Ratio Of Cross Sections Research Articles

Measurements of jet cross-section ratios in 13 TeV proton-proton collisions with ATLAS

Measurements of jet cross-section ratios between inclusive bins of jet multiplicity are performed in 140 fb−1 of proton-proton collisions with s=13 TeV center-of-mass energy, recorded with the ATLAS detector at CERN’s Large Hadron Collider. These ratios are constructed from double-differential cross-section measurements that are made in bins of jet multiplicity and other observables that are sensitive the energy scale and angular distribution of radiation due to the strong interaction in the final state. Additionally, the scalar sum of the two leading jets’ transverse momenta is measured triple differentially, in bins of the third jet’s transverse momentum and of jet multiplicity. These measurements are unfolded to account for acceptance and detector-related effects. The measured distributions are used to construct ratios of the inclusive jet-multiplicity bins, which have been shown to be sensitive to the strong coupling αS while being less sensitive than other observables to systematic uncertainties and parton distribution functions. The measured distributions are compared with state-of-the-art QCD calculations, including next-to-next-to-leading-order predictions for two- and three-jet events. These predictions are generally found to model the data well and perform best in bins with a modest requirement on the third jet’s transverse momentum. Significant differences between data and Monte Carlo predictions are observed in events with large rapidity gaps and invariant masses of the leading jet pair. Studies leading to reduced jet energy scale uncertainties significantly improve the precision of this work and are documented herein. © 2024 CERN, for the ATLAS Collaboration 2024 CERN

Anomalous wavefront control of Lamb wave with metasurfaces via superposed prism resonance

As a special branch of metamaterials characterized by phase discontinuity, elastic metasurfaces have presented extraordinary capacity for elastic wave manipulation. This class of metamaterials has received extensive attention in recent years. In this paper, a subwavelength elastic metasurface with locally resonant prisms is employed to steer the propagation of the A0 Lamb wave. Based on the dispersion curve and transmission ratio, we establish that the resonant feature of prisms is influenced by the diagonal ratio of cross section. By gradually tuning the diagonal ratio of prism cross section, the pattern of resonance modes and the mechanism of resonance superposition are clarified. In this regard, two different resonant modes can be superimposed at a certain frequency. A complete 2 π phase shift that is crucial for redirecting wave propagation can therefore be realized. To have a broader working frequency range, the influence of prism height on the resonance superposed frequency and the effect of plate thickness on the incident flexural wave are explored. Based on the generalized Snell’s law, negative refraction is verified numerically through a metasurface assembled from unit cells with constant phase change. In addition, other wavefront modulations such as eccentric focusing, nonparaxial propagation are also demonstrated. This novel design introduces new degrees of freedom in many engineering applications such as seismic wave protection, structural health monitoring and energy harvesting.

Measurement of J/ψ and [formula omitted] production in p + p and p + d interactions at 120 GeV

We report the p+p and p+d differential cross sections measured in the SeaQuest experiment for J/ψ and ψ(2S) production at ▪ beam energy covering the forward x-Feynman (xF) range of 0.5<xF<0.9. The measured cross sections are in good agreement with theoretical calculations based on the nonrelativistic QCD (NRQCD) using the long-distance matrix elements deduced from a recent global analysis of proton- and pion-induced charmonium production data. The σψ(2S)/σJ/ψ cross section ratios are found to increase as xF increases, indicating that the qq¯ annihilation process has larger contributions in the ψ(2S) production than the J/ψ production. The σpd/2σpp cross section ratios are observed to be significantly different for the Drell-Yan process and J/ψ production, reflecting their different production mechanisms. We find that the σpd/2σpp ratios for J/ψ production at the forward xF region are sensitive to the d¯/u¯ flavor asymmetry of the proton sea, analogous to the Drell-Yan process. The transverse momentum (pT) distributions for J/ψ and ψ(2S) production are also presented and compared with data collected at higher center-of-mass energies.

Simultaneous measurement of temperature and C2H4 concentration in hydrocarbon flames using interference-immune differential absorption spectroscopy at 3.3 μm

In diagnostic applications based on tunable diode laser absorption spectroscopy, the measurement of target substances can be influenced by factors such as background thermal radiation in the combustion environment, extinction caused by solid or liquid particles, and other interfering absorptions. In this work, we developed a differential absorption diagnostic technique based on wavelength pairs, utilizing an interband cascade laser near 3.3 μm to simultaneously measure temperature and C2H4 concentration in hydrocarbon flames. Based on a detailed study of the C2H4 spectrum in this region and considering the optimal standard for spectral lines, two wavelength pairs were selected. The temperature is determined by the ratio of the absorption cross-sections of two wavelength pairs, and the C2H4 concentration is inferred based on the wavelength pair with higher differential absorption. In the initial stage, the system’s accuracy was verified in high-temperature static conditions (T = 300–800 K, P = 1 atm), and continuous time series measurements demonstrated the system’s stability. The limit of detection achieved by Allan-Werle variance analysis is 2.5 ppm at the optimal average time of 100 s. Subsequently, measurements were taken in a hydrocarbon flame. The obtained results indicate an average deviation of 1.021 % between the measured temperature in the flame and the reference value, with a standard deviation of 1.381 % for concentration measurement. All the measurements show that the system can be potentially applied to combustion diagnosis.

Solar photovoltaic fed synchronous reluctance motor with optimized rotor flux barriers: Design and performance optimization

This paper focuses on enhancing the design of a synchronous reluctance motor (SyRM) specifically tailored for solar photovoltaic (PV) water pumping applications. With growing adoption of green technologies and renewable energy sources, particularly solar power, there is a need to boost the motor's efficiency to meet the demands of such applications. Utilizing renewable energy for water pumping offers significant advantages in terms of sustainability, scalability, and environmentally friendly energy generation. Achieving optimal efficiency and reliability is paramount, as it reduces overall system cost and enhances reliability. SyRM design methodology in this study integrates both analytical and finite element (FE) procedures. Unlike other motor types, the rotor structure of the SyRM does not include any cages, magnets, or windings, resulting in a robust, reliable, and cost-effective manufacturing process. In SyRM, the rotor is constructed solely with barriers, which significantly impact torque shaping, torque ripple content, and power factor. This paper primarily examines the influence of various air-barrier shapes on different motor performance parameters, such as average torque, torque ripple, saturation, cross-section, and saliency ratio. The selected motor configuration for this investigation is a 4-pole, 100 Hz synchronous reluctance motor with 24 stator slots. The accuracy of the FE analysis findings is validated through a prototype of designed SyRM, followed by comprehensive performance evaluations conducted in a controlled laboratory environment. Additionally, this paper addresses an improved control strategy for a SyRM-based photovoltaic (PV) water pumping system. It eliminates the need for a speed controller in the position sensor-less field-oriented control (FOC) of SyRM. The solar water pump drive involves two stages of power conversion.

Analysis of the transverse vibration of a multistepped FGM beam resting on a Winkler foundation in a thermal environment and carrying concentrated masses

This paper examines a novel case study involving the free vibration of a stepped FGM beam-mass system resting on elastic foundations and subjected to a nonlinear or uniform thermal load. The present study examines the complex interaction of thermal effects on dynamic behavior by varying the cross-section and length ratios, material parameters and mass magnitudes. After adopting Euler-Bernoulli's theory, the dynamic behavior of non-uniform FGM beams was investigated using the generalized finite element method (GFEM) and the Rayleigh quotient finite element method (RQFEM). In line with the objective set, relevant results derived from parametric studies, showcasing accentuated variation in dimensional frequency curves and bending moments, have been highlighted and discussed.

Observation of strangeness enhancement with charmed mesons in high-multiplicity pPb collisions at sNN=8.16 TeV

The production of prompt Ds+ and D+ mesons is measured by the LHCb experiment in proton-lead (pPb) collisions in both the forward (1.5&lt;y*&lt;4.0) and backward (−5.0&lt;y*&lt;−2.5) rapidity regions at a nucleon-nucleon center-of-mass energy of sNN=8.16 TeV. The nuclear modification factors of both Ds+ and D+ mesons are determined as a function of transverse momentum, pT, and rapidity. In addition, the Ds+ to D+ cross section ratio is measured as a function of the primary charged particle multiplicity in the event. An enhanced Ds+ to D+ production in high-multiplicity events is observed for the whole measured pT range, in particular at low pT and backward rapidity, where the significance exceeds six standard deviations. This constitutes the first observation of strangeness enhancement in charm quark hadronization in high-multiplicity pPb collisions. The results are also qualitatively consistent with the presence of quark coalescence as an additional charm quark hadronization mechanism in high-multiplicity proton-lead collisions. © 2024 CERN, for the LHCb Collaboration 2024 CERN

Tumor contour irregularity on preoperative CT predicts prognosis in renal cell carcinoma: a multi-institutional study

Radiology-based prognostic biomarkers play a crucial role in patient counseling, enhancing surveillance, and designing clinical trials effectively. This study aims to assess the predictive significance of preoperative CT-based tumor contour irregularity in determining clinical outcomes among patients with renal cell carcinoma (RCC). We conducted a retrospective multi-institutional review involving 2218 patients pathologically diagnosed with RCC. The training and internal validation sets included patients at Zhongshan Hospital between January 2009 and August 2019. The external test set comprised patients from the First Affiliated Hospital, Zhejiang University School of Medicine (January 2016 to January 2018), the Xiamen Branch of Zhongshan Hospital (November 2017 to June 2023), and the Cancer Imaging Archive. The contour irregularity degree (CID), quantified as the ratio of irregular cross-sections to the total tumor cross-sections, was analyzed for its prognostic relevance across different subgroups of RCC patients. A novel CID-based scoring system was developed, and its predictive efficacy was evaluated and compared with existing prognostic models. The CID exhibited significant discriminatory power in predicting overall survival (OS), recurrence-free survival (RFS), and disease-specific survival (DSS) among patients with RCC tumors measuring 3cm or larger (all p<0.001). Multivariate analyses confirmed the CID as an independent prognostic indicator. Notably, the CID augmented prognostic stratification among RCC patients within distinct risk subgroups delineated by SSIGN models and ISUP grades. The CID-based nomogram (C-Model) demonstrated robust predictive performance, with C-index values of 0.88 (95%CI: 0.84-0.92) in the training set, 0.92 (95%CI: 0.88-0.98) in the internal validation set, and 0.86 (95%CI: 0.81-0.90) in the external test set, surpassing existing prognostic models. Routine imaging-based assessment of the CID serves as an independent prognostic factor, offering incremental prognostic value to existing models in RCC patients with tumors measuring 3cm or larger. This study was funded by grants from National Natural Science Foundation of China; Shanghai Municipal Health Commission; China National Key R&D Program and Science and Technology Commission of Shanghai Municipality.

Measurements of the 128Te(n, 2n)127m,gTe reaction cross sections and isomeric cross section ratio of 127m,gTe at the neutron energy of 14 MeV* *Supported by the National Natural Science Foundation of China (12165006, 12375295)

In this study, measurements of the 128Te(n, 2n)127m,gTe reaction cross sections and the computation of the isomeric cross section ratio were performed around the neutron energy of 13−15 MeV. We used a γ-ray spectrometric technique to conduct the measurements. The neutron energy was produced by the 3H(d,n)4He reaction. For the 128Te(n, 2n)127m,gTe reaction, the excited state, ground state, total cross section, and isomeric cross section ratio were determined using the TALYS-1.96 code, a theoretical nuclear model that allows for variations in density options. The initial experimental data, assessed nuclear data, and theoretical calculations based on the TALYS-1.96 algorithm were compared with the measurement results. The new data produced by this study are essential for validating nuclear models and establishing parameters for nuclear reactions.

Prompt neutron emission calculations for the photon induced reactions of 238U and 232Th in the giant dipole resonance energy region

Prompt emission calculations for the photon induced fission of 238U and 232Th in the GDR energy region were performed by using (a) a systematic of input parameters for the most probable fragmentation approach (obtained on the basis of only spontaneous and neutron induced fission of actinides) and (b) photo-fission cross section ratios (expressing the fission probabilities at incident energies where multiple fission chances are involved) provided by nuclear reaction calculations performed with the EMPIRE code. The prompt neutron emission results describe well the experimental data recently measured at the laser Compton-scattering γ-ray source of the NewSUBARU facility, validating the use of this input parameter systematic for photon induced fission, too. The modelings and procedures described in this paper can constitute an useful tool for the prediction of prompt neutron emission data in photon induced reactions without any experimental information.

Study of e+e−→ωX(3872) and γX(3872) from 4.66 to 4.95 GeV

Using data samples with an integrated luminosity of 4.5 fb−1 collected by the BESIII detector at center-of-mass energies ranging from 4.66 GeV to 4.95 GeV, we study the processes of e+e−→ωX(3872) and e+e−→γX(3872). With the e+e−→ωX(3872) process, the branching fraction ratio R≡B(X(3872)→γJ/ψ)B(X(3872)→π+π−J/ψ) is measured to be 0.38±0.20stat±0.01syst (R&lt;0.83 at 90% confidence level). In addition, we measure the ratio of the average cross section of e+e−→ωX(3872) to e+e−→ωχc1(ωχc2) to be σωX(3872)/σωχc1(σωX(3872)/σωχc2)=5.2±1.0stat±1.9syst(5.5±1.1stat±2.4syst). Finally, we search for the process of e+e−→γX(3872), and no obvious signal is observed. The upper limit on the ratio of the average cross section of e+e−→γX(3872) to e+e−→ωX(3872) is set as σγX(3872)/σωX(3872)&lt;0.23 at 90% confidence level. Published by the American Physical Society 2024

A New Possible Way to Detect Axion Antiquark Nuggets

The axion anti-quark nugget (AQ¯N) model was developed to explain in a natural way the asymmetry between matter and antimatter in Universe. In this hypothesis, a similitude between the dark and the visible components exists. The lack of observability of any type of dark matter up to now, in particular AQ¯Ns, requires finding new ways of detecting these particles, if they exist. In spite of strong interaction with visible matter, for such objects a very small ratio of cross section to mass is expected and thus huge detector systems are necessary. This paper presents a new idea for the direct detection of the AQ¯Ns using minerals as natural rock deposits acting as paleo-detectors, where the latent signals of luminescence produced by interactions of AQ¯Ns are registered and can be identified as an increased and symmetrical deposited dose. The estimates were made for minerals widely distributed on Earth, for which the thermoluminescence (TL) signal is intense and if the thermal conditions are constant and with low temperatures, the lifetime of the latent signals is kept for geological time scales.

Constraining kaon PDFs from Drell-Yan and J/ψ production

The kaon parton distribution functions (PDFs) are poorly known due to paucity of kaon-induced Drell-Yan data. Nevertheless, these Drell-Yan data suggest a softer valence u quark distribution of the kaon compared to that of the pion. We discuss the opportunity to constrain the kaon PDFs utilizing the existing kaon-induced J/ψ production data. We compare the K−/π− and K+/π+ cross-section ratio data with calculations based on two global-fit parametrizations and two recent theoretical predictions for the kaon and pion PDFs, and test the results with two quarkonium production models. The K−/π− cross-section ratio for J/ψ production provides independent evidence of different valence quark distributions in pion and kaon. The K+/π+J/ψ data are found to be sensitive to the gluon distribution in kaon. We show that these J/ψ production data provide valuable constraints for evaluating the adequacy of currently available sets of kaon PDFs.

Excitation functions and isomeric cross-section ratios of (d,xn) reactions on 86\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{86}$$\\end{document}Sr

Excitation functions of the 86\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{86}$$\\end{document}Sr(d,n)87m,87g\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{87m,87g}$$\\end{document}Y, 86\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{86}$$\\end{document}Sr(d,2n)86m,86g\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{86m,86g}$$\\end{document}Y and 86\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{86}$$\\end{document}Sr(d,3n)85m,85g\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{85m,85g}$$\\end{document}Y reactions on enriched 86\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{86}$$\\end{document}Sr target were measured by the activation technique up to deuteron energies of 49 MeV. The isomeric cross-section ratios as a function of projectile energy were deduced from the measured data for 87m\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{87m}$$\\end{document}Y, 87g\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{87g}$$\\end{document}Y(cum), 86m\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{86m}$$\\end{document}Y, 86g\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{86g}$$\\end{document}Y(cum), 85m\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{85m}$$\\end{document}Y and 85g\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{85g}$$\\end{document}Y pairs for the same energy range. All measurements are reported for the first time. The experimental data were compared with the data from the TENDL library which is based on TALYS calculation with default parameters. No satisfactory agreement was observed. Nuclear model calculations were then performed using the codes TALYS and EMPIRE with some parameter adjustments, and compared with the experimental data. The quality of the agreement between experimental data and model calculations was numerically quantified. In general, the data as well as the isomeric cross-section ratios are partially reproduced by the model calculations, provided the input model parameters are properly chosen and the level structure of the product nucleus is thoughtfully considered.

Effect of two quadriceps strengthening protocols on morphological characteristics of knee vastus muscles in patients with lateral patellar compression syndrome

IntroductionThe purpose of this study is to compare the effect of two types of quadriceps strengthening protocols on morphological characteristics of the knee vastus muscles in patients with lateral patellar compression syndrome. Methods48 female patients were randomly divided into 3 groups: selective (16), general (17) and control (15). The selective group participated in an isokinetic knee extension training protocol at the last 30° knee extension arc with maximum leg external rotation at high speed with the aim of selectively strengthening the vastus medialis muscle. The general group participated in an exercise protocol aimed at strengthening the entire quadriceps muscle. Both these protocols lasted 8 weeks. The control group did not receive any intervention. The vastus medialis and lateralis muscles cross-sections and fibers angles were measured using an ultrasound device. The data were analyzed using repeated-measures ANOVA and dependent t tests. ResultsAt pre-intervention, there were no differences between groups in muscles cross-sections and fiber angles (P > 0.05), but after interventions, in selective group, the vastus medialis cross-section and fiber angle, as well as vastus medialis to vastus lateralis cross-section ratio, were significantly higher than other groups (P < 0.01). Also, compared to pre-intervention, the vastus medialis cross-section and fiber angle increased only in selective group (P = 0.001), and the vastus lateralis cross-section increased only in general group (P = 0.001). Discussion and conclusionUse of isokinetic extension exercises targeting selectively strengthening the vastus medialis can improve the activity and involvement of this muscle-which is impaired in chronic patellofemoral joint disorders - by changing its morphology.

Measurement of associated J/ψ-ψ(2S) production cross-section in pp collisions at s\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$ \\sqrt{s} $$\\end{document} = 13 TeV

The cross-section of associated J/ψ-ψ(2S) production in proton-proton collisions at a centre-of-mass energy of s\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$ \\sqrt{s} $$\\end{document} = 13 TeV is measured using a data sample corresponding to an integrated luminosity of 4.2 fb−1, collected by the LHCb experiment. The measurement is performed for both J/ψ and ψ(2S) mesons having transverse momentum pT< 14 GeV/c and rapidity 2.0 < y < 4.5, assuming negligible polarisation of the J/ψ and ψ(2S) mesons. The production cross-section is measured to be 4.5 ± 0.7 ± 0.3 nb, where the first uncertainty is statistical and the second systematic. The differential cross-sections are measured as functions of several kinematic variables of the J/ψ-ψ(2S) candidates. The results are combined with a measurement of J/ψ-J/ψ production, giving a cross-section ratio between J/ψ-ψ(2S) and J/ψ-J/ψ production of 0.274 ± 0.044 ± 0.008, where the first uncertainty is statistical and the second systematic.

Multiplicity dependence of σψ(2S)/σJ/ψ in pp collisions at s\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$ \\sqrt{s} $$\\end{document} = 13 TeV

The ratio of production cross-sections of ψ(2S) over J/ψ mesons as a function of charged-particle multiplicity in proton-proton collisions at a centre-of-mass energy s\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$ \\sqrt{s} $$\\end{document} = 13 TeV is measured with a data sample collected by the LHCb detector, corresponding to an integrated luminosity of 658 pb−1. The ratio is measured for both prompt and non-prompt ψ(2S) and J/ψ mesons. When there is an overlap between the rapidity ranges over which multiplicity and charmonia production are measured, a multiplicity-dependent modification of the ratio is observed for prompt mesons. No significant multiplicity dependence is found when the ranges do not overlap. For non-prompt production, the ψ(2S)-to-J/ψ production ratio is roughly independent of multiplicity, irrespective of the rapidity range over which the multiplicity is measured. The results are compared to predictions of the co-mover model and agree well except in the low multiplicity region. The ratio of production cross-sections of ψ(2S) over J/ψ mesons are cross-checked with other measurements in di-lepton channels and found to be compatible.

Novel cross section ratios as possible signals of saturation in ultraperipheral collisions

We propose new cross section ratios in ultraperipheral A+A and p+A collisions (UPCs) as a potential experimental signal of saturation physics. We consider the ratio R1 of elastic vector meson photoproduction cross section to the inclusive hadron or jet photoproduction cross section. The ratio can be measured in the γ+A and γ+p collisions taking place in the UPCs. We label the ratios R1(A) and R1(p), respectively. Constructing the double ratio RUPC(A)=R1(A)/R1(p), and performing a small-x calculation both in the quasiclassical approximation and by including small-x evolution, we observe that RUPC(A) exhibits a markedly different dependence on the nuclear atomic number inside and outside the saturation region. This result indicates that RUPC(A) and R1(A) measurements in UPCs may help in the experimental searches for the evidence of saturation physics. Published by the American Physical Society 2024

Novel Measurement of the Neutron Magnetic Form Factor from A=3 Mirror Nuclei.

The electromagnetic form factors of the proton and neutron encode information on the spatial structure of their charge and magnetization distributions. While measurements of the proton are relatively straightforward, the lack of a free neutron target makes measurements of the neutron's electromagnetic structure more challenging and more sensitive to experimental or model-dependent uncertainties. Various experiments have attempted to extract the neutron form factors from scattering from the neutron in deuterium, with different techniques providing different, and sometimes large, systematic uncertainties. We present results from a novel measurement of the neutron magnetic form factor using quasielastic scattering from the mirror nuclei ^{3}H and ^{3}He, where the nuclear effects are larger than for deuterium but expected to largely cancel in the cross-section ratios. We extracted values of the neutron magnetic form factor for low-to-modest momentum transfer, 0.6<Q^{2}<2.9 GeV^{2}, where existing measurements give inconsistent results. The precision and Q^{2} range of these data allow for a better understanding of the current world's data and suggest a path toward further improvement of our overall understanding of the neutron's magnetic form factor.

Nonlinear analysis of unimorph piezoelectric nanobeam with a variable cross-section and flexoelectric effect

An analytical method is presented to investigate the nonlinear electromechanical coupling response of an unimorph piezoelectric nanobeam with a variable cross-section, taking into account the flexoelectric effect. Considering the geometric nonlinearity, strongly nonlinear governing equation with variable coefficients is derived using the energy variation method and solved by the differential quadrature method. The nonlinear effects of geometric nonlinearity, electromechanical loadings, flexoelectric effect and width ratio on the electromechanical coupling response are analyzed in detail. The results show that under different loadings, the flexoelectric parameter and width ratio have distinct effects on the electromechanical response of the piezoelectric variable cross-section nanobeam. When the mechanical loads are applied on the nanobeam, a larger flexoelelctric parameter results in a greater bending deflection and higher output of electric field and polarization. The width ratio of variable cross-section can also influence the bending deflection, but its impact on the output of electric field and polarization is limited. When the applied voltage loads are applied to the nanobeam, the bending direction can be controlled by the applied voltage, flexoelectric parameter or width ratio. Due to the strongly nonlinear governing equation, these results in this study differ significantly from those of piezoelectric nanobeam with uniform cross-section. This study can contribute to the understanding of electromechanical coupling response in piezoelectric variable cross-section nanobeam with flexoelectric effect. Additionally, it can be helpful in guiding the structure optimization of piezoelectric nanodevices.