Rational Chemical Design Research Articles

Modeling Ligand Exchange Kinetics in Iridium Complexes Catalyzing SABRE Nuclear Spin Hyperpolarization.

Large signal enhancements can be obtained for NMR analytes using the process of nuclear spin hyperpolarization. Organometallic complexes that bind parahydrogen can themselves become hyperpolarized. Moreover, if parahydrogen and a to-be-hyperpolarized analyte undergo chemical exchange with the organometallic complex it is possible to catalytically sensitize the detection of the analyte via hyperpolarization transfer through spin-spin coupling in this organometallic complex. This process is called Signal Amplification By Reversible Exchange (SABRE). Signal intensity gains of several orders of magnitude can thus be created for various compounds in seconds. The chemical exchange processes play a defining role in controlling the efficiency of SABRE because the lifetime of the complex must match the spin-spin couplings. Here, we show how analyte dissociation rates in the key model substrates pyridine (the simplest six-membered heterocycle), 4-aminopyridine (a drug), and nicotinamide (an essential vitamin biomolecule) can be examined. This is achieved for the most widely employed SABRE motif that is based on IrIMes-derived catalysts by 1H 1D and 2D exchange NMR spectroscopy techniques. Several kinetic models are evaluated for their accuracy and simplicity. By incorporating variable temperature analysis, the data yields key enthalpies and entropies of activation that are critical for understanding the underlying SABRE catalyst properties and subsequently optimizing behavior through rational chemical design. While several studies of chemical exchange in SABRE have been reported, this work also aims to establish a toolkit on how to quantify chemical exchange in SABRE and ensure that data can be compared reliably.

Organic cations in halide perovskite solid solutions: exploring beyond size effects.

Halide perovskites are a class of materials of consolidated optoelectronic and electrochemical applications, reaching efficiencies compared to established materials in respective fields. In this scenario, the design and understanding of composition-structure-property relations is imperative. In solid solutions containing mixed cations, some direct relations between the sizes of the substituents and the properties of perovskites are generally observed. However, in several cases, these relations are not observed, implying that other characteristics of these cations play a major role. Despite its importance, this understanding has not been comprehensively deepened. To address this issue, we synthesized and characterized the structure, electrical behavior, and stability of methylammonium lead iodide-based perovskites with equal amounts of the substituents guanidinium, ethylammonium, and acetamidinium. These three large organic cations have essentially equal sizes but other remarkably different characteristics, such as the number of N-H bonds, intrinsic dipole moment, and order of C-N bonds. Herein, we show that these cations have dramatically different effects over important fundamental and applied properties of resulting perovskites, including the orthorhombic-to-tetragonal and tetragonal-to-cubic phase transitions, microstructural development, ionic conductivity, I-V hysteresis, electronic carrier mobility, and stability against light-induced degradation. These effects are correlated with the characteristics of the large substituent cations and help pave the way for a better rational chemical design of halide perovskites.

Modifying cellular properties via rational chemical design for unnatural oxygen reduction electrocatalysis of a cell

It is of great theoretical and practical significance to break through the evolution of natural cells and confer new catalytic properties via chemical modification to catalyze unnatural chemical reactions in biocatalytic synthesis.

Abstract B157: Preclinical evaluation of the blood-brain barrier permeability and intracranial efficacy of the next-generation RET inhibitor Vepafestinib

Abstract Background. Drug resistance and central nervous system (CNS) metastasis often hampers response to precision therapy for RET-rearranged solid tumors. Vepafestinib (Vepa) is a clinical-stage, potent and selective RET tyrosine-kinase inhibitor (TKI) with proven activity against on-target resistance mutations that arise post first-generation RET TKI. Here, we utilized an array of structural and pharmacokinetic methods to determine blood-brain barrier (BBB) permeability of vepa compared with other RET TKIs. Furthermore, we correlate BBB penetrability of RET inhibitors with in vivo efficacy in preclinical models of RET-rearranged intracranial solid tumors. Methods. RET inhibitors were generated by rational chemical design to identify agents which penetrate BBB more effectively than currently approved RET TKIs, and with reduced efflux transporter susceptibility. Transcellular transport assays were conducted in LLC-PK1 and MDCK II cells expressing P-gp and BCRP, respectively. Brain penetrability was assessed by total (Kp) and unbound (Kp,uu) brain:plasma concentration ratios in male Balb/c mice and microdialysis studies in freely-moving male Wistar rats. Models of CNS metastasis were generated by implanting cells labelled with luciferase into the cerebellum of mice. Studies were conducted in comparison with selpercatinib (Selp), pralsetinib (Pral) and TPX-0046. Results. Assessment of Kp and Kp,uu parameters of analogs revealed an excellent structure-activity relationship where modification at the 6-position of the pyrrolopyrimidine core resulted in improved BBB penetrability. The analog with the most favorable physiochemical and biological properties was Vepa. Vepa showed poor susceptibility to P-gp and BCRP-mediated efflux and better CNS penetrability (Kp,uu: 1.3) and retention than Sel, Pral and TPX-0046. The ratio of the observed concentrations of Vepa in microdialysates from the prefrontal cortex, cerebrospinal fluid (CSF) and plasma free fraction was approximately 1:1:1; these ratios were maintained from 2h to 6.5h after Vepaadministration (up to 8h for CSF). Importantly, Vepa was more effective than Selp at causing regression of intracranial xenograft tumors of RET fusion-driven malignancies (lung adenocarcinoma and sarcoma), thus extending survival of tumor-bearing animals. Common first-generation RET TKI resistance mutations at the solvent front (G810A/C/S/R), gatekeeper (V804L/M), hinge (Y806C) and roof (L730Q/R) regions remained sensitive to Vepa. Vepa was more selective than Selp, Pral and TPX-0046, inhibiting only RET when profiled against a panel of 256 kinases. In contrast, Selp, Pral and TPX-0045 also inhibited VEGFR2, and 4, 11 and 39 additional kinases, respectively. Conclusions. Vepafestinib is a structurally distinct and specific RET inhibitor, with superior brain penetration and retention kinetics. It is more effective than selpercatinib in controlling CNS disease. Vepafestinib is currently undergoing phase 1 and 2 clinical trial for patients with advanced solid tumors with RET alterations (margaRET, NCT04683250). Citation Format: Igor Odintsov, Kentaro Wakayama, Tom Zhang, Satoru Iguchi, Masanori Kato, Allan JW Lui, Inna Khodos, Morana Vojnic, Claudio Giuliano, Annalisa Bonifacio, Monika A Davare, Elisa de Stanchina, Emanuela Lovati, Marc Ladanyi, Isao Miyazaki, Romel Somwar. Preclinical evaluation of the blood-brain barrier permeability and intracranial efficacy of the next-generation RET inhibitor Vepafestinib [abstract]. In: Proceedings of the AACR-NCI-EORTC Virtual International Conference on Molecular Targets and Cancer Therapeutics; 2023 Oct 11-15; Boston, MA. Philadelphia (PA): AACR; Mol Cancer Ther 2023;22(12 Suppl):Abstract nr B157.

Stabilization of Guanidinate Anions [CN3]5- in Calcite-Type SbCN3.

The stabilization of nitrogen-rich phases presents a significant chemical challenge due to the inherent stability of the dinitrogen molecule. This stabilization can be achieved by utilizing strong covalent bonds in complex anions with carbon, such as cyanide CN- and NCN2-carbodiimide, while more nitrogen-rich carbonitrides are hitherto unknown. Following a rational chemical design approach, we synthesized antimony guanidinate SbCN3 at pressures of 32-38 GPa using various synthetic routes in laser-heated diamond anvil cells. SbCN3, which is isostructural to calcite CaCO3, can be recovered under ambient conditions. Its structure contains the previously elusive guanidinate anion [CN3]5-, marking a fundamental milestone in nitridocarbonatechemistry. The crystal structure of SbCN3 was solved and refined from synchrotron single-crystal X-ray diffraction data and was fully corroborated by theoretical calculations, which also predict that SbCN3 has a direct band gap with the value 2.20 eV. This study opens a straightforward route to the entire new family of inorganic nitridocarbonates.

Stabilization of Guanidinate Anions [CN3]5− in Calcite‐Type SbCN3

AbstractThe stabilization of nitrogen‐rich phases presents a significant chemical challenge due to the inherent stability of the dinitrogen molecule. This stabilization can be achieved by utilizing strong covalent bonds in complex anions with carbon, such as cyanide CN− and NCN2− carbodiimide, while more nitrogen‐rich carbonitrides are hitherto unknown. Following a rational chemical design approach, we synthesized antimony guanidinate SbCN3 at pressures of 32–38 GPa using various synthetic routes in laser‐heated diamond anvil cells. SbCN3, which is isostructural to calcite CaCO3, can be recovered under ambient conditions. Its structure contains the previously elusive guanidinate anion [CN3]5−, marking a fundamental milestone in carbonitride chemistry. The crystal structure of SbCN3 was solved and refined from synchrotron single‐crystal X‐ray diffraction data and was fully corroborated by theoretical calculations, which also predict that SbCN3 has a direct band gap with the value of 2.20 eV. This study opens a straightforward route to the entire new family of inorganic nitridocarbonates.

Vibrational and Structural Properties of Two-Dimensional Tin Mixed-Halide Perovskites

The emergence of two-dimensional (2D) hybrid metal-halide perovskites has garnered significant attentions for optoelectronic devices and light-emitting applications. Since the toxicity of lead-based perovskites could potentially be harmful to the environment, several works have attempted to change the active metal to tin (Sn). Here, we investigate the characterization of (PEA)2SnBrxI4-x mixed halide perovskites using X-ray fluorescence (XRF), X-ray diffraction (XRD), and Fourier transform infrared (FTIR) spectroscopy. Qualitative XRF analysis suggests the presence of tin, bromine and iodine emissions under the mid-Z and high-Z ranges. In mid-Z range, Br-Kα peak appeared on 11.96 keV and Br-Kβ was detected on 13.3 keV. Meanwhile Sn-Kα, I-Kα, I-Kβ1, and I-Kβ2 peaks were detected in high-Z range on 25.24 keV, 28.6 keV, 32.35 keV and 33.11 keV, respectively. Thus, the elemental composition of mixed halide components exhibits an indicative control that bromine-rich or iodine-rich can be synthesized via rational chemical design. XRD pattern display a systematic progression at the peak 5.18° (corresponds to (002) plane), which unambiguously demonstrated the feasibility to tune halide composition in tin-based hybrid perovskite. It also confirms that (2D) hybrid metal-halide with tunable halide have identical structure for both bromine-rich and iodine-rich composition. Furthermore, the 2θ peaks slightly shifted to lower angle with increasing bromine composition. The presence of C−I bonding on ~500 cm-1 and C-Br bond on ~600 cm-1 in FTIR spectra highlights the functional group of organic cations. These experimental results promote a foundation to implement compositional engineering on 2D-tin mixed-halide perovskites for optoelectronics and scintillators.

Chemical Design of Pb-Free Relaxors for Giant Capacitive Energy Storage.

Dielectric capacitors have captured substantial attention for advanced electrical and electronic systems. Developing dielectrics with high energy density and high storage efficiency is challenging owing to the high compositional diversity and the lack of general guidelines. Herein, we propose a map that captures the structural distortion (δ) and tolerance factor (t) of perovskites to design Pb-free relaxors with extremely high capacitive energy storage. Our map shows how to select ferroelectric with large δ and paraelectric components to form relaxors with a t value close to 1 and thus obtaining eliminated hysteresis and large polarization under a high electric breakdown. Taking the Bi0.5Na0.5TiO3-based solid solution as an example, we demonstrate that composition-driven predominant order-disorder characteristic of local atomic polar displacements endows the relaxor with a slushlike structure and strong local polar fluctuations at several nanoscale. This leads to a giant recoverable energy density of 13.6 J cm-3, along with an ultrahigh efficiency of 94%, which is far beyond the current performance boundary reported in Pb-free bulk ceramics. Our work provides a solution through rational chemical design for obtaining Pb-free relaxors with outstanding energy-storage properties.

Rational Chemical Design of Molecular Glue Degraders.

Targeted protein degradation with molecular glue degraders has arisen as a powerful therapeutic modality for eliminating classically undruggable disease-causing proteins through proteasome-mediated degradation. However, we currently lack rational chemical design principles for converting protein-targeting ligands into molecular glue degraders. To overcome this challenge, we sought to identify a transposable chemical handle that would convert protein-targeting ligands into molecular degraders of their corresponding targets. Using the CDK4/6 inhibitor ribociclib as a prototype, we identified a covalent handle that, when appended to the exit vector of ribociclib, induced the proteasome-mediated degradation of CDK4 in cancer cells. Further modification of our initial covalent scaffold led to an improved CDK4 degrader with the development of a but-2-ene-1,4-dione ("fumarate") handle that showed improved interactions with RNF126. Subsequent chemoproteomic profiling revealed interactions of the CDK4 degrader and the optimized fumarate handle with RNF126 as well as additional RING-family E3 ligases. We then transplanted this covalent handle onto a diverse set of protein-targeting ligands to induce the degradation of BRD4, BCR-ABL and c-ABL, PDE5, AR and AR-V7, BTK, LRRK2, HDAC1/3, and SMARCA2/4. Our study undercovers a design strategy for converting protein-targeting ligands into covalent molecular glue degraders.

Quinoid-Thiophene-Based Covalent Organic Polymers for High Iodine Uptake: When Rational Chemical Design Counterbalances the Low Surface Area and Pore Volume.

A novel 2D covalent organic polymer (COP), based on conjugated quinoid-oligothiophene (QOT) and tris(aminophenyl) benzene (TAPB) moieties, is designed and synthesized (TAPB-QOT COP). Some DFT calculations are made to clarify the equilibrium between different QOT isomers and how they could affect the COP formation. Once synthetized, the polymer has been thoroughly characterized by spectroscopic (i.e., Raman, UV-vis), SSNMR and surface (e.g., SEM, BET) techniques, showing a modest surface area (113 m2 g-1) and micropore volume (0.014 cm3 g-1 with an averaged pore size of 5.6-8 Å). Notwithstanding this, TAPB-QOT COP shows a remarkably high iodine (I2) uptake capacity (464 %wt) comparable to or even higher than state-of-the-art porous organic polymers (POPs). These auspicious values are due to the thoughtful design of the polymer with embedded sulfur sites and a conjugated scaffold with the ability to counterbalance the relatively low pore volumes. Indeed, both morphological and Raman data, supported by computational analyses, prove the very high affinity between the S atom in our COP and the I2. As a result, TAPB-QOT COP shows the highest volumetric I2 uptake (i.e., the amount of I2 uptaken per volume unit) up to 331 g cm-3 coupled with a remarkably high reversibility (>80% after five cycles).

Achieving Narrowed Bandgaps and Blue‐Light Excitability in Zero‐Dimensional Hybrid Metal Halide Phosphors via Introducing Cation–Cation Bonding

Zero‐dimensional (0D) hybrid metal halides, which consist of organic cations and isolated inorganic metal halide anions, have emerged as phosphors with efficient broadband emissions. However, these materials generally have too wide bandgaps and thus cannot be excited by blue light, which hinders their applications for efficient white light‐emitting diodes (WLEDs). The key to achieving a blue‐light‐excitable 0D hybrid metal halide phosphor is to reduce the fundamental bandgap by rational chemical design. In this work, we report two designed hybrid copper(I) iodides, (Ph3MeP)2Cu4I6 and (Cy3MeP)2Cu4I6, as blue‐light‐excitable yellow phosphors with ultrabroadband emission. In these compounds, the [Cu4I6]2− anion forms an I6 octahedron centered on a cationic Cu4 tetrahedron. The strong cation–cation bonding within the unique cationic Cu4 tetrahedra enables significantly lowered conduction band minimums and thus narrowed bandgaps, as compared to other reported hybrid copper(I) iodides. The ultrabroadband emission is attributed to the coexistence of free and self‐trapped excitons. The WLED using the [Cu4I6]2− anion‐based single phosphor shows warm white light emission, with a high luminous efficiency of 65 lm W−1 and a high color rendering index of 88. This work provides strategies to design narrow‐bandgap 0D hybrid metal halides and presents two first examples of blue‐light‐excitable 0D hybrid metal halide phosphors for efficient WLEDs.

Nickel-Containing Perovskites, PrNi0.4Fe0.6O3-δ and PrNi0.4Co0.6O3-δ, as Potential Electrodes for Protonic Ceramic Electrochemical Cells.

Protonic ceramic fuel cells (PCFCs) offer a convenient means of converting chemical energy into electricity with high performance and efficiency at low- and intermediate-temperature ranges. However, in order to ensure good life-time stability of PCFCs, it is necessary to ensure rational chemical design in functional materials. Within the present work, we propose new Ni-based perovskite phases of PrNi0.4M0.6O3–δ (where M = Co, Fe) for potential utilization in protonic ceramic electrochemical cells. Along with their successful synthesis, functional properties of the PrNi0.4M0.6O3–δ materials, such as chemical compatibility with a number of oxygen-ionic and proton-conducting electrolytes, thermal expansion behavior, electrical conductivity, and electrochemical behavior, were comprehensively studied. According to the obtained data, the Co-containing nickelate exhibits excellent conductivity and polarization behavior; on the other hand, it demonstrates a high reactivity with all studied electrolytes along with elevated thermal expansion coefficients. Conversely, while the iron-based nickelate had superior chemical and thermal compatibility, its transport characteristics were 2–5 times worse. Although, PrNi0.4Co0.6O3–δ and PrNi0.4Fe0.6O3–δ represent some disadvantages, this work provides a promising pathway for further improvement of Ni-based perovskite electrodes.

Air-Stable Dy(III)-Macrocycle Enantiomers: From Chiral to Polar Space Group

Air-Stable Dy(III)-Macrocycle Enantiomers: From Chiral to Polar Space Group

Boosting Natural Killer Cell Therapies in Glioblastoma Multiforme Using Supramolecular Cationic Inhibitors of Heat Shock Protein 90.

Allogeneic natural killer (aNK) cell adoptive therapy has the potential to dramatically impact clinical outcomes of glioblastoma multiforme (GBM). However, in order to exert therapeutic activity, NK cells require tumor expression of ligands for activating receptors, such as MHC Class I peptide A/B (MICA/B) and ULBPs. Here, we describe the use of a blood–brain barrier (BBB) permissive supramolecular cationic drug vehicle comprising an inhibitor of the chaperone heat shock protein 90 (Hsp90), which sustains a cytotoxic effect on GBM cells, boosts the expression of MICA/B and ULBPs on the residual population, and augments the activity of clinical-grade aNK cells (GTA002). First, we identify Hsp90 mRNA transcription and gain of function as significantly upregulated in GBM compared to other central nervous system tumors. Through a rational chemical design, we optimize a radicicol supramolecular prodrug containing cationic excipients, SCI-101, which displays >2-fold increase in relative BBB penetration compared to less cationic formulations in organoids, in vitro. Using 2D and 3D biological models, we confirm SCI-101 sustains GBM cytotoxicity 72 h after drug removal and induces cell surface MICA/B protein and ULBP mRNA up to 200% in residual tumor cells compared to the naked drug alone without augmenting the shedding of MICA/B, in vitro. Finally, we generate and test the sequential administration of SCI-101 with a clinical aNK cell therapy, GTA002, differentiated and expanded from healthy umbilical cord blood CD34+ hematopoietic stem cells. Using a longitudinal in vitro model, we demonstrate >350% relative cell killing is achieved in SCI-101–treated cell lines compared to vehicle controls. In summary, these data provide a first-of-its-kind BBB-penetrating, long-acting inhibitor of Hsp90 with monotherapy efficacy, which improves response to aNK cells and thus may rapidly alter the treatment paradigm for patients with GBM.

PharmacoSTORM nanoscale pharmacology reveals cariprazine binding on Islands of Calleja granule cells

Immunolabeling and autoradiography have traditionally been applied as the methods-of-choice to visualize and collect molecular information about physiological and pathological processes. Here, we introduce PharmacoSTORM super-resolution imaging that combines the complementary advantages of these approaches and enables cell-type- and compartment-specific nanoscale molecular measurements. We exploited rational chemical design for fluorophore-tagged high-affinity receptor ligands and an enzyme inhibitor; and demonstrated broad PharmacoSTORM applicability for three protein classes and for cariprazine, a clinically approved antipsychotic and antidepressant drug. Because the neurobiological substrate of cariprazine has remained elusive, we took advantage of PharmacoSTORM to provide in vivo evidence that cariprazine predominantly binds to D3 dopamine receptors on Islands of Calleja granule cell axons but avoids dopaminergic terminals. These findings show that PharmacoSTORM helps to quantify drug-target interaction sites at the nanoscale level in a cell-type- and subcellular context-dependent manner and within complex tissue preparations. Moreover, the results highlight the underappreciated neuropsychiatric significance of the Islands of Calleja in the ventral forebrain.

Chemical Design and Magnetic Ordering in Thin Layers of 2D Metal-Organic Frameworks (MOFs).

Through rational chemical design, and thanks to the hybrid nature of metal–organic frameworks (MOFs), it is possible to prepare molecule-based 2D magnetic materials stable at ambient conditions. Here, we illustrate the versatility of this approach by changing both the metallic nodes and the ligands in a family of layered MOFs that allows the tuning of their magnetic properties. Specifically, the reaction of benzimidazole-type ligands with different metal centers (MII = Fe, Co, Mn, Zn) in a solvent-free synthesis produces a family of crystalline materials, denoted as MUV-1(M), which order antiferromagnetically with critical temperatures that depend on M. Furthermore, the incorporation of additional substituents in the ligand results in a novel system, denoted as MUV-8, formed by covalently bound magnetic double layers interconnected by van der Waals interactions, a topology that is very rare in the field of 2D materials and unprecedented for 2D magnets. These layered materials are robust enough to be mechanically exfoliated down to a few layers with large lateral dimensions. Finally, the robustness and crystallinity of these layered MOFs allow the fabrication of nanomechanical resonators that can be used to detect—through laser interferometry—the magnetic order in thin layers of these 2D molecule-based antiferromagnets.

Temperature Dependence of Spin-Phonon Coupling in [VO(acac)2]: A Computational and Spectroscopic Study.

Molecular electronic spins are good candidates as qubits since they are characterized by a large tunability of their electronic and magnetic properties through a rational chemical design. Coordination compounds of light transition metals are promising systems for spin-based quantum information technologies, thanks to their long spin coherence times up to room temperature. Our work aims at presenting an in-depth study on how the spin–phonon coupling in vanadyl-acetylacetonate, [VO(acac)2], can change as a function of temperature using terahertz time-domain spectroscopy and density functional theory (DFT) calculations. Powder THz spectra were recorded between 10 and 300 K. The temperature dependence of vibrational frequencies was then accounted for in the periodic DFT calculations using unit-cell parameters measured at two different temperatures and the optimized ones, as usually reported in the literature. In this way, it was possible to calculate the observed THz anharmonic frequency shift with high accuracy. The overall differences in the spin–phonon coupling magnitudes as a function of temperature were also highlighted showing that the computed trends have to be ascribed to the anisotropic variation of cell parameters.

The role of the electrokinetic charge of neurotrophis-based nanocarriers: protein distribution, toxicity, and oxidative stress in in vitro setting

BackgroundThe rational chemical design of nanoparticles can be readily controlled and optimized by quantitatively studying protein adsorption at variously charged polymer carriers, determining their fate in biological fluids. We manufactured brain-derived neurotrophic factor (BDNF) -based electrostatic nanocomplexes with a different type of dendrimer core (anionic or cationic), encapsulated or not in polyethylene glycol (PEG), and studied their physicochemical properties and behavior in a biological setting. We investigated whether the electrokinetic charge of dendrimer core influences BDNF loading and desorption from the nanoparticle and serves as a determinant of nanoparticles’ behavior in in vitro setting, influencing mitochondrial dysfunction, lipid peroxidation, and general nanoparticles’ cellular toxicity.ResultsWe found that the electrokinetic charge of the dendrimer core influences nanoparticles in terms of BDNF release profile from their surfaces and their effect on cell viability, mitochondrial membrane potential, cell phenotype, and induction of oxidative stress. The electrostatic interaction of positively charged core of nanoparticles with cell membranes increases their cytotoxicity, as well as serious phenotype alterations compared to negatively charged nanoparticles core in neuron-like differentiated human neuroblastoma cells. Moreover, PEG adsorption at nanoparticles with negatively charged core presents a distinct decrease in metabolic cell activity. On the contrary, charge neutralization due to PEG adsorption on the surface of nanoparticles with positively charged core does not reduce their cytotoxicity, makes them less biocompatible with differentiated cells, and presumably shows non-specific toxicity.ConclusionsThe surface charge transformation after adsorption of protein or polyelectrolyte during nanocarriers formulation has an important role not only in designing nanomaterials with potent neuroprotective and neuroregenerative properties but also in applying them in a cellular environment.Graphic abstract

The development of novel glucocorticoid receptor antagonists: From rational chemical design to therapeutic efficacy in metabolic disease models

Glucocorticoids regulate numerous processes in human physiology, but deregulated or excessive glucocorticoid receptor (GR) signaling contributes to the development of various pathologies including metabolic syndrome. For this reason, GR antagonists have considerable therapeutic value. Yet, the only GR antagonist that is clinically approved to date - mifepristone - exhibits cross-reactivity with other nuclear steroid receptors like the progesterone receptor. In this study, we set out to identify novel selective GR antagonists by combining rational chemical design with an unbiased in vitro and in vivo screening approach. Using this pipeline, we were able to identify CORT125329 as the compound with the best overall profile from our octahydro series of novel GR antagonists, and demonstrated that CORT125329 does not exhibit cross-reactivity with the progesterone receptor. Further in vivo testing showed beneficial activities of CORT125329 in models for excessive corticosterone exposure and short- and long-term high-fat diet-induced metabolic complications. Upon CORT125329 treatment, most metabolic parameters that deteriorated upon high-fat diet feeding were similarly improved in male and female mice, confirming activity in both sexes. However, some sexually dimorphic effects were observed including male-specific antagonism of GR activity in brown adipose tissue and female-specific lipid lowering activities after short-term CORT125329 treatment. Remarkably, CORT125329 exhibits beneficial metabolic effects despite its lack of GR antagonism in white adipose tissue. Rather, we propose that CORT125329 treatment restores metabolic activity in brown adipose tissue by stimulating lipolysis, mitochondrial activity and thermogenic capacity. In summary, we have identified CORT125329 as a selective GR antagonist with strong beneficial activities in metabolic disease models, paving the way for further clinical investigation.

Electronic and Optical Modulation of Metal-Doped Hybrid Organic–Inorganic Perovskites Crystals by Post-Treatment Control

Recently, considerable interest in the fields of photovoltaics, light emission, and photodetection absorbers has centered on hybrid organic–inorganic perovskites (HOIPs). Here, we report a combined photoluminescence and high-resolution photoemission study to investigate the defect-site passivation of the B-site methylammonium lead bromide perovskites (B site = In3+, Sr2+, and Li+). A distinctive behavior of the optical response is revealed by means of temperature-dependent time-resolved photoluminescence (TR-PL) measurements. Upon mild argon treatment, the initial thermal quenching rate with respect to the radiative transition rate (Γ0/Γv) ratio and thermal quenching activation energy (ΔEq) of Sr-doped MAPbBr3 is reduced by an order of magnitude. The average charge carrier lifetime (τave) of Sr-doped MAPbBr3 after treatment is significantly improved from 36 to 77 ns, respectively. Moreover, the occupied state of metal-doped MAPbBr3 probed by ultraviolet photoemission spectroscopy (UPS) indicates tunable charge transfer based on rational chemical design. Supported by density functional theory, small band gap changes are observed across Sr-, In-, and Li-doped cases. This work improves our understanding of the photophysics of HOIPs with the possible future aim of improving the stability of emergent perovskite materials by post-treatment control.