Reactive Power Regulation Capability Research Articles

Multi-Objective Coordinated Optimization Method of Active and Reactive Power Considering Power Characteristics of Renewable Energy Converters

In new power systems with a high proportion of renewable energy, optimization criteria based solely on economic efficiency or system stability may lead to a reduction in the static stability domain of the system or lead to long-term deviations from economic operation, thus reducing the overall applicability of such methods. This paper proposes a multi-objective active–reactive power coordinated optimization model that considers both economic efficiency and static stability indicators. The goal of the model is to minimize operating costs while optimizing static stability margins. It combines the reactive power support capabilities of converters and other reactive power compensation equipment to ensure safe and economical dispatch of the system. The proposed method is verified through a case study, which shows that this method can make full use of the potential reactive power regulation capability of the converter. At the same time, the economics and stability of the system are significantly improved by using this method. The overall improvement is about is 12.3%.

Research on the overvoltage suppression strategy of single-phase photovoltaic grid-connected systems based on FCS-MPDPC

For the overvoltage problem brought by the access of high-penetration photovoltaic power plants to the low-voltage distribution network, this paper chooses to deal with it by using the reactive power regulation capability of photovoltaic power plant inverters, which reduces the equipment investment in distribution line voltage regulation. Based on the reactive power regulation theory of the inverter, a finite set model predictive direct power control method is proposed by constructing a virtual voltage vector, taking a single-phase cascaded 2H bridge grid-connected inverter as an example, to realize independent control of active and reactive power. By setting different power reference values, the inverter can be made to have two functions: grid-connected per-unit power factor and reactive power control during overvoltage. Finally, the two modes of inverter operation are verified by Simulink simulation, and the verification by example shows that the method can limit the grid-connected voltage deviation to within 7% and meet the requirements of grid-connected regulations.

Analysis and Suppression of Voltage Violation and Fluctuation with Distributed Photovoltaic Integration

In recent years, the violation and fluctuation of system voltage has occurred with greater frequency with the integration of high-penetration distributed photovoltaic generation. In this paper, the voltage violation and fluctuation in a high-penetration distributed photovoltaic integrated system is analyzed, and then a corresponding suppression strategy is proposed. Firstly, based on solar cell and photovoltaic control system models, the influence factors of photovoltaic output are analyzed. Secondly, the voltage violation and fluctuation caused by photovoltaic integration is analyzed, and the quadratic parabola relationship between bus voltage fluctuation and photovoltaic power variation is constructed. Next, according to the virtual synchronous generator characteristic of distributed photovoltaics, a double-hierarchical suppression strategy is proposed to make full use of reactive power regulation capability, which can maintain the symmetry of power supply while meeting standard requirements. The proposed strategy can conveniently realize quick response and support the photovoltaic extensive access. Moreover, with the employment of the proposal, the system voltage violation and fluctuation can be suppressed effectively. Finally, considering the photovoltaic access location, capacity, and partial shading, the effectiveness of the proposed strategy is verified in IEEE 33-bus distribution system with field measured data. After distributed photovoltaic accesses the system, more than 60% of buses appear to have undergone bus voltage violation. With the proposed method, more than 20% of the voltage deviation and more than 6% of the voltage fluctuation are effectively suppressed so that the system voltage can be kept below 1.07 p.u. and the voltage fluctuation can be kept within 4%, meeting the requirements of power quality standards.

Risk Assessment Method for Integrated Transmission–Distribution System Considering the Reactive Power Regulation Capability of DGs

High distributed generation (DG) penetration makes the traditional method of equalizing the distribution power system (DPS) to the PQ load bus in the risk assessment of the transmission power system (TPS) no longer applicable. This paper proposes a risk assessment method for an integrated transmission–distribution system that considers the reactive power regulation capability of the DGs. Based on the DG’s characteristics and network constraints, the regulation capacity is mapped to the boundary buses of the distribution networks. Coordinating the relationship between reactive power and active power, the utilization of the regulation capacity is maximized to reduce the load shedding in the fault analysis of the TPS. Simulation results in the integrated transmission–distribution system illustrate that the effective use of the regulation capacity of the DPS can reduce the risk of the TPS. The method can be applied to the reactive power sources planning and dispatching of power system.

Stability analysis of grid‐connected PV generation with an adapted reactive power control strategy

The static VAR compensator is widely applied in large-scale grid-connected photovoltaic (PV) generation to participate in voltage regulation of power system, which ignores the reactive power regulation capability of PV inverter. In this study, firstly, the constraints of maximum operating current and output voltage's amplitude of PV inverter are considered, and the reactive power regulation capability of the PV generation is evaluated; secondly, an active participation in voltage regulation and control strategy of PV generation is proposed considering reactive power demand of system. This control method through the real-time detection and comparison with reference value of point of common coupling (PCC) voltage, automatically obtain the reactive demand to maintain PCC voltage by PI controller and realises the dynamic adjustment; finally, a time-domain small-signal model for PV generation is established, and based on this small-signal model, eigenvalue analysis is employed to study the influence of the grid strength, operating condition, and the reactive power control strategy on operating stability. Based on the time-domain simulation example in EMTDC/PSCAD, the validity of the theoretical analysis and the feasibility of the control strategy are verified.

The Selection of Online Power Flow Calculation’s Known Quantities

The difference between schedule power flow and online power flow is that the former has no corresponding physical power flow, while the latter is the reappearance of existing physical power flow. Owing to the different premise, the selection of power flow calculation’s known quantities can be different. A schedule power flow schedules physical power flow for power system, so the selection of known quantities has strict requirements, such as active power and reactive power regulation capability. Since the physical power flow exists, the selection of online power flow calculation’s known quantities can be more flexible. For example, we can choose load bus as slack bus or replace PQ bus with PV bus. The example demonstrated that we could locate the stealing electricity buses by choosing load bus as slack bus. Considering that voltage amplitude measurement accuracy is higher than reactive power measurement accuracy, we can replace PQ bus with PV bus and make the power flow calculation results more consistent with the physical power flow. Finally, the examples show that online power flow calculation’s known quantities can be selected flexibly according to the actual situation rather than strictly following the classical power flow calculation requirements.