Rectangular Resonator Research Articles

Fano mode based plasmonic sensor for temperature and chemical pollutant detection

Plasmonic sensors provide great sensitivity to minute quantities of analytes and provide excellent detection. In present context of environmental monitoring, plasmonic sensor can prove to be an excellent choice in chemical pollutant and temperature detection. Plasmonic sensors can provide immediate results, allowing for monitoring temperature changes in ecosystems or climate studies and quick decision-making in emergency situations related chemical pollution incidents. They are compact and can be integrated into portable devices for on-site analysis. In this investigation, a plasmonic refractive index sensor based on key ring shaped resonator consisting of a microring resonator and two rectangular resonator is proposed. Finite-Difference Time-Domain (FDTD) method is used to study the transmittance characteristics of the sensor. The device exhibits quadruple Fano resonance with highest sensitivity of 2521.7 nm/RIU. Other performance parameters such as figure of Merit (FOM), Quality (Q) factor and Detection limit (DL) are also been calculated, with values 98.8 RIU−1, 99.6 and 0.01 respectively. Additionally, the effects of different geometrical configurations is also studied, providing insights into the design principles in context of potential fabrication complexities. Further, the simulated Fano characteristic is validated against the theoretical value. The application of the proposed sensor is investigated for different types of analyte such as chemical pollutants and temperature sensing.

Plasmonic MIM waveguide based FR sensors for refractive index sensing of human hemoglobin

Fano resonance (FR) is a universal phenomenon that is used to attain electromagnetic-induced transparency (EIT), high absorption and sensitivity, and low-power photonic devices. This work presents dual FR refractive index (RI) sensor models on a plasmonic metal-insulator-metal (MIM) waveguide system. The FR phenomenon is attained by including circular and elliptic nanorod defects in the bus waveguides. The resonances originate from the defect's narrow discreteness and the rectangular resonator's broad state. Analytical methods such as finite difference time domain (FDTD) and multimode interference coupled mode theory are adopted to analyze the FRs. The shapes of the Fano line and resonance peak amplitude can be tuned independently by controlling the diameter of the defects, the separation between the defects, and the coupling (between the resonator and the bus waveguide) distance. Moreover, the proposed structures detect the RI (human hemoglobin) variation in the bus waveguide and resonator. The obtained results with circular nanorod defect verify the autocorrelation coefficient of 99.92 %, ensuring the device's linearity and high performance. However, an autocorrelation of 99.7 % is attained by using two elliptic nanorod defects.

Transverse resonance technique for analysis of a symmetrical open stub in a microstrip transmission line

Open stubs in a strip (microstrip) transmission line are one of the most common elements of planar circuits used in numerous devices in the various types of wireless systems. Therefore, the urgent problem is to develop an analyzing method for discontinuities in the form of the open stub in a microstrip transmission line at frequencies at which the high-frequency effects must be considered. In the paper, a technique of scattering characteristics calculating on a symmetrical microstrip open stub by transverse resonance method is presented. Boundary value problems for a rectangular volume resonator based on a microstrip transmission line with a symmetric open stub are solved for the three options boundary conditions in the symmetry plane and on the longitudinal boundaries. The intersection of the spectral curves obtained by the numerical solution of the “electric” and “magnetic” boundary value problems determines the minima of a reflection or transmission coefficients of fundamental wave on discontinuities. To algebraize the boundary value problems for the eigen frequencies of volume resonator with discontinuity, the corresponding two-dimensional functions of the magnetic potential are constructed, through which the components of the current density on the strip are determined. The functions of magnetic potential were defined by decomposing them into expansion by Fourier series, which ensures stable convergence of the series and numerical calculation algorithm. The developed technique has been tested by calculating the eigenfrequency spectra of an open microstrip stub using the transverse resonance method on the example of an open stub in a microstrip transmission line with a resonant frequency of about 3.0 GHz. Also, a technique for numerical solutions of “electric” and “magnetic” boundary-value problems for resonators with two electrodynamically coupled symmetric open stubs in a microstrip transmission line is developed.

Ultra-wideband bandpass microstrip filter with electronically tunable notch-band

This paper introduces a compact ultra-wideband (UWB) microstrip filter featuring both a fixed and an electronically tunable notch band. Operating within the frequency range of 3.27 GHz to 5.61 GHz, the filter incorporates a permanent notch at 4.08 GHz and a tunable notch at 4.88 GHz. Utilizing a traditional ground plane and a short-circuited transmission line, we develop a bandpass filter with a stable notch-band positioned and another tunable notch band. Systematic defects are made to the ground plane to increase the coupling between input and output ports leading to UWB response. The stable notch band is created using a rectangular slot resonator, while the tunable notch employs a varactor diode (NXP BB135 Varactor Diode) integrated into a rectangular stub. Operating in the even-mode with symmetrical current distribution, the filter exhibits a -3dB passband bandwidth of 740 MHz, 610 MHz, and 240 MHz across its respective passbands. Notch band attenuation measures at -10 dB and -9 dB, respectively. Experimental results from the prototype demonstrate excellent agreement with simulated results, confirming the efficacy of the design.

Theoretical investigation of enhanced terahertz metamaterial absorber integrated with blocked-impurity-band detector

Blocked-impurity-band (BIB) device becomes a prevalent terahertz detection technology, but its overall optical performance, such as quantum efficiency, is constrained by the thickness of the absorption layer. Metamaterial absorbers can effectively concentrate and absorb terahertz waves at a subwavelength scale, and their ultra-thin thickness facilitates device integration. A multi-band metamaterial absorber is developed and simulated tailored for the working band of Ge-doped BIB detectors. The design is founded on a three-layer structure with Ti rectangular resonator, Ge dielectric layer, and Ti reflective layer. This configuration achieves two absorption peaks at 74.16 μm and 92.09 μm, with optical absorption reaching 95.66% and 97.29%, respectively. The operating wavelength can be regulated by altering the geometric parameters of the rectangular resonator, and it exhibits angle-insensitive properties under small-angle incidence. These findings enhance the application of BIB detectors in terahertz detection technology, potentially improving their performance in deep space exploration.

Realization of all-optical logic gates using MIM waveguides and a rectangular ring resonator

In this study, all-optical OR, exclusive OR (XOR), NOR, XNOR, AND, NAND, and NOT logic gates using metal-insulator-metal (MIM) waveguides with a rectangular ring resonator are designed and analyzed. The structure has a silver plate with three input waveguides, one output waveguide, and a rectangular ring resonator. One of the input ports is used as a control port. The finite-difference time-domain (FDTD) method is utilized to obtain the optical spectrum of the proposed structures. To realize all-optical logic gate properties of the designed structures, optical signals with the same phase or different phases are passed through the waveguides. Transmission spectrum (T), contrast ratio (CR), and modulation depth (MD) parameters are obtained to determine the performances of all-optical logic gates. To determine the logic 1 (ON) and logic 0 (OFF) states of the output ports, the threshold transmission value is accepted as 0.23 for all-optical logic gates. For the proposed designs, the highest transmission, contrast ratio, and modulation depth values are 217%, 6.75 dB, and 100%, respectively. The structure also supports a data rate of 24 Tb/s. The designed optical logic gates have valuable features for developing high-performance optical devices.

Multiple Fano Resonance Modes based Plasmonic Refractive Index Sensor for Edible Oil Adulteration Detection

Surface plasmon polariton (SPP)-based plasmonic sensors are increasingly replacing traditional bulky sensors in refractive index sensing, biosensing, food adulteration detection, and other applications due to their unique optical features and different Metal-Insulator-Metal (MIM) topologies. The present research introduces a new design for a highly sensitive MIM waveguide-based refractive index sensor. This design incorporates an innovative combination of an inverted U-shaped rectangular split-ring resonator (RSRR), a semi-circle-split-ring resonator (SCSRR), and a stub. The sensor’s wave-guiding capabilities, such as electromagnetic wave transmission, field profile distribution, and sensitivity, are meticulously analyzed using a two-dimensional finite-element method. The key objective of this device is to identify slight differences in the refractive index by observing shifts in resonant wavelength through the light’s interaction with the plasmonic structure. Moreover, optimizing the geometric parameters significantly enhances the sensor’s performance. The optimized sensor achieves a maximum refractive index sensitivity of 2400 nm/RIU, a figure of merit (FOM) of 45.28, and a Q-factor of 39.86, as demonstrated by simulation results. Further investigations reveal the MIM structure’s capacity to detect adulteration in edible oils, underscoring the sensor’s adaptability and its potential for widespread biosensing applications.

MEMS reconfigurable terahertz meta-absorber with polarization-dependent and sensing characteristics

This study presents and demonstrates a design of a micro-electro-mechanical system (MEMS) reconfigurable terahertz (THz) metamaterial absorber (TMA) that shows tunable free spectra range with a maximum value as 166 GHz in transverse magnetic mode and switchable resonance from 1.24 THz to 1.53 THz. The unit structure of TMA consists of two movable rectangular resonators aside and an x-shaped resonator at the center comprising two c-shaped resonators connected upside down. The material configuration of TMA is typical of the metal–insulator-metal sandwich configuration. That is a bottom Au layer preventing the penetration of the THz wave, a dielectric SiO2 layer to accommodate and absorb the incident wave, and a patterned Au structure array to select the resonant frequency. The electromagnetic response of TMA could be flexibly modulated when the structure is reconfigured by changing the gaps between x-shaped resonators and rectangular resonators based on the MEMS platform. Meanwhile, owing to the asymmetry of resonant structure, the electromagnetic response of TMA could be tuned from single-, dual-, triple- quad-resonances by varying the polarization state of incidence. Furthermore, the sensitivity of TMA is explored and demonstrated with remarkable linearity under a variation of the surrounding environment refractive index from 1.0 to 2.0. The feasibility of TMA is validated as the experimental absorption spectra are well meet the simulation results. The above results indicate the proposed TMA possesses great potential applications in multiple resonance switches, polarization switches, and highly efficient environmental sensors.

Highly compact UWB-MIMO antenna with sharp multi-stop band characteristics

With multi-band rejection characteristics, a new low-profile antenna of size 34 × 34 mm2 is conferred in this article. It consists of quad identical monopole elements (originated orthogonally), contributing ultra-wideband characteristics in the system. The single unit of the proposed design consists of a modified spinning-top shape radiator (MSTSR), excited by a tapered microstrip line feed (TMLF) and semi-circular ground. An excellent bandwidth of 3–12.9 GHz (where S11 < − 10 dB) is obtained at each port. By inserting the structure of four spiral coils, a sharp notch ranging from 7.9 to 8.5 GHz is achieved to filter the X-band satellite communication uplink. In addition, a circular spiral slot in the radiator near the ground plane creates a stop band at 7.35–7.565 GHz band (satellite communication downlink band). Furthermore, symmetrical rectangular trapezoid resonators and inverted symmetrical rectangular trapezoid structures near the feed line are responsible for the elimination of interferences at 5.5 GHz lower WLAN and 3.5 GHz WiMAX respectively. The FR-4 substrate used for the UWB-MIMO design fabrication process and fabricated results are found in good match with the simulated results. Also, the design provides good performance metrics such as total active reflection coefficient, diversity gain, channel capacity loss, isolation, and envelope correlation coefficient.

A compact quad element human face‐shaped wideband MIMO antenna for 5G applications

SummaryThis article presents a quad element wideband multiple‐input multiple‐output (MIMO) antenna consisting of human face‐shaped patch radiators with defected ground structure (DGS) having rectangular split ring resonator (RSRR) in ground surface. The measured bandwidth of the proposed MIMO antenna is 3.0–6.5 GHz, and the isolation between the ports is more than 16 dB. Additionally, simulated diversity characteristics like the channel capacity loss (CCL), channel capacity (CC), total active reflection coefficient (TARC), mean effective gain (MEG), and envelope correlation coefficient (ECC) are investigated with the measured value and observed to be within the acceptable ranges over the operating frequency band. The suggested antenna can be used in the wireless local area network (WLAN) (i.e., 4.9–5.725 GHz), wireless fidelity (Wi‐Fi) (i.e., 5.15–5.85 GHz), and 5G under 6 GHz (3.3–5.0 GHz) frequency ranges.

Temperature and refractive index sensor based on perfect absorber in InSb double rectangular ring resonator metamaterials

InSb is an important semiconductor material in the field of optoelectronic devices due to its high electron and hole mobility, low effective mass, and low energy gap at room temperature. In this paper, a thermally controlled dual-band terahertz metamaterial absorber with a patterned InSb film is designed and studied. The unit cell of the proposed metamaterial is composed of combined InSb double rectangular ring resonators (DRRR) adhered on a continuous gold layer and substrate. Finite-difference-time-domain (FDTD) simulation results demonstrate that the absorption peak can reach 98.95 %, and 99.45 % at 1.499 THz and 1.592 THz when the external environment temperature is 283 K. Electric field distribution and parameter sweep indicate the two absorption peaks result from the near-field coupled linear superposition between the big square and small square resonators. The proposed absorber not only has the features of wide incident-angle stability, but also polarization insensitivity. Besides, the proposed absorber shows temperature-tunable features due to the temperature-dependent variation of the permittivity of InSb material. The InSb pattern proposed in this paper provides an alternative method for designing of dual parameters sensor in the terahertz band, the proposed dual-band absorber can function as a temperature sensor with sensitivities of about 8.6 GHz/K and 12.8 GHz/K, respectively. The proposed dual-band absorber can also be used as a refractive index sensor with sensitivities of about 1.065 THz /RIU, and 0.499 THz /RIU, respectively. Therefore, the present work provides an effective method for implementing thermally and refractive index sensors in the terahertz range.

Terahertz metal-graphene hybrid metamaterial for active manipulation of electromagnetically induced transparency

The dynamic tuning of terahertz (THz) electromagnetically induced transparency (EIT) offers significant potential in rapidly changing THz regulation fields, such as the next generation wireless communication, switching, and sensing. In this work, we demonstrate a THz EIT metamaterial by combining a circular and a rectangular split-ring resonator (CSRR and RSRR) based on the bright-bright mode coupling. The introduction of graphene into the EIT structure enables active tuning, and reveals two distinct regulation mechanisms in the metal-graphene hybrid EIT metamaterial: 1. the internal coupling effect diminishes with the increase of the Fermi level in the CSRR-graphene integration; 2. the surface electric field undergoes redistribution in the RSRR-graphene integration. These two dynamic regulation mechanisms are well confirmed by the simulated electric field distribution. As a result, the transmittance within the EIT window of the hybrid metamaterial can be precisely modulated, exhibiting a significant modulation depth of >85%. Notably, the integration with graphene in the RSRR allows for simultaneous modulation of resonances on either side of the EIT peaks, which expands more THz modulation channels. This work enriches the design and implementation methods for active THz EIT and shows potential applications in THz dynamic application scenarios.

Wearable flexible Kapton-graphene electromagnetic sensors

This research is dedicated to the development of a new technology for a quick diagnosis of virial virus, using electromagnetic technology facilitated by either a Rectangular Patch Resonator (RPR) or a Wearable Flexible Sensor (WFS) designed for non-invasive viral disease detection, including Nano-virus, and macro-virus. These devices is tailored for a precise and non-invasive detection of a wide array of viruses. To enhance diagnostic precision, an electromagnetic sensor was meticulously explored and simulated, to be capable of detecting and identifying even the most minuscule viruses. Employing numerical modeling with a focus on the 10 GHz to 20 GHz frequency range. We hold a strong sense of optimism regarding this sensor's potential for non-invasive virus detection. Extensive simulations conducted throughout this study have underscored the WFS's selectivity across all viruses, boasting an exceptional limit of detection and sensitivity. Moreover, the WFS exhibited the capability to distinguish between varying infection percentages, each corresponding to a distinct reflection pattern.

Sensor and slow light based on plasmon-induced transparency in carbon nanotube rectangular split-ring resonator metamaterials

Sensor and slow light based on plasmon-induced transparency in carbon nanotube rectangular split-ring resonator metamaterials

Boosting Second Harmonic Generation Efficiency and Nonlinear Susceptibility via Metasurfaces Featuring Split-Ring Resonators and Bowtie Nanoantennas.

This work investigates a metasurface design to achieve remarkable second harmonic generation (SHG) conversion efficiency and enhance effective nonlinear susceptibility using the finite element method. The elements of the designed structure are composed of a rectangular split-ring resonator Ag film, a bowtie-shaped Ag nanoantenna, and a pair of Bi bars that induce nonlinear optical phenomena due to the nonuniform distribution of the electric and magnetic fields within the device surface. The simulation results agree perfectly with the theory and demonstrate outstanding achievements in terms of SHG conversion efficiency (η) and effective nonlinear susceptibility (χeff(2)). Specifically, the metasurface reaches a peak η value of 4.544×10-8 and an effective nonlinear susceptibility of 3.4×104 pm/V. This work presents a novel and versatile design to achieve high η and χeff(2) in an SHG metasurface.

Analysis and design of a wide stop‐band and high out‐of‐band suppression BPF

AbstractThis paper proposes a wide bandpass filter (BPF) with high out‐of‐band suppression and wide stop‐band characteristics. An interdigital coupled line structure loaded by a rectangular resonator ring is employed to generate three transmission poles in the pass‐band and an additional transmission zero (TZ) in the stop‐band, thereby achieving a wider pass‐band while enhancing stop‐band suppression. Compared to traditional coupled‐line structures, the structure mentioned in this paper offers significant advantages in designing filters with wide stop‐bands and high out‐of‐band suppression. Furthermore, open‐circuit T‐stub, and a pair of open‐circuit stub are used to generate multiple parasitic TZs at high frequencies, which is adopted to further expand the stop‐band range. Measurement results shows that the insertion loss of the BPF is of −2.86 dB within the range of 7.05–12.20 GHz. The stop‐band ranges from 13 to 48 GHz with an out‐of‐band suppression of −27 dB, especially when the out‐of‐band suppression is −40 dB, the stop‐band frequency range is 16.40–31.35 GHz.

Design of a Microwave Quadrature Hybrid Coupler with Harmonic Suppression Using Artificial Neural Networks

In this paper, a compact and simple structure of an elliptic microstrip lowpass filter (LPF) is designed for harmonic suppression in microwave quadrature hybrid coupler (QHC) applications. A radial resonator and a rectangular resonator are used to produce an elliptic LPF. The proposed LPF is used on the outer sides of the branch line coupler, which has improved the coupler harmonic suppression. Furthermore, artificial neural networks (ANNs) are incorporated to improve the LPF design process. The LPF best structure is obtained using the proposed ANN model. The proposed LPF has a compact size, which only occupies 16.4 mm × 7.3 mm equals to 0.164 λg × 0.073 λg, has a cut frequency of 2.2 GHz, and shows a sharp transmission band with a roll-off rate of 158.3 dB/GHz. Finally, the deigned QHC operates correctly at 1 GHz, which shows high harmonic suppression ability. The proposed QHC provides wide suppression band from 2.25 GHz up to more than 14 GHz, which can effectively suppress 3rd, to 14th harmonics. The proposed coupler features desirable parameters of S11, S21, S31, and S41, with magnitude of −21 dB, −3.4 dB, −3.3 dB, and −22.5 dB, at the operating frequency. The proposed approach mitigates the complexity of the circuit fabrication, compared with the previous methods while achieved desirable performances for the proposed QHC.

Design and optimization of a compact microstrip BPF for wireless communication systems based on open-loop rectangular resonators

In a wireless communication chain, filters play a critical role in ensuring the efficiency, reliability, and overall performance of the system. In fact, filters are essential for selecting specific frequency bands. They can narrow or widen the bandwidth, depending on the requirements of the communication protocol. Appropriate bandwidth management is crucial for optimizing data transmission rates and accommodating multiple channels within the available spectrum. This article describes the design of a compact bandpass filter with two identical rectangular open-loop resonators. The proposed filter frequency response covers the 3.5 GHz global interoperability for microwave access (WiMAX) and fifth generation (5G) applications. The structure of this filter uses the Rogers RO6010 substrate, which has a dielectric constant of 10.2, thickness of 1.27 mm, and tangent loss of 0.0023. The proposed device is intended for wireless communication systems operating at 3.5 GHz. The filter offers a wide bandwidth of 1.21 GHz with a small size of (5.72 × 12.34) mm2, and a low insertion loss of −0.16 dB. The suggested filter offers effective utilization across various applications including fifth-generation (5G), sub-6G, and WiMAX. Simulation and optimization of the proposed design are conducted utilizing the HFSS (High Frequency Structure Simulator) software. To corroborate the results from HFSS, the ADS (Advanced Design System) software is employed. The simulation outcomes obtained from both HFSS and ADS simulators demonstrate close resemblance.

Millimeter-wave 3D-printed filtering power divider with high frequency selectivity and enhanced heat dispersion

In this paper, a 3D-printed filtering power divider with high frequency selectivity and enhanced heat dispersion is proposed in the Ka-band. Based on filter synthesis theory, a meticulous design is implemented for 32 rectangular resonators and their adjacent inductive irises, enabling the simultaneous realization of a 1-to-8 power divider function and an integrated 11th-order filtering response. To enhance heat dispersion performance for high power applications, cooling fins, and cooling slots are strategically incorporated into the filtering power divider. The selective laser melting (SLM) 3D printing fabrication technology is employed for the cost-effective monolithic fabrication of the prototype. The measured results demonstrate that the return loss of the input port is over 12 dB within the frequency range of 27.0–31.4 GHz. The phase and amplitude difference between outputs are less than ±8° and ±0.6 dB. The transmission coefficient is approximately 9.7 dB, indicating an excellent low-loss performance of the 1-to-8 power divider. Beyond the operating bands, the transmission coefficient experiences a decline of over 55 dB/GHz, demonstrating an 11th-order filtering response. The proposed filtering power divider excels in low loss, superior frequency selectivity, and enhanced heat dispersion, promising advancements in high-power millimeter-wave systems.

Low profile high gain RHCP antenna for L-Band and S-Band using rectangular ring metasurface with backlobe suppression.

In this reported work a single feed, miniaturized, dual layer, and low profile antenna is presented for 1.575GHz frequency band. The proposed antenna offers high gain, lower noise bandwidth, with better sensitivity and range. The ground choke technique is used for back lobe suppression. The prototype is fabricated on FR 4 substrate using manual fabrication technique. This offers an inexpensive and readily available fabrication. Therefore, fabricated antenna is small size, low cost, easily fabricated and tested for satellite communication. The antenna comprises of two layers, containing a patch radiator and a Metasurface layer with 3x3 rectangular ring resonators. The layers are separated using foam with a 12mm width. The proposed prototype is radiating at 1.575GHz and 2.33GHz with an overall dimension of 85.6 x 68.4 x 15.204 mm. The developed antenna provides a gain of 5.9 dBi. The simulated results are verified using VNA and anechoic chamber testing. Moreover, the developed antenna has been successfully tested for L-Band Satellite communication in real time scenario without any LNA. Higher Gain due to Metasurface increase the efficiency of the system. The promising results indicate the aptness of the developed antenna for real-world applications of L-Band and S-Band.