Rate Of Sediment Input Research Articles

Decapod crustacean diversity through time and space in a middle-upper Eocene carbonate-siliciclastic platform (southern Jaca Basin, Pyrenees, Spain)

The south-central margin of the Jaca Basin (South-central Pyrenees, Spain) offers well-exposed outcrops ideal for studying the distribution of decapod crustaceans across a mixed carbonate-siliciclastic depositional system during the middle-late Eocene (Bartonian-Priabonian). This study encompasses an area of 1000 km2, featuring environments from siliciclastic coastal plains and deltaic complexes to shallow carbonate and mixed platforms, including coral reefs, extending to prodelta/outer platform deeper conditions. Detailed sampling in four depositional sequences yielded 372 fossil decapod specimens from various lithofacies across 20 localities.Our analysis identifies 39 decapod species within 22 families and demonstrates ecological zonation of decapods in shallow to relatively deep environments. Diversity peaks in siliciclastic shallow proximal prodelta areas and carbonate bryozoan meadows. Species distribution between carbonate and siliciclastic facies is similar, though taxonomically distinct. Articulated specimens predominantly occur in shallow proximal and relatively deep distal siliciclastic areas, linked to sudden sediment input and high sedimentation rates. These findings elucidate the spatial and temporal distribution factors of decapod crustaceans during the middle-late Eocene, contributing to the broader understanding of palaeoecological patterns in mixed depositional systems.

Late syn‐rift to early post‐rift basin fill dynamics of a mixed siliciclastic‐carbonate succession banked to a basement high, Hornsund, southwestern Spitsbergen, Arctic Norway

AbstractThe transition from syn‐rift to post‐rift sedimentation in rift basins is difficult to characterize in terms of stratigraphic architecture and dominating control on sedimentation, due to decreasing tectonic activity interplaying with regional subsidence, eustatic sea level changes, and differential compaction of underlying syn‐rift sediments. Our case study of the Late Palaeozoic Inner Hornsund Fault Zone targets late syn‐rift strata recorded in the (?Pennsylvanian – ?lower Permian) Treskelodden Formation in Hornsund, southern Spitsbergen, representing a mixed siliciclastic‐carbonate succession, with siliciclastics primarily sourced from the adjacent Sørkapp‐Hornsund High. We document local scale (<10 km) facies variability, sequence stratigraphy, and evolution of a succession deposited along a flank of the structural high during the late syn‐rift stage. We observe that during the transition towards rift termination (glacio‐)eustatic sea level changes and overall regional flooding became a more prominent forcing factor controlling sedimentation. Our dataset includes sedimentary logs, microfacies analysis, and high‐resolution digital outcrop models. We identify four progressively backstepping stratigraphic sequences, reflecting an evolution from (1) terrestrial siliciclastics through (2–3) nearshore mixed siliciclastic–carbonates, to (4) carbonate ramp deposits. On the small scale (<5 m) the internal sediment cyclicity of the succession was formed by autogenic processes, particularly the changing rate of sediment input from the southwestern source area (the uplifted Sørkapp‐Hornsund basement high). On the larger scale (10s of m), the importance of glacio‐eustatic sea‐level changes, driven by waxing and waning of ice caps in the southern hemisphere (Gondwana), increased as the rift‐related tectonics decreased. The interdisciplinary methods used in this study provide new knowledge of the Middle Pennsylvanian to Permian depositional evolution in southern Spitsbergen, besides a novel framework for comparison to adjacent basins in the region and similar basins elsewhere.

Effects of initial and boundary conditions on gravel-bed river morphology

Assuming that the equilibrium geometry of river channels does not depend on their initial state but solely on boundary conditions, several formulas have been derived that relate the channel depth and width to the river bankfull discharge and bed material. However, due to the existence of a threshold for sediment motion and the strong non-linearity between sediment transport and flow rate, this assumption might not be generally valid for gravel-bed rivers. This research clarifies the role of the initial conditions, more specifically the initial channel width, on the geometry of gravel-bed rivers considering a variety of boundary conditions. The approach includes laboratory experiments and two-dimensional modeling, reproducing the evolution of alluvial channels with different starting widths, discharge regimes and sediment input rates. The experiments represent the Arc River (France). Thus, the characteristics of this river were used in the numerical model to obtain a realistic virtual case complementing the experiments. Different boundary and starting conditions resulted in either braided or single-thread channels. We found that the initial width strongly influences the evolution process and leaves a footprint on the river braid-belt extension. The active width of braided systems and the width of single-thread channels do not depend on the starting condition. They depend on sediment input rather than on discharge variability. Different initial widths result in different final bed levels. This indicates that the initial channel width may affect the degree of channel incision or aggradation. The results of this study justify the use of equilibrium formulas for single-thread rivers.

Impacts of agricultural expansion on floodplain water and sediment budgets in the Mekong River

In this paper, we address the impact of agricultural expansion on hydrological patterns of water and sediment budget in one of the largest floodplains along the Cambodian Mekong since the 1980s, using field (water level, discharge, sediment, rainfall, and groundwater level) and remote sensing (land use, surface suspended sediment) data, and numerical simulations. Specifically, while both the surface suspended sediment concentration and water level in the Mekong River around Kampong Cham and Neak Luong decreased, the floodplain seasonal water storage increased. In addition, the rate of sediment input from the river to the floodplain was almost constant throughout the studied period. The investigation of the floodplain’s annual sediment budget, however, reveals a significant drop during the analyzed period, mainly due to the decreased sediment trapping rate (66% in the 1980s to 46% in the 2010s). Currently, a good amount of sediment bypass the floodplain and return back to the river. The observed hydrological patterns in the floodplain could have been triggered by the agricultural expansion that has increased surface erodibility (due to removals of primary vegetation) and lowered the land surface elevation (due to groundwater extraction). Despite the well-known impacts of the hydropower dams on the Mekong Delta hydrological conditions, particularly the reduction of sediment reaching the delta due to sediment trapping by dam reservoirs, our observations point to new and more localized driving factors of sediment deficit in floodplain: agricultural expansion. Finally, we used 2D hydrodynamic simulation (Telemac-2D) to visualize the processes of water routing and sedimentation in the floodplain accounting for land cover change since the 1980s. The floodplain hydrology reported in this paper is an unexplored environmental consequence of agricultural expansion in the lower Mekong. Geomorphologically, this study presents a peculiar case of floodplain showing how agricultural expansion can diminish the role of a floodplain as a sediment sink through decreasing the trapping rate.

Hybrid dry-wet interdune deposition in Precambrian aeolian systems: Galho do Miguel Formation, SE Brazil

It is currently not known whether the construction and accumulation of Precambrian aeolian interdunes occurred in the same way as for their Phanerozoic counterparts. To investigate this, a Mesoproterozoic aeolian succession, the Galho do Miguel Formation (SE Brazil), was studied using facies and architectural-element analyses. The sedimentary succession comprises deposits of simple dunes, draas (megadunes), and dry and wet interdunes. Dry and wet aeolian sub-environments were coeval and their development was likely controlled by local topographic relief that governed a hybrid dry-wet aeolian system. The dry sub-environment was composed of interconnected interdune corridors between large and well-developed bedforms (simple dunes and draas). The water table did not influence the construction of climbing dunes and dry interdunes, but this was fundamental for long-term aeolian accumulation. Due to the proximity of the water table to the depositional surface, the dry interdune flats were eroded only up to the groundwater level, where the wetness inhibited sand removal during dune migration. This condition enabled the accumulation of thick packages of dry interdune deposits (up to 3 m thick). The wet sub-environment is represented by extensive interdune flats, non-climbing dunes, and a continuously near-surface water table. In this context, the interdune deposits underwent only minimal reworking associated with dune migration. This setting allowed the progressive rise of the interdune substrate and the amalgamation of interdune deposits of different generations, thereby producing thick wet-interdune stratal packages (up to 8 m thick). The accumulation of thick packages of interdune strata in both sub-environments was generated by: (i) high rates of vertical accumulation of the interdune substrate due to high rates of sediment input for aeolian construction in Precambrian systems, and (ii) progressive relative rise of the water table. These conditions enabled the long-term accumulation and successive preservation of Precambrian aeolian systems, in which the stabilising effects of vegetation did not operate. Therefore, the aeolian architecture of the Galho do Miguel Formation suggests that: (i) Precambrian aeolian systems probably produced thicker dry and wet interdune deposits than their Phanerozoic counterparts, and (ii) hybrid dry-wet aeolian systems likely provided the most favourable conditions for long-term accumulation and successive preservation of these types of deposit in the Proterozoic.

The Capiru Group: From passive margin to syn-orogenic units, implications for the evolution of the northern margin of the Curitiba microplate, Western Gondwana

The Capiru Group (Neoproterozoic) is a 4 km-thick succession deposited on the northern margin of the Curitiba microplate, Southern Ribeira Belt, Brazil. The Capiru Group successions are deformed within the Brasiliano - Pan African Ribeira Belt, which culminated in the amalgamation of Western Gondwana. Even though the rocks are metamorphosed and deformed, preserved sedimentary structures and outcrop exposures allowed the interpretation of depositional environments and stratigraphic analysis. The Capiru Group metasedimentary rocks were studied by field mapping, measured sections and bulk-rock chemical compositions. Six formations were identified, termed from oldest to youngest as: Santana (proximal to distal marine shelf), Juruqui (proximal to distal deltaic), Rio Branco (carbonate platform), Morro Azul (lagoonal to shallow marine), Morro Grande (proximal to distal deltaic/marine) and Bocaina formations (estuarine to shallow-marine). Two main basin stages were identified: a passive continental margin stage, with increasing tectonic quiescence followed by a marine regression, and a syn-orogenic stage at the Curitiba microplate margin.Chemical and mineralogical Fe- and Al-rich compositions suggest continental denudation during the passive continental margin stage, with low sediment input rates from a relatively low-gradient relief, highly weathered continental source, and stability since Mesoproterozoic time. Sedimentological and stratigraphic similarities were found among Capiru Group passive margin successions and units deposited on the Río de Plata and Southern Paranapanema margins.The paleoenvironmental interpretations, such as greenhouse conditions and high weathering rates alternated with depositional gaps, indicate climatic changes during the Capiru Group deposition, with far-field or Phantom Glacial influence related to the regional discordances. These features are important for the paleogeographic reconstructions that must consider a tropical or equatorial position ∼650 - 635 Ma for the Curitiba microplate.During deposition of the Bocaina Formation, the arkosic composition of sandstones and lithic conglomerate lags suggest source rejuvenation during the syn-orogenic stage, prior to the collisional thrusting that led to the Western Gondwana assembly.

Thermochronology in South America

The Capiru Group (Neoproterozoic) is a 4 km-thick succession deposited on the northern margin of the Curitiba microplate, Southern Ribeira Belt, Brazil. The Capiru Group successions are deformed within the Brasiliano - Pan African Ribeira Belt, which culminated in the amalgamation of Western Gondwana. Even though the rocks are metamorphosed and deformed, preserved sedimentary structures and outcrop exposures allowed the interpretation of depositional environments and stratigraphic analysis. The Capiru Group metasedimentary rocks were studied by field mapping, measured sections and bulk-rock chemical compositions. Six formations were identified, termed from oldest to youngest as: Santana (proximal to distal marine shelf), Juruqui (proximal to distal deltaic), Rio Branco (carbonate platform), Morro Azul (lagoonal to shallow marine), Morro Grande (proximal to distal deltaic/marine) and Bocaina formations (estuarine to shallow-marine). Two main basin stages were identified: a passive continental margin stage, with increasing tectonic quiescence followed by a marine regression, and a syn-orogenic stage at the Curitiba microplate margin.Chemical and mineralogical Fe- and Al-rich compositions suggest continental denudation during the passive continental margin stage, with low sediment input rates from a relatively low-gradient relief, highly weathered continental source, and stability since Mesoproterozoic time. Sedimentological and stratigraphic similarities were found among Capiru Group passive margin successions and units deposited on the Río de Plata and Southern Paranapanema margins.The paleoenvironmental interpretations, such as greenhouse conditions and high weathering rates alternated with depositional gaps, indicate climatic changes during the Capiru Group deposition, with far-field or Phantom Glacial influence related to the regional discordances. These features are important for the paleogeographic reconstructions that must consider a tropical or equatorial position ∼650 - 635 Ma for the Curitiba microplate.During deposition of the Bocaina Formation, the arkosic composition of sandstones and lithic conglomerate lags suggest source rejuvenation during the syn-orogenic stage, prior to the collisional thrusting that led to the Western Gondwana assembly.

Halokinetic modulation of sedimentary thickness and architecture: A numerical modelling approach

AbstractSubsurface salt flow can deform overlying strata and influence contemporaneous sedimentary systems. Studying salt‐sediment interactions is challenging in the subsurface due to poor imaging adjacent to salt, and in the field due to the dissolution of halite. Discrete Element Modelling provides an efficient and inexpensive tool to model stratigraphy and deformation around salt structures, which is advantageous over other modelling techniques as it realistically recreates brittle processes such as faulting. Six 2D experiments were run representing 4.6 Myr to determine the effect of salt growth on syn‐kinematic stratigraphy. Halokinetic deformation of stratigraphic architecture was assessed by varying sediment input rates through time. Results show the realistic formation and evolution of salt‐related faults which define a zone of halokinetic influence ca. 3 times the width of the initial diapir. Outside of this, early diapiric and syn‐kinematic stratigraphy are undeformed. Within this zone, syn‐kinematic strata are initially isolated into primary salt withdrawal basins, onlapping and thinning towards the salt‐cored high. In most models, syn‐kinematic strata eventually thin across and cover the diapir roof. Thinning rates are up to six times greater within 350 m of the diapir, compared to further afield, and typically decrease upwards (with time) and laterally (with distance) from the diapir. Outputs are compared to a subsurface example from the Pierce field, UK North Sea, which highlights the importance of considering local fluctuations in diapir rise rate. These can create stratigraphic architectures that may erroneously be interpreted to represent increases/decreases in sedimentation rate. Exposed examples, such as the Bakio diapir, northern Spain, can be used to make inferences of the expected depositional facies, below model resolution. Our models aid the prediction of sedimentary unit thickness and thinning rates and can be used to test interpretations arising from incomplete or low‐resolution subsurface and outcrop data when building geological models for subsurface energy.

Effect of fish pond drainage on turbidity, suspended solids, fine sediment deposition and nutrient concentration in receiving pearl mussel streams.

Extensive fish production in earthen ponds is a common aquaculture practice, which requires draining of the ponds for fish harvesting. Despite their value for biodiversity and water retention, the impact of fish ponds on the receiving streams as regards fine sediment and nutrient pollution remains controversial. This holds particularly true for streams with endangered freshwater pearl mussels, requiring a highly permeable streambed with low fine sediment content for successful juvenile development. This study quantified the amount of fine sediment, suspended solids and nutrients delivered to pearl mussel streams in relation to the pond characteristics, distance to the receiving stream and applications of measures to prevent the input of fines. Comparing fine sediment deposition above and downstream of the pond inlets after 21 pond drainage operations, as well as continuous measurements of the turbidity for 12 operations revealed varying effects of pond fishing on the receiving streams. Average fine sediment deposition was increased by nearly six-fold compared to upstream and maximum turbidity values for single drainage operations exceeded 460 NTU. Draining between 1% and 92% of the water volume of individual ponds resulted in additional loading of 0.07-4.6t suspended particles. Physical mitigation structures that prevent mobilized material from reaching the receiving stream significantly reduced the fine sediment input and deposition rates. Harvesting methods that do not require complete drainage of the pond reduced the turbidity by ten-fold. Without mitigation measures, the impact of pond drainage operations on the fine sediment deposition was comparable to high discharge events. No significant increase in nutrient concentration was observed during most drainage operations. These results reveal remarkable effects of pond drainage on the aquatic environment, as well as the possibility to minimize such impacts by switching to harvest methods that do not require complete pond drainage and installation of sedimentation structures.

Forward numerical modelling constraining environmental parameters (Aptian carbonate system, E Iberia)

The facies distribution in time and space of sedimentary successions is controlled by a complex interplay between physical, chemical and biological processes, which are nowadays difficult to construe from the geological record. Numerical models constitute a valuable tool to identify and quantify such controlling factors permitting a reliable 3D extrapolation and prediction of stratigraphic and facies architectures beyond outcropping rock strata. This study assesses the roles of three controlling parameters being carbonate production rate, relative sea-level changes and terrigenous clastic sediment supply, on the evolution of an Aptian carbonate system. The SIMSAFADIM-CLASTIC, a 3D process-based sedimentary-stratigraphic forward model, was used for this evaluation. The carbonate succession modelled crops out in the western Maestrat Basin (E Iberia), and corresponded to a platform-to-basin transition comprising three depositional environment-related facies assemblages: platform top, slope and basin. Testing of geological parameters in forward modelling results in a wide range of possible 3D geological scenarios. The documented distribution of facies and sequence-stratigraphic framework combined with a virtual outcrop model were used as a reference to perform geometric (quantitative) and architectural and stacking pattern (qualitative) research by model-data comparison. The time interval modelled spans 1450 ky. The best-fit simulation run characterizes and quantifies (1) relative sea-level fluctuations recording five different genetic types of deposit (systems tracts) belonging to two depositional sequences as expected from field-data analysis, (2) a rate of terrigenous clastic sediment input ranging between 0.5 and 2.5 gr/s, and (3) a mean autochthonous carbonate production maximum rate of 0.08 m/ky. Furthermore, the quantitative and qualitative sensitivity tests carried out highlight that the fluctuation of relative sea level exerted the main control on the resulting stratigraphic and facies architectures, whereas the effect of inflowing terrigenous clastic sediment is less pronounced. Facies assemblages show different sensitivities to each parameter, being the slope carbonates more sensitive than the platform top facies to inflowing fine terrigenous sediments. On slope depositional settings, siliciclastic input also controls stratal stacking patterns and the dimensions of the carbonate bodies formed. The final 3D model allows to spot architectural features such as stacking patterns that can be misinterpreted by looking at the resulting record in the outcrop or by using other 2D approaches, and facilitates the comprehension of reservoir connectivity highlighting the occurrence of initial disconnected regressive platforms, which were later connected during a transgressive stage.

Depositional and organic carbon-controlled regimes during the Coniacian-Santonian event: First results from the southern Tethys (Egypt)

Abstract Geochemical and palynological proxies were determined for 31 samples representing the upper Coniacian-lowermost Campanian Abu Roash A Member, collected from the BED2-3 well. This was done to assess the prevailing paleoredox conditions, productivity levels, and water-column settings to: (1) understand controls and mechanisms related to accumulation of organic carbon within the sedimentary record; (2) assess principal environmental processes that triggered the preservation of organic matter-poor, calcareous shale and limestone facies of the Abo Roash A Member; and (3) to interpret the paleoceanographic settings and confirm the occurrence of either Oceanic Anoxic Event 3 (OAE3) or Cretaceous Oceanic Red Beds (CORBs) within the Abu Gharadig Basin in the southern part of the Tethyan Ocean, Egypt. Sedimentation rates were reconstructed based on the biostratigraphic-age constraints of marine dinoflagellate cysts (dinocysts). Trace elements-based ratios and relationships were used in order to study the role of clastic terrestrial input. Three groups of dinocysts and freshwater Pediastrum algae were used to study the water-column conditions. Results showed that the Abu Roash A Member was deposited under oxic to intermittently dysoxic conditions in a distal inner to middle neritic environment, with varying sedimentation rates from 32 to 119 mm kyr−1. Productivity appeared to be a significant factor for determining magnitudes of the organic carbon accumulation; however, low productivity was prevalent during deposition. Carbonate content was high, which resulted in dilution of organic matter during varied rates of sediment input. Such results indicate that the paleoceanographic conditions in the southern Tethys witnessed the absence of prevalent oceanic anoxia (i.e., the Coniacian-Santonian OAE 3) and deposition of the CORBs as in several parts of the Tethys, the Pacific, and the Indian oceans.

A method to estimate the longshore sediment transport at ebb‐tidal deltas based on their volumetric growth: Application to the Guadiana (Spain–Portugal border)

AbstractCurrent techniques assessing longshore sediment transport rates have large uncertainties, pleading for the development of alternative and complementary approaches. The present study proposes a method to estimate the decadal average rate of longshore transport at modern ebb‐tidal deltas based on a sediment budget analysis of the outer shoal growth. This transport is obtained as the balance of the other contributions to the shoal with the total sediment input rate obtained from an inverse application of the inlet reservoir model. The method is applied to the Guadiana ebb‐tidal delta, yielding an average longshore sediment transport rate (~85 000 m3 year−1) in good agreement with expectations for the region. It is exemplified that this decadal averaged rate can be used to improve longshore sediment transport expressions in order to study its variability over shorter time scales. At the Guadiana, the yearly longshore sediment transport from the improved formula ranges from ~25 000 m3 (westward) to ~245 000 m3 (eastward) and is related to the North Atlantic Oscillation index. Overall, the proposed method constitutes an alternative tool to constrain the average longshore sediment transport rate over decades in the vicinity of tidal inlets. It is applicable to ebb‐tidal deltas where the outer shoal growth (from an early to a mature stage) is well documented by bathymetric maps, and where the main transport pathways towards the outer shoal can be specified. © 2019 John Wiley & Sons, Ltd. © 2019 John Wiley & Sons, Ltd.

THE FLUVIAL SYSTEM ON THE EAST EUROPEAN PLAIN: SEDIMENT SOURCE AND SINk

The modern fluvial system on the lowland East European Plain is of depositional type. Sediment transport to the seas is only a few percent of the total erosion, and the main part of eroded material is accumulated in the channels. The recent deposition of suspended sediments is caused by accelerated soil erosion on the arable slopes, which led to a high rate of lateral sediment input and deposition at the river headwaters and on the floodplains. The process of accumulation is facilitated by the unfilled “negative” volume of the net of dry valleys formed during the Late Glacial catastrophic erosion event. Such events of catastrophic erosion of the sediments deposited in the lowland fluvial systems occur with a frequency of 100-120 thousand years. In the conditions of both scarce vegetation and extremal surface runoff, the entire fluvial systems become the area of intensive erosion, with the deep incision of gullies and of the river channels. Therefore, despite the modern intensive deposition, delivery ratio for the fluvial systems on this lowland territory is close to one in the long-term perspective.

Late Wisconsinan grounding zones of the Laurentide Ice Sheet margin off the Québec North Shore (NW Gulf of St Lawrence)

Abstract Swath bathymetry data and seismic profiles collected in the NW Gulf of St Lawrence reveal a series of wedge-shaped depositional systems interpreted as grounding zone wedges (GZWs). Some segments of the GZWs change locally to form frontal moraines, or morainal banks, and subaqueous ice-contact fans, reflecting changes in either the nature of the ice margin or the rate of sediment input. These grounding zones (GZ) of the ice margin extend laterally along three isobaths at depths of 180 (GZ1), 120 (GZ2) and 80 (GZ3) m (±20 m) along the Québec North Shore shelf, the 120 m-deep GZ2 system being traceable over a distance of >300 km. Associated GZWs can occur in three geometries along a same isobath system: curvilinear, lobate and shelf-break. GZ systems were built during three distinct stages of stabilization of the marine-based southeastern margin of the Laurentide Ice Sheet following its rapid retreat across the deeper waters of the Laurentian Channel in the Gulf of St Lawrence after 14.8 cal ka BP. The occurrence of GZ along distinct isobaths indicates that bathymetry exerted a strong control on ice stabilization during deglaciation by reducing the relative water depth at the ice margin and thereby the buoyancy and rate of iceberg calving. However, fluctuations and re-advances of the ice margin are also recorded by the overprinting of a portion of the GZ2 system by the younger GZ3 system, potentially suggesting an additional response to climate-driven forcing.

Effects of Marsh Edge Erosion in Coupled Barrier Island‐Marsh Systems and Geometric Constraints on Marsh Evolution

AbstractPrevious results show that overwash provides an important sediment source to back‐barrier marshes, sustaining a narrow marsh state under conditions in which marsh drowning would otherwise occur. We expand the coupled barrier island‐marsh evolution model GEOMBEST+ to explore the effects of wind waves on back‐barrier marshes. We find that the addition of marsh edge erosion leads to wider, more resilient marshes and that horizontal erosion of the marsh edge is a more efficient sediment source than vertical erosion of the marsh surface as it drowns. Where marshes and bays are vertically keeping up with sea level, and the net rate of sediment imported to (or exported from) the basin is known, the rate of marsh edge erosion or progradation can be predicted knowing only the present basin geometry, sea level rise rate, and the net rate of sediment input (without considering the erosion or progradation mechanisms). If the rate of sediment input/export is known, this relationship applies whether sediment exchange with the open ocean is negligible (as in basins dominated by riverine sediment input) or is significant (including the loss of sediment remobilized by waves in the bay). Analysis of these results reveals that geometry and stratigraphy can exert a first‐order control on back‐barrier marsh evolution and on the marsh‐barrier island system as a whole and provides new insights into the resilience of back‐barrier marshes and on the interconnectedness of the barrier‐marsh system.

Challenges in constraining ages of fluvial terraces in the Vienna Basin (Austria) using combined isochron burial and pIRIR225 luminescence dating

Burial dating with terrestrial cosmogenic nuclides and luminescence dating techniques have become two powerful tools to temporally constrain Quaternary deposits. A combination of both methods at the same geological setting has rarely been realized to date, although their viable time frames overlap by several tens of thousands of years. When Middle Pleistocene sediments with depositional ages ranging around ca. 120 ka to ca. 300 ka are targeted, both methods are employed, but come towards their lower and upper limits, respectively. A combined dating approach can be worthwhile at this age range and allows not only exploring the edges of both methods, but holds the opportunity to do a cross-check of results at an age spectrum, where both dating techniques are at risk to become fuzzy.Here we present a case study where numerical ages of two Middle Pleistocene terraces located in the Vienna Basin were generated by combining burial and luminescence dating. A variety of processes, such as changing sediment input rates, erosion, and tectonics controlled the formation of fluvial terraces in the basin and shaped its complex modern surface. Age correlation of the evolved mosaic of blocks and dislocated sediment bodies is challenging and requires quantitative geochronological information in order to establish a coherent terrace stratigraphy. Luminescence and burial samples originating from two fluvial terraces, the lower Gaenserndorf terrace (GDT) and the higher Schlosshof terrace (SHT), were analyzed and evaluated. Luminescence and burial ages at the GDT site are in good agreement and suggest a depositional age of 140 ± 170 ka bracketed by pIRIR225 luminescence ages ranging from 120 ± 10 ka to 260 ± 30 ka. Luminescence samples at the SHT site are in saturation, but provide minimum ages, which are coherent with the burial dating result of 340 ± 170 ka. The new numerical ages indicate that the vertical offset between the GDT site and the SHT site was not purely caused by fault activity, but suggest two independent episodes of sediment accumulation.Besides providing new insights into the stratigraphic and morphological configuration of the central Vienna Basin area, the cosmogenic nuclide data set is compelling from a methodological point of view. At the GDT site, several samples exhibited 26Al/10Be nuclide ratios exceeding the surface production ratio of 6.75. Even though affected samples were excluded from burial age calculations, a detailed investigation on possible scenarios, which could have caused an upwards shift of 26Al/10Be ratios, was carried out.

Sediment Transport Time Scales and Trapping Efficiency in a Tidal River

AbstractObservations and a numerical model are used to characterize sediment transport in the tidal Hudson River. A sediment budget over 11 years including major discharge events indicates the tidal fresh region traps about 40% of the sediment input from the watershed. Sediment input scales with the river discharge cubed, while seaward transport in the tidal river scales linearly, so the tidal river accumulates sediment during the highest discharge events. Sediment pulses associated with discharge events dissipate moving seaward and lag the advection speed of the river by a factor of 1.5 to 3. Idealized model simulations with a range of discharge and settling velocity were used to evaluate the trapping efficiency, transport rate, and mean age of sediment input from the watershed. The seaward transport of suspended sediment scales linearly with discharge but lags the river velocity by a factor that is linear with settling velocity. The lag factor is 30–40 times the settling velocity (mm s−1), so transport speeds vary by orders of magnitude from clay (0.01 mm s−1) to coarse silt (1 mm s−1). Deposition along the tidal river depends strongly on settling velocity, and a simple advection‐reaction equation represents the loss due to settling on depositional shoals. The long‐term discharge record is used to represent statistically the distribution of transport times, and time scales for settling velocities of 0.1 mm s−1 and 1 mm s−1 range from several months to several years for transport through the tidal river and several years to several decades through the estuary.

A mobile pool of contaminated sediment in the Penobscot Estuary, Maine, USA

The natural recovery of estuaries from contamination is largely determined by the timescale over which contaminated sediment is exported or buried and replaced by cleaner sediment that enters from the watershed or the ocean. That timescale depends on the size of the “pool” of contaminated sediment that resides in the estuary. The larger the pool, the longer the recovery timescale for a given rate of sediment input. A field study was undertaken as part of a study of mercury contamination in the Penobscot estuary to assess the mechanisms affecting the transport and fate of contaminated sediment. Based on measurements of water properties, currents and sediment transport and seabed samples analyzed for sediment properties and contaminant concentrations, a “mobile pool” of contaminated sediment with relatively uniform geochemical characteristics along a 20-km reach of the estuary was identified. This pool of sediment is mobilized seasonally by resuspension and trapping processes associated with salinity fronts that vary in location with discharge conditions. Sediment is transported down-estuary during high discharge and up-estuary during low discharge, with seasonal, bi-directional transport of sediment in the estuary significantly exceeding the annual input of new sediment from the watershed. This continual, bi-directional transport leads to homogenization of the chemical properties of the mobile sediment, including contaminant concentrations. The large mass of mobile sediment relative to the input of sediment from the watershed helps explain the long recovery timescale of contaminants in the Penobscot estuary.

Infiltration of fine sediment into a coarse mobile bed: a phenomenological study

AbstractExperiments were undertaken to study the nature of granular interaction in running water by examining the influence of fine grain inputs to a coarser sediment bed with a mobile surface. Video recordings of grain sorting by both kinetic sieving and spontaneous percolation are used to diagnose the critical processes controlling the overall bed response. Kinetic sieving takes place in the mobile bed surface, with the finer sediment moving to the bottom of the bedload transport layer at the interface with the underlying quasi‐static coarse bed. We show that the behavior at this interface dictates how a channel responds to a fine sediment input. If, by spontaneous percolation, the fine sediment is able to infiltrate into the underlying quasi‐static bed, the total transport increases and the channel degrades. However, if the fine sediment input rate exceeds the transport capacity or is geometrically unable to infiltrate into the underlying bed, it forms a quasi‐static layer underneath the transport layer that inhibits entrainment from the underlying bed, resulting in aggradation and an increase in bed slope. Copyright © 2016 John Wiley & Sons, Ltd.

Middle to late-Holocene decreased fluvial aggradation and widespread peat initiation in the Ishikari lowland (northern Japan)

This study investigated the influence of sea-level and climate changes on the decreased fluvial aggradation and subsequent widespread peat initiation in the middle to late-Holocene in the Ishikari lowland, which is a coastal floodplain formed in response to the postglacial sea-level change. By introducing a new approach to separately evaluate the rates of organic and clastic sediment input, we demonstrated that the peat began to form when the fluvial sedimentation rate was significantly decreased (less than 0.6 mm/yr), while plant macrofossil analysis suggested that lowering of water level is also important to the peat initiation. Such changes in sedimentary environment may be associated with the abrupt abandonment of crevasse splays. The concentrated ages of the peat initiation around 5600–5000, 4600–4300, and 4100–3600 cal. BP suggest that an allogenic control promoted the abandonment of crevasse splays, and different onset ages can be explained by different fluvial responses of the Ishikari River and its tributaries. The abandonment of crevasse splays could result from sea-level fall or decreased precipitation. While submillennial sea-level fluctuations coincident with the peat initiation have not been reported in coastal lowlands of Japan, the close comparison of the onset ages and decreased precipitation recorded in a stalagmite from China, which represents the strength of the East Asian summer monsoon (EASM), suggests that decrease in precipitation led to the abandonment of crevasse splays. Our results may indicate that similar fluvial responses might be common in other coastal floodplains affected by the EASM.