Recent Stress Field Research Articles

SpannEnD – a 3D geomechanical model of Germany for the prediction of the recent crustal stress state

Abstract. The recent crustal stress state is a crucial parameter in the search for a high-level nuclear waste repository. It is relevant not only for site selection and short-term stability during operation but also for predicting long-term safety. However, the level of knowledge in this regard is still limited in Germany. It is based on stress orientations and stress regime information from the World Stress Map (WSM) project and pointwise stress magnitude records. We present the results of a 3D geomechanical numerical model that improves the state of knowledge by providing a continuum-mechanics-based prediction of the recent crustal stress field in Germany. The model extends over an area of 1000×1250 km2, covering Germany and nearby regions. It contains 22 geological units, each parameterized with individual properties (density, Young's modulus and Poisson's ratio). We assume linear elasticity, and the finite element method is used to solve the equilibrium of forces. The model is calibrated with horizontal stress magnitude records and validated with additional data, for example, vertical stress magnitudes or data of the WSM project. Our model results are in a good agreement with a mean orientation of the maximum horizontal stress (SHmax) derived from the WSM, as indicated by a mean of the absolute differences of 12∘. Furthermore, the model results lie entirely within the standard deviation of the derived orientation of SHmax. Mean values of the absolute stress differences between calibration data and model results of 4.6 MPa for the minimum horizontal stresses (SHmin) and 6.4 MPa for the SHmax also show a good agreement. The model results can be used, for example, for the calculation of fracture potential, for slip tendency analyses or as boundary conditions for smaller local models. For smaller model volumes, where little or no stress information is available, it provides synthetic stress magnitude data that can be used for calibration. As such, the model provides a valuable starting point for the detailed assessment of stability at yet-to-be-determined siting regions for a high-level nuclear waste repository.

Hydrothermal Reservoir and Electrical Anisotropy Investigated by Magnetotelluric Data, Case Study of Asal Rift, Republic of Djibouti

At the center of the Republic of Djibouti, an eroded rift called Asal is located where tectonic and magmatic activities can be observed at the surface. Multiple studies were carried out with different exploration methods, such as structural, geophysical and hydrogeological, to understand rifting processes and characterize the subsurface of this rift. Among these subsurface exploration methods, the deep geoelectrical structures need to be better defined with the magnetotelluric (MT) method to better delineate the deep resistivity structures. With the objective of improving our understanding of the deep rift structure, magnetotelluric (MT) data acquired in the Asal rift were analyzed and inverted to build a 2D electrical conductivity model of the hydrothermal system. To achieve this, a dimensionality analysis of the MT data along a 2D profile perpendicular to the rift axis was carried out. Results of this analysis justify the approximation of 2D conductivity structure. Then, 2D inversion models were achieved to build models of the conductive structures. Dimensionality analysis results revealed the existence of electrical anisotropy. Consistent correlation between geoelectric strike and electrical anisotropy direction was suggested. Electrical anisotropy direction determined from the ellipticity of the phase tensor for the short periods was interpreted as the consequence of tectonic activity and horizontal deformation of the rift. Moreover, electrical anisotropy direction for the long periods was assumed to be related to the effects of combined magmatic-tectonic activities with predominant magma/dyke intrusion, which implies the vertical deformation and the subsidence of the rift and may imply the alignment of Olivine. Moreover, the variation and rotation of paleo and recent stress fields direction of plate motion in Asal rift located at the junction of three diverging plates—Arabia, Nubia and Somalia—over geological time can generate both magmatic and tectonic activities which in turn can induce a preferred direction of electrical anisotropy which is the direction of the highest conductivity. While the north-south electrical anisotropy direction is parallel to the direction of Red Sea Rift propagation, the north-east electrical anisotropy direction is aligned with the extension direction between Arabia and Somalia plates. Results of the 2D inversion models presented for the Asal rift allowed to identify two superimposed conductive units close to the surface and are interpreted as a shallow aquifer and a wide potential hydrothermal system. These conductive mediums are overlying a relatively resistive medium. The latter is associated with a magmatic system likely containing hot and/or partly molten rocks. The 2D conductivity model developed in this study could be considered as conceptual model of Asal rift prior to modeling multiphase fluid flow and heat transfer and/or could be used to identify the hydrothermal system for future drilling target depth of geothermal exploration.

Recent activity and paleoseismicity of an intraplate extensional fault: the Calamocha fault (Jiloca graben, central Iberian Chain)

The Calamocha fault is an 18-km-long, NNW–SSE striking pure normal fault that moves down the northern sector of the Jiloca graben with respect to the Neogene infill of the Calatayud basin (central Iberian Chain). Its structure and kinematics are characterized by means of detailed geological mapping, morphotectonic analysis and data recording at the outcrop scale. The Calamocha fault represents the inversion of a previous contractional fault zone under the recent tensional stress field (WSW–ENE trending σ3 trajectories). The extensional activity started during the Late Pliocene (ca. 3.8 Ma), accumulating a maximum net slip of 190–230 m (long-term slip rate of 0.05–0.06 mm/a). The palaeoseismological study of three artificial exposures near Calamocha town evidenced recurrent slip during the Late Pleistocene, which proves its active character. Analysis of faulted clastic alluvial units, dated by means of optically stimulated luminescence (OSL), reveals at least eight slip events since 145.9 ± 9.1 ka, the last one being younger than 13.8 ± 0.9 ka. Only a few events represent visible accumulated displacement on the main synthetic rupture surfaces; this allows a rough estimate of the short-term slip rate (during the Late Pleistocene) of about 0.1 mm/a, faster than the long-term rate. The Calamocha fault could potentially produce a characteristic earthquake (in the sense of Schwartz and Coppersmith, J Geophys Res 89:5681–5698, 1984) with moment magnitude Mw ≈ 6.7 ± 0.3 (Mw ≈ 6.9 ± 0.3 in a scenario of activation of the whole Calamocha–Daroca fault zone), average coseismic displacement of 0.5–1.3 m and average recurrence period under 15 ka.

The recent stress state of Germany – results of a geomechanical–numerical 3D model

Abstract. A decisive criterion for the selection and the long-term safety of a deep geological repository for high radioactive waste is the crustal stress state and its future changes. The basis of any prognosis is the recent crustal stress state, but the state of knowledge in Germany is quite low in this respect. There are stress orientation data provided by the World Stress Map (WSM, Heidbach et al., 2018) and stress magnitude data from a database (Morawietz et al., 2020) for Germany, both providing selective information on the recent stress field. However, these data are often incomplete, of low quality and spatially unevenly distributed. Therefore, a 3D continuous description is not possible with these data so far, at most for the orientation of the maximum horizontal stress (SHmax), but not for the most important magnitudes of the minimum (Shmin) and SHmax. In the course of the SpannEnD project, a geomechanical–numerical 3D model of Germany is created, with which a continuous description of the complete tensor of the recent stress field in Germany is possible. The model covers an area of 1250×1000 km2 from Poland in the east, to France in the west, from Italy in the south to Scandinavia in the north. The depth extent is 100 km. Even though the focus is primarily on Germany, the model area was chosen to be so wide to minimize boundary effects and for a simplified definition of the displacement boundary conditions, which are ideally oriented perpendicular or parallel to the orientation of SHmax. The model contains a total of 21 units: The upper part of the lithospheric mantle, the lower crust, four laterally overlapping units of the upper crust, and 14 stratigraphic units of the sedimentary cover. The stratigraphic subdivision of the sedimentary cover is only done in the core area of the model; because this area is the focus of our study, our calibration data are mainly from this region and well-resolved geometry data are available. Outside of the core area, the sediments are grouped into an undifferentiated unit. The units are parameterized with density and elastic material parameters (Poisson's ratio and Young's modulus). The model has a lateral resolution of 2.5×2.5 km2 and a vertical resolution of a maximum of 240 m; in total it includes 11.1 million hexahedral elements. The equilibrium of forces between body and surface forces is solved by finite element method. The model is calibrated with Shmin and SHmax magnitudes from the WSM and data from the stress magnitude database. First, an initial stress state is generated and in a second step displacement boundary conditions are defined at the model edges, which are adjusted until a best-fit to the calibration data is found. The results show good agreement with both the SHmax orientation data from the WSM and the magnitudes of the two principal horizontal stresses (Shmin and SHmax) from the magnitude database.

Slip tendency analysis of major faults in Germany

Abstract. Natural seismicity and tectonic activity are important processes for the site-selection and for the long-term safety assessment of a nuclear waste repository, as they can influence the integrity of underground structures significantly. Therefore, it is crucial to gain insight into the reactivation potential of faults. The two key factors that control the reactivation potential are (a) the geometry and properties of the fault such as strike direction and friction angle, and (b) the orientations and magnitudes of the recent stress field and future changes to it due to exogenous processes such as glacial loading as well as anthropogenic activities in the subsurface. One measure of the reactivation potential of faults is the ratio of resolved shear stress to normal stresses at the fault surface, which is called slip tendency. However, the available information on fault properties and the stress field in Germany is sparse. Geomechanical numerical modelling can provide a prediction of the required 3D stress tensor in places without stress data. Here, we present slip tendency calculations on major faults based on a 3D geomechanical numerical model of Germany and adjacent regions of the SpannEnD project (Ahlers et al., 2021). Criteria for the selection of faults relevant to the scope of the SpannEnD project were identified and 55 faults within the model area were selected. For the selected faults, simplified geometries were created. For a subset of the selected faults, vertical profiles and seismic sections could be used to generate semi-realistic 3D fault geometries. Slip tendency calculations using the stress tensor from the SpannEnD model were performed for both 3D fault sets. The slip tendencies were calculated without factoring in pore pressure and cohesion, and were normalized to a coefficient of friction of 0.6. The resulting values range mainly between 0 and 1, with 6 % of values larger than 0.4. In general, the observed slip tendency is slightly higher for faults striking in the NW and NNE directions than for faults of other strikes. Normal faults show higher slip tendencies than reverse and strike slip faults for the majority of faults. Seismic events are generally in good agreement with the regions of elevated slip tendencies; however, not all seismicity can be explained through the slip tendency analysis.

Eurekan faults on northern Ellesmere Island, Arctic Canada: from Cenozoic strike-slip tectonics to recent seismicity

The Eurekan deformation is a partially contractional Cenozoic tectonic event that affected large parts of the Arctic region. In the study area on northern Ellesmere Island, major NE-SW trending strike-slip faults occur, which are related to the Eurekan deformation. The outcrop data show that left-lateral strike-slip kinematics slightly dominate, but also right-lateral kinematics were documented. Cross-cutting relationships of the individual faults give evidence for multiple fault reactivations within major strike-slip zones. The reconstructed paleostress fields show two phases. The first phase started with a N-S compression and shifted over a NNE-SSW compression into a NNW-SSE compression. The second phase was a WNW-ESE compression. The paleostress field evolution reflects the movements of Greenland. During the Eurekan phase 1, Greenland moved northward and during Eurekan phase 2 it moved to the WNW. These motions likely controlled the stress field on northern Ellesmere Island. From the paleostress field analyses and the orientation of the strike-slip faults in the study area, it can be derived that the Eurekan phase 1 deformation is characterized by left-lateral strike-slip faults, whereas most-likely during Eurekan phase 2 the majority of right-lateral strike-slip faults formed. The paleostress field analysis implies that many Eurekan faults are reactivated Ellesmerian faults. Recent seismic events indicate ongoing tectonic activity at some of the major strike-slip faults. This sheds new light on the geodynamics of northern Ellesmere Island, which was mechanically coupled to the Greenland plate, and implies that under the recent stress field, earthquakes at strike-slip faults are still possible and some of these faults were active in at least three phases over the last 350 Myr.

Statistical analysis of the structural trends in the Galician Margin and their relationship with the Cenozoic evolution of the northwestern sector of the Iberian Margin

Statistical methods of crust surface analysis based on Digital Terrain Models (DTM) and applied to structural elements have become a useful tool in tectonic studies. This paper presents a DTM morphostructural analysis of the Galicia Margin and the Iberian and Biscay abyssal plains, which has identified about 5,800 lineaments. The highest number of lineaments are located in the Charcot and Coruña Highs, in the western sector of the Galicia Bank, in the marginal platforms zone and in the Galicia northern margin. The lineaments analysis shows that they have two dominant directions, E-W and NE-SW. In addition, two other relative maxima of NW-SE and N-S directions have been determined. The cumulative total length of the identified lineaments exceeds 45,000 km. The statistical parameters have a length mode of around 5,000 m, a length average of about 7,800 m and a log-normal distribution of the length frequency. The orientations determined from the analysis of the lineaments are a reflection of the crustal scale fault systems established from gravimetric and magnetic anomalies and multi-channel seismic profiles. These faults developed in the Galicia Margin during the Variscan and Alpine orogenies and were reactivated under the recent stress field.

Contemporary stress and strain field in the Mediterranean from stress inversion of focal mechanisms and GPS data

Mapping the contemporary stress field of the Mediterranean provides fundamental insights on the complexity of plate tectonic forces throughout the region and at different depths. Despite increased data availability and methodological improvements, most recent comprehensive stress field characterization across the entire Mediterranean dates back to 1995. To extend the regional stress information, we use all earthquake focal mechanisms compiled in the World Stress Map database release 2016 for a formal stress inversion. Our main goals are to (1) improve the resolution of the stress field orientation, (2) evaluate the performance of the recently refined stress inversion methodology in a tectonically complex region, (3) test the hypothesis of a depth-dependent stress orientation heterogeneity, and (4) compare different types of stress and strain observations from surface using the GPS-derived information on the strain rate tensor down to the seismogenic crust using summation of normalized seismic potencies. The obtained stress orientations generally capture the main seismotectonic features, including tectonically complex settings such as the Alpine Orogeny or the Ionian Sea. The orientation of the maximum horizontal stress SHmax tends to be uniform with depth within uncertainties while larger stress heterogeneity (quantified by means of the focal mechanism diversity and misfit angles) is found between 5 and 14 km. Both, the orientation of the largest horizontal shortening axis of the strain field from potency tensors, and horizontal strain rate tensor from GPS data are generally sub-parallel to SHmax orientation, indicating a linear stress/strain relationship and that the orientations of the co-seismic release and interseismic strain accumulation are generally consistent.

The Influence of the Basement on the Formation of the Recent Structure of the East European Platform

Structural–geomorphological studies of most of the territory of the East European Platform revealed an arch-block style of the recent dislocations. The 3D geodynamic modeling showed a direct correlation (K = 0.26) between the basement structures and the surface topography, indicating a direct geodynamic influence of the basement on the structure of the platform cover. The recent stress field calculated for the territory of the Central Russian Upland, Klin–Dmitrov Range, Meshchera Depression, and Oka–Don Trough allowed the identification of the areas that are close to mechanical destruction and are seismically dangerous.

Seismotectonic Activation of Modern Structures of the Siberian Craton

Our research of the modern structures of Siberian Craton aims to reveal regional regularities in the seismotectonic destruction of the Earth’s crust and to clarify the dynamics of the formation of the focal zones of strong earthquakes. Analysis of activated structures and marginal suture zones located in the study area was based on structural and geophysical data, the modern structural plan, and the quantitative characteristics of modern and recent tectonic movements, active faults, and tectonic stress fields identified by tectonophysical analysis of deformation and seismological parameters. Unambiguous correlation between the seismic activity level of modern structures and the rates of modern and recent tectonic movements were not determined in our study. The most active structures of the Siberian Craton located in zones of the dynamic influence of marginal sutures are contrasted against the gradient field of modern vertical tectonic movements and characterized by the mosaic field of the mean and low rates of modern movements. The kinematics of seismotectonic deformation and levels of seismic activation of suture zones of the Siberian Craton are governed by global geodynamic processes taking place at the boundaries between the Eurasian, North American and Amur lithospheric plates. The activated structures in the northern regions of Siberian platform, which are characterized by the highest rates of modern movements, are heterogeneous. Both fluid processes and glacioisostatic movements may have influenced the dynamics of the formation of these high-gradient deformation zones. In seismotectonic studies aimed at determining levels of the potential seismic hazard of modern structures, we find it important to take into account errors in geodetic data and ensure more correct reference to the rates of tectonic movements at the neotectonic stage. In order to correctly assess the degree of geodynamic activity of modern structures, special consideration should be given to the fluid-geodynamic factor that controls most geodynamic processes, including tectonic stress accumulation, the formation of earthquake focal zones, and the intensity of seismic events.

Recent and paleo-stresses at the northern margin of the Black Sea and the Crimea Mountain in Meso-Cenozoic—Quarter (according to mechanisms of earthquakes foci and field tectonophysical data)

Recent stress fields at the northern margin of the Black Sea have been characterized on the base of 32 mechanisms of the earthquakes foci. Orientations of compression axes in the foci give evidence that present-day tectonic process takes place under conditions of compression and transpression. For 13 mechanisms located within the band between the southern cost of the Crimea and the base of the continental slope regional stress field has been estimated, which reflects deformational regime of horizontal stress in northwest—southeast direction. The results of specification of paleostresses fields and deformation regimes have been presented according to field tectonophysical observations in 105 sites. Interpretation has been fulfilled within the limits of two generalized stages: extension in the Early Cretaceous and compression in the Cenozoic—Quarter. Stress fields of inverse, nappe and strike-slip types have been attributed to the stage of Cenozoic compression. Generalized paths of compression have been plotted, which form fan-like pattern within the arc-like sector of the South Coast of the Crimea from cape Meganom to cape Ayu-Dag and change their direction from north—east to west—east. Averaged stress fields have been calculated, which are of inverse type in Sudak-Feodosian zone and are represented by strike-slip types for the central and western parts of the Mountain Crimea (MC). The southwestern part of the MC is characterized by strike-slip-type stress field with northwest—northeast direction of the compression axis. The stage of Cretaceous extension is characterized by stress fields of normal type. The southwestern part of MC is characterized by north-north-east—north-north-west trend of extension and for the central part of MC the north-east—south-west direction of extension has been obtained.

New insight of the geological structures and tectonic framework of Ahnet and northwestern part of Tin Zaouatine terranes (western Hoggar, Algeria) constraints from aeromagnetic, gamma ray, and remote sensing data

The Ahnet and Tin Zaouatine terranes are located in the southern sector of the Algerian Desert and are part of the Tuareg Shield, which was built up during east-west shortening (Pan-African orogeny). This paper presents a new 1/200,000 geological and tectonic map of the Tin Tanet Firt sheet map (mainly of the Ahnet terrane and the northwestern part of the Tin Zaouatine terrane). Enhancement and processing of multispectral satellite data (Landsat 7 ETM+) combined with field campaign and airborne geophysics was used to discriminate geological lithologies and tectonic structures. We define six geological domains: (i) Palaeozoic formation and Cambrian continental facies and plutonic rocks, (ii) Late- to post-orogenic plutonic rocks, (iii) synchronous orogenic plutonic rocks, (iv) Neoproterozoic formation, (v) Mesoproterozoic volcanics, metasedimentary rocks, and associated plutonic rocks, and (vi) Late Paleoproterozoic metasedimentary rocks. Airborne magnetic data and textural features derived from remote sensing and fieldwork allow us to identify faults and shear zones that affect the whole studied terrane. Interpreted tectonic lines and foliation paths leads us to suggest a deformation model which involves two deformation pahses: an older N-S to NNE-SSW shortening D1 and a younger D2 defined by the N-S trend and a compressional character revealed in the Ahnet terrane and Camp Zohra Complex domain which is considered a continuum deformation split into three phases that affect and form structures of the whole Ahnet and the northwestern part of Tin Zaouatine terranes at the Pan-African orogeny. The most recent stress field recorded in this region is expressed as NE-SW strike-slip faults.

Neotectonics and tectonic stresses of the Sakhalin Island

The paper describes the neotectonics of the Sakhalin Island and analyzes the latest and recent tectonic stresses in the study area in order to establish their differences in the Amur and Okhotsk microplates, which boundary is confined to the Tym-Poronaisk fault, the largest NS-striking fault in the Central Sakhalin (Fig. 1). Our map of the structural geomorphological features of the study area (Fig. 2) shows three longitudinal zones: the western and eastern uplifts, and the Central Sakhalin basin between the uplifts. In the Southern Sakhalin, neotectonic stresses were studied by a combination of tectonophysical methods and the method of structural geology (Figures 3 to 6, and Table). Our study shows that the regional axes of maximum and minimum compressive principal normal stresses are primarily of the subhorizontal orientations (Fig. 5, Д ) . In the Northern and Central Sakhalin, neotectonic stresses were reconstructed by the structural geomorphology method. The compression axes are oriented sublatitudinally, with the NE-trending strike in the Northern Sakhalin (Fig. 7, A ), and the extension axes are oriented submeridionally; in the Northern Sakhalin, respectively, they are oriented in the NW direction. The results of our study of neotectonic stresses were used to construct a map of recent geodynamics of Sakhalin (Fig. 7, Б ), which shows zones differing in the geodynamic settings of the most recent faulting. According to the analysis of the recent tectonic stress with respect to the earthquake focal mechanisms in the period from 1978 to 2015 (Fig. 8), recent stresses dominating in Sakhalin have mainly the sublatitudinal low-angle orientations of the deviatoric compression axis. The submeridional low-angle orientations of the deviatoric extension axes are observed in the Northern Sakhalin and partly in the north of the Southern Sakhalin (see Fig. 8). The high-angle axes of deviatoric extension are typical of the western and central parts of the Southern Sakhalin, and such extension leads to horizontal compression and reverse faulting. In some areas of the recent stress field, the deviatoric axes of compression and extension have unstable orientations. The latitudinal boundaries of such areas are nearly coincident with the boundaries of the zones that differ in the geodynamic settings of the most recent faulting, which means that these areas and zones are reliably identified. The relative inhomogeneity of the neotectonic and recent stress fields in the Southern Sakhalin does not give grounds to distinguish differences in the state of crustal stresses in the areas located on the sides of the Southern Sakhalin fault. As a consequence, a boundary between the Amur and the Okhotsk Plate in the South Sakhalin cannot be drawn along this fault. It is most likely that this boundary coincides with the Western-Sakhalin fault in the southern areas of the study region. Our data on the Central and Northern Sakhalin does not contradict with the conclusion in [ Savostin et al., 1982 ] concerning this boundary.

Recent mantle degassing recorded by carbonic spring deposits along sinistral strike-slip faults, south-central Australia

The interior of the Australian continent shows evidence for late Quaternary to Recent fault-controlled mantle 3He and CO2 degassing. A series of interconnected NW-striking sinistral faults, the Norwest fault zone (NFZ), in south-central Australia are associated with travertine mounds, the latter show a regular spacing of 50–70 km. U-series ages on 26 samples range from 354±7 to 1.19±0.02ka (2σ errors) and suggest a clustering every ∼3–4 ka since ∼26 ka. Geochemical data demonstrate a remarkable mantle-to-groundwater connection. Isotopic data indicate that the groundwater is circulating to depths >3 km and interacting with Neoproterozoic/Cambrian basement and mantle volatiles. 3He/4He isotope ratios show that the He comes in part from the mantle. This demonstrates that the NFZ cuts through the entire crust and provides pathways for mantle degassing. Scaling relationships suggest that the series of sinistral faults that make up the NFZ are interconnected at depths and have a significant strike length of 60–70 km or more. The NFZ occurs where a major compositional boundary and a significant heat flow anomaly occurs, and a major step in lithospheric thickness has been mapped. We discuss a tectonic model in which recent stress field, heat flow and lithospheric structure in central Australia reactivated a set of steeply dipping Neoproterozoic faults, which may now be growing into a crustal/lithospheric-scale structure.

Are red wood ants (Formica rufa-group) tectonic indicators? A statistical approach

Recent research in seismically active areas indicated that the spatial distributions of geochemical soil gas anomalies and nests of red wood ants (RWA; Formica rufa-group) are strongly correlated. Here we applied a modified Hough Transform (mHT) and an Iterative Mode Detection (IMD) to RWA nest positions, which we mapped in two Southwest German study areas (Black Forest and Bodanrück), to test for statistical significance of correlation with tectonic features. RWA densities in the seismically active study areas reaching up to 1600 nests/100ha are about 100× higher than overall values for Northern and Southern Germany. Since the shape of edges of the study area was found to strongly influence the selection of distribution patterns, all subsequent analyses were carried out for circular study areas. Results of the mHT applied on the RWA nests in both study areas clearly showed several modes which correspond to preferred directions. Centres of the modes further processed by IMD transferred into a GIS as RWA prototype lines showed very dominant directions of RWA nest distributions in right lateral strike-slip mode in WNW-ESE resp. NW-SE direction but also in extension direction caused by the recent main stress field in NW-SE resp. NNW-SSE direction. It could thus be clearly shown that the large scale spatial distribution of RWA nests directly reflects significant components of the present day stress field and its accompanying conjugated shear systems: Linear alignments of RWA nests indicate the course of active degassing faults zones and nest clusters indicate area-wide geochemical anomalies respectively crosscut zones of different fault systems. Furthermore, directions of re-activated shear systems, e.g. from Eocene-Oligocene but also from Late Jurassic that had been modified by overprinting due to changes of the main stress field could be identified. Therefore, RWA prototype lines complement and clarify the shear sense and the tectonic regime identified in previous tectonic studies. The high degree of statistical significance of these results will also allow a rating with former contrasting interpretations as to the drivers of RWA distributions.

Temporal–spatial evolution of low-SiO2 volcanism in the Pleistocene West Eifel volcanic field (West Germany) and relationship to upwelling asthenosphere

The temporal–spatial evolution of low-SiO2 lavas from the Pleistocene West Eifel volcanic field (Central European Volcanic Province) and linked petrogenetic variations are evaluated using 40Ar/39Ar age and geochemical data. Geochronological and petrological evidence is related to the physical structure of the previously established seismologically anomalous asthenosphere interpreted as thermally upwelling mantle (Eifel Plume).Lava flows >480ka (Middle Pleistocene) occur exclusively in the NW of the volcanic field. After a time span of ca. 400ka lacking significant activity, volcanism has migrated to the SE generating flows <80ka (Late Pleistocene). Middle Pleistocene occurrences form a bilaterally structured, SE-striking zone comprising an internal domain of intense activity between ca. 560 and 480ka and an external domain of less intense preceding activity initiated at ca. 720ka. The tectonic pattern corresponds to recent stress field conditions probably analogous to the Pleistocene setting, which may have reactivated major transverse structures of Hercynian origin providing preferred pathways for melt transfer through the brittle crust.At melting depth >70km of parental asthenospheric melts in garnet–spinel peridotite the surface-projected contour of the low-velocity P-wave anomaly coincides with the geographical boundary separating >480ka volcanism in the NW from <80ka volcanism in the SE. Thus, the melting zones of <80ka and >480ka volcanism reside within and beyond the P-wave velocity anomaly, respectively. The coupling between time-space pattern of volcanism and seismological contrast in the mantle sources indicates that volcanic activity is linked to a highly dynamic low-velocity anomaly with lateral and vertical motion rates of 4–5cm/year and up to 6cm/year, respectively. The change in seismological contrast is accompanied by a transition in the petrogenetic style resulting from differently intense thermal erosion of multiply metasomatized lithosphere by upwelling asthenosphere. Asthenosphere-lithosphere interaction is widespread in the NW and subordinate in the SE of the volcanic field, where melts ascended through a more refractory lithosphere which has been affected by preferential melting of hydrous portions by pre-80ka thermal exposure.

Recent stress field in the east of the Russian Plate and the Urals from macro- and mesostructural evidence

This paper presents the first cartographic reconstruction of the recent stress field for the southeastern Russian Plate and the southern Urals based on computer analysis of the extensive body of measurements of mesostructural kinematic markers. Comparison of this reconstruction with macro- and mesostructural data on the dynamics of recent dislocations at the platform leads to the following conclusions: (1) spatial variations of the stress field reflect the pressure on the platform’s lithosphere from the Caucasus-Kopet Dagh collisional orogen and the intraplate linear rise of the recent Urals, presumably related to the Central Asian collision zone; (2) when passing through the heterogeneous crust of the platform, the collision stresses were distorted: in the vertical section, compression decreased upward (especially in strike-slip-stress regime) and even gave way to extension above uplifting hanging wall of thrust faults and crests of swells; in plan view, compression (including in the strike-slip-stress regime) increased at basement uplifts; on the contrary, extension increased near syneclises, as well as lateral squeezing directed here along strike-slip faults; (3) reconstructions based on data variable in scale and type (results of macro- and mesostructural observations processed by differing statistical means with leading use of computer programs) do not contradict but supplement one another. Taken together, they represent the complete pattern of the recent stress state; (4) our results can be used for applied purposes to introduce clarity into the kinematics of the known faults, especially for revealing strike-slip offsets and how the intraplate earthquakes relate to faults and flexures of a certain kinematics. In general, they indicate that tectonodynamic analysis is promising for solving regional tectonic problems.

Modern tectonic stress field deeply in Xuzhou Coal Mine

By inverting fault slip data, the parameters of 12 tectonic stress tensors in the mine region can be determined. The following characteristics can be obtained for recent tectonic stress fields, which are found deep in the study region. The results show that the recent tectonic stress field mainly presents the characteristics of near NWW-SSE maximum compressional stress and near NE-SW minimum extensional stress, while the stress regimes are mainly of strike slip, part of the reverse-fault type. Recent tectonic stress field in the region is characterized by horizontal components. The maximum principal compression stress direction was from NEE to SEE, the average principal compression stress direction was near NWW-SSE maximum compres- sional stress and near NE-SW minimum extensional. The recent tectonic stress field of the studied area can be controlled by a large tectonic stress area.

3D Hydro-mechanical Scenario Analysis to Evaluate Changes of the Recent Stress Field as a Result of Geological CO2 Storage

A numerical scheme coupling TOUGH2 and the hydro-mechanical simulator OpenGeoSys is used to evaluate the deformations and in situ stress changes induced by CO2 injection at a potential storage site located in the Northeast German Basin (NEGB). Scenario analysis shows that under the given assumptions the vertical displacement of the reservoir is negligible and significant changes in the recent stress field are limited to the surrounding of the injection well. The undertaken assessment is generally representative for CO2 storage in the NEGB. However, simulation results suggest that a larger modeling area needs to be considered to avoid boundary effects.

The impact of Outer Western Carpathian nappe tectonics on the recent stress-strain state in the Upper Silesian Coal Basin (Moravosilesian Zone, Bohemian Massif)

The impact of Outer Western Carpathian nappe tectonics on the recent stress-strain state in the Upper Silesian Coal Basin (Moravosilesian Zone, Bohemian Massif) The Upper Silesian Coal Basin (USCB) represents a typical foreland basin developed during the Variscan orogenic phase of the Late Carboniferous. Later, during the Alpine orogeny the Outer Western Carpathian nappes were thrust over the post-Variscan foreland, to which the USCB belongs. Due to this complex tectonic history, redistribution of stress fields occurred in the post-Variscan basement. Furthermore, post-Variscan denudation processes probably also contributed to recent stress regimes. Nevertheless, the impact of the West Carpathian orogeny can be regarded as the most significant influence. The in-situ measurement of recent stress fields in deposits of the Karviná Formation of the USCB and structural analysis of the Czech part of the USCB, has focused on verification of the structure and stress interference of the Carpathian nappes and post-Variscan foreland basement. In the southernmost part of the Karviná Subbasin, the easternmost domain of the USCB, situated in the apical zone of the Variscan accretionary wedge, hydrofracturing and overcoring stress measurements have been recorded in coal seams from selected coal mines. The data have been supplemented by interpretation of focal mechanism solutions of mine induced seismic events. Measurements of recent in-situ stress regimes in the Karviná Formation of the USCB indicate a dominant generally NW-SE orientation of the maximum horizontal compression stress. The results demonstrate that the stress-strain regime in the Karviná Formation in the Variscan Upper Carboniferous basement is significantly influenced by the stress field along the Outer Western Carpathian nappes front. Besides improving our understanding of recent regional stress fields within an area of mutual structural-tectonic interference by both the Variscan and Alpine orogenies, the measured data may contribute to more optimal and safer mining activities in the coal basin.