Reconstruction Of Defects Research Articles

Comparing the effects of Bone+B® xenograft and InterOss® xenograft bone material on rabbit calvaria bone defect regeneration.

The bone regeneration therapy is often used in patients with inadequate bone support for implants, particularly following tooth extractions. Xenografts derived from animal tissues are effective bone reconstructive options that resist resorption and pose a low risk of transmitting disease. Therefore, these implants may be a good option for enhancing and stabilizing maxillary sinuses. The purpose of this study was to compare two xenografts, Bone+B® and InterOss®, for the reconstruction of rabbit calvaria defects. The study involved seven male New Zealand white rabbits. In the surgical procedure, 21 spots were created on both sides of the midline calvarium by creating three 8-millimeter defects. A control group was used, as well as two treatment groups utilizing Bone+B® Grafts and InterOss® Grafts. After 3 months, the rabbits were euthanized, followed by pathological evaluation. Analysis of these samples focused on bone formation, xenograft remaining material, and inflammation levels, using Adobe Photoshop CS 8.0 and SPSS version 24. With the application of Bone+B® graft, bone formation ranged from 32% to 45%, with a mean of 37.80% (±5.63), and the remaining material ranged from 28% to 37%, with a mean of 32.60% (±3.65). Using InterOss® grafts, bone formation was 61% to 75%, the mean was 65.83% (±4.75), and the remaining material was 9% to 18%, with a mean of 13.17% (±3.06). The bone formation in the control group ranged from 10% to 25%, with a mean of 17.17% (±6.11). InterOss® had lower inflammation levels than other groups, but the difference was not statistically significant (p > .05). InterOss® bone powder is the best option for maxillofacial surgery and bone reconstruction. This is due to more bone formation, less remaining material, and a lower inflammation level. Compared to the control group, Bone+B® improves healing and bone quality, thus making it an alternative to InterOss®.

Mg alloys with antitumor and anticorrosion properties for orthopedic oncology: A review from mechanisms to application strategies.

As a primary malignant bone cancer, osteosarcoma (OS) poses a great threat to human health and is still a huge challenge for clinicians. At present, surgical resection is the main treatment strategy for OS. However, surgical intervention will result in a large bone defect, and some tumor cells remaining around the excised bone tissue often lead to the recurrence and metastasis of OS. Biomedical Mg-based materials have been widely employed as orthopedic implants in bone defect reconstruction, and, especially, they can eradicate the residual OS cells due to the antitumor activities of their degradation products. Nevertheless, the fast corrosion rate of Mg alloys has greatly limited their application scope in the biomedical field, and the improvement of the corrosion resistance will impair the antitumor effects, which mainly arise from their rapid corrosion. Hence, it is vital to balance the corrosion resistance and the antitumor activities of Mg alloys. The presented review systematically discussed the potential antitumor mechanisms of three corrosion products of Mg alloys. Moreover, several strategies to simultaneously enhance the anticorrosion properties and antitumor effects of Mg alloys were also proposed.

Bone defect reconstruction after radicular cyst enucleation with bovine bone graft and protein rich plasma: A case report

Background: Radicular cyst enucleation and reconstruction with bone graft is a surgical procedure used to remove a cyst that has formed around a tooth root. The procedure involves making an incision in the gum tissue to expose the cyst, removing the cyst and any affected bone, and then filling the resulting defect with a bone graft. The bone graft is typically taken from the patient's own body, such as from the chin or the iliac crest, and is used to promote new bone growth and help stabilize the surrounding teeth. After the procedure, the gum tissue is sutured back into place, and the patient may be prescribed pain medication and antibiotics to help manage any discomfort or infection. The success of the procedure depends on the size and location of the cyst, as well as the patient's overall oral health. Purpose: To aim management of cyst enucleation and reconstruction bone defect with bovine bone graft and protein rich plasma (PRP). Case(s): A female 19 years old with the chief complaint of the patient have caries io the lower left jaw tooth. The patient complains of frequent oedemmon left cheek site. On panoramic radiologic examination, a radiolucent lesion with a radiopaque border was found in the apical region of tooth 36. Case Management: The patient underwent enucleation of cyst and bone defect reconstruction with general anaesthesia. After 14 days, the sutures were removed and the wound were healed. Conclusion: This case of radicular cyst can be used for guideline with enucleation of radicular cyst and bone defect reconstrtion

Retrospective study of the deep circumflex iliac artery flap and the vascularized fibula free flap for maxillary defect repair

ObjectivesThe deep circumflex iliac artery flap (DCIA) and vascularized fibular free flap (FFF) are mainstay flaps for maxillary defect reconstruction. This study compared the functional outcomes and success rates of these flaps to provide midface reconstruction strategies. Materials and MethodsMaxillary defects reconstructed with DCIA or FFF at the Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology between May 2016 and May 2023 were retrospectively analyzed. The length, width, and height of the grafted bone segments; intermaxillary distance; buttress reconstruction rate (BRR); dental arch reconstruction rate (DAR); success rate; and dental implantation rate were compared. ResultsThe DCIA and FFF groups had 33 and 27 patients, respectively. Success rate in the DCIA group was 93.94 % and 100 % in the FFF group. The DCIA length was less than that of FFF; however, the width and height were significantly larger. 87.10 % of cases in the DCIA group were classified as Brown class b and c, 51.85 % of cases in the FFF group were classified as Brown class d. The average BRR in the DCIA group was 69.89 % ± 16.05 %, which was significantly higher than that in the FFF group. A total of 38.7 % and 11.1 % patients in the DCIA and FFF groups, respectively, had completed implantation. ConclusionDCIA has a greater width and height, and is more suitable for repairing Brown class b and c defects, providing sufficient bone for implantation, while the FFF is longer and more suitable for Brown class d defect reconstruction.

Application of metal cushion block combined with Jumbo cup in reconstruction of acetabular bone defect in revision of artificial hip joint

To investigate the application effect and imaging changes of metal cushion block combined with Jumbo cup in the reconstruction of acetabular bone defect after revision of artificial hip joint. Retrospective analysis was made on the clinical data of 83 patients who underwent revision acetabular bone defect reconstruction of the artificial hip joint in our hospital from September 2019 to October 2021. They were divided into group A and group B according to different surgical methods. There were 42 patients in group A, including 26 males and 16 females, aged from 44 to 72 years old with an average of (60.57±4.62) years, who underwent revision with metal cushion block and Jumbo cup. There were 41 patients in group B, including 22 males and 19 females, aged from 42 to 71 years old with an average of (58.74±4.25) years, who underwent revision with metal cushion block and bone cement mortar cup. The operation related indexes, Harris hip function score and visual analogue scale (VAS) of pain before operation, 1 month and 12 month after operation were compared between two groups. The results of X-ray imaging examination (hip rotation center height, acetabular abduction angle, femoral eccentricity and imaging standard qualification rate) before and 12 month after operation were evaluated, and the incidence of complications was compared between two groups. There was no significant difference in operation time, intraoperative bleeding volume and postoperative drainage volume between two groups (P>0.05). Both groups were followed up for 12 to 36 months with an average of (25.36±3.59) months. The scores of pain, function, deformity and Harris' total score in the two groups at 1 month after operation were higher than those before operation (P<0.05), and the scores of pain, function, deformity, joint activity and Harris' total score in two groups at 1 year after operation were higher than those before operation and 1 month after operation (P<0.05), and the above scores in group A were higher than those in group B at 1 year after operation (P<0.05). The VAS of two groups decreased successively at 1 month and 1 year after operation (P<0.05), but there was no significant difference in both groups at each time point (P>0.05). The femoral eccentricity increased in both groups at 1 year after operation (P<0.05), and group A was higher than group B (P<0.05). The height of rotation center and acetabular abduction angle decreased in both groups at 1 year after operation (P<0.05), and the height of rotation center in group A was lower than that in group B (P<0.05), but there was no significant difference in acetabular abduction angle between two groups (P>0.05). The imaging qualification rate of group A was higher than that of group B (P<0.05). There was no significant difference in the incidence of adverse reactions between two groups (P>0.05). Metal cushion block combined with Jumbo cup in the treatment of acetabular bone defects can provide the hip joint function, and restore the hip joint rotation center, femoral eccentricity and acetabular abduction angle, with obvious clinical effect.

Comparison of Novel 3D-printed Stepped Porous Metal Cones and Metaphyseal Sleeves for Reconstruction of Severe Knee Bone Defects: Short-term Clinical Outcomes.

Both porous metal cones and metaphyseal sleeves are excellent implants for reconstructing severe bone defects in the knee joint, but they both exhibit design limitations. The porous metal cone, especially, has significant room for improvement in its shape design. The existing porous metal cones often feature a conical external surface with a relatively small taper, potentially compromising both rotational and axial stability. To improve both axial and rotational stability in porous metal cones, we developed a 3D-printed stepped porous metal cone. This study aimed to assess the short-term clinical outcome of the 3D-printed stepped porous metal cone and to compare it with the clinical outcome of patients who underwent revision total knee arthroplasty (rTKA) with the metaphyseal sleeves during the same period. Patients who underwent total knee arthroplasty revision with metaphyseal bone defect reconstruction from 2019 to 2021 were retrospectively analyzed. A total of 61 patients were enrolled in the study, including 15 patients using 3D-printed stepped porous metal cones and 46 patients using metaphyseal metal sleeves. Thirty patients using metaphyseal sleeves were screened by propensity score matching method and compared with those using stepped cones. Analysis included the American Knee Society Score, the Hospital for Special Surgery knee score, the Western Ontario and McMaster Universities Arthritis index, the Short Form 12 (SF-12) health survey, and radiographic assessment with a mean follow-up of 28.5 ± 8.3 months. To conduct comparative analyses, unpaired Student's t-tests were employed for continuous variables, while categorical variables were analyzed using the appropriate Fisher exact or chi-squared test. In this study, the survival rates of both the stepped cone and metaphyseal sleeve were 100%. There was no statistically significant difference in postoperative knee function scores between the two groups (p > 0.05). However, patients in the cone group had significantly higher mental component summary scores on the SF-12 scale (p < 0.05) and higher increases in mean postoperative physical component summary scores than patients in the sleeve group (p < 0.05). In addition, patients in the cone group experienced fewer intraoperative and postoperative complications compared to the sleeve group. The 3D-printed stepped porous metal cone can effectively reconstruct bone defects in complex rTKA and provide satisfactory early clinical and radiographic results. The 3D-printed stepped cone provides a more stable structure similar to the sleeve while maintaining the original benefits of the cone making it a promising choice for rTKA.

Managing complexity with chimerism: ALT-AMT flaps for complex head and neck reconstruction

BackgroundHead and neck cancer is the most common cancer in males and fifth most common in females in India. Inadequate screening programs and non-availability of local healthcare resources leads to late diagnosis and most cases present at an advanced stage. Surgical extirpation often results in complex, large defects. The concept of chimerism is useful in dealing with such extensive defects.MethodsBetween July 2013 and May 2017, all patients who underwent primary reconstruction of head and neck defects following cancer extirpative surgery, with ALT-AMT chimera flap at a tertiary care cancer centre were included in this study. The patient data of age, sex, etiology, defect size, flap size, perforator configuration, anastomotic details, donor site closure, and complications was retrospectively collected as per the designated proforma from the hospital electronic record, departmental case record forms and the first author’s personal logs, and analyzed.ResultsChimeric flaps based on the lateral circumflex femoral artery i.e. ALT plus AMT provide the desired qualities to address the complex defects. All thirteen patients had a large intraoral mucosal defect. Nine cases had a large extra oral skin defect. The average size of ALT was (112.5 cm2 area) and of AMT was (94.9 cm2 area). The combined area of ALT AMT was 28.5 X 9 = 256.5 cm2. All AMT pedicles were joining the ALT pedicle. 1 AMT was lost and all donor sites needed skin grafting.ConclusionChimeric ALT + AMT is a valuable option when complex, large, multidimensional and multicomponent defects need to be reconstructed. The advantage of utilising a single donor site and two independent flaps with a single microvascular anastomosis.Level of Evidence: Level IV, therapeutic study

LUMiC Endoprosthetic Reconstruction of Periacetabular Tumor Defects: A Multicenter Follow-up Study.

We previously reported promising early results for periacetabular tumor reconstructions using the LUMiC prosthesis. The current study evaluates mid-term complications, revision rates, cumulative incidence of implant revision, and risk factors for complications in a multicenter cohort. We assessed patients in whom a tumor defect after type P1b+2, P2, P2+3, or P1b+2+3 internal hemipelvectomy was reconstructed with a LUMiC prosthesis during the period of 2008 to 2022. Complications were reported according to the Henderson classification. Competing risks models were used to estimate the cumulative incidence of implant revision for mechanical and nonmechanical reasons, and reoperations for any complication. Cox models were used to study the effect of risk factors on dislocation and infection. One hundred and sixty-six patients (median follow-up, 4.2 years [interquartile range, 2.6 to 7.6 years]) were included. A total of 114 (69%) were treated for a primary malignant tumor, 46 (28%) for metastatic carcinoma, 5 (3%) for a benign aggressive lesion, and 1 (1%) for another reason. One hundred and sixty-five reoperations were performed in 82 (49%) of the patients; 104 (63%) of the reoperations were within 6 months. Thirty-two (19%) of 166 implants were revised: 13 (8%) for mechanical reasons, mainly dislocation (n = 5, 3%), and 19 (11%) for nonmechanical reasons, mainly periprosthetic joint infection (PJI) (n = 15, 9%). The cumulative incidences of revision for mechanical reasons and PJI (Henderson 1 to 4) at 2, 5, and 10 years were 11% (95% confidence interval [CI], 7% to 17%), 18% (12% to 25%), and 24% (16% to 33%), respectively. Previous surgery at the same site was associated with an increased dislocation risk (cause-specific hazard ratio [HRCS], 3.0 [95% CI, 1.5 to 6.4]; p < 0.01), and resections involving the P3 region were associated with an increased infection risk (HRCS, 2.5 [95% CI, 1.4 to 4.7]; p < 0.01). Despite a substantial reoperation risk, the LUMiC prosthesis demonstrated its durability in the mid-term, with a low mechanical revision rate and most patients retaining their primary implant. Most complications occur in the first postoperative months. Patients with previous surgery at the same site had an increased dislocation risk and might benefit from more conservative rehabilitation and aftercare. Measures should be aimed at reducing the PJI risk, especially in resections involving the P3 region. Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

CURRENT POSSIBILITIES AND PROSPECTS OF ALVEOLAR BONE DEFECT REPLACEMENT AND COVERING TISSUES: NARRATIVE LITERATURE REVIEW

BACKGROUND: The percentage of the need to increase the volume of supporting tissues remains high - from 43% to 77%, despite the fact that the currently used approaches for augmentation of tissue structures do not always show the expected results. A common cause of problems with the growth of new supporting tissues is the reduced activity of inducing factors of local and systemic levels in the human body. A critical deficiency of the integumentary structures significantly affects the result of reconstructive and reconstructive surgical interventions.Objective: to characterize the modern achievements of intraoral reconstruction of volumetric defects of supporting tissues, including bioengineering for the regeneration of the alveolar jaw bone and integumentary structures.Methods. The search strategy included an electronic search of literature sources performed in the PubMed database using keywords. The formats "Review", "Systematic Review" and "Clinical Trial" were requested. The search depth was 20 years.Results. Of the 378 articles found, 44 met the inclusion criteria set for this review. The prerequisites for the reconstruction of the alveolar ridge with an emphasis on early vascularization of de novo tissues are outlined, the advantages and disadvantages of bone and soft tissue grafts are characterized. The results of research efforts using mesenchymal stem cells, which play a crucial role in the regeneration of the alveolar bone and gum, are presented. The evolution of tissue engineering structures for integumentary tissues is presented – from thin layers of epithelial cells to 3D – epithelized equivalents of the oral mucosa.Conclusion. The rapidly increasing number of biomaterial studies involving stem cells, the active development of tissue engineering indicates the prospects for the development of biomaterials of the next generations, which will be able to work effectively together with their own mechanisms of tissue regeneration in their unique architecture.

Custom Triflange Acetabular Implants for Complex Hip Revisions: A Case Series.

Revision total hip arthroplasty (THA) presents a formidable challenge when addressing extensive acetabular defects, particularly in severe cases classified under Paprosky types 3A and 3B and American Academy of Orthopaedic Surgeons types 3 and 4. Traditional methods often fall short, prompting the potential use of custom triflange acetabular components or patient-specific acetabular implants (PSAIs). These implants are specifically designed to conform to an individual's anatomy, aiming to enhance defect reconstruction and pelvic stabilization. This case series describes the utilization of advanced 3-dimensional printing and rapid prototyping technologies to construct customized acetabular components, which can be instrumental in enabling precise preoperative planning and surgical execution for these difficult acetabular cases and potentially leading to improved surgical outcomes.

Comparative Study of Collagen Density, Fibroblast, and Neovascularization in Tracheal Defect Reconstruction with Primary Repair and External Oblique Muscle Aponeurosis Patch (A Novel Study with New Zealand Rabbit)

Background: The lack of ideal materials and the high incidence of complications make tracheal defect reconstruction challenging. The use of aponeurosis as a surgical patch and flap in reconstruction is not uncommon, but no studies had been conducted to analyse its use in tracheal defect reconstruction, though its effectivity in wound healing was significant in reconstruction of other organs. Objective: This study aims to compare collagen density, fibroblast expression, and neovascularization in tracheal defect reconstruction using primary suture and using external oblique muscle aponeurosis patch. Methods: This randomized control trial is a laboratory experimental study using male New Zealand white rabbits. Randomization was carried out with permuted block randomization into a control group (primary suture) and a treatment group (reconstruction with external oblique muscle aponeurosis patch). Mascroscopic and histopathological assessments were carried out 14 days after surgery. Results: We got homogeneous samples in both groups (9 samples each) in terms of age (p = 0.763), weight before procedure (p = 0.347), and weight after procedure (p = 0.536). Macroscopically, no wound dehiscence, pus, or inflammation at the surgical site in either the control or treatment groups. Histopathological analysis showed that there were no differences in collagen density (p = 1.00), fibroblast expression (p = 0.414), and neovascularization (p = 0.558) between the two groups. Conclusion: It can be concluded that there are no differences in collagen density, fibroblast expression, and neovascularization in New Zealand rabbits with tracheal defect using primary suture and using external oblique muscle aponeurosis patch

Outcomes of internal mammary artery perforator flap in head and neck reconstruction: A systematic review.

This study aims to evaluate the functional and prognostic outcomes associated with the internal mammary artery perforator (IMAP) flap in various head and neck defect repairs, given the current lack of clarity on its effectiveness. We performed a systematic review of various databases: PubMed, Embase, Scopus, Web of Science, and ScienceDirect using keywords such as "Internal mammary artery perforator flap" and "IMAP." Screening and data extractions were performed by two individual reviewers. Articles were considered eligible if they included sufficient information on IMAP flap features, their applications in the head and neck, and outcomes. From 264 articles analyzed, 24 studies were included for qualitative analysis. Out of which, 125 patients who received internal mammary artery perforator flaps were included. Most of the patients, 103 (88%), received pedicled IMAP flaps, and 22 (12%) received IMAP free flaps. The second internal mammary artery (IMA) was favored as the single perforator (81.5%), with the combination of the first and second IMA being the primary choice for dual perforators (92.5%). IMAP flaps were predominantly single perforator flaps (65%), with 35% being dual perforator flaps. Among various applications, IMAP flaps are commonly employed in the reconstruction of neck defects (25.5%), pharyngocutaneous fistula repair (20.8%), and burn scar contracture restoration (8%). Only seven (5.6%) patients had flap complications, including venous congestion (1.6%), partial necrosis (1.6%), complete necrosis (1.6%), and incision dehiscence (0.8%). Donor sites were predominantly closed by the primary closure (92%). 3.2% of donor sites had minor complications. The average follow-up was 12.6 (IQR: 6-18) months. This systematic review highlights the effectiveness and safety of IMAP flaps in head and neck reconstruction, with positive outcomes and minimal complications.

Postoperative Complications of Flap Procedures in Chest Wall Defect Reconstruction: A Two-Center Experience

Background and Objectives: Chest wall defect reconstruction is a complex procedure aimed at restoring thoracic structural integrity after trauma, tumor removal, or congenital issues. In this study, postoperative complications were investigated to improve the care of patients with these critical conditions. Materials and Methods: A retrospective study of chest wall reconstructions from 2004 to 2023 was conducted at Klinikum Nürnberg and Evangelisches Waldkrankenhaus Spandau—Berlin. Data included patient demographics, comorbidities, defect etiology, surgery details, and complications using the Clavien–Dindo classification. Results: Among the 30 patients included in the study, a total of 35 complications occurred in 35 thoracic wall defect reconstructions. These complications were classified into 22 major and 13 minor cases. Major complications were more common in patients with cancer-related defects, and considerable variations were observed between free flap and pedicled flap surgeries. Notably, the use of the anterolateral thigh (ALT) flap with vastus lateralis muscle demonstrated promise, exhibiting fewer complications in select cases. The reconstruction of chest wall defects is associated with substantial complications regardless of the etiology of the defect and the particular surgical procedure used. Interestingly, there was a lower complication rate with free flap surgery than with pedicled flaps. Conclusions: The ALT flap with vastus lateralis muscle deserves further research in this field of reconstruction. Multidisciplinary approaches and informed patient discussions are crucial in this complex surgical field, emphasizing the need for ongoing research and technique refinement.

Reconstruction of a Wrist Defect with a Distally-Based Radial Artery Perforator Flap: A Case Report

Introduction: Because of the important anatomical structures situated superficially, reconstruction of wrist soft tissue defects is challenging for the plastic surgeon. Depending on the characteristics of the defect, various reconstruction methods are commonly performed. A pedicled perforator flap stands as a valuable option providing reliable coverage of the defect while preserving the vascularity. Case report: A 35-year-old male presented with a post traumatic wrist soft tissue defect with exposure of underlying structures. Surgical debridement was performed, and the resulting defect was reconstructed with a distally-based radial artery pedicled perforator flap. Postoperative recovery was uncomplicated. Conclusion: Radial artery perforator flap proved to be a workhorse flap for soft tissue reconstruction of the wrist. It has many of the benefits of the radial forearm flap but minimizes the disadvantages.

Reconstruction of Scalp and Skull Defects by a Free Anterolateral Thigh Flap Combined With Fascia Lata and Vastus Lateralis Muscle.

Reconstruction of composite scalp and skull defects is a great challenge for plastic surgeons, and this study aimed to report the therapeutic regimen of using free ALT flaps with fascia lata and vastus lateralis muscle to cover scalp and cranial defects. A retrospective analysis was performed including 10 patients with composite scalp and skull defects who were treated with a free ALT flap with fascia lata and vastus lateralis muscle from January 2012 to June 2020. All patients underwent a 1-stage operation and were followed up for 1 year with clinical data including sex, age, etiology, skull defect area, scalp defect area, flap area, dura mater involvement, recipient vessel, donor site repair, lumbar cistern drainage, and complications. All flaps survived well, 2 patients developed complications, one had cerebrospinal fluid leakage, and another experienced partial skin graft necrosis; All patients were satisfied with both the appearance and functional outcomes of the procedure. Free tissue transplantation is an effective method for large defects of the scalp and skull. The combination of a free ALT flap with fascia lata and vastus lateralis muscle, which has a long pedicle, convenient flap designs, less donor-site morbidity, and effective prevention of cerebrospinal fluid leakage, is an ideal choice to repair the composite scalp and cranial defects in stage 1.

Versatility of Islanded Nasolabial Flap Based on Facial Artery and Vein for Reconstruction of Oral Cancer Defects, Experience in a Tertiary Care Center

Versatility of Islanded Nasolabial Flap Based on Facial Artery and Vein for Reconstruction of Oral Cancer Defects, Experience in a Tertiary Care Center

3D-Printed custom-made hemipelvic endoprosthetic reconstruction following periacetabular tumor resection: utilizing a novel classification system

BackgroundCustomized 3D-printed pelvic implants with a porous structure have revolutionized periacetabular pelvic defect reconstruction after tumor resection, offering improved osteointegration, long-term stability, and anatomical fit. However, the lack of an established classification system hampers implementation and progress.MethodsWe formulated a novel classification system based on pelvic defect morphology and 3D-printed hemipelvis endoprostheses. It integrates surgical approach, osteotomy guide plate and prosthesis design, postoperative rehabilitation plans, and perioperative processes.ResultsRetrospectively analyzing 60 patients (31 males, 29 females), we classified them into Type A (15 patients: Aa = 6, Ab = 9), Type B (27 patients: Ba = 15, Bb = 12), Type C (17 patients). All underwent customized osteotomy guide plate-assisted tumor resection and 3D-printed hemipelvic endoprosthesis reconstruction. Follow-up duration was median 36.5 ± 15.0 months (range, 6 to 74 months). The mean operating time was 430.0 ± 106.7 min, intraoperative blood loss 2018.3 ± 1305.6 ml, transfusion volume 2510.0 ± 1778.1 ml. Complications occurred in 13 patients (21.7%), including poor wound healing (10.0%), deep prosthesis infection (6.7%), hip dislocation (3.3%), screw fracture (1.7%), and interface loosening (1.7%). VAS score improved from 5.5 ± 1.4 to 1.7 ± 1.3, MSTS-93 score from 14.8 ± 2.5 to 23.0 ± 5.6. Implant osseointegration success rate was 98.5% (128/130), with one Type Ba patient experiencing distal prosthesis loosening.ConclusionThe West China classification may supplement the Enneking and Dunham classification, enhancing interdisciplinary communication and surgical outcomes. However, further validation and wider adoption are required to confirm clinical effectiveness.

Reconstruction options for infection-related defects : Plastic surgery armamentarium

The occurrence of infections has always been feared in all surgical disciplines. Plastic reconstructive surgery faces the challenge of treating infection-related defects on apatient-specific basis, which requires amultidisciplinary treatment concept. Satisfactory treatment success can only be achieved through radical debridement for infection cleansing, optimization of the perfusion situation paired with targeted anti-infective treatment and, if necessary, with soft tissue reconstruction by plastic surgery. This article presents the current possibilities of plastic and reconstructive surgery with respect to the reconstruction of infection-related defects. Proven and reliable strategies are presented and supplemented by promising experimental approaches. Due to the often multilayered defect situation caused by infections, from the epidermis to cancellous bone, the entire armamentarium of plastic and reconstructive surgery is used for reconstruction. The early involvement of plastic surgery in the treatment of infections and the interdisciplinary and multimodal treatment approach have proven their worth in the treatment of complex infection situations.

Diabetes Insipidus After Endoscopic Endonasal Pituitary Macroadenoma Resection, Correlation of Patient and Surgery-Related Risk Factors

Purpose: To identify patient and surgery related factors that could predict the development of postoperative central diabetes insipidus (CDI). Methods: This is a retrospective case-control study conducted at a single-institution tertiary referral center. Patients undergoing endoscopic endonasal skull base surgery for pituitary adenoma between November 2018 and April 2023 were recruited. The main outcome measures collected include age, gender, comorbidities, tumor type, postoperative diabetes insipidus, intraoperative and postoperative cerebrospinal fluid (CSF) leak, flow of CSF leak, number of layers required for repair, the use of nasal packing, and hospital length of stay. Results: A total of 20 patients developed DI postoperatively. Patients demographic and comorbidity profile did not correlate with DI development. The encounter of an intraoperative CSF leak was correlated with post-op DI (X2(1) =18.35, p&lt;0.001) with a RR of 2.7 (CI=1.37-5.28). The use of nasal packs was also correlated with post-op DI (X2(1) =10.17, p=0.001) with a RR of 1.8 (CI=1.15-2.87). Defects requiring a two or more layers for reconstruction also correlated with post-op DI compared to single layer repairs (X2(1) =12.15, p&lt;0.001) irrelevant of the materials used. Development of DI post-op correlated with an increased hospital length of stay (t(64) = -3.35, p =0.001). Conclusion: The physician should be careful when evaluating patients with pituitary adenomas in the postoperative period, particularly those with intraoperative CSF leak, nasal packing, and those who underwent multilayer reconstruction of the surgical defect.

Effect of Preoperative Neck Radiotherapy on the Reconstruction of Head and Neck Defects With the Supraclavicular Artery Island Flap.

Purpose: The supraclavicular artery island (SAI) flap is commonly used in the reconstruction of head and neck defects. However, the safety of SAI flaps for neck irradiated patient needs to be verified. To investigate the safety of using the SAI flap for patients who have undergone neck radiotherapy, as well as the risk factors for flap complications. Materials and Methods: Sixty-one patients (16 irradiated and 45 nonirradiated) with SAI flap-reconstructed head and neck defects were included, and relevant data were collected retrospectively. The gender, age, body mass index, presence of diabetes mellitus, preoperative albumin level, and flap size between irradiated and nonirradiated patients had no significant difference. Results: No significant difference was observed in the incidence of complications (total, mild, or severe) between the radiotherapy and nonradiotherapy groups. In univariate analysis, preoperative radiotherapy was not associated with postoperative complications of the SAI flap procedure (P = 1.00), while a low preoperative albumin level was a significant risk factor for postoperative complications (P < .05). Conclusions: Our data suggest that preoperative radiotherapy does not increase the risk of SAI flap postoperative complications compared with surgical reconstruction alone.