Reaction Medium Research Articles

Meglumine-based Sustainable Three-component Deep Eutectic Solvent Applicable for the Synthesis of Pyrazolo[5,1-b]quinazoline-3-carboxylates as a Sensing Probe for Cu2+ Ions.

An unprecedented meglumine-based three-component deep eutectic solvent (3c-DES) (MegPAc) was synthesized using meglumine, p-toluenesulfonic acid (PTSA), and acetic acid as a renewable, and non-toxic solvent. The exploitation of the MegPAc as an eco-friendly reaction media to construct a selective and sensitive small organic molecular sensing probe, namely, pyrazolo[5,1-b]quinazoline-3-carboxylates (PQCs) was executed. Captivatingly, the MegPAc served the dual role of solvent and catalyst, and it delivered the title components with 69-94 % yields within 67-150 minutes. Furthermore, a UV-visible study unfolds the selective detection of Cu2+ ions with our synthetic probe 4 ba and resulted in hypsochromic shift due to electrostatic interactions. Additionally, 1H NMR titration study and density functional theory (DFT) calculations were performed to attest the binding mechanism of sensing probe 4 ba and Cu2+ ions. Worthy of mention, this protocol unveils the efficacy of meglumine-based 3c-DES for the first time as a bio-renewable system to synthesize the PQCs.

Organocatalytic Atroposelective Dynamic Kinetic Resolution Involving Ring Manipulations

AbstractAxially chiral architectures exist widely in natural products, biologically relevant molecules, chiral ligands and catalysts as well as functional materials. Therefore, catalytic asymmetric synthesis of atropisomers has become one of the most fast‐growing fields in the community of chemistry and rapid advances have occurred. Among different methods reported, the organocatalytic atroposelective dynamic kinetic resolution (DKR) involving ring manipulations stands out as a cutting‐edge technology to construct axial chirality from the point of atom/step economy. In this DKR strategy, the configurational lability of starting materials originates from chirally‐labile ring structure of cyclic substrates/intermediates or transient ring formation through noncovalent interactions from acyclic substrates. The two atropisomers of starting material are in equilibrium in the reaction medium, ensuring the constant transformation of the less reactive atropisomer into the more reactive one, and then to a single enantiopure product in the presence of an appropriate organocatalyst. This review summarizes recent advancements on this topic, including their scopes, limitations, mechanisms, applications and provides some insights into further developments.

Enhancing photocatalytic performance of atom transfer radical addition (ATRA) reactions in water using immobilized 10-Phenylphenothiazine catalysts on mesoporous silica supports

The development of catalysts is crucial for sustainable chemistry, and heterogeneous catalysis, specifically, can be environmentally friendly and recyclable. Catalyst immobilization in materials has been explored, in which mesoporous silica materials have shown outstanding results in catalysis. Photocatalysis has also gained attention, providing solutions for organic synthesis and late-state functionalization, mainly using homogeneous catalysts and organic solvents. The use of aqueous media for photocatalytic reactions is particularly attractive from a sustainability perspective yet can influence reaction chemoselectivity. However, poor solubility of the organic substrates and the catalyst limits photocatalytic methods in water. Mesoporous silicas are water-stable materials suitable for catalytic applications in such media, including photocatalysis. In this work, we demonstrate an atom transfer radical addition (ATRA) reaction in water using immobilized 10-phenylphenothiazine (PTH) catalyst on different mesoporous silica supports, showing improved photocatalytic performance compared to homogeneous conditions and substrate selectivity depending on the hydrophobicity of the alkene.

Sustainable Biocatalytic Synthesis of a Second-Generation Biolubricant

Background: Biolubricants represent a category of lubricating substances derived from sustainable sources such as vegetable oils, animal fats, and other bio-based materials. They are considered more environmentally friendly than mineral-based lubricants because they are biodegradable and nontoxic. Biolubricants derived from vegetable oils or animal fats were used as first-generation biolubricants. They have limited performance at extreme temperatures, both high and low, as well as low oxidative stability. Substitution of the double bonds by branching improves the performance and stability of the resulting second-generation biolubricants. Methods: In the past, the production of these compounds has relied on the chemical pathway. This method involves elevated temperatures and inorganic catalysts, leading to the necessity of additional purification steps, which decreases environmental sustainability and energy efficiency. A more environmentally friendly alternative, the enzymatic route, has been introduced, in accordance with the principles of “Green Chemistry”. Results: In this paper, the esterification of 2-methylhexanoic acid with 2-octyl-1-dodecanol and its optimization were developed for the first time. The synthesis was conducted within a jacketed batch reactor connected to a thermostatic bath in a solvent-free reaction medium and using Lipozyme® 435 as biocatalyst. Conclusions: The high viscosity index value of this new hyperbranched ester (>200, ASTM D2270) suggests that it may be an excellent biolubricant to be used under extreme temperature conditions. Regarding sustainability, the main green metrics calculated point to an environmentally friendly process.

Activity of a Recombinant Chitinase of the Atta sexdens Ant on Different Forms of Chitin and Its Fungicidal Effect against Lasiodiplodia theobromae.

This study evaluates the activity of a recombinant chitinase from the leaf-cutting ant Atta sexdens (AsChtII-C4B1) against colloidal and solid α- and β-chitin substrates. 1H NMR analyses of the reaction media showed the formation of N-acetylglucosamine (GlcNAc) as the hydrolysis product. Viscometry analyses revealed a reduction in the viscosity of chitin solutions, indicating that the enzyme decreases their molecular masses. Both solid state 13C NMR and XRD analyses showed minor differences in chitin crystallinity pre- and post-reaction, indicative of partial hydrolysis under the studied conditions, resulting in the formation of GlcNAc and a reduction in molecular mass. However, the enzyme was unable to completely degrade the chitin samples, as they retained most of their solid-state structure. It was also observed that the enzyme acts progressively and with a greater activity on α-chitin than on β-chitin. AsChtII-C4B1 significantly changed the hyphae of the phytopathogenic fungus Lasiodiplodia theobromae, hindering its growth in both solid and liquid media and reducing its dry biomass by approximately 61%. The results demonstrate that AsChtII-C4B1 could be applied as an agent for the bioproduction of chitin derivatives and as a potential antifungal agent.

The Role of Reactive Natural Deep Eutectic Solvents in Sustainable Biocatalysis

AbstractDeep eutectic solvents (DESs) advanced in the past decade as the new generation of green and sustainable extraction and reaction media in biorefineries and in a multitude of chemical and biotechnological processes. Particularly, enzyme catalyzed reactions benefit from the specific properties of DESs, which not only ensure good substrate solubility but also enhance enzyme stability and operational efficiency. Recent studies showed that natural deep eutectic solvents (NADESs) comprising choline chloride or betaine as hydrogen bond acceptor and a large spectrum of natural compounds, such as carbohydrates, polyols carboxylic acids, as hydrogen bond donors, can have multiple functions, acting simultaneously as extraction solvent, reaction medium, source of substrate and source as catalyst. This novel approach for the utilization of multifunctional reactive natural deep eutectic solvents (R‐NADESs) in catalytic conversions opens the way to the development of greener biocatalytic and chemo‐catalytic processes, with simpler downstream processing and minimal discarded wastes, which will speed up their durable implementation in industry. This paper reviews the innovative applications of R‐NADESs in biocatalytic reactions for the synthesis of a large diversity of high value chemicals and materials, including biosurfactants, flavors, biobased building blocks and biobased polymers, with highlight on esterification, transesterification, glycerolysis, polymerization, and redox reactions.

Synthesis and morphological control of Ca5(PO4)3Cl and Ca2PO4Cl via the phase transformation of amorphous calcium phosphate in molten chlorides

In the present work, the phase conversion of amorphous calcium phosphate (ACP) in different molten chlorides (LiCl, NaCl, KCl, CaCl2) was investigated in detail. The main synthesis parameters influencing the phase purity and morphological features of the products include the chemical composition of molten salts, the heat treatment temperature and the ACP-to-flux ratio. The selective synthesis of single-phase Ca5(PO4)3Cl or Ca2PO4Cl depends on the content of CaCl2 in the reaction medium. The morphology control of Ca5(PO4)3Cl powders was achieved by varying the KCl/CaCl2 ratio in the flux, resulting in the formation of the particles of different size and shape. The KCl-rich fluxes led to the formation of relatively small nearly spherical particles, whereas the CaCl2-rich fluxes promoted an anisotropic growth of the Ca5(PO4)3Cl crystals resulting in the formation of monodispersed hexagonally-shaped microrods. Whereas the anisotropic growth was observed at relatively low temperature (750 °C) the increase of the reaction temperature up to 1200 °C significantly reduced this effect leading to the formation of the particles with obviously low aspect ratio. The phase crystallinity and purity were analyzed using powder X-ray diffraction, FTIR spectroscopy as well as 31P, 35Cl and 1H solid-state NMR. The morphological features and chemical composition of the synthesized products were studied by SEM/EDX analysis.

An overview on acylation methods of α-chitin

This article overviews the acylation methods of α-chitin developed over the last four decades. The acylation of polysaccharides has been identified as a useful approach for conferring properties such as thermoplasticity. Owing to the poor solubility of α-chitin, its acylation using acid anhydrides and acyl chlorides has been traditionally investigated under heterogeneous conditions in strong acidic media. Although chitin chains depolymerize under acidic conditions, the resultant derivatives exhibit certain properties and functions. Solvents, such as LiCl/N,N-dimethyladcetamide, ionic liquids, and deep eutectic solvents, are suitable for α-chitin dissolution; therefore, acylation methods for α-chitin under homogeneous conditions have been developed using these solvents as reaction media. The functional materialization of the resultant derivatives was achieved by introducing appropriate substituents and controlling their ratios.

Symmetry-Broken Ru Nanoparticles with Parasitic Ru-Co Dual-Single Atoms Overcome the Volmer Step of Alkaline Hydrogen Oxidation.

Efficient dual-single-atom catalysts are crucial for enhancing atomic efficiency and promoting the commercialization of fuel cells, but addressing the sluggish kinetics of hydrogen oxidation reaction (HOR) in alkaline media and the facile dual-single-atom site generation remains formidable challenges. Here, we break the local symmetry of ultra-small ruthenium (Ru) nanoparticles by embedding cobalt (Co) single atoms, which results in the release of Ru single atoms from Ru nanoparticles on reduced graphene oxide (Co1 Ru1,n /rGO). In situ operando spectroscopy and theoretical calculations reveal that the oxygen-affine Co atom disrupts the symmetry of ultra-small Ru nanoparticles, resulting in parasitic Ru and Co dual-single-atom within Ru nanoparticles. The interaction between Ru single atoms and nanoparticles forms effective active centers. The parasitism of Co atoms modulates the adsorption of OH intermediates on Ru active sites, accelerating HOR kinetics through faster formation of *H2 O. As anticipated, Co1 Ru1,n /rGO exhibits ultrahigh mass activity (7.68 A mgRu -1 ) at 50 mV and exchange current density (0.68 mA cm-2 ), which are 6 and 7 times higher than those of Ru/rGO, respectively. Notably, it also displays exceptional durability surpassing that of commercial Pt catalysts. This investigation provides valuable insights into hybrid multi-single-atom and metal nanoparticle catalysis.

Symmetry‐Broken Ru Nanoparticles with Parasitic Ru‐Co Dual‐Single Atoms Overcome the Volmer Step of Alkaline Hydrogen Oxidation

AbstractEfficient dual‐single‐atom catalysts are crucial for enhancing atomic efficiency and promoting the commercialization of fuel cells, but addressing the sluggish kinetics of hydrogen oxidation reaction (HOR) in alkaline media and the facile dual‐single‐atom site generation remains formidable challenges. Here, we break the local symmetry of ultra‐small ruthenium (Ru) nanoparticles by embedding cobalt (Co) single atoms, which results in the release of Ru single atoms from Ru nanoparticles on reduced graphene oxide (Co1Ru1,n/rGO). In situ operando spectroscopy and theoretical calculations reveal that the oxygen‐affine Co atom disrupts the symmetry of ultra‐small Ru nanoparticles, resulting in parasitic Ru and Co dual‐single‐atom within Ru nanoparticles. The interaction between Ru single atoms and nanoparticles forms effective active centers. The parasitism of Co atoms modulates the adsorption of OH intermediates on Ru active sites, accelerating HOR kinetics through faster formation of *H2O. As anticipated, Co1Ru1,n/rGO exhibits ultrahigh mass activity (7.68 A mgRu−1) at 50 mV and exchange current density (0.68 mA cm−2), which are 6 and 7 times higher than those of Ru/rGO, respectively. Notably, it also displays exceptional durability surpassing that of commercial Pt catalysts. This investigation provides valuable insights into hybrid multi‐single‐atom and metal nanoparticle catalysis.

Transitioning from Methanol to Olefins (MTO) toward a Tandem CO2 Hydrogenation Process: On the Role and Fate of Heteroatoms (Mg, Si) in MAPO-18 Zeotypes.

The tandem CO2 hydrogenation to hydrocarbons over mixed metal oxide/zeolite catalysts (OXZEO) is an efficient way of producing value-added hydrocarbons (platform chemicals and fuels) directly from CO2via methanol intermediate in a single reactor. In this contribution, two MAPO-18 zeotypes (M = Mg, Si) were tested and their performance was compared under methanol-to-olefins (MTO) conditions (350 °C, PCH3OH = 0.04 bar, 6.5 gCH3OH h-1 g-1), methanol/CO/H2 cofeed conditions (350 °C, PCH3OH/PCO/PH2 = 1:7.3:21.7 bar, 2.5 gCH3OH h-1 g-1), and tandem CO2 hydrogenation-to-olefin conditions (350 °C, PCO2/PH2 = 7.5:22.5 bar, 1.4-12.0 gMAPO-18 h molCO2-1). In the latter case, the zeotypes were mixed with a fixed amount of ZnO:ZrO2 catalyst, well-known for the conversion of CO2/H2 to methanol. Focus was set on the methanol conversion activity, product selectivity, and performance stability with time-on-stream. In situ and ex situ Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), solid-state nuclear magnetic resonance (NMR), sorption experiments, and ab initio molecular dynamics (AIMD) calculations were performed to correlate material performance with material characteristics. The catalytic tests demonstrated the better performance of MgAPO-18 versus SAPO-18 at MTO conditions, the much superior performance of MgAPO-18 under methanol/CO/H2 cofeeds, and yet the increasingly similar performance of the two materials under tandem conditions upon increasing the zeotype-to-oxide ratio in the tandem catalyst bed. In situ FT-IR measurements coupled with AIMD calculations revealed differences in the MTO initiation mechanism between the two materials. SAPO-18 promoted initial CO2 formation, indicative of a formaldehyde-based decarboxylation mechanism, while CO and ketene were the main constituents of the initiation pool in MgAPO-18, suggesting a decarbonylation mechanism. Under tandem CO2 hydrogenation conditions, the presence of high water concentrations and low methanol partial pressure in the reaction medium led to lower, and increasingly similar, methanol turnover frequencies for the zeotypes. Despite both MAPO-18 zeotypes showing signs of activity loss upon storage due to the interaction of the sites with ambient humidity, they presented a remarkable stability after reaching steady state under tandem reaction conditions and after steaming and regeneration cycles at high temperatures. Water adsorption experiments at room temperature confirmed this observation. The faster activity loss observed in the Mg version is assigned to its harder Mg2+-ion character and the higher concentration of CHA defects in the AEI structure, identified by solid-state NMR and XRD. The low stability of a MgAPO-34 zeotype (CHA structure) upon storage corroborated the relationship between CHA defects and instability.

Avoiding Oxygen Removal for Photochemical Reactions – towards Water as the Solvent

AbstractOxygen removing protocols have long been the standard approach to perform photoreactions. By encapsulating photosensitizers and reactants in tailored supramolecular assemblies, preservation of photoreactivity even in the presence of molecular oxygen can be observed. Herein, we showcase some of the solutions that could render time‐consuming oxygen removal redundant in photochemical synthesis. A focus has been dedicated to aqueous solutions of supramolecular assemblies as potential reaction media. They present an attractive solution possibly useful not only for synthetic photochemical transformations, but also for water purification, bio‐applications or biocatalysis. The included media are membranes, hydrogels, deep eutectic solvents and peptide assemblies.

One-Dimensional Defect Layer Photonic Crystal Sensor for Purity Assessment of Organic Solvents.

This paper presents the design and analysis of a one-dimensional defect layer photonic crystal (1D-DLPC) sensor for the assessment of the purity of chemical solvents with enhanced accuracy. Chemical solvents are frequently used in chemical processes as reaction mediums. It is essential to ascertain its purity since impurities can significantly affect the outcome of the reaction. The structure of the proposed one-dimensional defect layer photonic crystal sensor consists of a defect layer sandwiched between alternate layers of ZnO and SiO2 organized with a certain periodicity. It has been shown that the localized defect modes inside the structure can detect minute refractive index changes based on the degree of impurity of chemical solvents. Simulation studies have been performed through the transfer matrix method (TMM) and the performance of the design is evaluated using several metrics such as sensitivity, full width at half-maximum, figure of merit, quality factor, and dynamic range. Results indicate that the designed one-dimensional defect layer photonic crystal sensor has a significantly high efficiency and is suitable for detecting impure solvents.

Nanocomplex of (−)-epigallocatechin-3-gallate and glycated ovalbumin based on natural deep eutectic solvents: Binding analysis and functional improvement

Natural deep eutectic solvents (NADES) are considered an efficient reaction medium for the production of glycated proteins. By optimizing the Maillard reaction conditions through response surface analysis, a glycation product (GOVA) of ovalbumin (OVA) with high grafting degree (92.2%) was prepared in choline chloride/glucose NADES. The binding information of (−)-epigallocatechin-3-gallate (EGCG) to OVA/GOVA was acquired by fluorescence spectroscopy and molecular docking. The interaction strength of GOVA + EGCG was higher than that of OVA + EGCG. Hydrogen bonding and van der Waals forces were the major driving forces in the binding process. Glycation and EGCG binding reduced the surface hydrophobicity, α-helix content and digestibility of OVA. Compared with OVA, the particle sizes of GOVA and GOVA + EGCG were increased by 54.8% and 87.7%, respectively. In addition, glycation increased the emulsifying activity index and foaming capacity of OVA by 32.6% and 20.0%, respectively, which was further increased in the presence of EGCG. The encapsulation of OVA, especially GOVA, improved the antioxidant activity, stability and bioaccessibility of EGCG. The results suggest that the glycated proteins based on NADES may provide an effective alternative for the protection and transport of bioactive ingredients in the food industries.

Magnetic field-controlled bubble templated CuNi foam films and their performance towards hydrogen evolution reaction in alkaline media

CuNi alloys constitute a promising alternative to noble metals as hydrogen evolution reaction (HER) electrocatalysts, owing to their low cost, high corrosion resistance and environment friendly properties. In this study, homogeneous magnetic fields applied during hydrogen bubble template-assisted electrodeposition of CuNi foam films are shown to have an effect on the resulting morphology and chemical composition of the foam films. The reason for this is the interplay between the applied current density and the orientation of magnetic fields, both influencing the Lorentz forces acting during the growth of the films. With upward Lorentz force, both the pore size and the relative Ni content decrease within the window of studied current densities (−0.7 to −3.5 A cm−2) compared to deposits grown under downward Lorentz force or no applied field. The electrochemical activity towards HER in alkaline media of the CuNi foam films deposited under upward Lorentz force have been investigated by polarization tests, chronopotentiometry and electrochemical impedance spectroscopy. The CuNi foam film with 36 at.% Ni exhibits the highest HER activity, and the overpotential required to reach a HER activity of −10 mA cm−2 is as low as −38 mV vs. reversible hydrogen electrode (RHE).

Electrocatalysis of Poly-Neutral Red for Hydrogen Evolution Reaction in Acidic Media

Electrocatalysis of Poly-Neutral Red for Hydrogen Evolution Reaction in Acidic Media

Reaction engineering blocks ether cleavage for synthesizing chiral cyclic hemiacetals catalyzed by unspecific peroxygenase

Hemiacetal compounds are valuable building blocks in synthetic chemistry, but their enzymatic synthesis is limited and often hindered by the instability of hemiacetals in aqueous environments. Here, we show that this challenge can be addressed through reaction engineering by using immobilized peroxygenase from Agrocybe aegerita (AaeUPO) under neat reaction conditions, which allows for the selective C-H bond oxyfunctionalization of environmentally significant cyclic ethers to cyclic hemiacetals. A wide range of chiral cyclic hemiacetal products are prepared in >99% enantiomeric excess and 95170 turnover numbers of AaeUPO. Furthermore, by changing the reaction medium from pure organic solvent to alkaline aqueous conditions, cyclic hemiacetals are in situ transformed into lactones. Lactams are obtained under the applied conditions, albeit with low enzyme activity. These findings showcase the synthetic potential of AaeUPO and offer a practical enzymatic approach to produce chiral cyclic hemiacetals through C-H oxyfunctionalization under mild conditions.

Structure and Activity of Carbonyl Cluster-Derived PtFe Nanoparticles as Electrocatalysts for the Oxygen Reduction Reaction in Alkaline Media

Structure and Activity of Carbonyl Cluster-Derived PtFe Nanoparticles as Electrocatalysts for the Oxygen Reduction Reaction in Alkaline Media

Deep Eutectic Solvents as Catalysts in the Synthesis of Active Pharmaceutical Ingredients and Precursors

Deep Eutectic Solvents (DESs) have appeared in recent years as an appealing alternative to classical organic solvents, due to their valuable environmental properties. In addition, these compounds, formed by the combination of one hydrogen bond donor with a hydrogen bond acceptor at a defined stoichiometric ratio, present other valuable activities not only as a reaction medium. DESs can also be employed as catalysts through hydrogen-bond interactions in different chemical transformations, thus substituting hazardous reagents and solvents. The search for novel and more environmentally friendly catalysts is an area of interest of pharmaceutical chemists, and therefore, the efforts made in the application of DESs as catalysts in the synthesis of APIs or its precursors are described, focusing mainly on condensations, nucleophilic additions to carbonyl moieties, and multicomponent reactions.

Visible Light‐Induced Redox‐Neutral Selenocyclization of ortho‐Vinylanilides: Oxygen‐Controlled Synthesis of 4H‐3,1‐Benzoxazines

AbstractA visible‐light‐induced selenocyclization of ortho‐vinylanilides to 4H‐3,1‐benzoxazines has been developed under controlled O2 atmosphere. The low O2 content in reaction medium promotes the aerobic selenol oxidation to diselenides for the full use of 2 equiv. selenyl radicals in a redox‐neutral way, avoiding the aerobic oxidation of ortho‐vinylanilides under higher O2 content. The developed visible light‐induced selenocyclization of ortho‐vinylanilides utilizes only visible light with low O2 content, eliminating the use of exogenous photocatalyst and chemical oxidant.