and LED red (1.25 mg/g dw) lights during days 35 to 42 resulted in the highest pentostatin content in fruiting bodies. Optimal yields of C. militaris fruiting bodies and their nucleoside compounds can be achieved through appropriate LED lighting and timely harvesting.

A biocompatible and flexible supercapacitor for wearable electronic devices

In this work, a supercapacitor (SC) designed for flexible and wearable textile systems operating in environments similar to biological fluids is presented. Supercapacitor electrode (SE) uses electrodes composed of derivatized coumarin poly(3,4-ethylenedioxythiophene)/7-Hydroxy-4-phenyl-2H-chromen-2-one (SE1), poly(3,4-ethylenedioxythiophene)/7-Hydroxy-8-(((1-hydroxy-3-phenylpropan-2-yl)imino)methyl)-4-phenyl-2H-chromen-2-one (SE3) and poly(3,4-ethylenedioxythiophene/Ethyl-2-(((7-hydroxy-2-oxo-4-phenyl-2H-chromen-8-yl)methylene) amino)-3-(4-hydroxyphenyl) propanoate (SE4) in 3.0 M NaCl as the electrolyte. The SE4 shows ultra-high specific capacitance of 2852.6 F g−1 (14.3 F cm−2) at a current density of 1.0 A g−1 (5.0 mA cm−2). The energy and power densities of the symmetric supercapacitor consisting of SE4 were 46.7 Wh/kg and 800.0 W kg−1, respectively for 1.0 V and its specific capacitance is 672.6 F g−1. SC exhibits a capacitance retention of 113.6% by charging/discharging stability (15,000 cycles). Cyclic voltammograms generated by twisting and bending the flexible supercapacitor at various angles (0–180°) are successfully carried out. SC was made that shows the operation of a red LED light when charged with a battery. The device, created through the use of aqueous electrolyte systems such as Na+, Cl− ions, has demonstrated significant performance as a safe and sustainable way to meet the energy and power density requirements in wearable electronic systems.